EXTender PBXgateway™ II - Datasheet
EXTender PBXgateway II
TM
TM
EXTender PBXgateway II
This robust voice network gateway extends feature-rich corporate voice systems to branch
offices, call centers, home-based call center agents and teleworkers over traditional and
next-generation networks, terminating all MCK client devices
The EXTender PBXgatewayTM II
is a high performance
gateway that resides at the
corporate voice system site
PRODUCT OVERVIEW
and terminates all MCK
EXTenderTM clients including:
•MCK EXTenderTM 7000 for
Branch Offices3
•MCK EXTender 6000 for
Branch Offices
The EXTender PBXgateway II is MCK’s
most robust platform designed to support
advanced business applications to be used
by branch offices, call centers, home-
TM
•MCK EXTender 4000 for IP
based call center agents and teleworkers.
This new-generation gateway includes all
TM
of the features and functionality of the
The EXTender PBXgateway II can be
configured to operate in either a managed
IP network or a point-to-point synchronous WAN environment over traditional
networks. In a traditional WAN environment, multiple MCK EXTender 7000 or
•MCK EXTender 3000 for
ISDN1 (DEFINITY, Meridian
and Norstar)
EXTender PBXgateway and more.
The EXTender PBXgateway II is expand-
into a single EXTender PBXgateway II
•MCK EXTender 1000+ for
Analog2 (DEFINITY only)
able in 24-user increments and terminates
running serial RVP. The RVP relies on
all of MCK’s client products. With MCK’s
HDLC encapsulation over a serial port
The EXTender PBXgateway II
EXTender PBXgateway II, your remote
to transmit voice signals.
operates in serial Remote
workers can now enjoy all the features of
Voice Protocol (RVP)TM mode
the corporate voice system, enriched local
over traditional networks and
calling and survivability. That’s because
in RVPoIPTM mode over next-
the EXTender PBXgateway II works
generation networks.
over circuit- or packet-based networks
TM
TM
and includes an optional T1/PRI/FR
MCK’s Distributed Voice Solutions
affordably and seamlessly extend
the features and functionality of
existing corporate voice systems to:
• Branch Offices
network interface card.
REMOTE VOICE PROTOCOL (RVP)
over Serial Connections
6000 for Branch Offices can be connected
REMOTE VOICE PROTOCOL over
IP Connections (RVPoIP)
To extend remote voice capability over a
managed IP network, simply install an
EXTender PBXgateway II at your corporate
site and then choose a combination of
IP-capable clients to meet your needs.
Branch offices, teleworkers and remote
call center agents can be connected using
• Call Centers
MCK’s Remote Voice Protocol (RVP)
standard IP network termination devices
• Home-Based
Call Center Agents
converts digital voice and phone signaling
such as IP routers or DSL modems.
into highly efficient data packets.
Software version 3.1, supports up to two
Sophisticated software features include
MCK EXTender 7000 for Branch Offices
a G.165-compliant echo canceller enhanced
to be connected into a single EXTender
with extremely robust double-talk
PBXgateway II running RVPoIP. MCK’s
performance, manufacturer-provided
RVPoIP relies on UDP/IP to transmit voice
PBX protocols and a range of industry
over IP networks.
• Teleworkers
across traditional and nextgeneration networks.
standard voice compression options.
EXTender PBXgateway II
TM
MANAGEMENT FEATURES
MCK’s business voice solutions have
been designed for operational simplicity.
All of the system’s configuration,
management, and administrative and
diagnostic functions may be managed
from the EXTender PBXgateway II
using a direct serial connection, dial
up modem, HTML, Telnet or an inband
network connection from a remote
client. This flexibility allows companies
to maximize their system administration resources and lowers
operating costs.
The EXTender PBXgateway II is
equipped with dual DB-9 console ports
(see picture below). These ports allow a
system administrator to attach a
modem to one and use the other for a
local terminal connection. This versatility
makes remote troubleshooting and
maintenance a breeze.
KEY BENEFITS
• Flexibility
The optional network interface card
allows for direct termination of
T1, PRI and FR lines.
Two DB-9 console ports for easy system
management
Easy–to-use configuration tools
enable virtual management of remote
users from a central location.
Dual 10/100Base-T ports allow
connection to high-speed Ethernet
networks and separate segments for
voice and management traffic.
• Investment Protection
MCK is committed to providing you
with flexible product solutions for
today’s, and tomorrow’s, needs.
Dual DB-9 console ports enable
multiple management interface connections to operate simultaneously.
KEY FEATURES
Configure the EXTender PBXgateway II
to operate in managed IP network
(Layer 3) or in traditional circuit
switched and frame relay (Layer 2)
environments.
FRONT VIEW
• Ease-of-Use
Simple installation process.
• Increased Productivity
Remote employees are able to use
the same full-featured digital sets and
access corporate voice features, like
voicemail, call accounting systems,
unified messaging and ACD systems.
• Network Efficiency
Leverage IP data network infrastructure for both voice and data traffic.
•Support for synchronous and
asynchronous terminal adapters
•Encrypted username and password
allocated by system administrator to
each port
•Network down recovery
•Call suspend mode on ISDN Lines
with Asynch terminal adapters
•Support for IP Precedence and
DiffServ QoS mechanisms
•One EXTender PBXgateway II can
support both serial RVP and RVPoIP
remote clients simultaneously.
•Multiple MCK EXTender 7000 or 6000
for Branch Offices can be attached to
one EXTender PBXgateway II.
•The EXTender PBXgateway II with
the integrated network interface card
terminates T1, PRI and FR networks
directly, eliminating the need for
external CSU/DSU devices.
SYSTEM COMPATIBILITY
•Alcatel: 4400 and 4200
•AvayaTM: DEFINITY® ECS
(all G3 releases) and ECLIPS Media
Servers and Gateways (digital
phones only)
•Ericsson: MD110
•NEC: NEAX2000™, NEAX2400™,
NEAX Express and Electra Elite
•When running serial RVP between
an MCK EXTender 6000 and an
EXTender PBXgateway II, the
network access device is connected
via one of the DB-25 WAN ports.
•Remote clients that support serial
RVP are the MCK EXTender 7000
and 6000, MCK EXTender 30001,
and MCK EXTender 1000+ 2 in pointto-point mode.
•Nortel: BCM, Meridian® and Norstar®
•Panasonic: DBS 576 and 576HD
•Toshiba: Strata DK
•In RVPoIP applications, the network
access device should be configured
to provide Quality of Service* (QoS)
in order to guarantee voice quality.
•IP or packet-based networks are
terminated through a router.
•Minimal setup programming
required, accomplished via dial up
modem, Telnet, RS-232 console
interface, inband RVP or HTML
interface.
•Remote clients that support RVPoIP
are the MCK EXTender 7000 and 6000
and the MCK EXTender 4000.
GENERAL SET-UP GUIDELINES
•The EXTender PBXgateway II can
be ordered with or without a 2-port
T1/PRI/FR network interface card.
•The EXTender PBXgateway II can be
configured to run on IP transport or
traditional circuit-switched and frame
relay networks.
CONNECTORS INCLUDED IN BACKPLANE OF UNIT:
•When running RVPoIP, this gateway
can be connected to the LAN via two
10/100Base-T ports simultaneously.
Either port can be configured to carry
voice and/or management, allowing
both traffic types to be transmitted on
separate LAN segments.
•One PCM port for network expansion cards (optional)
•Internal power supply
•Network interface card with two RJ-45 connectors
•Two RJ-45 10/100Base-T Ethernet for RVPoIP and Telnet/HTML system management
•Two DB-25 WAN ports for serial RVP connection. Redundant interfaces
include V.35, RS-232 or RS-530
•One Amphenol connector for 50-pin RJ-21 cable for interface with digital telephone sets
EXTender PBXgateway II
TM
ONLINE RESOURCES
•List of recommended network access
devices available at www.mck.com in
the Products & Solutions section
SOFTWARE SUPPORT
•TCP/IP protocol support for IP traffic
and management access
•RVPoIP uses UDP/IP protocol for
voice transmission
•Serial RVP uses HDLC encapsulation
for voice transmission
•Management and Utilities – Telnet,
inband RVP, RS-232 console interface,
SNMP and HTML
•Wind River’s VxWorks® operating
system
•Software upgradeable via LAN FTP,
RS-232 serial port to PC, or inband
connection between the EXTender
PBXgateway II and the MCK
EXTender 7000 and 6000
VOICE PROTOCOLS
•Choice of voice compression standards:
- G.729A (8 kbps)
- G.726 (24 or 32 kbps ADPCM)
- G.711 (64 kbps PCM)
•G.165 echo canceller software, with
MCK proprietary double-talk
detection enhancement
•MCK Remote Voice Protocol (RVP)
•MCK Remote Voice Protocol over IP
(RVPoIP)
•IP voice packets are tagged for
network traffic prioritization using IP
Precedence or DiffServ
QUICK REFERENCE CHART
EXTender PBXgatewayTM II
EXTender PBXgatewayTM
Available with 2-port integrated
network card
Terminates network connections
using external devices
Supports all MCK EXTenders
Supports the MCK EXTenderTM 6000
and the MCK EXTenderTM 4000
Equipped with two DB-9 console ports
Equipped with one DB-9 console port
Outfitted with two 10/100 Base-T
LAN ports
Outfitted with one 10Base-T LAN port
POWER SUPPLY
•Internal
•Universal auto ranging
•Line voltage: 100 – 240 V
•Frequency: 47 – 63 Hz
•Maximum power consumption:
75 Watts
DIMENSIONS
•Size: 17" x 11" x 1¾"
(432mm x 280mm x 44mm)
•Weight: 8.3 lbs (3.8 kg)
OPERATING ENVIRONMENT
•Temperature: 32° – 130° F (0° – 55° C)
Other Components:
•Motorola MPC860T processor
•16 MB Flash Memory, 16 MB SDRAM
•DSP Analog Devices 2185 (52 MIPS)
Supported for DEFINITY by the EXTender PBXgateway II
running software release 2.1 or later. Supported for Meridian
by the EXTender PBXgateway II running software release 2.21
or later. Supported for Norstar by the EXTender PBXgateway II
running software release 3.0 or later. Some PBXs may require
a T1 card to be installed in the EXTender PBXgateway II to
support MCK EXTender 3000 remote modules.
2
Supported for DEFINITY by the EXTender PBXgateway II
running software release 2.1 and equipped with an analog
client card. The analog client card is not field upgradeable.
3
Software release 3.1 is required for direct termination of
frame relay networks.
Visit www.mck.com for more information on this product.
Product specifications subject to change without notice.
MCK, the MCK logo, MCK EXTender, PBXgateway, RVP and
RVPoIP are trademarks of MCK Communications, Inc. Other
brand and product names referenced herein are trademarks
of their respective holders.
*MCK’s IP-based products utilize Voice over IP (VoIP) technology
to deliver remote voice solutions. The voice quality of these
solutions is dependent on variables such as available bandwidth, network latency and quality of service (QoS) initiatives,
all of which are controlled by the network and Internet service
providers. Because these variables are not in MCK’s control,
it cannot guarantee the performance of the user’s IP-based
remote voice solution.
© 2003 MCK Communications, Inc.
01-PBXGII-0903
•Relative humidity: 5 to 95%
(non-condensing)
REGULATORY APPROVALS
•FCC Part 15 Class A and FCC Part 68,
CE Mark, Industry Canada CS-03,
NRTL/CSA, VCCI Class 1 and
CISPR 22 Class A
WARRANTY
HARDWARE
•Form Factor: Low profile, 1U rack
mountable unit
1
•One-year limited warranty for
parts and labor
MCK Communications, Inc.
Corporate Headquarters
117 Kendrick Street
Needham, MA 02494-0708
Toll Free: 888-454-7979
Telephone : 617-454-6100
Fax: 617-454-6101
www.mck.com
Research & Development Center
4040 Bowness Road N.W.
Calgary, AB Canada T3B 3R7
Toll Free: 800-661-2625
Telephone: 403-247-9777
Fax: 403-247-9078
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising