BH 1.200.04

BH 1.200.04
Data sheet
BHHx / BL Actuators
Sheet No.: BH 1.200.04 RevA
Date: October 2010
Standard paint specification
Hempel Paint – Bettis BHH Products
Surface preparation: :
Oil and grease etc. to be removed by emulsion cleaning. Entire area to be (high
pressure) fresh water cleaned in order to remove salts and other contaminants. When
the surface is dry: Abrasive blasting to minimum Sa 2½ according to ISO 8501-1:1988.
The specified high film thickness can best be obtained by airless spray application. If
another application method is used more applications are necessary to achieve the
specified dry film thickness (200 micron wet / 125 micron dry.) Stripe coating with brush
before or after spray application of each coat is to be carried out on areas difficult to
cover properly by spray as eg edges, corners, flanges, cutouts, handwelds and other
rough surfaces. The paint film dries to touch in four hours but must be fully cured (7
days/20°C) before the actuators can be taken into use.
Consult the separate APPLICATION INSTRUCTIONS for HEMPADUR 45141/45143.
Environment: Immersion.
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement