Catalogue Sheet: Ultima™ Combo Series

Catalogue Sheet: Ultima™ Combo Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
ULTIMA™ SERIES
Thermoplastic
Combination Unit
FEATURES
The Ultima™ Series of combination units
(emergency light battery unit with an Exit
Sign) are designed with aesthetics, ease of
installation and performance in mind.
• One-pack combination of battery unit
and Exit Sign, a compact and
contemporary design
• Durable injection-molded thermoplastic
housing with push-to-snap design
• Available in single or double face
configurations both with means for
ceiling mounting
®
™
• C omes with the Ready-Lite Ultima
EZ2 canopy and field-selectable snap
chevrons for quick and easy installation
• E xit Sign module illuminated by long-life
ALINGAP red LEDs
• Two MR16 halogen lamps, shielded by
a clear polycarbonate cover
• Optional MR16 LED lamps with life
expectancy 50,000+ hours
• Sealed, maintenance-free, LeadCalcium or Nickel-Metal-Hydride
batteries
• Remote load capacity up to 90W
• Dual voltage input: 120/347VAC or
120/277VAC.
• Optional vandal-resistant shield with
tamper-proof screws
• Certified CSA C22.2 No.141
• Optional advance diagnostics circuitry
available
Supply and install the Ready-Lite® Ultima™ Series combination emergency light battery unit and Exit Sign.
The standard equipment shall operate with a dual voltage input of 120/347VAC. The unit shall be suitable for
wall or ceiling mount. The unit frame and face plates shall be made of injection-molded durable high-impact
thermoplastic and come standard with snap in/out chevrons. No screws are necessary to hold the faceplate
or backplate to the housing. The one-piece thermoplastic frame is molded in white (optional black). The
faceplates shall feature a uniformly illuminated legend.
The light source shall be light emitting diodes (LED) and shall provide illumination in normal and emergency
operation and shall be mounted inside the combination housing. Red LED technology shall be ALINGAP. An
LED-sensitive diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters with
even illumination. The unit shall be equipped with two emergency heads with tool-less adjustable swivels
(lamps of 12W or less) and long-life MR-16 type lamps of ___ V and ___ W. Each lamp shall be protected by
a snap-on, shock-absorbent, transparent polycarbonate cover.
The unit shall be equipped with a test switch and a green pilot light, located on the face plate above the EXIT
legend. The battery charger shall be driven by a micro-controller. All electronic circuitry (charger, LED driver,
LED’s) shall be installed on a single printed circuit board PCB. The unit equipped with self-testing / selfdiagnostic features shall automatically self test for one minute every 30 days, 10 minutes in the 6th month
and 30 minutes annually. When a fault is detected, the bi-colour pilot light shall turn from green to red and
shall flash, identifying the source of the failure: battery, charger circuitry, lamp load, LED strip.
The Exit Sign module shall be CSA-C860 approved.
.
The combo unit shall be Ready-Lite® Model:
U L T I M A ™ FA M I LY
Ultima™ Exit P. 53
Ultima™ Battery P. 122-123
WIRE GUARDS
460.0078-RL
wall mount
POWER CONSUMPTION
MODEL
AC SPECS
Exit Sign Module
less than 2W
L20
L50
12L50
0.11/0.04 A
120/347VAC
12H5
0.22/0.08 A
12H10
56
30MIN
WATTAGE CAPACITY
1H00
1H30
2H00
4H00
-
-
-
-
-
20
15
12
8
-
50
30
24
16
8
50
30
24
16
8
50
36
24
18
9
100
72
48
36
18
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
DIMENSIONS
Dimensions are approximate and subject to change.
4-7/8” [12.3 cm]
ULTIMA™ SERIES
11-1/4” [28.7 cm]
12-3/8” [31.5 cm]
Thermoplastic
Combination Unit
17” [43.2 cm]
3-3/8” [8.6 cm]
ORDERING INFORMATION
POWERPACK
# OF HEADS
HEAD STYLE/ WATTAGE
FACES/MOUNTING
VOLTAGE
COLOUR
LEGEND
L20= 6V-20W
lead cal
L50= 6V-50W
lead cal
12L50= 12V-50W
lead cal
12H5= 12V-50W
NiMH
12H10= 12V-100W
NiMH
Blank= no
heads
-2= two
heads
LD1= M
R16 LED, 6V-4W
LD7= M
R16 LED, 12V-4W
LD9= M
R16 LED, 12V-5W
LD10= M
R16 LED, 12V6W
M6= MR16 halogen,
6V-6W
M10= MR16 halogen,
6V-10W or 12V-10W
M12= MR16 halogen,
12V-12W
M20= MR16 halogen,
12V-20W
-ULT1= s ingle face
ceiling or
wall mount
-ULT2= double
face ceiling
mount
-ULT1N= single
face wall
mount (less
canopy)
-ULTU= universal,
2 faces
backplate
and canopy
3= 120/347VAC
2= 120/277VAC
B= black
W= factory
white
Blank= red
legend
G= green
legend
OPTIONS
Blank= no options
AD= auto-diagnostics
ADN= auto-diagnostics, non-audible
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system
interface*
BA= brushed aluminum exit stencil
D3= time delay (15 minutes)
TP= tamper-proof screws**
VRTP1= p
olycarbonate shield with
tamper-proof screws, single
face**
VRTP2= p
olycarbonate shield with
tamper-proof screws, double
face**
*Not all options available with NEXUS®
System. Please consult your sales
representative
** 091957-RL= tamper-proof bit (sold
separately)
** VRTP1 & VRTP2 not available with
-ULTU
E X A M P L E : L 2 0 - 2 M 6 - U LT 1 3 W
57
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement