GeFei Catalogue
MRS-MV
Module Multi-viewer& Router Large display ystem
Key Features
··Multi-format input combination selectable freely
··Up to 128 inputs ,and three kinds of input cards: CVBS/SDI , 3G/HD/SD /CVBS , and HDMI input card
··Any source displaied on any screen in any size.position and any aspect ratio
··Every output resolutions is up to [email protected]
··Dynamic UMDs &Tally from routers or Switchers
··Signal source format , AFD information and video&audio waveform overlay display
··Voice alarming of frozen or black video, video losing, audio silence and audio losing
··Built-in WebServer
··Support SNMP ,TSL protical
··Support local timeing,NTP,GPS serial timing
··Standard 9U frame with redundantedu hot plug power supply
MVS-X
1U Compact Module Multi-viewer system
The MVS Series is a high-quality, multi-view display system with features such as multi-format input, audio monitoring, waveform
display, real-time monitoring with voice alarm warnings, and dynamic UMD & tally from routers. Its module-based architecture provides
4 input format selections (CVBS/SDSDI/HDSDI/HDMI) with a 4xSD input card (auto-sensing CVBS/SDI/ASI), a 4xHD input card (autosensing HD/SD), and a 4xHDMI input card. Users can select different input formats and create up to a 21-image display system. The
MVS Series supports HDMI/VGA or HDMI/HDSDI output with a max output resolution of [email protected] It also can accept LTC/
EBU, TSL and tally control information. SNMP and RS-232 control protocol are also built into the machine, allowing all configuration and
operations to be done in 4 ways: web browser, SNMP, RS-232 or remote control panel. With its flexible, feature-rich platform, the MVS
Series is widely-used in broadcasting and production editing studios and is ideal for many applications where video/audio monitoring
and display are required!
Key Features
MVS
··Multi-format input combination selectable freely
··Three kinds of input cards: CVBS/SDI auto-sensing input card, HD/SD /CVBS auto-sensing input card, and HDMI input card
··Flexible output options 4:3, 16:9, customized aspect ratio
··Output resolutions, up to [email protected]
··Selectable air timer and countdown timers, analog and digital clocks types
··Dynamic UMDs &Tally from routers or Switchers
··Input signal format and AFD information overlay display
··Support video/audio monitoring and custom throu
··Voice alarming of frozen or black video, video losing, audio silence and audio losing
··Audio VU meter and video full-screen output
··Built-in WebServer
··Support SNMP ,TSL protical
··Support local timeing,NTP,GPS serial timing
··Standard 1U frame with dural power supply
1U Compact Module Multi-viewer system
2
MVS-X
Any Source Input CVBS SD/HD/3G-SDI HDMI
MVS
Up to 3 *4ch output CVBS/SDSDI/HDSDI/HDMI
Output resolution up to 1920*1200P
1U Compact Module Multi-viewer system
MVS-X
3
Support TSL protocol Dynamitic UMD & Tally
MVS
Display Waveform
Show Y waveform, PbPr waveform, vector, audio phase and audio
waveform
1U Compact Module Multi-viewer system
4
MVS-X
Display AFD information & video format of input source
MVS
Support voice alarm by SNMP protocol
1U Compact Module Multi-viewer system
MVS-X
5
Two kinds of alarm message: Alarm text and icon Alarm threshold, set
by web
MVS
Customize Layout
1U Compact Module Multi-viewer system
6
MVS-X
Two Kinds of Remote panel of MVS-X: MVS-X-SRCP and MVS-X-RCP
MVS
Serial Kinds of Timing: LTC, GPS and NTP timing
Serial Kinds of Clock and Timer: Digital Timer, and analog clock,
countdown timer and air timer
1U Compact Module Multi-viewer system
HDMI Input Module
ISignal Input:
Interface: 4*HDMI inputs, Type A
Format:
576i 50, 480i 59.94
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Support HDMI signal with embedded audio and indicate 4
audio channels of Group1.
Support HDCP protocol.
MVS-X
7
SD Input Module
ISignal Video Input:
Interface: 4*CVBS/SD-SDI, BNC
The rear of input module
The mini audio and tally input modul
CVBS input:
Impedance: 75 ohms
Return Loss:>40 dB to 5.8 MHz
Standard: NTSC/Pal
SDI Input
Impedance: 75 ohms
Signal type:SMPTE295M (525/625 lines)
Return Loss:>15 dB to 270 MHz
Signal Level: 800mV ±10%
Overshoot: ﹤80mV
Jitter: ﹤740ps
Rising and Falling Time: ﹤1500ps
Rising and Falling Time Different: ﹤500ps
DC Level: 0V±500mV
MVS
Audio Input
Input interface: 3-pin connector balanced
Input impedance: 600Ω
Maximum input level:+24dBu (0dbFS)
Sampling: 48 KHz
Frequency response:<±0.04dB @ 20Hz to 20 KHz
SNR: >80dB
Tally input:
Input interface: 3-pin
HD Input Module
Signal Video Input:
Interface: 4*HD/SD-SDI, BNC
1U Compact Module Multi-viewer system
The rear of input module
The mini audio and tally input module
8
MVS-X
HD-SDI input:
Impedance: 75 ohms
HD:SMPTE 292M;1.485,1.485/1.001Gb/s
SMPTE-425;2.970Gps
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Return Loss: ﹥15dB,5MHz to 1.5GHz
SD-SDI Input
Impedance:75 ohms
Signal type:SMPTE295M (525/625 lines)
Return Loss:>15 dB to 270 MHz
Signal Level: 800mV ±10%
Overshoot: ﹤80mV
Jitter: ﹤740ps
Rising and Falling Time: ﹤1500ps
Rising and Falling Time Different: ﹤500ps
DC Level: 0V±500mV
Audio Input
Input interface: 3-pin connector balanced
Input impedance: 600Ω
Maximum input level:+24dBu (0dbFS)
Sampling: 48 KHz
Frequency response:<±0.04dB @ 20Hz to 20 KHz
SNR: >80dB
Tally input:
Input interface: 3-pin
VGA+HDMI Output Module
The rear of 0utput module
Signal Video Input:
Interface: 1*HDMI, type A
Format:
576i 50, 480i 59.94
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Support HDMI signal with embedded audio and indicate 4 audio channels of Group1.
Support HDCP protocol.
VGA Output
Interface: 1*VGA, DB15
Type: RGB
Output resolutions:
1024x768x60p, 1280x720x60p, 1280x768x50p
1280x768x60p, 1280x1024x60p, 1360x768x60p
1366x768x60p, 1400x1050x60p, 1680x1050x60p
1600x1200x60p, 1920x1080x50p, 1920x1080x60p,
1920x1200x60p
1U Compact Module Multi-viewer system
The mini VGA and audio output module
MVS
HDMI Output:
Interface: 1*HDMI, type A
Output resolutions:
1024x768x60p, 1280x720x60p, 1280x768x50p
1280x768x60p, 1280x1024x60p, 1360x768x60p
1366x768x60p, 1400x1050x60p, 1680x1050x60p
1600x1200x60p, 1920x1080x50p, 1920x1080x60p,
1920x1200x60p
The HDMI output signal doesn’t contain embedded audio, just video signal.
Audio Output
Audio signal: 1*analog audio stereo
Input interface: 1x3-pin connector, unbalanced
Input impedance: 600Ω
Maximum input level: +24dBu (0dbFS)
Sampling: 48 KHz
For embedded SDI signal input, it monitors 2 channels. For analog audio input, it
monitors 1 channel. The audio channels can be selected on the Web server to monitor.
Control
Interface: 1*RJ45
Type: 10/100/1000M auto-adapting
MVS-X
9
HDSDI+HDMI Output Module
Signal Video Input:
Interface: 1*HDMI, type A
Format:
576i 50, 480i 59.94
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Support HDMI signal with embedded audio and indicate 4 audio channels of Group1.
Support HDCP protocol.
HDMI Output:
Interface: 1*HDMI, type A
Output resolutions:
1024x768, 1280x720, 1280x768
1280x1024, 1360x768, 1400x1050
1600x1200, 1680x1050, 1920x1080, 1920x1200
Frequency: 50/60Hz
Two channel HD/SD-SDI audio signals, eight channel HDMI audio signals, or one
channel analog audio can be embedded into the HDMI output signal. The audio channels
can be selected on the Web server to monitor.
HDSDI Output
Interface: 1*HD/SD-SDI, BNC
Impedance: 75 ohms
Format:SMPTE295M (525/625 lines)
SMPTE 292M;1.485,1.485/1.001Gb/s
SMPTE-425;2.970Gps
625i, 525i
720p 50/60;
1080i 50/60;
1080p 50/60;
Return Loss:﹥15dB,5MHz to 1.5GHz
The video and embedded audio signals are the same as HDMI output.
Control
Interface: 1*RJ45
Type: 10/100/1000M auto-adapting
MVS
The rear of 0utput module
Ordering Information
1U Compact Module Multi-viewer system
10
Model
MVS-1U-CASE
1U chassis
MVS-WUXGA
MVS output module
Description
1RU/ smart network ready, dual power supplies (120W), 6 slots
MVS-DWUXGA
MVS output module
1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + HD/SD-SDI outputs (up to
1080P), 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol support.
MVS-SD
MVS SD input module
4SDI/Composite (auto switching) video and 4 ch. Analog audio inputs, Tally interface, audio
absence/silence/out-of-range detection, video freezing detection, EDH detection
MVS-HD
MVS HD input module
4 HD-SDI/SDI (auto switching) video and 4 ch. Analog audio inputs,
Tally interface, audio absence/silence/out-of-range detection, video freezing detection
MVS-HDMI
MVS HDMI input module
4 HDMI video w/ embedded audio inputs, de-embedded audio, Tally interface, audio
absence/silence/out-of-range detection, video freezing detection
MVS-X
1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + VGA/DVI outputs +audio
monitoring, 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol support.
MVS-X-D
1U Compact Multi-viewer system with dual different outputs
MVS
MVS-X-D is based on modular structure of MVS-X, which provides two high-quality individual outputs. This system is equipped with two
output cards, and up to four input cards with which we can feed in 16 signals. Two outputs share all the signal sources with each other.
Signal can be appointed to any output for display freely.
There are HDMI and HDSDI dual output interfaces on each output card. The resolution of HDMI is up to 1920x1200, and the format
of HDSDI is up to 1080p 60. MVS-X-D provides three kinds of input card: 4xSD input card (auto-sensing CVBS/SDI), 4xHD input card
(auto-sensing HD/SD) and 4xHDMI input card. According to different application, it can build different display system in 1U frame, for
example, 4 images, 8 images, 12 images or 16 images display system.
MVS Series is a multi-view display system with rich features of high-quality, multi-format input, flexible and customizable functions,
remote panel, audio monitoring, waveform display, real time monitoring and voice alarm warning, and dynamic UMD &tally from routers.
It can be widely used in studio, broadcasting room, general control centre, production editing studio.
The most flexible combination and feature-rich platform make it ideal for many applications where video/audio monitoring and display
are required!
1U Compact Multi-viewer system with dual outputs
Key Features
··Provide high-quality dual outputs with flexible and individual configuration on each output
··Provide three kinds of input cards: CVBS/SDI auto-sensing input card, HD/SD auto-sensing input card, and HDMI input card
··According to the number and type of input card inserted 1U frame, build different Multi-viewer display system
··Signal can be displayed on any output flexibly and conveniently by configuration on the web server
··Multi-format input combination selectable freely
··Flexible output options;4:3, 16:9, customized aspect ratio;
··Editable dual program UMD and 4 channel audio meters display
··Provides several kinds of timer: air timer and countdown timers, analog and digital clocks types;
··Mark key signal/signals to find it/them rapidly in one complicated layout
··Support user-define the border color of each channel separately or cancel border display
··Dynamic UMDs &Tally from routers and Switchers via RS232 interface;
··Support format display of input signal and AFD information display;
··Video/audio auto detection and alarming, such as video loss, video frozen, video black, audio silence, audio overload with high rate of
accuracy
··Two forms of alarm: text alarm and icon alarm
··Support SNMP
··Support customized layout to preset various layouts for different application, such as studio, OB van, production room and so on
··Standard 1U frame with Dural power supply
MVS-X-D
11
Support TSL protocol Dynamitic UMD & Tally
MVS
Display AFD information & video format of input signal
1U Compact Multi-viewer system with dual outputs
Support SNMP Protocol Voice Alarm
12
MVS-X-D
Customize Layout
MVS
Serial Kinds of Timing: LTC, GPS and NTP timing
Provide digital Timer, analog clock, countdown timer and air timer
Applications
MVS-X-D
1U Compact Multi-viewer system with dual outputs
Studio—MVS-X-D can be applied in Studio system with two individual outputs from single device.
Meanwhile, signal source can be appointed to any output.
13
Production Station—MVS-X-D can be applied in Production station. Single device can be used in two
different rooms for monitoring at same time. Meanwhile, signal source can be appointed to any output.
MVS
Multi-media center—MVS-X-D can be applied in multi-media control center. HDMI/DVI signal is
supported by device. Two outputs can be spliced together for larger display. Any signal can be display across
the screens. (Coming soon)
1U Compact Multi-viewer system with dual outputs
14
MVS-X-D
Specification
HDMI Input Module
SD Input Module
Signal Input:
Interface: 4*HDMI inputs, Type A
Format:
625i 50, 525i 59.94
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Support HDMI signal with embedded audio and indicate 4 audio channels of Group1.
Support HDCP protocol.
Signal Video Input:
Interface: 4*CVBS/SD-SDI, BNC
The mini audio and tally input module
SDI Input
Impedance: 75 ohms
Signal type:SMPTE295M (525/625 lines)
Return Loss:>15 dB to 270 MHz
Signal Level: 800mV ±10%
Overshoot: ﹤80mV
Jitter: ﹤740ps
Rising and Falling Time: ﹤1500ps
Rising and Falling Time Different: ﹤500ps
DC Level: 0V±500mV
MVS
The rear of input module
CVBS input:
Impedance: 75 ohms
Return Loss:>40 dB to 5.8 MHz
Standard: NTSC/Pal
1U Compact Multi-viewer system with dual outputs
Audio Input
Input interface: 3-pin connector balanced
Input impedance: 600Ω
Maximum input level:+24dBu (0dbFS)
Sampling: 48 KHz
Frequency response:<±0.04dB @ 20Hz to 20 KHz
SNR: >80dB
Tally input:
Input interface: 3-pin
Signal type:3.3V~7V, high level
HD Input Module
Signal Video Input:
Interface: 4*HD/SD-SDI, BNC
The rear of input module
HD-SDI input:
Impedance: 75 ohms
HD:SMPTE 292M;1.485,1.485/1.001Gb/s
SMPTE-425;2.970Gps
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
MVS-X-D
15
1080p 50/59.94/60;
Return Loss: ﹥15dB,5MHz to 1.5GHz
The mini audio and tally input module
SD-SDI Input
Impedance: 75 ohms
Signal type:SMPTE295M (525/625 lines)
Return Loss:>15 dB to 270 MHz
Signal Level: 800mV ±10%
Overshoot: ﹤80mV
Jitter: ﹤740ps
Rising and Falling Time: ﹤1500ps
Rising and Falling Time Different: ﹤500ps
DC Level:0V±500mV
Audio Input
Input interface: 3-pin connector balanced
Input impedance: 600Ω
Maximum input level:+24dBu (0dbFS)
Sampling: 48 KHz
Frequency response:<±0.04dB @ 20Hz to 20 KHz
SNR: >80dB
Tally input:
Input interface: 3-pin
Signal type:3.3V~7V, high level
MVS
HDSDI+HDMI Output Module
The rear of 0utput module
Signal Video Input:
Interface: 1*HDMI, type A
Format:
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Support HDMI signal with embedded audio and indicate 4 audio channels of Group1.
Support HDCP protocol.
1U Compact Multi-viewer system with dual outputs
HDMI Output:
Interface: 1*HDMI, type A
Output resolutions:
1024x768, 1280x720, 1280x768
1280x1024, 1360x768, 1400x1050
1600x1200, 1680x1050, 1920x1080, 1920x1200
Frequency: 50/60Hz
Two channel HD/SD-SDI audio signals, eight channel HDMI audio signals, or one
channel analog audio can be embedded into the HDMI output signal. The audio channels
can be selected on the Web server to monitor.
HDSDI Output
Interface: 1*HD/SD-SDI, BNC
Impedance: 75 ohms
Format:SMPTE295M (525/625 lines)
SMPTE 292M;1.485,1.485/1.001Gb/s
SMPTE-425;2.970Gps
625i, 525i
720p 50/60;
1080i 50/60;
16
MVS-X-D
1080p 50/60;
Return Loss: ﹥15dB,5MHz to 1.5GHz
The video and embedded audio signals are the same as HDMI output.
Control
Interface: 1*RJ45
Type: 10/100/1000M auto-adapting
Ordering Information
Description
1RU/ smart network ready, dual power supplies (120W), 6 slots
MVS-SD
MVS SD input module
4SDI/Composite (auto switching) video and 4 ch. Analog audio inputs, Tally interface,
audio absence/silence/out-of-range detection, video freezing detection, EDH
detection
MVS-HD
MVS HD input module
4 HD/SD-SDI (auto switching) video and 4 ch. Analog audio inputs,
Tally interface, audio absence/silence/out-of-range detection, video freezing
detection
MVS-HDMI
MVS HDMI input module
4 HDMI video w/ embedded audio inputs, de-embedded audio, Tally interface, audio
absence/silence/out-of-range detection, video freezing detection
1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + HD/SD-SDI outputs
(up to 1080P), 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol
support.
MVS
Model
MVS-1U-CASE
1U chassis
MVS-DWUXGA
MVS output module
1U Compact Multi-viewer system with dual outputs
MVS-X-D
17
MIO DEMUX-HDSDI
3G/HD/SD Signal & Analog Audio De-embedder
MIO DEMUX-HDSDI is a kind of de-embedder based on Mini-Box chassis. It can extract one analog audio stereo signal from a single
serial digital signal, and distribute 3 SDI outputs. It supports SD-SDI, 1.5 Gbps HD-SDI and 3.0 Gbps HD-SDI for inputs and outputs.
MIO DEMUX-HDSDI supplies real-time input signal status indicator and power indicator which make it convenient to monitor. The deembedded audio channel can be selected though DIP Switch.
Key Features
MIO
··one analog audio stereo signal extracted from a single serial digital signal
··Inputs and outputs for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI
··Support self-definition de-embedded audio channel via DIP Switch
··All audio interfaces adopt 3-PIN connector, balanced output
··Supply real-time input signal status indicator and power indicator
··Support bypass function with power on
··Easy to install, and can be widely used in broadcasting system, studios and other professional
audio fields.
Technical Specification
3G/HD/SD Signal & Analog Audio De-embedder
IDigital Video Input
Input interface
1*3G/HD/SD-SDI, BNC
Impedance
75Ω
ResolutionSD
525i 60, 625i 50
HD: 720p 50/60 1080i 50/60
1080p 24/25/30
1080p 50/60
Digital Video Output
Output interface
2*3G/HD/SD-SDI, BNC
1*3G/HD/SD-SDI Loop, BNC
Impedance
75Ω
Signal Level
800mV±10%
Jitter<0.2UI 100KHz
Analog Audio Output
Output interface
2*3pin balance
Impedance
600Ω
Status Indicator
Input signal status indicator
Power indicator
Power
Power consumption12VDC 1A
Size
123mm*92mm*29mm
Order Information
MIO EMB-SDI
MIO EMB-HDSDI MIO DEMUX-SDI
MIO DEMUX-HDSDI
18
MIO DEMUX-HDSDI
SD-SDI & Analog Audio Embedder
3G/HD/SD-SDI & Analog Audio Embedder
SD-SDI & Analog Audio De-embedder
3G/HD/SD-SDI & Analog Audio De-embedder
MIO DEMUX-SDI
SD-SDI & Analog Audio De-embedde
MIO DEMUX-SDI is a kind of de-embedder based on Mini-Box chassis. It can extract one analog audio stereo signal from a single serial
digital signal, and distribute 3 SDI outputs, one of which provides loop-through with power down. And it supports auto-sensing input
format of 525i60/625i50.
MIO DEMUX-SDI supplies real-time input signal status and power indicators which make it convenient to monitor. The de-embedded
audio channel can be selected though DIP Switch.
Key Features
··one analog audio stereo signal extracted from a single serial digital signal
··Support auto-sensing input format of 525i60/625i50
··Support self-definition de-embedded audio channel via DIP Switch
··All audio interfaces adopt 3-PIN connector, balanced output
··Supply real-time input signal status indicator and power indicator
··Support loop-through function with power down
··Easy to install, and can be widely used in broadcasting system, studios and other professional
audio fields.
MIO
Block Diagram
Technical Specification
Digital Video Output
Output interface
2*SD-SDI, BNC
1*SD-SDI Loop, BNC
Impedance
75Ω
Level
800mV±10%
Jitter<0.2UI (100 KHz)
<1UI (10 Hz)
Analog Audio Output
Output interface
2*3pin balance
Impedance
600Ω
Max audio level
+24dBu
Status Indicator
Input signal status indicator
Power indicator
Power
Power consumption12VDC 1A
Size
123mm*92mm*29mm
SD-SDI & Analog Audio De-embedde
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75Ω
ResolutionSD
525i 60, 625i 50
SMPTE 259M-C 270Mb/s
Order Information
MIO EMB-SDI
MIO EMB-HDSDI
MIO DEMUX-SDI
MIO DEMUX-HDSDI
SD-SDI & Analog Audio Embedder
3G/HD/SD-SDI & Analog Audio Embedder
SD-SDI & Analog Audio De-embedder
3G/HD/SD-SDI & Analog Audio De-embedder
MIO DEMUX-SDI
19
MIO EMB-HDSDI
3G/HD/SD Signal & Analog Audio Embedder
The MIO EMB-HDSDI is designed to embed one analog audio stereo signal into a single serial digital signal and output 2 identical serial
digital signals with embedded audio. It supports SD-SDI, 1.5 Gbps HD-SDI and 3.0 Gbps HD-SDI for inputs and outputs. Digital signals
with embedded or non-embedded audio can be used as input signals.
The MIO EMB-HDSDI supplies real-time input signal status indicator and power indicator making it convenient to monitor. The
embedded audio channel can be selected with a DIP Switch.
Key Features
MIO
··1 analog audio stereo signal embedded into a single serial digital signal
··Inputs and outputs for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI
··Support self-definition embedded audio channel via DIP Switch
··All audio interfaces adopt 3-PIN connector, balanced input
··Supply real-time input signal status indicator and power indicator
··Support bypass function with power on
··Easy to install, and can be widely used in broadcasting system, studios and other professional
audio fields.
Technical Specification
3G/HD/SD Signal & Analog Audio Embedder
IDigital Video Input
Input interface
1*3G/HD/SD-SDI, BNC
Impedance
75Ω
Resolution
SD: 525i 60, 625i 50
HD: 720p 50/60
1080p 50/60 1080p 24/25/30
Digital Video Output
Output interface
2*3G/HD/SD-SDI, BNC
1*3G/HD/SD-SDI Loop, BNC
Impedance
75Ω
Level
800mV±10%
Jitter<0.2UI 100KHz
Analog Audio Input
Input interface 2*3pin balance
Impedance
600Ω
Status Indicator
Input signal status indicator
Power indicator
Power
Power consumption12VDC 1A
Size
123mm*92mm*29mm
Order Information
MIO EMB-SDI
MIO EMB-HDSDI
MIO DEMUX-SDI
MIO DEMUX-HDSDI
20
MIO EMB-HDSDI
SD-SDI & Analog Audio Embedder
3G/HD/SD-SDI & Analog Audio Embedder
SD-SDI & Analog Audio De-embedder
3G/HD/SD-SDI & Analog Audio De-embedder
MIO EMB-SDI
SD-SDI & Analog Audio Embedder
The MIO EMB-SDI is designed to embed one analog audio stereo signal into a single serial digital signal and distribute it to 2 identical
serial digital signals with embedded audio. Features include loop-through function with power down and auto-detection of input format
(525i60/625i50). It can be applied to digital signals with both embedded and non-embedded audio for input.
The MIO EMB-SDI supplies real-time input signal status indicator and power indicator, making it convenient to monitor. The embedded
audio channel can be selected though a DIP Switch.
Key Features
··One analog stereo audio signal embedded into a single serial digital signal
··Support auto-sensing input format of 525i60/625i50
··Support self-definition embedded audio channels via DIP Switch
··All audio interfaces adopt 3-PIN connector, balanced input
··Supply real-time input signal status indicator and power indicator
··Support loop-through function with power down
··Easy to install
MIO
Block Diagram
Technical Specification
Analog Audio Input
Input interface 2*3pin balance
Impedance
600Ω
Status Indicator
Input signal status indicator
Power indicator
Power
Power consumption12VDC 1A
Size
123mm*92mm*29mm
SD-SDI & Analog Audio Embedder
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75Ω
Resolution
SD: 525i 60, 625i 50
SMPTE 259M-C 270Mb/s
Digital Video Output
Output interface
2*SD-SDI, BNC
1*SD-SDI Loop, BNC
Impedance
75Ω
Level
800mV±10%
Jitter<0.2UI (100 KHz)
<1UI (10 Hz)
Order Information
MIO EMB-SDI
MIO EMB-HDSDI
MIO DEMUX-SDI
MIO DEMUX-HDSDI
SD-SDI & Analog Audio Embedder
3G/HD/SD-SDI & Analog Audio Embedder
SD-SDI & Analog Audio De-embedder
3G/HD/SD-SDI & Analog Audio De-embedder
MIO EMB-SDI
21
MIO VDA
1x4 Analog composite video distribution amplifier
Based on Mini BOX platform, MIO VDA is a high-quality distribution amplifier which can distribute one analog composite video signal to
four analog composite video signals. For safety and reliability, one of the outputs provides loop through function with power down. And
the device supports automatic input detection of NTSC and PAL standard.
The LED lights on the Mini box indicate the status of input signal and power supply. There are the Gain and HS button installed on the
box. When long distance transmission causes the input signal loss, by rotating the buttons, signal gain and amplitude of horizontal sync
can be adjusted continuously to improve signal quality.
Key Features
··One analog composite video signal input, four analog composite video signal outputs
··Support automatic input detection of NTSC and PAL standard
··Provide loop through function with power down via one of the outputs
··Adjust signal gain and amplitude of horizontal sync by rotating the Gain and HS button
··The LED lights on the Mini box indicate the status of input signal and power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
1x4 Analog composite video distribution amplifier
Analog Video Input
Input interface
1*CVBS BNC
Impedance
75 ohms
Format
PAL/NTSC
Length
≤200 (Belden 8281)
Analog Video Output
Output interface
4*CVBS, BNC
Impedance
75 ohms
Signal amplitude 1Vpp
White level
0.7V
H-sync level
-0.3V
Status indicator
Input signal status indicator
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption
Power 12VDC 1.5A
Dimension
123mm*92mm*29mm
Order Information
MIO ADA
MIO VDA
MIO VSD
MIO VSD-RC
MIO VSD-HD
22
MIO VDA
Analog audio distribution amplifier, 1x4
Analog composite video distribution amplifier, 1x4
SDI signal distribution amplifier, 1x4
SDI signal distribution amplifier with RC, 1x4
HD/SD-SDI signal distribution amplifier with RC, 1x4
MIO VSD
1x4 SDSDI signal distribution amplifier with Reclocking
Based on Mini BOX platform, MIO VSD-RC is a high-quality distribution amplifier which can distribute one SDI signal to 4 outputs with
reclocking. For safety and reliability, one of the outputs provides loop through function with power down. And the device supports SDI
input signal with embedded audio and automatic input detection of 525i 60 and 625i 50 format.
MIO VSD-RC provides automatic signal equalization for up to 300m (Belden 8281), which can improve the signal quality and reduce the
signal loss caused by long distance transmission of input source. The LED lights on the Mini box indicate the status of input signal and
power supply, in order to let the user know the status immediately.
Key Features
··One SDI signal input, four SDI signal outputs with Reclocking
··Support automatic input detection of 525i 60 and 625i 50 format
··Support SDI signal with embedded audio
··Provide loop through function with power down via one of the outputs
··Adopt reclocking of video signals to provide an additional level of signal integrity in long cable
length applications
··Provide signal equalization to improve the signal quality and reduce the signal loss caused by long
distance transmission of input source
··The LED lights on the Mini box indicate the status of input signal and power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
Fall time
≤1500PS 20%-80%
Jitter<0.2UI
Status indicator
Input signal status indicator
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption
Power: 12VDC 1A
Dimension: 123mm*92mm*29mm
1x4 SDSDI signal distribution amplifier with Reclocking
Digital Video Input
Input interface
1*SDSDI BNC
Impedance
75 ohms
Format
525i 60 / 625i 50
SMPTE 259M-C 270Mb/s
Length<300m (Belden 8281)
Digital Video Output
Output interface
4* SDSDI, BNC
Impedance
75 ohms
Format
SMPTE 259M-C 270Mb/s
Level
800mV±10%
Rise time
≤1500PS 20%-80%
Order Information
MIO ADA
MIO VDA
MIO VSD
MIO VSD-RC
MIO VSD-HD
Analog audio distribution amplifier, 1x4
Analog composite video distribution amplifier, 1x4
SDI signal distribution amplifier, 1x4
SDI signal distribution amplifier with Reclocking, 1x4
HD/SD-SDI signal distribution amplifier with Reclocking, 1x4
MIO VSD-RC
23
MIO VSD-HD
1x4 HD/SD-SDI signal distribution amplifier with ReClocking
Based on Mini BOX platform, MIO VSD-HD is a high-quality distribution amplifier which can distribute one HD/SD-SDI signal to 4
outputs with reclocking. And the device supports HD/SD-SDI input signal with embedded audio and automatic input detection of 525i 60,
625i 50, 720p, 1080i, and 1080p format.
MIO VSD-HD provides automatic signal equalization for up to 100m (Belden 1694A), which can improve the signal quality and reduce
the signal loss caused by long distance transmission of input source. The LED lights on the Mini box indicate the status of input signal
and power supply, in order to let the user know the status immediately.
Key Features
··One HD/SD-SDI signal input, four HD/SD-SDI signal outputs with Reclocking
··Support automatic input detection of 525i 60, 625i 50, 720p, 1080i, and 1080p format
··Support HD/SD-SDI signal with embedded audio
··Adopt reclocking of video signals to provide an additional level of signal integrity in long cable
length applications
··Provide signal equalization to improve the signal quality and reduce the signal loss caused by
long distance transmission of input source
··The LED lights on the Mini box indicate the status of input signal and power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
1x4 Analog composite video distribution amplifier
Digital Video Input
Input interface
1*HD/SD-SDI BNC
Impedance
75 ohms
Format
525i 60, 625i 50
720p 50/60
1080i 50/59.94/60
1080p 30/29.97/25/24/23.98
1080p 50/59.94/60
Length
≤100m (Belden 8281)
Digital Video Output
Output interface
4* HD/SD-SDI, BNC
Impedance
75 ohms
Format
SMPTE-259M-C 270Mb/s
SMPTE-292M 1.485Gps
SMPTE-425 2.970Gps
Level
800mV±10%
Jitter<0.2UI (100 KHz)
Status indicator
Input signal status indicator
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption
Power
12VDC 1A
Dimension
123mm*92mm*29mm
Order Information
MIO ADA
MIO VDA
MIO VSD
MIO VSD-RC
MIO VSD-HD
24
MIO VSD-HD
Analog audio distribution amplifier, 1x4
Analog composite video distribution amplifier, 1x4
SDI signal distribution amplifier, 1x4
SDI signal distribution amplifier with Reclocking, 1x4
HD/SD-SDI signal distribution amplifier with Reclocking, 1x4
MIO ADA
1x4 Analog audio distribution amplifier
The MIO AD-AUD is a high-quality, 24-bit analog to digital audio converter designed to convert 2 channels of analog audio stereo signals
into 2 AES audio outputs. The device provides a variety of full-scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu).
Analog audio adopts balanced mode, while digital audio adopts BNC interface with unbalanced mode. The left and right channels can
be combined via a DIP switcher to form one AES signal.
Key Features
··One channel analog audio signal input, four analog audio signal outputs
··Adopt 3-pin interface (balanced mode) for input and output
··Provide loop through function with power down via one of the outputs
··Adjust signal gain of audio outputs by rotating the Gain button
··The LED lights on the Mini box indicate the status of input signal and power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
Status indicator:
Input signal status indicator
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption:
Power: 12VDC 1.5A
Dimension: 123mm*92mm*29mm
1x4 Analog audio distribution amplifier
Analog Audio Input
Input signal
1*Analog Audio
Interface
3-pin, balanced
Impedance
600 ohms
Frequency response 20 Hz-20 KHz <±0.25dB
Analog Audio Output
Output signal
4*Analog Audio
Interface
3-pin, balanced
Impedance
600 ohms
Frequency response 20 Hz-20 KHz <±0.25dB
Order Information
MIO ADA
MIO VDA
MIO VSD
MIO VSD-RC
MIO VSD-HD
Analog audio distribution amplifier, 1x4
Analog composite video distribution amplifier, 1x4
SDI signal distribution amplifier, 1x4
SDI signal distribution amplifier with RC, 1x4
HD/SD-SDI signal distribution amplifier with RC, 1x4
MIO ADA
25
MIO DA-AUD
AES to analog audio converter
The MIO DA-AUD is a high-quality, 24-bit converter designed to convert 2 AES signals to 2 analog audio stereo outputs. The device
provides a variety of full scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu). Analog audio adopts balanced mode,
while digital audio adopts BNC interface with unbalanced mode. Channels of AES can be combined flexibly to form the left and right
channels of analog audio via a DIP switch.
Key Features
··Two AES audio signals input, two analog audio stereo signals output
··Adopt BNC interface (unbalanced mode) for input and 3-pin interface (balanced mode) for outputs
··Adopts 24bit processing
··Combine two channels of AES flexibly to form the left and right channel of analog audio via DIP
switcher
··Provide a variety of full scale standards (+18dBu/ +20dBu/ +22dBu/ +24dBu)
··The LED light on the Mini box indicate the status of power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
AES to analog audio converter
Digital Audio Input
Input signal
2*AES
Interface
BNC, unbalanced
Standard
AES3 (SMPTE 276M)
Impedance
75 ohms
Max Level
0dBFS
Analog Audio Output
Output signal
2*Analog Stereo
Interface
3-pin, balanced
Impedance
600 ohms
Frequency response<±0.04dB @ 20Hz 20KHz
THD+N
90dB @ 1KHz
Order Information
MIO AD-AUD
MIO DA-AUD
26
MIO DA-AUD
Analog audio to AES converter
AES to Analog audio converter
Status indicator
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption
Power
12VDC 1A
Dimension
123mm*92mm*29mm
MIO AD-AUD
Analog audio to AES converter
Based on Mini BOX platform, MIO AD-AUD is a high-quality converter which can convert two analog audio stereo signals to two
AES audio outputs. The device provides a variety of full scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu), which
maximizes to meet the requirements of the clients around the world. Analog audio adopts balanced mode, while digital audio adopts
BNC interface with unbalanced mode.
MIO AD-AUD adopts 24bit processing to ensure high quality of audio signal after the conversion. The left and right channel can be
combined flexibly via DIP switcher to form one AES signal. LED indicator is provided to show the status of power supply.
Key Features
··Two analog audio stereo signals input, two AES audio signals output
··Adopt 3-pin interface (balanced mode) for input and BNC interface (unbalanced mode) for outputs
··Adopts 24bit processing
··Combine the left and right channel flexibly via DIP switcher to form one AES signal
··Provide a variety of full scale standards (+18dBu/ +20dBu/ +22dBu/ +24dBu)
··The LED light on the Mini box indicate the status of power supply
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
MIO
Block Diagram
Technical Specification
Status indicator:
Power indicator
(Indicate by shining or extinguishing of the green LED)
Power consumption
Power
12VDC 1A
Dimension
123mm*92mm*29mm
Analog audio to AES converter
Analog Audio Input
Input signal
2*Analog Stereo
Interface
3-pin, balanced
Impedance
600 ohms
Frequency response20 Hz-20 KHz <±0.25dB
Digital Audio Output
Output signal
2*AES
Interface
BNC, unbalanced
Standard
AES3 (SMPTE 276M)
Impedance
75 ohms
Max Level
0dBFS
Order Information
MIO AD-AUD
MIO DA-AUD
Analog audio to AES converter
AES to Analog audio converter
MIO AD-AUD
27
MIO DEC
Analog video to SDSDI mini converter
The MIO DEC is a compact 1x2 analog video to SDI video converter. The MIO DEC converts one channel of analog video (CVBS/YUV/
YC) to two identical channels of SDI video, perfect for converting from analog HD/SD component, NTSC, or PAL. The output supports
SDI video in both the 525i 60 & 625i 50 format.
Known for its compact functioning, the MIO DEC is widely used in a variety of professional fields such as TV program post production,
studios, broadcasting, etc.
Key Features
··Analog video (CVBS/YUV/YC) to SDI video conversion
··Select the analog input (CVBS/YUV/YC) by DIP Switch
··Broadcast quality with 10 bit processing
··LED lights indicate the status of input signal and the power
··Be widely used in variety of environments
MIO
Block Diagram
Technical Specification
Analog video to SDSDI mini converter
Analog video input
Input interface
3*BNC connection
(Selectable CVBS/YUV/YC input model)
Impedance
75Ω
System
PAL/NTSC
Max cable length: 200M (Belden 8281)
Digital video output:
Output interface
2*SDI, BNC connection
Impedance
75Ω
Format
SMPTE 259M-C 270Mb/s
525i60/625i50
Signal Level
800mV±10%
Rise time
750~1500PS 20%-80%
Fall time
750~1500PS 20%-80%
The difference between rise and fall: ≤500PS
Jitter<0.2UI
Status indicator
Input signal status indicator
Power indicator(Indicate by shining or extinguishing of the green
LED)
Power consumption
Powe
12VDC 1A
Dimension
123mm*92mm*29mm
Order Information
MIO ENC MIO DEC MIO ENC-AUD
MIO DEC-AUD
MIO ENC-HD-AUD MIO DEC-HD-AUD 28
MIO DEC
SDI video to analog video converter
Analog video to SDI video converter
SDI to analog video and audio converter
Analog video and audio to SDI video converter
3G/HD/SD to analog video and audio converter
Analog video and audio to 3G/HD/SD video converter
MIO DEC-AUD
Analog video and audio to SDSDI mini converter
The MIO DEC-AUD is a small, high-quality analog video to SDI video converter. The MIO DEC-AUD converts one channel of analog
video (CVBS/YUV/YC) to two identical SDI video channels while embedding one analog stereo audio signal into each serial digital
signal. The format of the input signal can be NTSC or PAL. The output supports SDI video in both the 525i 60 and 625i 50 formats.
Known for its compact functioning, the converter is widely-used in TV program post production, studios, broadcasting, etc.
Key Features
··Analog video (CVBS/YUV/YC) to SDI video conversion
··Select the analog input (CVBS/YUV/YC) by DIP Switch
··Adopt 3-pin interface as audio interface
··Broadcast quality with 10 bit processing and 48KHz audio sampling
··LED lights indicate the status of input signal and the powe
MIO
Block Diagram
Technical Specification
525i60/625i50
Signal Level
800mV±10%
Rise time
750~1500PS 20%-80%
Fall time
750~1500PS 20%-80%
The difference between rise and fall: ≤500PS
Jitter<0.2UI
Status indicator
Input signal status indicator
Power indicator (Indicate by shining or extinguishing of the green
LED)
Power consumption
Power:
12VDC 1A
Dimension:
123mm*92mm*29mm
Analog video and audio to SDSDI mini converter
IAnalog video input
Input interface
3*BNC connection
(Selectable CVBS/YUV/YC input model)
Impedance
75Ω
System
PAL/NTSC
Max cable length 200M (Belden 8281)
Analog audio Input
Input interface
2*3pin (Balanced)
Impedance
600Ω
Digital video output
Output interface
2*SDI, BNC connection
Impedance
75Ω
Format
SMPTE 259M-C270Mb/s
Order Information
MIO ENC
MIO DEC
MIO ENC-AUD
MIO DEC-AUD
MIO ENC-HD-AUD
MIO DEC-HD-AUD
SDI video to analog video converter
Analog video to SDI video converter
SDI to analog video and audio converter
Analog video and audio to SDI video converter
3G/HD/SD to analog video and audio converter
Analog video and audio to 3G/HD/SD video converter
MIO DEC-AUD
29
MIO ENC-HD-AUD
3G/HD/SD to analog video and audio converter
Based on Mini BOX platform, MIO ENC-HD-AUD is a small converter which can convert 3G/HD/SD-SDI to one channel optional CVBS/
YUV/YC, and supports the input format of 525i 60, 625i 50, 720p, 1080i and 1080p.
It can extract one analog audio stereo signal from a single serial digital signal. It provides SDI Loop-out to extend other application.
The de-embedded audio channels and analog video output mode can be selected through DIP Switch. The LED lights on the Mini box
indicate the status of input signal and power, so as to let the user know the information immediately.
Key Features
··Input signal for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI
··one analog audio stereo signal extracted from a single serial digital signal
··Select the mode of analog output (CVBS/YUV/YC) freely via DIP Switch
··Support self-defined de-embedded audio channel via DIP Switch
··All audio interfaces adopt 3-PIN connector, balanced output
··Supply real-time input signal status indicator and power indicator
MIO
Block Diagram
Technical Specification
3G/HD/SD to analog video and audio converter
Digital Video Input
Input interface
1*3G/HD/SD-SDI, BNC connection
Impedance
75Ω
Format
525i 59.94, 625i 60
720p 50/59.94, 1080i 50/59.94
1080p 50/59.94
Analog video Output
Output interface
3*BNC connection
(Can be set as CVBS/YUV /YC output mode)
Impedance
75Ω
Digital video loop output
Output interface
1*3G/HD/SD-LOOP, BNC connection
Impedance
75Ω
Format
SMPTE 259M-C 270Mb/s
SMPTE-292M 1.485Gps
SMPTE-425 2.970Gps
Eye pattern
800mV±10%
Jitter<0.2UI
Analog audio output
Output interface
2*3pin (Balanced)
Impedance
600Ω
Status indicator
Input signal status indicator;
Power indicator (Indicate by shining or extinguishing of the green
LED)
Power consumption
Power
12VDC 1 A
Dimension
123mm*92mm*29mm
Order Information
MIO ENC
MIO DEC
MIO ENC -AUD MIO DEC-AUD
MIO ENC-HD-AUD
MIO DEC-HD-AUD
30
MIO ENC-HD-AUD
SDI video to analog video converter
Analog video to SDI video converter
SDI to analog video and audio converter
Analog video and audio to SDI video converter
3G/HD/SD to analog video and audio converter
Analog video and audio to 3G/HD/SD video converter
MIO ENC
SDI to analog video converter
Based on Mini BOX platform, MIO ENC converts SDI signal to analog video signal. The analog video output can be selected as the
output mode of CVBS, YUV, or YC optionally via DIP switch, also NTSC/PAL for output are supported. MIO ENC provides auto-sensing
input format of 525i60/625i50.
It provides SDI-Loop output to extend other application. The LED lights indicate the status of input signal and power. Be known for
compact function, the converter is widely used in variety of environments, like TV program post production, studio, broadcast, etc.
Key Features
··Convert SDI to analog video effectively with high quality
··CVBS/YUV/YC are selected optionally by DIP Switch on side of box
··Support NTSC/PAL for output
··Broadcast quality with 10 bit processing
··LED lights indicate the statues of input signal and power
MIO
Block Diagram
Technical Specification
Eye pattern
800mV±10%
Jitter<0.2UI 100KHz
The difference between rise and fall: ≤500PS
Status indicator
Input signal status indicator;
Power indicator (Indicate by shining or extinguishing of the green
LED)
Power consumption
Power
12VDC 1 A
Dimension
123mm*92mm*29mm
SDI to analog video converter
Digital Video Input
Input interface
1*SDI, BNC connection
Impedance:
75Ω
Format
525i 60/ 625i 50
Jitter<0.2UI 100KHz
Analog video Output
Output interface
3*BNC connection
(Can be set as CVBS/YUV /YC output mode)
Impedance
75Ω
Digital video output
Output interface
1*SDI-Loop, BNC, 75Ω
Format
SMPTE 259M-C 270Mb/s
Order Information
MIO ENC
MIO DEC
MIO ENC -AUD MIO DEC-AUD
MIO ENC-HD-AUD
MIO DEC-HD-AUD
SDI video to analog video converter
Analog video to SDI video converter
SDI to analog video and audio converter
Analog video and audio to SDI video converter
3G/HD/SD to analog video and audio converter
Analog video and audio to 3G/HD/SD video converter
MIO ENC
31
MIO ENC-AUD
SDSDI to analog video and dual analog audio converter
Based on Mini BOX platform, MIO ENC-AUD converts SDI to analog video and two channel analog audio. The analog video output can
be selected as the output mode of CVBS, YUV, or YC optionally via DIP switch, also NTSC/PAL for output are supported. MIO ENC
provides auto-sensing input format of 525i60/625i50.
It provides SDI-Loop output to extend other application. The LED lights indicate the status of input signal and power. Be known for
compact function, the converter is widely used in variety of environments, like TV program post production, studio, broadcast, etc.
Key Features
··Select the mode of analog output (CVBS/YUV/YC) freely via DIP Switch
··Support NTSC/PAL for output
··Broadcast quality with 10 bit processing
··Support self-defined de-embedded audio channel via DIP Switch
··LED lights indicate the statues of input signal and power
MIO
Block Diagram
Technical Specification
SDSDI to analog video and dual analog audio converter
Digital video output:
Output interface: 1*SDI-LOOP, BNC 75Ω
Format:
SMPTE 259M-C;270Mb/s
Eye pattern:
800mV±10%
Rise time:
750~1500PS(20%-80%)
Fall time:
750~1500PS(20%-80%)
The difference between rise and fall: ≤500PS
Jitter:
<0.2UI
Status indicator:
Input signal status indicator ;
Power indicator (Indicate by shining or extinguishing
of the green LED)
Power consumption:
Power:
12VDC 1 A
Dimension:
123mm*92mm*29mm
Analog audio output:
Output interface: 2*3pin (Balanced)
Impedance:
600Ω
Order Information
MIO ENC
MIO DEC
MIO ENC -AUD MIO DEC-AUD
MIO ENC-HD-AUD
MIO DEC-HD-AUD
32
MIO ENC-AUD
SDI video to analog video converter
Analog video to SDI video converter
SDI to analog video and audio converter
Analog video and audio to SDI video converter
3G/HD/SD to analog video and audio converter
Analog video and audio to 3G/HD/SD video converter
MIO HDMI-CEXT
DVI/HDMI signal coaxial cable extender
MIO HDMI-CEXT is a DVI/HDMI coaxial cable extender, which is compose of a transmitter and receiver. The transmitter converts the
DVI/HDMI signal to serial data and transmits it via a coaxial cable with BNC interface; the receiver receives the serial data and recovers
the original DVI/HDMI signal with high quality eventually. This extender avoids the serious issue of signal loss caused by a long DVI/
HDMI cable for long-distance transmission. The maximum transmission distance is 100m (Belden 1694A).
MIO HDMI-CEXT supports DVI/HDMI input formats of 525i, 625i, 720p, 1080i, and 1080p. Although the device adopts DVI interface, the
HDMI signal with embedded audio also can be transmitted by using a DVI-to-HDMI adapter or cable, and the original signal, especially
the embedded audio, is recovered through the receiver with HDMI interface.
Key Features
··Support DVI/HDMI input formats of 525i, 625i, 720p, 1080i, and 1080p,
and automatic input rate detection
··Extend DVI/HDMI signal up to 100m (Belden 1694A) without distortion
··Support transmission of the HDMI signal with embedded audio
··Adopt a coaxial cable with BNC interface to transmit the data safely
··Provide a loop-out interface by receiver
··Mini box structure easily installed inside frame racks, video walls and
so on
··Widely used in broadcasting system, studios and other professional
fields
MIO HDMI-CEXT-T
MIO HDMI-CEXT-R
Technical Specification
MIO
MIO HDMI-CEXT-T
Input
Input interface
1*DVI-I (digital signal), Female
Resolution
supports the resolutions as following:
SD:625i 50, 525i 60;
HD:720P 50/59.94/60, 1080I 50/59.94/60,
1080P 30/29.97/25/24/23.98, 1080P 50/60
Output
Output interface
1* coaxial cable, BNC connector
Physical characteristics
Power: 12VDC 1A
Size: 123mm*92mm*29mm
MIO HDMI-CEXT-R
Input
Input interface
1* coaxial cable, BNC connector
Max distance
100 meters Belden 1694
Output
Output interface
1*cable loop out, BNC connector
1*DVI-I (digital signal), Female
Physical characteristics
Power
12VDC 1A
Size
123mm*92mm*29mm
DVI/HDMI signal coaxial cable extender
Order Information
MIO HDMI-CEXT
MIO HDSDI-HDMI MIO HDMI-HDSDI
MIO SDI-DVI/HDMI MIO AV-DVI/HDMI MIO HDSDI-DVI/HDMI DVI/HDMI signal coaxial cable extender
HD/SD-SDI to DVI/HDMI converter
DVI/HDMI to HD/SD-SDI converter
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Analog AV to DVI/HDMI converter with network and video & audio monitoring
HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring
MIO HDMI-CEXT
33
MIO HDSDI-HDMI
HD/SD-SDI to DVI/HDMI converter
MIO HDSDI-HDMI is a high-quality video and audio converter which can convert HD/SD-SDI signal to DVI or HDMI signal for digital
display devices, such as LCD, DLP, and Plasma. We can adjust output resolution and audio channel by DIP switch on the one side of
box.
MIO HDSDI-HDMI supports HD/SD-SDI input formats of 525i, 625i, 720p, 1080i, and 1080p. It provides SDI-Loop output to extend
other applications. Although the device adopts DVI output interface, the HDMI signal can be obtained by using a DVI to HDMI adapter or
cable. In HDMI mode, the SDI audio are embedded into HDMI signal.
Key Features
MIO
··Convert HD/SD-SDI signal to high-quality DVI or HDMI signal
··Support HD/SD-SDI input formats of 525i, 625i, 720p, 1080i, and 1080p select and automatic
input rate detection
··Output resolution adjustable by DIP switch
··Support embedded audio HDMI output via DVI interface with the DVI to HDMI adapt
··Provides SDI-Loop output to extend other applications
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
Technical Specification
HD/SD-SDI to DVI/HDMI converter
Input
Input interface
Impedance
Standard
Format
Length
1* HD/SD-SDI, BNC
75 ohms
SMPTE-259M-C 270Mb/s
SMPTE-292M 1.485Gps
SMPTE-425 2.970Gps
480i 60 576i 50 720p 50/59.94/60
1080i 50/59.94/60 1080P 50/59.94/60
≤100m (Belden 1694A)
Output
Output interface
1 HD/SD-SDI Loop output
1*DVI-I (digital signal), female
DVI output resolution
1024x768 1280x720 1280x768 1280x800 1280x9601280x1024
1360x768 1400x1050 1600x900 1600x1200 1680x1050
1920x1080 1920x1200 AUTO mode
Physical characteristics
Power
12VDC 1A
Size
123mm*92mm*29mm
Order Information
MIO HDMI-CEXT
MIO HDSDI-HDMI
MIO HDMI-HDSDI
MIO SDI-DVI/HDMI MIO AV-DVI/HDMI
MIO HDSDI-DVI/HDMI 34
MIO HDSDI-HDMI
DVI/HDMI signal coaxial cable extender
HD/SD-SDI to DVI/HDMI converter
DVI/HDMI to HD/SD-SDI converter
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Analog AV to DVI/HDMI converter with network and video & audio monitoring
HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring
MIO HDMI-HDSDI
DVI/HDMI to HD/SD-SDI converter
MIO HDMI-HDSDI is a high-quality video and audio converter which can convert DVI or HDMI signal to HD/SD-SDI signal. The entire
conversion doesn’t need any configuration so that the operation is very convenient. It provides one HD/SD-SDI output with clear eye
pattern and other high-quality signal specifications.We can adjust output format channel by DIP switch on the one side of box
MIO HDMI-HDSDI supports output formats of 525i, 625i, 720p, 1080i, and 1080p. Although the device adopts DVI interface, the HDMI
signal with embedded audio also can be processed by using a DVI-to-HDMI adapter or cable. And the HDMI audio are embedded into
the HD/SD-SDI output.
Key Features
MIO
··Convert DVI or HDMI signal to high-quality HD/SD-SDI signal
··Support DVI/HDMI input up to 1920*1200P and automatic input rate detection
··Output format adjustable by DIP switch,480i 59.94/576i 50/720p/1080i/1080p selectable
··Support HDMI signal with embedded audio and output embedded HD/SD-SDI
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
High quality SDI signal output
Technical Specification
DVI/HDMI to HD/SD-SDI converter
Input
Input interface
1*DVI-I, Female
Resolution
1024x768 1280x720 1280x768 1280x800 1280x9601280x1024
1360x768 1400x1050 1600x900 1600x1200 1680x1050
1920x1080 1920x1200 Output
Output interface
1* HD/SD-SDI, BNC interface
Impedance
75 ohms
Standard
SMPTE-259M-C 270Mb/s
Format
SMPTE-292M 1.485Gps
SMPTE-425 2.970Gps
480i 60 576i 50 720p 50/59.94/60
1080i 50/59.94/60 1080P 50/59.94/60
Level
800mV±10%
Jitter<0.2UI (100 kHz)
Physical characteristics
Power
12VDC 1A
Size
123mm*92mm*29mm
Order Information
MIO HDMI-CEXT
MIO HDSDI-HDMI
MIO HDMI-HDSDI
MIO SDI-DVI/HDMI MIO AV-DVI/HDMI
MIO HDSDI-DVI/HDMI DVI/HDMI signal coaxial cable extender
HD/SD-SDI to DVI/HDMI converter
DVI/HDMI to HD/SD-SDI converter
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Analog AV to DVI/HDMI converter with network and video & audio monitoring
HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring
MIO HDMI-HDSDI
35
MIO HDSDI-DVI/HDMI
HD/SD-SDI to DVI/HDMI converter with video & audio monitoring
Based on Mini BOX platform, MIO HDSDI-DVI/HDMI is a high-quality video and audio converter which can convert one HD/SD-SDI
signal to DVI or HDMI signal for digital display devices, such as LCD, DLP, LED,and Plasma, with output two channel analog audio
signals optional. MIO HDSDI-DVI/HDMI can be controlled by Ethernet network via IE browser, which is convenient to configure the
display parameters. The device provides various output resolutions and audio and video detection, such as signal loss, signal freeze,
audio silence and so on. The UMD can be and defined freely. And it supports Tally ,AFD.waveformand audio meters display.
Key Features
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
··Provide various output resolutions up to 1920x1080px60
··Provide audio and video monitoring and alarm, such as signal loss, signal freeze, audio silence
and so on
··Support UMD display of program and edit the UMD content freely
··Build-in web server to control the device with user-friendly interface
··Support tally and audio meters display
··Support several display mode: 4:3, 16:9, and full screen
Technical Specification
MIO
Video Input
Input interface
Standard
Format
HDSD-SDI to DVI/HDMI converter with video & audio monitoring
Order Information
MIO HDMI-CEXT
MIO HDSDI-HDMI
MIO HDMI-HDSDI
MIO SDI-DVI/HDMI MIO AV-DVI/HDMI MIO HDSDI-DVI/HDMI 36
MIO HDSDI-DVI/HDMI
1* HD/SD-SDI, BNC 75 ohms
SMPTE-259M-C 270Mb/s
SMPTE-292M 1.485Gps
SMPTE-425 2.970Gps
480i 60 576i 50 720p 50/60
1080i 50/60 1080P 50/60
≤100m (Belden 1694A)
Length
Video Output
Output interface
1*DVI-I, female
Resolution
1024x768x60p, 1280x768x50p
1280x768x60, 1280x1024x60p
1280x720x60p, 1360x768x60p
1366x768x60p, 1400x1050x60p
1600x900x60p, 1600x1200x60p
1920x1080x50p, 1920x1080x60p
Optional
Analog Audio Output interface2*RCA
Max lever
+24dBu
GPI
RCA, Tally (high level 3.3VDC)
Control
Ethernet network RJ45, 10/100/1000M
Physical characteristics
Power
12VDC 1A
Size
123mm*92mm*29mm
DVI/HDMI signal coaxial cable extender
HD/SD-SDI to DVI/HDMI converter
DVI/HDMI to HD/SD-SDI converter
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Analog AV to DVI/HDMI converter with network and video & audio monitoring
HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring
MIO SDI-DVI/HDMI
SD-SDI to DVI/HDMI converter with video & audio monitoring
Based on Mini BOX platform, MIO SDI-DVI/HDMI is a high-quality video and audio converter which can convert one SDSDI signal to
DVI or HDMI signal for digital display devices, such as LCD, DLP, and Plasma, and output two channel analog audio signals.
MIO SDI-DVI/HDMI can be controlled by Ethernet network via IE browser, which is convenient to configure the display parameters. The
device provides various output resolutions and audio and video detection, such as signal loss, signal freeze, audio silence and so on.
The UMD content of program can be defined freely. And it supports Tally and audio meters display.
Key Features
··Mini box structure easily installed inside frame racks, video walls and so on
··Widely used in broadcasting system, studios and other professional fields
··Provide various output resolutions up to 1920x1080px60
··Provide audio and video monitoring and alarm, such as signal loss, signal freeze, audio silence
and so on
··Support UMD display of program and edit the UMD content freely
··Build-in web server to control the device with user-friendly interface
··Support tally and audio meters display
··Support several display mode: 4:3, 16:9, and full screen
Technical Specification
MIO
Video Input
Input interface
1* SD-SDI, BNC 75 ohms
Standard
SMPTE-259M-C 270Mb/s
Format
480i 60 576i 50
Length
≤100m (Belden 1694A)
Video Output
Output interface
1*DVI-I, female
Resolution
1024x768x60p, 1280x768x50p
1280x768x60, 1280x1024x60p
1280x720x60p, 1360x768x60p
1366x768x60p, 1400x1050x60p
1600x900x60p, 1600x1200x60p
1920x1080x50p, 1920x1080x60p
Optional
Analog Audio Output interface2*RCA
Max lever
+24dBu
GPI
RCA, Tally (high level 3.3VDC)
Control
Ethernet network RJ45, 10/100/1000M
Physical characteristics
Power
12VDC 1A
Size
123mm*92mm*29mm
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Order Information
MIO HDMI-CEXT
MIO HDSDI-HDMI
MIO HDMI-HDSDI
MIO SDI-DVI/HDMI MIO AV-DVI/HDMI MIO HDSDI-DVI/HDMI DVI/HDMI signal coaxial cable extender
HD/SD-SDI to DVI/HDMI converter
DVI/HDMI to HD/SD-SDI converter
SD-SDI to DVI/HDMI converter with network and video & audio monitoring
Analog AV to DVI/HDMI converter with network and video & audio monitoring
HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring
MIO SDI-DVI/HDMI
37
VIO DCO
2CH HD/SD SDI Signal Auto Change Over
VIO DCO is an SDI auto change over which can monitor 2channels SD SDI input signals (Main/Backup), and switches automatically
to the subordinated one when the current selected output channel going wrong. The VIO DCO automatically switches according to the
following conditions, such as signal loss/abnormal or missing of Sync signal,etc. It supplies voice and light alarm which will awake the
operator to deal with the accident. The remote control panel for it also is supported, the operator can go with it more easily.
The SNMP and RS-232 control protocol are also built in the machine. All the configuration and operation can be done by many ways,
which are MCU on front panel, browser, SNMP and RS-232.
Key Features
··20 bit high quality digital processing
··fully compatible with standard and hd signal
··Support embedded SDI signal
··Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
··Support real-time signal loss detecting and channel quality detection
··Support automatic and manual signal switching
··Supply different voices and volumes for kinds of alarm types
··Real-time remote control and monitor
··Many control ways: front panel MCU, RCP, IE browser, and
RS-232
··supprt SNMP
··Standard 1U frame with redundant PSU unites and fans
VIO
Block Diagram
2CH SD/HD SDI Signal Auto Change Over
Technical Specification
Reference
Signal style
Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
Input interface
1*BNC, 75Ω
Output interface:
1*BNC loop output
SDI Input/l output
Input number
2*SDI, BNC
Output number
2*SDI, BNC, (one is bypass )
Signal Formats
SMPTE 259M270Mb/s
SMPTE 292M; 1.485Gb/s
Order Information
VIO DCO-SD VIO DCO-HD VIO DCO-RCP 38
VIO DCO
2 CH SD-SDI signal auto change over
2CH HD/SD-SDI signal change over
Remote control panel for VIO DCO
Contrl Interface
Network
1*RJ45 1000M Enternet
GPI
2*GPI
Serrial
1*DB15 RS232
MCU on front control panel
Output alarm configuration/Sync alarm configuration
Status director
PSU LED
Physics
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
VIO DSK
Dual ch. HD/SD-SDI downstream keyer
VIO DSK is a high definition downstream keyer to mix the serial component digital key and fill HD signals from logo generators or/and
character generator machines in HD living program. It incorporates the latest technology to provide an advanced fully digital keyer. VIO
DSK provides SDI output for preview, two SDI program outputs which one is bypass output without power supply. Remote control panel
going together with it will be putted on the operator desk so users can control keys down or up freely and easily. VIO DSK is ideal for the
"On-Air" environment. The SNMP and RS-232 control protocol are built in the machine. All the configuration and operation can be done
by three ways, which are MCU on front panel,IE on PC and remote control panel.
Key Features
··20 bit signal processing
··Program output bypass protected for on-air applications
··Supply clean output and preview output
··Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
··Auto-timing key, fill, and background inputs (up to 1 line)
··Supply GPI and RS-232/422 control interface
··Supply RCP for remote control
··Full control and status is provided from the front panel display
··Built-in Web Server
··Support SNMP
··Standard 1U frame
··Redundant PSU unites and fans
VIO
Block Diagram
Technical Specification
Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
1*BNC, 75Ω
1*BNC loop output
Video(PGM) input
Input interface
1* HD/SD-SDI, BNC, 75Ω
Video output
Output interface
4*HD/SD-SDI, BNC, 75Ω
(2*PGM utput,one is bypass)
(1*clean output and 1*preview utput)
Digital (FILL) video input
Input interface
2*HD/SD-SDI, BNC, 75Ω
Digital (KEY) video input
Input interface
2*HD/SD-SDI, BNC, 75Ω
Video format
SMPTE 259M 270Mb/s
SMPTE 292M; 1.485Gb/s
Contrl Interface
Network
1*RJ45 1000M Enternet
GPI
2*GPI
Serrial
1*DB15 RS232
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
2CHDual
SD ch.
SDIHD/SD-SDI
Signal Auto
Change Over
keyer
Reference
Signal style
Input interface
Output interface:
Order Information
VIO DSK-HD VIO DSK-SD VIO DSK-RCP
Dual ch. HD/SD-SDI keyer
Dual ch. SD-SDI keyer
Dual ch. HD/SD-SDI keyer remote control panel
VIO DSK
39
VIO DLK
Dual ch. HD/SD-SDI keyer and logo insert
VIO DLK series is a complete HD/SD Keyer with inner Logo insertion that will key one-or more (up to 4) static/animated "bugs" over
an HD or SD video signal. It has a built-in web server, through the Internet explorer browser, user can create logos via importing
TGA\TAG series\AVI\MOV etc format pictures . The size of each logo is variable and ranges from 1/25th to full screen. The position and
transparency of the logo are programmable.
VIO DLK provides SDI output for preview, two SDI program outputs which one is bypass output without power supply. Remote control
panel going together with it will be putted on the operator desk so users can control keys down or up freely and easily. VIO DLK is ideal
for the "On-Air" environment.
Key Features
··Embedded HD/SD SDI compatible
··20 bit processing
··100% linear keying with adjustable transparency
··upply clean output and preview output
··EDH inserted on program output
··Auto timing of program, key and fill
··Supply GPI and RS-232/422control interface,LTC timing
··Supply RCP for remote control
··Full control and status is provided from the front panel display
··Built-in Web Server
··Support SNMP
··Standard 1U frame with redundant PSU unites and fans
VIO
Block Diagram
Technical Specification
2CH SD/HD SDI Keyer and logo insert
Reference
Signal style
Input interface
Output interface:
Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
1*BNC, 75Ω
1*BNC loop output
Video(PGM) input
Input interface
1* HD/SD-SDI, BNC, 75Ω
Video output
Output interface
4*HD/SD-SDI, BNC, 75Ω
(2*PGM utput,one is bypass)
(1*clean output and 1*preview utput)
Digital (FILL) video input
Input interface
2*HD/SD-SDI, BNC, 75Ω
Order Information
VIO DLK
VIO DLK-RCP
40
VIO Keyer-HDL
Digital (KEY) video input
Input interface
2*HD/SD-SDI, BNC, 75Ω
Video format
SMPTE 259M 270Mb/s
SMPTE 292M; 1.485Gb/s
Contrl Interface
Network
1*RJ45 1000M Enternet
GPI
2*GPI
Serrial
1*DB15 RS232
LTC
1*XLR
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Dual ch. HD/SD-SDI keyer & logo generator
Dual ch. HD/SD-SDI keyer & logo generator remote control panel
VIO DLG
HD/SD-SDI logo generator series
VIO DLG series is a high performance and cost-effective HD/SD-SDI logo generator. With 128 Mbytes memory, it can store 1-4 fullbandwidth logos uncompressed 4:2:2 quality still and/or motion logos with its own luminance key channel. It has a built-in web server,
through the IE browser in control PC, user can create logos via importing TGA series MOV etc format pictures . The size of each logo is
variable and ranges from 1/25th to full screen. The position of the logo is programmable.
The SNMP and RS-232 control protocol are also built in the machine. All the configuration and operation can be done by four ways,
which are MCU on front panel, browser, SNMP and RS-232.
Key Features
··20 bit processing, full-bandwidth HDSDI video format
·· Uncompressed 4:2:2 still or motion logo
··Up to four static and/or motion “bugs” display simultaneously
··LTC/EBU time correction with the system main clock
··Position \size\ of logos changed freely and conveniently by Web UI
··Four control modes: front panel MCU, IE browser, SNMP and RS-232
··Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync
··Real-time remote control and monitor
··Standard 1U frame,
·· Redundant PSU unites and fans
VIO
Block Diagram
Technical Specification
Tri-Level Sync. or NTSC/PAL Bi-Level Sync.
1*BNC, 75Ω
1*BNC loop output
Digital (FILL) video output
Output interface
2*HD/SD-SDI, BNC, 75Ω
Format
SMPTE 259M 270Mb/s
SMPTE 292M; 1.485Gb/s
Digital (KEY) video output
Output interface
2*HD/SD-SDI, BNC, 75Ω
Format
SMPTE 259M 270Mb/s
SMPTE 292M; 1.485Gb/s
Order Information
VIO DLG-SD VIO DLG-HD HD/SD-SDI logo generator series
Reference
Signal style
Input interface
Output interface:
Inner Setting
Image phase adjustment: H/V
Key delay
0-32 pixel
White/black key
white/black
Step length
1/5/10/50/100
Status director:
LCD display, LOGO and menu
Contrl Interface
Network
1*RJ45 1000M Enternet
GPI
2*GPI
Serrial
1*DB15 RS232
LTC
1*XLR
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
SD-SDI logo generator
SD/HD-SDI logo generator
VIO DLG
41
VIO ALC
HD/SD digital automatic loudness controller
The VIO ALC is a new product for HD/SD-SDI embedded audio amplitude control. The VIO ALC adopts advanced automatic amplitude
processing and advanced technology for reducing and eliminating audio noise. It automatically keeps valid audio data within a required
range. The VIO ALC is useful for dealing with amplitude problems in various occasions such as audio jumping between different
programs.
Key Features
··Advanced FPGA + DSP processing technology
·· Based on ITU-R BS1770 standard
·· Support the resolut ion of 480i 60, 576i 50, 720P,1080i and 1080P
·· Support SDI signal with embedded audio
·· Up to 8 channels of audio processing with embedded audio
·· Support signal loop-out when power off
·· Unique technology of noise reduct ion. Loudness control only to valid data
·· Two control modes, auto mode for automat ic control of audio loudness, manual mode for customize adjustment of audio gain
·· Support SNMP protocol and Web server monitor
·· Monitor audio waveform and phase before and after processing from DVI interface
··Adopt RS485 to connect VIO ALC and RCP with a coaxial cable
·· Two high quality of speakers and head phone conf igured on RCP, adjustable audio volume via knobs
·· 1U chassis structure, redundant power and fan designed
VIO
Application
HD/SD digital automatic loudness controller
VIO ALC and VIO RCP-A front and back
VIO ALC host
front and back
42
VIO ALC
VIO RCP-A remote control pannel
front and back
Waveform monitoring and Web monitoring
VIO ALC-HD
Professional audio waveform and phase display before
and after loudness control from DVI output
Web server monitoring the status of video and
audio signal, the audio PPM before and after
loudness control
Technical Specification
Parameter range
0~30dB adjustable
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Standard
SMPTE 259M
270Mbit/s
Control Interface
RS-485, BNC, No parity
Bit Baud rate based on protocol
RJ45, 1000MBase T Ethernet
VIO RCP-A
Audio input
Inpu
2x analog audio stereo
(One for AUX audio in)
Interface 3pin, balanced
Parameter range
The range of loudness control0~30dB
adjustable
Control Interface
RCP controlRS-485, BNC,no parity
bit, Baud rate based on protocol
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
VIO
VIO ALC-SD
Signal Input
Input
1xSD-SDI, BNC, 75ohm
Standard SMPTE 259M 270Mbit/s
Length 300m with Belden 1694A
Signal Output
Output Interface
3xSD-SDI, BNC, 75ohm
(2 after-loudness-control outputs1 of 2 for
loop-out without power, 1 HD/SD-SDI loop)
HD/SD digital automatic loudness controller
VIO ALC-HD
Signal Input
Input
1xHD/SD-SDI, BNC, 75ohm
Standard SMPTE 292M 1.5Gbit/s
SMPTE 259M 270Mbit/s
Length 100m @ 1.5Gb/s
300m @ 270Mb/s with
Belden 1694A
Signal Output
Output Interface
3xHD/SD-SDI,
BNC, 75ohm
(2 after-loudness-control outputs,which
one for loop-out without power,
1 HD/SD-SDI loop)
Standard SMPTE 292M1.5Gbit/s
SMPTE 259M 270Mbit/s
Control Interface
RS-485, BNC, No parity
Bit Baud rate based on protocol
RJ45, 1000MBase T Ethernet
Parameter range
0~30dB adjustable
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Order Information
VIO ALC-SD
VIO ALC-HD
VIO RCP-A
VIO AM-SD
VIO AM-HD
SD digital audio loudness controller
HD/SD digital audio loudness controller
VIO ALC/DAP universal remote panel, with speakers
Analog/AES/SD embedded digital audio monitor
Analog/AES/HD/SD embedded digital audio monitor
VIO ALC
43
VIO AM
Audio monitor
The VIO AM can monitor SDI embedded audio, analog audio stereo signal, and AES signal at the same time with two independent highquality speakers. The speakers can be configured to monitor any input audio source. The VIO AM is an ideal solution for in-studio audio
monitoring.
Key Features
··Monitor various kinds of audio signals: analog audio, AES, and SDI embedded audio
··Support up to 16 channels for SDI embedded audio, one analog audio stereo signal, and 2 AES
·· Two high quality of speakers and head phone on the front panel, adjustable audio volume and L/R balance via knobs
··Set the audio source to monitor manually though buttons on the front panel
··Display audio PPM directly on the front panel
··Real time EDH detection and alarm indicated by LED indicator
··Based on 1U chassis structure, redundant power and fan designed
VIO
Application
Anudio monitor
The speakers can be configured to monitor the identical audio channel or the audio channelsfromcompletely different audio source. For
example, one speaker is set to monitor one channel of AES;meanwhile another is set to monitor one channel of Analog audio.
Application
44
VIO AM
Technical Specification
VIO AM-HD
Video Signal Input
Input
1xHD/SD-SDI, BNC, 75ohm
Standard SMPTE 292M 1.5Gbit/s
SMPTE 259M 270Mbit/s
Embedded audio Up to 16 channels
Return Loss >15dB Video Signal Output
Video Signal Output
Outpu 3xHD/SD-SDI, BNC, 75ohm
(2 HD/SD-SDI outputs1 of 2 for loop-out without power,
1 HD/SD-SDI loop)
Standard SMPTE 292M 1.5Gbit/s
SMPTE 259M 270Mbit/s
VIO AM-SD
Video Signal Input
Input
1xSD-SDI, BNC, 75ohm
Standard
SMPTE 259M 270Mbit/s
Embedded audio: Up to 16 channels Video
Signal Output
Output Interface 3xSD-SDI, BNC, 75ohm
(2SD-SDIoutputs1of 2for loop-out without power,
1 SD-SDI loop)
Standard SMPTE 259M270Mbit/s
Digital Audio Signal Input
Interface 2xAES, BNC, unbalanced
Digital Audio Signal Input
Interface 2xAES, BNC, unbalanced
Analog Audio Signal Input
interface 1xaudio stereo, 3pin, balanced
Analog Audio Signal Input
Interface 1xaudio stereo, 3pin, balanced
Max level +24dBu
Max level
+24dBu
VIO
Physical Power Supply 2x120W
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Order Information
Audio monitor
VIO ALC-SD
VIO ALC-HD
VIO RCP-A
VIO AM-SD
VIO AM-HD
SD digital audio loudness controller
HD/SD digital audio loudness controller
VIO ALC/DAP universal remote panel, with speakers
Analog/AES/SD embedded digital audio monitor
Analog/AES/HD/SD embedded digital audio monitor
VIO AM
45
VIO Delay
HD/SD-SDI solid delay line
VIO Delay series is an ideal product for high resolut ion of SDI signal delay. It can delay 1 digital serial signal (support SDI with The VIO
Delay Series is an ideal product for high-resolution SDI signal delay. It can delay 1 digital serial signal (supports SDI with embedded
audio) with advanced technology that allows delay time to be adjusted frame by frame. The max delay time is up to ten minutes for SDSDI, two minutes for HD-SDI. Convenient function buttons and LCD display on front panel
Key Features
··The max delay time is up to ten minutes for SD-SDI, two minutes for HD-SDI
··Advanced FPGA + DSP processing technology
··Accurately adjust delay time frame by frame
·· Support H/V phase adjustment
·· Support monitor the signal before delay
··AUX video input or audio mute to avoid abnormal video signal output
·· Provide the quick switch between bypass and delay signal
·· 4xAES Input and output optional
·· Program loop-out when power off
·· 1U chassis structure, redundant power supplies
·· support SNMP
·· Supply RCP
Work theory of Mute advance and Aux advance
VIO Delay supports 1 AUX SDI signal input, and provides the
I
quick switch among bypass, delay and AUX signal. When
VIO
muting the delayed signal or replacing the abnormal signal
with the AUX signal, according the reaction time, the
operator can set Mute advance or Aux advance to reduce the
Regular PGM signal is delayed in storage area.
HD/SD-SDI solid delay line
46
loss of regular signal.
2
3
Use AUX signal to replace the abnormal PGM signal
Use AUX signal to replace the abnormal PGM signal with
without AUX advance. The abnormal signal will flow
AUX advance. Set the AUX advance to offset the
into storage area during the operator’s reaction time.
operator’s reaction time.
VIO DELAY
Host and remote control pannel
The front panel and back rear of VIO Delay
The front panel and back rear of VIO Delay-RCP
VIO Delay-HD
Signal Input
PGM xHD-SDI, BNC, 75ohm
AUX I
1xHD-SDI, BNC, 75ohm
Standard SMPTE 292M 1.5Gbit/s
VIO Delay-SD
Signal Input
PGM 1xSD-SDI, BNC, 75ohm
AUX 1xSD-SDI, BNC, 75ohm
Standard SMPTE 259M270Mbit/s
BB Input
Ref In
1*CVBS, BNC, 75ohm
BB Input
Ref In
1*CVBS, BNC, 75ohm
Signal Output
Interface 3xHD/SD-SDI, BNC, 75ohm
(2 after-delay outputs 1 of 2 for loop-out
without power, 1 before-delay output)
Standard SMPTE 292M 1.5Gbit/s
SMPTE 259M 270Mit/s
Signal Output
Interface
3xSD-SDI, BNC, 75ohm
(2 after-delay outputs1 of 2 for loop-out
without power, 1 before-delay output)
Standard
SMPTE 259M 270Mbit/s
Physical
Power Supply: 2x120W
Size
440mm×320mm×44mm
Control Interface
RS-232 26 pin female "D"
Network portRJ45, 1000MBase T Ethernet
HD/SD-SDI delay line
Control Interface
RS-232 26 pin female "D"
Network RJ45, 1000MBase T Ethernet
VIO
Technical Specification
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Order Information
VIO Delay-SD90S VIO Delay-SD180S VIO Delay-SD300S VIO Delay-SD600S VIO Delay-HD60S VIO Delay-HD120S SD-SDI Solid Delayer, max delay t ime is 90s.
SD-SDI Solid Delayer, max delay t ime is 180s.
SD-SDI Solid Delayer, max delay t ime is 300s.
SD-SDI Solid Delayer, max delay t ime is 600s.
HD-SDI Solid Delayer, max delay t ime is 60s.
HD-SDI Solid Delayer, max delay t ime is 120s
VIO DELAY
47
VIO TSG-AS
Analog Sync Signal Generator for PAL/NTSC Video
VIO DCO is an SDI auto change over which can monitor 2channels SD SDI input signals (Main/Backup), and switches automatically The
VIO TSG-AS is a high-performance, reliable BB generator designed for broadcasting by Gefei-Tech. It supports 12 output interfaces, an
independent host and slave, and 2 loop out interfaces. It comes with external phase lock, H/V adjustment, and P/N system selection.
With internal WebServer, users can control various video/audio signal settings through a network interface and upload 3 static images
as needed. The VIO TSG-AS runs on dual-redundant power and a full modularization structure.
Key Features
··Standard 1U chassis
··Supports external phase lock, H/V adjustment, and P/N system selection of BB output
··Internal WebServer - users can control various A/V signal functions over a network
··12 output channels of independent BB output in high quality
··Dual-redundant power and full modularization structure
VIO
Block Diagram
Technical Specification
Input
Sync. Input: 1xREF
Input connector: BNC
Amplitude:
±6dB. 0.5 2.0Vp-p
SCH phase: ±40°
SNR:
40dB
Return loss: 40dB (within 5MHz)
Format:
NTSC/PAL
Return loss:
30dB (within 5MHz)
Precision of color burst: ±5%
Precision of sync: ±3%
Blanking level:
±50mV
SCH phase:
±5°
Timing adjustment: full color frame
Output
BB output:
12xBB, 1xLoop
Input connector: BNC
Control mode
Interface: RJ4510/100/1000M Ethernet
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Order Information
VIO TSG-AS VIO TSG-BS 48
VIO TSG-AS
Analog Sync signal generator for PAL/NTSC video, 12 BB outputs
Dual auto switchable analog sync signal generator for PAL/NTSC video, 12 BB outputs
VIO TSG-BS
Dual Auto-Switchable Analog Sync Signal Generator
The VIO TSG-BS supplies a slave BB generate module to recognize the changeover between the host and the slave, guaranteeing the
safety and stability of the whole operation system. It supports 12 outputs, an independent host and slave, and 2 loop out interfaces.
Users can control it manually or automatically. The VIO TSG-BS comes with features such as external phase lock, H/V adjustment, and
P/N system selection.
With internal WebServer. users can control various video/audio signal settings through a network interface and upload 3 static images
as needed. The VIO TSG-BS runs on dual-redundant power and a full modularization structure.
Key Features
··Standard 1U chassis
··Change over between host BB generator and slave
··Supports external phase lock, H/V adjustment, and P/N system selection of BB output
··Internal WebServer - users can control various A/V signal functions over a network
··12 output channels of independent BB output in high quality
··Dual-redundant power and full modularization structure
VIO
Block Diagram
Technical Specification
Input
Sync. Input: 2xREF
Input connector: BNC
Amplitude:
±6dB. 0.5 2.0Vp-p
SCH phase: ±40°
SNR:
40dB
Return loss: 40dB (within 5MHz)
Format:
NTSC/PAL
Return loss:
30dB (within 5MHz)
Precision of color burst: ±5%
Precision of sync: ±3%
Blanking level:
±50mV
SCH phase:
±5°
Timing adjustment: full color frame
Output
BB output:
12xBB, 1xLoop
Input connector: BNC
Control mode
Interface: RJ45 10/100/1000M Ethernet
Power
2*120W 100 ~ 256 VAC 50-60Hz
Dimension
440mm×483mm×45mm
Order Information
VIO TSG-AS VIO TSG-BS Analog Sync signal generator for PAL/NTSC video, 12 BB outputs
Dual auto switchable analog sync signal generator for PAL/NTSC video, 12 BB outputs
VIO TSG-BS 49
VIO MFC
Multi-format converter
VIO MFC series are format converter based on 1RU chassis, including VIO MFC HDMI-HD, VIO MFC HDMI-SD, VIO MFC UDC, and
VIO MFC-X. It’s a bridge between broadcasting and IT area. Support LCD menu, control button, and LED indication on front panel.
CVBS output and audio input/output are optional.
Key Features
Support various formats for VGA and DVI (HDMI) input. Up to 1920x1080 for DVI (HDMI) input and 1600x1200 forVGA input.
Besides inner sync, genlock with full phasing control for V-phase and H-phase locks HD/SD-SDI output to blackburst.
For up/down conversion, adopt AFD auto-sensing or manual setting (Crop/Bar/Stretch).
Magnify the selected image area though the Web server. Support moving and adjusting the magnify area pixel bypixel.
Provide flexible adjustment for luminance, saturation, contrast, detail, noise reduction
Multi-level anti-flicker
Preset layouts for all parameter settings
VIO
Application
multi-format converter
Order Information
VIO MFC HDMI-HD
VIO MFC HDMI-SD
VIO MFC UDC VIO MFC-X
50
VIO MFC
Convert DVI (HDMI) and VGA signal to HD/SD-SDI with genlock
Convert DVI (HDMI) and VGA signal to SD-SDI with genlock
Up/down cross conversion with genlock
Universal format converter, convert DVI (HDMI), VGA, HD/SD-SDI CVBS signal to each other with genlock
Web control UI
Technical Specification
Input:
Analog video output interface(Optional)
VGA input number: 1
Number :4xCVBS BNC 75ohm
Connector: DB15 Female
Resoulation:
640x480/60/75 800x600/60/75
1024x768/60/75
1152x864/60/75 1280x768/60
Audio input&output interface(Optional)
Digital input number: 2
1280x800/60 1280x960/60 1280x1024/60 1360x768/60
connector: BNC 75ohm unbanlance
1440x900/60 1600x900/60
Format:
1600x1200/60
VIO
VIO MFC HDMI-HD
DVI/HDMI/VGA to HD/SD-SDI converter
with genlock
AES-3 SMTPE 276M
Analog input number : 2
DVI/HDMI input number : 1
Connector:
Connector : DB24 female
Digital output number: 2
Resoulation: 720p 50/59.94/60 1080i 50/59.94/60;
Connector: BNC 75ohm unbanlance
1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60;
Format :
800x600x60 1024x768x60 1280x720x50/60
Analog output number :2
1280x768x60 1280x800x601 280x960x60
Connector:
1280x1024x601366x768x601920x1080x60/50
Genlock:
Output:
1*BNC
3-pin
600ohm Balance
AES-3 SMTPE 276M
3-pin 600ohm Balance
SMPTE 259M-C 270Mb/s
Connector: BNC 75ohm
Control Interface
Format: SMPTE 292M, 1.485Gb/s
1x RJ45 10/100/1000M auto-adapting
SMPTE 259M-C 270Mb/s
Multi-format converter
HD/SD-SDI output number: 2
625i 50, 525i 59.94,
Power
625i 50, 525i 59.94,
2*120W 100 ~ 256 VAC 50-60Hz
720p 50/59.94/60
Dimension
1080i 50/59.94/60
440mm×483mm×45mm
1080p 25/30
Return loss:
﹥15dB
Signal Level: 800mV±10%
Overshoot:
﹤80mV
Jitter:
﹤0.2UI
Rise and fall time: ﹤500ps
DC offset :
0V±500mV
VIO MFC
51
Technical Specification
VIO MFC HDMI-SD
DVI/HDMI/VGA to SD-SDI converter
with genlock
Input:
DC offset :
VGA input number: 1
Analog video output interface(Optional)
Connector: DB15 Female
Number :4xCVBS BNC 75ohm
Resoulation:
0V±500mV
640x480/60/75 800x600/60/75
1024x768/60/75
1152x864/60/75 1280x768/60
Audio input&output interface(Optional)
1280x800/60 1280x960/60 1280x1024/60 1360x768/60
Digital input number: 2
1440x900/60 1600x900/60
connector: BNC 75ohm unbanlance
1600x1200/60
Format:
AES-3 SMTPE 276M
DVI/HDMI input number : 1
Analog input numberL : 2
Connector : DB24 female
Connector:
3-pin
600ohm Balance
Resoulation: 720p 50/59.94/60 1080i 50/59.94/60;
1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60;
Digital output number: 2
800x600x60 1024x768x60 1280x720x50/60
Connector: BNC 75ohm unbanlance
1280x768x60 1280x800x601 280x960x60
Format :
1280x1024x601366x768x601920x1080x60/50
Analog outputt numberL :2
Output:
Connector:
SD-SDI output number: 2
Genlock:
Connector: BNC 75ohm
1xBB In, BNC
Format:
SMPTE 259M-C 270Mb/s
SMPTE 259M-C 270Mb/s
AES-3 SMTPE 276M
3-pin 600ohm Balance
625i 50, 525i 59.94,
625i 50, 525i 59.94,
Return loss:
﹥15dB
Control Interface
Signal Level: 800mV±10%
1x RJ45 10/100/1000M auto-adapting
Overshoot:
﹤80mV
Power
Jitter:
﹤0.2UI
2*120W 100 ~ 256 VAC 50-60Hz
Rise and fall time: ﹤500ps
Dimension
VIO
440mm×483mm×45mm
VIO MFC HDMI-UDC
Up/down cross converter with genlock
Input:
DC offset :
SD/HD input number : 1
Analog video output interface(Optional)
Connector: BNC 75ohm
Number :4xCVBS BNC 75ohm
0V±500mV
Format: SMPTE 259M-C 270Mb/s
SMPTE-292M 1.485Gps
Audio input&output interface(Optional)
SMPTE-425 2.970Gps
Digital input number: 2
multi-format converter
SD: 625i/50; 525i/60 HD: 720p 50/59.94/60
connector: BNC 75ohm unbanlance
1080i 50/59.94/60; 1080p 30/29.97/25/24/23.98;
Format:
1080p 50/59.94/60;
Analog input numberL : 2
Analog video input number:1
Connector:
AES-3 SMTPE 276M
3-pin
600ohm Balance
Connector: BNC 75ohm
Format: SMPTE 259M-C 270Mb/s 625i/50;
Digital output number: 2
Connector: BNC 75ohm unbanlance
Output:
Format :
HD/SD-SDI output number: 2
Analog output numberL :2
Connector: BNC 75ohm
Connector:
Format: SMPTE 292M, 1.485Gb/s
Level: +24dBu (0dbFS)
AES-3 SMTPE 276M
3-pin 600ohm Balance
SMPTE 259M-C 270Mb/s
625i 50, 525i 59.94,
Genlock:
720p 50/59.94/60
1xBB In, BNC
1080i 50/59.94/60
SMPTE 259M-C 270Mb/s 625i/50;
1080p 25/30
Control Interface
Return loss:
﹥15dB
Power
Overshoot:
﹤80mV
2*120W 100 ~ 256 VAC 50-60Hz
Jitter:
﹤0.2UI
Dimension
Rise and fall time: ﹤500ps
52
VIO MFC
1x RJ45 10/100/1000M auto-adapting
Signal Level: 800mV±10%
440mm×483mm×45mm
Technical Specification
Input:
Overshoot:
﹤80mV
VGA input number: 1
Jitter:
﹤0.2UI
Connector: DB15 Female
Rise and fall time: ﹤500ps
Resoulation:
DC offset :
640x480/60/75 800x600/60/75
1024x768/60/75
1152x864/60/75 1280x768/60
0V±500mV
VGA output number: 1
1280x800/60 1280x960/60 1280x1024/60 1360x768/60
Connector: DB15 Female
1440x900/60 1600x900/60
Resoulation: 800x600/60p 1024x768/60p 1280x800/60p
1600x1200/60
DVI/HDMI input number : 1
1280x960/60p 1280x1024/60p 1360x768/60p
Connector : DB24 female
DVI/HDMI output number : 1
Resoulation: 720p 50/59.94/60 1080i 50/59.94/60;
Connector : DB24 female
1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60;
Resoulation: 720x576/60p 800x600/60p 1024x768/60p
800x600x60 1024x768x60 1280x720x50/60
1280x720/60p 1280x768/60p 1280x1024/60p
1280x768x60 1280x800x601 280x960x60
1360x768/60p 1400x1050/60p 1600x1200/60p
1280x1024x601366x768x601920x1080x60/50
1920x1080/50p 1920x1080/60p
SD/HD input number : 1
nalog video output interface(Optional)
Connector: BNC 75ohm
Number :4xCVBS BNC 75ohm
Format:
SMPTE 259M-C 270Mb/s
Audio input&output interface(Optional)
SMPTE-292M 1.485Gps
Digital input number: 2
SMPTE-425 2.970Gps
connector: BNC 75ohm unbanlance
SD: 625i/50; 525i/60 HD: 720p 50/59.94/60
Format:
1080i 50/59.94/60; 1080p 30/29.97/25/24/23.98;
Analog input numberL : 2
1080p 50/59.94/60;
Connector:
Analog video input number:1
Digital input number: 2
Connector: BNC 75ohm
Connector: BNC 75ohm unbanlance
Format: SMPTE 259M-C 270Mb/s 625i/50;
Format :
Output:
Analog input numberL :2
HD/SD-SDI output number: 2
Connector:
Connector: BNC 75ohm
Genlock:
Format: SMPTE 292M, 1.485Gb/s
1xBB In, BNC
SMPTE 259M-C 270Mb/s
AES-3 SMTPE 276M
3-pin
600ohm Balance
AES-3 SMTPE 276M
3-pin 600ohm Balance
SMPTE 259M-C 270Mb/s 625i/50;
625i 50, 525i 59.94,
Control Interface
720p 50/59.94/60
1x RJ45 10/100/1000M auto-adapting
1080i 50/59.94/60
Power
1080p 25/30
2*120W 100 ~ 256 VAC 50-60Hz
Return loss:
Dimension
﹥15dB
440mm×483mm×45mm
Audio input&output interface(Optional)
Digital output number: 2
Digital input number: 2
Connector: BNC 75ohm unbanlance
connector: BNC 75ohm unbanlance
Format :
Format:
Level:
AES-3 SMTPE 276M
multi-format converter
Signal Level: 800mV±10%
Level:
VIO
VIO MFC-X
Universal multi-format converter
AES-3 SMTPE 276M
0.2 to 2.0 Vp-p
0.2 to 2.0 Vp-p
Analog output number :2
Analog input number : 2
Connector:
Connector:
Level: +24dBu (0dbFS)
3-pin
600ohm Balance
Level: +24dBu (0dbFS)
3-pin 600ohm Balance
Frequency Response : <±0.04dB @ 20Hz to20KHz
Frequency Response : <±0.04dB @ 20Hz to20KHz
Analog video output interface(Optional)
Differential Gain 0.15%
Number :4xCVBS BNC 75ohm
Differential Phase 0.15 degree
Level1Vpp
Crosstalk -60dB at 5MHz
Return Loss >40dB to 5.75MHz
SNR 75dB to 5.75MHz unweighted
Frequency Response +/-0.1dB, DC to 10MHz
VIO MFC
53
XIO
XIO product list
54
XIO 1UF & XIO 3UF
XIO modular processing platform
XIO 1UF modular platform offers high-density delivery of HD and SD modular solution. The 1U rack unit supports up to 4 modules and
hot swap plug. Single and dual PSU versions are available. It provides inner built Xio-BUS. This platform can be managed by centralized
monitoring and management software system. It also can be monitored and controlled though standard and full SNMP and Ethernet.
XIO 3UF modular platform offers high-density delivery of HD and SD modular solution. The 3U rack unit supports up to 16 modules.
Single and dual PSU versions are available. It provides inner built Xio-BUS. This platform can be managed by centralized monitoring
and management software system. It also can be monitored and controlled though standard SNMP and Ethernet.
Key Features
··Up to 16 single or 8 double width modules for 3RU module platform,
··Up to 4 single or 2 double width modules for 1RU module platform
··Support various signal types, such as 3G-SDI, HD-SDI, SD-SDI, ASI, Analog video signal and Analog audio signal
··Provide various kinds of signal processing, such as DA processing, embedding and de-embedding, up and down conversion, D/A and
A/D, frame sync processing and so on
··Support global BB
··Inner XIO data bus
··Support hot swap plug
··Support RS232/RS422 control
··Redurant power supply
··Managed by centralized monitoring and management software system
··Support standard SNMP
XIO
Technical Specification
3U modular platform
Up to 16 single or 8 double width modules
Size 100 mm width 365 mm length
Power
Input 90-264V, 47~63Hz
Inrush current: 50 A (Max)
Power consumption Max 250w (Full load)
Power
Input 90-264V, 47~63Hz
Inrush current: 50 A (Max)
Power consumption Max 250w (Full load)
Temperature
Operation temperature 0-40
Store temperature -30-+75
Temperature
Operation temperature 0-40
Store temperature -30-+75
XIO modular processing platform
1U modular platform
Up to 4 single or 2 double width modules
Size 100 mm width 365 mm length
Order Information
XIO 1UF
XIO 3UF
XIO PSU
XIO 1RU modular platform with 4 slots and signal PSU,redurant power supply optiaonal
XIO 3RU modular platform with 16 slots and signal PSU,redurant power supply optiaonal
Power supply moduler for XIO chassis
XIO 1UF & XIO 3UF
55
XIO NET
XIO platform management and network interface
XIO NET is high-quality interface which provides an individual Ref interface used as global clock to sync all the other modules inside
the XIO platform. There are hot-restart button and reset button to deal with abnormal emergency situation. It adopts LED display
module to show the IP address of XIO NET.
XIO NET provides a RJ45 interface, via which we can configure and manage the status of the modules . It also can be monitored and
controlled though standard and full SNMP.
Key Features
XIO
··Provide a RJ45 interface, 10/100/1000M auto-sensing
··Read and monitor the status of the module inside the XIO platform via Ethernet
··Manage and configure the parameters of the modules inside the XIO platform via Ethernet
··Supports standard and full SNMP
··Provide an individual Ref interface used as global clock to sync all the other modules inside the XIO platform
··Detect the slot position of module automatically
··Support hot plug swag
··Adopt emergency measures with hot-restart button and reset button
Web configure interface
Technical Specification
XIO platform management and network interface
Ref In
Input type
Input interface
Standard
Impedance
Ref loop
Output type
Output interface
Standard
Impedance
Ethernet
Interface
Network Type
Analog composite video
1*Ref, BNC
PAL/NTSC
75 ohms
RS232
Interface
Type
1*DB15
15-pin D type
Analog composite video
1*Ref loop, BNC
PAL/NTSC
75 ohms
1*RJ45
10/100/1000M auto-adapting
1U interface
Order Information
XIO NET
56
XIO NET
XIO platform management and network interface
3U interface
XIO 9000ADA
Analog audio signal distribution amplifier
The XIO 9000ADA is a high-quality distribution amplifier which can distribute one analog audio signal to seven outputs. The interface for
output and input is a 3-pin balanced interface. It comes with a wide range of signal gain which can be controlled from the card edge. It
adopts an independent output driver with a good output isolation and crosstalk suppression.
The XIO 9000ADA provides automatic signal equalization, which can significantly improve signal quality and reduce signal loss caused
by transmission of the input source over long distances. The LED lights on the module indicate input signal and power supply status. It
supports SNMP. It can be managed and monitored in real-time by XIO NET, the Network Management Module, via Ethernet.
Key Features
··Support SNMP, and can be real-time managed and
monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other
professional fields
XIO
··One analog audio signal input, seven analog audio signals output
··Adopt 3-pin interface for input and output
··Support hot swap plug
··Adjustable signal gain from -6dB to +27dB
··Provide automatic signal equalization for long cable applications
··Provide LED lights to indicate the status of signals and power supply
3U interface
1U interface
Technical Specification
Analog audio signal distribution amplifier
Analog audio input
Input number
1
Interface
3-pin (Balanced)
Impedance
600 ohms
Frequency response: <±0.05dB 20Hz20KHz
Analog video Output
Output number
7
Interface
3-pin (Balanced)
Gain range
-6dB to +27dB
Impedance
600 ohms
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9000ADA
XIO 9001ADA
XIO 9000VDA
XIO 9001VDA
1in 7 out analog audio distribution amplifier
2in 3 out analog audio distribution amplifier
1in 7 out analog composite video distribution amplifier
2in 3 out analog composite video distribution amplifier
XIO 9000ADA
57
XIO 9000VDA
Analog composite video signal distribution amplifier
The XIO 9001VDA is a high-quality distribution amplifier designed to distribute dual analog composite video signals to 2x3 outputs. The
unit supports automatic input detection of NTSC and PAL. Output signal gain can be adjusted with a DIP Switch.
The XIO 9001VSD provides automatic signal equalization for up to 200m (Belden 1694A) which can improve signal quality and reduce
signal loss caused by transmission of the input source over long distances. The LED lights on the module indicate the status of input
signal and power supply. It supports SNMP along with real-time management and monitoring by XIO NET, the Network Management
Module, via Ethernet.
Key Features
XIO
··One analog composite video signal input, seven analog composite video signals output
··Support automatic input detection of NTSC and PAL standard
··Support hot swap plug
··Adjust the gain of output signal via DIP Switcher.
··Provides signal equalization adjustment for up to 200m (Belden 8281)
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
3U interface
1U interface
Technical Specification
Analog composite video signal distribution amplifier
Analog Video Input
Input interface
1*CVBS BNC
Impedance
75 ohms
Format: SMPTE 259M-C 270Mb/s
Format
Length
≤200 (Belden 8281)
Analog Video Output
Output interface
7*CVBS, BNC
Impedance
75 ohms
625i/50; 525i60
Signal amplitude 1Vpp
White level
0.7V
H-sync level
-0.3V
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9000VDA
XIO 9001VDA
XIO 9000VSD-RC
XIO 9001VSD-RC
XIO 9000VSD-HD
58
XIO 9000VDA
1in 7 out analog composite video distribution amplifier
2in 3 out analog composite video distribution amplifier
1in 7 out SDI/ASI signal distribution amplifier with RC
2in 3 out SDI/ASI signal distribution amplifier with RC
1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC
XIO 9000VSD-RC
SD-SDI/ASI signal distribution amplifier with RC
The XIO 9000VSD-RC is a high-quality distribution amplifier which can distribute one SD-SDI signal to seven outputs with reclocking.
The device supports SD-SDI input signal with embedded audio and automatic input detection of 525i 60 and 625i 50. It also supports
ASI signals to be processed and distributed.
The XIO 9000VSD-RC provides automatic signal equalization and reclocking for long cable applications, which can improve signal
quality and reduce signal loss caused by transmission of input sources over long distances. The LED lights on the module indicate the
status of the input signal and power supply. It supports SNMP and comes with real-time management and monitoring by XIO NET, the
Network Management Module, via Ethernet.
Key Features
··Provide LED lights to indicate the status of signals and power
supply
··Support SNMP, and can be real-time managed and monitored
by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other
professional fields
XIO
··One SD-SDI signal input, seven SD-SDI signal outputs with RC
··Support automatic input detection of 525i 60 and 625i 50
··Support SD-SDI signal with embedded audio
··Support ASI signal to be processed and distributed
··Support hot swap plug
··Broadcast quality with inner 10 bit processing
··Provide automatic signal equalization and reclocking for long
cable applications
1U interface
3U interface
Digital Input
Input interface
1*SD-SDI/ASI BNC
Impedance
75 ohms
Format
525i60, 625i50
SMPTE 259M-C 270Mb/s
Reflection loss
﹥15dB, 270MHz
Max length<200m (Belden 1694A)
Order Information
XIO 9000VSD-RC
XIO 9001VSD-RC
XIO 9000VSD-HD
SD-SDI/ASI signal distribution amplifier with RC
Technical Specification
Digital Output
Output interface
7* SD-SDI/ASI BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI to100KHz
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
1in 7 out SDI/ASI signal distribution amplifier with RC
2in 3 out SDI/ASI signal distribution amplifier with RC
1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC
XIO 9000VSD-RC
59
XIO 9000VSD-HD
HD/SD-SDI/ASI signal distribution amplifier with RC
Based on brand-new XIO platform, XIO 9000VSD-HD is a high-quality distribution amplifier which can distribute one HD/SD-SDI signal
to seven outputs with reclocking. And the device supports HD/SD-SDI input signal with embedded audio and automatic input detection
of 525i 60, 625i 50, 720p, 1080i, 1080p, and 1080psf format. It also supports ASI signal to be processed and distributed.
XIO 9000VSD-HD provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed
and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
··Provide automatic signal equalization and reclocking
for long cable applications
··Provide LED lights to indicate the status of signals and
power supply
··Support SNMP, and can be real-time managed and
monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other
professional fields
XIO
··One HD/SD-SDI signal input, seven HD/SD-SDI signal outputs with RC
··Support automatic input detection of 525i 60, 625i 50, 720p, 1080i,
1080p, and 1080psf format
··Support HD/SD-SDI signal with embedded audio
··Support ASI signal to be processed and distributed
··Support hot swap plug
··Broadcast quality with inner 10 bit processing
3U interface
1U interface
Technical Specification
HD/SD-SDI/ASI signal distribution amplifier with RCz
Digital Input
Input interface
Impedance
Format
Max length
1*HD/SD-SDI/ASI BNC
75 ohms
525i60, 625i50
720p60/59.94/50/30/29.97/25/24/23.98
1080i60/59.94/50 1080p30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
SD-SDI: <200m (Belden 1694A)
HD-SDI: <100m (Belden 1694A)
Order Information
XIO 9000VSD-RC
XIO 9001VSD-RC
XIO 9000VSD-HD
60
XIO 9000VSD-HD
Digital Output
Output interface
7* HD/SD-SDI/ASI BNC
Impedance
75 ohms
Format
SMPTE 259M-C 270Mb/s
SMPTE 292M 1.5Gbit/s
Level
800mV±5%
Jitter<0.2UI 100KHz
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption2-3W
1in 7 out SDI/ASI signal distribution amplifier with RC
2in 3 out SDI/ASI signal distribution amplifier with RC
1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC
XIO 9001VSD-RC
Dual SD-SDI/ASI signals distribution amplifier with RC
Based on brand-new XIO platform, XIO 9001VSD-RC is a high-quality distribution amplifier which provides dual SD-SDI signals for
input, and distributes each of them to three outputs with reclocking. And the device supports SD-SDI input signal with embedded audio
and automatic input detection of 525i 60, and 625i 50. It also supports ASI signal to be processed and distributed.
XIO 9001VSD-RC provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed
and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
··Broadcast quality with inner 10 bit processing
··Provide automatic signal equalization and reclocking for long cable
applications
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored
XIO
··2ch SD-SDI signals input, 3ch SD-SDI signal distributed
outputs with RC
··Support automatic input detection of 525i 60 and 625i 50
··Support SD-SDI signal with embedded audio
··Support ASI signal to be processed and distributed
··Support hot swap plug
3U interface
1U interface
Digital Input
Input interface
2*SD-SDI/ASI BNC
Impedance
75 ohms
Format
525i60, 625i50
SMPTE 259M-C 270Mb/s
Reflection loss
﹥15dB, 270MHz
Max length<200m (Belden 1694A)
Order Information
XIO 9000VSD-RC
XIO 9001VSD-RC
XIO 9000VSD-HD
Dual SD-SDI/ASI signals distribution amplifier with RC
Technical Specification
Digital Output
Output interface
6* SD-SDI/ASI BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI 100KHz
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
1in 7 out SDI/ASI signal distribution amplifier with RC
2in 3 out SDI/ASI signal distribution amplifier with RC
1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC
XIO 9001VSD-RC
61
XIO 9001ADA
Dual analog audio signals distribution amplifier
Based on brand-new XIO platform, XIO 9001ADA is a high-quality distribution amplifier which provides dual analog audio signals for
input, and distributes each of them to three outputs. The interface for output and input is 3-pin balanced interface. A wide range of gain
control is possible and controlled from the card edge. It adopts independent output driver with a good output isolation and crosstalk
suppression.
XIO 9001ADA provides automatic signal equalization, which can improve the signal quality and reduce the signal loss caused by long
distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to
let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network
Management Module, via Ethernet.
Key Features
XIO
··Dual analog audio signals input, and each one distributed to three outputs
··Adopt 3-pin interface for input and output
··Support hot swap plug
··Adjustable signal gain from -6dB to +27dB
··Provide automatic signal equalization for long cable applications
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
3U interface
1U interface
Dual analog audio signals distribution amplifier
Technical Specification
Analog audio input
Input interface
2*analog audio input
Interface
3-pin (Balanced)
Impedance
600 ohms
Frequency response:
<±0.05dB 20Hz 20KHz
Analog video Output
Output interface
6* analog audio output
Interface
3-pin (Balanced)
Gain range
-6dB to +27dB
Impedance
600 ohms
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9000ADA
XIO 9001ADA
XIO 9000VDA
XIO 9001VDA
62
XIO 9001ADA
1in 7 out analog audio distribution amplifier
2in 3 out analog audio distribution amplifier
1in 7 out analog composite video distribution amplifier
2in 3 out analog composite video distribution amplifier
XIO 9001VDA
Dual analog composite video signals DA
Based on brand-new XIO platform, XIO 9001VDA is a high-quality distribution amplifier which provides dual analog composite video
signals for input, and distributes each of them to three outputs. And the device supports automatic input detection of NTSC and PAL.
The gain of output signal can be adjusted via DIP Switcher.
XIO 9001VDA provides signal equalization adjustment for up to 200m (Belden 8281), which can improve the signal quality and reduce
the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal
and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Dual CVBS signals input, and each one distributed to three CVBS signal outputs
··Support automatic input detection of NTSC and PAL standard
··Support hot swap plug
··Adjust the gain of output signal via DIP Switcher.
··Provides signal equalization adjustment for up to 200m (Belden 8281)
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
3U interface
1U interface
Analog Video Input
Input interface
2*CVBS BNC
Impedance
75 ohms
Format
SMPTE 259M-C 270Mb/s 525i60, 625i50
Length
≤200 (Belden 8281)
Analog Video Output
Output interface
6*CVBS, BNC
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Dual analog composite video signals DA
Technical Specification
Impedance
75 ohms
Signal amplitude 1Vpp
White level
0.7V
H-sync level
-0.3V
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9000ADA
XIO 9001ADA
XIO 9000VDA
XIO 9001VDA
1in 7 out analog audio distribution amplifier
2in 3 out analog audio distribution amplifier
1in 7 out analog composite video distribution amplifier
2in 3 out analog composite video distribution amplifier
XIO 9001VDA
63
XIO 9010DEC
Analog video to SD-SDI converter
Based on brand-new XIO platform, XIO 9010DEC is a high-quality A/D converter which converts one analog composite video signal to
four identical SDI signals. It supports NTSC and PAL standard for input signal.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··One analog composite video signal inputs, four identical SDI signals output
··Support NTSC and PAL standard for input signal
··Support hot swap plug
··Broadcasting quality of inner 10 bit processing
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Analog video to SDSDI converter
Analog Video Input
Input interface
1*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Reflection loss
﹥40dB, 5.8MHz
Digital Video Output
Output interface
4*SDI, BNC
Impedance
75 ohms
Format
SMPTE 259M-C 270Mb/s
Level:
800mV±5%
Jitter:
<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9010DEC
XIO 9010DEC-4AUD
XIO 9010DES
XIO 9010DES-4AUD
64
XIO 9010DEC
Analog video to SDSDI converter
Analog video and audio to SDSDI converter
Analog video to SDSDI converter with frame sync.
Analog video and audio to SDSDI converter with frame sync.
XIO 9010DEC-4AUD
Analog video and audio to SD-SDI converter
Based on brand-new XIO platform, XIO 9010DEC-4AUD is a high-quality A/D converter which converts one analog composite video
signal to two identical SDI signals. Meanwhile, two analog audio stereo signals are embedded into each single serial digital signal. The
embedded audio channels can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as
total embedding left or right channel, following input channels and so on. It supports NTSC and PAL standard for input signal.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··One analog composite video signal inputs, four analog audio signals input, and two identical SDI
signals output
··Select the embedded audio channels freely though DIP Switch
··Support NTSC and PAL standard for input signal
··Support hot swap plug
··Broadcasting quality of inner 10 bit processing
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Analog Video Input
Input interface:
1*CVBS, BNC
Impedance:
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Reflection loss:
﹥40dB, 5.8MHz
Analog Audio Input
Input interface:
4*3pin, balance
Impedance:
600 ohms
Max level
+24dBu (0dBFs)
Order Information
XIO 9010DEC
XIO 9010DEC-4AUD
XIO 9010DES
XIO 9010DES-4AUD
Analog video and audio to SDSDI converter
Technical Specification
Digital Video Output
Output interface:
2*SDI, BNC
Impedance:
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level:
800mV±5%
Jitter:
<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Analog video to SDSDI converter
Analog video and audio to SDSDI converter
Analog video to SDSDI converter with frame sync.
Analog video and audio to SDSDI converter with frame sync.
XIO 9010DEC-4AUD
65
XIO 9010DES
Analog video to SDSDI converter with frame sync.
Based on brand-new XIO platform, XIO 9010DES is a high-quality A/D converter which converts one analog composite video signal to
four identical SDI signals with frame sync processing. It supports NTSC and PAL standard for input signal.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet
Key Features
XIO
··One analog composite video signal inputs, four identical SDI signals output
··Provide an individual Ref interface and frame sync processing
··Support NTSC and PAL standard for input signal
··Support hot swap plug
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Broadcasting quality of inner 10 bit processing
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
3U interface
1U interface
Technical Specification
Analog video to SDSDI converter with frame sync.
IAnalog Video Input
Input interface
1*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Reflection loss
﹥40dB, 5.8MHz
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Format
625i 50 SMPTE 259M-C 270Mb/s
Digital Video Output
Output interface
4*SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Order Information
XIO 9010DEC
XIO 9010DEC-4AUD
XIO 9010DES
XIO 9010DES-4AUD
66
XIO 9010DES
Analog video to SDSDI converter
Analog video and audio to SDSDI converter
Analog video to SDSDI converter with frame sync.
Analog video and audio to SDSDI converter with frame sync.
XIO 9010DES-4AUD
Analog video and audio to SDSDI converter with frame sync.
Based on brand-new XIO platform, XIO 9010DES-4AUD is a high-quality A/D converter which converts one analog composite video
signal to two identical SDI signals with frame sync processing. Meanwhile, two analog audio stereo signals are embedded into each
single serial digital signal. The embedded audio channels can be selected freely though DIP Switch. Also embedded mode of audio
channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports NTSC and PAL
standard for input signal.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··One analog composite video signal inputs, four analog audio signals input, and two identical SDI signals output
··Select the embedded audio channels freely though DIP Switch on card edge
··Provide an individual Ref interface and frame sync processing
··Support NTSC and PAL standard for input signal
··Support hot swap plug
··Provide three kinds of sync mode: INT, single EXT, and global EXT come from XIO net
··Broadcasting quality of inner 10 bit processing
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Analog Audio Input
Input interface
4*3pin, balance
Order Information
XIO 9010DEC
XIO 9010DEC-4AUD
XIO 9010DES
XIO 9010DES-4AUD
Impedance
600 ohms
Max level+24dBu (0dBFs)
Digital Video Output
Output interface
2*SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Power
Power consumption: 2-3W
Analog video and audio to SDSDI converter with Frame Sync.
Analog Video Input
Input interface
1*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Reflection loss
﹥40dB, 5.8MHz
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Format
625i 50 SMPTE 259M-C 270Mb/s
Analog video to SDSDI converter
Analog video and audio to SDSDI converter
Analog video to SDSDI converter with frame sync.
Analog video and audio to SDSDI converter with frame sync.
XIO 9010DES-4AUD
67
XIO 9020EMB-4AUD
SDI signal & analog audio embedder with D/A
Based on brand-new XIO platform, XIO 9020EMB-4AUD is a high-quality embedder which embeds two analog audio stereo signals
into a single SDI signal, and outputs two identical serial digital signals with embedded audio. Meanwhile, the SDI signal is converted to
one analog composite video signal for monitoring or other applications. The embedded audio group can be selected freely though DIP
Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels
and so on. It supports 625i 50 and 525i 60 format for input signal.
XIO 9020EMB-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module.
Key Features
XIO
··Support 625i 50 and 525i 60 format for input signal
··Support hot swap plug
··Select the embedded audio channels freely though DIP Switch
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
SDI signal & analog audio embedder with D/A
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length<200M (Belden 1694A)
Analog Audio Input
Input interface
4*3pin, balance
Max level
+24dBu (0dBFs)
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
68
XIO 9020EMB-4AUD
Digital Video Output
Output interface
2*SDI, BNC
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Analog Video Output
Output interface
1*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020EMB-4AUD-FS
SDI signal & analog audio embedder with frame sync.
Based on brand-new XIO platform, XIO 9020EMB-4AUD-FS is a high-quality embedder which embeds two analog audio stereo signals
into a single SDI signal, and outputs two identical serial digital signals with embedded audio and frame sync processing. Meanwhile, the
SDI signal is converted to one analog composite video signal for monitoring or other applications. The embedded audio group can be
selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel,
following input channels and so on. It supports 625i 50 and 525i 60 format for input signal.
XIO 9020EMB-4AUD-FS provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50 and 525i 60 format for input signal
··Support hot swap plug
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Input interface
Max level
4*3pin, balance
+24dBu (0dBFs)
Digital Video Output
Output interface
2*SDI, BNC
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Analog Video Output
Output interface
1*CVBS, BNC 75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SDI signal & analog audio embedder with FS and D/A
Digital Video Input
Input interface
1*SD-SDI, BNC 75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length<200M (Belden 1694A)
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Format
625i 50 SMPTE 259M-C 270Mb/s
Analog Audio Input
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020EMB-4AUD-FS
69
XIO 9020ENC
SDI signal to analog video converter
Based on brand-new XIO platform, XIO 9020ENC is a high-quality converter which converts one SDI signal to four analog composite
video signals, and outputs two SDI signal. It supports 625i 50 and 525i 60 format for input signal.
XIO 9020ENC provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce
the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal
and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by
XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50 and 525i 60 format for input signal
··Support hot swap plug
··provides automatic signal equalization for up to 200M (Belden 1694A)
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
SDI signal to analog video converter
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length<200M (Belden 1694A)
Digital Video Output
Output interface
2*SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Analog Video Output
Output interface
4*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
70
XIO 9020ENC
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020ENC-4AUD
EMBSDI signal to analog video and audio converter
Based on brand-new XIO platform, XIO 9020ENC-4AUD is a high-quality converter which converts one SDI signal to two analog
composite video signals, and outputs one SDI signal. Meanwhile, two analog audio stereo signals are extracted from the SDI signal. The
de-embedded audio group can be selected though DIP Switch. Also the de-embedded mode of audio channels is selectable, such as
following input channels, crossing output, mixing output and so on. It supports 625i 50 and 525i 60 format for input signal.
XIO 9020ENC-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module.
Key Features
··Support SNMP, and can be real-time managed and
monitored by XIO NET
··Widely used in broadcasting system, studios and other
professional fields
XIO
··Support 625i 50 and 525i 60 format for input signal
··Support hot swap plug
··Select de-embedded audio group though DIP Switch
··provides automatic signal equalization for up to 200M (Belden 1694A)
··Provide LED lights to indicate the status of signals and power supply
1U interface
3U interface
Technical Specification
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
Jitter<0.2UI (100 KHz)
Analog Video Output
Output interface
2*CVBS, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Analog Audio Output
Output interface
4*3pin, balance
Impedance
600 ohms
Max level
+24dBu (0dBFs)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SDI signal to analog video and audio converter
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length
<200M (Belden 1694A)
Digital Video Output
Output interface
1*SDI, BNC
Impedance:
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Leve
800mV±5%
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020ENC-4AUD
71
XIO 9020ENS
SDI signal to analog video converter with FS
Based on brand-new XIO platform, XIO 9020ENS is a high-quality converter which converts one SDI signal to four analog composite
video signals, and outputs two SDI signal. Output signals go through frame sync processing. It supports 625i 50 and 525i 60 format for
input signal.
XIO 9020ENS provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce
the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal
and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by
XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50 and 525i 60 format for input signal
··Provide an individual Ref interface and frame sync processing
··Support hot swap plug
··provides automatic signal equalization for up to 200M (Belden 1694A)
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
SDI signal to analog video converter with FS
Digital Video Input
Input interface
1*SD-SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length<200M (Belden 1694A)
Ref In
Input type
Analog composite video
Input interface:
1*Ref, BNC
Standard
PAL/NTSC
Digital Video Output
Output interface
2*SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter
<0.2UI (100 KHz)
Analog Video Output
Output interface
4*CVBS, BNC
Impedance
75 ohms
Standard
PAL/NTSC
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
72
XIO 9020ENS
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020ENS-4AUD
SDI signal to analog video and audio converter with frame sync.
Based on brand-new XIO platform, XIO 9020ENS-4AUD is a high-quality converter which converts one SDI signal to two analog
composite video signals, and outputs one SDI signal. Output signals go through frame sync processing. Meanwhile, two analog audio
stereo signals are extracted from the SDI signal. The de-embedded audio group can be selected though DIP Switch. Also the deembedded mode of audio channels is selectable, such as following input channels, crossing output, mixing output and so on. It supports
625i 50 and 525i 60 format for input signal.
XIO 9020ENS-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and
reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input
signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50 and 525i 60 format for input signal
··Provide an individual Ref interface and frame sync processing
··Support hot swap plug
··Select de-embedded audio group though DIP Switch
··provides automatic signal equalization for up to 200M (Belden 1694A)
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Level
800mV±5%
Jitter:<0.2UI (100 KHz)
Analog Video Output
Output interface
2*CVBS, BNC 75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Analog Audio Output
Output interface
4*3pin, balance
Impedance:
600 ohms
Max level
+24dBu (0dBFs)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SDI sigSDI signal to analog video and audio converter with FS
IDigital Video Input
Input interface
1*SD-SDI, BNC 75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Max length<200M (Belden 1694A)
Ref In
IInput interface:
1*Ref, BNC
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Digital Video Output
Output interface:
1*SDI, BNC
Impedance
75 ohms
Format
525i 60, 625i 50 SMPTE 259M-C 270Mb/s
Order Information
XIO 9020ENC
XIO 9020ENC -4AUD
XIO 9020ENS
XIO 9020ENS -4AUD
XIO 9020EMB -4AUD
XIO 9020 EMB -4AUD-FS
SDI signal to analog video converter
SDI signal to analog video and audio converter
SDI signal to analog video converter with frame sync.
SDI signal to analog video and audio converter with frame sync.
SDI signal & analog audio embedder with D/A
SDI signal & analog audio embedder with FS and D/A
XIO 9020ENS-4AUD
73
XIO 9030HDDEM-4AUD
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs
Based on brand-new XIO platform, XIO 9030HDDEM-4AUD is a high-quality de-embedder which extracts two analog audio stereo
signals from a single HD/SD-SDI signal, and outputs two identical serial digital signals. The de-embedded audio group can be selected
freely though DIP Switch. Also the de-embedded mode of audio channels is selectable, such as following input channels, crossing
output, mixing output and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format.
XIO 9030HDDEM-4AUD provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··Select de-embedded audio group though DIP Switch
··provides automatic signal equalization for up to 100M (Belden 1694A)
··Support hot swap plug
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
HD/SD-SDI signal de-embedder
Digital Video Input
Input interface
1*HD/SD-SDI, BNC 75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Max length<100M (Belden 1694A)
Analog Audio Output
Output interface
4*3pin, balance
Max level
+24dBu (0dBFs)
Digital Video Output
Output interface
2*HD/SD-SDI, BNC
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Order Information
XIO 9030HDDEM-4AUD
XIO 9030HDDEM-2AES
XIO 9030HDDEM-4AUD-FS
XIO 9030HDDEM-2AES-FS
74
XIO 9030HDDEM-4AUD
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync.
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs with frame sync.
XIO 9030HDDEM-4AUD-FS
HD/SD-SDI de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync.
Based on brand-new XIO platform, XIO 9030HDDEM-4AUD-FS is a high-quality de-embedder which extracts two analog audio stereo
signals from a single HD/SD-SDI signal, and outputs two identical serial digital signals. The outputs go through frame sync processing.
The de-embedded audio group can be selected freely though DIP Switch. Also the de-embedded mode of audio channels is selectable,
such as following input channels, crossing output, mixing output and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf
and automatic detection of input format.
XIO 9030HDDEM-4AUD-FS provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Provide an individual Ref interface and frame sync processing
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··Support hot swap plug
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Max leve +24dBu (0dBFs)
Digital Video Output
Output interface
2*HD/SD-SDI, BNC
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
HD/SD-SDI signal de-embedder
IDigital Video Input
Input interface
1*HD/SD-SDI, BNC 75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Max length<100M (Belden 1694A)
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Standard
PAL/NTSC
Analog Audio Output
Output interface
4*3pin, balance
Order Information
XIO 9030HDDEM-4AUD
XIO 9030HDDEM-2AES
XIO 9030HDDEM-4AUD-FS
XIO 9030HDDEM-2AES-FS
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync.
HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs with frame sync.
XIO 9030HDDEM-4AUD-FS
75
XIO 9030HDEMB-4AUD
HD/SD-SDI signal & 4ch analog audio embedder
Based on brand-new XIO platform, XIO 9030HDEMB-4AUD is a high-quality embedder which embeds two analog audio stereo signals
into a single HD/SD-SDI signal, and outputs two identical serial digital signals with embedded audio. The embedded audio group can be
selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel,
following input channels and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format.
XIO 9030HDEMB-4AUD provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··Select embedded audio group though DIP Switch
··provides automatic signal equalization for up to 100M (Belden 1694A)
··Support hot swap plug
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
HD/SD-SDI signal &4ch analog audio embedder
Digital Video Input
Input interface
1*HD/SD-SDI, BNC
Impedance
75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Max length<100M (Belden 1694A)
Analog Audio Intput
Input interface
4*3pin, balance
Max level
+24dBu (0dBFs)
Digital Video Output
Output interface
2*HD/SD-SDI, BNC
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Order Information
XIO 9030HDEMB-4AUD
XIO 9030HDEMB-2AES
XIO 9030HDEMB-4AUD-FS
XIO 9030HDEMB-2AES-FS
76
XIO 9030HDEMB-4AUD
HD/SD-SDI& 4ch analog audio embedder
HD/SD-SDI &2ch AES audioembedder
HD/SD-SDI& 4ch analog audio embedder with frame sync.
HD/SD-SDI &2ch AES audioembedder with frame sync.
XIO 9030HDEMB-4AUD-FS
HD/SD-SDI& 4ch analog audio embedder with frame sync.
Based on brand-new XIO platform, XIO 9030HDEMB-4AUD-FS is a high-quality embedder which embeds two analog audio stereo
signals into a single HD/SD-SDI signal, and outputs two identical serial digital signals with embedded audio and frame sync processing.
The embedded audio group can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as
total embedding left or right channel, following input channels and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and
automatic detection of input format.
XIO 9030HDEMB-4AUD-FS provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality
and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of
input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Provide an individual Ref interface and frame sync processing
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··provides automatic signal equalization for up to 100M (Belden 1694A)
··Support hot swap plug
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
3U interface
1U interface
Technical Specification
Order Information
XIO 9030HDEMB-4AUD
XIO 9030HDEMB-2AES
XIO 9030HDEMB-4AUD-FS
XIO 9030HDEMB-2AES-FS
Analog Audio Intput
Input interface
4*3pin, balance
Max leve +24dBu (0dBFs)
Digital Video Output
Output interface
2*HD/SD-SDI, BNC
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
HD/SD-SDI signal &4ch analog audio embedder with frame sync.
IDigital Video Input
Input interface
1*HD/SD-SDI, BNC
Impedance:
75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Max length<100M (Belden 1694A)
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Standard
PAL/NTSC
HD/SD-SDI& 4ch analog audio embedder
HD/SD-SDI 2ch AES audioembedder
HD/SD-SDI& 4ch analog audio embedder with frame sync.
HD/SD-SDI 2ch AES audioembedder with frame sync.
XIO 9030HDEMB-4AUD-FS
77
XIO 9040UC
SD-SDI to HD-SDI upconverter and DA
Based on brand-new XIO platform, XIO9040UC is a high-quality upconverter which converts one SD-SDI signal to two identical HDSDI signals with frame sync processing. Meanwhile, the module provides a SDI-loop interface for other applications. It supports AFD
and manual ratio adjustment (Bar/stretch/crop). There is advanced de-interlacing technology to generate high-quality HD-SDI signals.
Moreover it supports 625i 50, 525i 60 and automatic detection of input format.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Provide an individual Ref interface and frame sync processing
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Support 625i 50, 525i 60 and automatic detection of input format
··Provide automatic signal equalization
··Support bi-direction PAL to NTSC converter
··Support embedder SDI
··Support AFD and manual adjustment (Bar/stretch/crop)
··Support hot swap plug
··Adjust H-phase and V-phase flexibly
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
SD-SDI to HD-SDI upconverter and DA
Digital Input
Input interface
1*SD-SDI, BNC 75 ohms
Format:
525i60, 625i50, SMPTE 259M-C 270Mb/s
Max length<200m (Belden 1694A)
Ref In
Input type
Analog composite video
Input interface
1*Ref, BNC
Standard
PAL/NTSC
Digital Loop Output
Output interface: 1* SDI Loop, BNC 75 ohms
Format:
SD: 625i50 525i60 SMPTE 259M-C 270Mb/s
Order Information
XIO 9040UC
XIO 9040UC-KF
XIO 9040VSD-HD-DC
XIO 9040XC
XIO 9040XC-4AUD
XIO 9040XC-2AES
78
XIO 9040UC
Level
800mV±5%
Jitter<0.2UI
Output interface
2*HDSDI, BNC
Impedance
75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SD-SDI upconverter and DA
Dual SD-SDI signals upconverter
HD-SDI downconverter and DA
HD/SD-SDI cross converter
HD/SD-SDI cross converter with analog audio output
HD/SD-SDI cross convertor with digital audio output
XIO 9040VSD-HD-DC
SDI distributor and HD to SD downconverter
Based on brand-new XIO platform, XIO9040VSD-HD-DC is a high-quality downconverter which converts one HD-SDI signal to
two identical SD-SDI signals with frame sync processing. Meanwhile, the module provides a HDSDI-loop output interface for other
applications. It supports AFD and manual ratio adjustment (Bar/stretch/crop). There is advanced de-interlacing technology to generate
high-quality SD-SDI signals. Moreover it supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It
supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Provide an individual Ref interface and frame sync processing
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··Provide automatic signal equalization
··Support bi-direction PAL to NTSC converter
··Support AFD and manual adjustment (Bar/stretch/crop)
··Support hot swap plug
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
Order Information
XIO 9040UC
XIO 9040UC-KF
XIO 9040VSD-HD-DC
XIO 9040XC
XIO 9040XC-4AUD
XIO 9040XC-2AES
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI
Digital Loop Output
Output interface
2*SDI, BNC
Impedance
75 ohms
Format:
525i60, 625i50, SMPTE 259M-C 270Mb/s
Level
800mV±5%
Jitter<0.2UI (100 KHz)
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
SDI distributor and HD to SD downconverter
Digital Input
Input interface
1*HD/SD-SDI, BNC 75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Max length<200m (Belden 1694A)
Ref In
Input interface
1*Ref, BNC
Standard
PAL/NTSC
Digital Loop Output
Output interface:
BNC 75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
SD-SDI upconverter and DA
Dual SD-SDI signals upconverter
HD-SDI downconverter and DA
HD/SD-SDI cross converter
HD/SD-SDI cross converter with analog audio output
HD/SD-SDI cross convertor with digital audio output
XIO 9040VSD-HD-DC
79
XIO 9060FS
HD/SD-SDI signal DA and frame sync processor
Based on brand-new XIO platform, XIO 9060FS is a high-quality frame sync processor which inputs one HD/SD-SDI signal and
distributes four HD/SD-SDI signals after frame sync processing and amplification. And the module supports HD/SD-SDI input signal with
or without embedded audio. Moreover it supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format.
XIO 9060FS provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality and
reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input
signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and
monitored by XIO NET, the Network Management Module, via Ethernet.
Key Features
XIO
··Provide an individual Ref interface and frame sync processing
··Provide three kinds of sync mode: INT, single EXT, and Global EXT
··Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format
··Provide automatic signal equalization and relocking
··Support embedded and non-embedded HD/SD-SDI signal
··Support hot swap plug
··Adjust H-phase and V-phase flexibly
··Provide LED lights to indicate the status of signals and power supply
··Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet
··Widely used in broadcasting system, studios and other professional fields
1U interface
3U interface
Technical Specification
HD/SD-SDI signal DA and frame sync processor
Digital Input
Input interface
Impedance
Format:
Max length: Ref In
Input type
Input interface
Standard
1*HD/SD-SDI BNC
75 ohms
SD: 625i50, 525i60
HD: 1080i50/60 720p50/60
1080p24/25/30 1080psf24
SMPTE 259M-C; 270Mb/s
SMPTE 292M; 1.485Gb/s
SD-SDI: <200m (Belden 1694A)
HD-SDI: <100m (Belden 1694A)
Analog composite video
1*Ref, BNC
PAL/NTSC
Digital Output
Output interface
4* HD/SD-SDI BNC
Impedance
75 ohms
Format:
SD: 625i50 525i60 HD: 1080i50/60
720p50/60 1080p24/25/30 1080psf24
SMPTE 259M-C 270Mb/s
SMPTE 292M; 1.485Gb/s
Level
800mV±5%
Jitter<0.2UI 100KHz
Status indicator
Signal status indicator, Power indicator
(Indicate by shining or extinguishing of the green LED)
Order Information
XIO 9060FS
80
XIO 9060FS
HD/SD-SDI signal DA and frame sync processor
XIO 9900MVS-OUT
XIO Series output card of Multi-viewer system
XIO 9900MVS-Out is the output card of multi-viewer system based on XIO series processing platform. It provides four HD/SD-SDI
input signals, and auto detection of input format. One HDMI output signal is achieved with the output resolution up to 1920x1200, which
provides high-definition and fluent image. With build-in Web server, display elements can be configured on the web page via RJ45
interface conveniently and rapidly.
XIO 9900MVS-Out has the advanced function of signal routing. When there are more than two output cards (including two cards) inside
XIO frame, all the HDMI outputs share the whole signal sources, and any signal can be routed to display on any output freely.
Rich features combined with flexible modular XIO processing platform make XIO series multi-viewer system widely used in studio,
broadcasting room, general control centre, production editing studio and other applications where video/audio monitoring and display
are required!
Key Feature
XIO
··Support input format of 525i 59.94, 625i 50, 720p, 1080i, and 1080p, and auto detection of input format
··Support HD/SD-SDI signal with non-embedded or embedded audio signal
··Output one HDMI signal with output resolution up to 1920x1200
··Adopt HDMI interface with fixed socket to avoid the HDMI cable fallen off from the board
··Embed audio into HDMI signal and the audio source can be selected via Web server
··Flexible output options:4:3, 16:9, customized aspect ratio
··Support display of input format and AFD information
··Editable dual program UMD and 4 channel audio meters display
··Signal can be routed to display on any output flexibly and conveniently by configuration on the web server
··Video/audio auto detection and alarming, such as video loss, video frozen, video black, audio silence, audio
overload with high rate of accuracy
··Selectable air timer and countdown timers, analog and digital clocks types
··Support customized layout to preset various layouts for different application, such as studio, OB van, production
room and so on
XIO Series output card of Multi-viewer system
XIO 9900MVS-OUT
81
Product Interface
XIO 9900MVS-Out-1R
(Apply to XIO 1U frame)
XIO
XIO 9900MVS-Out-3R
(Apply to XIO 3U frame)
Product Application
Application 1: when one output card is inserted into XIO frame, it provides Multi-viewer system with 4
images.
XIO Series output card of Multi-viewer system
82
XIO 9900MVS-OUT
Application 2: When there are more than two output cards (including two cards) inside XIO frame, all the
HDMI outputs share the whole signal sources, and any signal can be routed to display on any output freely.
Signal Video Input:
Interface:
HD-SDI input:
Impedance:
HD:
Return Loss:
Signal Level:
Overshoot:
Jitter:
75 ohms
SMPTE 292M;1.485,1.485/1.001Gb/s
SMPTE-425;2.970Gps
720p 50/59.94/60;
1080i 50/59.94/60;
1080p 23.98/24/25/29.97/30
1080p 50/59.94/60;
Return Loss:﹥15dB,5MHz to 1.5GHz
75 ohms
SMPTE295M
576i 50, 480i 59.94
>15 dB to 270 MHz
800mV ±10%
﹤80mV
﹤740ps
Rising and Falling Time:
﹤1500ps
Rising and Falling Time Different: ﹤500ps
DC Level:
0V±500mV
Signal Video Output:
HDMI Output:
Interface:
1*HDMI, type A
Output resolutions:
1024x768, 1280x720, 1280x768
1280x1024, 1360x768, 1400x1050
1600x1200, 1680x1050, 1920x1080, 1920x1200
Frequency: 50/60Hz
Two channel HD/SD-SDI audio signals can be embedded into the
HDMI output signal. The audio channels can be selected on the
Web server to monitor.
Control
Interface:
Type:
10/100/1000M auto-adapting
Support tally via RJ45 interface
XIO Series output card of Multi-viewer system
SD-SDI Input
Impedance:
Signal type:
4*HD/SD, BNC
XIO
Product Application
1*RJ45
Ordering Information
XIO 9900MVS-Out
XIO Series output card of Multi-viewer system-4xHD/SD-SDI signals input, 1x HDMI signal output, and
1xRJ45 for Web control.
XIO 9900MVS-OUT
83
MRS 1616-HS Series
16x16 SD/HD Smart Router Series
The MRS16XX-HS SD/HD SDI series is a compact, high-quality, and low-cost digital video router, suited for small to medium-sized
broadcasting systems, designed by Gefei-Tech. The MRS16XX-HS adopts field blank switching, allowing it to accept external sync. The
main unit is a dual-powered 1U chassis, which can be simultaneously controlled by two separate remote control panels; through RS232
users can control the host with the software on a PC.
MRS
Key Features
··20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting
··Support independent 16 channel bus outputs, and SD/HD inputs auto senescing
··Support external BB using field vanishing switching processing to ensure the switching without flicker and noise
··The host can be configured to support simultaneously controlled by two RCP through RS485
··Convenient to control by software through RS232
··1U chassis, with dual power
Technical Specification
16x16 SD/HD Smart Router series
MRS 1601-HS
Host input interface
Input
16*SD/HD-SDI
Host output interface
Output 1*SD/HD-SDI
Amplitude 800±5%
Jitter<0.2UI
Format 525i30 625i25 720P50
720P60 720P60/M 1080i50
1080i60 1080i60/M 1080sf24
1080sf24/M1080P241080P24/M
1080P25 1080P30
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
84
MRS 1616-HS Series
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 1608-HS
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Host input interface
Input
16*SD/HD-SDI
Host output interface
Output 8*SD/HD-SDI
Amplitude800±5%
Jitter<0.2UI
Format 525i30 625i25 720P50
720P60 720P60/M 1080i50
1080i60 1080i60/M 1080sf24
1080sf24/M 1080P24 1080P24/M
1080P25 1080P30
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Host input interface
Input
16*SD/HD-SDI
Host output interface
Output 16*SD/HD-SDI
Amplitude800±5%
Jitter<0.2UI
Format 525i30 625i25 720P50
720P60 720P60/M 1080i50
1080i60 1080i60/M 1080sf24
1080sf24/M 1080P24 1080P24/M
1080P25 1080P30
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
Power 2X120W
Dimensions
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
16x16 SD/HD Smart Router series
MRS 1616-HS
Host input interface
Input
16*SD/HD-SDI
Host output interface
Output 4*SD/HD-SDI
Amplitude800±5%
Jitter<0.2UI
Format 525i30 625i25 720P50
720P60 720P60/M 1080i50
1080i60 1080i60/M 1080sf24
1080sf24/M 1080P241080P24/M
1080P25 1080P30
BB input
Input
1*BBPAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
MRS
MRS 1604-HS
44 mm x440 mm (19Inch)x320 mm
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 1616-HS Series
85
MRS 1616-S Series
16x16 SD SDI Smart Router Series
MRS1616-S SD SDI series is a kind of digital signal switcher with high quality and low cost, which suits for middle-small sized
broadcasting system, designed by Gefei Tech. The switching system adopts field blank switching, supplies independent external sync.
interface,The separation of the host and remote control panel makes it more convenient to use. The host is 1U chassis, with dual power,
which support simultaneously controlled by two remote control panels; through RS232 user can control the host by professional software
on PC.
MRS
Key Features
··20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting
··Support independent 16 channel bus outputs
··Support external BB using field vanishing switching processing to ensure the switching without flicker and noise
··The host can be configured to support simultaneously controlled by two RCP through RS485
··Convenient to control by software through RS232
··1U chassis, with dual power
Technical Specification
16x16 SD SDI Smart Router series
MRS 1601-S
MRS 1601-S
Host input interface
Input
16*SD-SDI
Format 525i30 625i25 7
Host output interface
Output 1*SD-SDI
Amplitude 800±5%
Jitter<0.2UI
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
86
MRS 1616-S Series
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 1608-S
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Host output interface
Output 4*SD-SDI
Amplitude800±5%
Jitter<0.2UI
BB input
Input
1*BBPAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
Host input interface
Input
16*SD-SDI
Format 525i30 625i25
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Host output interface
Output 8*SD-SDI
Amplitude800±5%
Jitter<0.2UI
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
Host input interface
Input
16*SD-SDI
Format 525i30 625i25
Power 2X120W
Dimensions
44 mm x440 mm (19Inch)x320 mm
Host output interface
Output 16*SD-SDI
Amplitude800±5%
Jitter<0.2UI
BB input
Input
1*BB PAL/NTSC
Host controller interface
Connector
1xRS232 DB9 male
2xRS485 BNC
Remote controller panel interface
Connector 2xRS485 BNC
Power
1X2.5W
16x16 SD SDI Smart Router series
MRS 1616-S
Host input interface
Input
16*SD-SDI
Format 525i30 625i25
MRS
MRS 1604-S
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 1616-S Series
87
MRS 3232-HS
32x32 SD/HD Smart Router Series
MRS
MRS3232-HS SD/HD SDI series is a kind of digital signal switcher with high quality and low cost, which suits for middle-small sized
broadcasting system, designed by Gefei Tech. The switching system adopts field blank switching, supplies independent external sync.
interface,The separation of the host and remote control panel makes it more convenient to use. The host is 1U chassis, with dual power,
which support simultaneously controlled by two remote control panels; through RS232 user can control the host by professional software
on PC.
Key Features
32x32 SD/HD Smart Router series
··20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting
··Support independent 32 channel bus outputs, and SD/HD inputs auto senescing
··Support external BB using field vanishing switching processing to ensure the switching without flicker and noise
··The host can be configured to support simultaneously controlled by two RCP through RS485
··Convenient to control by software through RS232
··3U chassis, with dual power
88
MRS 3232-HS
Technical Specification
Host input interface
Input
32*SD/HD-SDI
Format
525i30 625i25 720P50 720P60 720P60/M 1080i50
1080i60 1080i60/M 1080sf24 1080sf24/M 1080P241080P24/M 1080P25 1080P30
Host output interface
Output
32*SD/HD-SDI
Amplitude 800±5%
Jitter
<0.2UI
BB input
Input
1*BB PAL/NTSC
Host controller interface
connector
1xRS232 DB9 male
4*RS485 BNC
Power 2X120W
Dimensions
Size: 44 mm x1320 mm x80 mm
MRS
IMRS-XY Remote controller panel interface
Connector
2x RS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 3201RCP Remote controller panel interface
Connector
2x RS485 BNC
Power
1X2.5W
Dimensions
Size: 44 mm x440 mm x80 mm
MRS 1616-HS
MRS 1608-HS
MRS 1604-HS
MRS 1601-HS
MRS 1616-S
MRS 1608-S
MRS 1604-S
MRS 3232-HS
MRS-XY
MRS3201 RCP
32x32 SD/HD Smart Router series
Ordering information
16x16 HD & SD router,w/ remote control panel
16x8 HD & SD router,w/ remote control panel
16x4 HD & SD router,w/ remote control panel
16x1 HD & SD router,w/ remote control panel
16x16 SD router,w/ remote control panel
16x8 SD router,w/ remote control panel
16x4 SD router,w/ remote control panel
32x32 HD & SD router,w/ 1 X+Yremote control panel
X+Y Remote control panel for MRS 32xx Series and MRS 16x16 Series
32inputs select and 1output for MRS 32x32HS
MRS 3232-HS
89
Magi Stream3000
Video server
MagiStream3000 is designed for television broadcast system, as a convenient ,cost-effective, broadcast quality and mission-critical
reliability transmission server ,MagiStream3000 has more than 600 channels users up to now.
MagiStream3000 supports multiple media format file, the convenience communicate with the non-linear editing system, MAM system,
etc; supports SNMP, can be configured and monitored real-time through network. Based on the enterprise server hardware structure,
MagiStream3000 adopts modular structure, it supports up to six output channels. SD/HD output modules can be mixed in one
chassis, Every moudule is configured with 3ch HD/SD program outputs,one cue frame output,and one preview output. It support cross
conveter accroding to the AFD information and support embedded designated information manual.
Magi
MagiStream3000 configured with 3 Gigabit Ethernet interfaces,selectable SAS/FC RAID storage connector.dual-parity RAID ensures
that the system continues to operate even in the event of simultaneous failure of any two disk drives. Video I/O modules and
redundant power supplies can be hot-swapped for uninterrupted operation.MagiStream3000 fully meets the requirements of safe
broadcasting for 24*7.
Key Features
Video server
··Modular structure, HD/SD module selectable , up to sic channels, support mixed interpolation
··Open and share platform
··High compatibility, Supports various file format, mpeg-2, PS , ES , GXF, MXF etc.
··Based on CPCI server architecture, stronger IO processing power to deal with data processing
··Meet the multichannel \ various decoding application occasion
··Support cue frame output, operator can preview the first frame of next program
··Support AFD, auto cross convert, bar, letter or stretch selectable
··Embedded operating system, high reliability and stability
··Redundant power supplies
··Support SNMP
··More than 600 channels
More than 600 channels
90
Magi Stream3000
Interface
IChassis
D x W x H (mm): 440 x 177 x 320 mm (17.3" x 7" x 12.6")
Front Control:
Power On/Off System Reset Alarm Mute
Indicator:
Power Status HDD Activity LAN Activity FAN / Overheat Failure
Fans:
2 (front: 193 CFM, rear: 61.3 CFM)
PSU:
AC 100 ~ 254 V @ 50 ~ 60 Hz, full range
Temperature :
0 ~ 45° C (32 ~ 113° F)
Humidity :
20 ~ 90% @ 40° C, non-condensing
Shock:
10 G
Raid storage
SCSI\FC\SAS connector selectable
Magi
Technical Specification
Program output
3*HD-SDI/SD-SDI, BNC connector, 75 ohms
Cue frame output 1*HD-SDI/SD-SDI, BNC connector, 75 ohms
Preview output
1*SD-SDI
SD SDI: SMPTE 259M, ITU-R601, 525/625 line component, 10-bit
[email protected] 4:2:0, IBP & Long GOP 2-15 Mb/s
MPEG-2 @ML 4:2:2, IBP & Long GOP 4-50 Mb/s
Audio output
8CH*AES/EBU, 26DB female connect, 48 kHz sample rate
Software
Magi Live V5.0
MTBF
Backplane
800,000 hours
Fan module
50,000 hours @ 25 °C
Power supply 100,000 hours @ 70% load
Compliance
Video server
Format
HD-SDI: SMPTE 292M, 10-bit
[email protected] 4:2:0, IBP & Long GOP 12-50 Mb/s
MPEG-2 @HL 4:2:2, IBP & Long GOP 20-50 Mb/s
BB input 1*CVBS BNC connector, 75 ohms SMPTE 259M 270Mbps
RoHS, CE, FCC, UL, CCC
Magi Stream3000
91
Magi Con
Centralized Monitoring System by SNMP
Magi Con Comprehensive intelligent monitoring system supplies detection, management and maintenance of studios, broadcasting
centre and relative equipments. It can monitor the equipment working status and deal with stoppage intelligently which in order to get
the operation condition, to prevent equipment stoppage and improve the management level.
Especially, using the professional XIO9050HSM to monitor the node signal real-time, we can get more than 20 kinds of common
indicators which guarantees the broadcasting quality.
Features
Magi
··Based on SNMP protocol, supports network port and serial port
··Multiple monitoring method, room layout, rack layout, CAD etc.
··To monitor the working status of equipment and node signal,technology and intelligent strategy analysis, make sure whether the
system working condition is normal
··When something wrong happens, it can be located quickly and gives the alarming through graphic or voice to help operator deal with
failure, create the analysis log and alarm log
··Professional hardware detection card with professional software, the perfect combination
··Support 3D interactive flash, let users have a new experience
··Directly import dxf format files generated by AutoCAD to establish monitoring flow graphic when there is something wrong occurs, the
alarming information will show on the system diagram and graphic color changed
··The program supplies drawing tool, users can draw monitoring system diagram freely
··Intelligent fault location, quickly find the fault in the link source
··Multiple range alarming level, showing the way, the key link level, regional level
··Monitoring in separate categories, to ensure the division and personnel security
··The equipment failure memory, users can add the problem solutions to enrich the content
Centralized Monitoring System by SNMP
92
Magi Con
Monitoring and management of equipment work status
Magi
Supported equipment manufacturers
Centralized Monitoring System by SNMP
Signal quality monitoring
XIO9050 HSM
Magi Con
93
Magi
Software UI
Centralized Monitoring System by SNMP
Magi Con
94
Magi Smart IN
TS over IP signal ingest system
MagiSmartIn is designed for multi-channels recording signals came from satelite ,digital cable TV,or SDI/HDSDI. It adopts Magi
SmartGate series modules multimedia processor as a convert from QPSK / QAM / ASI/SDI/CVBS signals to the TS over IP, with 4-channel
recodering server cluster and Magi SmartDB database server, based on network ,Magi SmartIN ingest system can achieve a large
number IP stream automatically recording, management and data distribution.
Key Features
··Modular System
··Every function modular can be seamless extend
··Full signal source
··QPSK QAM ASI HD/SD-SDI AV
··Open System
··Based on WEB service and standard XLM/FTP/UDP/HTTP protocol
··Support video file formats such as DV25, DV50, DVCPRO HD, MPEG2, WMV, MPEG4,H.264, AVI,etc.
··Safety system
··Import program can ingested using different recorder server at the same time
··Base on DVB-C TR101290 3 level monitoring by IP multi-viewers
··Centralized device work status monitoring by SNMP
··Easy to use
··Kindly software UI
Magi
System structure
Centralized Monitoring System by SNMP
Magi Smart IN
95
Work flow
Magi
kindly Software UI
TS Over IP ingest and distrbute system
List Edit
InquiresbrowseEditor
96
Magi Smart IN
4 CH ingest
Migration
Magi Live
Professional program automation and master control solutions
Magi Live is a professional program automation system, with independent intellectual property rights, includes media ingest, media
management, playout automation, file based quality assurance (QA) workflow, system monitoring and so on. We can supply all series
broadcast product line, like video server, matrix, switching, signal processing peripheral, logo, CG, keyer, all of the broadcast control
system software and hardware product.
··The automatic quality assurance technology based on documents
judge is to ensure the key broadcast programming material safety,
In the process of program file upload doing the synchronously
automatic technology review is very efficiency.
Video servers are relatively independent with
play controller
··The Video server broadcast don’t completely dependent on play
controller, even if the master and slave controller machines strike
simultaneously,video server still continue to work without affected
Magi
Unique media ingest with
quality assurance and ALC
Inteligent closed-loop process monitoring ensure broadcast safe
Professional Program Automation and Master control solutions
··Real time work status monitoring for the broadcast system equipment
··Real-time audio alarm
··Timely alarm signal degradation
·· File based quality assurance (QA) workflow
·· Automatic quality check following program upload
·· MD5 check
·· file reviewed by software
·· Preview before playout
·· signal quality monitoring
HD/SD compatible, convenient to upgrade by business expansion
Supports many world famous video server and peripheral equipment
Provide different configuration solution
More than 600channels users
Magi Live
97
Magi Spy
TV signal monitoring and recording system
MagiSpy is designed for monitoring and recording multi-channel audio and video signals. It's widely applied to monitoring broadcast
quality errors, such as black video, freeze, signal lost,etc. if happened, the system will trap voice alarm and log. MagiSpy supports
monitoring and recording up to 4~32 channels program by single server. In addition, MagiSpy supply querying the recorded materials to
check the contents.
MagiSpy is compatible with Gefei's autoplay system, so it can realize querying the recorded files or alarm logs according to the program
play list. MagiSpy is your perfect choice for TV signal monitoring
Key Features
User-friendly interface
··Using the latest h.264 compression technology hardware decoding
··Up to 4-32 channels program by single server
··Multi-viewer layout can be designed freely
··Optional manual and automatic recording way
··Monitor and voice alarm for abnormal signal, black, frozen frame,
video loss, audio loss
··Support query materials or logs by Webpage remotely (Optional)
··Easy alarm query, supports key word and mixed conditions
··Various querying broadcasted errors
··Automatically deleted expired materials
Technical Specification
3U DP , 12 x H/S HDDs , SAS/SATA BP , Ideal For
Enterprise Storage Server
D x W x H (mm): 660 x 430 x 132 (mm)
Hot-Swap 3.5": 12 (SAS/SATA)
Front Control: Power On/Off System Reset Alarm Mute
Indicator: Power Status HDD Activity (x1) LAN
Activity (x2) FAN / Overheat Failure
Fans: 80 x 80mm T25mm fan
PSU: 650W 2+1 Redundant
Server
OS: Windows XP + SP2
CPU:XOEN E5506 2.13 GHZ CPU
Memory:46GB DDR3 RDIMM
System HDD :500GB SATAII
DVDROM
network interface :1x Broadcom 5709 Dual Port
1GbE NIC 2*1Gb RJ45)
Display adapter HD4830
Raid (Optional) Raid host controller
Encoder Card Magi CG DS Series
Video format: H.264 (MPEG-4/Part 10)
compression
Audio format: OggVorbis, 16Kbps compression
Video Input Interface: BNC (1.0Vp-p, 75 Ohm)
Audio Input Interface: BNC(2.0Vp-p, 1K Ohm)
Compression Resolution: 4CIF/DCIF/2CIF/CIF/
QCIF
Recording Frame Rate: 4CIF:10-12fps DCIF:2022fps 2CIF:2CIF/CIF:25(P)/30(N)fps
Video Bit Rate: 32Kbps~2Mbps adjustable
Software
Magi Spy V2.0
MTBF
1.2 million hours
Magi
Chassis
TV signal monitoring and recording system
98
Magi Spy
Applations
99
Magi
About GeFei
Magi
Company Branch
Business Domain
100
About GeFei
About GeFei
Magi
Quality Control
Users
About GeFei
101
ELPRO Video Labs s.r.l.
Expert in Video Signal Management
Strada della Pronda, 45/B
10142 Torino - Italy
Tel. +39 011 770 15 83
Fax +39 011 70 37 51
VAT IT 08368350016
[email protected]
www.elprovideolabs.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement