Bakers Pride Y-802-DSP General Manual

Bakers Pride Y-802-DSP General Manual
BAKERS
PRIDE
Job ____________
SUPER DECK
Y-DSP SERIES
GAS DISPLAY OVENS
Item # ___________
GAS DECK OVENS
G
q
Model Y-600-DSP Single
q Model Y-602-DSP Double
q
Model Y-800-DSP Single
q Model Y-802-DSP Double
STANDARD FEATURES
q
q
q
Model Y-602-DSP
q
with optional stone finish
q
q
SPECIFICATIONS
BAKERS PRIDE Y-DSP Display Ovens are ideal for display cooking
and exhibition kitchens. These ovens are designed and engineered
to be "built-in" behind brick, stone or tile applied directly to ovens
exterior or finished and trimmed in brass, copper, stainless or
powder-coated trim.
Ovens may be stacked two high. Oven exteriors are all heavygauge steel and are fully insulated up to 5" (127mm) thick for
cooler outer temperatures and consistent interior temperatures.
Interior oven frame is constructed of 1/4" (6mm) heavy-duty angle
iron frame, completely welded to form a single, unitized section.
The oven body and lining are then welded to the framework.
q
q
q
q
q
q
q
q
q
q
Y Series @ 120,000 BTUH per deck, natural or LP gas
300°-650° F (149°-343°C) throttling thermostat
Top & bottom heat control dampers & micro-slides
Combination gas controls with valve, regulator & pilot safety
Heavy-duty, slide-out flame diverters
8" (203mm) interior deck heights with 1 1/2" (38mm) thick
hearth stone decks
Black powder coated doors with custom hardwood handles or
stainless doors with tubular steel handles
Front or side mounted controls with large, hinged access
cover door in black powder coat or stainless steel
Dome top - removable for field installations
Front & side skirts
Aluminized steel interiors
Spring balanced, fully insulated doors
Rear gas connections
7-Gauge legs
Fully insulated throughout
2 Year limited part and labor warranty
Oven interiors are manufactured of high-heat resistant 16-gauge
aluminized steel. Doors are fully insulated, spring balanced with
natural black finish and custom wood handles.
OPTIONS & ACCESSORIES
Lintel plates support the masonry or tile for ease of installation.
Standard features include dome top plus front and side skirts.
All models feature independent, operator-controlled top & bottom
heat control dampers and micro slides for perfectly balanced
results.
Y Series features a 300°-650° F (149°-343°C) throttling thermostat,
8" (203mm) interior deck height with 1 1/2" (38mm) thick hearth
stone decks (steel decks optional) and are supported by a 1/4"
(6mm) angle iron frame.
Combination gas control incorporates a manual gas valve, pilot
safety and pressure regulator. Easily removable, slide-out, heavyduty flame diverters distribute the burner flame uniformly in the
burner chamber. A 3/4" (19mm) NPT gas connection is located on
the left side and left rear of oven - operator/installer may choose.
Heavy-duty, 7-gauge hot rolled steel legs are standard and finished
with durable Bakertone.
q
q
q
q
q
q
q
q
Side-mounted controls
Steel decks in lieu of hearth stone decks
150°-550° F (65°-288°C) thermostat
Automatic oven starter
Draft flue for direct vent (not available on CE units)
Fire brick hearth decks (Y-600/602 only)
Without dome and/or without skirts
Set of 4 casters - two with locks - not for use with skirts
CERTIFICATIONS
DESIGN
CANADIAN GAS ASSOCIATION
2 Year limited part and labor warranty standard.
BAKERS
PRIDE
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 • 1-800-431-2745 • fax 914/576-0605
www.bakerspride.com
®
CERTIFIED
C ER
TI FI E D
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
3/4" NPT GAS INLET
DEPTH
WIDTH
8 5/8"
(218mm)
D
1 5/8"
(41mm)
DECK
B
6 1/2"
(166mm)
8"(203mm)
55 1/8"
(1400mm)
C
6 1/2"
(165mm)
25 1/8"
(638mm)
DECK
A
FLUE VENT 6"
(152mm)
53 1/4"
(1353mm)
D
44 3/4" (1137mm)
PUSH-PULL ROD
DEPTH
43 1/4"
(1099mm)
30"
(762mm)
5 1/4" (134mm)
65 1/4"
(1658mm)
10 1/8"
(258mm)
LEFT SIDE VIEW
Single Unit With Side Controls
TOP VIEW
R
7 7/8"
(201mm)
DOME
8" (203mm)
64 1/4"
(1632mm)
DOME
71 1/8"
(1807mm)
69 1/2"
(1765mm)
9 7/8"
(249mm)
25 1/8"
(638mm)
21 1/2"
(546mm)
.
25 1/8"
(638mm)
PUSH-PULL ROD
3/4" NPT GAS INLET
55 7/8"
(1419mm)
54 3/8"
(1382mm)
8" (203mm)
39 1/8"
(994mm)
3 5/8" (92mm)
25 1/8"
(638mm)
30 3/4"
(781mm)
PUSH-PULL ROD
21 1/2"
(546mm)
30 3/4"
(781mm)
18 1/8"
(459mm)
29 1/4"
(744mm)
16"
(406mm)
LEFT SIDE VIEW
Stacked Unit With Side Controls
FRONT VIEW
Stacked Unit With Front Controls
6"
(152mm)
6"
(152mm)
12"
(305mm)
ALL DIMENSIONS NOMINAL
12"
(305mm)
For Direct Venting
For Installation Under
Ventilation Hood
MUST BE SPECIFIED AT TIME OF ORDER
STANDARD
SHIPPING INFORMATION
GAS SUPPLY
Shipping Weight
Carton Dimensions
Width
Lbs.
Kilos
Inches
Y-600-DSP 1385
Y-800-DSP 1600
626
31
Model
16"
(406mm)
56 3/4"
(1441mm)
Door Opening
Depth
mm
Inches
Crate Size
Height
Inches
mm
mm
Cubic
Feet
Model
Cubic
Meter
787
53 1364
82
2083
76
2.4
726
31 787
Each oven ships separately
Hearth Decks and Legs ship in separate cartons
60 1365
86
2184
78
2.8
Y-600-DSP
Y-602-DSP
Y-800-DSP
Y-802-DSP
BTUH
KW
CONNECTION
120,000
35.15
3/4”
240,000
70.30
3/4”
120,000
35.15
3/4”
240,000
70.30
3/4”
CE certification not available in LP gas
Each deck requires a separate gas connection
SPECIFICATIONS
Deck Sizes
AxB
Model
Y-600-DSP
Y-602-DSP
Y-800-DSP
Y-802-DSP
Overall Dimensions
mm
# Decks
C
D
Inches
mm
Inches
Height*
Inches
mm
914 x 1524
1
78
1981
43
1092 55 1/8
1400
36 x 60
914 x 1524
2
78
1981
43
1092 66 1/4
1683
44 x 66
1118 x 1676
1
84
2134
51
1295 55 1/8
1400
44 x 66
1118 x 1676
2
84
2134
51
1295 66 1/4
1683
36 x 60
* Overall height excludes dome top
BAKERS
PRIDE
mm
BAKERS PRIDE OVEN COMPANY, INC.
30 Pine Street, New Rochelle, NY 10801
914/576-0200 • 1-800-431-2745 • fax 914/576-0605
www.bakerspride.com
MINIMUM CLEARANCES
Noncombustible Construction
Inches
mm
Right
Left
Rear
Combustible Construction
Inches
mm
0
0
1
25
0
0
3
76
2
51
3
76
Continuous product improvement is a policy of Bakers Pride Oven Company.
Therefore, specifications and design are subject to change without notification
SDECK-Y-600-800-DSP — TSW:05/08
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement