Installing Production Print

Installing Production Print
Adobe® Digital Enterprise Platform
Extension – Production Print
Version 10.0
Installation Guide
Rev A
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide
Rev A
© OPEN TEXT CORPORATION
ALL RIGHTS RESERVED
United States and other international patents pending
Portions copyright 2007 - 2011 Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo,
LiveCycle and PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and/or other countries. All other trademarks are the property of their respective owners.
Use of this software program is protected by copyright law, patent law, and international treaties. No part of
this software product, associated documentation (including online help tools) may be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express
written permission of Open Text Corporation. Information in this documentation is subject to change without
notice. Open Text Corporation assumes no responsibility or liability for any errors or inaccuracies that may
appear in this software program. All brands, product names and trademarks of other companies mentioned
in this software program are used for identification purposes only and are acknowledged as property of the
respective company. Companies, names and data used in examples in this software program are fictitious
unless otherwise noted.
Open Text Corporation offers no guarantees and assumes no responsibility or liability of any type with
respect to third party products and services, including any liability resulting from incompatibility between the
third party products and services and the products and services offered by Open Text Corporation and its
direct/indirect subsidiaries. By using Open Text Corporation software products and the third party products
or services mentioned in this software product, you agree that you will not hold Open Text Corporation and
its direct/indirect subsidiaries responsible or liable with respect to use of such third party products or services.
The trademarks, logos, brands, and service marks found in this software program are the property of Open
Text Corporation or other third parties. You are not permitted to use such marks without the prior written
consent of Open Text Corporation or the third party that owns the marks.
Use of any Open Text Corporation products or services with any third party products or services not
mentioned in this documentation is entirely at your own risk.
Adobe® Digital Enterprise Platform Extension - Production Print 10.0
The license to this product was purchased from Adobe Systems Incorporated or a third-party
authorized by Adobe.
It is a licensed product containing OpenText Inc. technology
Use of this Software is controlled by the Adobe Systems Incorporated End User License Agreement
(EULA).
All Maintenance and Support service is provided by Adobe Systems Incorporated.
The terms and conditions governing your use of the software are described in the EULA
accompanying the product provided by Adobe Systems Incorporated.
For licensing issues contact Adobe Systems Incorporated.
The installation media and documentation set contain and reference components that may not be
enabled for use by or with your ADEP Extension - Production Print License.
Contact information for Adobe Systems Incorporated
For patch updates, technical notes, and additional information about this product see
http://www.adobe.com/support/livecycle/
For other general questions see
www.adobe.com/aboutadobe/contact.html
Developer information
At the Adobe Developer Connection ADEP website,
http://www.adobe.com/devnet/enterprise-platform.html,
you can get the latest developer information and extend your knowledge with articles, tutorials, code
samples, downloads, and sample applications.
For information about developer resources that are available, see
www.adobe.com/enterprise/developer/
Adobe, the Adobe logo, and LiveCycle are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries. All other trademarks are the
property of their respective owners.
© 2007 - 2011 Adobe Systems Incorporated. All rights reserved.
5
Contents
About installing Production Print....................................................................7
Supported software ..........................................................................................9
Supported ADEP software .................................................................................. 9
Supported software, platforms, and databases .............................................. 10
StreamServer (including the XFA processor)............................................... 10
Design Center (including ADEP Designer integration)................................. 11
Databases .................................................................................................... 11
Application servers (StreamStudio).............................................................. 12
Directory servers .......................................................................................... 12
JVMs ............................................................................................................ 12
Virtual environments ......................................................................................... 13
Installing Production Print .............................................................................15
Installation media............................................................................................... 16
Installing on Windows ....................................................................................... 17
Master setup ................................................................................................ 17
Installing the design environment................................................................. 19
Installing the production environment .......................................................... 19
Installing the Document Service Component ............................................... 19
Installing the sample Projects ...................................................................... 20
Installing the StreamServe Persuasion SP5 Help........................................ 20
Installing on UNIX .............................................................................................. 21
Upgrading to Production Print ......................................................................23
Upgrading the Project to Production Print ...................................................... 24
Upgrading the DSC to Production Print........................................................... 25
Verifying the Production Print installation ...................................................27
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
6
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
7
About installing Production Print
This document informs how to install Adobe® Digital Enterprise Platform
(ADEP) Extension – Production Print. In this document, the ADEP Production
Print Extension is referred to as Production Print.
