Denon AVR 2807 - AV Receiver Operating instructions

Denon AVR 2807 - AV Receiver Operating instructions
AV SURROUND RECEIVER
AVR-2807
OPERATING INSTRUCTIONS
INSTRUCCIONES DE FUNCIONAMIENTO
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
2 SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock t persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ESPAÑOL
NEDERLANDS
SVENSKA
• DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which
this declaration relates, is in conformity with the following
standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC
Directive.
• ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf
das sich diese Erklärung bezieht, den folgenden Standards
entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC
und 93/68/EEC.
CAUTION:
To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
When setting up this product, make sure that the AC outlet
you are using is easily acceptable.
VORSICHT:
Um dieses Gerät vollständig von der Stromversorgung
abzutrennen, trennen Sie bitte den Netzstecker von der
Wandsteckdose ab.
Stellen Sie bei der Aufstellung dieses Gerätes sicher, dass die
zu verwendende Wechselstrom-Steckdose leicht zugänglich
ist.
• DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’appareil,
auquel se réfère cette déclaration, est conforme aux standards
suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC, 89/336/EEC et
93/68/EEC.
PRECAUTION:
Pour déconnecter complètement ce produit du courant
secteur, débranchez la prise de la prise murale.
Lors de l’installation de ce produit, assurez-vous que la prise
CA que vous utilisez est compatible.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto, al quale la
nostra dichiarazione si riferisce, è conforme alle seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC,
89/336/EEC e 93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
• DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que este
producto al que hace referencia esta declaración, está conforme con
los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC, 89/336/EEC y
93/68/EEC.
ATTENZIONE:
Per scollegare definitivamente questo prodotto dalla rete di
alimentazione elettrica, togliere la spina dalla relativa presa.
Durante l’installazione, assicurarsi che la presa in CA utilizzata
sia facilmente raggiungibile.
PRECAUCIÓN:
Para desconectar completamente este producto de la
alimentación eléctrica, desconecte el enchufe del enchufe de
la pared.
Al ajustar este producto, asegúrese de que la toma de salida
de CA que esté utilizando sea fácilmente aceptable.
• EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit
produkt, waarop deze verklaring betrekking heeft, in
overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC, 89/336/EEC en
93/68/EEC.
VOORZICHTIGHEID:
Om de voeding van dit product volledig te onderbreken moet
de stekker uit het stopcontact worden getrokken.
Let er bij het plaatsen van dit product op dat het te gebruiken
stopcontact goed bereikbaar is.
• ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt, vilken detta
intyg avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och 93/68/EEC.
I
FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt skilja
produkten från nätet.
Vid installationen av produkten ska du se till att eluttaget den
ansluts till är nära utrustningen.
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
2 NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
CAUTION:
• Minimum distances around the apparatus for sufficient ventilation.
• The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc..
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• The use of apparatus in tropical and/or moderate climates.
•
•
•
•
•
•
•
• Keep the apparatus free from moisture, water, and dust.
• Halten Sie das Gerät von Feuchtigkeit, Wasser und
Staub fern.
Avoid high temperatures.
• Protéger l’appareil contre l’humidité, l’eau et
Allow for sufficient heat dispersion when installed in a
lapoussière.
rack.
• Tenete l’unità lontana dall’umidità, dall’acqua e dalla
Vermeiden Sie hohe Temperaturen.
polvere.
Beachten Sie, daß eine ausreichend Luftzirkulation • Mantenga el equipo libre de humedad, agua y polvo.
gewährleistet wird, wenn das Gerät auf ein Regal • Laat geen vochtigheid, water of stof in het apparaat
gestellt wird.
binnendringen.
Eviter des températures élevées
• Utsätt inte apparaten för fukt, vatten och damm.
Tenir compte d’une dispersion de chaleur suffisante
lors de l’installation sur une étagère.
Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata dispersione del
calore quando installate l’unità in un mobile per
componenti audio.
Evite altas temperaturas
Permite la suficiente dispersión del calor cuando está
instalado en la consola.
Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het apparaat • Unplug the power cord when not using the apparatus
for long periods of time.
op een rek wordt geplaatst.
• Wenn das Gerät eine längere Zeit nicht verwendet werden
Undvik höga temperaturer.
soll,
trennen Sie das Netzkabel vom Netzstecker.
Se till att det finns möjlighet till god värmeavledning vid
• Débrancher le cordon d’alimentation lorsque l’appareil
montering i ett rack.
n’est pas utilisé pendant de longues périodes.
• Disinnestate il filo di alimentazione quando avete
l’intenzione di non usare il filo di alimentazione per un
lungo periodo di tempo.
• Desconecte el cordón de energía cuando no utilice el
equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt wanneer
het apparaat gedurende een lange periode niet wordt
gebruikt.
• Koppla ur nätkabeln om apparaten inte kommer att
användas i lång tid.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie den Stecker
herausziehen.
• Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
• Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón de
energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer deze moet
worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
• Do not let foreign objects into the apparatus.
• Keine fremden Gegenstände in das Gerät kommen
lassen.
• Ne pas laisser des objets étrangers dans l’appareil.
• E’ importante che nessun oggetto è inserito all’interno
dell’unità.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit apparaat vallen.
• Se till att främmande föremål inte tränger in i
apparaten.
ACHTUNG:
• Die Belüftung sollte auf keinen Fall durch das Abdecken der Belüftungsöffnungen
durch Gegenstände wie beispielsweise Zeitungen, Tischtücher, Vorhänge o. Ä.
behindert werden.
• Auf dem Gerät sollten keinerlei direkten Feuerquellen wie beispielsweise
angezündete Kerzen aufgestellt werden.
• Bitte beachten Sie bei der Entsorgung der Batterien die geltenden
Umweltbestimmungen.
• Das Gerät sollte keinerlei Flüssigkeit, also keinem Tropfen oder Spritzen ausgesetzt
werden.
• Auf dem Gerät sollten keinerlei mit Flüssigkeit gefüllten Behälter wie beispielsweise
Vasen aufgestellt werden.
ATTENTION:
• La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation
avec des objets tels que journaux, rideaux, tissus, etc.
• Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil.
• Veillez à respecter l’environnement lorsque vous jetez les piles usagées.
• L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
• Aucun objet contenant du liquide, par exemple un vase, ne doit être placé sur
l’appareil.
• Do not let insecticides, benzene, and thinner come in
contact with the apparatus.
• Lassen Sie das Gerät nicht mit Insektiziden, Benzin
oder Verdünnungsmitteln in Berührung kommen.
• Ne pas mettre en contact des insecticides, du benzène
et un diluant avec l’appareil.
• Assicuratevvi che l’unità non venga in contatto con
insetticidi, benzolo o solventi.
• No permita el contacto de insecticidas, gasolina y
diluyentes con el equipo.
• Laat geen insektenverdelgende middelen, benzine of
verfverdunner met dit apparaat in kontakt komen.
• Se till att inte insektsmedel på spraybruk, bensen och
thinner kommer i kontakt med apparatens hölje.
PRECAUZIONI:
• Le aperture di ventilazione non devono essere ostruite coprendole con oggetti, quali
giornali, tovaglie, tende e così via.
• Non posizionare sull'apparecchiatura fiamme libere, come ad esempio le candele
accese.
• Prestare attenzione agli aspetti legati alla tutela dell'ambiente quando si smaltisce la
batteria.
• L'apparecchiatura non deve essere esposta a gocciolii o spruzzi.
• Non posizionare sull'apparecchiatura nessun oggetto contenete liquidi, come ad
esempio i vasi.
PRECAUCIÓN:
• La ventilación no debe quedar obstruida por hacerse cubierto las aperturas con objetos
como periódicos, manteles, cortinas, etc.
• No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como
velas encendidas.
• A la hora de deshacerse de las pilas, respete la normativa para el cuidado del medio
ambiente.
• No se expondrá el aparato al goteo o salpicaduras cuando se utilice.
• No se colocarán sobre el aparato objetos llenos de líquido, como jarros.
WAARSCHUWING:
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Die Belüftungsöffnungen dürfen nicht verdeckt
werden.
• Ne pas obstruer les trous d’aération.
• Non coprite i fori di ventilazione.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden beblokkeerd.
• Täpp inte till ventilationsöppningarna.
• Never disassemble or modify the apparatus in any way.
• Versuchen Sie niemals das Gerät auseinander zu
nehmen oder auf jegliche Art zu verändern.
• Ne jamais démonter ou modifier l’appareil d’une
manière ou d’une autre.
• Non smontate mai, nè modificate l’unità in nessun
modo.
• Nunca desarme o modifique el equipo de ninguna
manera.
• Nooit dit apparaat demonteren of op andere wijze
modifiëren.
• Ta inte isär apparaten och försök inte bygga om den.
II
• De ventilatie mag niet worden belemmerd door de ventilatieopeningen af te dekken
met bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
• Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het apparaat.
• Houd u steeds aan de milieuvoorschriften wanneer u gebruikte batterijen wegdoet.
• Stel het apparaat niet bloot aan druppels of spatten.
• Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het apparaat.
OBSERVERA:
• Ventilationen bör inte förhindras genom att täcka för ventilationsöppningarna med
föremål såsom tidningar, bordsdukar, gardiner osv.
• Inga blottade brandkällor, såsom tända ljus, bör placeras på apparaten.
• Tänk på miljöaspekterna när du bortskaffar batteri.
• Apparaten får inte utsättas för vätska.
• Inga objekt med vätskor, såsom vaser, får placeras på apparaten.
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
NEDERLANDS
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please dispose of any
materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with
the local regulations concerning chemical waste.
This product and the accessories packed together constitute the applicable product
according to the WEEE directive except batteries.
HINWEIS ZUM RECYCLING:
Das Verpackungsmaterial dieses Produktes ist für zum Recyceln geeignet und kann wieder verwendet
werden. Bitte entsorgen Sie alle Materialien entsprechend der örtlichen Recycling-Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte geben Sie die Batterien
gemäß örtlichen Bestimmungen an den Sammelstellen oder Sondermüllplätzen ab.
Dieses Produkt zusammen mit den Zubehörteilen ist das geltende Produkt der WEEE-Direktive, davon
ausgenommen sind die Batterien.
UNE REMARQUE CONCERNANT LE RECYCLAGE:
Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer de tout
matériau conformément aux réglements de recylage locaux.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations locales.
Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux réglements
locaux concernant les déchets chimiques.
Ce produit et les accessoires emballés ensemble sont des produits conformes à la directive DEEE sauf pour les piles.
NOTA RELATIVA AL RICICLAGGIO:
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente
alle normative locali sul riciclaggio.
Per smaltire l’unità, osservare la normativa in vigore nel luogo di utilizzo.
Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.
ACERCA DEL RECICLAJE:
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos
materiales siguiendo los reglamentos de reciclaje de su localidad.
Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su
localidad relacionados con los desperdicios químicos.
Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.
EEN AANTEKENING WAT BETREFT HET RECYCLEREN:
Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om
zich van elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften
betreffende chemisch afval worden verwijderd.
Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte
elektrische en elektronische apparaten (WEEE) van toepassing.
EN KOMMENTAR OM ÅTERVINNING:
Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala
återvinningsbestämmelser.
När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
Denna apparat och de tillbehör som levereras med den är de som uppfyller gällande WEEE-direktiv, med
undantag av batterierna.
III
SVENSKA
ENGLISH
Getting Started
Getting Started
Thank you for choosing the DENON AVR-2807 AV Surround Receiver. This remarkable component has been engineered to provide
superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction
of your favorite music sources.
As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you
review the contents of this manual before proceeding.
Contents
Getting Started
Accessories ··············································································3
Before using·············································································3
Cautions on installation ·························································3
About the remote control unit ··············································3
Inserting the batteries ····························································3
Operating range of the remote control unit ························3
Part names and functions
Front panel··············································································4
Display ····················································································4
Rear panel···············································································5
Remote control unit································································5
Easy Setup Procedure
Easy to setup flow ··································································6
Speaker layout [Basic layout] ················································6
Speaker connections ······························································7
Connecting a DVD player and monitor·································8
Auto Setup/Room Equalizer (Room EQ) Functions ············9
q Connecting a microphone··················································9
w Before performing the Auto Setup procedure·················10
e Perform the Auto Setup procedure ·································10
r Assigning power amplifiers ·············································10
t Switching the front speaker·············································10
y Preliminary measurements ··············································11
u Speaker measurements···················································11
i Checking and storing the measurement results··············12
Error messages ····································································12
Connecting Other Sources
Cable indications···································································13
The video conversion function ············································14
Relationship between the video input signal
and monitor output according to
the video convert settings··············································14, 15
The analog video to HDMI conversion function ················15
Connecting equipment with HDMI terminals
[To convert analog video signals to HDMI signals] ···········16
Connecting a TV tuner ·························································16
Connecting a DBS tuner·······················································16
Connecting the external inputs (EXT. IN) terminals··········17
Connecting a video camera or video game···························17
Connecting a CD player························································17
Connecting a turntable·························································17
Connecting a DVD recorder ·················································18
Connecting a VCR ·································································18
Connecting a tape deck························································18
Connecting a CD recorder or MD recorder·························19
Connecting equipment with HDMI terminals ····················19
Connecting the antenna terminals······································20
Connecting the iPod ····························································20
Connecting the RS-232C terminal ·······································20
Connecting the TRIGGER OUT jacks ··································21
Connecting the MULTI ZONE terminals
ZONE2 out connections ·······················································21
ZONE2 speaker out connections··········································21
Connecting the PRE OUT terminals ····································22
Connecting the power supply cord·····································22
Basic Operation
Playing the input source ······················································23
Selecting the room equalizer mode ····································24
Turning the sound off temporarily (MUTING) ·······················24
Listening over headphones ··················································24
Switching the front speakers ··············································24
Checking the currently playing program source, etc.···········24
Switching the brightness of the display ·······························24
1
ENGLISH
Using the surround modes
Types of surround modes and their features ·······················25
Selecting the play mode
(PURE DIRECT / DIRECT / STEREO)····································25
Selecting the Dolby Digital and DTS Surround mode
(only with digital input) ···················································26, 27
Selecting the Dolby Pro LogicIIx (Pro LogicII) mode ···········27
Selecting the DTS NEO:6 mode···········································28
Checking the input signals ···················································28
Surround modes and parameters ································29 ~ 31
Using the DENON original surround modes
Types of surround modes and their features ·······················32
Selecting the DSP surround simulation································33
Setting the tone control························································34
Adjusting the speaker volume··············································34
Using the fader function·······················································35
Listening to the radio
Auto tuning ···········································································35
Manual tuning·······································································35
Preset memory·····································································35
Checking the preset stations················································36
Recalling preset stations ······················································36
RDS (Radio Data System)·····················································36
RDS search···········································································37
PTY search············································································37
TP search··············································································37
RT (Radio Text) ·····································································37
Advanced Operation
Night mode············································································38
User mode function ······························································38
Combining the currently playing sound
with the desired image (VIDEO SELECT function) ············38
Personal memory plus function ··········································38
Playing the iPod ····································································39
Listening to music ································································39
Viewing still pictures and videos (only for iPods
equipped with the slideshow / video function) ····················39
Disconnecting the iPod·························································39
Multi zone music entertainment system
Multi-zone playback using the ZONE2 output terminals ······40
Multi-zone playback using the SPEAKER terminals ············40
Outputting a program source to amplifier, etc.,
in the ZONE2 room (ZONE2 SELECT mode) ·······················41
Remote control unit operations
during multi-source playback ················································41
Recording (audio and/or video)···········································42
About the memory functions ··············································42
Initialization of the microprocessor ····································42
ENGLISH
Getting Started
Advanced Setup – Part 1
System setup items and default values·····················43 ~ 45
Navigating through the System Setup Menu····················46
About the display··································································46
Audio Input Setup
Setting the Digital In Assignment·········································47
Setting the EXT. IN Subwoofer Level ··································47
Setting the iPod Assignment ···············································47
Setting the Input Function Level ··········································48
Setting the Function Rename···············································48
Setting the Tuner Presets···············································48, 49
Video Setup
Setting the HDMI In Assignment···································49, 50
Setting the Component In Assignment································50
Setting the Video Convert ····················································50
Setting the HDMI Out Setup················································51
Setting the Audio Delay························································51
Setting the On Screen Display (OSD) ··································52
Advanced Playback
Setting the 2ch Direct/Stereo···············································52
Setting the Dolby Digital Downmix Option Setup················53
Setting the Auto Surround Mode ·········································53
Setting the Manual Equalizer Setup ······························53, 54
Option Setup
Setting the Power Amplifier Assignment·····························54
Setting the Volume Control ··················································55
Setting the Trigger Out ·························································55
Setting the Setup Lock·························································56
Getting Started
Operating the remote control unit
Operating DENON audio components································62
Setting the preset memory function ··································62
Operating a component stored in the preset memory·····63
Setting the learning function···············································64
Using the system call function ············································64
Registering············································································64
Operating ··············································································64
Setting the punch through function ···································65
Resetting the remote control unit
Resetting the learning function ············································65
Resetting the punch through setting ··································65
Additional Information·················································66 ~ 68
Troubleshooting ····································································69
Specifications ········································································70
List of preset codes ····································End of this manual
Advanced Setup – Part 2
Speaker Setup
Setting the Speaker Configuration ·································56, 57
Setting the Subwoofer Setup···············································57
Setting the Distance·······················································57, 58
Setting the Channel Level ··············································58, 59
Setting the Crossover Frequency·········································59
Others Setup
Setting the Room Equalizer Setup ·······································60
Setting the Direct Mode Setup ············································60
Setting the MIC Input Select················································61
Check the parameter ····························································61
2
ENGLISH
ENGLISH
Getting Started
Getting Started
Accessories
Cautions on installation
Check that the following parts are attached in addition to the
main unit:
Note:
For heat dispersal, do not install this unit in a confined space
such as a bookcase or similar enclosure.
q Operating instructions ......................................................1
w Service station list.............................................................1
e Power supply cord (Approx. 1.5 m) ..................................1
r Remote control unit (RC-1030) .........................................1
t R6P/AA batteries ..............................................................3
y AM loop antenna ..............................................................1
u FM indoor antenna............................................................1
i Setup microphone (DM-S205) (Approx. 6 m) ...................1
e
r
Note
t
Wall
y
u
i
Notes on batteries:
• Replace the batteries with new ones if the set does not
operate even when the remote control unit is operated
nearby the unit. (The attached batteries are only for verifying
operation.)
• When inserting the batteries, be sure to do so in the proper
direction, following the “<” and “>” marks in the battery
compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose of
batteries in flames.
• Remove the batteries from the remote control unit when
you do not plan to use it for an extended period of time.
• If the battery fluid should leak, carefully wipe the fluid off the
inside of the battery compartment and insert new batteries.
• When replacing the batteries, have the new batteries ready
and insert them as quickly as possible.
Operating range of the remote control unit
Before using
Pay attention to the following before using this unit:
• Moving the unit
To prevent short-circuits or damaged wires in the connection
cables, always unplug the power supply cord and disconnect
the connection cables between all other audio components
when moving the unit.
• Before turning the power switch on
Check once again that all connections are correct and that there
are not problems with the connection cables. Always set the
power switch to the standby position before connecting and
disconnecting connection cables.
• Store these instructions in a safe place.
After reading, store this instructions along with the warranty
card in a safe place.
About the remote control unit
In addition to controlling the AVR-2807, the attached remote
control unit (RC-1030) can also be used to control the following
products:
q DENON component products
w Component products other than DENON:
• Set using the preset memory function (
page 62, 63).
• Set using the learning function (
page 64).
• Point the remote control unit at the remote sensor when
operating it.
• The remote control unit can be used from a distance of up to
about 7 meters, at a horizontal angle of up to 30° with respect
to the sensor.
30°
Inserting the batteries
q Remove the remote control w Set 3 R6P/AA batteries in
the battery compartment in
unit’s rear cover.
the indicated direction.
• Whenever the power switch is in the STANDBY state, the
unit is still connected to AC line voltage.
Please be sure to turn off the power switch or unplug the
cord when you leave home for, say, a vacation.
30°
Approx. 7 m
NOTE:
• It may be difficult to operate the remote control unit if the
remote sensor is exposed to direct sunlight or strong
artificial light.
• Note that the illustrations in these instructions may differ
from the actual unit for explanation purposes.
e Put the rear cover back on.
3
ENGLISH
ENGLISH
Getting Started
Getting Started
Part names and functions
Display
For details on the functions of these parts, refer to the pages given in parentheses ( ).
!4 !3 !2 !1
!0
o
iu
y
Front panel
!3 !2 !1
!4
!0
o
i
q w
!9
!5 !6
@[email protected]
@22 @
@1 @
@33 @4 @5 @6 @
@77 @8 @9 #0
q Input signal indicator
w Input signal channel indicator
!7 !8
• The audio channel(s) included in the input
signal light(s).
• This lights when the digital signal is inputted.
#6 #
#55 #4 #
#33 #2 #1
qw e
r
t
e Information display
r Output signal channel indicator
y u
The audio channels that can be output light.
t Speaker indicator
q Power ON/STANDBY button··············(10)
w Power indicator····································(10)
e Power switch········································(10)
r Headphones jack (PHONES) ···············(25)
t V.AUX INPUT terminals ······················(17)
y SETUP MIC jack ·····································(9)
u USER MODE buttons···························(38)
i MASTER VOLUME control knob ········(23)
o Master volume indicator
!0 Display
!1 MultEQ XT indicator ····························(24)
!2 NIGHT indicator ···································(38)
!3 Remote control sensor··························(3)
!4 FUNCTION knob···································(23)
!5 SOURCE button ···································(23)
!6 TUNING PRESET button ·····················(36)
!7 ZONE2/REC SELECT button ·········(41, 42)
!8 VIDEO SELECT button·························(38)
This lights corresponding to the settings of
the surround speakers of the various
surround modes.
!9 NIGHT button ·······································(38)
@0 PURE DIRECT button···························(25)
@1 DIRECT/STEREO button······················(25)
y Master volume indicator
@2 STANDARD button ······························(26)
@3 7CH STEREO button ····························(33)
@4 DSP SIMULATION button ···················(33)
@5 CH SELECT/ENTER button ···········(10, 34)
@6 SURROUND PARAMETER button ······(26)
@7 TONE DEFEAT button··························(34)
@8 DIMMER button ···································(24)
@9 STATUS button ····································(24)
#0 ROOM EQ button·································(24)
#1 SURROUND BACK button ··················(26)
#2 Cursor (D, H, F, G) buttons ···············(10)
This displays the volume level.
The Setup item number is displayed in
System Setup.
u MULTI (zone) indicator
ZONE2 mode is selected in ZONE2/REC
SELECT.
i REC indicator
REC OUT mode is selected in ZONE2/REC
SELECT.
#3 SYSTEM SETUP button ······················(10)
#4 EXT. IN button······································(23)
#5 ANALOG button···································(23)
#6 INPUT MODE button ···························(23)
4
ENGLISH
r t
e
o AL24 indicator
This lights when the following mode is
selected while inputting digital (PCM)
signals.
PURE DIRECT / DIRECT / STEREO /
MULTI CH PURE DIRECT /
MULTI CH DIRECT / MULTI CH IN
!0 Input mode indicator
!1 RDS indicator
This lights when an RDS broadcast has been
received.
!2 AUTO indicator
This lights when the broadcast station is
selected in the AUTO tuning mode.
!3 TUNED indicator
This lights when an FM/AM broadcast has
been received.
!4 STEREO indicator
This lights when an FM stereo broadcast has
been received.
ENGLISH
Getting Started
Getting Started
Rear panel
!5
Remote control unit
!4
!3
!2 !1
!0
o
To operate the AVR-2807, use the mode selector buttons to select “TAPE” “CDR/MD” or “CD”,
mode.
i
LEARNED/TX Indicator
····································(62)
Remote control signal
transmitter···················(3)
Power buttons
····································(10)
ZONE2 buttons
····································(41)
ZONE1 (MAIN) buttons
····································(41)
Mode selector buttons
····································(62)
Tuner system/System
buttons·······················(35)
!6
q w
e
rt
q DIGITAL terminals
(Optical/Coaxial) ·······································(8)
w AUDIO terminals ····································(8)
e PRE OUT terminals ······························(22)
r SIGNAL GND terminal·························(17)
t TRIGGER OUT jacks·····························(21)
y Speaker terminals··································(7)
u AC outlet···············································(22)
i AC inlet ·················································(22)
y
u
Function/Number
buttons·················(23, 63)
o COMPONENT VIDEO terminals ············(8)
!0 VIDEO/S-VIDEO terminals ····················(8)
!1 REMOTE CONTROL jacks····················(21)
!2 RS-232C terminal ·································(20)
!3 EXT. IN terminals ·································(17)
!4 HDMI MONITOR terminals··················(19)
!5 ANTENNA terminals····························(20)
!6 DOCK CONTROL jack ··························(20)
ROOM EQ button
····································(24)
NIGHT button
····································(38)
MODE SELECT button
····································(62)
System buttons
····································(63)
Surround buttons
····································(25)
Master volume control
buttons·······················(23)
SYSTEM SETUP/SETUP
button·························(10)
MUTING button
····································(24)
Cursor buttons
····································(10)
SURROUND PARAMETER
button·························(26)
ON SCREEN/DISPLAY
button···················(24, 63)
CH SELECT/ENTER
button···················(10, 34)
TEST TONE button
····································(56)
SEARCH/RETURN
button···················(37, 63)
SYSTEM CALL buttons
····································(64)
USE/LEARN button
····································(64)
FRONT SPEAKER button
····································(24)
INPUT MODE button
····································(23)
USER MODE buttons
····································(38)
5
ENGLISH
ENGLISH
Easy Setup Procedure
Speaker layout [Basic layout]
Easy Setup Procedure
Example of basic layout with 8 speakers and a monitor.
• This section contains the basic steps necessary to configure the AVR-2807 according to your
listening room environment and the source equipment and loudspeakers you are using.
• To set the sound field manually, see pages 56 ~59.
Subwoofer
Center speaker
Surround back speaker
Easy to setup flow
Auto setup flow
Placing the speakers.
Connecting a microphone.
Connecting the
speakers.
Preliminary measurement.
Connecting a monitor
and a DVD player.
1) Measuring the background noise (noise in the
room)
2) Determining whether or not speakers are
connected
3) Checking the polarities of the speakers
Starting the Auto
Setup.
Playing a DVD with
surround sound.
Front speaker
Set these at the sides of the
monitor or screen with their front
surfaces as flush with the front
of the screen as possible.
Measurement of the speakers
in the listening position.
1)
2)
3)
4)
5)
Speaker Configuration
Distance
Channel Level
Crossover Frequency
Room Equalizer
Speaker measurement check
and storage in memory.
6
ENGLISH
Surround speaker
ENGLISH
Easy Setup Procedure
Easy Setup Procedure
2 Connections
Speaker connections
Connect the speaker terminals with the
speakers making sure that like polarities are
matched (< with <, > with >).
NOTE:
When making connections, take care that
none of the individual conductors of the
speaker cable come in contact with
adjacent terminals, with other speaker
cable conductors, or with the rear panel
and screws.
NEVER touch the speaker terminals
when the power is on. Doing so could
result in electric shocks.
Connecting the speaker cables
1. Loosen by turning
counterclockwise.
Either tightly twist or terminate the
core wires.
2. Insert the cable.
3. Tighten by turning
clockwise.
• With the AVR-2807, up to 10 speakers can be connected for surround playback.
• When making connections, also refer to the operating instructions of the other components.
2 Speaker impedance
Speaker
Impedance
Front A, B
6 ~ 16 Ω/ohms
Front A+B
8 ~ 16 Ω/ohms
Subwoofer
Connection
terminal for
subwoofer
with built-in
amplifier.
Center
Surround
6 ~ 16 Ω/ohms
Surround back
Front speaker
(A)
Center speaker
(L)
>
>
IN
Front speaker
(B)
(R)
<
>
(L)
<
>
(R)
<
>
<
<
Note on speaker impedance
When using speakers with an impedance
below the designated value (for example 4
Ω/ohms), playing for long periods of time
with the volume high could cause the
temperature to rise, activating the protection
circuit.
When the protection circuit is activated, the
output to the speakers is cut off and the
power indicator blinks. If this happens,
unplug the power cord, wait for the set to
cool off and improve ventilation around the
unit. Also check the wiring of the input
cables and the speaker cables. After doing
this, plug the power cord back in and turn
the unit’s power back on.
If the protection circuit is activated again
even though there are no problems with the
wiring or the ventilation around the unit,
switch off the power and contact a DENON
service center.
(L)
>
(R)
<
>
(L)
<
Surround speaker
>
(R)
<
>
<
Surround back speaker
When using only one surround back
speaker, connect it to the left channel.
7
ENGLISH
ENGLISH
Easy Setup Procedure
Easy Setup Procedure
• For best picture quality (especially with progressive DVD and other high definition sources),
choose the component video or HDMI connection to your monitor. S-Video and composite video
outputs are also provided if your monitor does not have component video inputs.
Connecting a DVD player and monitor
• To connect the video output from the DVD player to the AVR-2807, you only need to choose one
connection type. For more information about the video up conversion function (
page 14, 15).
• To connect the digital audio output from the DVD player, you can choose from either the coaxial
or optical connections. If you choose to use the optical connection, it needs to be assigned. For
more information about Digital Input Assignment (
page 47).
Monitor
H
COMPONENT VIDEO IN
Y
PB
DVD player
H
PR
COMPONENT VIDEO OUT
G
S-VIDEO
IN
Y
PB
F
PR
VIDEO
IN
I
I
HDMI
OUT
HDMI
IN
F
VIDEO
OUT
G
S-VIDEO
OUT
A
• The AVR-2807 is equipped with HDMI terminals, so it can be connected to a DVD player or
monitor using an HDMI cable.
• The component video input and/or output terminals may be labelled differently on some monitors
or video components. Check the owner’s manuals for other components for further information.
• The COMPONENT MONITOR OUT-1 and the COMPONENT MONITOR OUT-2 can be used
simultaneously.
• Audio signals are only output from the HDMI monitor out terminal when audio signals are input
to the HDMI input terminal.
• When connecting the AVR-2807 and DVD player using an HDMI cable, also connect the AVR2807 and monitor using an HDMI cable (
page 19).
AUDIO OUT
L
L
L
R
R
R
D
OPTICAL
OUT
C
COAXIAL
OUT
Audio signal flow is shown with white arrows, video signal flow is shown with gray arrows.
• The AVR-2807 is equipped with another set of input terminals for a non-DVD video disc player
(such as laser disc, VCD/SVCD, or future high definition disc player). The above connection
guidelines for DVD also apply to the VDP input.
8
ENGLISH
ENGLISH
Easy Setup Procedure
<POWER>
Easy Setup Procedure
ENTER
<SETUP MIC>
SYSTEM SETUP
<ON/STANDBY>
DHFG
[OFF]
[ON]
Auto Setup/Room Equalizer (Room EQ) Functions
• The AVR-2807’s auto setup and room equalizer functions use
the attached microphone to measure the acoustic properties in
the room and automatically make the optimum settings.
• The optimum listening environment at all listening positions in
the home theater is achieved so multiple listeners can enjoy
listening at the same time.
As shown in Example q, as you make the measurements,
move the microphone successively to the different positions in
which the members of the family sit within the listening area
surrounded by the speakers. For best results, make the
measurements at 6 locations.
Even if the home theater is only used by a small number of
people, as in Example w, more effective equalization can be
achieved by taking the measurements in the area around the
listening position.
• When the auto setup procedure is performed, one of the
following 3 correction curves can be selected for the room
equalizer function.
Audyssey:
The frequency response of all the speakers is adjusted to
achieve the optimum environment for the room’s acoustics.
Front:
This adjusts the characteristics of each speaker to the
characteristics of the front speakers.
Flat:
This the frequency response of all speakers flat. This mode is
optimum for playing multi-channel signal music.
2 About the main listening position (*M)
The “main listening position” refers to either the center of the
listening position or the position in which the user sits when
using the system alone. The distance to the speakers is
measured from this position.
q Connecting a microphone
the attached
1 Connect
<SETUP MIC>.
setup microphone to
Sound receptor
the setup microphone on a camera tripod,
2 Mount
etc., and set with the receptor pointing towards
the ceiling.
• To make the sound field settings manually, see pages 56 ~ 59.
Microphone
Example: q
SYSTEM SETUP
DHFG
Example: w
ENTER
(
: Measurement positions)
*M
*M
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Place the setup microphone’s sound receptor at the height
of the ears in the listening position.
Be sure that at the beginning, the measurement is started
with the microphone set up at the main listening position.
It is not possible to measure properly if there are any
obstacles between the speakers and microphone. Check
that there are no obstacles.
NOTE:
• Once the settings are completed, disconnect the setup
microphone.
9
ENGLISH
ENGLISH
Easy Setup Procedure
w Before performing the Auto Setup
procedure
1 Turn on your subwoofer.
Set the volume to halfway and set the crossover frequency
to the maximum or Low pass filter off if your subwoofer can
adjust the output volume and the crossover frequency.
Some subwoofers have a standby mode. Be sure to turn
this function off before performing the Auto Setup
procedure.
2 Turn on your monitor.
3 Press <POWER>.
Easy Setup Procedure
e Perform the Auto Setup procedure
1
D H to select “Auto Setup / Room EQ”,
2 Press
then press ENTER.
Press SYSTEM SETUP.
3
Press D H to select “Auto Setup”, then press
ENTER.
The message “Connect Microphone” is displayed if no
microphone is connected. If so, connect the auto setup
microphone.
1
2
£ OFF:
The power turns off and the indicator is off.
The surround back output can be assigned to the “Front” or
“ZONE2” output.
Press D H to select “Power Amp Assign”, then press
F G to set.
Surround Back:
Assign to use as surround back speaker.
Front A, Front B:
Assign to use the “Front A” (or “Front B”) speakers with biamp connections.
ZONE2:
Assign to use as “ZONE2” speakers.
When assigned to “Front”, skip the surround back channel
measurement.
During the auto setup procedure, test tones are not output
to “ZONE2”.
¢ ON:
The power indicator lights red.
r Assigning power amplifiers
3
4 Press <ON/STANDBY> or [ON].
• The power indicator blinks green and the power turns on.
• “System Setup Menu” is not displayed when using
headphones.
t Switching the front speaker
Press D H to select “Front Sp”, then press F G to
select the speaker.
Front A
Front B
Front A+B
10
ENGLISH
ENGLISH
Easy Setup Procedure
Easy Setup Procedure
y Preliminary measurements
This procedure is used to automatically determine the
background noise, whether or not speakers are connected, and
the polarities of the connected speakers.
1 Press D H to select “Start”, then press F.
• The preliminary measurements start.
D H to select “Speaker Detect Check”, then
2 Press
press ENTER.
3
Cautions during measurements:
• Loud test tones are output during the measurements. Be
careful for example when small children are nearby.
• Proper measurements may not be possible if there are
obstacles between the speaker and the setup microphone.
• During the measurements, do not stand between or near
the speakers and setup microphone.
• To avoid influencing the measurements, turn off the power
of air-conditioners or any other equipment producing sound
in the room. Perform the measurements with the room as
quiet as possible.
• Measurement is cancelled when VOLUME is operated while
the Auto Setup is performed.
4 Press D H to select “Calculate”, then press F.
• The speaker is analyzed.
Once the calculations are completed, a screen for
confirming the results of the measurements appears.
The amount of time required for the analysis depends on the
number of speakers and the number of measuring points.
The greater the number of speakers and measuring points,
the longer the time required.
1
2
Press ENTER again.
1
u Speaker measurements
2
h
With these measurements, the “Speaker Configuration”,
“Distance”, “Channel Level”, “Crossover Frequency” and
“Room EQ” settings are analyzed automatically. The main
listening position is measured first, so leave the microphone
where it is.
(Screen after initial measurement)
h
(Press ENTER.)
h
4
1 Press D H to select “OK Start”, then press F.
• Measurements for the first point start.
2
Move the microphone to the second point and
press F.
h
h
• Measurements for the second point start.
(After measurement
completed)
Once the measurements are finished, the results of the
measurements for the second point are displayed.
3 Perform step 2 repeatedly.
Measurements can be ended when there are 6 or less
measurement locations; however, to obtain better results,
measurements at 6 locations is recommended.
• If the results are not as expected or if an error message is
displayed, select “Retry” and perform the measurements again
(
page 12).
• If the results of remeasurement are still not as expected or if an
error message is displayed, turn off the power switch and
check the speaker connections. Then start the measurements
again from the beginning.
11
ENGLISH
(After completion of
measurement for first point)
NOTE:
• Do not change the speaker connections or subwoofer
volume after making the measurements.
ENGLISH
Easy Setup Procedure
Easy Setup Procedure
i Checking and storing the measurement
results
The measurement results displayed at “u Speaker measurements”
can be checked and stored in the memory.
1 Press D H to select the item, then press ENTER.
Error messages
An error message is displayed if the measurements could not be completed automatically due to the speaker layout, the measuring
environment, etc. Please check the following matters, reset the pertinent items, and measure again.
Be sure to turn off the AVR-2807’s power before checking the speaker connections.
Example
Measures
Cause
q The speakers required for producing
reproduction have not been detected.
Press ENTER to switch to the second screen.
suitable • Check that the pertinent speakers are properly
connected.
If multiple errors occur, press F G to check the
contents.
After checking, press ENTER, then press D H to
2 set.
Store:
All the settings are stored in the memory.
w The speaker polarity is connected in reverse.
• Check the polarity of the pertinent speakers.
• For some speakers, the screen below may be
If multiple errors occur, press F G to check the
displayed even though the speakers are
contents.
properly connected.
If so, select “Skip0”.
Cancel:
Cancel the auto setup settings.
“Store” is selected:
3 When
Press F.
e There is too much ambient noise in the room and the • Either turn off the power of the device that
generated the noise during the measurements
measurements cannot be made accurately.
or move the device away.
• Try again at a time when it is quieter.
r The sound level that is output from the speakers and/or • Check the placement and orientation of the
loudspeakers.
subwoofer is too low.
• Adjust the subwoofer’s output level.
• After the data is stored, the “Auto Setup / Room EQ”
screen appears automatically.
1
2
t The measurement microphone is not connected, or all • Connect the attached setup microphone to
<SETUP MIC>.
of speakers have not been detected.
• Check the speaker connection.
• When measurements have been made using the measurement
microphone, speakers with a built-in filter such as subwoofers
might be set with a value that differs from the physical distance
because of the internal electrical delay.
NOTE:
• Do not turn off the power while the data is being stored.
12
ENGLISH
ENGLISH
Connecting Other Sources
NOTE:
• Do not plug in the power supply cord until all connections
have been completed.
• When making connections, also refer to the operating
instructions of the other components.
• Be sure to connect the left and right channels properly (left
with left, right with right).
• Do not bundle power cords together with speaker cables.
Doing so could result in humming or noise.
Connecting Other Sources
Cable indications
The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
Audio cable
A
Video cable
F
Analog terminal (Stereo)
(White)
L
L
(Red)
R
R
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
Pin-plug cable
B
Analog terminal (Monaural, for subwoofer)
Video terminal
G
S-Video terminal
S-Video cable
Pin-plug cable
H
C
Component video terminal
Digital terminal (Coaxial)
(Green)
(Y)
(Blue)
(Orange)
(PB/CB)
(Red)
Coaxial cable (75 Ω/ohms pin-plug cable)
(PR/CR)
Component video cable
D
Digital terminal (Optical)
Audio and Video cable
I
HDMI terminal
Optical cable (Optical fiber cable)
E
HDMI cable
Speaker terminal
Signal direction
Audio signal
Speaker cable
IN
OUT
OUT
IN
IN
OUT
OUT
IN
Video signal
13
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
The video conversion function
• Even if the formats of the video signals from the various players
differ, the different formats can be converted and the signals
output to the monitor from a single video output terminal. We
recommend outputting with the format offering the highest
quality video signals possible.
• With analog video signal connections, generally quality is higher
in the order shown below.
Relationship between the video input signal and monitor output according to the video
convert settings
Video convert
The flow of the video signals.
(HDMI terminal)
(Component Video
terminals)
(HDMI
terminal)
(Component Video
terminals)
ON
(S-Video terminal)
(S-Video terminal)
(Video terminal)
(Video terminal)
This unit’s input
terminals
This unit’s output
terminals
: only MAIN ZONE 480i/576i
Input signals
HDMI
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
C
C
C
C
C
C
C
COMPONENT
E
E
E
E
C (1080p)
C (480p ~ 720p)
C (480i/576i)
C (1080p)
C (480p ~ 720p)
C (480i/576i)
C (1080p)
C (480p ~ 720p)
C (480i/576i)
C (1080p)
C (480p ~ 720p)
C (480i/576i)
E
E
E
E
C (Other than 480i/576i)
C (480i/576i)
C (1080p)
C (480p ~ 720p)
C (480i/576i)
C (Other than 480i/576i)
C (480i/576i)
C (Other than 480i/576i)
C (480i/576i)
S-VIDEO
E
E
C
C
E
E
E
E
E
E
C
C
C
C
C
C
E
E
C
C
E
E
E
E
E
C
C
C
C
VIDEO
E
C
E
C
E
E
E
C
C
C
E
E
E
C
C
C
E
C
E
C
E
E
C
C
C
E
E
C
C
C : Signal input
E : No signal
480p ~ 720p : 480p/576p/1080i/720p
• The MAIN ZONE video conversion function is compatible with the
following format: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and
PAL-60.
• When SECAM signals of video input are up-converted, the signals are
output in PAL format from the S-Video terminal.
• When the input signal is a component 480p, 576p,1080i or 720p signal,
the signal up-converted to HDMI is output with that resolution.
• When the input signal is a video, S-Video or component 480i or 576i
signals, the signal up-converted to HDMI is output according to the
setting made at “i/p Convert” under “HDMI Out Setup” (
page 51).
• Signals up-converted to HDMI are output to the HDMI monitor with the
resolution at which they are input. Note that resolutions of 1080p are not
handled.
14
ENGLISH
HDMI
E
VIDEO
S-VIDEO
S-VIDEO
E
COMPONENT
COMPONENT
VIDEO
COMPONENT ✳1
COMPONENT ✳1
S-VIDEO
COMPONENT ✳2
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
COMPONENT ✳2
HDMI
HDMI ✳1
HDMI ✳2
HDMI ✳2
HDMI
HDMI
HDMI ✳1
HDMI ✳1
HDMI ✳1
HDMI ✳2
HDMI ✳2
HDMI ✳2
HDMI ✳2
E
✳1
MONITOR OUT
COMPONENT
S-VIDEO
E
E
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
E
COMPONENT
E
COMPONENT
COMPONENT
COMPONENT
COMPONENT ✳1
VIDEO
E
COMPONENT ✳1
✳3
COMPONENT ✳1
COMPONENT
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
E
E
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
E
COMPONENT
COMPONENT
COMPONENT
COMPONENT ✳1
VIDEO
E
COMPONENT ✳1
✳3
COMPONENT ✳1
COMPONENT
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
VIDEO
E
VIDEO
S-VIDEO
S-VIDEO
E
E
COMPONENT
VIDEO
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
E
VIDEO
S-VIDEO
S-VIDEO
E
COMPONENT
VIDEO
VIDEO
VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
: Not output
: On screen display superimposed on video signal and
output.
✳2
: On screen display superimposed on S-Video signal
and output.
✳3
: Video signals are output when the “Analog to HDMI
convert” is set to “OFF”.
COMPONENT : On screen display only displayed for SYSTEM SETUP,
SURROUND PARAMETER and ON SCREEN buttons.
HDMI
: The on screen display is displayed when the “Analog
to HDMI convert” is set to “ON”.
: Video signals are not output when the “Analog to
HDMI convert” is set to “OFF”.
ENGLISH
Connecting Other Sources
Video convert
S-VIDEO
MONITOR OUT
OFF
–
–
–
Used
Not used
–
–
–
Used
Not used
–
–
–
Used
Not used
–
–
–
Used
Not used
HDMI
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
C
C
C
C
Connecting Other Sources
Input signals
COMPONENT
S-VIDEO
E
E
E
E
C
E
C
E
C
E
C
E
E
C
C
C
C
C
C
C
E
E
E
E
E
C
E
C
E
C
C
E
C
E
C
C
C
C
C
C
C : Signal input
E : No signal
VIDEO
E
C
E
C
C
E
C
E
C
C
E
C
E
C
C
E
C
E
C
C
HDMI
E
E
E
E
E
E
E
E
E
E
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
MONITOR OUT
COMPONENT
S-VIDEO
E
E
E
E
E
S-VIDEO
E
S-VIDEO
E
–
E
COMPONENT
COMPONENT ✳1
E
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳1
–
E
E
E
E
E
S-VIDEO
E
S-VIDEO
E
–
E
COMPONENT
COMPONENT ✳1
E
COMPONENT ✳2
S-VIDEO
COMPONENT ✳2
S-VIDEO
COMPONENT ✳1
–
E
✳1
VIDEO
E
VIDEO
E
VIDEO
VIDEO
E
VIDEO
E
VIDEO
VIDEO
E
VIDEO
E
VIDEO
VIDEO
E
VIDEO
E
VIDEO
VIDEO
The analog video to HDMI conversion
function
✳2
✳2
✳2
✳2
: Not output
: On screen display superimposed on video
signal and output.
✳2
: On screen display superimposed on S-Video
signal and output.
COMPONENT : On screen display only displayed for SYSTEM
SETUP, SURROUND PARAMETER and ON SCREEN
buttons.
HDMI
: The on screen display is displayed when the
“Analog to HDMI convert” is set to “ON”.
• The AVR-2807’s video up-conversion function lets you output
analog video input signals (component – 480i/576i, 480p/576p,
1080i or 720p; S-Video and composite video – 480i/576i) to the
HDMI monitor output terminal.
• On the AVR-2807, it is possible to convert 480i/576i component
video, S-Video and composite video input signals to 480p/576p
format and output them from the HDMI monitor output
terminal.
• The resolutions with which the monitor is compatible can be
checked using the STATUS button on the main unit or the ON
SCREEN button on the remote control unit.
• It is not possible to down-convert from HDMI input signals to
the component, S-Video or composite video monitor output
terminals.
• If you do not want to use the function for converting analog
video signals to HDMI signals, select “OFF” for “Analog to
HDMI Convert” at “Setting the HDMI Out Setup”(
page
51).
• Video down conversion to the MAIN ZONE’s monitor output is
only possible when the component video input resolution is
480i (interlaced standard definition video – NTSC format, for
North America) or 576i (interlaced standard definition video –
PAL format, for Europe and other countries).
• To set the video conversion function for the MAIN ZONE to
“OFF” (
page 50).
2 On screen display for component video outputs
and HDMI output
• When viewing component video signals or HDMI signals via
the AVR-2807, the on screen display is displayed on the monitor
when the “System Setup” operations are performed and when
the remote control unit’s ON SCREEN button is operated.
• When only component video signals are input to the AVR-2807,
the characters of the on screen display are not displayed over
the picture.
15
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting equipment with HDMI terminals
[To convert analog video signals to HDMI signals]
Connecting a TV tuner
• For best picture quality choose the component video connection to your TV tuner. S-Video and
composite video outputs are also provided if your TV tuner does not have component video
inputs.
• To connect the digital audio output from the TV tuner, you can choose from either the coaxial or
the optical connections. If you choose to use the coaxial or the optical connection, it needs to be
assigned. For more information about Digital Input Assignment (
page 47).
• The AVR-2807 is equipped with a function for converting analog video signals into HDMI signals.
You can do this by either a component or a video or a S-Video connection.
• Audio signals are not output from the HDMI monitor output terminal, so also make analog or
digital audio connections. To play sound using digital audio connections, assign the digital terminal
(coaxial or optical) at “Setting the Digital In Assignment” (
page 47).
TV tuner
Monitor
I
H
HDMI
IN
COMPONENT VIDEO OUT
Y
PB
PR
DVD player
H
G
COMPONENT VIDEO OUT
S-VIDEO
OUT
Y
PB
F
PR
VIDEO
OUT
F
A
VIDEO
OUT
G
AUDIO OUT
L
L
L
R
R
R
S-VIDEO
OUT
D
Connecting a DBS tuner
OPTICAL
OUT
• For best picture quality choose the component video connection to your DBS tuner. S-Video and
composite video outputs are also provided.
• To connect the digital audio output from the DBS tuner, you can choose from either the coaxial
or optical connections. If you choose to use the coaxial connection, it needs to be assigned. For
more information about Digital Input Assignment (
page 47).
C
COAXIAL
OUT
A
AUDIO OUT
L
L
L
R
R
R
DBS / BS Tuner
H
COMPONENT VIDEO OUT
Y
PB
PR
• When “OFF” is set at “i/p Convert” under “Setting the HDMI Out Setup”, use a monitor
compatible with input resolutions of 480i/576i.
• If your monitor is not equipped with an HDMI terminal, connect the AVR-2807 to the monitor
using the component video, S-Video, or composite video terminals.
G
S-VIDEO
OUT
F
VIDEO
OUT
A
AUDIO OUT
L
L
L
R
R
R
D
OPTICAL
OUT
16
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting the external inputs (EXT. IN) terminals
Connecting a CD player
To connect the digital audio output from the CD player, you can choose from either the coaxial or
optical connections. If you choose to use the optical connection, it needs to be assigned. For more
information about Digital Input Assignment (
page 47).
• These terminals are for inputting multi-channel audio signals from an outboard decoder, or a
component with a different type of multi-channel decoder, such as a DVD-Audio player, or a multichannel Super Audio CD player, or other future multi-channel sound format decoder.
• The video signal connection is the same as that for a DVD player (
page 8).
• For instructions on playback using the external input (EXT. IN) terminals (
page 23).
CD player
A
L
R
L
L
L
R
R
R
D
7.1ch AUDIO OUT
FRONT
L
L
R
AUDIO OUT
A
DVD Audio-Video /
Super Audio CD Player /
External decoder
OPTICAL
OUT
R
C
COAXIAL
OUT
B
CENTER
A
L
L
R
R
A
SURROUND
BACK
L
R
L
L
SURROUND
L
R
R
R
Connecting a turntable
Turntable
(MM cartridge)
B
SUBWOOFER
A
• With discs on which special copyright protection measures have been taken, however, the digital
signals may not be output from the DVD player. In this case, connect the DVD player’s analog
multi-channel output to the AVR-2807’s EXT. IN terminals for playback. Also refer to your DVD
player’s operating instructions.
L
AUDIO OUT
R
GND
Connecting a video camera or video game
F
• The phono input can accept signals from moving magnet (MM) and high output moving coil (MC)
phono cartridges. If your turntable is equipped with a low output MC cartridge, you will need to
use a separate MC head amplifier or step-up MC transformer.
Video camera /
Video game
VIDEO
OUT
A
NOTE:
• If humming or other noise is generated when the ground wire is connected to the SIGNAL
GND terminal, disconnect the ground wire.
AUDIO OUT
L
L
L
R
R
R
D
OPTICAL
OUT
G
S-VIDEO
OUT
17
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting a DVD recorder
Connecting a VCR
• For best picture quality choose the component video connection to your DVD recorder. S-Video
and composite video outputs are also provided. If you choose to use the component video
connection, it needs to be assigned. For more information about Component Input Assignment
(
page 50).
• If you wish to perform analog dubbing from a digital sources, such as a DVD recorder to an analog
recorder such as a cassette deck, you will needs connect the analog inputs and outputs as shown
below, in addition to the digital audio connections.
There are 2 sets of video deck (VCR) terminals, so 2 video decks can be connected for
simultaneous recording or video copying.
Video deck
F
VIDEO
OUT
G
S-VIDEO
OUT
DVD recorder
H
G
COMPONENT VIDEO OUT
S-VIDEO
IN
Y
PB
F
PR
VIDEO
IN
G
S-VIDEO
OUT
A
G
S-VIDEO
IN
AUDIO IN
L
L
L
R
R
R
A
F
VIDEO
IN
AUDIO OUT
L
L
L
R
R
R
F
VIDEO
OUT
A
AUDIO OUT
L
L
R
R
A
• When recording to a VCR, it is necessary that the type of cable used with the playback source
equipment be the same type that is connected to the AVR-2807 VCR-1 (to 2) OUTPUT terminal.
Example: VCR-2 IN → S-Video cable : VCR-2 OUT → S-Video cable
VCR-2 IN → Video cable : VCR-2 OUT → Video cable
L
R
AUDIO IN
L
L
L
R
R
R
D
Connecting a tape deck
OPTICAL
OUT
D
Tape deck
OPTICAL
IN
AUDIO OUT
A
L
L
R
R
AUDIO IN
A
• When recording to a DVD recorder, it is necessary that the type of cable used with the playback
source equipment be the same type that is connected to the AVR-2807 VCR-1 (to 2) OUTPUT
terminal.
Example: VCR-1 IN → S-Video cable : VCR-1 OUT → S-Video cable
VCR-1 IN → Video cable : VCR-1 OUT → Video cable
NOTE:
• Do not connect the output of the component connected to the OPTICAL 3 OUT terminal on
the AVR-2807’s rear panel to any terminal other than the OPTICAL 3 IN terminal.
18
ENGLISH
L
R
L
L
L
R
R
R
ENGLISH
Connecting Other Sources
Connecting Other Sources
Input signals
LINEAR PCM
Dolby Digital
DVD-Video
DTS
LINEAR PCM
PACKED PCM
DVD-Audio
(with CPPM /
without CPPM)
CD
LINEAR PCM
Multi area
Super Audio
Stereo area
CD
CD area
Connecting a CD recorder or MD recorder
If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an
analog recorder such as a cassette deck, you will need to connect the analog inputs and outputs
as shown below, in addition to the digital audio connections.
CD recorder /
MD recorder
AUDIO OUT
A
L
L
R
R
L
R
AUDIO IN
A
L
L
L
R
R
R
2 Copyright Protection System
C
C
C
C
C
E
E
C
To play back the digital video and audio of DVDVideo and DVD-Audio through an HDMI/DVI-D
connection, both the connected player and
monitor are required to support a copyright
protection system called HDCP (Highbandwidth Digital Content Protection System).
HDCP is copy protection technology that
comprises data encryption and authentication
of the partner equipment.
The AVR-2807 supports HDCP. Please see the
user’s manual of your video display for more
information about this.
The AVR-2807 is HDMI Ver. 1.1 compatible.
D
OPTICAL
OUT
• If your digital monitor or DVD player only supports DVI-D, please obtain and use an HDMI-DVI
conversion cable or adaptor, available from your dealer.
D
OPTICAL
IN
NOTE:
• The audio signals on the multi/stereo area of Super Audio CDs are not output. If the Super
Audio CD is a hybrid CD, only the audio signals in the CD area are output.
• Use a compatible player to play DVD-Audio discs that are copyright protected by CPPM.
• Among the devices that support HDMI, some devices can control other devices via the HDMI
terminal; however, the AVR-2807 cannot be controlled by another device via the HDMI
terminal.
• The audio signals from the HDMI terminal (including the sampling frequency and bit length)
may be limited by the equipment that is connected.
• The video signals are not output properly if a device not compatible with HDCP is used.
• When “OFF” is set at “i/p Convert” under “Setting the HDMI Out Setup”, use a monitor
compatible with input resolutions of 480i/576i.
• The video signals input from the HDMI input terminals are output to the HDMI monitor with
their original resolution, so the image will not be displayed if the resolutions of the input signal
and the monitor being used are not matched. In this case, change the setting of the resolution
on the source device (player) to one which the monitor can handle.
• For stable signal transfer, we recommend using cables that are a maximum of 5 meters in
length.
NOTE:
• Do not connect the output of the component connected to the OPTICAL 4 OUT terminal on
the AVR-2807’s rear panel to any terminal other than the OPTICAL 4 IN terminal.
Connecting equipment with HDMI terminals
• A simple 1-cable connection (using a commercially available cable) with a device having an HDMI
(High-Definition Multimedia Interface) terminal allows digital transfer of the digital images of DVDVideo and other sources, and the multi-channel sound of DVD-Audio and DVD-Video.
• To provide audio output from AVR-2807’s audio output terminal, select “Amp” at the “HDMI In
Assign”.
To provide audio output from the TV, select “TV” at the “HDMI In Assign” (
page 49, 50).
Monitor
2 Connections with an HDMI/DVI-D conversion cable (adapter)
I
HDMI
IN
• The HDMI video stream signals (video signals) are theoretically compatible with DVI-D. When
connecting to a monitor, etc., equipped with DVI-D terminals, it is possible to connect using an
HDMI/DVI-D conversion cable, but depending on the combination of devices used the image
might not be output.
• When using an HDMI/DVI-D conversion adapter, the image may not be output properly due to
poor contact with the connected cable, etc..
DVD player
I
HDMI
OUT
19
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting the antenna terminals
Connecting the
When using an iPod, you must connect the DENON original iPod Dock and the DOCK CONTROL
jack on the AVR-2807 with a mini-jack and assign the iPod to any AUDIO and/or S-VIDEO
terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the VDP
terminal.
An FM antenna cable plug can be connected directly.
AM loop antenna
(Supplied)
Direction of broadcasting station
iPod®
FM antenna
For instructions on assigning the iPod to a specific terminal, see
“Setting the iPod Assignment” (
page 47).
For instructions on playing the iPod, see “Playing the iPod” (
page 39).
iPod
75 Ω/ohms
Coaxial cable
ASD-1R
FM indoor antenna
(Supplied)
A
R
L
R
L
AUDIO OUT
G
S-VIDEO OUT
AM outdoor antenna
Ground
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1
2
Remove the vinyl tie
and take out the
connection line.
• The optional standard iPod Dock is DENON ASD-1R sold separately.
Connection of AM antennas
1. Push the
lever.
2. Insert the
conductor.
3. Return the
lever.
Connecting the RS-232C terminal
3
Bend in the reverse
direction.
4
a. With the antenna
on top any stable
surface.
Mount
This is a control expansion terminal for
factory use only. Consult you dealer for
details.
NOTE:
• Do not connect 2 FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.
Perform the following operation before
using an external controller connected to
the RS-232C terminal:
1. Press the ON/STANDBY button on the
main unit and set the unit to the
operating mode.
2. Perform the operation to turn off the
power from the external control.
3. Check that the product has been set
to the standby mode.
After checking the above, check the
connections of the external controller.
Operation is possible.
b. With the antenna
attached to a wall.
Installation hole Mount on wall, etc.
20
ENGLISH
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting the TRIGGER OUT jacks
ZONE2 speaker out connections
• When the surround back’s power amplifier is assigned to the ZONE2 output channel at “Power
Amp Assign” in the “System Setup Menu”, the surround back speaker terminals can be used
as the ZONE2 speaker out terminals (
page 54).
• The connections diagram below is an example for when the surround back speaker is assigned
to the ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
Turn the DC 12 V voltage on and off for
the individual functions and surround
modes.
For details, see “Setting the Trigger Out”
(
page 55).
Subwoofer
Connection
terminal for
subwoofer
with built-in
amplifier.
(L)
>
>
IN
Connecting the MULTI ZONE terminals
For instructions on operations using the MULTI ZONE functions (
Front speaker
(A)
Center speaker
(R)
<
>
(L)
<
<
page 40, 41).
ZONE2 out connections
• If another pre-main (integrated) amplifier is connected, the ZONE2 out (fixed level) terminals can
be used to play a different program source in ZONE2 the same time (
page 40).
Input
+
Output
+
AUX OUT
Infrared retransmitter
Extension terminal
for future use.
Infrared
sensor
Monitor
(ZONE2)
G
S-VIDEO
IN
F
(L)
VIDEO
IN
>
A
Premain amplifier
(ZONE2)
L
L
L
R
R
R
(R)
<
>
(L)
<
Surround speaker
>
(R)
<
>
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no
humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’
operating instructions.
21
ENGLISH
<
ZONE2 Front speaker
ZONE2
IN
Front speaker
(B)
>
(R)
<
>
<
ENGLISH
Connecting Other Sources
Connecting Other Sources
Connecting the PRE OUT terminals
Connecting the power supply cord
• Use these terminals if you wish to connect external power amplifier(s) to increase the power of
the front, center, surround and surround back sound channels, or for connection to powered
loudspeakers.
• When using only one surround back speaker, connect it to the left channel.
Power supply cord
(Supplied)
AC outlet
(wall)
AC 230 V, 50 Hz
Power amplifier
B
CENTER
A
SURROUND
BACK
L
L
L
R
R
R
L
L
SURROUND
L
R
R
R
A
NOTE:
• Insert the plugs securely. Incomplete
connections will result in the generation of
noise.
• Only use the AC OUTLET for audio
equipment. Never use it for hair driers,
monitors or other electrical appliances.
B
SUBWOOFER
A
L
L
FRONT
L
R
R
R
22
ENGLISH
AC OUTLET
• SWITCHED (total capacity – 100 W (0.43 A))
The power to the outlet is turned on and
off in conjunction with the POWER switch
on the main unit, and when the power is
switched between on and standby from
the remote control unit.
No power is supplied from this outlet
when this unit’s power is at standby. Never
connect equipment whose total power
consumption exceeds 100 W (0.43 A).
ENGLISH
Basic Operation
Basic Operation
FUNCTION
Playing the input source
SURROUND
PARAMETER
1
4 Use VOLUME to adjust the volume.
Use FUNCTION to select the input source you
want to play.
To select the input source when ZONE2/REC SELECT,
VIDEO SELECT or TUNING PRESET is selected, press
<SOURCE> then operate <FUNCTION>.
2 Press INPUT MODE.
AUTO
<SOURCE> INPUT MODE <EXT.IN>
<ANALOG>
VOLUME
PCM
EXT. IN
DTS
ANALOG
Press <ANALOG> to select “ANALOG”, <EXT. IN> to select
“EXT. IN”.
AUTO (All auto mode):
The type of input signal is detected and the AVR-2807’s
surround mode is switched automatically. Can be selected for
sources for which the “Digital In Assign” (
page 47) is
made.
The mode switches automatically to DTS/ Dolby Digital/ PCM.
The input switches to the analog input terminals is no digital
signals are being input.
FUNCTION
PCM (exclusive PCM signal playback mode) and
DTS (exclusive DTS signal playback mode):
Played when the various signals are input. Noise may be
generated when a mode different from the input signal is set.
VOLUME
SURROUND
PARAMETER
INPUT MODE
ANALOG (exclusive analog audio signal playback mode) and
EXT. IN (External decoder input terminal selection mode):
The signals input to the various input terminals are played.
To lower the subwoofer channel level in the EXT. IN mode,
press SURROUND PARAMETER and select “SW. ATT”.
For some players the playback level of the SW channel may
seen strong. If so, set to “ON”.
3 Start playback on the selected component.
For operating instructions, refer to the component’s manual.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
23
ENGLISH
• The volume level is displayed on the master volume level
display.
The volume can be adjusted between the range of –80 ~ 0
~ 18 dB. Depending on the channel level settings and the
different surround mode settings and when in the down-mix
mode, it may not be possible to adjust the volume to 18 dB.
• Canceling the EXT. IN mode:
Press INPUT MODE, <ANALOG> or <EXT. IN> to switch to the
desired input mode.
• To use the EXT. IN mode together with a picture, select the input
source to which the video signal is connected first, then set the
input mode.
• The “DIG.” indicator lights when digital signals are being input
properly. If the “DIG.” indicator does not light, check whether
the “Digital In Assign” (
page 47) and connections are
correct.
NOTE:
• When the input mode is set to the external input (EXT. IN),
the surround mode cannot be set.
• In play modes other than the external input mode, the
signals connected to these terminals cannot be played.
Cautions when playing DTS sources:
• For DTS sources, be sure to connect the device to the digital
input terminal and set “AUTO” or “DTS” for the input
source. Noise will be generated if you play in the ANALOG
or PCM mode.
• When playing DTS signals in the “AUTO” mode, noise may
be generated when you first start playing and during
searching. If so, play in the “DTS” mode.
ENGLISH
Basic Operation
Basic Operation
<STATUS>
PURE DIRECT <DIMMER>
ROOM EQ
Selecting the room equalizer mode
The room equalizer function offers 3 correction curves:
“Audyssey”, “Front” and “Flat”. These modes can be selected
after performing the auto setup procedure.
Switching the front speakers
Press [SPEAKER].
FRONT A
Press ROOM EQ.
OFF
Audyssey
Front
Flat
Manual
• The “MultEQ XT” indicator lights green when “Audyssey” is
selected, red when “Front” or “Flat” is selected.
DIRECT/STEREO
<PHONES>
SURROUND
PARAMETER
FRONT B
FRONT A+B
The indicator lights red if the speaker settings are changed
after the auto setup measurements have been made (
page 56 ~ 59).
Checking the currently playing program
source, etc.
2 On screen display
Press [ON SCREEN].
Audyssey, Front, Flat:
See page 60.
Manual:
Selects the setting value that was set in the Manual Equalizer
Setup (
page 53, 54).
• The current program source and various settings are
displayed on the monitor screen.
2 Front panel display
Press <STATUS>.
Turning the sound off temporarily (MUTING)
• The current program source and various settings are indicated
on the display.
Press [MUTING].
ROOM EQ
DIRECT/STEREO
You can adjust the muting level (
page 55).
PURE DIRECT
[MUTING]
SURROUND
PARAMETER
Press <DIMMER>.
• Canceling MUTING mode:
To cancel the muting mode, either press [MUTING] or adjust the
volume.
[ON SCREEN]
[SPEAKER]
Listening over headphones
Connect the headphones to <PHONES>.
• No sound is produced from the speakers automatically.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Switching the brightness of the display
NOTE:
• To prevent hearing loss, be careful not to raise the volume
level excessively when using headphones.
24
ENGLISH
The brightness of the display can be adjusted in 3 steps. The
display can also be turned off.
ENGLISH
Basic Operation
Using the surround modes
Types of surround modes and their features
The AVR-2807 is equipped with many surround modes. We
recommend using the surround modes as described below in
order to achieve the maximum effect for the specific signal
source.
is a 6.1-channel/7.1-channel surround mode.
Sources recorded in Dolby Digital EX
DOLBY DIGITAL EX / +PLIIx*
(
page 26)
• This mode is optimized for playing sources recorded in
Dolby Digital EX.
Sources recorded in DTS-ES
DTS-ES DSCRT 6.1 / MTRX 6.1, +PLIIx*
(
page 26)
• This is the optimum mode for playing sources
recorded in DTS-ES.
Dolby Digital or DTS Surround (5.1 ch sources)
2 ch sources recorded in Dolby Surround
WIDE SCREEN
(
page 32, 33)
• Effective for 2-channel sources recorded in Dolby
Surround or for 7.1-channel playback with 5.1-channel
sources.
DOLBY DIGITAL / DOLBY DIGITAL+PLIIx* /
DTS SURROUND / DTS 96/24 / DTS+PLIIx* /
DTS+NEO:6
(
page 26)
• This mode is optimized for playing 5.1-channel or 7.1channel music.
• For Dolby Surround recording sources, Dolby Pro
LogicII playback is conducted.
Basic Operation
Sources recorded in stereo
Sources recorded in monaural
PURE DIRECT
• Use this mode to play analog input music sources with
extremely high quality.
DIRECT / STEREO
• Effective for achieving pure playback.
• If there is no need for tone control or distribution of
the low frequencies in function of the speaker
configuration, select the DIRECT mode to achieve the
best sound quality.
DENON Original Surround Modes (
page 32, 33)
• Select these for 7.1-channel playback with sources
recorded in stereo or monaural.
• The effects are different for each of the surround
modes. Select the one most suited for the source
being used.
DTS NEO:6
(
page 28)
• This is a surround mode for playing 6.1- or 7.1-channel
stereo sources developed by Digital Theater Systems.
• One of 2 playing modes, MUSIC (for music sources)
or CINEMA (for movie sources), can be selected
according to your preferences.
DOLBY PRO LOGICIIx*
(
page 27)
• Developed by Dolby Laboratories, this surround mode
provides 7.1-channel surround sound with
conventional stereo (2-channel) sources.
• Select CINEMA mode for movie surround
soundtracks, MUSIC for music sources, and GAME
for 2-channel game box audio sources.
• Surround modes marked with an asterisk (*) cannot be used
when the surround back speaker is set to “NONE”.
• The “+PLIIx Cinema” mode cannot be selected when only one
surround back speaker is being used.
25
ENGLISH
Selecting the play mode
(PURE DIRECT / DIRECT / STEREO)
The AVR-2807 is equipped with 3 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
2 PURE DIRECT mode
This mode reproduces the sound with extremely high quality.
The audio signals do not pass through the tone circuits, etc., and
the display and surrounding circuits that could affect the audio
signals are turned “OFF”.
Press PURE DIRECT.
2 DIRECT mode
This mode is for playing with high quality sound. The audio
signals are transmitted directly, without passing through the tone
circuits, etc.
Press DIRECT/STEREO to select “DIRECT”.
DIRECT
STEREO
When press SURROUND PARAMETER:
The subwoofer output can be controlled directly.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
Press DIRECT/STEREO to select “STEREO”.
• The system setup function cannot be used when the PURE
DIRECT mode is set. To use the system setup function, cancel
the PURE DIRECT mode.
• If the HDMI input terminal is selected, video outputs are output
in the PURE DIRECT mode.
• The channel level and surround parameters in the PURE
DIRECT mode are the same as in the DIRECT mode.
ENGLISH
Basic Operation
Basic Operation
ENTER SURROUND <STATUS>
STANDARD
PARAMETER
Selecting the Dolby Digital and DTS
Surround mode (only with digital input)
an input source for which digital (COAXIAL,
1 Select
OPTICAL etc.) is set (
page 47 or 49 ~ 50).
<SURROUND BACK>
INPUT MODE
DHFG
2 Press INPUT MODE to select “AUTO”.
3 Press STANDARD to select “STANDARD”.
a program source with the
,
4 Play
mark.
•“
” or “
” lights, depending on the source.
5 Press SURROUND PARAMETER.
The surround back channel can be switched on and off using
<SURROUND BACK>.
Press D H to select the item, then press F G to
6 set.
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble
sound.
Effective source / mode
Dolby Pro LogicIIx / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6 / WIDE SCREEN
STANDARD
DHFG
SURROUND
PARAMETER
ENTER
INPUT MODE
D.COMP.:
The dynamic range is compressed. Select one of 4 modes:
“OFF”, “LOW”, “MID” (middle) or “HI” (high).
Effective source / mode
Dolby Digital /
DTS (For DTS sources, only displayed for compatible
software.)
LFE:
To play the various types of software properly, we
recommend setting to the values shown below.
• To play Dolby Digital software: “0 dB”
• To play DTS movie software: “0 dB”
• To play DTS music software: “–10 dB”
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes.
(Adjusted together for the Dolby/DTS SURROUND
modes.)
SB CH OUT:
Select the play mode or surround back channel playback
method.
(1) For multi-channel sources
• SB OFF (OFF):
Not played.
• NON MTRX:
Surround channel signal played.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources
played.
• PLIIx CINEMA:
Decoded in Dolby Pro LogicIIx Cinema mode, surround back
signal played.
Set the surround back speaker to “2spkrs” at “Speaker
Configuration” (
page 56, 57)
• PLIIx MUSIC:
Decoded in Dolby Pro LogicIIx Music mode, surround back
signal played.
Set the surround back speaker to “1spkr” or “2spkrs” at
“Speaker Configuration” (
page 56, 57)
(2) For 2-channel sources
• OFF: Not played.
• ON: Surround channel signal played.
Can also be operated using <SURROUND BACK>.
5
Example: Dolby Digital
26
ENGLISH
Example: DTS
ENGLISH
Basic Operation
Basic Operation
AFDM (Auto Flag Detect Mode):
• ON:
When software including Dolby Digital EX or DTS-ES 6.1channel identification signals is played, 6.1-channel playback
is performed automatically. The surround mode is set
according to the program source being played. The “SB CH
OUT” parameter on the surround parameters screen cannot
be selected.
• OFF:
Not detected automatically. The surround mode can be
selected freely.
Example: When playing Dolby Digital software (with EX flag)
q When “AFDM” is “ON”, the “DOLBY DIGITAL + PLIIx
CINEMA” mode is set automatically.
w To play in the Dolby Digital EX mode, set “AFDM” to “OFF”
and select “MTRX ON” at “SB CH OUT”.
Selecting the Dolby Pro LogicIIx (Pro LogicII)
mode
It is possible to play analog input signals and digital input signals
(2-channels) in the surround mode.
This mode is optimal for playing program sources recorded in
Dolby Surround.
1
Press STANDARD to select “DOLBY PLIIx”.
DOLBY PLIIx
DTS NEO:6
2 Play a program source.
3 Press SURROUND PARAMETER.
4 Press F G to select the play mode.
CINEMA:
This mode is suited for playing movie sources recorded in
Dolby Surround and general sources recorded in stereo.
Example: q
Example: w
Some discs recorded in Dolby Digital EX do not include EX
flag. If the playing mode does not switch automatically
when the AFDM turns “ON” during playback, manually set
“SB CH OUT” to “PLIIx Cinema” or “MTRX ON”.
7 Press ENTER or SURROUND PARAMETER.
• Select “Default Yes” and press F to reset all the settings.
2 Dialog normalization function
This operates automatically when playing Dolby Digital sources.
This is a function for automatically correcting the standard signal
level for different program sources. The correction value can be
checked by pressing <STATUS>.
MUSIC:
This mode is suited for playing stereo music signals in the
surround mode. With music signals, the sound field
expansion differs according to the type of music, the
recording conditions (live/studio), etc.. Because of this, the
MUSIC mode offers a number of optional parameters for
further adjusting the sound field.
GAME:
This mode is optimum for games. The GAME mode can only
be used for 2-channel audio sources.
PL:
This mode is compatible with conventional Dolby Pro Logic
sources.
“MUSIC” is selected:
5 When
Press D H to select the item, then press F G to
set.
PANORAMA:
This is effective when the surround effect seems weak.
DIMENSION:
This shifts the center of the sound field image to the front or
surround side. This compensates for when the sound field
image seems unbalanced. (0 to 6, default : 3)
CENTER WIDTH:
A natural expansion to the front can be achieved by adjusting
the center signal’s output balance between the center and
front channels. (0 to 7, default : 3)
6 Press ENTER or SURROUND PARAMETER.
3
4
5
(When “MUSIC” is selected)
h
Optional parameters can only be set in the MUSIC mode.
Select “OPTIONS”, then press F.
Press ENTER to return to the previous screen.
(When “OPTIONS” is selected)
Dial.Norm
Offset
-4dB
The numbers are the correction value when corrected
to the standard level.
27
ENGLISH
ENGLISH
Basic Operation
Basic Operation
ENTER SURROUND
STANDARD
PARAMETER
Selecting the DTS NEO:6 mode
It is possible to play analog input signals and digital input signals
(2-channels) in the surround mode.
1 Press STANDARD to select “DTS NEO:6”.
DOLBY PLIIx
DTS NEO:6
2 Play a program source.
3 Press SURROUND PARAMETER.
4 Press F G to select the play mode.
DHFG
CINEMA:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
MUSIC:
This mode is suited mainly for playing music.
5
STANDARD
DHFG
[ON SCREEN]
ENTER
1 Press [ON SCREEN].
Room EQ:
Displays the type of equalizer currently set.
SIGNAL:
Displays the type of input signal.
fs:
Displays the input signal’s sampling frequency.
FORMAT:
Displays the input signal’s number of channels (front /
surround / LFE on/off).
“SURROUND” is displayed for 2-channel signal sources
recorded in Dolby Surround.
OFFSET:
Displays the dialog normalization offset value.
FLAG:
“MATRIX” is displayed if the input signal has undergone
matrix processing, “DISCRETE” is displayed if the input signal
has undergone discrete processing.
2 Press [ON SCREEN] again.
• OSD-1
OSD-2
OSD-3
OSD-4
OSD-5 ~ 7
OSD-8 ~ 14
When “MUSIC” is selected:
Press D H to select “CNTR. IMAGE” , then press
F G to set.
CNTR. IMAGE:
The expansion of the center channel can be adjusted. (0.0 to
1.0, default : 0.3)
SURROUND
PARAMETER
Checking the input signals
:
:
:
:
:
:
Input signal
HDMI monitor information
Input/output settings
Auto surround mode
USER MODE 1 ~ 3
Tuner preset stations
1
6 Press ENTER or SURROUND PARAMETER.
3
5
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Example: Dolby Digital
(When “MUSIC” is selected)
28
ENGLISH
Example: DTS
• “OSD-1” “FLAG” is not displayed if there is no FLAG
identification signal in the input signal.
• OSD-2:
The monitor’s resolution is displayed when an HDMI monitor is
connected to the AVR-2807.
• OSD-4:
This is displayed when the auto surround mode is set to “ON”
(
page 23) and the input mode is set to “AUTO”.
It is not displayed when the input mode is set to “ANALOG” or
“EXT. IN”.
ENGLISH
Basic Operation
Basic Operation
Surround modes and parameters
Signals and adjustability in the different modes
Parameter (default values are shown in parentheses)
Channel output
Surround Mode
PURE DIRECT, DIRECT
MULTI CH DIRECT
STEREO
EXT. IN
MULTI CH IN
WIDE SCREEN
DOLBY PRO LOGICIIx
DOLBY PRO LOGICII
DTS NEO:6
DOLBY DIGITAL
DTS SURROUND
7CH STEREO
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
FRONT
SURROUND
CENTER
L/R
L/R
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
B
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
E
E
B
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
E
SURROUND
SUB- D. COMP
BACK
WOOFER
*1
L/R
E
B
E
B
B
B
B
E
B
B
B
B
B
B
B
B
B
B
B
E
C : Signal
E : No signal
B : Turned on or off by speaker
configuration setting
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C (OFF)
E
C (OFF)
E
E
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
LFE
AFDM SB CH
*2
*1 OUT
C (0 dB)
C (0 dB)
C (0 dB)
E
C (0 dB)
C (0 dB)
E
E
E
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
E
C (ON)
E
E
C (ON)
E
E
E
E
C (ON)
C (ON)
E
E
E
E
E
E
E
E
E
E
C
E
E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
TONE
CONTROL
E
E
C (0 dB)
E
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (NOTE1)
C (NOTE2)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
C (0 dB)
CINEMA EQ.
E
E
E
E
E
C (OFF)
C (NOTE3)
C (NOTE4)
C (NOTE3)
C (OFF)
C (OFF)
E
E
E
E
E
E
E
E
E
MODE
E
E
E
E
E
E
C (CINEMA)
C (CINEMA)
C (CINEMA)
E
E
E
E
E
E
E
E
E
E
E
ROOM
SIZE
EFFECT
LEVEL
E
E
E
E
E
E
E
E
E
E
C (ON, 10)
E
E
E
E
E
E
E
E
E
E
E
E
E
C (Medium) C (10)
C (Medium) C (10)
C (Medium) C (10)
C (Medium) C (10)
C (Medium) C (10)
C (Medium) C (10)
E
E
E
E
C : Adjustable
E : Not adjustable
NOTE1 : BASS +6 dB, TREBLE 0 dB
NOTE2 : BASS +6 dB, TREBLE +4 dB
NOTE3 : This parameter is available when the “MODE” is set to “CINEMA”.
NOTE4 : This parameter is available when the “MODE” is set to “CINEMA” or “PL”.
*1: When playing Dolby Digital and DTS signals.
*2: When playing Dolby Digital, DTS, DVD-Audio and Super Audio CD.
29
ENGLISH
Dolby
Digital
DELAY TIME
NIGHT
mode
SUBWOOFER
ON/OFF
PRO LOGICII/IIx MUSIC MODE
only
PANORAMA DIMENSION
E
C (OFF)
E
E
E
C (OFF)
E
E
E
E
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
E
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
E
C (OFF)
C (OFF) C (30 msec)
E
C (OFF)
C : Signal
E : No signal
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C (OFF)
C (OFF)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C (3)
C (3)
E
E
E
E
E
E
E
E
E
E
E
E
C : Adjustable
E : Not adjustable
NEO:6
EXT. IN
MUSIC
only
MODE only
CENTER
WIDTH
CENTER
IMAGE
SW ATT
E
E
E
E
E
E
C (3)
C (3)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C (0.3)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
ENGLISH
Basic Operation
Basic Operation
2 Differences in surround mode names depending on the input signals
Button
Input signals
DTS
Surround Mode
Note
ANALOG
LINEAR
PCM
*1
*1
E
E
E
E
E
E
E
C
C
STANDARD
DTS SURROUND
DTS ES DSCRT6.1
DTS ES MTRX6.1
DTS SURROUND
DTS 96/24
DTS + PLIIx CINEMA
DTS + PLIIx MUSIC
DTS + NEO:6
DTS NEO:6 CINEMA
DTS NEO:6 MUSIC
DOLBY SURROUND
DOLBY DIGITAL EX
DOLBY DIGITAL
DOLBY DIGITAL+PLIIx CINEMA
DOLBY DIGITAL+PLIIx MUSIC
DOLBY PRO LOGICIIx CINEMA
DOLBY PRO LOGICIIx MUSIC
DOLBY PRO LOGICIIx GAME
DOLBY PRO LOGICII CINEMA
DOLBY PRO LOGICII MUSIC
DOLBY PRO LOGICII GAME
DOLBY PRO LOGIC
MULTI CH IN
MULTI CH IN
MULTI IN + PLIIx CINEMA
MULTI IN + PLIIx MUSIC
*2
*1
*1
*1
*2
*1
*2
*1
4:
B:
C:
E:
DOLBY DIGITAL
DOLBY DIGITAL
DOLBY
EX
DIGITAL
(With no Flag)
(5.1ch)
DOLBY
DIGITAL
(2ch)
DVD-Audio
(multi ch)
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
E
E
E
E
E
E
E
E
E
C
4
C
C
E
E
E
E
E
E
E
C
4
C
C
E
E
E
E
E
E
E
C
4
C
C
E
E
E
E
E
E
E
E
E
E
E
4
C
C
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
4
C
C
E
E
E
E
E
E
DTS ES MTRX
(With Flag)
DTS
(5.1ch)
DTS
96/24
DOLBY DIGITAL EX
(With Flag)
E
E
E
E
E
E
E
C
C
4 B
E
C
E
C
C
E
E
E
E
4 B
C
E
C
C
C
E
E
E
E
4
E
C
C
C
E
E
E
E
E
4
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
C
E
E
E
E
C
C
C
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
C
C
4 B
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Mode selectable in default status
Mode fixed when AFDM is “ON”
Selectable mode
Non-selectable mode
NOTE :
*1: This mode is not available when the Surround Back speaker setup is set to “None”.
*2: This mode is not available when the Surround Back speaker setup is set to “1spkr” or “None”.
30
ENGLISH
DVD-AUDIO
DVD176.4/
Audio
192kHz
(2ch)
DOLBY
DIGITAL
(3, 4, 5ch)
DTS ES DSCRT
(With Flag)
ENGLISH
Basic Operation
Basic Operation
Button
Input signals
DTS
Surround Mode
DIRECT
DIRECT
MULTI CH DIRECT
M DIRECT + PLIIx CINEMA
M DIRECT + PLIIx MUSIC
PURE DIRECT
PURE DIRECT
MULTI CH PURE DIRECT
M PURE D + PLIIx CINEMA
M PURE D + PLIIx MUSIC
DSP SIMULATION
7CH STEREO
WIDE SCREEN
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
STEREO
STEREO
Note
ANALOG
LINEAR
PCM
*2
*1
C
E
E
E
*2
*1
*3
DOLBY DIGITAL
DOLBY DIGITAL
DOLBY
DOLBY DIGITAL EX
EX
DIGITAL
(With Flag)
(With no Flag)
(5.1ch)
DOLBY
DIGITAL
(3, 4, 5ch)
DOLBY
DIGITAL
(2ch)
DVD-AUDIO
DVDDVD-Audio
176.4/
Audio
(multi ch)
192kHz
(2ch)
DTS ES DSCRT
(With Flag)
DTS ES MTRX
(With Flag)
DTS
(5.1ch)
DTS
96/24
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
E
C
C
C
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
C
E
E
E
E
C
C
C
C
E
E
E
C
E
E
E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
4
4
C
C
C
C
C
C
C
C
C
C
4
4
4 : Mode selectable in default status
C : Selectable mode
E : Non-selectable mode
NOTE :
*1: This mode is not available when the Surround Back speaker setup is set to “None”.
*2: This mode is not available when the Surround Back speaker setup is set to “1spkr” or “None”.
*3: If the Surround Back speaker setup is set to “None”, then “5CH STEREO” is displayed.
31
ENGLISH
ENGLISH
Basic Operation
Basic Operation
Using the DENON original surround modes
The AVR-2807 is equipped with a high performance digital signal processor (DSP) that uses digital signal processing to recreate sound
fields artificially. One of 10 surround modes can be selected according to the program source and parameters can be further adjusted
to achieve even more realistic sound fields.
Types of surround modes and their features
7CH STEREO
(NOTE 1)
This mode lets you enjoy stereo sound with 7 speakers. The front L (R) channel signals are played from the
surround and surround back L (R) channels and only the in-phase component of the L and R channels is
played on the center channel.
WIDE SCREEN
This mode recreates the atmosphere of watching a movie in a theater with a large screen. In this mode, all
sources are played in the 7.1-channel mode.
SUPER STADIUM
This mode recreates the atmosphere of watching a game of baseball, soccer or other sport in a stadium.
ROCK ARENA
This mode recreates the atmosphere of a live concert in an arena.
JAZZ CLUB
This mode recreates the atmosphere of a live concert in a club with low ceilings, hard walls and the artist
just in front of you.
CLASSIC CONCERT
This mode recreates the atmosphere of a concert hall with rich reverberations.
MONO MOVIE
(NOTE 2)
This mode recreates the atmosphere of an expansive sound field for movie sources recorded in monaural.
VIDEO GAME
This mode provides a rich sense of presence for video games.
MATRIX
This mode recreates music sources recorded in stereo with an enhanced sense of expansion.
VIRTUAL
This mode can be used to enjoy surround sound with only front speakers or when using headphones.
NOTE 1: “5CH STEREO” is displayed when “SB CH OUT” is set to “OFF”.
NOTE 2: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right),
so input signals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc.)
obtain a “Y” adapter cable to split the mono output to two outputs, and connect to the L and R inputs.
• Depending on the program source being played, the effect may not be very noticeable. In this case, try other surround modes,
without worrying about their names, to create a sound field suited to your tastes.
32
ENGLISH
ENGLISH
Basic Operation
DSP
SIMULATION
Basic Operation
ENTER
SURROUND
PARAMETER
Selecting the DSP surround simulation
1 Press [DSP SIMULATION].
7CH STEREO
SUPER STADIUM
VIRTUAL
ROCK ARENA
MATRIX
JAZZ CLUB
VIDEO GAME
<7CH STEREO>
DHFG
WIDE SCREEN
MONO MOVIE
<SURROUND BACK>
2 Press SURROUND PARAMETER.
Press D H to select the item, then press F G to
3 set.
EFFECT: (WIDE SCREEN mode only)
Effect signals with the multi-surround speaker effects are
played. When set to “OFF”, the SL/ SR channels are played
from the SBL/ SBR channels, respectively.
LEVEL: (WIDE SCREEN mode only)
Adjust the strength of effect signals “1” to “15”.
DHFG
SURROUND
PARAMETER
ENTER
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
SB CH OUT
• ON:
Surround back channel played.
• OFF:
Surround back channel not played.
This operation can also be performed using <SURROUND
BACK>.
ROOM SIZE:
Adjust the imaginary size of the recreated sound field space.
(Does not express size of room in which played.)
There are 5 parameters: “small”, “med.s”, “medium”,
“med.l” and “large”.
33
ENGLISH
DELAY TIME: (MATRIX mode only)
Adjust the delay time between “0 ms” and “300 ms”.
4 Press ENTER or SURROUND PARAMETER.
CLASSIC CONCERT
The 7CH STEREO mode can be selected directly by
pressing <7CH STEREO>.
DSP SIMULATION
EFFECT LEVEL:
Adjust the strength of the surround effect.
• Select “Default Yes” and press F to reset all the settings.
ENGLISH
Basic Operation
<FUNCTION>
Basic Operation
CH SEL/
ENTER
SURROUND
PARAMETER
Setting the tone control
Adjust the bass and treble to suit your tastes.
2 Adjusting the tone
1 Press SURROUND PARAMETER.
2 Press D H to select “TONE”, then press F.
In the direct mode, “TONE” cannot be selected.
<TONE DEFEAT>
DHFG
3 Press G to select “OFF”.
D H to select “Bass” or “Treble”, then press
4 Press
F G to set the level.
Can be adjusted within the range of –6 dB to +6 dB.
[MODE]
[MEMORY]
[BAND]
[SHIFT]
[TUNING]
[TUNER]
[CHANNEL]
5 Press ENTER.
6 Press ENTER or SURROUND PARAMETER.
1
Either press <TONE DEFEAT> or set “Tone Defeat”
to “ON” at step 3 in “Adjusting the tone”.
Adjusting the speaker volume
1 Press CH SEL/ENTER.
“SB” when surround back
speaker set to “1spkr”.
Not
displayed
when
“None” set.
Press D H or CH SEL/ENTER to select the
2 speaker.
The settable speaker switches each time this button is
pressed.
3 Press F G to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
2
DHFG
2 When you do not want to adjust the tone
SURROUND
PARAMETER
CH SEL/ENTER
3
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
34
ENGLISH
ENGLISH
Basic Operation
Basic Operation
Using the fader function
With this function, the volume of all the front side speakers or all
the rear side speakers can be adjusted (attenuated) at once.
1
2 Press D H or CH SEL/ENTER to select “Fader”.
Press CH SEL/ENTER.
3
Press F to attenuate the volume of all the front
side speakers, G to attenuate the volume of all the
rear side speakers.
The fader function does not affect the subwoofer.
It is possible to adjust so that the volume of the speaker
whose volume is the lowest is –12 dB.
2
3
Listening to the radio
Check that the remote control unit is set to “AMP”.
Auto tuning
Preset memory
the “Auto tuning” or “Manual tuning”
1 Use
operation to tune in the station to be preset in the
memory.
Either turn <FUNCTION> or press [TUNER] to
1 select “TUNER”.
2 Press [BAND] to select “AM” or “FM”.
3 Press [MODE] to set the auto tuning mode.
• The “AUTO” indicator lights.
4 Press [TUNING].
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the
“Manual tuning” operation.
Manual tuning
Either turn <FUNCTION> or press [TUNER] to
1 select
“TUNER”.
2 Press [BAND] to select “AM” or “FM”.
3 Press [MODE] to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
4 Press [TUNING] to tune in the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
35
ENGLISH
2 Press [MEMORY].
[SHIFT] to select the desired memory block
3 Press
(A to G).
[CHANNEL] to select the desired preset
4 Press
channel (1 to 8).
5 Press [MEMORY] again.
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
• The memory block can also be selected by pressing [SHIFT].
ENGLISH
Basic Operation
Basic Operation
Checking the preset stations
FG
<FUNCTION>
Press [ON SCREEN] repeatedly until the “Tuner
Preset Stations” screen appears on the OSD.
RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which
allows station to send additional information along with the
regular radio program signal.
2 Program Type (PTY)
PTY identifies the type of RDS program.
<TUNING PRESET>
Recalling preset stations
2 Main unit
[TUNER]
[SHIFT]
[CHANNEL]
1 Press <TUNING PRESET>.
Turn <FUNCTION> and select the desired preset
2 channel.
NEWS
News
WEATHER
Weather
AFFAIRS
Current Affairs
FINANCE
Finance
INFO
Information
CHILDREN
SPORT
Sports
EDUCATE
Education
DRAMA
Drama
CULTURE
Culture
SCIENCE
Science
VARIED
Varied
POP M
Pop Music
ROCK M
Rock Music
EASY M
LIGHT M
2 Remote control unit
CLASSICS
1 Press [SHIFT] to select the memory block.
Press [CHANNEL] to select the desired preset
2 channel.
F
[ON SCREEN]
OTHER M
SOCIAL
Children’s
programmes
Social Affairs
RELIGION
Religion
PHONE IN
Phone In
TRAVEL
Travel
LEISURE
Leisure
JAZZ
Jazz Music
COUNTRY
Country Music
Easy Listening
Music
Light Classical
NATION M
National Music
OLDIES
Oldies Music
Serious
Classical
FOLK M
Folk Music
DOCUMENT Documentary
Other Music
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
2 Radio Text (RT)
G
RT allows the RDS station to send text messages that appear on
the display.
[SEARCH]
NOTE:
• The operations described below pressing [SEARCH] will not
function in areas in which there are no RDS broadcasts.
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
36
ENGLISH
ENGLISH
Basic Operation
Basic Operation
2
RDS search
Either turn <FUNCTION> or press [TUNER] to
select “TUNER”.
1
• To continue searching, repeat step 2.
• If no other TP station is found when all the frequencies are
searched, “NO TP” is displayed.
3
2 Press [SEARCH] to select “RDS”.
3 Press [CHANNEL].
4
Either turn <FUNCTION> or press [TUNER] to
1 select
“TUNER”.
• Automatically begin the RDS search operation.
If no RDS stations is found with above operation, all the
reception band are searched.
2
RT (Radio Text)
Press [SEARCH] to select “RT” , then press F G to
2 select
“ON”.
3
• To continue searching, repeat step 3.
• If no other station broadcasting the designated program type is
found when all the frequencies are searched, “NO PTY” is
displayed.
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
TP search
• To continue searching, repeat step 2.
• If no other RDS station is found when all the frequencies are
searched, “NO RDS” is displayed.
PTY search
Either turn <FUNCTION> or press [TUNER] to
1 select
“TUNER”.
2 Press [SEARCH] to select “PTY”.
3 Press F G to call out the desired program type.
Either turn <FUNCTION> or press [TUNER] to
1 select
“TUNER”.
2 Press [SEARCH] to select “TP”.
3 Press [CHANNEL].
• Automatically begin the TP search operation.
If no TP station is found with above operation, all the
reception bands are searched.
2
3
4 Press [CHANNEL].
• Automatically begin the PTY search operation.
If there is no station broadcasting the designated program
type with above operation, all the reception bands are
searched.
37
ENGLISH
• To turn the display off, press F G.
• If no text data is being broadcast, “NO TEXT DATA” is
displayed.
ENGLISH
Advanced Operation
<ON/STANDBY> NIGHT
<FUNCTION>
Advanced Operation
<STATUS>
Night mode
The night mode can be set when playing Dolby Digital sources.
The dialogues are easier to hear at night and when listening with
the volume low.
Press NIGHT.
Combining the currently playing sound with
the desired image (VIDEO SELECT function)
Press <VIDEO SELECT>, turn <FUNCTION> until the
desired image appears on the display.
• The “NIGHT” indicator lights.
<VIDEO SELECT>
<ZONE2/REC SELECT>
USER MODE
• Canceling night mode:
Press NIGHT again.
• When the night mode is set to “ON”, the “D.COMP” surround
parameter can not be selected.
[ZONE2]
• To cancel, press <VIDEO SELECT> and turn <FUNCTION> to select
“SOURCE”.
• The video source selected with the video select function is
stored in the memory for the different input sources.
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal
of another function cannot be selected for the HDMI video
output.
User mode function
[MODE]
[MEMORY]
The AVR-2807 is equipped with a function for storing the
selected input source, the auto surround mode and input mode
in the memory and selecting these settings when you want to
use them.
NIGHT
2 Storing the settings in the memory
following are stored in the memory:
1 Theq Currently
set input source
w Currently set surround mode
e Currently set input mode
DHFG
CH SEL/ENTER
USER MODE
2 Press and hold USER MODE.
Press and hold in until the selected user mode indicator
lights.
2 Calling the settings out
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Press USER MODE at which the settings you want to
call out are stored.
• The selected user mode display lights.
38
ENGLISH
Personal memory plus function
The surround mode last selected and the input mode setting are
stored individually for the different input sources.
The surround parameters, tone control settings and playback
level balance for the different output channels are memorized
for each surround mode.
ENGLISH
Advanced Operation
Playing the
Advanced Operation
iPod®
Listening to music
The music recorded on the iPod can be played when using a
DENON original Dock (ASD-1R). The iPod can be controlled using
the buttons on the main unit and the remote control unit.
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
With the iPod, non-copyrighted contents and contents that
may be legally reproduced or played may be reproduced and
played by individuals for their personal use. Violating
copyrights is prohibited by law.
the AVR-2807
1 Connect
DENON original Dock (
and iPod using the
page 20).
the input terminal at “Setting the iPod
2 Assign
Assignment” (
page 47).
Use FUNCTION to select the function assigned in
3 step
2.
(iPod screen)
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
• The optional standard iPod Dock is DENON ASD-1R sold
separately.
1
Press D H to select the music file, then press
ENTER or G.
Press F to return to the music menu screen.
2 Press ENTER or G.
• Playback starts.
Pause:
Press ENTER during playback.
Press again to resume.
Manual search:
Press and hold in D H during playback.
• D : Fast reverse
• H : Fast forward
Track search:
Press D H during playback.
• D : Move to beginning of previous track
• H : Move to beginning of next track
• When <STATUS> is pressed during playback, the front panel
display switches between the title name, artist name and
album name.
• Depending on the iPod’s software version, it may not be
possible to operate the iPod from the AVR-2807. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
• If you do not want the on screen display to be displayed while
playing the iPod, set “Function/Mode Status” at “Setting the
On Screen Display” to “OFF” (
page 52).
• With the AVR-2807 it is possible to display folder names and file
names on the screen like titles. The AVR-2807 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Stop:
Press ENTER for at least 2 seconds during playback.
Use this procedure to view photo and video data stored on the
iPod on a monitor.
Repeat play:
Press [MODE].
The mode switches as follows each time [MODE] is pressed.
• RPT One: Single track repeat
• RPT All : All track repeat
[MODE] for at least 2 seconds to switch
1 Press
from the Browse mode to the Remote mode.
Shuffle play:
Press [MEMORY].
The mode switches as follows each time [MEMORY] is
pressed.
• SFL Songs : Single track shuffle
• SFL Albums: Album shuffle
The mode switches between the Browse mode and the
Remote mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only D H F G and ENTER can be used.
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-2807.
• Some of the functions may not operate, depending on the
type of iPod and the software version.
• “Remote iPod” is displayed on the AVR-2807’s display.
Watching the iPod’s screen, press D H to select
2 “Photos”
or “Video”, then press ENTER or G.
• The iPod’s photo and video data are displayed on the
monitor.
• To output photo or video data recorded on the iPod to the
monitor, the iPod’s “TV Out” setting (under “Video Settings”)
must be set to “ON”.
For details, refer to the iPod’s operating instructions.
Disconnecting the iPod
Press <ON/STANDBY> and set the AVR-2807’s
power to the standby mode.
The iPod can be disconnected after switching to a function
other than the one to which the iPod input is assigned.
39
ENGLISH
ENGLISH
Advanced Operation
Advanced Operation
Multi zone music entertainment system
Multi-zone playback using the SPEAKER terminals
• When the outputs of the ZONE2 output terminals are wired and connected to power amplifiers
installed in other rooms, different sources can be played in rooms other than the MAIN ZONE in
which this unit and the playback devices are installed. (Refer to ZONE2 on the diagram below.)
• Settings can be made at “Power Amp Assign” in the “System Setup Menu” so that the same
source as the ZONE2 output terminals can be played from the speakers connected to the ZONE2
speaker terminals (
page 21).
2 When using the SURROUND BACK amplifier as the ZONE2 output
When the surround back’s power amplifier is assigned to the ZONE2 output channel at “Power
Amp Assign” in the “System Setup Menu”, the surround back speaker terminals can be used as
the ZONE2 speaker out terminals (
page 54).
[System configuration and connections example]
• Using this AVR-2807 internal amplifier as the ZONE2.
To control playback devices other than the ones above, either use that device’s remote control
unit or preset a separately sold programmable remote control unit.
ZONE2
MAIN ZONE 5.1-channel systems
Monitor
Monitor
FL
• For instructions on installation and operation of separately sold devices, refer to the devices’
operating instructions.
FL
FR
C
Multi-zone playback using the ZONE2 output terminals
AVR-2807
DVD player
ZONE2 Video out
2 When using the power amplifier as the MAIN ZONE output
The AVR-2807 is equipped with ZONE2 output terminals for which the volume is fixed output level
and composite video output terminals as the ZONE2 output terminals.
Input
[System configuration and connections example]
SL
• Using this AVR-2807 external amplifier as the ZONE2.
MAIN ZONE 7.1-channel systems
ZONE2
Monitor
Monitor
ZONE2
Video out
FL
FR
C
FL
SW
AVR-2807
DVD player
Premain Amplifier
FR
B
ZONE2 Audio out
(Fixed out)
Input
SR
SL
SB
L
SB
R
: Multi source video signal cable
: Multi source audio signal cable
: Speaker cable
Refer to “Connections” (
SW
page 21).
40
ENGLISH
Multi-zone speaker out
SR
FR
ENGLISH
Advanced Operation
Advanced Operation
Outputting a program source to amplifier,
etc., in the ZONE2 room
(ZONE2 SELECT mode)
<FUNCTION>
1
Press <ZONE2/REC SELECT> to display the
“ZONE2 SOURCE” on the display.
• The “
” indicator lights.
RECOUT
ZONE2
output appears on the display.
3 Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
[ZONE2 OFF]
[ZONE1 (MAIN) ON/OFF]
[FUNCTION]
(ZONE2)
1 Press [ZONE2] to select “ZONE2”.
2 Press [ZONE2 ON] to turn on the zone power.
Press [ZONE2 OFF] to turn off the zone power.
Select the input source you wish to output.
“ZONE2 SOURCE” displayed, turn
3
2 With
<FUNCTION> to select the source you want to
<ZONE2/REC SELECT>
[ZONE2 ON]
[ZONE2]
Remote control unit operations during multisource playback
[CHANNEL]
• The signals of the source selected in the ZONE2 mode are also
output from the VCR-1, VCR-2 and CDR/TAPE recording output
terminals.
• Digital signals are not output from the ZONE2 audio output
terminals.
• About the MULTI ZONE connections (
page 40).
When the function is set to TUNER, the preset channel can
be selected using [CHANNEL].
volume of the outputs of the different zones
4 The
can be adjusted with [VOLUME].
The ZONE2 volume can be adjusted only when “ZONE2” is
selected at “Power Amp Assign” in the “System Setup
Menu” (
page 54).
Default volume setting:
ZONE2 : –40 dB
The zone volume can be adjusted within the range of –70 to
18 dB.
• When using ZONE2, it is possible to turn the power for the
MAIN ZONE (main zone) only on or off by pressing [ZONE1
(MAIN) ON/OFF].
[VOLUME]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
41
ENGLISH
ENGLISH
Advanced Operation
<NIGHT>
<FUNCTION>
<PURE DIRECT>
Advanced Operation
Recording (audio and/or video)
1
Press <ZONE2/REC SELECT> until “RECOUT”
appears on the display.
RECOUT
ZONE2
<FUNCTION> to select the source to be
2 Use
recorded (audio and/or video).
• The “
<POWER>
<ZONE2/REC SELECT>
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
” indicator lights.
3 Record (the audio or video signals).
For operations, see the operating instructions of the device
from which you are recording (audio or video signals).
• To cancel, press <ZONE2/REC SELECT> and set the function to
“ZONE2”.
NOTE:
• When the REC OUT mode is selected, [ZONE2] and
[FUNCTION] (ZONE2) cannot be operated.
• Digital signals are not output from the analog REC OUT,
OPTICAL 3 OUT and OPTICAL 4 OUT terminals.
About the memory functions
2 Last function memory
The various settings set when the AVR-2807’s power is switched
to standby are stored in the memory. When the power is turned
back on, the settings made when the power was switched to
standby are recalled.
2 Backup memory
The various settings are stored in the memory for about 1 week,
even when the power is turned off or the power cord is
unplugged.
Initialization of the microprocessor
Use the procedure described below to reset the microprocessor
if the display is abnormal or if the buttons on the main unit or the
remote control unit do not operate.
1 Switch off the unit using <POWER>.
Hold the following <PURE DIRECT> and <NIGHT>,
2 and
press <POWER>.
that the entire display is blinking with an
3 Check
interval of about 1 second, and release your
fingers from the 2 buttons.
• The microprocessor will be initialized.
• If step 3 does not work, start over from step 1.
• If the microprocessor has been reset, all the settings are reset
to the default values.
42
ENGLISH
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
System setup items and default values
1. Auto Setup/Room EQ
Default settings
Page
1 Auto Setup
This unit performs an analysis of the speaker system and
measures the acoustic characteristics of your room to permit
an appropriate automatic setting.
Items
–
9 ~ 12
Room EQ
Setup
Set the Room Equalizer setting with “All” or “Assign” for
each surround mode.
All, Room EQ = OFF
60
Direct Mode
3
Setup
Set the ON/OFF setting of Room Equalizer, in the case of the
surround mode is in “Direct” or “Pure Direct”.
OFF
60
Mic Input
Select
Sets whether the setup microphone is connected to the pin
jack (V. AUX L channel) or mIni jack (SETUP MIC).
Mic
61
2
4
2. Speaker Setup
Items
1
2
Speaker
Config.
Automatically set the output component and properties for
the various channels according to the combination of
speakers to be actually used for surround playback.
Subwoofer
Setup
Select the method of playback of the subwoofer for playing
the low bass signals.
3 Distance
4
5
Default settings
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
Front Sp.
Center Sp.
Subwoofer
Surround Sp.
Large
Small
Yes
Small
Small / 2spkrs
LFE
Center
Subwoofer
Surround
L&R
Surround
Back
3.6 m (12 ft)
3.6 m (12 ft)
3.6 m (12 ft)
3.0 m (10 ft)
3.0 m (10 ft)
Set the volume of the various speakers so that the sound Front
L
output from the speakers and the subwoofer seems to have
the same volume level.
0 dB
Crossover
Frequency
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
43
Front
R
Center
0 dB
0 dB
Surround L Surround R
0 dB
0 dB
80 Hz
56, 57
57
Front
L&R
Channel
Level
ENGLISH
Page
Surround Back
Sp.
Surround
Back L
Surround
Back R
Subwoofer
0 dB
0 dB
0 dB
57, 58
58, 59
59
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
3. Audio Input Setup
Items
1
Digital In
Assign
Default settings
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD
DVD
COAX 1 COAX 2
Page
VDP
TV
DBS
VCR-1
VCR-2
CDR /
TAPE
OPT 1
OFF
OPT 2
OPT 3
OFF
OPT 4
V.AUX
OPT 5
47
EXT. IN
2 Subwoofer
Level
Sets the playback level of the analog signal that was input to
the EXT. IN subwoofer terminal.
SW Level = +15 dB
47
3 iPod Assign
It is possible to assign the DENON original Dock’s audio
and/or video signals to any input terminals on the AVR-2807
and play them.
iPod Function = OFF
47
4
5
Input
The playback level is corrected individually for the different TUNER PHONO CD
Function Lev. input sources.
0 dB
0 dB 0 dB
Function
Rename
The name of the input function that is displayed can be
TUNER PHONO
changed.
Up to 56 FM stations can be preset Auto Preset
automatically.
Memory
6
Tuner
Presets
CD
CDR /
TAPE
DVD
0 dB
0 dB 0 dB
CDR /
TAPE
DVD
VDP
TV
DBS
VCR-1 VCR-2 V.AUX
0 dB
0 dB
0 dB
TV
DBS
VCR-1 VCR-2 V.AUX
A1 ~ A8
87.5/89.1/98.1/108.0/90.1/90.1/90.1/90.1 MHz
B1 ~ B8
522/603/999/1404/1611 kHz, 90.1/90.1/90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Preset channels that are not used often can
Preset Skip
be skipped.
0 dB
48
0 dB
48
48
All preset channels = ON
49
–
49
Default settings
Page
The preset channels can be given the names Preset
you want.
Name
4. Video Setup
VDP
Items
HDMI In
Assign
The HDMI input terminals are assigned for the different
input sources.
Select the HDMI audio signal playback method.
DVD
VDP
TV
DBS
VCR-1
VCR-2
V.AUX
NONE
NONE
NONE
NONE
NONE
NONE
NONE
2
Component
In Assign
This assigns the component video input terminals for the
different input sources.
DVD
VDP
TV
DBS
VCR-1
VCR-2
V.AUX
1-RCA
NONE
2-RCA
3-RCA
NONE
NONE
NONE
3
Video
Convert
This sets whether or not to use the video conversion
function.
ON
50
4
HDMI Out
Setup
Set whether or not to up-convert from analog video signals
to HDMI. When this function is used, the format of the
signal output from the HDMI terminal can be set.
Convert = ON
i/p Convert = ON
Color Space = Y Cb Cr
RGB Mode = Normal
51
5 Audio Delay
Adjust the time delay between the video and audio signals.
0 ms
51
Set whether or not to display the on screen display for
indications other than the menu screens.
Function/Mode = ON
Master Volume = ON
Mode = Mode 1
52
1
6
On Screen
Display
44
ENGLISH
49, 50
50
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
5. Advanced Playback
Items
Default settings
Page
Make the 2-channel direct mode and stereo mode speaker
2ch
1
Direct/Stereo settings.
Basic
52
Turn the audio compression on or off when down-mixing
Dolby Digital signals.
OFF
53
Set whether or not to store the surround mode last played
for the input signal.
Auto Surround Mode = ON
53
Manual EQ
Setup
Adjust the tone of the various speakers while listening to the
playback signals.
All Channels and Frequency = 0 dB
53, 54
Default settings
Page
1
Power Amp
Assign
To suit your preference, a surround back channel’s power
amplifier can be assigned to the front channel (“Front A” or
“Front B”) for bi-amp playback, ZONE2.
S. Back
54
2
Volume
Control
This sets the volume level of output.
Vol.Limit = OFF
P. On Lev. = LAST
Mute Lev. = FULL
55
2
Dolby Digital
Setup
Auto
3 Surround
Mode
4
6. Option Setup
Items
Main
ZONE = MAIN, All Surround Modes = ON
Trigger Out
1
3 Trigger Out
Use the DC12V output of the AVR-2807’s
two trigger out jacks in association with the
various input sources and surround modes.
This sets whether or not to lock the system setup settings
so that they cannot be changed.
45
ENGLISH
PHONO
CD
CDR /
TAPE
DVD
OFF
OFF
OFF
OFF
ON
VDP
TV
DBS
VCR-1
VCR-2
V.AUX
ON
ON
ON
ON
ON
ON
ZONE = 2
Trigger Out
2
4 Setup Lock
TUNER
TUNER
PHONO
CD
CDR /
TAPE
DVD
VDP
TV
DBS
VCR-1
VCR-2
V.AUX
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
Setup Lock = OFF
55
56
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Navigating through the System Setup Menu
ENTER
1
In addition to the easily understandable on screen display, the
AVR-2807 is also equipped with displays for checking the
settings. Use this when making settings and operating.
Below are some examples of typical displays.
Press SYSTEM SETUP.
• The “System Setup Menu” appears.
D H to select the item you want to set, then
2 Press
press ENTER.
SYSTEM SETUP
About the display
3
Press D H again to select the item you want to set,
then press ENTER.
4
To change the setting:
Press D H to select the item you want to change,
then press F G to change the setting.
Display title
[ Display ]
Menu number
*System Setup
Auto Set/RoomEQ
Submenu title
DHFG
*System Setup
Speaker Setup
Select “Default Yes”, then press F to reset to the default
setting.
5 Press ENTER and set a new item.
Press SYSTEM SETUP to return to the “System
6 Setup
Menu” or the main menu.
*Auto Setup
Start
Press D H to select
the menu.
Press F to select.
Currently selected line
Current setting
[ On screen display ]
[ Display ]
2
*Digital In
CD
: COAX1
Press F G to change the
setting.
*System Setup
Audio In Setup
3
*Audio In Setup
Digital In
SYSTEM SETUP
DHFG
ENTER
*Distance
Meters
:
Feet
Press F G to select one or
the other.
4
*Digital In
CD
: COAX1
6
*System Setup
Exit
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
46
ENGLISH
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Audio Input Setup
Setting the EXT. IN Subwoofer Level
Setting the Digital In Assignment
This assigns the digital input terminals for the different input
sources.
D H to select “Audio Input Setup”, then
1 Press
press ENTER.
D H to select “Digital In Assign”, then press
2 Press
ENTER.
D H to select the input source, then press F
3 Press
G to set.
Sets the playback level of the analog signal that was input to the
EXT. IN subwoofer terminal.
OFF:
This is the factory default setting.
1
2
CD, CDR/TAPE:
When using a DENON original Dock, it is possible to connect
with the audio input terminal of the assigned function.
DVD, VDP, DBS, TV, VCR-1, VCR-2, V.Aux:
When using a DENON original Dock, it is possible to connect
with the audio and video input terminals of the assigned
function.
The HDMI input terminal is displayed when it is assigned to
the input source at “HDMI In Assign” (
page 49, 50).
1
It is possible to assign the DENON original Dock’s audio and
video signals to any input terminals on the AVR-2807 and play
them.
Press D H to select “EXT. IN Subwoofer Level”,
1 then
D H to select “iPod Assign”, then press
press ENTER.
1 Press
ENTER.
2 Press F G to set.
2 Press F G to set.
3 Press ENTER.
COAX1, COAX2, OPT1, OPT2, OPT3, OPT4, OPT5:
Assign the different terminals according to the devices
connected to the AVR-2807’s input terminals.
4
Setting the iPod Assignment
3 Press ENTER.
Press ENTER.
1
2
2
3
h
• “PHONO” and “TUNER” cannot be selected on the “Digital In
Assign” screen.
• It is not possible to make the “Digital In Assign” settings for
the function assigned at “iPod Assign”.
(When “VDP” is selected)
47
ENGLISH
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Setting the Input Function Level
The playback level is corrected individually for the different input
sources.
Setting the Function Rename
The name of the input function that is displayed can be changed.
Setting the Tuner Presets
2 Auto Preset Memory
Up to 56 FM stations can be preset automatically.
1
Press D H to select “Input Function Lev.”, then
D H to select “Tuner Presets”, then press
1 press
1 Press
ENTER.
ENTER.
Press D H to select the input function, then press
2
Press D H to select the input source, then press F
F G to set.
D H to select “Auto Preset Memory”, then
2 G to set.
2 Press
press ENTER.
F G to move the cursor ( 2 ) to the desired
3 Press
position, then press D H to select the character.
3 Press F to select “Yes”.
3 Press ENTER.
Press D H to select “Function Rename”, then
press ENTER.
The volume can be adjusted within the range –12 dB to +12
dB.
• “Search” blinks on the screen and searching begins.
• “Completed” appears once searching is completed.
Up to 8 characters can be input.
The characters that can be input are shown below.
1
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz01234
56789
! ” # % & ’ ( ) * + , – . / : ; < = > ? @ [ \ ] (space)
2
1
2
3
4 Repeat step 3 to input the input source name.
To set the input function name back to how it was:
q Press F G to highlight the input function name, then
press D H.
w Press D H to select “Default Yes”, then press F.
• After completing this setting, check that the playback levels for
the different sources are the same.
all the characters have been input, press
5 Once
ENTER.
1
3
2
4
48
ENGLISH
• If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation (
page 35) to
tune in the station, then preset it using the manual “Preset
memory” operation (
page 35).
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
2 Preset Skip
2 Preset Name
Preset channels that are not used often can be skipped.
The preset channels can be given the names you want.
1
1
Press D H to select “Preset Skip”, then press
ENTER.
Video Setup
Press D H to select “Preset Name”, then press
ENTER.
D H to select the preset channel, then press
D H to select the preset channel, then press
2 Press
2 Press
F G to set.
F G to set.
ON, OFF:
Select “OFF” to skip the preset channel, “ON” if you do not
want to skip.
When H is pressed at the very bottom of the screen, then
the next preset memory block appears.
3 Press F G to select the preset memory block.
4 Repeat steps 2 and 3.
5 Press ENTER.
1
F G to move the cursor ( 2 ) to the desired
3 Press
position, then press D H to select the character.
Up to 8 characters can be input.
The characters that can be input are shown below.
ABCDEFGHIJKLMNOPQRSTUVWXY
Zabcdefghijklmnopqrstuvwxyz012
3456789
! ” # % & ’ ( ) * + , – . / : ; < = > ? @ [ \ ] (space)
4 Repeat step 3 to input the preset channel name.
To set the preset channel name back to how it was:
q Press F G to highlight the preset channel, then press D
H.
w Press D H to select “Default Yes”, then press F.
all the characters have been input, press
5 Once
ENTER.
2
3
6 Press ENTER.
1
Setting the HDMI In Assignment
The HDMI input terminals are assigned for the different input
sources.
Select the HDMI audio signal playback method.
D H to select “Video Setup”, then press
1 Press
ENTER.
D H to select “HDMI In Assign”, then press
2 Press
ENTER.
D H to select the input source, then press F
3 Press
G to set.
HDMI1, HDMI2:
Assign the HDMI input signal to “HDMI1” (or “HDMI2”).
Press D H to select “Audio”, then press F G to
4 select
where to output the audio signals.
AMP:
Output the speakers connected to the AVR-2807.
TV:
Output the TV connected to the AVR-2807.
no audio signal is included in the input signal:
5 IfPress
D H to select the input source, then press F
G to set.
2
EXT. IN, ANALOG:
Output the selected audio input signal to the set terminal.
6 Press ENTER.
3
4
49
ENGLISH
ENGLISH
Advanced Setup – Part 1
1
4
Advanced Setup – Part 1
Setting the Component In Assignment
2
3
5
This assigns the component video input terminals for the
different input sources.
1
Press D H to select “Component In Assign”, then
press ENTER.
2
Press D H to select the input source, then press F
G to set.
1-RCA, 2-RCA, 3-RCA:
Assign the component video input terminal to “1-RCA” (or “2RCA” or “3-RCA”).
3
• If a monitor is connected with an HDMI cable but the monitor
is not compatible with HDMI audio signal playback, only the
video signals are output to the monitor from the AVR-2807.
• Audio signals input from the analog and digital terminals are not
output to the TV.
• With HDMI, the video and audio signals are transferred
simultaneously. When HDMI is assigned to an input source, the
digital audio input assignment switches to HDMI along with the
video input.
When this setting is made for input sources to which a digital
audio input (COAXIAL or OPTICAL) is previously assigned, the
digital audio assignment is set to HDMI.
In this case, reassign the digital input using the procedure
described at “Digital In Assign” (
page 47).
• It is not possible to make the “HDMI In Assign” settings for the
function assigned at “iPod Assign”.
This sets whether or not to use the video conversion function.
D H to select “Video Convert”, then press
1 Press
ENTER.
D H to select the input source, then press F
2 Press
G to set.
ON, OFF:
Select “ON” to use the video conversion function, “OFF” if
you do not want to use it.
3 Press ENTER.
Press ENTER.
1
Compatible with HDMI1 and HDMI2.
1
Setting the Video Convert
2
• Signals input to the component video input terminal are output
simultaneously from component video monitor output
terminals 1 and 2.
• It is not possible to make the “Component In Assign” settings
for the function assigned at “iPod Assign”.
50
ENGLISH
2
• If the resolution of the input component video signal is
something other than 480i/576i, down-conversion from the
component video signal to S-Video or video signals is not
possible. If you do not want to use the component video output
terminal, connect the player to the S-Video or video input
terminal (
page 14, 15).
• When a non-standard video signal from a game machine or
some other source is input, the video conversion function
might not operate. If this happens, please set the conversion
mode to “OFF”.
• When the video conversion function has been used,
information such as that of text broadcasts which has been
added to the video signal might not be output. If this happens,
please set the conversion mode to “OFF”.
ENGLISH
Advanced Setup – Part 1
Setting the HDMI Out Setup
Set whether or not to up-convert from analog video signals to
HDMI. When this function is used, the format of the signal
output from the HDMI terminal can be set.
Advanced Setup – Part 1
1
Setting the Audio Delay
2
D H to select “Audio Delay”, then press
1 Press
ENTER.
Press D H to select “HDMI Out Setup”, then
1 press
ENTER.
Press D H to select the item, then press F G to
2 set.
Analog to HDMI Convert:
• ON:
Setting for converting analog video signals into HDMI signals.
• OFF:
Setting for not converting analog video signals into HDMI
signals.
i/p Convert:
• ON:
When the video input signal is a video, S-Video or 480i/576i
component video signal, the resolution is converted to
480p/576p and the signal is output from the HDMI monitor
output terminal.
• OFF:
The video input signal is output as such from the HDMI
monitor output terminal without being converted.
Color Space:
• Y Cb Cr:
The Y Cb Cr format video signals is output via the HDMI
output terminal.
• RGB:
The RGB format video signals is output via the HDMI output
terminal.
Adjust the time delay between the video and audio signals.
2 Press F G to set.
• When the HDMI terminals are connected, the black may seem
to stand out, depending on the TV or the monitor. In this case,
set this to “Enhanced”.
• When “Y Cb Cr” is selected under “Color Space”, “RGB Mode
Setup” will have no effect.
• When “OFF” is selected under “i/p Convert”, the signal is
output with the same resolution as input from the video, SVideo and component video terminals.
The OSD, however, is output with a resolution of 480i, so use
a monitor compatible with this resolution.
• “i/p Convert”, “Color Space” and “RGB Mode Setup” are only
displayed when “Analog to HDMI Convert” is set to “ON”.
• When connecting to an HDCP compatible monitor equipped
with DVI-D terminal using an HDMI/DVI-D converter cable, the
signals are output in RGB format, regardless of the “Color
Space” setting.
• To view the on screen display using an HDMI monitor, set
“Analog to HDMI Convert” at “HDMI Out Setup” to “ON”
(default).
0 ms ~ 200 ms:
Adjust the time delay.
With a movie source, for example, adjust so that the
movement of the actors’ lips is synchronized with the
sound.
3 Press ENTER.
1
2
• By default, this menu is not displayed when no digital signals
are being input.
• To make this setting for the component video signal, select the
delay time and turn the on screen display off, then check that
the timing of the component video and audio match.
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct mode or stereo mode
(Front speaker setting “Large”, TONE DEFEAT “ON” and
Room EQ “OFF”).
RGB Mode Setup:
• Normal:
Signals are output via the HDMI output terminal with a digital
RGB video range (data range) of 16 (black) to 235 (white).
• Enhanced:
Signals are output via the HDMI output connector with a
digital RGB video range (data range) of 0 (black) to 255 (white).
3 Press ENTER.
51
ENGLISH
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Setting the On Screen Display (OSD)
Set whether or not to display the on screen display for indications
other than the menu screens.
D H to select “On Screen Display”, then
1 Press
press ENTER.
2
Press D H to select the item, then press F G to
set.
Function/Mode Status:
• ON, OFF:
Select “ON” to display the on screen display when the input
source is selected, “OFF” if you do not want to display it.
Master Volume Status:
• ON, OFF:
Select “ON” to display the on screen display when the main
volume is adjusted, “OFF” if you do not want to display it.
Display Mode:
• Mode 1:
Flickering is not prevented.
• Mode 2:
Prevents flickering of the on screen display when there is no
video signal.
Use this mode if the on screen display is not displayed in
“Mode1”.
3
1
1
Advanced Playback
Setting the 2ch Direct/Stereo
Make the 2-channel direct mode and stereo mode speaker
settings.
Press D H to select “Advanced Playback”, then
1 press
ENTER.
D H to select “2ch Direct / Stereo”, then
2 Press
press ENTER.
• The current settings are displayed.
3 Press F G to select “Custom”.
Press D H to select the item, then press F G to
4 set.
Large:
Select this when using large speakers with ample low
frequency reproduction capabilities.
Small:
Select this when using small speakers without ample low
frequency reproduction capabilities.
Yes, No:
Select “Yes” when a subwoofer is connected, “No” when no
subwoofer is connected.
Press ENTER.
2
3
LFE:
For any channel(s) that are set to “Large”, low frequencies in
that channel’s corresponding source are directed to that
loudspeaker only. The low frequencies played from the
subwoofer are only the LFE signals and the low frequencies
of channels set to “Small”.
LFE+Main:
Low frequencies from speaker channels that have been set to
“Large” are reproduced from those speakers as well as from
the subwoofer(s).
5 Press ENTER.
52
ENGLISH
4
2
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Setting the Dolby Digital Downmix Option
Setup
Turn the audio compression on or off when down-mixing Dolby
Digital signals.
1
Press D H to select “Dolby Digital Setup”, then
press ENTER.
2
Press F G to set.
ON:
The dynamic range is compressed automatically according to
the combination of speakers being used.
Set “Compression” to “ON” if it seems that sound is
distorted because the input level exceeds the allowable input
for the front speakers.
OFF:
The dynamic range is not compressed.
Normally using in this mode.
3
1
Setting the Auto Surround Mode
Set whether or not to store the surround mode last played for the
input signal.
The surround mode used at last for the 4 types of input signals
shown below is stored in the memory, and the signal is
automatically played with that surround mode the next time it is
input.
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY PLIIx Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND)
r PCM multi-channel signals other than Dolby Digital and
DTS (MULTI CH IN)
Default settings are indicated in ( ).
During playback in the PURE DIRECT mode, the surround
mode does not change even if the input signal is changed.
D H to select “Auto Surround Mode”, then
1 Press
press ENTER.
2 Press F G to set.
3 Press ENTER.
Press ENTER.
2
Setting the Manual Equalizer Setup
Adjust the tone of the various speakers while listening to the
playback signals.
D H to select “Manual EQ Setup”, then
1 Press
press ENTER.
2 Press F G to set, then press ENTER.
All CH:
All channels can be adjusted simultaneously.
L/R CH:
The left and right channels of the pair of speakers can be
adjusted simultaneously.
Each CH:
The channels can be adjusted separately.
3 Press F G to select the speaker.
The display changes as follows.
q Select “L/R CH”
FL/FR
SBL/SBR
1
2
C
SL/SR
w Select “Each CH”
FL
FR
C
(2 speakers)
SBL
SBR
SB
SR
SL
(1 speaker)
e Select “All CH”
In this case, speaker selection is not performed.
• When a center speaker or surround speakers are not
connected, the sounds in those channels are directed to the
front speakers.
D H to select the frequency, then press F G
4 Press
to adjust.
The level of the various frequencies can be adjusted
between –20 dB and +6 dB.
5 Press ENTER.
53
ENGLISH
ENGLISH
Advanced Setup – Part 1
1
Advanced Setup – Part 1
1
Option Setup
2
2
Setting the Power Amplifier Assignment
3
To suit your preference, a surround back channel’s power
amplifier can be assigned to the front channel (“Front A” or
“Front B”) for bi-amp playback, ZONE2.
3
4
D H to select “Option Setup”, then press
1 Press
ENTER.
D H to select “Power Amp Assign”, then
2 Press
press ENTER.
3 Press F G to set.
• “Base Curve Copy” is displayed after performing the Auto
Setup.
2 Manually adjusting the room equalizer’s
“Flat” correction curve set with the auto
setup procedure
Press D H to select “Base Curve Copy”, then
1 press
F.
S. Back:
The surround back speakers are used in MAIN ZONE.
Front Bi-Amp connections
Dynamic sound with a range wider than that of full range
systems can be played by connecting bi-amp compatible
speakers to the AVR-2807. Be sure to consult the owner’s
manual of your bi-amp-capable speakers for further
information before proceeding.
AVR-2807
Front A, Front B:
This provides a bi-amp mode for the 2 main front speakers,
replicating the front A or front B amplifier channel’s outputs.
ZONE2:
This mode assigns the surround back amplifier channels to
provide ZONE2 speaker-level outputs from the surround back
speaker terminals.
4 Press ENTER.
2 Press F to select “Yes”, then press ENTER.
• The type of the copied correction curve is displayed in the
upper right of this screen.
1
SPEAKER
[L]
2
NOTE:
• When making bi-amp connections, be sure to remove
the short-circuiting bar included with the speaker.
54
ENGLISH
ENGLISH
Advanced Setup – Part 1
Setting the Volume Control
This sets the volume level of output.
Advanced Setup – Part 1
1
2
D H to select the input source, then press F
4 Press
G to set.
D H to select “Volume Control”, then press
1 Press
ENTER.
ON, OFF:
When that input source is selected, the power supplied from
the trigger out jack turns on (or off).
Press D H to select the item, then press F G to
2 set.
“MAIN” was selected at step 3:
5 When
Press D H to select the surround mode, then
Vol. Limit:
Set the volume’s upper limit.
• OFF:
If you do not want to set a volume limit, select “OFF”.
In this case, the volume can be set to the AVR-2807’s
maximum volume (output) level of +18 dB, which is
extremely loud.
• –20 dB, –10 dB, 0 dB:
The volume cannot be increased above the selected levels.
P. On Lev.:
Set the volume level when the power is turned on.
You can adjust the MAIN ZONE volume level within the range
of –80 to +18 dB (and ZONE2 volume level within the range
of –70 to +18 dB).
• LAST
The volume set when the AVR-2807 was last used is stored
in the memory and set when the power is turned on.
• – – – (Mute)
The volume is always muted when the power is turned on.
Mute Lev.:
Set the level of volume attenuation in the mute mode.
• FULL
The volume is fully muted.
• –20 dB, –40 dB
The volume is lowered 20 dB (or 40 dB) from the current level.
3 Press ENTER.
press F G to set.
• When the power amplifier is assigned to either of the ZONE2
channels at “Power Amp Assign”, “–VAR–” (only variable) is
displayed and the fixed level cannot be set.
ON:
If “ON” is selected when an input source set to “ON” is
selected, the power supplied from the trigger out jack turns
on.
OFF:
If “OFF” is selected when an input source set to “ON” is
selected, the power supplied from the trigger out jack turns
off.
6 Press ENTER.
Setting the Trigger Out
1
Use the DC12V output of the AVR-2807’s 2 trigger out jacks in
association with the various input sources and surround modes.
If “ZONE = MAIN” is selected, settings can be made for the
individual surround modes.
2
D H to select “Trigger Out”, then press
1 Press
ENTER.
D H to select the trigger out jacks, then
2 Press
press ENTER.
3 Press F G to select “MAIN” or “ZONE2”.
The power supplied from the trigger out jack turns on and off
when the power for the set zone is turned on and off.
55
ENGLISH
4
5
3
ENGLISH
Advanced Setup – Part 1
Setting the Setup Lock
This sets whether or not to lock the system setup settings so
that they cannot be changed.
D H to select “Setup Lock”, then press
1 Press
ENTER.
2 Press F to select “ON”, then press ENTER.
1
Advanced Setup – Part 2
Speaker Setup
Setting the Speaker Configuration
• If the “Auto Setup” procedure has already been performed,
there is no need to make this setting.
• Perform this setting if you wish to make the settings for your
speaker systems manually.
Automatically set the output component and properties for the
various channels according to the combination of speakers to be
actually used for surround playback.
D H to select “Speaker Setup”, then press
1 Press
ENTER.
ENTER
D H to select “Speaker Config.”, then press
2 Press
ENTER.
2
D H to select the speaker, then press F G
3 Press
to set.
Large:
Select this when using large speakers with ample low
frequency reproduction capabilities.
• When the setup lock function is activated, the settings listed
below cannot be changed, and “SETUP LOCKED!” is displayed
when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
• Room EQ settings
• To unlock, press SYSTEM SETUP again and display the “Setup
Lock” screen, then select “OFF” and press ENTER.
SYSTEM SETUP
DHFG
Small:
Select this when using small speakers without ample low
frequency reproduction capabilities.
None:
Select this when no speaker is connected.
Yes / No:
Select “Yes” when a subwoofer is connected, “No” when no
subwoofer is connected.
2spkrs / 1spkr:
Select the number of surround back speakers.
SYSTEM SETUP
DHFG
ENTER
[TEST TONE]
About the button names in this explanation
<
> : Buttons on the main unit
[
] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
56
ENGLISH
A subwoofer with sufficient low frequency playback
capability can better handle deep bass than most main and
surround speakers, and the system’s overall performance
will be greatly enhanced when “Small” is set for the main
(front) and surround speakers.
When “Front” is set to “Small”, “Subwoofer” is
automatically set to “Yes”, and when “Subwoofer” is set to
“No”, “Front” is automatically set to “Large”.
4 Press ENTER.
ENGLISH
Advanced Setup – Part 2
1
Advanced Setup – Part 2
Setting the Subwoofer Setup
2
Select the method of playback of the subwoofer for playing the
low bass signals.
3
D H to select “Subwoofer Setup”, then
1 Press
press ENTER.
h
Center Speaker
Front Speaker
Subwoofer
Surround Speaker
Surround back Speaker
• Select “Large” or “Small” not according to the actual size of
the speaker but according to the speaker’s capacity for playing
low frequency (bass sound below the frequency set for the
Crossover Frequency) signals. If you do not know, try
comparing the sound at both settings (setting the volume to a
level low enough so as not to damage the speakers) to
determine the proper setting.
2 Press F G to set.
Setting the Distance
This parameter is for optimizing the timing with which the audio
signals are produced from the speakers and subwoofer
according to the listening position.
Preparations:
Measure the distances between the listening position and the
speakers (L1 to L8 on the diagram at the below).
FL
LFE:
For any channel(s) that are set to “Large”, low frequencies in
that channel’s corresponding source are directed to that
loudspeaker only. The low frequencies played from the
subwoofer are only the LFE signals and the low frequencies
of channels set to “Small”.
C
SW
L1
LFE+Main:
Low frequencies from speaker channels that have been set to
“Large” are reproduced from those speakers as well as from
the subwoofer(s).
1
Listening position
L6
L5
L7
Press ENTER.
2
L2
L4
SL
3
L3
FR
SBL
SR
L8
SBR
D H to select “Distance”, then press
1 Press
ENTER.
2 Press F G to select “Meters” or “Feet”.
• The subwoofer mode setting is only valid when and “Yes” is
set for the subwoofer in the “Setting the Speaker
Configuration”.
• Select the “LFE+Main” mode if you want low frequency
signals to always be played from the subwoofer channel.
• Select the mode achieving a voluminous bass sound when
playing music or movie sources.
57
ENGLISH
ENGLISH
Advanced Setup – Part 2
Advanced Setup – Part 2
D H to select the speaker, then press F G
3 Press
to set.
4 Press ENTER.
1
1
Setting the Channel Level
Set the volume of the various speakers so that the sound output
from the speakers and the subwoofer seems to have the same
volume level.
2
3
D H to select “Channel Level”, then press
1 Press
ENTER.
2
2 Press F G to set.
4
-1
Auto:
Adjust the level while listening to the test tones produced
automatically from each speaker.
Test tones are automatically emitted from each speaker.
3
.....
.....
.....
.....
L1
L2
L3
L4
Manual:
Adjust with the speaker from which the test tone is output
switched manually.
D H to select “Test Tone Start”, then press
3 Press
F to select “Yes”.
.....
.....
.....
.....
L5
L6
L7
L8
• To cancel the setting, press H and select “Level Clear”, then
press F and select “Yes”.
“Auto” mode is selected:
4 When
Press F G to adjust the volume.
-1
• Test tones are output automatically, in the order shown
below.
FL
C
SR
FR
(2 speakers)
• Press D to select “Step”, then press F G to change the
amount of variation if so desired.
• The distance changes in units of 0.1 meters (1 foot) or 0.01
meters (0.1 foot) each time the button is pressed. Select the
value closest to the measured distance.
• Please note that the difference of distance for every
speaker should be 6.0 m (20 ft) or less. If you set an invalid
distance, a CAUTION notice, such as screen right will
appear. In such cases, move the appropriate speaker to the
position of the displayed value.
4
-2
SW
SL
SBL
SB
SBR
(1 speaker)
The volume can be adjusted within the range –12 dB to +12
dB.
“Manual” mode is selected:
4 When
Press D H to select the speaker, then press F G
-2 to adjust the volume.
5 Press ENTER.
58
ENGLISH
• To adjust the channel level separately for the different play
modes after setting the channel level, perform the operation on
page 34.
ENGLISH
Advanced Setup – Part 2
Advanced Setup – Part 2
2 Adjusting the test tone using the remote
control unit
Adjustment of the test tones using the remote control unit is
only possible in the “Auto” mode and only valid in the
STANDARD (Dolby Surround and DTS Surround) mode. The
adjusted levels are automatically stored for the different
surround modes.
1
2
F G to select “Advanced”
1 Press
“Crossover Frequency” screen.
• Test tones are output from the different speakers.
• The crossover frequency mode is valid only when subwoofer is
set to “ON”, and when one or more speakers are set to
“Small”, as described in section “Setting the Speaker
Configuration” (
page 56, 57).
• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”
(
page 57) is displayed at the top right of the screen.
2
3 Press [TEST TONE].
at the
D H to select the speaker, then press F G
2 Press
to set.
1 Press [TEST TONE].
Press F G to adjust the volume.
2 Setting the crossover frequency individually
for the different channels
3 Press ENTER.
1
2
Setting the Crossover Frequency
Set the frequency (Hz) below which the bass sound of
various speakers is to be output from the subwoofer.
For speakers that are set to “Small”, frequencies under
crossover frequency are cut before the signal is output, and
low frequency component that was cut is output from
subwoofer or the speakers that are set to “Large”.
the
the
the
the
• Set to “80 Hz” when using regular speakers. When using small
speakers, we recommend setting to a higher frequency.
• If “LFE” is selected at “Setting the Subwoofer Setup” (
page 57), the frequencies can only be selected for speakers set
to “Small” at “Setting the Speaker Configuration” (
page
56, 57).
Press D H to select “Crossover Frequency”, then
1 press
ENTER.
2 Press F G to set.
40, 60, 80, 90, 100, 110, 120, 150, 200, 250 Hz:
Set as desired according to your speakers’ bass playback
ability.
• If “LFE+Main” is set at “Setting the Subwoofer Setup” (
page 57), the frequencies can be selected regardless of the
speaker size setting.
Advanced:
The crossover frequency can be set individually for the
different speakers.
3 Press ENTER.
59
ENGLISH
ENGLISH
Advanced Setup – Part 2
Others Setup
Setting the Room Equalizer Setup
Advanced Setup – Part 2
1
Setting the Direct Mode Setup
2
3
Set the Room Equalizer setting with “All” or “Assign” for each
surround mode.
D H to select “Direct Mode Setup”, then
1 Press
press ENTER.
D H to select “Room EQ Setup”, then press
1 Press
ENTER.
2 Press F G to set, then press ENTER.
All:
Sets the equalizer for all surround modes.
Assign:
Sets the equalizer individually for each surround mode (
page 24).
Set the ON/OFF setting of Room Equalizer, in the case of the
surround mode is in “Direct” or “Pure Direct”.
2 Press F G to set.
• The equalizer setting of “Audyssey”, “Front” and “Flat” can be
selected after performing the Auto Setup.
• When the speaker set as “None” with the Auto Setup is
changed to on manually, the equalizer of “Audyssey”, “Front”
and “Flat” cannot be used.
• When headphones are connected, the Room Equalizer cannot
be used.
“All” is selected:
3 When
Press F G to set.
OFF:
The equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to correct the
effects of room acoustics.
Front:
Adjusts the frequency response of the surround speakers to
match the characteristics of the front channel speakers.
Flat:
Adjusts the frequency response of all speakers to the flattest
response. This mode is suitable for multi-channel music
surround sound sources.
Manual:
Selects the setting value that was set in the “Setting the
Manual Equalizer Setup” (
page 53, 54).
4 Press ENTER.
60
ENGLISH
ON, OFF:
Select “ON” to use the room equalizer, “OFF” if you do not
want to use it.
3 Press ENTER.
1
2
ENGLISH
Advanced Setup – Part 2
Advanced Setup – Part 2
Setting the MIC Input Select
Sets whether the setup microphone is connected to the pin jack
(V. AUX L channel) or mini jack (SETUP MIC).
Check the parameter
1
Press D H to select “Parameter Check”, then
press ENTER.
D H to select “Mic Input Select”, then press
1 Press
ENTER.
2 Press D H to select the item, then press ENTER.
2 Press F G to set.
Press D H to select “EQ Parameter Check”, then
3 press
ENTER.
For instructions on checking the results of each item (
page 12).
Mic:
Select this to use the included microphone.
Normally set to this setting.
V.Aux L:
Select this when using a microphone other than the one
included.
3
1
Press D H to select the type of equalizer, then
4 press
ENTER.
5 Press F G to select the speaker.
Press ENTER.
The display is only an approximate picture of the response
and that correction is happening at all frequencies.
2
1
4
2
3
5
61
ENGLISH
• To reset:
Press D H to select “Restore” at the “Parameter Check”
screen, then press F.
ENGLISH
Operating the remote control unit
Operating the remote control unit
[LEARNED/TX]
[POWER OFF]
[ON/SOURCE]
[MODE SELECTOR]
Operating DENON audio components
1
Press [MODE SELECTOR] or [MODE SELECT] for
the device to be operated.
• The button for the selected mode lights.
The mode switches as shown below each time [MODE
SELECT] is pressed:
CD
ZONE2
[MODE SELECT]
CDR/MD
TAPE
TV
DBS/CABLE
DVD/VDP
VCR
2 Operate the component.
For details, refer to the component’s operating instructions.
Setting the preset memory function
The various devices can be operated by setting the preset
memory on the included remote control unit.
For some models the remote control unit or the device may not
operate properly. In this case, use the learning function (
page 64) to store your device’s remote control signals in the
included remote control unit.
[ON/SOURCE] and [POWER OFF] at the
1 Press
same time.
• The “LEARNED/TX” indicator blinks.
• It may not be possible to use some of the buttons, depending
on the model and age of your equipment.
[MODE SELECTOR] for the device to be set
2 Press
in the preset memory.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
the (4-digit) number for the brand of the
3 Input
device to be set in the preset memory, as shown on
the list of preset codes (
End of this manual).
• When stored correctly, [MODE SELECTOR] and the
“LEARNED/TX” indicator lights.
62
ENGLISH
• There may be several preset codes for some brands. If the
remote control unit does not work properly with one code, try
inputting another code.
• Buttons that have been learned have priority over the signals
set with the preset memory function. If a learned button setting
is not needed, please erase it (
page 65).
NOTE:
• The preset memory can be set for one component only
among the following: CDR/MD, DVD/VDP and DBS/CABLE.
ENGLISH
Operating the remote control unit
Operating the remote control unit
Operating a component stored in the preset
memory
Press [MODE SELECTOR] for the device to be
1 operated.
2 Operate the component.
For details, refer to the component’s operating instructions.
2 Functions of buttons for the different devices
Device operated
CD player
CD recorder
or
MD recorder
Tape deck
Tuner
DVD player
or
Video disc player
Video deck
Satellite tuner
or Cable TV
TV
(Monitor)
MODE SELECTOR
CD
CDR / MD
TAPE
AMP (CD,
CDR/MD or TAPE)
DVD / VDP
VCR
DBS / CABLE
TV
ON / SOURCE
–
–
–
–
MODE
–
–
–
Auto/Manual
switching
–
–
–
–
MEMORY
–
–
–
Preset memory
–
–
–
–
BAND
–
–
–
AM/FM switching
–
–
–
–
SHIFT
–
–
–
Preset channel
selection
–
–
–
–
0 ~ 9, +10
–
–
–
–
Number input/
Track selection
–
Channels
Channels
TUNING /
TV VOL + –
–
–
–
Tuning
–
–
Volume control
Volume control
CHANNEL + –
–
–
–
Preset channel
selection
–
Station selection
Channel selection
Channel selection
ON/SOURCE
[MODE SELECTOR]
MODE, MEMORY,
BAND ,SHIFT
TUNING/TV VOL+ –
0 ~ 9, +10
TV/VCR
CHANNEL+ –
VCR CHANNEL + –,
8 9, A/B,
6 7, 3,
0, DISC SKIP+
SETUP
DHFG
DISPLAY
1
Play
Play
Play
–
Play
Play
–
–
2
Stop
Stop
Stop
–
Stop
Stop
–
–
–
–
–
–
VCR CHANNEL
+–/
1, 2,
8 9
ENTER
MENU
SEARCH/RETURN
Special remarks:
q It is only possible to set the preset memory for one device per mode.
When a new code is preset, the previous code is automatically
deleted.
w Note that the function names of the DVD buttons on the remote
control unit may differ for some brands. Check beforehand.
e The CD, VCR or DVD buttons can be assigned to a TV or satellite tuner
(or cable TV) (
page 65).
Power on/Standby Power on/Standby Power on/Standby Power on/Standby
Auto search (to
Auto search (to
beginning of track) beginning of track)
Auto search (to
Channel selection
beginning of track)
A/B
–
–
A/B switching
–
–
–
–
–
6 7
Manual search
(forward/reverse)
Manual search
(forward/reverse)
Fast forward/
Rewind
–
Manual search
(forward/reverse)
Manual search
(forward/reverse)
–
–
3
Pause
Pause
Pause
–
Pause
Pause
–
–
0
–
–
Reverse play
–
–
–
–
–
DISC SKIP +
Disc skip (for CD
changer only)
–
–
–
Disc skip (for DVD
changer only)
–
–
–
SETUP
–
–
–
–
Setup
–
–
–
MENU
–
–
–
–
Menu
–
Menu
Menu
DISPLAY
–
–
–
–
Display selection
–
Display selection
Display selection
RETURN /
SEARCH
–
–
–
RDS search
Return
–
Return
Return
DHFG
–
–
–
–
Cursor operation
–
Cursor operation
Cursor operation
ENTER
–
–
–
–
Enter
–
Enter
Enter
Input mode
selection
Input mode
selection
TV / VCR
–
–
–
–
–
Input mode
selection
Default setting
(preset code)
DENON
(0000)
DENON CDR
(0000)
DENON
(0000)
–
DENON DVD
(0000)
HITACHI
(3010)
ABC CABLE
(4007)
HITACHI
(4539)
Special remarks
q
q
q
q
q, w
q
q, e
q, e
63
ENGLISH
ENGLISH
Operating the remote control unit
[POWER OFF]
Operating the remote control unit
[ON/SOURCE]
3 Press the button to be set.
• The “LEARNED/TX” indicator stops blinking and [MODE
SELECTOR] lights.
If a button that cannot be learnt is pressed, [MODE SELECTOR]
and the “LEARNED/TX” indicator blinks.
the remote control units straight at each
4 Point
other and press and hold in the button on the
other remote control unit to be learnt on the
AVR-2807’s remote control unit.
Other remote control unit
1
Using the system call function
• A series of operations can be registered at a single button.
• This function makes it possible to for example turn the
amplifier’s power on, select the input source, turn the monitor
power’s on, turn the source device’s power on and start
playback, all by pressing a single button once.
• Up to 10 signals each can be stored at [SYSTEM CALL] (1 or 2).
Registering
Press [ON/SOURCE] and [POWER OFF] at the
1 same
time.
• The “LEARNED/TX” indicator blinks.
[ ]
[SYSTEM CALL 1] for which you want to
2 Press
register the operations.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
[SYSTEM CALL]
[USE/LEARN]
The AVR-2807’s remote control unit
(RC-1030)
[MODE SELECTOR] and the “LEARNED/TX”
the buttons you want to register in the
5 indicator
4 Press
lights, release the button on the other
order of the operations to be performed.
remote control unit.
Setting the learning function
• If your AV device is a brand other than DENON or if operation is
not possible using the preset memory function, the signals of a
remote control unit of that device can be stored in the AVR2807’s remote control unit.
• For some remote control units, it may not be possible to learn
the signals or the device may not operate properly after the
signals are learnt. In this case, use the remote control unit of
that device.
[USE/LEARN] with the tip of a pen etc., to
1 Press
set the learn mode.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
Press [MODE SELECTOR] for the device to be
2 operated.
Press [MODE SELECTOR] for the device to be
3 operated.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks
again.
Other buttons can be learnt by repeating steps 2 ~ 5.
6 Press [USE/LEARN].
Example: Press [ON].
↓
Press [CD] of [MODE SELECTOR].
↓
Press [1].
Repeat steps 3, 4 to register the desired buttons.
5 Press [SYSTEM CALL] (1 or 2).
• To cancel the learning function mode, press [USE/LEARN].
• If the codes could not be stored, the “LEARNED/TX” indicator
start flashing rapidly. For limited number of models, codes
cannot be stored in RC-1030.
• If [MODE SELECTOR] and the “LEARNED/TX” indicator start
flashing rapidly, this means that the memory is already full, and
the code you have just attempted to store was not stored.
To “learn” that code, first perform the resetting operation (
page 65).
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
64
ENGLISH
Operating
Press [SYSTEM CALL] (1 or 2) at which the operation
are registered.
• The stored signals are transmitted successively.
ENGLISH
Operating the remote control unit
Operating the remote control unit
Setting the punch through function
Resetting the remote control unit
CD, CDR/MD, TAPE, DVD/VDP or VCR mode buttons can be
assigned to unused TV and DBS/CABLE mode buttons.
For example, when CD mode operations are assigned to TV
mode buttons, the CD mode can be operated while in the TV
mode ( [ ] ).
Press [ON/SOURCE] and [POWER OFF] at the
1 same
time.
• The “LEARNED/TX” indicator blinks.
2
and
the
Press [MODE SELECTOR] for which punch
3 through
is to be set (TV or DBS/CABLE).
• [MODE SELECTOR] (CD, CDR/MD, TAPE, DVD/VDP or VCR)
and the “LEARNED/TX” indicator blinks.
4
[USE/LEARN] with the tip of a pen etc., to
1 Press
set the learn mode.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
[MODE SELECTOR] for the device to be
2 Press
reset.
• [MODE SELECTOR] and the “LEARNED/TX” indicator blinks.
Press [1].
• [MODE SELECTOR] (TV and DBS/CABLE)
“LEARNED/ TX” indicator blinks.
Resetting the learning function
Press [MODE SELECTOR] for the device to be
punched through (CD, CDR/MD, TAPE, DVD/
VDP or VCR).
for 4 seconds or longer [MODE SELECTOR]
3 Hold
of the equipment that is to be reset and
[ON/SOURCE].
• [MODE SELECTOR] and the“LEARNED/TX” indicator blinks
again.
4 Press [USE/LEARN].
• [MODE SELECTOR] that was set will lights.
Resetting the punch through setting
[ON/SOURCE] and [POWER OFF] at the
1 Press
same time.
• The “LEARNED/TX” indicator blinks.
2 Press [
1].
• [MODE SELECTOR] (TV or DBS/CABLE) and the “LEARNED/
TX” indicator blinks.
[MODE SELECTOR] (TV or DBS/CABLE)
3 Press
that is to be reset.
• [MODE SELECTOR] (CD, CDR/MD, TAPE, DVD/VDP or VCR)
and the “LEARNED/TX” indicator blinks.
[MODE SELECTOR] of the equipment that is
4 toPress
be reset again.
65
ENGLISH
ENGLISH
Additional Information
Additional Information
w When playing movies and musics
About the speakers
2 Number of surround back speakers
Surround back speakers
We recommend using 2 speakers.
When using dipolar speakers in particular, be sure to use 2
speakers.
Sound position directly to the rear can be achieved easily by
adding a surround back speaker to a 5.1-channel system.
In addition, the acoustic image extending between the sides and
the rear is narrowed, thus greatly improving the expression of the
surround signals for sounds moving from the sides to the back
and from the front to the point directly behind the listening
position.
Change of positioning and acoustic image
with 5.1-channel systems
FL
SW
C
2 Placement of the surround left and right
channels when using surround back speakers
We recommend installing the speakers for the surround “L” and
“R” channels a bit forward.
Front speakers
Center speaker
Monitor
Subwoofer
[ As seen from the side ]
45° ~ 60°
Surround
speaker
Surround
speakers
Surround back
speaker
Front speaker
Examples of speaker layouts
60 to 90 cm
Below we introduce examples of speaker layouts. Refer to these
to arrange your speakers according to their type and how you
want to use them.
FR
[As seen from above]
Point slightly
downwards
Surround back
speakers
[1] Using surround back speaker(s)
q When mainly playing movies
Recommended when your surround speakers are single or 2-way
speakers.
[2] When not using surround back speakers
[ As seen from above ]
SL ch
SR ch
Movement of acoustic
image from SR to SL
[As seen from above]
Front speakers
Center speaker
Front speakers
Center speaker
Change of positioning and acoustic image
with 6.1-channel systems
FL
SW
C
Monitor
Monitor
Subwoofer
FR
Subwoofer
[As seen from the side]
60°
SL ch
Surround speaker
Surround speaker Surround back
speaker
Surround
speakers
60 to 90 cm
60°
SB ch
Front speaker
Front speaker
SR ch
Movement of
acoustic image from
SR to SB to SL
[ As seen from the side ]
60°
60 to 90 cm
Point slightly
downwards
120°
Surround speakers
Surround back speakers
In addition to sources recorded in 6.1-channels, the surround
effect of conventional 2- to 5.1-channel sources can also be
enhanced.
66
ENGLISH
ENGLISH
Additional Information
Surround
The AVR-2807 is equipped with a digital signal processing circuit
that lets you play program sources in the surround mode to
achieve the same sense of presence as in a movie theater.
Dolby Surround
[1] Dolby Digital
Dolby Digital is the multi-channel digital signal format developed
by Dolby Laboratories.
A total of 5.1-channels are played: 3 front channels (“FL”, “FR”
and “C”), 2 surround channels (“SL” and “SR”) and the “LFE”
channel for low frequencies.
Because of this, there is no crosstalk between channels and a
realistic sound field with a “three-dimensional” feeling (sense of
distance, movement and positioning) is achieved.
A real, overpowering sense of presence is achieved when
playing movie sources in AV rooms as well.
Additional Information
DTS NEO:6 surround
DTS Digital Surround
DTS Digital Surround is a digital surround format developed by
Digital Theater Systems of the United States.
The number of playback channels and the playing band is the
same as for Dolby Digital (5.1-channels).
The compression rate of the audio data when it was recorded on
the medium is lower than for Dolby Digital, so there is more
information when the data is decoded, resulting in richer, clearer
sound quality.
MANUFACTURED UNDER LICENSE FROM DIGITAL
THEATER SYSTEMS, INC.
U.S. PAT. NO’S. 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535 AND OTHER U.S. AND WORLD–WIDE
PATENTS ISSUED AND PENDING.
“DTS”, “DTS–ES”, “Neo:6”, AND “DTS 96/24” ARE
TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. ©
1996, 2003 DIGITAL THEATER SYSTEMS, INC. ALL RIGHTS
RESERVED.
[2] Dolby Pro LogicII
Dolby Pro LogicII is a matrix decoding technology developed by
Dolby Laboratories. Regular music such as that on CDs is
encoded into 5 channels to achieve an excellent surround effect.
The surround channel signals are converted into stereo and full
band signals (with a frequency response of 20 Hz to 20 kHz or
greater) to create a “three-dimensional” sound image offering a
rich sense of presence for all stereo sources.
[3] Dolby Pro LogicIIx
Dolby Pro LogicIIx is a further improved version of the Dolby Pro
LogicII matrix decoding technology.
Audio signals recorded in 2 channels are decoded to achieve a
natural sound with up to 7.1-channels.
There are 3 modes: “Music” suited for playing music, “Cinema”
suited for playing movies, and “Game” which is optimum for
playing games.
2 Sources recorded in Dolby Surround
Sources recorded in Dolby Surround are indicated with the
following logo marks.
Dolby Surround support mark:
DTS-ES™
DTS-ES is a new surround format developed by Digital Theater
Systems.
A sound image and sense of positioning can be achieved by
adding a surround back (“SB”) channel to the conventional 5.1channels.
DTS-ES™ Discrete 6.1:
This is the latest format, in which all 6.1-channels, including the
“SB” channel, are recorded independently. Since the different
channels are independent, the sound can be designed with
total freedom.
DTS-ES™ Matrix 6.1:
With this format, the “SB” channel is matrix-encoded and
inserted into the “SL” and “SR” channels, then decoded for
the “SL”, “SR” and “SB” channels upon playback. This
achieves a surround sound more faithful to the artist’s sound
design intentions than with conventional 5.1- or 6.1-channel
systems.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
67
ENGLISH
This is a matrix decoding technology for 6.1-channel surround
playback of 2-channel sources.
The optimum decoding for the type of signal source to be played
can be selected. There are 2 modes.
DTS NEO:6 CINEMA:
This mode is suited for playing movies. It achieves the same
type of sound as in a movie theater, even with 2 channels.
DTS NEO:6 MUSIC:
This mode is suited for playing music. A natural sense of
expansion is added to the sound field.
DTS 96/24
DTS 96/24 is a multi-channel digital signal format developed by
Digital Theater Systems.
The sampling frequency is raised to achieve 5.1-channel playback
with high quality sound (sampling frequency: 96 kHz,
quantization: 24 bits).
ENGLISH
Additional Information
Audyssey MultEQ XT
Audyssey MultEQ XT is a technology designed to provide the
optimum listening environment for multiple listeners within the
listening area. Test data collected from multiple listening points is
analyzed comprehensively and equalization that improves the
sound quality for the entire listening area is performed.
Audyssey MultEQ XT not only corrects frequency response
problems in large listening areas, it also fully automates the
surround system setup.
For a detailed description, see page 9.
• Audyssey MultEQ XT is a trademark of Audyssey Laboratories.
It is licensed under US and National Patent Applications
20030235318 and 10/700,220. Additional U.S. and Foreign
Patents pending. MultEQ and the Audyssey MultEQ logo are
trademarks of Audyssey Laboratories, Inc.. All rights reserved.
Additional Information
AL24 Processing Plus
AL24 Processing Plus is an analog waveform reproduction
technology compatible with sampling frequencies of 192 kHz.
This brings the sound closer to that of analog waveforms and
improves the ability to play sound at low volumes with
reverberations that are normally absorbed by the hall.
HDMI (High Definition Multimedia Interface)
HDMI is a digital interface standard for next generation TVs
based on DVI (Digital Visual Interface) standards and optimized
for use in consumer equipment.
Non-compressed digital video and multi-channel audio signals are
transmitted with a single connection.
HDMI is also compatible with HDCP (High-bandwidth Digital
Contents Protection), a technology for protecting copyrights that
encrypts digital video signals in the same was as with DVI.
• “HDMI”, “
” and “High-Definition Multimedia
Interface” are trademarks or registered trademarks of HDMI
Licensing LLC.
68
ENGLISH
ENGLISH
Troubleshooting
Symptom
Troubleshooting
No test tones
produced.
If a problem should arise, first check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the Operating Instructions?
3. Are the speakers and other components operating properly?
If this unit is not operating properly, check the items listed in the table below. Should the problem
persist, there may be a malfunction. Disconnect the power immediately and contact your store of
purchase.
Symptom
Display not lit and
sound not produced
when POWER switch
set to on.
Display lit but sound
not produced.
Cause
Measures
22
• Speaker cables not securely
connected.
• FUNCTION knob position is not
appropriate.
• Volume control set to minimum.
• MUTING is on.
• No digital signal is being input.
• Connect securely.
7
• Switch to the proper position.
23
• Turn volume up to suitable level.
• Switch off MUTING.
• Properly select a digital signal
input source.
23
24
47
• AVR-2807’s video output terminals • Check that the connections are
8,
and monitor’s input terminals are
correct.
13 ~ 22
not properly connected.
• Monitor’s input setting is wrong.
• Set the monitor’s input selector to
—
the terminals to which video
Nothing is displayed on
signals are connected.
monitor.
• The PURE DIRECT mode is set.
• Set a surround mode other than
25
the PURE DIRECT mode.
• Player connected with component • Down-conversion is not possible
—
terminal, TV connected with video
for progressive video signals.
terminal (yellow) or S-Video
Make the interlace settings on the
terminal.
player.
No DTS sound is
produced.
• DVD player’s audio output setting • Make the DVD player’s default
is not set to bit stream.
settings.
• DVD player is not DTS-compatible. • Use a DTS-compatible player.
• AVR-2807’s input setting is set to • Set to “AUTO” or “DTS”.
analog
• Copying between a source such as • Copying is not possible.
DVD and a VCR is not usually
possible, as DVDs are often
encoded with copy-protection
signals that prevent VCR recording.
—
Copying from DVD to
VCR is not possible.
• Subwoofer’s power is not on.
• Subwoofer’s initial setting is set to
“NO”.
• Subwoofer’s output is not
connected.
• The subwoofer’s channel volume
level is set to “OFF”.
—
57
No sound is produced
from subwoofer.
• Turn on the power.
• Set the setting to “YES”.
• Connect properly.
• Turn the subwoofer’s channel
volume level up.
—
23
7, 22
Page
• Surround mode
“STEREO”.
is
set
to • Set to a mode
“STEREO”.
other
—
than
—
• Replace with new batteries.
• Move closer.
3
3
• Remove obstacle.
3
• Press the proper button.
• Insert batteries properly.
—
3
This unit does not
operate properly when
remote control unit is
used.
• Batteries dead.
• Remote control unit too far from
this unit.
• Obstacle between this unit and
remote control unit.
• Different button is being pressed.
• < and > ends of batteries inserted
in reverse.
An image is not
projected with an
HDMI connection.
• AVR-2807’s
HDMI
output • Check the HDMI connection.
terminals and monitor’s input
terminals are not properly
connected.
• No HDMI signal is being input.
• Properly select HDMI signal input
source.
• The connected monitor equipment • The AVR-2807 will not output
or other equipments do not
video signal unless the other
support HDCP.
equipment supports HDCP.
• The output format of the • Check whether the output format
connected player (HDMI FORMAT)
of the connected player (HDMI
does not match the supported
FORMAT) matches the supported
input format of connected monitor
input format of connected monitor
equipments.
equipments.
19
49, 50
19
19
• The AVR-2807 does not play HDMI • Set the HDMI audio playback
audio signals.
setting at the “HDMI In Assign”
settings to “AMP”.
• The HDMI audio signals are not • Set the HDMI audio playback
output from the connected
setting at the “HDMI In Assign”
monitor device.
settings to “TV”.
49
• The set’s internal temperature has • Put the AVR-2807 in a wellrisen and the protection circuit has
ventilated place.
been activated.
• Turn off the power, then wait for
the set to fully cool off before
Power has turned off
turning the power back on.
and the power
• The core wires of the speaker • Check the connections of all the
indicator is blinking red.
cables are touching each other or
speaker cables.
the AVR-2807’s rear panel,
activating the protection circuit.
• AVR-2807 is malfunctioning.
• Turn off the power and contact a
DENON customer service center.
7
The HDMI audio is not
output.
—
Measures
are • Surround mode is set to a mode • Set to Dolby/DTS Surround.
other than Dolby/DTS Surround.
No sound is produced
from surround
speakers.
Page
• Power supply cord not plugged in • Check the insertion of the power
securely.
supply cord plug.
Cause
49
7
7
7
Sound is only produced
from the center
speaker.
• You are playing a monaural source • When playing monaural sources,
(TV, AM radio broadcast, etc.) in
select a surround mode other than
the DOLBY/DTS SURROUND
DOLBY/DTS SURROUND mode.
mode.
32, 33
• DVD player’s digital audio output • Check the DVD player’s audio
setting is not proper.
output setting.
For details, see the DVD player’s
operating instructions.
—
“DOLBY DIGITAL” is
not displayed.
34
69
ENGLISH
ENGLISH
Specifications
Specifications
2 Audio section
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
2 Video section
• Standard video terminals
Input / output level and impedance:
Frequency response:
• S-Video terminals
Input / output level and impedance:
Front (A, B):
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
110 W + 110 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
120 W x 2 ch (8 Ω/ohms)
170 W x 2 ch (4 Ω/ohms)
Front:
A or B
6 ~ 16 Ω/ohms
A+B
8 ~ 16 Ω/ohms
Center, Surround, Surr. Back 6 ~ 16 Ω/ohms
Frequency response:
• Color component video terminal
Input / output level and impedance:
Frequency response:
2 Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
S/N (IHF-A):
Total Harmonic Distortion (at 1 kHz):
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
PB/CB signal — 0.7 Vp-p, 75 Ω/ohms
PR/CR signal — 0.7 Vp-p, 75 Ω/ohms
5 Hz ~ 100 MHz — +0, –3 dB
[FM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
87.5 MHz ~ 108.0 MHz
1.0 µV (11.2 dBf)
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
MONO
77 dB
STEREO
72 dB
MONO
0.15%
STEREO
0.3%
[AM]
522 kHz ~ 1611 kHz
18 µV
2 General
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 8 V
Distortion factor:
0.03% (1 kHz, 3 V)
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
AC 230 V, 50 Hz
500 W
1 W Max (Standby)
434 (W) x 171 (H) x 429 (D) mm
14.0 kg
2 Remote control unit (RC-1030)
Batteries:
External dimensions:
Mass:
R6P/AA Type (3 batteries)
58 (W) x 230 (H) x 37 (D) mm
230 g (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
70
ENGLISH
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
2 List of preset codes / Liste von voreingestellten Codes / Liste de codes préréglés / Lista dei codici pre-regolati /
Lista de códigos pre-ajustados / Lijst van vooringestelde codes / Förteckning över förinställda koder
CD
ADC
0004
DKK
0001
Magnavox
0023, 0044
Quasar
0006
DMX Electronics
0023
Marantz
0006, 0023, 0030
RCA
0002, 0007, 0011, 0021,
Acoustic Research 0048
Denon
0000
Matsui
0023
Adcom
0021, 0038
Dual
0034, 0035
McIntosh
0042
Radiotone
0029, 0044, 0053, 0066
Aiwa
0003, 0018, 0023
Dynamic Bass
0029
Memorex
0021, 0024, 0028, 0030,
Realistic
Akai
0022
EEC
0034
Alba
0058
Eclipse
0059
Meridian
0023
Revox
0023
Alto
0059
Elektra
0046, 0051
Micromega
0023
Roadstar
0052
Arcam
0023
Emerson
0021, 0024, 0044, 0054
Miro
0001
Rotel
0023, 0048
Ariston
0059
Fisher
0014, 0027, 0029, 0045
Mission
0023
Royal
0048
Audio Alchemy
0034
GE
0002
Mitsubishi
0022
SAE
0023
Audio Pro
0051
Garrard
Audio Research
0023
Audio-Technica
0025
AudioTon
0023
Audiolab
0023
Audiomeca
0023
BSR
0034, 0039
0044
0058, 0059
0021, 0024, 0028, 0029,
0030, 0048
0039, 0041, 0046, 0048,
Myryad
0023
STS
0004
0049
NAD
0001
Sansui
0023, 0036, 0044, 0059
Gemini
0059
NEC
0010, 0038
Sanyo
0013, 0029, 0045
Genexxa
0007, 0024, 0044, 0050
NSM
0023
Schneider
0058
GoldStar
0047
Nagaoka
0004
Scott
0021, 0024, 0044
Goodmans
0039, 0041, 0044, 0058,
Naim
0023
Sears
0044
0059
Nakamichi
0020
Sharp
0009, 0030
0023
Nikko
0024, 0025, 0027, 0059
Sherwood
0030, 0035, 0050
Bestar
0024
Grundig
Burmester
0048
HCM
0059
Onkyo
0016
Shure
0010
Bush
0039, 0058
Harman/Kardon
0023, 0026, 0050
Optimus
0001, 0007, 0009, 0013,
Sonic Frontiers
0023
CDC
0048
Hiro
0059
0019, 0028, 0029, 0034,
Sony
0001, 0056, 0057
CEC
0027
Hitachi
0007, 0021
0035, 0041, 0044, 0045,
Soundesign
0019, 0049
Cairn
0023
IR
0001
0048, 0050, 0051, 0053
SuperTech
0059
Inkel
0030, 0035, 0051
PMG
0024
Synergy
0059
0006, 0043
JVC
0012, 0061, 0064
Panasonic
0006, 0043, 0065
Tandy
0007
Cambridge
0059
Kenwood
0005, 0008, 0009, 0033
Parasound
0034, 0048
Tascam
0048
Carrera
0034
Kodak
0042
Philips
0023, 0042
Teac
0027, 0030, 0046, 0048,
Carver
0023, 0029, 0051
Krell
0023
Pink Triangle
0059
Condor
0024
Kyocera
0004
Pioneer
0007, 0044, 0053
Technics
0006, 0037, 0043
Craig
0058
LXI
0044
Polk Audio
0023
Thomson
0011
Crown
0017
Linn
0023
Poppy
0024
Thorens
0023
Cyrus
0023
Luxman
0015
Proton
0023
Universum
0011, 0023, 0051
DAK
0039
MCS
0006, 0010
QED
0023
Vector Research
0034, 0047
DBX
0040
MTC
0048, 0059
Quad
0023
Victor
0012
California Audio Labs
1
PRESET CODE
0058, 0059
ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
0011, 0023
Amstrad
3550
Einhell
Watson
0058
Anglo
3533
Yamaha
0008, 0025, 0032
Ankaro
3533
Yorx
0052
Armstrong
3510
Zenith
0058
Asat
3507
Astacom
3528
Astra
3510, 3521
Wards
FRANCAIS
MD
NEDERLANDS
SVENSKA
3510, 3533
InVideo
3556
Elta
3507
Indovision
3559
Emme Esse
3529, 3556
Intertronic
3510
Engel
3533
Intervision
3521, 3524
Eurocrypt
3516
JOK
3531
Eurosat
3510
JVC
3520, 3543
Eurosky
3510, 3521
K-SAT
3533
BSR
1000
Astro
3506
Eurostar
3529, 3564, 3565
Kathrein
3506, 3507, 3523, 3527
Condor
1000
Athena
3528
Expressvu
3543
Kreiselmeyer
3506
Denon
1111
Axiel
3528
FTE
3554
La Sat
3521
Denver
1003
BT
3528, 3531
Fenner
3528
Lenco
3533
JVC
1015
Bestar
3510
Ferguson
3532
Lifesat
3533
Kenwood
1004, 1005, 1012
Blaupunkt
3506
Finlandia
3516
Loewe
3510
Luxman
1009
Boca
3510
Finlux
3516
Lorenzen
3521, 3538
Onkyo
1007
British Sky Broadcasting
Optimus
1013
Foxtel
3558
Magnavox
3535, 3537
3550
Fracarro
3556
Manata
3531
Orion
1011
Broco
3533
Fuba
3506
Manhattan
3516
Pioneer
1013, 1017
Bubu Sat
3533
GE
3519
Marantz
3507
Schneider
1000
Canal Digital
3551
Galaxis
3512, 3554
Maspro
3540
Sharp
1006
Canal Satellite
3551
Gardiner
3546
Matsui
3520
Sherwood
1014
Canal+
3551
General Instrument 3555
Max
3521
Sony
1001, 1002
Chaparral
3508
Gold Box
3551
MediaSat
3551
Technics
1016
CityCom
3501, 3546
Gooding
3520
Mediamarkt
3510
Universum
1018
Colombia
3528
Goodmans
3516
Medion
3533
Yamaha
1008
Columbia
3502
Gradiente
3559
Mega
3507
Columbus
3528
Granada
3516
Memorex
3537
Condor
3521
Grundig
3506, 3520, 3540, 3550
Metronic
3510
DBS
ABsat
3549
Conrad
3501, 3521
HTS
3543
Metz
3506
AGS
3528, 3531
Crown
3510
Helium
3521
Micro
3533
ASLF
3533
Cyrus
3507
Hirschmann
3506, 3568
Micro Elektronic
3533
Akai
3507
D-box
3536
Hitachi
3516, 3547
Microtec
3533
Akena
3528
DNT
3507
Houston
3528
Minerva
3520
Alba
3516
Daewoo
3533
Hughes Network Systems
Mitsubishi
3539
Allsat
3507
Discovery
3531, 3528
3539, 3574, 3575
Morgan’s
3502, 3510
Alltech
3533
Dynasat
3529
Humax
3554
Multichoice
3526, 3558
Alpha
3528
EP Sat
3516
Huth
3510
Myryad
3507
AlphaStar
3542
Echostar
3505, 3513, 3518, 3533,
IR
3506, 3516
Mysat
3533
Amitronica
3533
3543, 3551, 3556, 3560,
ISkyB
3559
Netsat
3559
3569
2
PRESET CODE
SVENSKA
NEDERLANDS
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
3533
SM Electronic
3533
Toshiba
Neusat
3533
Saba
3531
Triax
3501
Next Level
3555
Sabre
3516
Uniden
3535, 3537
Anam National
3023, 3028, 3036, 3050
Nikko
3533
Sagem
3548, 3572
Unisat
3507, 3510
Anitech
3017
Nokia
3516, 3536, 3541, 3557,
Samsung
3571
Universum
3506, 3520
Ansonic
3002
3533
Neuhaus
3539, 3544
Anam
3006, 3023, 3028, 3029,
3030
3563, 3573
Sat Team
VTech
3546
Aristona
3018
Nordmende
3516
Satec
3533
Variosat
3506
Asha
3029
Okano
3510, 3528
Satline
3524
Ventana
3507
Asuka
3006
Orbit
3562
Schneider
3528
Vestel
3538
Audiosonic
3030
Oxford
3528
Seemann
3510
Wela
3533
Audiovox
3006
Pace
3509, 3516, 3517, 3534,
Seleco
3556
Wewa
3516
Baird
3000, 3009, 3019
Wisi
3506, 3516
Basic Line
3017, 3030
3029
3545, 3550, 3559
Siemens
3506
Palladium
3520
Skantin
3533
World Sat
3531
Beaumark
Panasat
3522, 3558
Sky Television
3561
XSat
3528
Bell & Howell
3019
Panasonic
3511, 3530, 3550
Skymaster
3524, 3533
Xcom Multimedia
3528
Bestar
3030
Panda
3516
Skymax
3507
Zehnder
3500, 3546
Blaupunkt
3023, 3025, 3028
Patriot
3528
Smart
3502
Zenith
3553
Blue Sky
3030
Philips
3503, 3507, 3516, 3520,
Sony
3525, 3550
Zeta Technology
3507
Bondstec
3017
3531, 3535, 3537, 3539,
Star
3559
Zwergnase
3510
Brandt
3032
3540, 3551, 3567, 3574
Star Choice
3555
Brandt Electronic
3009
Pioneer
3514, 3551
Strong
3502, 3558
VCR
Prima
3545
Sumida
3510
ASA
Profile
3531
Sunsat
3533
AVP
3034
Bush
3017, 3026, 3030, 3034
Promax
3516
Sunstar
3510
Adelsound
3002
CCE
3017, 3030
Prosat
3524
Super Sat
3529
Admiral
3014, 3026
CGE
3000
Proscan
3515
TPS
3548
Adventura
3000
Calix
3006
Pye
3520
Tantec
3516
Adyson
3017
Canon
3005
Quadral
3524
Tatung
3516
Aiko
3030
Carena
3026
Quelle
3521
Technisat
3570
Aiwa
3000, 3006, 3033, 3034
Carrefour
3012
RCA
3504, 3515, 3519, 3552
Technowelt
3521
Akai
3009, 3020, 3031
Carver
3018
RFT
3507
Teco
3510
Akiba
3017
Cathay
3030
Radio Shack
3555
Teleka
3510
Akura
3017
Cimline
3017
Radiola
3507
Telestar
3500
Alba
3017, 3026, 3030, 3031,
Cineral
3030
Roadstar
3533
Televes
3516
3034
Citizen
3006, 3030
Rover
3524, 3533
Televisa
3559
Allstar
3018
Colt
3017
SEG
3538
Thomson
3516, 3532, 3551, 3566
America Action
3030
Combitech
3034
SKR
3533
Thorn
3516
American High
3005
Condor
3030
SKY
3553, 3559
Tonna
3528
Amstrad
3000, 3030
Craig
3006, 3013, 3017, 3029
3
PRESET CODE
Broksonic
3001, 3021, 3024, 3026,
3033, 3037
3006, 3018
ENGLISH
DEUTSCH
Crown
FRANCAIS
ITALIANO
3017, 3030
ESPAÑOL
GE
NEDERLANDS
SVENSKA
3005, 3014, 3015, 3029,
Imperial
3000
Marta
3006
3044
Ingersol
3002
Matsui
3002, 3026, 3033, 3034
3044
GEC
3018
Inno Hit
3017, 3029
Matsushita
3005, 3023, 3036
Cybernex
3029
Galaxis
3030
Interfunk
3018
Medion
3033
Cyrus
3018
Garrard
3000
Intervision
3000, 3006, 3026, 3030
Memorex
3000, 3005, 3006, 3008,
Daewoo
3012, 3030, 3043
General Technic
3033
Irradio
3017, 3018
3013, 3014, 3019, 3023,
Dansai
3017
Genexxa
3019
JVC
3009, 3016
3026, 3029, 3033, 3036,
De Graaf
3010
Go Video
3035
Jensen
3009
Decca
3000, 3018
GoldHand
3017
KEC
3006, 3030
Memphis
Denon
3010
GoldStar
3006, 3007, 3027
KLH
3017
Metz
Diamant
3006
Goodmans
3000, 3006, 3017, 3030
Kaisui
3017
Domland
3026
Gradiente
3000
Kendo
3020, 3026
Minerva
3025
Dual
3009
Graetz
3009, 3019, 3029
Kenwood
3007, 3009, 3016
Minolta
3010
Dumont
3000, 3018, 3019
Granada
3018, 3019
Kimari
3013
Mitsubishi
3011, 3014, 3016, 3018
Dynatech
3000
Grandin
3000, 3006, 3017
Kneissel
3034
Motorola
3005, 3014
ESC
3029, 3030
Grundig
3017, 3018, 3025, 3028
Kodak
3005, 3006
Multitech
3000, 3017
Elbe
3007
HCM
3017
Korpel
3017
Murphy
3000
Elcatech
3017
HI-Q
3013
Kuba Electronic
3013
Myryad
3018
Electrohome
3006
Hanimex
3034
Kyoto
3017
NAD
3019
Electrophonic
3006
Hanseatic
3006
LXI
3006
NAP
3008
Elin
3029
Harley Davidson
3000
Lenco
3030
NEC
3007, 3009, 3016, 3019
Elsay
3017
Harman/Kardon
3007, 3018
Leyco
3017
National
3028
Elta
3017, 3030
Harwood
3017
Lloyd’s
3000
Neckermann
3018
Emerex
3003
Hinari
3002, 3017, 3029, 3034
Loewe
3002, 3006, 3018, 3023,
Nesco
3017
Emerson
3000, 3001, 3006, 3011,
Hisawa
3034
3036, 3050
Nikkai
3017, 3030
3021, 3024, 3026, 3030,
Hischito
3012
Logik
3002, 3017, 3029
Nikko
3006
3037
Hitachi
3000, 3002, 3009, 3010,
Luxor
3011, 3014, 3019, 3020
Noblex
3029
3029
M Electronic
3000, 3007
Nokia
3009, 3019, 3020, 3029
3018
MEI
3005
Nordmende
3009, 3032
Curtis Mathes
3005, 3009, 3015, 3023,
Ferguson
3009, 3032
Fidelity
3000
Hornyphone
Finlandia
3018, 3019
Hughes Network Systems
Finlux
3000, 3010, 3018, 3019
Firstline
3037, 3046, 3050, 3052
3017
3006, 3023, 3025, 3036,
3050
MGA
3011, 3029
Oceanic
3000, 3009
3010
MGN Technology
3029
Okano
3031, 3033
3006, 3011, 3012, 3017,
Hypson
3017
MTC
3000, 3029
Olympus
3005, 3028
3026
IR
3002, 3009, 3010, 3012,
Magnasonic
3030
Optimus
3006, 3014, 3019, 3023,
Magnavox
Fisher
3013, 3019
3013, 3017, 3018, 3019,
Flint
3026
3020, 3026, 3028, 3029,
Fuji
3004, 3005
3033
Magnin
3029
Fujitsu
3000
ITT
3009, 3019, 3020, 3029
Manesth
3012, 3017
Funai
3000
ITV
3006, 3030
Marantz
3005, 3018
4
PRESET CODE
3000, 3005, 3008, 3018,
3035, 3036, 3047, 3048,
3022, 3038
3050, 3052
Orion
3001, 3002, 3021, 3024,
3026, 3033, 3034, 3037
Osaki
3000, 3006, 3017
SVENSKA
Otake
3026
Realistic
Otto Versand
3018
Palladium
3006, 3009, 3017
ReplayTV
NEDERLANDS
3000, 3005, 3006, 3013,
Sonneclair
3014, 3019
3039, 3040
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
3017
Ultravox
3030
Sontec
3006
Unitech
3029
Sony
3000, 3003, 3004, 3005,
Universum
3000, 3006, 3018, 3020,
3005, 3023, 3027, 3028,
Rex
3009
3036, 3040, 3048, 3050,
Roadstar
3006, 3017, 3029, 3030
Soundwave
3052, 3053
Runco
3008
3002, 3011
SBR
3018
Pathe Marconi
3009
SEG
Penney
3005, 3006, 3007, 3010,
SEI
3029
STS
3010
Saba
Perdio
3000
Saisho
3002, 3026
Supra
3006
Philco
3005, 3007, 3026, 3037
Salora
3011, 3020
Sylvania
3000, 3005, 3011, 3018
Watson
Philips
3005, 3018, 3038, 3041,
Samsung
3012, 3029, 3035
Symphonic
3000
White Westinghouse
Panasonic
Pathe Cinema
Pentax
ENGLISH
3025, 3029
3042, 3045
3006, 3026
Vector
3012
Ssangyong
3017
Vector Research
3007
Stern
3030
Victor
3009, 3016
3029
Sunkai
3033
Video Concepts
3012
3002, 3018
Sunstar
3000
Videosonic
3029
3010
Suntronic
3000
Wards
3009, 3032
Sunwood
3017
3000, 3005, 3010, 3013,
3014, 3015, 3017, 3018,
3022, 3029, 3044
3018
3049, 3051
Sanky
3008, 3014
TMK
3029
Phonola
3018
Sansui
3000, 3009, 3016, 3026,
Taisho
3002, 3026
XR-1000
Pilot
3006
3037
Tandberg
3030
Yamaha
3007
Pioneer
3016, 3018
Sanwa
3002
Tandy
3000, 3019
Yamishi
3017
Polk Audio
3018
Sanyo
3013, 3019, 3029
Tashiko
3000
Yokan
3017
Portland
3030
Saville
3034
Tatung
3000, 3009, 3018
Yoko
3029
Pro Vision
3030
Schaub Lorenz
3000, 3009, 3019
Teac
3000, 3009, 3030, 3043
Zenith
Profitronic
3029
Schneider
3000, 3017, 3018
Tec
3017, 3030
Proline
3000
Scott
3011, 3012, 3021, 3024
Tech Line
3017
Proscan
3015, 3044
Sears
3000, 3005, 3006, 3010,
Technics
3005, 3023, 3028
CDR
Prosonic
3030
3013, 3019
Teknika
3000, 3005, 3006
Denon
0000, 0001
Protec
3017
Seleco
3009
Teleavia
3009
HHB
0500
Pulsar
3008
Semp
3012
Telefunken
3009, 3032
Kenwood
0501
Pye
3018
Sentra
3017
Teletech
3017
Marantz
0501
Quasar
3005, 3023, 3036, 3050
Sharp
3014
Tenosal
3017
NAD
0503
Quelle
3018
Shintom
3017, 3019
Tensai
3000
Philips
0501
RCA
3005, 3010, 3014, 3015,
Shivaki
3006
Thomas
3000
Pioneer
0500, 0502
RCA
0502
3017, 3026, 3030
3000, 3005, 3017
3000, 3004, 3008, 3026,
3037
3020, 3022, 3029, 3044
Shogun
3029
Thomson
3009, 3015, 3016, 3032
RFT
3017
Shorai
3002
Thorn
3009, 3019
Radialva
3006, 3014
Siemens
3006, 3018, 3019, 3025
Tivo
3041, 3042
CABLE
Radio Shack
3000, 3046
Siera
3018
Tokai
3017
ABC
4001, 4002, 4005, 4006
Radiola
3018
Silva
3006
Toshiba
3009, 3011, 3012, 3018
Alcatel
4028, 4029
Radix
3006
Singer
3012, 3017
Totevision
3006, 3029
Americast
4030
Randex
3006
Sinudyne
3002, 3018
Uher
3029
Bell & Howell
4005
5
PRESET CODE
ENGLISH
DEUTSCH
Bell South
FRANCAIS
ITALIANO
ESPAÑOL
Starcom
4001
4030
NEDERLANDS
SVENSKA
Amstrad
4502, 4514, 4549, 4550,
Boots
4564
Supercable
4012
4579, 4581
Bradford
4553
4012
Tele+1
4017
Anam
4501, 4502, 4553, 4568
Brandt
4536, 4575
British Telecom
4001
Tocom
4004
Anam National
4522, 4568, 4605
Brinkmann
4512, 4582
Cable & Wireless
4034
Toshiba
4000
Anglo
4569
Britannia
4563
Cabletime
4018, 4024
United Cable
4001
Anitech
4502
Brockwood
4508
Daeryung
4002
Videoway
4010
Ansonic
4502, 4514, 4578
Broksonic
4501, 4567, 4585
Filmnet
4017
Visionetics
4033
Arcam
4563, 4564
Bush
France Telecom
4019, 4028, 4029
Visiopass
4019
Archer
4501
Galaxi
4002
Zenith
4000, 4022, 4030
Aristona
4514, 4593
Asora
4502
CCE
4514, 4564
Birmingham Cable Communications
General Instrument 4020, 4025
4502, 4513, 4514, 4565,
4571, 4572, 4576, 4579,
4580, 4607
GoldStar
4008
TV
Asuka
4565
CGE
4578, 4582
Hamlin
4003, 4011
A-Mark
4501
Atlantic
4561
CS Electronics
4563
Jerrold
4001, 4004, 4005, 4012,
A.R. Systems
4593
AudioTon
4564, 4569
CXC
4553
4020, 4025
AOC
4501, 4508, 4512, 4519,
Audiosonic
4514, 4536
Candle
4512, 4516, 4523, 4555
4554
Audiovox
4501, 4530, 4553, 4583,
Canton
4565
4599
Carad
4598
4561
Carena
4514, 4584
MNet
4017
Macab
4026
AWA
4502
Memorex
4000
Acura
4502
Autovox
Motorola
4020, 4035
Admiral
4531, 4545, 4585
BPL
4571
Carnivale
4512
Mr. Zap
4036
Adventura
4516
BSR
4572
Carrefour
4513
Noos
4026
Adyson
4564
BTC
4565
Carver
4521, 4548
Ono
4034
Aiko
4530
Baird
4526, 4527, 4557, 4558,
Cascade
4502
PVP Stereo Visual Matrix
4001
Aiwa
4612
4562, 4564
Cathay
4514
Akai
4502, 4512, 4562, 4565,
Basic Line
4502, 4565
Celebrity
4500
4596
Baur
4514, 4590, 4592
Centurion
4514
Pace
4009, 4032, 4034
Panasonic
4000, 4007
Akib
4572
Baysonic
4553
Cimline
4502
Paragon
4000
Akiba
4514, 4565, 4571, 4572,
Bazin
4564
Cineral
4530, 4583
4584
Beaumark
4551
Citizen
4565, 4569
Beko
4578, 4615
4512, 4515, 4516, 4523,
Philips
4015, 4016
Pioneer
4008, 4023, 4027, 4037
Akura
Pulsar
4000
Alaron
4552, 4563
Belcor
4508
City
4502
Quasar
4000
Alba
4502, 4513, 4514, 4565,
Bell & Howell
4505, 4542
Clairtone
4554
Regal
4011, 4014
4579, 4607
Beon
4514
Clarivox
4514
Runco
4000
Allorgan
4572
Best
4578
Clatronic
4578
Sagem
4026
Allstar
4514
Bestar
4514, 4578, 4580
Concerto
4523
Samsung
4008
Ambassador
4550
Binatone
4564
Condor
4578
Scientific Atlanta
4002, 4006, 4013, 4021,
America Action
4553
Blaupunkt
4560, 4573, 4574
Contec
4502, 4513, 4553, 4554,
4027, 4037
Amplivision
4564
Blue Sky
4565, 4607
4031
Ampro
4619
Blue Star
4571
Sony
6
PRESET CODE
4524, 4530, 4555, 4570
4563
Continental Edison 4536, 4588
SVENSKA
Cosmel
4514
Emerson
NEDERLANDS
4508, 4515, 4542, 4550,
GE
ESPAÑOL
ITALIANO
FRANCAIS
4510, 4511, 4517, 4518,
Hema
DEUTSCH
ENGLISH
4502, 4564
Craig
4553
4551, 4552, 4553, 4554,
4522, 4531, 4538, 4551,
Hikona
4565
Crosley
4521
4567, 4570, 4571, 4585,
4571, 4583, 4618, 4622,
Hinari
4502, 4513, 4514, 4552,
Crown
4599, 4600
4502, 4514, 4515, 4553,
4578, 4582
Emperor
4626
4571
GEC
4565
4514, 4526, 4564
Hisawa
Hitachi
4571, 4584
4505, 4512, 4515, 4517,
Envision
4512
GPM
4565
4518, 4521, 4523, 4524,
Erres
4504, 4514
Galaxi
4514
4531, 4539, 4542, 4547,
Etron
4502
Galaxis
4514, 4578
4583, 4586, 4618, 4622,
Euromann
4514, 4569
Geloso
4502
Hornyphone
4514
4626
Europa
4514
General
4555
Huanyu
4563, 4580
4565
Europhon
4564
General Technic
4502
Hyper
4502, 4563, 4564
DER
4557, 4558
Expert
4561
Genexxa
4545, 4565
Hypson
4514, 4569, 4571
Daewoo
4502, 4508, 4514, 4515,
Exquisit
4514
Gibralter
4506, 4508, 4512
ICE
4564, 4569, 4579
4530, 4542, 4580, 4583,
Fenner
4502, 4580
GoldStar
4508, 4512, 4514, 4515,
ICeS
4565
4599, 4600
Ferguson
4523, 4536, 4551, 4564
IR
Curtis Mathes
Cybertron
4514, 4527, 4536, 4557,
4558, 4575
Gooding
Fidelity
4558, 4563
Goodmans
Filsai
4564
4505, 4513, 4523, 4536,
4539, 4541, 4545, 4564,
4594
4503, 4504, 4513, 4514,
4588
4525, 4526, 4527, 4531,
Dainichi
4565
Dansai
4514
Dayton
4502
Daytron
4508
Finlandia
4562
De Graaf
4562
Finlux
4514, 4525, 4526, 4552
Decca
4514, 4526
Firstline
4502, 4563, 4564, 4572,
Graetz
4545
Denko
4569
4607
Granada
4514, 4526, 4562, 4564
ITS
4513, 4514, 4526, 4552,
4534, 4535, 4536, 4545,
4564, 4579, 4580, 4600
4557, 4558, 4559, 4560,
Gorenje
4578
4561, 4563, 4564, 4566,
Gradiente
4520, 4523, 4548
4572, 4573, 4578, 4580,
4579
4571, 4598
ITT
4545
4514, 4525, 4560, 4588,
ITV
4514, 4569
4593, 4595
Iberia
4514
Grunpy
4552, 4553
Imperial
4578, 4582
HCM
4502, 4571, 4581
Indiana
4514
Halifax
4564
Infinity
4521
Hallmark
4551
Ingelen
4545
4502, 4578
Hampton
4563, 4564
Ingersol
4502
4545, 4569
Hanimex
4572
Inno Hit
4526
4526, 4552, 4561, 4609
Hanseatic
4514, 4593
Innova
4514
4549, 4552, 4553, 4569,
Hantarex
4514
Inteq
4506
4572
Hantor
4514
Interbuy
4514, 4569
4553
Harley Davidson
4552
Interfunk
4514, 4545, 4592
4502, 4565, 4580
Harman/Kardon
4521
Internal
4514
4565
Harvard
4553
Intervision
4514, 4564, 4569
4502
Harwood
4502, 4514, 4581
Irradio
4565, 4579
Fisher
vrandin
4590, 4592, 4593
4542, 4544, 4562, 4564,
Denon
4539
Denver
4514
Desmet
4502, 4514
Flint
4584
Diamant
4514
Forgestone
4558
Dixi
4502, 4514
Formenti
4514
Dual
4514, 4564
Fortress
4531
Dual Tec
4564
Fraba
4514, 4578
Dumont
4506, 4508, 4525
Friac
Dwin
4617, 4620
Frontech
ECE
4514
Fujitsu
Elbe
4564
Funai
Electroband
4500, 4554
Electa
4569
Futuretech
Elin
4514
GBC
Elite
Elta
Grundig
4578
7
PRESET CODE
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
4565
Liesenkotter
JBL
4521
JCB
4500
Isukai
NEDERLANDS
SVENSKA
4581
Optimus
Minutz
4510
Optonica
4531, 4546
Mitsubishi
4508, 4513, 4531, 4535,
Orion
4514, 4550, 4552, 4567,
4514, 4573
Minoka
Lifetec
4514, 4565, 4580
Loewe
4592
4542, 4547, 4568, 4605
4572, 4576, 4585
4540, 4551, 4592
4513, 4520, 4532, 4557,
Logik
4505
4579, 4606
Luma
4561
Mivar
Janeil
4516
Lumatron
4564
KB Aristocrat
4545
Luxman
4523
KEC
4553
Luxor
4559
Multibroadcast
4558
Osio
4514
KTV
4512, 4515, 4553, 4554,
M Electronic
4502, 4514, 4536, 4545,
Multitech
4502, 4553, 4563, 4564
Oso
4565
JVC
Orline
Monaco
4502
Osaki
Motorola
4522, 4531
4514, 4565
4526, 4564, 4565, 4569,
4581
4564, 4580, 4587
Murphy
4515, 4526, 4545, 4563
Osume
4526
4502, 4563, 4564, 4565,
MEI
4554
Myryad
4593
Otto Versand
4513, 4514, 4564, 4590,
4571
MGA
4508, 4512, 4540, 4551
NAD
4543, 4547, 4551
4508, 4512, 4523, 4524,
NEC
4508, 4512, 4513, 4523,
Pael
4563
4548, 4584, 4589
Palladium
4578, 4582
4564, 4570
Kaisui
4563
MTC
4592, 4593
Kamp
4563
Kapsch
4545, 4561
Karcher
4598
Magnafon
4527, 4563
NEI
4514
Panama
4564, 4569
Kasui
4571
Magnavox
4509, 4512, 4513, 4521,
NTC
4530
Panasonic
4518, 4522, 4537, 4545,
4554, 4563, 4592
4566, 4568, 4577, 4605
Kathrein
4593
4533, 4552, 4555, 4556,
Nakimura
4514, 4580
Kawasho
4563
4624
Nakio
4587
Panavision
Kaypani
4519
Magnum
4514
National
4566
Pathe Cinema
4563
Kendo
4514
Majestic
4505
Neckermann
4514, 4590, 4593
Pausa
4502
Kennedy
4561
Manesth
4564, 4569
Nesco
4552
Penney
Kenwood
4508, 4512
Marantz
4512, 4514, 4521, 4593
Netsat
4514
4511, 4512, 4515, 4517,
Kingsley
4563
Mark
4514
Neufunk
4514, 4593
4518, 4523, 4524, 4538,
Kloss
4516
Matsui
4502, 4503, 4513, 4514,
New Tech
4564
4543, 4551, 4618, 4626
Kneissel
4514, 4580, 4598
4526, 4550, 4562, 4564,
Nicamagic
4563
Perdio
4572, 4576, 4579, 4588
Nikkai
4514, 4526, 4563, 4565,
Philco
4514
4501, 4507, 4508, 4510,
4514, 4545
4508, 4509, 4512, 4521,
Kolster
4514
Konka
4602, 4603, 4604, 4613,
Matsushita
4568, 4605
4614
Mediator
4504, 4514
Nikko
4512, 4530, 4551
4514
Medion
4607
Nobliko
4525, 4563
Kosmos
4514
Megas
4598
Nokia
4587
Phoenix
4563
Koyoda
4502
Megatron
4501, 4539, 4551
Nordmende
4536
Phonola
4504, 4514
Kyoshu
4581
Memorex
Kyoto
4545
Korpel
4533, 4539, 4585
4569
Philips
4504, 4514, 4521, 4558,
4580, 4593
4502, 4505, 4523, 4540,
Noshi
4507
Pilot
4508, 4512, 4515
4542, 4551, 4552, 4568,
Novak
4504
Pioneer
4536, 4545, 4547, 4608
LG
4523
4585
Novatronic
4514
Plantron
4502
LXI
4517, 4521, 4542, 4543,
Metz
4577
Oceanic
4545
Playsonic
4564
4551, 4618
Midland
4506, 4515, 4517, 4518,
Okano
4502, 4514, 4569, 4578
Portland
4508, 4515, 4530
4538, 4618
Omega
4569
Precision
4564
4525, 4588
Onwa
4553
Prima
4569
Leyco
4514, 4526, 4569, 4572
Liesenk & Tter
4514
Minerva
8
PRESET CODE
SVENSKA
Princeton
NEDERLANDS
ESPAÑOL
ITALIANO
FRANCAIS
DEUTSCH
4616
Reflex
4514
Semivox
4553
Sunwood
4514
Prinz
4559
Revox
4514
Semp
4543
SuperTech
4563
Prism
4518
Rex
4545, 4561, 4569
Sencora
4502
Supra
4523
Profex
4502
Rhapsody
4554, 4563
Sentra
4565
Supre-Macy
4516
Profi
4502
Roadstar
4502, 4565, 4569, 4582
Serino
4598, 4563, 4584
Supreme
4500
Profitronic
4514
Royal Lux
4581
Sharp
Proline
4526
Runco
4506, 4512, 4589, 4597
Proscan
4517, 4618
SBR
4504, 4514, 4558
Prosonic
4514
SEG
4513, 4564, 4569, 4607
Protech
4513, 4515, 4531, 4546,
Susumu
4565
4610, 4611
Sylvania
4509, 4512, 4521, 4533
Shintoshi
4514
Symphonic
4549, 4553
Shogun
4508
Sysline
4514
4502, 4514, 4564, 4569,
SEI
4550, 4572
Shorai
4572
Sytong
4563
4582, 4607
SEI-Sinudyne
4514
Siemens
4514, 4560, 4573, 4574
TMK
4523, 4550, 4551
Proton
4501, 4519, 4551, 4586
SKY
4514
Signature
4505
TNCi
4506
Pulsar
4506, 4508
SSS
4508, 4553
Silva
4563
TVTEXT 95
4593
Pye
4504
Saba
4536, 4545, 4575
Silver
4513
Tandberg
4577
Tandy
Quasar
Quelle
ENGLISH
4518, 4522, 4546, 4568,
Sagem
4598
Simpson
4555, 4556
4605
Saisho
4502, 4503, 4550, 4569
Sinudyne
4550, 4572
4515, 4526, 4531, 4545,
4564, 4565
4503, 4514, 4525, 4573,
Salora
4545, 4559
Sky-Worth
4514
Tashiko
4513, 4564
4574, 4590, 4592
Sampo
4512, 4515, 4519
Solavox
4545
Tatung
4501, 4514, 4522, 4526,
Questa
4513
Samsung
4502, 4508, 4512, 4514,
Sonitron
4562
R-Line
4514
4515, 4523, 4524, 4529,
Sonoko
4502, 4514
RBM
4525
4551, 4564, 4569, 4578,
Sonolor
4545, 4562
RCA
4507, 4508, 4517, 4518,
4593, 4595
Sontec
4514
Tec
4564
Sony
4529, 4531, 4538, 4608,
Samsux
4515
4618, 4621, 4622, 4623,
Sandra
4563
4626, 4627
Sansei
4583
RFT
4526
Sansui
Radialva
4514, 4565
Sanyo
Radio Shack
4508, 4512, 4515, 4517,
4564
Teac
4502, 4514, 4569, 4571,
4581, 4582, 4584, 4607
4500, 4503, 4513, 4528,
Technics
4518, 4568, 4605
4590, 4605
Technol Ace
4552
Sound & Vision
4580
Techwood
4501, 4518, 4523
4585
Soundesign
4551, 4552, 4553, 4555
Teknika
4503, 4513, 4526, 4542,
Soundwave
4514, 4582
4505, 4508, 4515, 4521,
4523, 4524, 4530, 4540,
4544, 4562
Spectricon
4501
4523, 4542, 4546, 4551,
Schneider
4514, 4565, 4579, 4607
Squareview
4549
4553, 4618
Scimitsu
4508
Ssangyong
4502
4504, 4514
Scotch
4551
Standard
4502, 4564, 4565
Telegazi
4514
Radiomarelli
4514
Scotland
4545
Starlite
4553
Telemeister
4514
Radiotone
4502, 4514, 4569
Scott
4508, 4551, 4552, 4553,
Stenway
4565, 4571
Telesonic
4514
4567
Stern
4545, 4561
Telestar
4514
4517, 4521, 4523, 4542,
Strato
4514, 4569
Teletech
4502
4543, 4544, 4549, 4551,
Stylandia
4564
Teleton
4513, 4555, 4561, 4564
4552, 4618
Sunkai
4572, 4576
Televideon
4563
4545, 4561
Sunstar
4502, 4514, 4579
Temco
4572
Radiola
Rank Arena
4513
Realistic
4508, 4512, 4515, 4523,
Sears
4542, 4546, 4551, 4553
Recor
4514
Redstar
4514
Seleco
9
PRESET CODE
4552, 4553, 4555
Telefunken
4523, 4534, 4536, 4575,
4601
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Tennessee
4514
Watson
4514
Radiola
2511
Onkyo
2001, 2016, 2018
Tensai
4565, 4572
Watt Radio
4563
Realistic
2507
Optimus
2011
Texet
4563, 4565
Wega
4513
Renaissance
2510
Oritron
2023
Thomson
4536, 4601, 4627
Wegavox
4502
Salora
2502
Panasonic
2000, 2020, 2031
Thorn
4514, 4526, 4557, 4558,
White Westinghouse
Samsung
2510
Philco
2035
Tokai
4590, 4592
4514, 4563, 4585, 4599,
Sega
2500
Philips
2001, 2007
4502, 4514, 4545
4600
Sony
2504, 2506
Pioneer
2004, 2011, 2020
Tomashi
4571
Windstar
4571
Technics
2508
Princeton
2029
Toshiba
4513, 4524, 4525, 4542,
Xrypton
4514
Telefunken
2501
Proline
2024
4543, 4591, 4625
Yamaha
4508, 4512
Theta Digital
2505
Proscan
2003
Tosonic
4554
Yamishi
4564, 4571, 4584
Yamaha
2509
RCA
2003, 2011, 2042
Totevision
4515
Yokan
4514
REC
2034
Realmagic
2029
2039
Roadstar
2034
Trans Continens
4564
Yoko
4514, 4564, 4569
DVD
Tristar
4558, 4565
Zanussi
4561
Afreey
Triumph
4550
Zenith
Tsoschi
4571
4505, 4506, 4530, 4585,
Aiwa
2022
SM Electronic
2035
4600
Akai
2015
Sampo
2039
4501
Apex
2028, 2049
Samsung
2012
Bush
2035
Sanyo
2027
Uher
4561
Ultravox
4514, 4563
Unic Line
4514
LD
Denon
0000, 0001
Sharp
2019
United
4514
Aiwa
2507
Emerson
2014
Sherwood
2021
Universal
4511
Carver
2502, 2505, 2510
Fisher
2027
Sony
2005
Universum
4514, 4569, 4578
Cyrus
2511
GE
2003
Teac
2011
Univox
4514, 4545
Denon
1111, 1112, 1113
Go Video
2044
Technics
2000
Vector Research
4512
Disco Vision
2500
Gradiente
2023
Techwood
2036
Vestel
4514
Funai
2507
Harman/Kardon
2013, 2041
Theta Digital
2011
Victor
4513, 4520, 4568, 4605
GoldStar
2503
Hitachi
2012, 2025
Thomson
2003, 2009
Videologic
4565, 4563
Harman/Kardon
2505
Hiteker
2028
Toshiba
2001
Videotechnic
4564
Hitachi
2500
JMB
2037
Universum
2014
Vidikron
4521
Magnavox
2505, 2509
JVC
2010, 2017
Wesder
2040
Vidtech
4508, 4513, 4551
Marantz
2502, 2505
Kenwood
2000, 2006, 2032, 2048
Wharfedale
2033, 2038
Viking
4516
Mitsubishi
2501
Konka
2043, 2045, 2046, 2047
Yamaha
2000, 2008
Vision
4564
NAD
2501
LG
2014
Yamakawa
2026
Vistar
4561
Optimus
2501
Lecson
2038
Zenith
2001, 2014
Voxson
4545
Panasonic
2508
Magnavox
2001, 2030
Waltham
4564
Philips
2502, 2505, 2511
Marantz
2007
TAPE
Wards
4505, 4508, 4509, 4510,
Pioneer
2500, 2501
Microsoft
2003
Aiwa
1502, 1516, 1517
4511, 4512, 4521, 4523,
Polk Audio
2505
Mitsubishi
2002
Akai
1525, 1529
4528, 4533, 4546, 4551,
Quasar
2508
NAD
2036
Arcam
1506
4552
Zonda
10
PRESET CODE
SVENSKA
Carver
1502
Denon
0000
Fisher
1505
Garrard
1527, 1529
Grundig
1502
Harman/Kardon
1502, 1514
Inkel
1503, 1504, 1528
JVC
1521, 1522, 1523
Kenwood
1503, 1504
Magnavox
1502
Marantz
1500, 1502
Memorex
1509, 1510
Mitsubishi
1525, 1529
Myryad
1502
Onkyo
1511, 1512, 1524
Optimus
1501, 1518, 1528, 1529
Panasonic
1519
Philips
1502
Phonotrend
1528
Pioneer
1501, 1509, 1510, 1518
Polk Audio
1502
RCA
1501, 1518
Revox
1502, 1515
Sansui
1500, 1502
Sanyo
1505
Sherwood
1528
Sony
1513, 1520, 1526
Tae Kwang
1529
Teac
1525, 1527
Technics
1519
Thorens
1502
Victor
1521, 1522, 1523
Wards
1501
Yamaha
1507, 1508
NEDERLANDS
DVD preset codes
DVD-Voreinstellungscodes
Codes préréglés DVD
Codici di preselezione DVD
Códigos de preajuste de DVD
DVD-voorkeuzecodes
Förinställda DVD-koder
B
Model No.
Modellnr
Modéle numéro
Modello No
Nº de modelo
Modelnr
Modellnr
ESPAÑOL
0000
DVD-550
DVD-700
DVD-900
DVD-1000
DVD-1400
DVD-1500
DVD-1710
DVD-1910
DVD-2200
DVD-2800
DVD-2800II
DVD-2900
DVD-2910
DVD-3800
DVD-3910
DVD-A11
DVD-A1
DVD-A1XV
11
PRESET CODE
0001
DVD-800
DVD-1600
DVD-2000
DVD-2500
DVD-3000
DVD-3300
ITALIANO
FRANCAIS
DEUTSCH
ENGLISH
TOKYO, JAPAN
www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in Japan 00D 511 4452 002
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement