Material Safety Data Sheet

Material Safety Data Sheet
Material Safety Data Sheet
1 Manufacturer Information
6400217 6400218
Company Name
Ku Ping Enterprise Co.,Ltd
Address
5.LANE 302,HSIN SHUH RD.,HSIN CHUANG CITY,TAIPEI HSIEN,TAIWAN,R.O.C
Person in charge
Tony Yang
+886-2-82013987-9
Emergency Pone #
+886-2-82012388/82012368
Fax #
Solder(including various shapes of bar, ingot, …..)
Item Name
Sn99.3/Cu0.7
Alloy composition
2 Hazardous Ingredients
Hazardous Components
Common Name
Chemical Formula
weight %
Tin
Silver
Copper
Stibium
Rosin
Sn
Ag
Cu
Sb
-
99.3
CAS. No.
7440-31-5
7440-22-4
0.7
7440-50-8
7440-36-0
2.5~3.0 9/7/8050
TWA
STEL
CEILING
LD 50
LC 50
2
0.01
0.2
0.5
0.1
4
0.03
N/A
1.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
3 Hazards Identification
Physical State and Appearance
Solid
Emergency Overview
Warning !
Avoid contact with eyes. Avoid prolonged or repeated
contact with skin. Wash thoroughly after handling.
Routes of Entry
Potential Acute Health Effects
Inhalation.Ingestion.
Eyes This product may be hazardous in case of eye contact
( irritant ).
Skin This product may be hazardous in case of skin contact
( irritant, sensitizer). Skin inflammation is characterized
by itching, scaling, reddening, or, occasionally, blistering.
Inhalation Fumes and/ or dusts produced by this product may be
hazardous in case of inhalation.
Ingestion This product may be hazardous in case of ingestion.
Potential Chronic Health Effects
Chronic effects: Fumes and /or dusts produced by this
product may be hazardous in case of ingestion, of
inhalation.
This product may be hazardous in case of skin contact
(irritant, sensitizer), of eye contact (irritant). Noncorrosive for skin. Non-permeator by skin.
Medical Conditions Aggravated by Overexposure Repeated or prolonged exposure is not known to
aggravate medical condition.
Overexposure/ Signs/ Symptoms
Not available.
4 First Aid Measures
Eye Contact
Check for and remove any contact lenses. In case of
contact, immediately flush eyes with plenty of water
for at least 15 minutes. Get medical attention.
Skin Contact
In case of contact, immediately flush skin with plenty of
water for at least 15 minutes while removing
contaminated clothing and shoes. Cover the irritated skin
with emollient. Wash clothing before reuse. Thoroughly
clean shoes beofre reuse. Get medical attention.
Hazardous Skin Contact
Wash with a disinfectant soap and cover the
contaminated skin with an anti-bacterial cream. Seek
medical attention.
Inhalation
If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen.
Get medical attention.
Hazardous Inhalation
Not available.
Ingestion
Do NOT induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an
unconscious person. If large quantities of this material
are swallowed, call a physician immediately. Loosen
tight clothing such as a collar, tie, belt or waistband.
Hazardous Ingestion
Not available.
Notes to Physcian
Not available.
5 Fire Fighting Measures
Flammability of the product
Non-flammable.
Auto-Ignition Temperature
Not applicable.
Flash Points
Flammable Limits
Products of Combustion
Not applicable.
Not applicable.
Not available.
Fire Hazards in Presence of Various Substance
Not applicable.
Explosion Hazards in Presence of Various Substance
Non-explosive in presence of open flames and sparks,
of shocks.
Fire Fighting Media and Instructions
Not applicable.
Protective Clothing ( Fire )
Not applicable.
Special Remarks on Fire Hazards
Not available.
Special Remarks on Explosion Hazards
Not available.
6 Accidental Release Measures
Small Spill and Leak
Use approprite tools to put the spilled solid in a convenient waste
disposal container. Finish cleaning by spreading water on the
contaminated surface and dispose of according to local and regional
authority requirements.
Large Spill and Leak
Use a shovel to put the material into a convenient waste disposal
container. Finish cleaning by spreading water on the contaminated
surface and allow to evacuate through the sanitary system.
7 Handling and Storage
Handling
Avoid contact with eyes. Avoid prolonged or repeated contact with skin.
Wash thoroughly after handling.
Storage
Keep container tightly closed. Keep container in a cool, well-ventilated area.
8 Exposure Controls, Personal Protection
Engineering Protection
Use process enclosures, local exhaust ventilation, or other engineering
controls to keep airborne levels below recommended exposure limits
If user operations generate dust, fume or mist, use ventilation to keep
exposure to airborne contaminants below the exposure limit.
Personal Protection
Eyes Splash goggles.