The document includes information about:
•
Supported software, platforms, and databases.
•
How to install Production Print.
•
How to upgrade previous LiveCycle Production Print versions to this
version of Production Print.
•
How to verify the Production Print installation.
Components
•
Production Print
The OpenText – Adobe integrated solution.
•
StreamServe Persuasion SP5, Enhancement Pack 1
The OpenText release that the integrated solution is based on. StreamServe
Persuasion includes the StreamServe Component Framework, Design
Center, and StreamServer.
•
ADEP Designer
The Adobe forms design product that is embedded in the integrated
solution’s design environment.
•
StreamServe Process tool for ADEP Designer
The application, developed by OpenText, that integrates ADEP Designer in
StreamServe Design Center.
•
XFA processor
The application, developed by OpenText, that enables the StreamServe
Persuasion runtime environment to generate output in various formats from
XML data files and ADEP Designer form templates.
User documentation
Standard StreamServe Persuasion documentation is used along with the
Production Print specific documentation.
If there any inconsistencies between the standard documentation and the
Production Print documentation, the Production Print documentation is the
correct documentation. For example, the information in this document overrides
any corresponding information in StreamServe Persuasion SP5 Installation
Guide or in the StreamServe Persuasion SP5 Supported platforms and software
Reference Guide.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
8
About installing Production Print
The following documents are specific to Production Print:
•
Adobe Digital Enterprise Platform, Extension – Production Print, Release
Notes – describes new and changed features.
•
Adobe Digital Enterprise Platform, Extension – Production Print,
User Guide – describes the Production Print functionality.
•
Adobe Digital Enterprise Platform, Extension – Production Print,
Installation Guide – (this document) describes how to install, upgrade, and
verify the Production Print software. It also lists supported software and
platforms.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
9
Supported software
In this chapter
•
Supported ADEP software on page 9.
•
Supported software, platforms, and databases on page 10.
•
Virtual environments on page 13.
Supported ADEP software
The following software and versions are supported:
•
ADEP Basic or Standard Edition, Version 10.0 or later
•
ADEP Designer, Version 10.0 or later
Service packs are available from Adobe Enterprise Support.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
10
Supported software, platforms, and databases
Supported software
Supported software, platforms, and
databases
Production Print supports a slightly different set of platforms compared to other
ADEP products. Any deviations from ADEP are stated in this chapter.
In this chapter
•
StreamServer (including the XFA processor) on page 10.
•
Design Center (including ADEP Designer integration) on page 11.
•
Databases on page 11.
•
Application servers (StreamStudio) on page 12.
•
Directory servers on page 12.
•
JVMs on page 12.
StreamServer (including the XFA processor)
The following platforms are supported:
•
Sun Solaris 10
•
IBM AIX 6.1.x
•
IBM AIX 7.1.x
•
HP-UX 11i V2
•
HP-UX 11i V3
•
SUSE Linux Enterprise Server 11 (on x86-64 bit hardware)
•
Red Hat Enterprise Linux ES/AS 5.5 and later (on x86-64 bit hardware)
•
Microsoft Windows 2003 Server – Service pack 2 and later (on x86-32/64
hardware)
•
Microsoft Windows 2008 Server R2 (on x86-64 bit hardware)
Windows 2008 support is for R2 only. Previous versions are not
supported. Windows 2008 R2 is 64-bit only.
Adobe recommends a minimum of 4 GB RAM for ADEP. The minimum
recommendation for Production Print is 2 GB RAM.
Deviations from ADEP 10.0.0
Supported by Production Print, but not ADEP:
•
IBM AIX 7.1
•
HP-UX 11i V2 & V3 on Itanium hardware is supported and is delivered on
the product media. Limitations: post-processing and SAP Delivery Manager
are not supported.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Supported software, platforms, and databases
Supported software
Design Center (including ADEP Designer integration)
The following platforms are supported:
•
Microsoft Windows XP Professional – Service pack 3
•
Microsoft Windows 2003 Standard Edition – Service pack 2 and later
•
Microsoft Windows 2003 Server Enterprise Edition – Service pack 2 and
later
•
Microsoft Windows 7 Professional Edition
•
Microsoft Windows 7 Ultimate Edition
•
Microsoft Windows 2008 Server R2 Standard Edition
•
Microsoft Windows 2008 Server R2 Enterprise Edition
•
Microsoft Windows 2008 Server R2 Data Center Edition
Windows 2008 support is for R2 only. Previous versions are not
supported. Windows 2008 R2 is 64-bit only.
Deviations from ADEP 10.0.0
Not supported:
•
Windows Vista
•
Microsoft Windows 7 Home
Databases
The following databases are supported:
•
Microsoft SQL Server 2008 – Service pack 1 or R2
•
Microsoft SQL Server 2005
•
Oracle Database 10.2
•
Oracle Database 11g R1 – Patch Set 11.1.0.7 and 11.1.0.7 Patch Set
update 3
•
Oracle Database 11g R2 – Base Release Patch Set Update 11.2.0.1.1 and
patch 9165206
•
IBM DB2 9.5.x with latest patch
Deviations from ADEP 10.0.0
Not supported:
•
IBM DB2 v9.1
•
MySQL
Note: IBM DB2 usage is limited to queue usage. You cannot use IBM DB2 with
StreamStudio applications.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
11
12
Supported software, platforms, and databases
Supported software
Application servers (StreamStudio)
The following application servers are supported:
•
WebSphere 6.1 /7.0
•
Apache Tomcat 5.5 and 6.0
Deviations from ADEP 10.0.0
Not supported:
•
JBoss
•
Web Logic
Supported by Production Print, but not ADEP:
•
Apache Tomcat
Directory servers
•
Microsoft Active Directory 2003, 2008
•
OpenDS
Deviations from ADEP 10.0.0
Not supported:
•
Sun One
•
IBM Tivoli Directory Server
•
Novell eDirectory
Supported by Production Print, but not ADEP:
•
OpenDS
JVMs
The following JVMs are supported:
•
Sun Java 6 update 12 or higher (32-bit only)
Deviations from ADEP 10.0.0
Not supported:
•
IBM Java 6
•
JRockit Java 6
•
64 bit JVM
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Virtual environments
Supported software
Virtual environments
OpenText supports all StreamServe Persuasion applications on the base operating
system, regardless of vendor or version of the virtual environment. See Supported
software, platforms, and databases on page 10.
If an issue is encountered relating to the normal operation of any StreamServe
Persuasion applications whilst running within a virtualized environment,
OpenText is only obligated to attempt to reproduce the issue on the same base
operating system. If the issue cannot be reproduced by OpenText on the same
base operating system, OpenText will request that the issue is referred to the
vendor of the virtualization software for further investigation.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
13
14
Virtual environments
Supported software
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
15
Installing Production Print
This chapter describes the installation media and how to install the Production
Print software.
You cannot install Production Print in parallel with LiveCycle
Production Print ES2 (Update 1) or any other previous version on the
same operating system.
For general information about installing, repairing, or uninstalling StreamServe
Persuasion, see the StreamServe Persuasion SP5, Installation Guide.
In this chapter
•
Installation media on page 16.
•
Installing on Windows on page 17.
•
Installing on UNIX on page 21.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
16
Installation media
Installing Production Print
Installation media
The Production Print software is available on DVD and as electronic
downloadable media.
The installation media contains:
•
Master setup.
•
Module setups for Windows installations.
•
Module setups for UNIX installations.
•
User documentation.
•
Document Service Component for ADEP Document Services Workbench.
•
Sample Projects.
Final packaging
The final packaging of the product constitutes a media set including two DVDs
or images:
•
ADEP Designer
•
Production Print
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Installing on Windows
Installing Production Print
Installing on Windows
You install the software for Windows from the installation media. Double-click
the mssetup.exe file to open the master setup.
If you download the electronic installation media, it is recommended
to unpack the ZIP file to a shallow directory. For example, C:\pp\
Using a deep directory structure with a long path name may cause file
losses when unpacking the ZIP file.
In this chapter
•
Master setup on page 17.
•
Installing the design environment on page 19.
•
Installing the production environment on page 19.
•
Installing the Document Service Component on page 19.
•
Installing the sample Projects on page 20.
•
Installing the StreamServe Persuasion SP5 Help on page 20.
Master setup
Figure 1
Master setup, with links to module setups
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
17
18
Installing on Windows
Installing Production Print
The installation consists of a master setup and a number of module setups.
Clicking a link in the master setup launches the setup wizard for the selected
module.
Link
Description
Before You Install
Displays information that is important to know before
you start the installation.
Installation Guide
Opens the Adobe Digital Enterprise Platform, Extension
– Production Print, Installation Guide (PDF, this
document).
Read License
Agreement
Opens the End User License Agreement (EULA)
document.
Framework and
Control Center
Installs the underlying software required to run
StreamServe applications.
StreamServer
Installs software needed to run StreamServer
applications. You must install the Framework and
Control Center before you install StreamServer.
Design Center
Installs Design Center.
StreamStudio
Installs the StreamStudio web applications including
Composition Center, Collector, Dispatcher, and
Reporter.
SAP Integration
Module setup for the components used for StreamServe
– SAP integration.
Register in SAP
Registers the StreamServe product in the System
System Landscape Landscape Directory at the customer site. This is
Directory
required if you want to use the SAP Solution Manager.
Browse
Opens a file browser to view the files on the media.
Exit
Exits the setup.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Installing on Windows
Installing Production Print
Installing the design environment
1
Install ADEP Designer.
Note: This is optional. You can run the StreamServe Process tool for ADEP
Designer without having ADEP Designer installed (if you use
existing form templates).
2
Install Design Center.
Installing the production environment
1
Install FrameWork and Control Center.
2
Install StreamServer.
Installing the Document Service Component
Production Print includes a Document Service Component (DSC). The DSC
allows you to create a process in Document Services Workbench that can
communicate with Production Print.
The DSC is provided on the installation media in the following JAR file:
Extras/DSC/lcppdsc
To install the DSC
1
Open Document Services Workbench.
2
Locate the Components view.
3
Right-click the Components folder and select Install component.
4
Navigate to the lcppdsc file, select the file, and click OK.
Alternative procedure
If you are upgrading from a previous LiveCycle Production Print release, you can
upgrade the existing DSC instead of installing the new version. See Upgrading
the DSC to Production Print on page 25.
At upgrading, you patch the previous DSC service and all service level
configurations are retained. If you uninstall the previous version and then install
the new version, all service level configurations are reset to the default values of
the new version.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
19
20
Installing on Windows
Installing Production Print
Installing the sample Projects
The sample Projects rely on a number of sample processes and resources that you
can install in ADEP using Document Services Workbench.
The processes and resources are provided on the installation media in the
LiveCycle Archive (LCA) file Extras\DSC\lcpp.lca.
To install the LCA file, please refer to the ADEP documentation.
Installing the StreamServe Persuasion SP5 Help
The standard StreamServe Persuasion SP5 Help is available as web help,
accessible over the Internet. When you select Help from a menu or press F1, the
web help opens in a separate browser.
If you wish to run the help locally on your computer, you must first install the help
files manually. Then enable local help in Design Center, and finally select Help
or F1 and follow the instructions to install the local help.
Note: The Production Print documentation is delivered as PDF files on the
installation media.
To install the StreamServe Persuasion SP5 Help manually
1
Go to the installation media directory:
...\<Language>\online help
Where <Language> is either English, German, or French.
2
Copy all files to the directory
<StreamServe_installation>\Applications\StreamSever\<Version>
\Common\OnlineHelp
To enable local help in Design Center
1
In StreamServe Design Center, select Tools > Design Center Settings.
The Design Center Settings dialog box opens.
2
In the Choose help type area, select Use local help.
When you select Help from a menu or press F1, an instruction is displayed
on how to install local help.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Installing on UNIX
Installing Production Print
Installing on UNIX
To install on UNIX, run the setup script using the following command:
./<StreamServe_installation>/setup_adobe
For more information, see the StreamServe Persuasion SP5 Installation Guide.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
21
22
Installing on UNIX
Installing Production Print
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
23
Upgrading to Production Print
This chapter describes how to upgrade the Design Center Project and the DSC
from any previous LiveCycle Production Print release to the Production Print
release.
For general information on how to upgrade earlier StreamServe releases to
Persuasion SP5, see the StreamServe Persuasion SP5 Upgrading Instructions.
Prerequisites
Production Print must be installed. See Installing Production Print on page 15.
You can upgrade to Production Print directly from any previous
LiveCycle Production Print release without any intermediate
installations.
In this chapter
•
Upgrading the Project to Production Print on page 24.
•
Upgrading the DSC to Production Print on page 25.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
24
Upgrading the Project to Production Print
Upgrading to Production Print
Upgrading the Project to Production Print
To upgrade an existing Design Center Project to Production Print, you must first
install Production Print and then open the Project in StreamServe Design Center.
After your confirmation, Design Center automatically upgrades the Project.
Note: You cannot open an upgraded Project in previous versions of the product.
If you are upgrading directly from LiveCycle Production Print ES Update 1 or
earlier, you must manually convert any previously imported XDP resources to the
XDP Template resource type.
To upgrade the Project
1
In Design Center, open the Project.
2
If your XDP resources are not already of resource type XDP Template, you
must manually convert them to XDP Template.
See the StreamServe Persuasion SP5 Design Center documentation.
Note: This step applies if you are upgrading directly from LiveCycle
Production Print ES Update 1 or earlier.
3
Open the Process and select the Open/Select Template command. Verify
that the correct resource is assigned.
4
Save and re-export the Project.
You must now upgrade the DSC to Production Print. See Upgrading the
DSC to Production Print on page 25.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Upgrading the DSC to Production Print
Upgrading to Production Print
Upgrading the DSC to Production Print
If you are upgrading from any previous LiveCycle Production Print release to this
Production Print release, you must upgrade the DSC. When upgrading, you patch
the previous DSC service and all service level configurations are retained.
To upgrade the DSC
1
Get new version of the Production Print DSC file, lcppdsc.jar, from the
installation media directory /Extras/DSC.
2
Open Document Services Workbench.
3
Connect to the upgraded ADEP server or ADEP instance.
4
Navigate to the Components view and locate the ProductionPrint
service.
5
If the service is running, right-click and select Stop.
6
Right-click the service and select Patch. Patching retains all service level
configurations from the previous version.
7
Browse to, and select, the new version of the Production Print DSC.
8
Right click the service and select Start.
Alternative procedure
An alternative to the procedure below is to uninstall the previous version and then
install the new version. See Installing the Document Service Component on page
19. Uninstalling resets all service level configurations to the default values of the
new version.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
25
26
Upgrading the DSC to Production Print
Upgrading to Production Print
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
27
Verifying the Production Print
installation
You can use a Sample Project, provided on the installation media, to verify that
the installation and the Project upgrade were successful.
See the Adobe Digital Enterprise Platform, Extension – Production Print,
User Guide > Sample Projects.
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
28
Verifying the Production Print installation
Adobe® Digital Enterprise Platform Extension – Production Print Installation Guide Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement