User manual | DRA100 EU EN

Connections
Playback
Settings
Tips
Appendix
.
Contents
DRA-100
NETWORK RECEIVER
Owner’s Manual
You can print more than one page of a PDF onto a single sheet of paper.
Front panel
Rear panel
Remote control
unit
1
Index
Contents
Connections
Playback
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
High quality sound
Multiple music formats are supported, all in a compact form factor
Easy operation
Part names and functions
Front panel
Rear panel
Remote control unit
Front panel
Rear panel
Remote control
unit
Settings
Tips
Appendix
Connections
5
6
6
7
7
7
8
9
9
11
13
Speaker connection
Connecting the speaker cables
Connecting the subwoofer
Connecting speakers
Connecting an analog device
Connecting a digital device (Optical)
Connecting a digital device (Coaxial)
Connecting an amplifier
Connecting an iPod or USB memory device to the USB port
Connecting to a home network (LAN)
Wired LAN
Wireless LAN
Connecting the power cord
2
Index
17
17
18
18
19
20
21
22
23
25
25
26
28
Contents
Connections
Playback
Settings
Playback
Basic operation
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily
Listening to Internet Radio
Listening to Internet Radio
Playing the last played Internet Radio station
Using vTuner to add Internet Radio stations to favorites
Playing back files stored on a PC and NAS
Applying media sharing settings
Playing back files stored on a PC and NAS
Favorite function
Registering stations or files to the favorites list
Calling stations or files from the favorites list
To switch between registered stations and files during playback
Deleting stations or files from the favorite list
Playing an iPod
Listening to music on an iPod
Setting operation mode (“On-Display” mode)
Charging the iPod/iPhone
Playing a USB memory device
Playing files stored on USB memory devices
Front panel
Rear panel
Remote control
unit
Tips
Appendix
Listening to music on a Bluetooth device
Playing music from Bluetooth device
Pairing with other Bluetooth devices
Reconnecting to this unit from a Bluetooth device
Connecting a Bluetooth device with the NFC function via NFC
Listening to DIGITAL IN
Listening to ANALOG IN
AirPlay function
Playing songs from your iPhone, iPod touch or iPad
Playing iTunes music with this unit
Selecting multiple speakers (devices)
Spotify Connect function
Playing Spotify music with this unit
Remote play function
Settings required for each device
Web control function
Controlling the unit from a web control
Convenience functions
Adjusting the tone
Sleep timer function
Switching the display’s brightness
30
30
30
31
31
32
33
34
35
36
37
38
40
41
41
41
41
42
43
44
45
46
47
3
Index
48
49
51
52
53
54
54
55
56
56
57
58
58
59
60
62
62
68
69
70
70
Contents
Connections
Playback
Settings
Appendix
Tips
Settings
71
74
75
75
76
77
77
77
78
78
78
79
79
81
82
82
82
83
83
83
84
Menu map
Menu operation
Inputting characters
Using the number buttons
Using the cursor buttons
General
Volume Limit
H/P Amplifier Gain
Audio Out
Language
Auto-Standby
Usage Data
Firmware
Reset
Network
Network Information
Network Control
Friendly Name
Wi-Fi
Bluetooth
Settings
Front panel
Tips
Rear panel
Remote control
unit
Tips
Troubleshooting
91
92
Appendix
Playing back USB memory devices
Playing back Internet Radio
Playing back Bluetooth devices
Bluetooth communications
Playing back files stored on PC or NAS
Last function memory
Explanation of terms
Trademark information
Specifications
Index
License
4
Index
105
107
107
107
108
109
110
115
116
121
123
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Denon product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
.
Check that the following parts are supplied with the product.
Quick Setup Guide
CD-ROM
(Owner’s Manual)
Safety Instructions
Remote control unit
R03/AAA batteries
External antennas for
Bluetooth/wireless
connectivity
Front panel
Rear panel
Remote control
unit
5
Notes on radio
Index
Power cord
Contents
Connections
Playback
Settings
Inserting the batteries
Tips
Appendix
NOTE
0 To prevent damage or leakage of battery fluid:
A Remove the rear lid in the direction of the arrow and remove it.
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Operating range of the remote control
unit
.
Point the remote control unit at the remote sensor when operating it.
B Insert two batteries correctly into the battery compartment as indicated.
R03/AAA batteries
Approx. 7 m
.
30°
Front panel
Rear panel
.
C Put the rear cover back on.
Remote control
unit
6
Index
30°
Contents
Connections
Playback
Settings
Tips
Appendix
Features
High quality sound
Multiple music formats are supported,
all in a compact form factor
0 Equipped with a high-quality class D amplifier
The amplifier section incorporates DDFA® technology from CSR. The
output stage circuit has a discrete construction which realizes higher
S/N and lower distortion compared to conventional class D amplifiers.
Additionally, the high 70 W / 4 Ω/ohms output which exceeds the size of
the housing lets you enjoy Denon’s ideal audio playback environment
that delivers “delicate yet powerful sound”.
The DDFA® mark and the DDFA logo are trademarks of CSR plc or one
of its group companies and may be registered in one or more
jurisdictions. The CSR logo is a trademark of CSR plc or one of its
group companies.
0 Supports Internet Radio and music streaming
Supports AirPlay® (v p. 55)
You can enjoy a wide variety of content, including listening to Internet
Radio, playing audio files stored on your PC.
This unit also supports Apple AirPlay which lets you stream your music
library from an iPhone®, iPad®, iPod touch® or iTunes®.
0 DLNA (Digital Living Network Alliance) ver. 1.5 support for audio
networks
0 Supports Spotify Connect
0 Support for High Quality Audio playback
WAV/FLAC/ALAC (Apple Lossless Audio Codec)/AIFF/DSD
0 Support for Gapless playback
.
Playback with no gap between music files (for WAV/FLAC/ALAC/
AIFF/DSD only).
0 Advanced AL32 Processing
Equipped with Advanced AL32 Processing, Denon’s unique analog
wave reproduction technology. Reproducibility of weak signals is
increased by expanding the 16-bit digital data to 32 bits.
Front panel
Rear panel
Remote control
unit
0 Wi-Fi network capability with diversity antenna, and is certified
under WMM (Wi-Fi Multi Media) for efficient wireless connectivity
7
Index
Contents
Connections
Playback
Settings
Easy operation
0 Easy wireless connection is possible by pressing the Wi-Fi
CONNECT button (WPS and Wi-Fi Sharing)
See the separate “Quick Setup Guide”.
0 Wireless connection with Bluetooth devices can be carried out
easily
You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.
0 If the Bluetooth device has NFC function, you can connect easily
to touch to N mark
0 iPod auto detect charges your device even after the unit switches
to standby mode
0 “Denon Hi-Fi Remote” is application software that allows you to
perform basic operations with an iPad, iPhone, Android
smartphone or Android tablet such as turning the unit ON/OFF,
controlling the volume, and switching the source
z Download the appropriate “Denon Hi-Fi Remote” for your iOS or Android
devices. This unit needs to be connected to your LAN and the iPad, iPhone,
Android smartphone, Android tablet or other device needs to be connected to
the same network by Wi-Fi (wireless LAN).
0 OLED (Organic Light Emitting Diode) display that can display 3
lines
0 Auto Standby mode for energy savings
Front panel
Rear panel
Remote control
unit
8
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Part names and functions
.
Front panel
q
w
e
r
u
i
o
Q0
Front panel
Rear panel
Remote control
unit
t
y
Q1
9
Index
Contents
qw
e
Connections
r
Playback
t
Settings
Tips
Appendix
D Playback/Pause/Enter button (ENTER)
Plays back and pauses tracks, and enters the selected content.
y
E Display
Various information is displayed here.
F Volume control knob
This adjusts the volume level.
.
G USB port (T)
Used to connect iPod or USB memory devices. (v p. 23)
ui
o
Q0
H Headphones jack
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the speaker terminals, SUBWOOFER OUT connector
and AUDIO OUT connectors.
Q1
A Power operation button (X)
Turns power to this unit on and off (standby).
NOTE
B Power indicator
The power indicator changes as shown below according to the status
of the unit.
0 Power on : Off
0 Normal standby : Off
0 When “Network Control” is set to “On” : Red (v p. 82)
0 iPod charge standby : Red (v p. 45)
0 To prevent hearing loss, do not raise the volume level excessively when
using headphones.
I Input source select button (q)
Selects the input source.
J Cursor buttons (uio p)
These select items.
K Remote control sensor
This receives signals from the remote control unit. (v p. 6)
C N mark (Q)
Touch this mark with a Bluetooth device that includes the NFC function
when pairing (registering) with it. (v p. 53)
Front panel
Rear panel
Remote control
unit
10
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Rear panel
q
r
t
y
e
u
.
o
w
Front panel
Rear panel
Remote control
unit
11
Index
y
i
o
Connections
Contents
q
w
Playback
Settings
Tips
Appendix
F Wi-Fi connect buttons (iOS/WPS)
Used to connect to the wireless LAN.
(See the separate “Quick Setup Guide”.)
e
G NETWORK connector
Used to connect this unit to the network. (v p. 25)
.
H ANALOG IN connectors
Used to connect devices equipped with analog audio connectors.
(v p. 19)
o
r
ty u y
i
I Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless
connectivity when connecting to a network via wireless LAN, or when
connecting to a handheld device via Bluetooth. (v p. 26)
o
A Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 17)
1. Place the external antennas for Bluetooth/wireless connectivity
evenly over the screw terminal of rear.
2. Turn clockwise until the antennas is fully connected.
3. Rotate the antenna upwards for best reception.
B SUBWOOFER OUT connector
Used to connect a subwoofer with a built-in amplifier. (v p. 18)
C DIGITAL IN connectors
Used to connect devices equipped with digital audio connectors.
0 “Connecting a digital device (Optical)” (v p. 20)
0 “Connecting a digital device (Coaxial)” (v p. 21)
1
D AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 28)
.
E AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v p. 22)
Front panel
Rear panel
Remote control
unit
12
Index
2
3
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
q
A Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 6)
w
B SLEEP button
This sets the sleep timer. (v p. 70)
C Input source select buttons
These select the input source. (v p. 30)
e
D System buttons
These perform playback related operations.
Channel buttons (CH +, –)
These operate the Favorite function. (v p. 40)
r
t
E TONE button
Adjusting the tone. (v p. 69)
y
F FAVORITES ADD / CALL buttons
0 To add radio stations or files to the favorite list, press the ADD button.
(v p. 41)
0 To call up a radio station or file registered in the favorite list, press the
CALL button. (v p. 41)
Front panel
Rear panel
Remote control
unit
13
Index
Contents
Connections
Playback
Settings
Tips
G TOP MENU button
To back to the top of the menu. (v p. 74)
H Cursor buttons (uio p)
These select items.
I ENTER button
This determines the selection.
J SEARCH button
This displays the search menu.
K Number buttons (0 – 9, +10)
These enter letters or numbers into the unit.
L RANDOM button
Switches the random playback.
M REPEAT button
Switches to the repeat playback.
u
i
o
Q0
Q11
Q2
Q3
Front panel
Rear panel
Remote control
unit
14
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
N POWER button (X)
This turns the power on/standby. (v p. 30)
Q4
O VOLUME buttons (df)
These adjust the volume level. (v p. 31)
P Information button (INFO)
This switches display items such as the artist name and album name in
the playback screen.
Q MUTE button (:)
This mutes the output audio. (v p. 31)
R SETUP button
The setting menu is displayed on the display. (v p. 74)
Q5
S CLEAR button
This cancels the settings.
Q6
Q7
T DIMMER button
Adjust the display brightness of this unit. (v p. 70)
Q8
U MODE button
This switches the operation mode.
Q9
W0
W1
Front panel
Rear panel
Remote control
unit
15
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
o Cables used for connections
Provide necessary cables according to the devices you want to connect.
17
20
Connecting a digital device (Coaxial)
21
Connecting an amplifier
22
Connecting an iPod or USB memory device to the USB port
23
Connecting to a home network (LAN)
25
Connecting the power cord
28
Speaker cable
.
19
Connecting a digital device (Optical)
Subwoofer cable
.
Connecting an analog device
Optical cable
.
Speaker connection
Coaxial digital cable
.
NOTE
0 Do not plug in the power cord until all connections have been completed.
0 Do not bundle power cords with connection cables. Doing so can result in noise.
.
Audio cable
.
LAN cable
Front panel
Rear panel
Remote control
unit
16
Index
L
L
R
R
Contents
Connections
Playback
Settings
Tips
Appendix
Speaker connection
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
Connecting the speaker cables
Connect the speaker cable to the + speaker terminal (red) and the speaker terminal (black).
NOTE
1
Peel off about 10 mm of sheathing from the tip of the
speaker cable, then twist the core wire tightly.
.
0 Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. (“Protection circuit” (v p. 114))
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock.
0 Use speakers with an impedance of 4 – 16 Ω/ohms.
Turn the speaker terminal counterclockwise to loosen
it.
.
2
Insert the speaker cable’s core wire to the hilt into the
speaker terminal.
.
3
Turn the speaker terminal clockwise to tighten it.
.
4
Front panel
Rear panel
Remote control
unit
17
Index
Contents
Connections
Playback
Settings
Connecting the subwoofer
Tips
Connecting speakers
Use a subwoofer cable to connect the subwoofer.
R
.
.
Subwoofer
Front panel
Rear panel
Remote control
unit
18
Index
L
Appendix
Contents
Connections
Playback
Settings
Connecting an analog device
You can connect this unit to various devices with analog audio output.
Analog
device
AUDIO
OUT
R
L
L
R
L
.
R
Front panel
Rear panel
Remote control
unit
19
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a digital device (Optical)
You can connect this unit to devices with digital audio output.
Digital
device
.
OPTICAL
OUT
NOTE
0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this device.
0 Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into this device. Doing so may cause noise, which may cause damage to the
speakers.
Front panel
Rear panel
Remote control
unit
20
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a digital device (Coaxial)
You can connect this unit to devices with digital audio output.
Digital
device
.
COAXIAL
OUT
NOTE
0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this device.
0 Do not input signals other than linear PCM signals, such as Dolby digital, DTS, AAC etc. into this device. Doing so may cause noise, which may cause damage to the
speakers.
Front panel
Rear panel
Remote control
unit
21
Index
Contents
Connections
Playback
Settings
Connecting an amplifier
You can connect this unit to various devices with analog audio input.
Analog
device
AUDIO
IN
L
R
L
R
L
.
R
0 Volume adjustment for the analog audio output can be switched between “Variable” and “Fixed”. (v p. 78)
Front panel
Rear panel
Remote control
unit
22
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an iPod or USB memory device to the USB port
0 To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone.
0 For operating instructions, see “Playing an iPod” (v p. 42) or “Playing files stored on USB memory devices” (v p. 47).
iPod
USB memory
device
.
or
0 Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter,
use that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front panel
Rear panel
Remote control
unit
23
Index
Contents
Connections
Playback
Settings
o Supported iPod/iPhone models
• iPod classic
• iPod nano
• iPod touch
.
• iPhone
Front panel
Rear panel
Remote control
unit
24
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to a home network (LAN)
You can connect this unit to your home network (LAN) to perform various
types of playbacks and operations as follows.
0 Playback of network audio such as Internet Radio and from your music
server(s)
0 Playback of music content from online streaming services
0 Using the Apple AirPlay function
0 Operation on this unit via the network
0 Firmware Update
Wired LAN
PC
NAS
(Network Attached
Storage)
Modem
Internet
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
To WAN side
To LAN port
To LAN port
.
Router
Front panel
Rear panel
Remote control
unit
25
Index
LAN port/
Ethernet
connector
LAN port/
Ethernet
connector
Contents
Connections
Playback
Settings
Wireless LAN
Modem
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0 Use only a shielded STP or ScTP LAN cable which is easily available at
electronics stores. (CAT-5 or greater recommended)
0 The normal shielded-type LAN cable is recommended. If a flat-type cable or
unshielded-type cable is used, other devices could be affected by noise.
0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connect
easily to Wi-Fi by pressing the Wi-Fi CONNECT button (WPS) on this unit. (See
the separate “Quick Setup Guide”.)
To WAN side
.
Router with access point
Rear panel
Remote control
unit
Appendix
0 With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically.
0 When using this unit with the broadband router’s DHCP function enabled, this unit
automatically performs the IP address setting and other settings. When using this
unit connected to a network with no DHCP function, make the settings for the IP
address, etc., at “Network”. (v p. 82)
0 When using this unit, we recommend you use a router equipped with the following
functions:
Internet
Front panel
Tips
26
Index
Contents
Connections
Playback
Settings
NOTE
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if
you have a contract for a type of line set by PPPoE.
0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet
connector on your computer.
0 Do not carry this unit by the antenna.
Front panel
Rear panel
Remote control
unit
27
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
To household power outlet
(AC 230 V, 50/60 Hz)
.
Power cord(supplied)
Front panel
Rear panel
Remote control
unit
28
Index
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Playback network audio/service
Basic operation
Listening to Internet Radio
32
30
Playing back files stored on a PC or NAS
36
Selecting the input source
30
AirPlay function
55
Adjusting the volume
31
Spotify Connect function
58
Turning off the sound temporarily
31
Turning the power on
Other functions
Playback a device
Favorite function
40
59
Playing an iPod
42
Remote play function
Playing a USB memory device
46
Web control function
62
Listening to music on a Bluetooth device
48
Convenience functions
68
Listening to DIGITAL IN
54
Listening to ANALOG IN
54
Front panel
Rear panel
Remote control
unit
29
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
Turning the power on
1
POWER X
Input source
select buttons
Press POWER X to turn on power to the unit.
0 You can also switch the power to standby by pressing X on the main unit.
Selecting the input source
1
VOLUME df
MUTE
Press the input source select button to be played back.
The desired input source can be selected directly.
.
0 Press OPTICAL again to switch between Optical 1/2.
0 You can also select the input source by pressing q on the main unit.
Front panel
Rear panel
Remote control
unit
30
Index
Contents
Connections
Playback
Settings
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The volume level is displayed.
0 You can also adjust the volume by turning the volume control knob on the main
unit.
Turning off the sound temporarily
1
Press MUTE :.
“MUTING” appears on the display.
0 To cancel mute, either adjust the sound volume or press MUTE : again.
Front panel
Rear panel
Remote control
unit
31
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Internet Radio
0 Internet Radio refers to radio broadcasts distributed over the Internet.
Internet Radio stations from around the world can be received.
0 The broad cast station types and specifications supported by this unit
for playback are as follows.
INTERNET
RADIO
0 WMA
0 MP3
0 MPEG-4 AAC
1/3
FAVORITES
ADD/CALL
INFO
.
TOP MENU
uio p
ENTER
SEARCH
Front panel
Rear panel
Remote control
unit
32
Index
Contents
Connections
Playback
Settings
Listening to Internet Radio
This unit memorizes the last played Internet Radio station. If you press
INTERNET RADIO to switch to the Internet Radio function from another
input source, the last Internet Radio station you listened to is played.
1
(v p. 25)
2
3
Displays recommended Internet Radio
stations.
radiodenon.com:
Displays Internet Radio stations added
to favorites in vTuner. For instructions
on how to add to favorites in vTuner,
see “Using vTuner to add Internet Radio
stations to favorites” (v p. 35).
Recently Played :
Displays recently played Internet Radio
stations. Up to 20 stations can be
stored in “Recently Played”.
Search by Keyword :
Displays Internet Radio stations
searched by keyword. For character
input, see “Inputting
characters” (v p. 75).
Press INTERNET RADIO.
Use ui to select the you want to play, then press
ENTER.
Country name :
Displays typical Internet Radio stations.
Search Stations :
Displays all Internet Radio stations that
this unit can tune in to.
Search Podcasts :
Displays Internet Radio stations in the
podcasts that this unit can tune in to.
Front panel
Rear panel
Remote control
unit
4
33
Appendix
Recommended
Stations :
Prepare for playback.
0 Check the network environment, then turn on this unit’s power.
Tips
Use ui to select the station, then press ENTER.
Playback starts once buffering reaches “100%”.
Index
Contents
Connections
Operation buttons
Playback
Settings
Playback / Stop
FAVORITES CALL
Call from the Favorite list
FAVORITES ADD
Add to the Favorite list
SEARCH
Character search
0 If the list is not in alphabetical order, you
may not be able to perform a character
search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/ bit rate and radio
station name etc.
TOP MENU
Returns to the top menu of the Internet
radio function
1
Press INTERNET RADIO.
The source switches to “Internet Radio” and the last played radio
station plays.
0 Any characters that cannot be displayed are replaced with “.” (period).
NOTE
0 The radio station database service may be suspended or be otherwise unavailable
without notice.
Front panel
Rear panel
Remote control
unit
Appendix
Playing the last played Internet Radio
station
Function
1/3
Tips
34
Index
Contents
Connections
Playback
Settings
Using vTuner to add Internet Radio
stations to favorites
5
6
7
Check the MAC address of this unit. “Network
Information” (v p. 82)
Select the radio station of your choice from the list, and
then click the Add to Favorites icon.
Enter the name of the favorite group, then click “Go”.
A new favorite group that includes the selected radio station is
created.
0 Internet Radio stations added to favorites in vTuner can be played
from “radiodenon.com” with this unit (v p. 33).
o Files that can be played back
vTuner.
3
4
Select the search criteria (genre, region, language,
etc.) of your choice.
hear.
0 The MAC address is necessary when you create an account for
2
See “Playing back Internet Radio” (v p. 107).
Use your PC to access the vTuner website
(http://www.radiodenon.com).
Enter the MAC address of this unit, then click “Go”.
Enter your E-mail address and a password of your
choice.
Front panel
Rear panel
Remote control
unit
Appendix
0 You can also enter a keyword to search for a station you want to
There are many Internet Radio stations in the world, and this unit can tune
into these stations. But finding the radio station you want to hear may be
difficult, because there are too many stations. If this is the case, then
please use vTuner, an Internet Radio station search website specifically
designed for this unit. You can use your PC to search Internet Radio
stations and add them as your favorites. This unit can play radio stations
added to vTuner.
1
Tips
35
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back files stored on a PC and NAS
0 This unit can play back music files and playlists (m3u, wpl) stored on a
PC and on Network Attached Storage (NAS) that supports DLNA.
0 The network audio playback function of this unit connects to the server
using technologies shown below.
MUSIC
SERVER
0 Windows Media Player Network Sharing Service
0 This unit can play back the following files.
0 WMA
1/3
89
0 MP3
0 WAV
0 MPEG-4 AAC
0 FLAC
FAVORITES
ADD/CALL
0 ALAC
0 AIFF
TOP MENU
uio p
ENTER
SEARCH
0 DSD
INFO
.
RANDOM
REPEAT
Front panel
Rear panel
Remote control
unit
36
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Applying media sharing settings
Here, we apply the settings to share music files stored on a PC and NAS on the network.
If you are using a Media Server, be sure to apply this setting first.
o When using Windows Media Player 12
(Windows 7 / Windows 8)
1
2
3
Select “More streaming options...” in the “Stream”.
4
Select “Allowed” in the drop-down list for “Media
programs on this PC and remote connections...”.
5
Follow the instructions on the screen to complete the
settings.
o When using Windows Media Player 11
1
2
3
Start up Windows Media Player 12 on the PC.
Select “Allowed” in the drop-down list for “Denon
DRA-100”.
4
5
Start up Windows Media Player 11 on the PC.
Select “Media Sharing” in the “Library”.
Click the “Share my media” check box, select “Denon
DRA-100”, and then click “Allow”.
As you did in step 3, select the icon of the device (other
PCs and mobile devices) you want to use as a media
controller, and then click “Allow”.
Click “OK” to finish.
o Sharing media stored on a NAS device
Change settings on the Network Attached Storage (NAS) device to
allow this unit and other devices (PCs and mobile devices) used as
media controllers to access the NAS. For details, see the owner’s
manual that came with the NAS.
Front panel
Rear panel
Remote control
unit
37
Index
Contents
Connections
Playback
Settings
Playing back files stored on a PC and
NAS
Operation buttons
2
3
4
Appendix
Function
Playback / Pause
1/3
Use this procedure to play music files or playlists.
1
Tips
(Press and hold) Stop
Skip to previous track / Skip to next track
Prepare for playback.
89
A Check the network environment, then turn on this unit’s power.
“Connecting to a home network (LAN)” (v p. 25)
B Prepare the computer (vComputer’s operating instructions).
(Press and hold)
Fast-reverse / Fast-forward
FAVORITES CALL
Call from the Favorite list
FAVORITES ADD
Add to the Favorite list
SEARCH
Character search
0 If the list is not in alphabetical order, you
may not be able to perform a character
search.
RANDOM
Random playback
REPEAT
Repeat playback
0 Switching between Single-track repeat
and All-track repeat.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the file type/bit rate, artist name,
and album title
TOP MENU
Returns to the top menu of the music server
function (server list display)
Press MUSIC SERVER.
Use ui to select the server including the file to be
played, then press ENTER.
Use ui to select the file, then press ENTER.
Playback starts once buffering reaches “100%”.
Front panel
Rear panel
Remote control
unit
38
Index
Contents
Connections
Playback
Settings
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 108).
0 WMA Lossless files can be played when using a server supporting transcoding,
such as Windows Media Player Ver. 11 or later.
NOTE
0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, play back music files with your PC or NAS connected through wired
LAN.
0 The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
Front panel
Rear panel
Remote control
unit
39
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Favorite function
This section provides information on the Favorite function.
0 The Favorite function allows you to register your favorite radio stations
and files in the Favorite List in advance so that you can call and listen to
the stations or files right away, whenever you want.
0 The contents that you can register and call are Internet radio station,
music server, USB and iPod (only when using “On-Display” mode).
0 Up to 50 items can be stored in the Favorite List.
CH +, –
FAVORITES
ADD/CALL
uio
ENTER
0 – 9, +10
.
CLEAR
Front panel
Rear panel
Remote control
unit
40
Index
Contents
Connections
Playback
Settings
2
1
Press FAVORITES ADD while the Internet radio station
or file to register is played back.
Use CH+, CH– or ui.
Deleting stations or files from the
favorite list
Use ui to select a number to register the station or
file, and press ENTER.
“Added To Favorites” is displayed and the registration is competed.
1
2
Calling stations or files from the
favorites list
1
2
3
Press FAVORITES CALL.
Use CH+, CH– or ui to select the station or file that
you want to call, and press ENTER.
The respective function starts up and playback starts.
Press FAVORITES CALL.
Use ui to select the station or file that you want to
delete, and press CLEAR.
When the prompt “Delete?” appears, press ENTER.
“Deleted” is displayed and the deletion is completed.
0 Press o to cancel the operation.
0 Press 0 – 9, +10 to call files registered to the Favorite list by number.
Front panel
Rear panel
Remote control
unit
Appendix
To switch between registered stations
and files during playback
Registering stations or files to the
favorites list
1
Tips
41
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing an iPod
0 You can use the USB cable provided with the iPod to connect the iPod
with the unit’s USB port and enjoy music stored on the iPod.
0 For information on the iPod models that can be played back with this
unit, see “Supported iPod/iPhone models” (v p. 24).
iPod/USB
1/3
89
TOP MENU
uio p
ENTER
INFO
RANDOM
REPEAT
.
MODE
Front panel
Rear panel
Remote control
unit
42
Index
Contents
Connections
Playback
Settings
Listening to music on an iPod
1
2
When you connect iPod to the USB port, the input source
automatically switches to “iPod/USB”.
Press iPod/USB to switch the input source to “iPod/
USB”.
NOTE
0 Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on an iPod when using this unit in conjunction with the iPod.
Operate iPod itself directly while seeing the iPod
screen to play back music.
Front panel
Rear panel
Remote control
unit
Appendix
0 The iPod display modes include “From iPod” and “On-Display”. By default, “From
iPod”, where you directly operate the iPod itself while looking at the iPod screen, is
set.
0 To change to “On-Display” where operations are performed while the iPod
information is displayed on this unit, see “Setting operation mode (“On-Display”
mode)” (v p. 44).
0 You can also listen to iPod music using “AirPlay function” (v p. 55).
Connect the iPod to the USB port. (v p. 23)
“From iPod” is displayed on the display of this unit.
3
Tips
43
Index
Contents
Connections
Playback
Settings
Setting operation mode (“On-Display”
mode)
Operation buttons
Use ui to select the file to be played, then press
ENTER.
Playback starts.
Display mode
From iPod On-Display
P
Video file
z
Active buttons Remote control unit
(This unit)
P
iPod
P
Function
(Press and hold) Stop
Skip to previous track / Skip to next track
Press MODE and display “On-Display”.
Playable files Music file
Appendix
Playback / Pause
1/3
In this mode, various lists and screens during playback on the iPod are
displayed on the body.
This section describes the steps up to playing back tracks on the iPod in
“On-Display”.
1
2
Tips
P
P
z Only the sound is played.
89
(Press and hold)
Fast-reverse / Fast-forward
RANDOM P
Random playback
REPEAT L
Repeat playback
0 Switching between Single-track repeat
and All-track repeat.
MODE
Switching between On-Display or From
iPod mode
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title
TOP MENU
Returns to the top menu of the iPod
function (On-Display mode only)
NOTE
0 Denon will accept no responsibility whatsoever for any loss of iPod data.
0 Depending on the type of iPod and the software version, some functions may not
operate.
Front panel
Rear panel
Remote control
unit
44
Index
Contents
Connections
Playback
Settings
Charging the iPod/iPhone
You can charge your iPod/iPhone by connecting it to USB port.
o Standby charging
If the unit enters power standby mode while the iPod/iPhone is
charging, the unit will switch to standby charging mode, and the iPod/
iPhone will continue to be charged. When in standby charging mode,
the power indicator lights turns red.
When the iPod/iPhone is fully charged, the unit automatically stops
supplying power for charging and enters normal power standby mode,
and the power indicator lights turns off.
0 When the “Network Control” setting is “On”, the power indicator lights red when
charging is complete. (v p. 82)
Front panel
Rear panel
Remote control
unit
45
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music files stored on a USB memory device.
0 Only USB memory devices conforming to mass storage class and MTP
(Media Transfer Protocol) standards can be played on this unit.
0 This unit is compatible with USB memory devices in “FAT16” or
“FAT32” format.
0 This unit can play back the following files.
0 MP3
iPod/USB
1/3
89
0 WMA
0 WAV
0 MPEG-4 AAC
0 FLAC
0 ALAC
0 AIFF
TOP MENU
uio p
ENTER
SEARCH
0 DSD
INFO
.
RANDOM
REPEAT
Front panel
Rear panel
Remote control
unit
46
Index
Contents
Connections
Playback
Settings
Playing files stored on USB memory
devices
1
2
3
Tips
Operation buttons
Appendix
Function
Playback / Pause
1/3
(Press and Hold) Stop
Skip to previous track / Skip to next track
Connect the USB memory device to the USB port.
(v p. 23)
89
When you connect USB memory device to the USB port, the input
source automatically switches to “iPod/USB”.
(Press and hold)
Fast-reverse / Fast-forward
RANDOM
Random playback
Press iPod/USB to switch the input source to “iPod/
USB”.
REPEAT
Repeat playback
0 Switching between Single-track repeat
and All-track repeat.
Use ui to select the file to be played, then press
ENTER.
SEARCH
Character search
0 If the list is not in alphabetical order, you
may not be able to perform a character
search.
uiop
Select the item
ENTER
Enter the selected item
INFO
Switching the artist name and album title
TOP MENU
Returns to the top menu of the USB
function
Playback starts.
NOTE
0 Note that Denon will accept no responsibility whatsoever for any problems arising with
the data on a USB memory device when using this unit in conjunction with the USB
memory device.
o Files that can be played back
See “Playing back USB memory devices” (v p. 105).
Front panel
Rear panel
Remote control
unit
47
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to music on a Bluetooth device
Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.
Communication is possible up to a range of about 10 m.
NOTE
Bluetooth
0 To play back music from a Bluetooth device, the Bluetooth device needs to
support the A2DP profile.
1/3
89
ENTER
.
SEARCH
Front panel
Rear panel
Remote control
unit
48
Index
Contents
Connections
Playback
Settings
Playing music from Bluetooth device
3
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
1
Appendix
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
Connect to the Bluetooth device while “Pairing Mode” is being
displayed on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 1 m).
Press Bluetooth to switch the input source to
“Bluetooth”.
4
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing Mode” will appear on the display of the
unit.
2
Tips
Activate the Bluetooth settings on your mobile device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit. (To select
“pair” on this unit, press ENTER on the unit.)
At the end of the pairing, the device name appears on the display of
this unit.
5
Play music using any app on your Bluetooth device.
0 The Bluetooth device can also be operated with the remote
control of this unit.
0 The next time the input source is switched to Bluetooth, this unit
automatically connects to the last Bluetooth device that was
connected.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Front panel
Rear panel
Remote control
unit
49
Index
Contents
Connections
Operation buttons
1/3
Playback
Settings
Function
Playback / Pause
(Press and Hold) Stop
Skip to previous track / Skip to next track
89
(Press and hold) Fast-reverse / Fastforward
0 Press INFO on the remote control unit during playback to switch the display
between Artist name, Album name, etc.
0 Incompatible characters are displayed as “.” (period).
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
Front panel
Rear panel
Remote control
unit
50
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Pairing with other Bluetooth devices
3
4
Activate the Bluetooth settings on your mobile device.
Press SEARCH when the input source is “Bluetooth”.
The device will go into the pairing mode.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
When a number appears on the display of this unit,
check that it is the same number as that shown on the
screen of the Bluetooth device and then select “pair”
for both the Bluetooth device and the unit. (To select
“pair” on this unit, press ENTER on the unit.)
At the end of the pairing, the device name appears on the display of
this unit.
Front panel
Rear panel
Remote control
unit
Appendix
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
0 Either press and hold Bluetooth for 3 seconds, or switch the input source to
“Bluetooth” and then press and hold INPUT on this unit for more than 3 seconds to
switch to pairing mode.
Pair a Bluetooth device with this unit.
1
2
Tips
51
Index
Contents
Connections
Playback
Settings
Reconnecting to this unit from a
Bluetooth device
After pairing is completed, the Bluetooth device can be connected without
performing any operations on this unit.
This operation also needs to be performed when switching the Bluetooth
device for playback.
1
2
3
4
If a Bluetooth device is currently connected, deactivate
the Bluetooth setting of that device to disconnect it.
Activate the Bluetooth setting of the Bluetooth device
to be connected.
Select this unit from the Bluetooth device list on your
Bluetooth device.
Play music using any app on your Bluetooth device.
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “Network Control” setting of this unit is set to “On” and a Bluetooth
device is connected with the unit in the standby state, the power of the unit will be
turned on automatically.
Front panel
Rear panel
Remote control
unit
52
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Connecting a Bluetooth device with the
NFC function via NFC
3
You can just touch this unit with a Bluetooth device to turn on power to this
unit and perform pairing or establish a connection between this unit and
the Bluetooth device.
2
Play back music on the Bluetooth device.
0 When “Network Control” is set to “On”, startup and connection can be performed
even when the unit power is off.
0 When you touch the N mark (Q) on this unit with the Bluetooth device that is
playing back music, this unit outputs that music.
0 Touch the N mark (Q) again during the Bluetooth connection to disconnect the
connection.
0 Touch the N mark (Q) again if pairing or connection with the Bluetooth device
fails.
Turn on the NFC function on the Bluetooth device.
0 For details, see the owner’s manual for your Bluetooth device.
Touch Q on this unit with the NFC antenna part on the
Bluetooth device.
If a pairing confirmation screen is displayed, follow the instructions
on this unit and the Bluetooth device to complete pairing.
0 Complete operations as instructed by the Bluetooth device.
Front panel
Rear panel
Remote control
unit
Appendix
This unit outputs music from the Bluetooth device.
NOTE
0 Before establishing a NFC connection, cancel the lock function on the Bluetooth
device.
0 When you touch this unit with a Bluetooth device, do so softly.
.
1
Tips
53
Index
Connections
Playback
Settings
1
OPTICAL
Tips
Appendix
Listening to DIGITAL IN
.
Contents
2
ANALOG
COAXIAL
3
Prepare for playback.
Check the connection, then turn on this units.
Press OPTICAL or COAXIAL to select “Optical 1”,
“Optical 2” or “Coaxial”.
Play the component connected to this unit.
0 Only 2-channel linear PCM digital audio signals can be inputted through the
DIGITAL IN connector of this unit.
Listening to ANALOG IN
1
2
3
Front panel
Rear panel
Remote control
unit
54
Prepare for playback.
Check the connection, then turn on this units.
Press ANALOG to select “Analog 1” or “Analog 2”.
Play the component connected to this unit.
Index
Contents
Connections
Playback
Settings
Tips
Appendix
AirPlay function
Music files stored on your iPhone, iPod touch, iPad or iTunes can be
played on this unit via the network.
You can stop AirPlay playback by pressing o or choosing other input source.
To see song and artist names together, press INFO on the remote control unit.
For information about how to use iTunes, also see the Help for iTunes.
The screen may differ depending on the OS and software versions.
.
0
0
0
0
PC
Front panel
Rear panel
Remote control
unit
55
Index
Router
This unit
Contents
Connections
Playback
Settings
Playing songs from your iPhone, iPod
touch or iPad
1
2
Connect your iPhone, iPod touch or iPad Wi-Fi to the
same network as this unit.
0 For details, see your device’s manual.
2
Install iTunes 10, or later, on a Mac or Windows PC that
is connected to the same network as this unit.
Turn this unit ON.
Set “Network Control” to “On” for this unit. (v p. 82)
NOTE
Play the song on your iPhone, iPod touch or iPad.
0 When “Network Control” is set to “On”, the unit consumes more standby
power.
' is displayed on the iPhone, iPod touch or iPad screen.
3
Tap the AirPlay icon '.
Start iTunes and click the AirPlay icon ' to select the
main unit.
.
3
Appendix
Playing iTunes music with this unit
If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can
stream music stored in your “iPhone/iPod touch/iPad” directly to this unit.
1
Tips
4
AirPlay
The music will stream to this unit.
.
AirDrop
Choose a song and click play in iTunes.
4
Select this unit.
Front panel
Rear panel
Remote control
unit
56
Index
Contents
Connections
Playback
Settings
Selecting multiple speakers (devices)
It is possible to play iTunes songs on your home’s AirPlay compatible
speakers (devices) other than those of this unit.
1
2
Click the AirPlay icon ' and select “Multiple”.
Check the speakers you want to use.
NOTE
0 In playback using the AirPlay function, the sound is output at the iPhone, iPod
touch, iPad or iTunes volume setting level.
You should turn down the iPhone, iPod touch, iPad or iTunes volume prior to
playback and then adjust it to a suitable level.
Front panel
Rear panel
Remote control
unit
57
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Spotify Connect function
Spotify is the world’s most popular streaming service. If you subscribe to
Spotify Premium, you can control your new speaker with your phone or
tablet. Because Spotify is built-in to your speaker, you can still take calls or
use other apps - the music never stops.
For information on how to set up and use Spotify Connect please visit
www.spotify.com/connect
Playing Spotify music with this unit
Download the “Spotify App” onto your Android or iOS device beforehand.
To play a Spotify track in this unit, you need to register in the Spotify
premium account first.
.
1
Spotify server
2
3
4
Launch the Spotify App.
Play back the Spotify track.
Tap the F icon to select the unit.
The music will stream to this unit.
Spotify App
This unit
Audio
streaming/
control
Front panel
Connect the Wi-Fi settings of the iOS or Android device
in the same network as this unit.
Rear panel
Control
Remote control
unit
58
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Remote play function
You can use your home network to play back with this unit music files
stored on PC, NAS, smartphones and portable audio players.
In this case, you use PC, smartphones and portable audio players for
operations.
o Roles each device plays
The following devices are used for Remote Play. As specified in the
DLNA standard, these devices are called DMC, DMS or DMR
according to their role.
Name
0 The relevant devices should comply with the DLNA (Digital Living Network
Alliance) Ver. 1.5 standard.
0 A wireless LAN environment is required for playing back music files on
smartphones or portable audio players.
0 For some smartphones, you must install an application for DLNA music playback.
Device example
0 PC
DMC
(Digital Media
Controller)
0 Smartphone
0 Portable audio
player
0 Denon Hi-Fi
Role
Performs Remote Play
operations.
DMC can also play back
music files stored on these
devices.
Remote App
DMS
(Digital Media
Server)
DMR
(Digital Media
Renderer)
0 NAS
0 PC
Stores music files.
Music files stored on these
devices are played back with
DMC.
0 This unit
Outputs audio of music files
played back through Remote
Play from speakers. DMR
cannot perform playback
operations.
(Network Attached
Storage)
o Files that can be played back
See “Playing back files stored on PC or NAS” (v p. 108).
Front panel
Rear panel
Remote control
unit
59
Index
Contents
Connections
Playback
Settings
Configure the settings so that this unit (DMR) can play back music files
stored on your portable audio player. For details on the settings, see
the owner’s manual of your portable player.
You must make settings on DMC and DMS for Remote Play. Make the
following settings. Also see the owner’s manual of each device for
settings.
o Settings on this unit
o Settings on computer and NAS
Connect this unit to the DLNA network. You do not need to make other
settings.
For the network connection, see the provided “Quick Setup Guide”,
“Connecting to a home network (LAN)” (v p. 25) and
“Settings” (v p. 84).
Make settings on computer and NAS to exchange data with DMR
devices.
For details on the settings, see “Applying media sharing
settings” (v p. 37).
o Settings on smartphones
You must install an application for DLNA music playback on your
smartphone to perform operations on DMS and this unit (DMR) with
your smartphone. The applicable application differs according to your
smartphone.
0 Some smartphones support DLNA music playback with the factory settings.
See the owner’s manual of your smartphone.
Rear panel
Remote control
unit
Appendix
o Settings on portable audio players
Settings required for each device
Front panel
Tips
60
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Remote Play operations
Operations are different for each device, but the procedures for
preparing for Remote Play are the same. The preparation procedures
are shown below.
1
Turn on this unit.
2
Display the music file playback screen on DMC.
0 Press o to exit Remote Play mode.
NOTE
0 During Remote Play, you cannot perform playback operations with this unit. Use
the DMC device for these operations.
0 Make sure that this unit is connected to the network.
0 For PC, open Windows Media Player 12, etc.
0 For smartphones, switch to the music file playback mode.
3
Select the friendly name of this unit for the item that
sets the playback device on the playback screen.
0 The default Friendly Name of this unit is “Denon DRA-100”.
4
Start playing back a music file on DMC.
0 The function on this unit automatically switches to “Music Server”
and the Remote Play mark m appears on the display. Remote
Play starts.
Front panel
Rear panel
Remote control
unit
61
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Web control function
You can control this unit from a web control screen on a web browser.
PC
Router
Controlling the unit from a web control
This unit
1
2
Switch the “Network Control” setting to “On”.
(v p. 82)
Check the IP address of this unit with “Network
Information”. (v p. 82)
[Network Information ]
IP Address
192.168.0.2
.
Checking the IP address.
3
.
Tablet
Start up the web browser.
0 This unit and the PC or tablet need to be connected to the network properly in
order to use the web control function. “Connecting to a home network
(LAN)” (v p. 25)
0 Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Front panel
Rear panel
Remote control
unit
62
Index
Contents
4
Connections
Playback
Settings
5
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.0.2”, enter
“http://192.168.0.2”.
w
http://192.168.0.2
Bonjour
apple
NETWORK
Yahoo! Japan
q
Appendix
When the top menu is displayed, click on the menu
item you want to operate.
NETWORK
FIRMWARE
YouTube Wikipedia news(45)
Tips
e
r
Please select the menu.
Please select the menu.
.
FIRMWARE
.
C Click when you setup network settings. (vGExample 1H)
D Click when you update firmware.
A Entering the IP address.
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
0 By adding this unit’s IP address to the browser’s bookmark, you can display
the web control screen using the bookmark function the next time you use
the browser. If you are using a DHCP server and “Network Control” is set to
“Off”, turning the power on/off changes the IP address (v p. 82).
Front panel
Rear panel
Remote control
unit
63
Index
Contents
6
Connections
Playback
Settings
Operate.
FIRMWARE
NETWORK
Set
Test Connection
y
Set Default
u
0 Only characters that can be displayed on this unit can be set.
(v p. 75)
o
n Network connection settings
i
G Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen. (vGExample 2H)
H Click to change DHCP/proxy settings. (vGExample 2H)
I Click to connect using the newly applied settings.
.
[+]DHCP or Proxy
E To change the Friendly Name, enter the new name in the text
box and click “Set”.
F To reset the Friendly Name, click “Set Default”.
t
Friendly Name
Network Connection
Select Connection
Wired
Front panel
Appendix
n Friendly Name setting
GExample 1H Network Setting 1
NETWORK
Tips
Rear panel
Remote control
unit
64
Index
Contents
7
Connections
Playback
Settings
Operate.
FIRMWARE
Appendix
n Network connection settings
GExample 2H Network Setting 2
NETWORK
Tips
J GExample 2H - Displayed when “Wi-Fi” is selected in G.
Select or input items as necessary, and then click “Test
Connection” to apply the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to
be updated.
K GExample 2H - Displayed when “DHCP” or “Proxy” is selected
in H. When changing DHCP/proxy settings, input or select
for each item.
NETWORK
Friendly Name
Set
Network Connection
Select Connection
Wi-Fi Setup
Manual
S SID
Security
Security Key
Defaullt Key
Set Default
Wi-Fi
Manual
--None
Q0
Key1
Test Connection
[-]DHCP or Proxy
DHCP
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Proxy
Address Or Name
Address
Port
ON
OFF
192.168.000.001
255.255.255.000
000.000.000.000
000.000.000.000
000.000.000.000
0 To apply network connection settings, click “Test Connection” after
making changes.
Q1
ON
OFF
Address
Name
000.000.000.000
00000
.
Save DHCP Proxy Settings
Front panel
Rear panel
Remote control
unit
65
Index
Contents
Connections
Playback
Settings
o Update on web screen
2
“Web control function” (v p. 62) settings must be completed in
advance on a computer belonging to the same network. For
information on obtaining update files, please contact our customer
service center.
Appendix
When the following screen is displayed by the PC, click
the “Choose File” (A) button, select the update file,
and click the “Upload” (B) button.
Firmware
Click D from step 5 for the “Web control function”.
(v p. 62)
Choose File
Upload new firmware
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
q
Upload
w
.
G The web display H
FIRMWARE
3
Please wait...
Click “OK”.
Updating will begin.
Firmware
Warning:
Once started,the upload process cannot be interrupted or adorted,
in order to ensure the integrity of the Digital Media Player.
Are you sure you want to proceed?
.
OK
e
.
G The unit’s screen display H
NOTE
0 Do not operate the unit while updating is in progress.
.
1
Tips
Front panel
Rear panel
Remote control
unit
66
Index
Contents
4
Connections
Playback
Settings
When the following screen is displayed, updating is
complete.
Firmware
New Firmware:
xxx.fw
Firmware upload status: 100% completed.
.
The upload process finished successfully.
Please close this.
0 Button names may vary depending on the OS language used on your computer.
Front panel
Rear panel
Remote control
unit
67
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
SLEEP
Adjusting the tone
69
Sleep timer function
70
Switching the display’s brightness
70
TONE
uio p
.
DIMMER
Front panel
Rear panel
Remote control
unit
68
Index
Contents
Connections
Playback
Settings
n Treble
Adjusting the tone
1
2
Adjusts the treble sound.
Press TONE to select the tone parameter to be
adjusted.
–8dB – +8dB (Default : 0dB)
n Balance
Use ui to adjust the “Source Direct”, “Bass”, “Treble”
or “Balance”.
Use op to adjust the left/right volume balance.
n Source Direct
The “Bass”, “Treble” and “Balance” are not adjusted.
On / Off (Default: Off)
n Bass
Adjusts the bass sound.
–8dB – +8dB (Default : 0dB)
Front panel
Rear panel
Tips
Remote control
unit
69
Index
Appendix
Contents
Connections
Playback
Settings
Sleep timer function
1
Press SLEEP during playback and select the setting
time.
Press DIMMER.
0 The brightness of the display switches each time the button is
pressed (3 levels).
0 The o indicator on the display lights.
0 You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
o To cancel the sleep timer
Press SLEEP to set “Sleep 1Off”.
The o indicator on the display turns off.
0 The sleep timer setting is canceled when the unit switches to standby mode.
0 To check the time remaining until the sleep timer is activated, press SLEEP.
Front panel
Rear panel
Appendix
Switching the display’s brightness
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Tips
Remote control
unit
70
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
o Quick Setup
Setting items
Quick Setup
Front panel
Description
Performs the network settings using a Wizard style window.
For details on the operations, see the separate “Quick Setup Guide”.
Rear panel
Remote control
unit
71
Index
Page
–
Contents
Connections
Playback
Settings
Tips
Appendix
o General
Setting items
Description
Page
Volume Limit
Make a setting for maximum volume.
77
H/P Amplifier Gain
Set the gain of the headphone amplifier.
77
Audio Out
You can set whether to “Fixed” or “Variable” the analog audio output level.
78
Language
Sets the language for display the menu.
78
Auto-Standby
Sets the unit power to standby when the unit is not in use.
78
Usage Data
Selects whether or not to send anonymous usage data to Denon.
79
Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
79
Update
Update the firmware of this unit.
79
Notifications
Set the Update, Upgrade and Alerts notification on/off.
80
Add New Feature
Display new features that can be downloaded to this unit and perform an upgrade.
80
Resetting factory settings.
81
Reset
Front panel
Rear panel
Remote control
unit
72
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Network
Setting items
Description
Page
Network Information
Displays various information about the network.
82
Network Control
Performs the ON/OFF settings for the network function when in standby mode.
82
Friendly Name
Edits a name displayed on the Internet.
83
Wi-Fi
Enables/disables the Wi-Fi function.
83
Bluetooth
Enables/disables the Bluetooth function.
83
Settings
Performs the settings for a wired or wireless LAN.
84
Performs the settings for a wired LAN.
84
Performs the DHCP setting.
84
IP Address z
Performs the IP address setting.
84
Subnet Mask z
Performs the subnet mask setting.
84
Gateway
Wired Setup
DHCP (On) or DHCP
(Off)
Performs the gateway setting.
84
Primary DNS z
Performs the primary DNS setting.
84
Secondary DNS z
Performs the Secondary DNS setting.
84
Proxy
Performs the proxy setting.
85
Test Connection
Performs the wired LAN connection.
z
Wi-Fi Setup Method
–
Performs the wireless LAN connection setting.
85
Auto-Scan
Selects and sets the wireless connections from the access point list.
86
Share Wi-Fi setting
from an iOS device
Sets the wireless connection using an iOS device. (iOS version 7 or later)
86
WPS (Wi-Fi Protected Sets the wireless connection using WPS (Wi-Fi Protected Setup).
Setup)
86
Web Browser Setup
Sets the wireless connection using web browser.
87
Manual
Sets the wireless connection manually.
89
z Displayed when the “DHCP” setting is “Off”. (v p. 84)
Front panel
Rear panel
Remote control
unit
73
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Menu operation
1
2
3
4
Press SETUP.
The menu is displayed.
Use uiop to select the menu to be set or operated,
then press ENTER.
Use ui to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press o.
0 Exiting the Menu, press SETUP while the menu is displayed.
TOP MENU
uio p
ENTER
The menu display disappears.
0 To back to the top of the menu, during menu operation, press
TOP MENU.
.
SETUP
Front panel
Rear panel
Remote control
unit
74
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Inputting characters
On this unit, you can change the name displayed on the following screens to the names that you prefer.
0 Friendly Name (v p. 83)
0 Character input for the network functions (v p. 33)
Using the number buttons
1
3
Display the screen for inputting characters.
0 To change a character, use op to align the cursor with the
0 The types of characters that can be input are as shown below.
character that you want to change.
Press +10 to select the character type (upper case,
lower case, or numeric characters).
[email protected]_/:
mnoMNO6
abcABC2
pqrsPQRS7
defDEF3
tuvTUV8
ghiGHI4
wxyzWXYZ9
jklJKL5
0 ( Space ) ! “ # $
%&‘()z+,;<=
>?[\]^`{|}
.
2
Press 0 – 9, +10 until the desired character is
displayed.
4
Front panel
Rear panel
Remote control
unit
75
Repeat steps 2 and 3 to change the name then press
ENTER to register it.
Index
Contents
Connections
Playback
Settings
Using the cursor buttons
1
Display the screen for inputting characters.
0 To change a character, use op to align the cursor with the
character that you want to change.
2
Use ui to change the character.
0 The types of characters that can be input are as shown below.
GLower caseH
abcdefghijklmnopqrstuvwxyz
GUpper caseH
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!“#$%&‘()z+,-./:;<=>[email protected]
[\]^_`{|}~
GNumbersH 0123456789 (Space)
.
GSymbolsH
3
Repeat step 2 to change the name then press ENTER to
register it.
0 Press CLEAR to delete the character.
0 Press 9 to insert a space.
Front panel
Rear panel
Remote control
unit
76
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
Volume Limit
H/P Amplifier Gain
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the “Low” side if the headphones have low impedance and on the
“High” side if they have high impedance.
o Make a setting for maximum volume
Limits the volume to ensure safe use of this product, and also makes it
easier to adjust the volume from AirPlay or an app to an ideal range.
-30dB / -15dB / 0dB(Full throttle) / Other (Default : -30dB)
When “Other” is selected, the volume upper limit can be set within the
range of -60dB - 0dB. Select the value using ui and then press ENTER
to enter the setting value.
0 When the maximum volume is set, if you increase the volume to the setting value
and press VOLUME d again, “Allow max volume?” is displayed. If you press
ENTER the maximum volume limit is canceled.
Front panel
Rear panel
Remote control
unit
Low
(Default):
Set the gain of the headphone amplifier to
“Low”.
Mid:
Set the gain of the headphone amplifier to
“Mid”.
High:
Set the gain of the headphone amplifier to
“High”.
NOTE
0 The headphone volume varies depending on the “H/P Amplifier Gain” setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
77
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Language
Audio Out
You can set whether to “Fixed” or “Variable” the analog audio output level.
Set the language for display on the menu.
Fixed
Fixes the analog audio output level.
Variable
(Default):
You can adjust the analog audio output
level using the VOLUME df buttons on the
remote control.
The analog audio output volume is linked to
the Speaker volume.
English / Deutsch / Français / Italiano / Nederlands / Español /
Svenska / Русский / Polski (Default :English)
Auto-Standby
When “Auto-Standby” is set to “On”, and no operations are made in the
stopped state for the set amount of time, this unit automatically enters
standby mode.
For the input source “Tuner” and “From iPod” only, when no operation is
performed for eight hours, this unit automatically enters the standby mode.
NOTE
0 Note that the analog audio output level changes to the maximum when the analog
audio output setting is changed from “Variable” to “Fixed”.
0 Before changing the settings, turn the volume of the amp connected to the AUDIO
OUT connectors to the minimum volume.
Front panel
Rear panel
Remote control
unit
78
1min / 5min /
15min / Other
(Default : 15min):
When “Other” is selected, the “AutoStandby” time can be set within the range
of 1 - 99 minutes. Select the value using
ui and then press ENTER to enter the
setting value.
Off:
The unit does not go into standby
automatically.
Index
Contents
Connections
Playback
Settings
Usage Data
Tips
Appendix
Firmware
For product improvement purposes, please send information on the
device settings and operating conditions of the functions to Denon.
Information provided by customers will be used as reference material for
product development purposes in the future.
Denon will never provide any information we collect to third parties.
Yes:
Provide information on the operating status
of this unit.
No:
Do not provide information on the operating
status of this unit.
Set whether or not to check for firmware update, update the firmware, and
display update, upgrade and alert notifications.
o Update
Update the firmware of this unit.
Check For Update:
Check for firmware updates.
Update Start:
Execute the update process.
0 Even if the update fails, this unit will automatically try to update again.
Front panel
Rear panel
Remote control
unit
79
Index
Contents
Connections
Playback
Settings
o Notifications
Tips
Appendix
o Add New Feature
Notification messages are displayed in the screen when the power is
switched on when new firmware can be used, or when there are other
notification messages.
Display new features that can be downloaded to this unit and perform
an upgrade.
Update
On
(Default):
Display update message.
Off:
Do not display update message.
Upgrade
On
(Default):
Display upgrade message.
Off:
Do not display upgrade message.
Upgrade package:
Display the items to be upgraded.
Upgrade Status:
Display a list of the additional functions
provided by the upgrade.
Upgrade Start:
Execute the upgrade process. When the
upgrade starts, the menu screen is shut
down. During the upgrade, the amount of
upgrade time which has elapsed is
displayed.
Upgrade ID:
The ID number shown on the display is
needed when carrying out the procedure.
Notification Alerts
On
(Default):
Displays notification messages from
Denon in the popup menu.
Off:
Does not display notification messages
from Denon in the popup menu.
Front panel
Rear panel
Remote control
unit
0 See the Denon website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “Not
Registered” is displayed.
80
Index
Contents
Connections
Playback
Settings
0 In order to add new functions, the environment and settings required
Perform this procedure if the display is abnormal or if operations cannot be
performed. Various settings are reset to the factory default values. Make
settings again.
for connecting to broadband internet are needed. (v p. 25)
0 Perform the add new feature operation after at least 2 minutes has
elapsed since turning this unit’s power on.
0 Do not turn off the power until updating or upgrading is completed.
0 Even with a broadband connection to the Internet, approximately 20
minutes is required for the updating/upgrading procedure to be
completed.
Cancel:
Values are not reset.
Reset factory defaults:
Values are reset.
0 Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
updating/upgrading the firmware may reset the backup data for the
parameters, etc. set for this unit.
0 When the update or upgrade failed with a message such as “Update
failed” and “Download failed”, remove and re-insert the power cord.
“Update Retry” appears on the display and update restarts from the
point at which update failed. If the error continues despite this, check
the network environment.
0 Information regarding the “Update” function and “Add New Feature” will be
announced on the Denon web site each time related plans are defined.
Rear panel
Remote control
unit
Appendix
Reset
Notes concerning use of “Update” and “Add New Feature”
Front panel
Tips
81
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to
On (use the default setting). This allows this unit to use your home network.
If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your
home network such as the gateway address and subnet mask.
Network Information
Network Control
Display network information.
Enables network communication in standby power mode.
Friendly Name / DHCP On or Off / IP Address / MAC Address /
SSIDz
On:
The network function can be used when in
standby power mode. Main unit operable
with a network compatible controller.
Off
(Default):
The network function cannot be used in
standby power mode.
z This is displayed only while a Wi-Fi connection is enabled.
0 When using the Web control function or a network controller or when you want to
use Bluetooth/NFC quickly when the power is off, set “Network Control” to “On”.
NOTE
0 When “Network Control” is set to “On”, the unit consumes more standby power.
Front panel
Rear panel
Remote control
unit
82
Index
Contents
Connections
Playback
Settings
Friendly Name
Tips
Appendix
Wi-Fi
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
You can stop the Wi-Fi function when connecting this unit to the network
using Wired LAN.
o Select Name
Enabled
(Default):
The Wi-Fi function is used.
Disabled:
The Wi-Fi function is stopped.
Selects Friendly Name from the list.
Current Friendly Name / AV Room / Bedroom / Dining Room /
Family Room / Guest Room / Kids Room / Kitchen / Living
Room / Office / Denon DRA-100 / Other (Default :Denon DRA-100)
Bluetooth
0 When you select “Other”, you can change the Friendly Name
You can stop the Bluetooth function.
according to your preferences.
0 Up to 63 characters can be input.
0 For character input, see (v p. 75).
Front panel
Rear panel
Remote control
unit
83
Enabled
(Default):
The Bluetooth function is used.
Disabled:
The Bluetooth function is stopped.
Index
Contents
Connections
Playback
Settings
Set the IP address within the ranges shown below.
0 The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
You can make detailed settings for the network.
To change the network environment, perform “Quick Setup”. (For details
on the operations, see the separate “Quick Setup Guide”.)
0 If you are using a broadband router (DHCP function), there is no need to
make the settings at “IP Address” and “Proxy”, since the DHCP function
is set to “On” in this unit’s default settings.
0 Only set “Settings” when connecting to a network without a DHCP
function.
n Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
o Wired Setup
n DHCP
n Gateway
Selects how to connect to the network.
On
Configure the network settings
(Default):
automatically from your router.
Front panel
Appendix
n IP Address
Settings
Off:
Tips
When connected to a gateway (router), input its IP address.
n Primary DNS, Secondary DNS
Configure the network settings manually.
Rear panel
Remote control
unit
If there is only one DNS address indicated in the documentation
supplied by your provider, enter it for “Primary DNS”. If two or more
DNS are provided by your provider, enter one for “Secondary DNS”.
84
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Wi-Fi Setup Method
n Proxy
Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a
proxy server that is on your internal network or provided by your
provider, etc.
Proxy (Off) or Proxy
Set the proxy server.
(On):
In this menu, Wi-Fi settings and connections can be made using any of
the five connection methods.
Auto-Scan / Share Wi-Fi setting from an iOS device / WPS (Wi-Fi
Protected Setup) / Web Browser Setup / Manual
Proxy (Address) or Proxy Select when inputting by address or
(Name):
domain name.
0 If a LAN cable is connected, remove it.
0 See the “Quick Setup Guide” for details on how to connect to Wi-Fi using the
Wi-Fi connect button on the rear panel.
Address or Name:
Inputting address or domain name. Up to
38 characters can be input.
Port:
Enter port number.
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 25)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
Front panel
Rear panel
Remote control
unit
85
Index
Contents
Connections
Playback
Settings
n Auto-Scan
You can use an iOS device such as an iPhone or iPad to configure WiFi settings.
After selecting this item, select Settings/Wi-Fi from the iOS device
home screen, select “Denon DRA-100” displayed at the bottom of the
screen, and then follow the setting instructions displayed on the iOS
device.
For details, see the “Quick Setup Guide”.
From the list of the networks, select the one you want
to connect to.
0 Select “Rescan” if the network cannot be found.
2
Make the following settings.
Default Key:
Select the default key.
0 When connecting to a WEP
encrypted network, “Default Key”
menu is displayed.
Password:
Input the password.
n WPS (Wi-Fi Protected Setup)
DHCP/Proxy:
Performs the DHCP and proxy setting.
(“DHCP” (v p. 84),
“Proxy” (v p. 85))
1
Test Connection:
Test the connection.
Front panel
Appendix
n Share Wi-Fi setting from an iOS device
This automatically searches for networks.
1
Tips
Rear panel
Remote control
unit
0 The iOS version must be 7 or later.
86
Register the PIN code of the unit in the router.
Index
Contents
Connections
Playback
Settings
n Web Browser Setup
3
Use a web browser to set up Wi-Fi.
A Wi-Fi device that can perform web browse operations is required.
Appendix
Enter the IP address of this unit in browser’s address
box.
Read the precautions on the screen, and press ENTER.
w
http://192.168.1.16
Bonjour
apple
Yahoo! Japan
q
YouTube Wikipedia news(45)
Please select the menu.
NETWORK
Select “Denon DRA-100” from the Wi-Fi network list of
the Wi-Fi device.
.
The IP address (192.168.1.16) appears on the unit.
A Entering the IP address (192.168.1.16).
B If you are using the Safari web browser, you can select “Bonjour”
and directly access the unit’s web control screen from the
overview section.
4
When the top menu is displayed, click “NETWORK”.
NETWORK
e
Please select the menu.
.
1
2
Tips
C Click “NETWORK”. (vGExample 1H)
Front panel
Rear panel
Remote control
unit
87
Index
Contents
Playback
Settings
Operate.
NETWORK
NETWORK
NETWORK
Friendly Name
Friendly Name
Network Connection
Select Connection
Select Connection
Conn
Appendix
GExample 2H Network Setting 2
GExample 1H Network Setting 1
NETWORK
Tips
Network Connection
Select Connection
Manual
SSID
Security
Security Key
Defaullt Key
r
Test Connecti
Connection
Wi-Fi
--None
t
Key1
Test Connection
.
.
5
Connections
n Network connection settings
n Network connection settings
E GExample 2H - Displayed when “Wi-Fi” is selected in D. Select or
input items as necessary, and then click “Test Connection” to apply
the changes.
0 Items displayed may vary depending on selected items and
connection status.
0 After selecting each item, wait a moment for the display to be
updated.
D Click to change the network connection method. If you select
“Wi-Fi”, a new item will appear on-screen.
(vGExample 2H)
0 To apply network connection settings, click “Test Connection” after making
changes.
Front panel
Rear panel
Remote control
unit
88
Index
Contents
Connections
Playback
Settings
n Manual
Sets the wireless connection manually
Input the name of the wireless network
SSID :
(SSID).
Security:
Select the encryption method according
to the encryption setting of the access
point you are using.
Default Key:
Select the Default Key.
0 When connecting to a “WEP”
encrypted network, “Default Key”
menu is displayed.
Password:
Input the password.
DHCP/Proxy:
Performs the DHCP and proxy setting.
(“DHCP” (v p. 84), “Proxy” (v p. 85))
Test Connection:
Test the connection.
Front panel
Rear panel
Remote control
unit
89
Index
Tips
Appendix
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
Troubleshooting
Tips
Power does not turn on / Power is turned off
92
91
LED is flashing
92
Simple operations for iPod/USB
91
Operations cannot be performed through the remote control unit
93
I only want to recharge my iPod
91
No sound comes out
94
Changing or resetting the network environment
91
Desired sound does not come out
95
Sound is interrupted or noise occurs
96
Simple operations in the power off state
Volume adjustment is difficult when using AirPlay or app operation,
and the sound suddenly becomes too loud
Front panel
Rear panel
Remote control
unit
91
90
iPod cannot be played back
97
USB memory devices cannot be played back
98
Bluetooth cannot be played back
99
File names on the iPod/USB memory device are not displayed
properly
100
The Internet radio cannot be played back
101
Music files on PC or NAS cannot be played back
102
Audio from digital devices cannot be played back (Coaxial/Optical)
103
Cannot connect by Wi-Fi
104
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
Simple operations in the power off state
0 When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, “Denon Hi-Fi Remote”. (v p. 82)
Simple operations for iPod/USB
0 When connected to the USB port, the Input Source automatically changes and playback begins. (“Listening to music on an iPod” (v p. 43), “Playing
files stored on USB memory devices” (v p. 47))
I only want to recharge my iPod
0 Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 45)
Changing or resetting the network environment
0 Prepare the provided “Quick Setup Guide”, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings. (v p. 84)
Volume adjustment is difficult when using AirPlay or app operation, and the sound suddenly becomes too loud
0 Reducing the “Volume Limit” setting value (to around -50dB to -30dB) limits the volume setting from AirPlay or an app to an ideal range and makes it
easier to adjust the volume. (v p. 77)
Front panel
Rear panel
Remote control
unit
91
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
70
0 “Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To
78
Cause / Solution
Page
disable “Auto-Standby”, set “Auto-Standby” on the menu to “Off”.
28
o LED is flashing
Symptom
Power turns off and the
protection circuit indicator
flashes in red approx.
every 2 seconds.
Power turns off and the
protection circuit indicator
flashes in red approx.
every 0.5 seconds.
Front panel
0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
－
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
0 Please re-install this unit in a place having good ventilation.
－
0 Check the speaker connections. The protection circuit may have been activated because speaker cable
17
0 This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.
－
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, firmly re-twist the core
wire, and then reconnect the wire.
0 Turn down the volume and turn on the power again.
Rear panel
Remote control
unit
92
Index
－
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
0 Batteries are worn out. Replace with new batteries.
6
0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
6
0 Remove any obstacle between this unit and the remote control unit.
－
0 Insert the batteries in the proper direction, checking the q and w marks.
6
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
－
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
－
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
Front panel
Page
Rear panel
Remote control
unit
93
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound comes out of
speakers.
Cause / Solution
0 Check the connections for all devices.
17
0 Insert connection cables all the way in.
－
0 Check that input connectors and output connectors are not reversely connected.
－
0 Check cables for damage.
－
0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the
17
0 Check that a proper input source is selected.
30
0 Adjust the volume.
31
0 Cancel the mute mode.
31
0 Check that the correct input source is selected when audio is being input to this unit from an external
54
0 Check the digital audio output setting on the connected device. The initial settings may be off depending
54
0 Only 2-channel linear PCM can be input as the digital audio signal to the DIGITAL IN connector of this
54
metal part on speaker terminals. Also, securely tighten speaker terminals. Check speaker terminals for
looseness.
device.
on the device.
unit.
0 No sound is output from the speakers when headphones are connected.
Front panel
Page
Rear panel
Remote control
unit
94
Index
9
Contents
Connections
Playback
Settings
Tips
Appendix
o Desired sound does not come out
Symptom
Cause / Solution
Page
Left/right volume balance is 0 Press the TONE button on the remote control to adjust the balance.
unbalanced.
69
No sound from the sub
woofer.
18
0 Check the subwoofer connections.
0 Switch the subwoofer power on.
－
Set values are not reflected 0 “Bass” and “Treble” setting values are not reflected in Audio and Subwoofer out.
in “Bass” and “Treble”.
69
Headphone volume is low.
77
Front panel
0 Switch “H/P Amplifier Gain” to “Mid” or “High” if using headphones with high impedance or low sensitivity.
Rear panel
Remote control
unit
95
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
When making a call on
iPhone, noise occurs in
audio output on this unit.
Cause / Solution
－
0 The network communication speed is slow or the radio station is busy.
－
0 When making a call, keep a distance of 20 cm or longer between iPhone and this unit.
－
Sound cuts out when using 0 If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
Wi-Fi connection.
connection.
0 Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
Front panel
Page
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
Rear panel
Remote control
unit
96
Index
25
84
Contents
Connections
Playback
Settings
Tips
Appendix
o iPod cannot be played back
Symptom
Cause / Solution
iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported.
－
0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
25
0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
－
0 The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /
－
0 The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
55
0 Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
－
0 Some external factors may be affecting the wireless connection. Modify the network environment by
－
the same LAN as this unit.
the latest version.
No sound is produced.
iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
iTunes / iPhone / iPod touch / iPad screen and select this unit.
Audio is interrupted during
the AirPlay playback on
iPhone / iPod touch / iPad.
AirPlay.
taking measures such as shortening the distance from the wireless LAN access point.
Front panel
24
0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
recognized. Use a genuine USB cable.
The AirPlay icon ' is not
displayed on iTunes /
iPhone / iPod touch / iPad.
Page
Rear panel
Remote control
unit
97
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No Connection” is
displayed.
Cause / Solution
0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device.
0 USB memory devices of a mass storage class or those compatible with MTP are supported.
－
－
0 The USB memory device must be formatted to FAT16 or FAT32.
－
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
－
0 Files of a type not supported by this unit are not displayed.
46
0 This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modify
－
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
the folder structure of the USB memory device.
Files on a USB memory
device cannot be played.
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
－
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
46
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
－
played on this unit.
Front panel
23
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
Files on the USB memory
device are not displayed.
Page
Rear panel
Remote control
unit
98
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
be connected to this unit.
NFC connection fails
The sound is cut off.
Cause / Solution
－
0 Bring the Bluetooth device near to this unit.
－
Bluetooth device to enable the Bluetooth function.
0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
－
0 Turn the power of the Bluetooth device off and on again, and then try again.
－
0 Set “Network Control” to “On” and connect again.
82
0 Check the NFC settings on each Bluetooth device.
－
0 Cancel the Lock function on each Bluetooth device.
－
0 Check the NFC position on each Bluetooth device, and then move the NFC close to Q on this unit.
53
0 Set “Network Control” to “On” and connect again.
82
0 Bring the Bluetooth device near to this unit.
－
0 Remove obstructions between the Bluetooth device and this unit.
－
0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
－
0 Reconnect the Bluetooth device.
－
devices and other Bluetooth devices.
Front panel
Page
0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
Rear panel
Remote control
unit
99
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“…”,
etc.).
Front panel
Cause / Solution
0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
Rear panel
Remote control
unit
100
Index
Page
－
Contents
Connections
Playback
Settings
Tips
Appendix
o The Internet radio cannot be played back
Symptom
Cause / Solution
Page
The radio station list is not
displayed.
0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
25
Internet Radio cannot be
played.
0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
107
be played back in this unit are MP3, WMA and AAC.
0 The firewall function is enabled on the router. Check the firewall setting.
－
0 The IP address is not properly set.
84
0 Check the power of the router is on.
－
0 To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
84
0 To obtain the IP address manually, set the IP address and proxy on this unit.
84
0 Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
33
Cannot connect to favorite
radio stations.
0 Radio station is not currently in service. Register radio stations in service.
－
For some radio stations,
“Connection Down” is
displayed and station
cannot be connected to.
0 The selected radio station is not in service. Select a radio station in service.
－
“DHCP” setting to “On” on this unit.
while and select the same radio station, or select another radio station.
Front panel
Rear panel
Remote control
unit
101
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
cannot be played.
Cause / Solution
0 Files are stored in a non-compatible format. Record in a compatible format.
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
Music files on PC cannot
be played back.
－
37
0 The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
－
0 Computer’s power is not turned on. Turn on the power.
－
0 Server is not running. Launch the server.
－
0 Set’s IP address is wrong. Check the set’s IP address.
82
0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
25
to this unit through the network.
108
0 If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
－
0 If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
37
0 If connection is restricted, set audio equipment as the connection target.
－
setting.
Media Player’s media sharing function and add NAS to the selected play folder.
Front panel
－
0 The set’s USB port cannot be used for connection to a computer.
Files on PC or NAS are not 0 Files of a type not supported by this unit are not displayed.
displayed.
Music stored on a NAS
cannot be played.
108
0 Media sharing settings are not correct. Change media sharing settings so that the unit can access the
folders on your computer.
Server is not found, or it is
not possible to connect to
the server.
Page
Rear panel
Remote control
unit
102
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Audio from digital devices cannot be played back (Coaxial/Optical)
Symptom
Cause / Solution
Page
“Signal Unlock” is
displayed.
0 When digital audio signals cannot be detected properly, “Signal Unlock” is displayed.
－
“Unsupported” is
displayed.
0 “Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the
－
Front panel
audio output signal format from your digital device.
Rear panel
Remote control
unit
103
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot connect by Wi-Fi
Symptom
Cannot connect to the
network.
Cause / Solution
88
0 Reduce the distance between the wireless LAN access point and this unit, remove any obstructions and
－
0 Check the router power supply.
－
according to the setting details of this unit.
make sure the view to the access point is unobstructed before trying to connect again. Also, install
microwave ovens and other network access points as far away as possible.
Cannot connect to WPS.
0 This unit supports IEEE802.11.b/g/n.
－
0 Configure the access point channel settings away from channels that are being used by other networks.
－
0 This unit is not compatible with WEP (TSN).
－
0 Check that the WPS mode of the router is operating.
－
0 Press and hold the Wi-Fi CONNECT button (WPS) on this unit for approx. 3 seconds within 2 minutes of
－
0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to
84
0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the Wi-Fi
89
operating the router.
“None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.
CONNECT/WPS button. In this case, use the “Auto-Scan” or “Manual” method to connect.
Cannot connect to the
network using iPhone/iPod
touch/iPad.
Front panel
Page
0 The network name and password (WEP, etc.) settings are wrong. Configure the network settings
0 Update the iPhone/iPod touch/iPad firmware to the latest version.
－
0 When using a USB cable to configure the settings, the iOS device firmware version needs to support iOS
－
5 or later. When configuring the settings via a wireless connection, iOS 7 or later needs to be supported.
Rear panel
Remote control
unit
104
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back USB memory devices
o Compatible formats
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
Sampling
frequency
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz1
32/44.1/48 kHz
FLAC
ALACz2
AIFF
DSD (2-channel)
Front panel
Rear panel
Remote control
unit
105
Index
Bit
length
Extension
–
.wma
–
.mp3
–
16/24 bits
.wav
16 – 320
kbps
–
.aac/
.m4a/
.mp4
Bit rate
48 – 192
kbps
32 – 320
kbps
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96 kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
–
16/24 bits
.flac
–
16/24 bits
.m4a
–
16/24 bits
.aif/
.aiff
2.8/5.6 MHz
–
1 bit
.dsf/
.dff
Contents
Connections
Playback
Settings
Tips
Appendix
o Maximum Number of Playable Files and Folder
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Item
Memory capacity
Number of folder directory
levels z1
USB memory device
FAT16 : 2 GB, FAT32 : 2 TB
8 levels
Number of folders
500
filesz2
5000
Number of
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front panel
Rear panel
Remote control
unit
106
Index
Contents
Connections
Playback
Settings
This unit supports the following Bluetooth profiles.
0 A2DP (Advanced Audio Distribution Profile) :
When a Bluetooth device that supports this specification is connected,
you can perform high quality streaming distribution of monaural and
stereo audio data.
0 AVRCP (Audio/Video Remote Control Profile) :
When a Bluetooth device that supports this specification is connected,
you can operate the Bluetooth device from this unit.
o Playable radio station specifications
Sampling
frequency
Bit rate
Extension
WMA
32/44.1/48 kHz
48 – 192
kbps
.wma
MP3
32/44.1/48 kHz
32 – 320
kbps
.mp3
MPEG-4 AAC
32/44.1/48 kHz
16 – 320 kbps
.aac/
.m4a/
.mp4
Rear panel
Appendix
Playing back Bluetooth devices
Playing back Internet Radio
Front panel
Tips
Remote control
unit
Bluetooth communications
The radio waves broadcast from this unit may interfere with operations on
medical equipment. The radio wave interference may cause a malfunction.
Therefore, make sure to turn off power to this unit and Bluetooth devices in
the following places.
0 Hospitals, trains, airplanes, gas stands, and other places where
flammable gas may occur.
0 Places near automatic doors and fire alarms.
107
Index
Contents
Connections
Playback
Settings
Sampling
frequency
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit is compatible with WMA META tags.
0 If the image size of an album artwork exceeds 600 kB, then music may
not be played back properly.
0 A server or server software compatible with distribution in the
WMAz1
32/44.1/48 kHz
MP3
32/44.1/48 kHz
WAV
32/44.1/48/
88.2/96/176.4/
192 kHz
MPEG-4 AACz1
32/44.1/48 kHz
corresponding formats is required to play music files via a network.
0 Particularly when you play back large music files, depending on your wireless LAN
environment, the playback sound may be interrupted. In this case, make the wired
LAN connection.
32/44.1/48/
88.2/96/176.4/
192 kHz
32/44.1/48/
88.2/96kHz
32/44.1/48/
88.2/96/176.4/
192 kHz
FLAC
ALACz2
AIFF
DSD (2-channel)
Rear panel
Remote control
unit
Appendix
o Playback file specifications
Playing back files stored on PC or
NAS
Front panel
Tips
108
Index
2.8/5.6 MHz
Bit rate
Bit length
Extension
48 – 192
kbps
32 – 320
kbps
–
.wma
–
.mp3
–
16/24 bits
.wav
16 – 320
kbps
–
.aac/
.m4a/
.mp4
–
16/24 bits
.flac
–
16/24 bits
.m4a
–
16/24 bits
.aif/
.aiff
–
1 bit
.dsf/
.dff
Contents
Connections
Playback
Settings
Rear panel
Remote control
unit
Appendix
Last function memory
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
z2 Copyright [2012] [D&M Holdings. Inc.] Licensed under the Apache License,
Version 2.0 (the “License”); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Front panel
Tips
This stores the settings as they were immediately before going into the
standby mode.
When the power is turned back on, the settings are restored to as they
were immediately before going into the standby mode.
109
Index
Contents
Connections
Playback
Settings
Explanation of terms
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006,2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
ALAC (Apple Lossless Audio Codec)
This is a codec for lossless audio compression method developed by
Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data
compressed to approximately 60 – 70% can be decompressed to exactly
the same original data.
AIFF (Audio Interchange File Format)
This is an uncompressed and lossless format for digital audio. Use AIFF
files to burn high-quality audio CDs from imported songs. AIFF files use
approximately 10 MB of disk space per minute.
DSD (Direct-Stream Digital)
One of the audio data recording methods, it is the signal aspect used to
store audio signals on a super audio CD, and is Δ-Σ modulated digital
audio. It is configured of an array of single bit values at a 2.8 MHz
sampling rate.
Rear panel
Appendix
FLAC
o Audio
Front panel
Tips
Remote control
unit
110
Index
Contents
Connections
Playback
Settings
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Front panel
Rear panel
Remote control
unit
Tips
Appendix
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player. To encode
WMA files, only use applications authorized by Microsoft Corporation. If
you use an unauthorized application, the file may not work properly.
111
Index
Contents
Connections
Playback
Settings
Appendix
o Network
Sampling frequency
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
AirPlay
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod
touch/iPad to a compatible device via the network.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/or service marks of
Digital Living Network Alliance. Some contents may not be compatible
with other DLNA CERTIFIED® products.
Speaker impedance
This is an AC resistance value, indicated in Ω (ohms). Greater power can
be obtained when this value is smaller.
Bit rate
This expresses the read amount per 1 second of video/audio data
recorded. A larger number means higher sound quality, but also means a
larger file size.
Front panel
Tips
Rear panel
Remote control
unit
112
Index
Contents
Connections
Playback
Settings
Tips
Appendix
vTuner
WPA2 (Wi-Fi Protected Access 2)
This is a free online content server for Internet Radio.
For inquiries about this service, visit the vTuner site below.
vTuner website:
http://www.radiodenon.com
This product is protected by certain intellectual property rights of Nothing
Else Matters Software and BridgeCo. Use or distribution of such
technology outside of this product is prohibited without a license from
Nothing Else Matters Software and BridgeCo or an authorized subsidiary.
This is a new version of the WPA established by the Wi-Fi Alliance,
compatible with more secure AES encryption.
WEP Key (network key)
This is a standard drawn up by the Wi-Fi Alliance to ease the task of
setting up wireless LAN connections and configuring security.
WPA-PSK/WPA2-PSK (Pre-shared Key)
This is a simple authentication system for mutual authentication when a
preset character string matches on the wireless LAN access point and
client.
WPS (Wi-Fi Protected Setup)
This is key information used for encrypting data when conducting data
transfer. On this unit, the same WEP key is used for data encryption and
decryption, so the same WEP key must be set on both devices in order for
communications to be established between them.
Network Names (SSID: Service Set Identifier)
When forming wireless LAN networks, groups are formed to prevent
interference, data theft, etc. These groups are based on “SSID (network
names)”. For enhanced security, a WEP key is set so that communication
is unavailable unless both the “SSID” and the WEP key match. This is
suitable for constructing a simplified network.
Wi-Fi®
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
WPA (Wi-Fi Protected Access)
This is a security standard established by the Wi-Fi Alliance. In addition to
the conventional SSID (network name) and WEP key (network key), it also
uses a user identification function and encrypting protocol for stronger
security.
Front panel
Rear panel
Remote control
unit
113
Index
Contents
Connections
Playback
Settings
o Others
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to this unit using Bluetooth. When paired, the devices
authenticate each other and can connect without mistaken connections
occurring.
When using Bluetooth connection for the first time, you need to pair this
unit and the Bluetooth device to be connected.
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason.
Front panel
Rear panel
Remote control
unit
114
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Trademark information
.
.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc.
is under license. Other trademarks and trade names are those of their
respective owners.
.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, or iPhone, may affect wireless performance.
AirPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
0 Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano and iPod touch for private copy and playback of non-copyrighted
contents and contents whose copy and playback is permitted by law.
Copyright infringement is prohibited by law.
.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi
Alliance.
Wi-Fi Certification provides assurance that the device has passed the
interoperability test conducted by the Wi-Fi Alliance, a group that certifies
interoperability among wireless LAN devices.
Front panel
Rear panel
Remote control
unit
.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
Adobe, the Adobe logo and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
115
Index
Contents
Connections
Playback
Settings
Specifications
o Audio section
0 Audio amplifier
Rated output:
2-channel driving
35 W + 35 W
(8 Ω/ohms, 1 kHz, THD+N 0.01 %)
Dynamic power:
70 W + 70 W
(4 Ω/ohms, 1 kHz, THD+N 0.01 %)
Output connectors:
Speaker: 4-16 Ω/ohms (impedance)
Compatible with headphones/stereo headphones
Input sensitivity/impedance:
Analog In: 200 mV/22 kΩ/kohms
Total harmonic distortion
(1 kHz, 17.5 W, 8 Ω/ohms):
Analog In: 0.04 %
S/N ratio (35 W, 8 Ω/ohms, IHF-A):
Digital In : 110 dB
Tone control:
Bass : ±8 dB (100 Hz)
Treble : ±8 dB (12 kHz)
Frequency response:
Analog In : 20 Hz – 96 kHz
Front panel
Rear panel
Remote control
unit
116
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
o Wireless LAN section
Network type (wireless LAN standard):
Security:
Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)z1
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
No. of channels:
1 – 13 ch
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Front panel
Rear panel
Remote control
unit
117
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth section
Communications system:
Bluetooth Version 2.1 + EDR (Enhanced Data Rate)
Transmission power:
Maximum 2.5 mW (Class 2)
Maximum communication range:
Approx. 10 m in line of sightz2
Frequency band:
2.4 GHz band
Modulation scheme:
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
Corresponding codec:
SBC, AAC
Transmission range (A2DP):
20 Hz - 20,000 Hz
z2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
Front panel
Rear panel
Remote control
unit
118
Index
Contents
Connections
Playback
Settings
o General
Power supply:
AC 220 - 230 V, 50/60 Hz
Power consumption:
60 W
Power consumption in standby mode :
0.3 W
Power consumption in “Network Control” –
“On” mode:
3W
0 For purposes of improvement, specifications and design are subject to change without notice.
Front panel
Rear panel
Remote control
unit
119
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
o Dimensions
218
17
30
337
304
56
16
Unit : mm
98
160
56
280
30
.
220
6
25
30
o Weight : 4.8 kg
Front panel
Rear panel
Remote control
unit
120
Index
Appendix
Contents
Connections
Index
Playback
Settings
vF
Firmware update ............................................ 79
AirPlay ............................................................ 55
vI
Bluetooth device ............................................ 48
vD
Display’s brightness ....................................... 70
DLNA ........................................................... 110
PC .......................................................... 36, 108
vR
Random playback .............................. 36, 42, 46
Inputting characters ........................................ 75
vB
Appendix
vP
Favorites ........................................................ 40
vA
Tips
Remote play function ..................................... 59
Internet Radio ................................................. 32
Repeat playback ................................ 36, 42, 46
iPod .................................................... 23, 42, 45
Resetting factory settings ............................... 81
vM
vS
Menu map ...................................................... 71
Sleep timer ..................................................... 70
Muting ............................................................ 31
Spotify ............................................................ 58
vN
vT
NAS ........................................................ 36, 108
Network settings ............................................ 82
Tone ............................................................... 69
vU
USB memory device ................................ 23, 46
Front panel
Rear panel
Remote control
unit
121
Index
Contents
Connections
Playback
Settings
vV
Volume ........................................................... 31
vTuner ............................................................ 35
vW
Web control function ...................................... 62
Wired LAN ...................................................... 25
Front panel
Rear panel
Remote control
unit
122
Index
Tips
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
License
This section describes software license used for this unit.
To maintain the correct content, the original (English) is used.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.
o Boost
http://www.boost.org/
Boost Software License – Version 1.0 – August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license
(the “Software”) to use, reproduce, display, distribute, execute, and transmit the
Software, and to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all
copies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR
OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
o FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK
OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
o Expat
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION
OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT
AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU
CANNOT MAKE ANY USE OF THE WORK.
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
Ltd
Front panel
Rear panel
Remote control
unit
123
Index
Contents
Connections
Playback
Settings
Definitions. “Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may be used by a
user.
“Author” means the individual or entity that offers the Work under the terms of this
License.
“Derivative Work” means a work based upon the Work or upon the Work and other
pre-existing works.
“Executable Files” refer to the executables, binary files, configuration and any
required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other
medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration files used to
create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or has been
modified in accordance with the consent of the Author, such consent being in the full
discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher, including the
Source Code, Executable Files, binaries, data files, documentation, whitepapers and
the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise your rights
under this License.
Rear panel
Remote control
unit
Appendix
You may otherwise modify Your copy of this Work (excluding the Articles) in any way
to create a Derivative Work, provided that You insert a prominent notice in each
changed file stating how, when and where You changed that file.
You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a
larger (possibly commercial) software distribution.
The Articles discussing the Work published in any form by the author may not be
distributed or republished without the Author’s consent. The author retains copyright
to any such Articles. You may use the Executable Files and Source Code pursuant to
this License but you may not repost or republish or otherwise distribute or make
available the Articles, without the prior written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source Code or
Executable Files this Work shall not be considered part of this Work and will not be
subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each Author
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable (except as stated in this section) patent license to make, have made, use,
import, and otherwise transfer the Work.
Restrictions. The license granted in Section 3 above is expressly made subject to
and limited by the following restrictions: You agree not to remove any of the original
copyright, patent, trademark, and attribution notices and associated disclaimers that
may appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a product of Your
own.
The name of the Author may not be used to endorse or promote products derived
from the Work without the prior written consent of the Author.
You agree not to sell, lease, or rent any part of the Work. This does not restrict you
from including the Work or any part of the Work inside a larger software distribution
that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or
restrict any rights arising from fair use, fair dealing, first sale or other limitations on the
exclusive rights of the copyright owner under copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the Author hereby
grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the
applicable copyright) license to exercise the rights in the Work as stated below: You
may use the standard version of the Source Code or Executable Files in Your own
applications.
You may apply bug fixes, portability fixes and other modifications obtained from the
Public Domain or from the Author. A Work modified in such a way shall still be
considered the standard version and will be subject to this License.
Front panel
Tips
124
Index
Contents
Connections
Playback
Settings
You may distribute the Executable Files and Source Code only under the terms of
this License, and You must include a copy of, or the Uniform Resource Identifier for,
this License with every copy of the Executable Files or Source Code You distribute
and ensure that anyone receiving such Executable Files and Source Code agrees
that the terms of this License apply to such Executable Files and/or Source Code.
You may not offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients’ exercise of the rights granted hereunder. You may not
sublicense the Work. You must keep intact all notices that refer to this License and to
the disclaimer of warranties. You may not distribute the Executable Files or Source
Code with any technological measures that control access or use of the Work in a
manner inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable
export laws. You agree to comply with all such laws and regulations that may apply to
the Work after Your receipt of the Work.
Rear panel
Remote control
unit
Appendix
This License and the rights granted hereunder will terminate automatically upon any
breach by You of any term of this License. Individuals or entities who have received
Derivative Works from You under this License, however, will not have their licenses
terminated provided such individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this
License.
If You bring a copyright, trademark, patent or any other infringement claim against
any contributor over infringements You claim are made by the Work, your License
from such contributor to the Work ends automatically.
Subject to the above terms and conditions, this License is perpetual (for the duration
of the applicable copyright in the Work). Notwithstanding the above, the Author
reserves the right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any such election will not
serve to withdraw this License (or any other license that has been, or is required to
be, granted under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”,
“WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME
ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT
INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL
EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,
INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NONINFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS
CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS
DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE
WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the Author and the
Publisher from and against any claims, suits, losses, damages, liabilities, costs, and
expenses (including reasonable legal or attorneys’ fees) resulting from or relating to
any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE
USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE
PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Termination.
Front panel
Tips
Publisher. The parties hereby confirm that the Publisher shall not, under any
circumstances, be responsible for and shall not have any liability in respect of the
subject matter of this License. The Publisher makes no warranty whatsoever in
connection with the Work and shall not be liable to You or any party on any legal
theory for any damages whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time
without notice
Miscellaneous
This License shall be governed by the laws of the location of the head office of the
Author or if the Author is an individual, the laws of location of the principal place of
residence of the Author.
If any provision of this License is invalid or unenforceable under applicable law, it
shall not affect the validity or enforceability of the remainder of the terms of this
License, and without further action by the parties to this License, such provision shall
be reformed to the minimum extent necessary to make such provision valid and
enforceable.
125
Index
Contents
Connections
Playback
Settings
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Rear panel
Remote control
unit
Appendix
o libvorbis
No term or provision of this License shall be deemed waived and no breach
consented to unless such waiver or consent shall be in writing and signed by the
party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with respect to the
Work licensed herein. There are no understandings, agreements or representations
with respect to the Work not specified herein. The Author shall not be bound by any
additional provisions that may appear in any communication from You. This License
may not be modified without the mutual written agreement of the Author and You
Front panel
Tips
o Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002 – 2009 Xiph.org Foundation Changes Copyright (C) 2009 – 2010
Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
126
Index
Contents
Connections
Playback
Settings
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.c
Copyright (C) 1997 – 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
The names of its contributors may not be used to endorse or promote products
derived from this software without specific prior written permission.
o Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
Rear panel
Remote control
unit
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Front panel
Tips
127
Index
Contents
Connections
Playback
Settings
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
o zlib
http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July
18th, 2005
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
o c-ares
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Permission to use, copy, modify, and distribute this software and its documentation
for any purpose and without fee is hereby granted, provided that the above copyright
notice appear in all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of M.I.T. not be used
in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided “as is” without express or implied warranty.
Jean-loup Gailly [email protected], Mark Adler [email protected]
Rear panel
Remote control
unit
Appendix
o cURL
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Front panel
Tips
128
Index
Contents
Connections
Playback
Settings
o License information for the software used in
the unit
About GPL (GNU-General Public License), LGPL (GNU Lesser
General Public License) License
This product uses GPL/LGPL software and software made by other
companies.
After you purchase this product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is used in the product.
Denon provides the source code based on the GPL and LPGL
licenses at the actual cost upon your request to our customer service
center.
However, note that we make no guarantees concerning the source
code.
Please also understand that we do not offer support for the contents of
the source code.
Front panel
Rear panel
Remote control
unit
129
Index
Tips
Appendix
.
www.denon.com
130
3520 10423 00AD
Copyright ©2015 D&M Holdings Inc. All Rights Reserved.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project