Body Lab coat.
Respiratory Dust respirator. Be sure to use an approved/ certified respirator or
equivalent. Wear appropriate respirator when ventilation.
Hands Gloves.
Feet Not applicable.
Note: Suggested protective clothing may not be adequate for a specific process. Consult a specialist before using.
Personal Protection in case of a large Spill
Splash goggles. Full Suit. Dust respirator. Boots. Gloves.
A self contained breathing apparatus should be used to
avoid inhalation of the product. Suggested protective
clothing might not be sufficient; consult a specialist
BEFORE handling this product.
9 Physical and Chemical Properties
Physical State and Appearance
Solid
Molecular Weight
Not applicable.
Chemical Formula
Not applicable.
pH(1% Soln/ Water )
Not applicable.
Not available.
Not available.
217~218℃ (422.6~424.4℉)
Not available.
Not applicable.
Not available.
Not available.
Not available.
Not available.
Not available.
sliver-grey.
7.38 ( water =1 )
Not available.
Not available.
Not available.
The product is insoluble in water and oil.
Acid Value
Boiling/ Condensation Point
Melting/ Freezing Point
Critical Temperature
Vapor Pressure
Vapor Density
Volatility
Odor Threshold
Odor
Taste
Color
Specific Gravity
Evaporation Rate
VOC
Viscosity
LogKow
Ionicity ( In Water )
Dispersion Properties
Non-ionic
Is not dispersed in cold water, hot water,
methanol, diethyl ether, n-octanol, acetone.
Solubility
Insoluble in cold water, hot water, methanol,
diethyl ether, n-octanol, acetone.
Physcial Chemical Comments
Not available.
10 Stability and Reactivity
Stability and Reactivity
This product is stable.
Conditions of Instability
Stable in normal conditions. Over melting point,
will emit toxic tin oxides. ( Tin )
Incompatibility with Various Substances
Slightly reactive with oxidizing agents, acids, moisture.
Hazardous Decomposition Products
Not available.
Hazardous Polymerization
Will not occur.
Corrosivity
Not considered to be corrosive for matals and glass
according to our database.
Special Remarks on Corrosivity
Not available.
11 Toxicological Informaiton
Toxic and Chronic Effects on
Fumes and/or dusts produced by this product may be hazardous in
Humans
case of ingestion, of inhalation. This product may be hazardous in case
of skin contact ( irritant, sensitizer ), of eye contact ( irritant ). Noncorrosive for skin. Non-permeator by skin.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS : Not available.
DEVELOPMENTAL TOXICITY: Not available.
The product may be toxic to kidneys, lungs, liver, mucous membranes,
upper respiratory tract, skin, eye, lens or cornea.
Repeated or prolonged exposure to the substance can produce target
Toxicity to Animals
organs damage.
LD50: N/A
LC50: N/A
Special Remarks on Chronic
Prolonged and repeated exposure to tin oxyde fumes may result in
Effects on Humans
benigne pneumoconiosis ( stannosis ). ( Tin )
Chronic Effects on Humans
N/A
Developmental Toxicity: N/A
Special Remarks on Other
MOLTEN METAL can cause severe Burns!
Toxic Effects on Humans
Fumes and dust may irritate eyes, digestive system and respiratory
tract. ( Tin )
Special Remarks on Toxicity
on Animals
No additional remark
12 Ecological Information
Ecotoxicity
Not available
BOD5 and COD
Not available
Biodegradable/ OECD
Not available
Mobility
Not available
Possibly hazardous short term degradation products are not likely.
However, long term degradation products may arise.
Toxicity of the Products of
The product itself and its products of degradation are not toxic.
Biodegration
Special Remarks on the
Not available.
Products of Biodegradation
13 Disposal considerations
Waste Information
Waste must be disposed of in accordance with federal, state and
local environmental control regulations.
Waste stream
Not available.
Consult your local or regional authorities.
14 Transport Information
DOT Classification
Not a DOT controlled material ( United States ).
Special Provisions for
Not applicable
IMO/ IMDG Classification
Not controlled under IMDG
Marine Pollutant
Not available.
ADR/RID Classification
Not controlled under ADR
ICAO/ IATA Classification
Not controlled under IATA.
15 Regulatory Information
HCS
Class: Sensitizing substance
HCS Classification
Class: Target organ effects.
International Regulations
Not available
EINECS
36/38-Irritating to eyes and skin.
DSCL ( EEC )
43-May cause sensitization by skin contact.
International Lists
No products were found.
16 Other Information
Company
Ku Ping Enterprise Co.,Ltd
Person in Charge
Emergency Phone
886-2-82013987
Fax
886-2-82012388
DATE
10/31/2015
Tony Yang
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement