BT5701SiA2 (Bluetooth UART PCB Module with Antenna, Class 2)

BT5701SiA2 (Bluetooth UART PCB Module with Antenna, Class 2)
Bluetooth UART PCB
Module w/Antenna
Class II
BT5701SiA2
ƒ Bluetooth UART PCB Module enables any UART Or RS232**
devices with Bluetooth capability and eliminates RS232 cable
connections.
ƒ This unit can be configured as a Bluetooth Piconet or as a point-topoint RS232 cable replacement set. It is an ideal wireless link solution
for industrial, medical and commercial applications which require
freedom from cable connections. It supports SPP as a Master or a
Slave.
** Need additional UART to RS232 conversion. UART to USB Virtual
COM port conversion also available.
Application Scenario
Example of RS232 Cable Replacement application
Hotspot wireless
router
Internet account
registration printer
Example of RS232 Piconet application
Bluetooth enabled PC or PDA with
RS232 application program
RS232 devices
Features and Benefits
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Provides optional USB Interface supported Evaluation Kit (ACT-BT5701SiA2-EK)
Configurable as an UART/RS232 Cable Replacement Set
Supports Class 2 Output Power Up to 10 m Operation Range
Bluetooth SIG 1.2 Compliant
Profile Supported: SPP as a Master or as a Slave
Baud Rate Supported: 1.2k bps ~ 1843.2k bps; default 115.2k bps
ƒ Configurable for Baud Rate, Data Bit, Parity Check, Stop Bit, RTS/CTS Flow
Control, BD Address, Device Name, Control Flag, PIN Code, Watchdog Timeout,
Supervision Timeout, and Peer BD Address (only used in Master)
Bluetooth UART PCB
BT5701SiA2
Class II
Module
w/Antenna
Bluetooth RS232 Wireless Cable Solution
BCR01
Specifications
Model No.
BT5701SiA2
Standard
Bluetooth SIG 1.2
Chip Set
RFMD
Bluetooth Profile
Serial Port Profile (SPP) only
Baud Rate
1.2k bps ~ 1843.2k bps; default 115.2k bps
Configurable Parameters
Baud Rate, Data Bit, Parity Check, Stop Bit, RTS/CTS Flow Control,
COM Port, Device Name, Control Flag, PIN Code,
Master or Slave,
Watchdog Timeout,
Supervision Timeout,
BD Address
Interface
UART interface
RF
Specifications
Frequency Band
2.400~2.4835 GHz unlicensed ISM band
Spectrum
FHSS (Frequency Hopping Spread Spectrum)
Modulation
GFSK
Output Power
4 dBm (internal embedded antenna)
Receiving Sensitivity
-82 dBm (typical)
Power Class
Class 2 (internal embedded antenna)
Range
Class 2 up to 10 m (open-air)
LED Indicators
Connection Activities LED
Power
External 2.3V~3.63V (Typical +3.0V)
Dimensions
PCB
Operating / Storage Temperature
41.2 x 20.4 x 3.2 mm (1.62x 0.80 x 0.13 in.) (L x W x H)
0o C ~ 55o C (32o F ~ 131 o F ) / -20o C ~ 80o C (-4o F ~ 176o F )
Specifications may be changed without prior notice.
All trademarks, logos, organization & company names, and product model names are the
properties of the respective organizations or companies.
921 Corporate Way, Fremont, CA 94539
Tel: +1-510-490-8024, Fax: +1-510-623-7268
E-mail: [email protected], http://www.actisys.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement