contactors motor protection Think future. Switch to green.

contactors motor protection Think future. Switch to green.
contactors
motor protection
Think future. Switch to green.
For Sales and Support call KMparts.com (866) 595-9616
contactors
General Information.............................................................. 2
DIL M Contactors (7 – 1000 Amps)....................................... 6
Miniature Contactors............................................................ 10
Reversing Contactor Combinations..................................... 12
Capacitor Switching Contactors........................................... 13
Accessories............................................................................. 15
Alternate Coil Voltages......................................................... 23
Replacement Coils................................................................. 29
Contact Travel Diagrams....................................................... 32
Utilization Curves.................................................................. 34
Technical Data........................................................................ 38
Dimensions............................................................................ 61
motor protection
General Information.............................................................. 74
Contactor to Overload Protection Guide............................. 75
Series Z Thermal Overload Relays........................................ 76
ZW7 Current Transformer Overload Relays......................... 81
ZEV Electronic Motor Protective Relay................................ 89
EMT Thermistor Protection Relays....................................... 97
A numerical and alphabetical index can be found in the pricing
guide at the end of this catalog.
For Sales and Support call KMparts.com (866) 595-9616
series DIL M contactors
Reliable switching for applications up to 1000A
Moeller’s DIL M contactor line packs all the control you need into a smart, compact
design. Our modern IEC contactors can handle up to 1000A in virtually any application worldwide. Their compliance with IEC standards ensures the most accurate
match to your motor size – you’ll never buy more control than you need.
R
For a broad range of applications
Twenty-four contactors in seven frame sizes cover all applications from fractional
to 1000HP (@ 575V). This extensive range allows you to select exactly the right
size for your application, whether it be resistive AC-1 environments; common
starting and stopping AC-3 applications; or even extreme AC-4 situations involving inching and plugging of motors.
Easy installation by design
The DIL M contactor series features dual power terminals on units up to 400A. The
clamping chambers are cleverly designed to apply
sufficient holding pressure to cables of varying sizes.
Conventional designs are often limited by the size of
the largest cable in the chamber.
> 24 contactors
> 7 frame sizes
> Switches motors up to 1000HP
> Same compact dimensions
for AC and DC units
The line also features ingenious mechanical interlocks (rocker and ball style) that allow fast and easy
assembly of contactor combinations without requiring additional space. Many contactors can be interlocked both horizontally and vertically.
Accessories extend flexibility
Several ranges within the DIL M series share common auxiliary contacts and other
components. This lowers inventories even when accommodating a complete
range of control solutions. Voltage indicators, reversing kits, and many other optional accessories are also available.
Safety
(app
photo)
All DIL M series contactors provide isolation and protection from direct hand contact. Even the largest contactors accept terminal shields.
For Sales and Support call KMparts.com (866) 595-9616
DIL M Low Range
Special advantages of going DC
Moeller’s DIL M contactor series includes a completely
NEW offering in the lower 7 to 150A range. Consisting
of four frame sizes, this range is the newest and most
modern of any control manufacturer!
In addition to sharing the same frame size as AC contactors, DC units of 17A and above also feature electronic
drives that dramatically reduce pick-up and sealing consumption. These drives produce several benefits:
• less heat is generated, eliminating the
need for a fan
Compact
design for BOTH
currents
• smaller control transformers are required
Conventional contactors
designed for DC control
applications can be up
to 30% larger than their
AC counterparts. Not anymore! Unique to Moeller’s DIL
M contactors, AC and DC units are the same frame size
throughout the entire range. The reduced size means
smaller DC panels than ever before. This also means you
can now design one panel for either AC or DC control,
without having to plan for a larger DC contactor.
Easy to assemble
Coil terminals are located on the front of the new contactors to simplify wiring. Both
two and four-pole auxiliary contacts snap on without tools. Units
40A and above accept both side
and top mount auxiliaries for increased flexibility. In addition, devices up to 32A include
built-in auxiliary contacts for increased economy with
no additional space requirement.
• contactors up to DIL M32 can be directly
actuated from PLCs, eliminating the need for
a coupling relay
These benefits lower your cost by consuming less power, eliminating additional components, and permitting
higher packing density in the panel.
DC units to 150A also carry a built-in high-speed suppressor circuit, eliminating the need for purchasing and
installing a separate external suppressor. Again, lower
total cost and smaller panel space result.
For additional safety and convenience, Moeller’s DIL M
DC contactors feature an expanded voltage tolerance,
beyond that specified by IEC/EN 60947. This accommodates a range of -30% to +20% for DIL M contactors
17A and above. It is one of the largest voltage tolerance
ranges of any control manufacturer.
+20%
-30%
Positively driven contacts
for additional safety
Auxiliary contact blocks for new DIL M contactors are available with positively driven
contacts for added safety in control circuit
schemes. Positively driven auxiliary contacts insure that, throughout the life of the
contactor, N.O. & N.C. auxiliary contacts will
never be closed simultaneously.
For Sales and Support call KMparts.com (866) 595-9616
DIL M High Range
DIL EM Miniature Contactors
For heavy-duty applications, Moeller’s contactor line
continues with the DIL M185 to DIL M1000. This range
includes 11 contactors in three frame sizes. All applications and worldwide voltages, both AC and DC, can be
accommodated with only four coils.
Moeller also offers a miniature contactor, the DIL EM.
Designed for small loads, it is available in units up to
20A, and provides reliable performance for motors up
to 5HP (@575V). AC and DC units are available.
On-board electronics
for efficient operation
All DIL M185 to 1000 contactors utilize electronicallycontrolled magnet systems. This feature provides flexible actuation, and contributes to lower panel temperature, smaller control transformer requirements
and greater control voltage tolerance. Direct actuation
from a PLC or other low level source is easily accomplished. In addition, a built-in suppressor circuit for
control protection is standard. All of this adds up to
fewer external components and smaller panel space.
The DIL EM miniature contactor features a large ambient temperature range, and its low power consumption permits direct actuation from a PLC. The DC version
of the DIL EM also includes an integrated suppressor to
protect from voltage peaks that may occur when the
coil is disconnected. Top-mount auxiliary contacts are
available in both 2- and 4-pole configurations.
Standards and Approvals
Moeller’s DIL M and DIL EM contactors carry UL, CSA,
IEC/EN 60947 and VDE 0660 approvals. They are manufactured to ISO 9001 quality standards.
Vacuum contactors
designed for small size, long life
DIL M580 to DIL M1000 are vacuum contactors. This
feature reduces contact damage caused by electrical
arcing, leading to longer life of the contactor. It also
permits tighter packing density in the panel because
there are no open arcs or escaping gases that would
typically require additional space for dissipation.
For Sales and Support call KMparts.com (866) 595-9616
Moeller Contactor Family and Equivalent NEMA Sizes
Frame Size
Moeller
Contactor
DIL M7
Maximum Horsepower (UL/CSA)
Single Phase
Three Phase
115 Volt
230 Volt
200 Volt
230 Volt
460 Volt
575 Volt
1
1½
2
3
5
1
1½
1½
2
2
½
1½
3
3
5
7½
1
2
3
3
5
5
1
2
2
3
3
5
3
5
10
10
10
15
2
3
7½
7½
10
10
2
3
5
5
7½
10
7½
10
15
20
20
25
3
7½
10
15
25
25
3
3
5
7½
10
15
10
15
20
15
20
25
30
40
50
40
50
60
7½
15
25
30
50
50
DIL M80 ➊
DIL M95 ➊
7½
7½
15
15
25
25
30
40
60
75
75
100
–
–
40
50
100
100
DIL M115 ➊
DIL M150 ➊
DIL M185
DIL M225
10
15
–
–
25
30
–
–
40
40
50
60
50
60
60
75
100
125
125
150
125
150
150
200
–
–
75
100
200
200
DIL M250
DIL M300
DIL M400
–
–
–
–
–
–
75
100
150
100
125
150
200
250
300
250
300
400
–
–
150
200
400
400
DIL M500
DIL M580
DIL M650
–
–
–
–
–
–
150
200
200
200
200
250
400
400
500
500
600
600
–
–
–
300
600
600
–
–
–
–
250
290
300
350
600
700
700
860
–
–
–
450
900
900
–
–
–
400
800
1000
DIL M9
DIL M12
DIL M17
DIL M25
DIL M32
DIL M40
DIL M50
DIL M65
DIL M750
DIL M820
DIL M1000
NEMA Size 00
NEMA Size 0
NEMA Size 1
NEMA Size 2
NEMA Size 3
NEMA Size 4
NEMA Size 5
NEMA Size 6
Compare Moeller’s 24 contactor sizes to just 10 equivalent NEMA sizes
¼
1/3
NEMA Size 7
NEMA Size 8
➊ Final ratings in preparation. Contact your Moeller representative.
For Sales and Support call KMparts.com (866) 595-9616
Contactors
AC Coil
>Four compact frame sizes cover applications to 150A
>Space-saving design reduces panel space and cost
>Dual box terminals make wiring safer and easier for cables with
uneven cross-sections
>New Kombi (combination) plug-in technology provides tooless
connection with other starting components up to DIL M12
Three Pole Contactors with 120V AC Coil (to 150 Amps) ➊➋➎
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
AC-1
(@400V)
AC-3
Single Phase
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
7
20
2.2
3
3.5
1/4
3/4
1
1½
2
3
5
9
20
2.5
4
4.5
1/2
1
1½
3
3
5
7½
12
20
3.5
5.5
6.5
1
2
2
3
3
10
10
18
35
5
7.5
11
2
2
3
5
5
10
15
Auxiliary
Contacts
Type
Article
Number
NO
NC
1
0
DILM7-10(120V60HZ) ➌
276547
0
1
DILM7-01(120V60HZ) ➌
276582
1
0
DILM9-10(120V60HZ) ➌
276687
0
1
DILM9-01(120V60HZ) ➌
276722
1
0
DILM12-10(120V60HZ) ➌
276827
0
1
DILM12-01(120V60HZ) ➌
276862
1
0
DILM17-10(120V60HZ)
277001
0
1
DILM17-01(120V60HZ)
277033
1
0
DILM25-10(120V60HZ)
277129
0
1
DILM25-01(120V60HZ)
277161
1
0
DILM32-10(120V60HZ)
277257
25
40
7.5
11
14
2
3
5
7½
7½
15
20
32
40
10
15
17
3
5
5
10
10
20
25
0
1
DILM32-01(120V60HZ)
277289
40
50
12.5
18.5
23
3
5
7½
10
15
30
40
0
0
DILM40(120V60HZ) ➍
277763
50
60
12.5
22
30
3
7½
10
15
20
40
50
0
0
DILM50(120V60HZ) ➍
277827
65
72
20
30
35
5
10
15
20
25
50
60
0
0
DILM65(120V60HZ) ➍
277891
80
110
25
37
48
7½
15
15
25
30
60
75
0
0
DILM80(120V60HZ)
239399
95
110
30
45
57
7½
15
15
25
40
75
100
0
0
DILM95(120V60HZ)
239477
115
160
37
55
70
10
25
25
40
50
100
125
0
0
DILM115(RAC120)
239547
150
160
48
75
91
15
25
30
40
60
125
150
0
0
DILM150(RAC120)
239587
Price
See green
pages
UL/CSA pending for DILM80 – DILM150. Product available in Fall 2005. Contact your Moeller representative.
➊ Positively-driven contacts with DILM7 to DILM32 between integrated auxiliary
Ordering Instructions
2
1
Order using
the Type
& Article
Number
Locate the
desired
contactor
3
See page 23
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
contact and auxiliary contact module, as well as within the auxiliary contact modules. Mirror contact with with DILM7-01 to DILM32-01, as well as in combination
with auxiliary contact modules.
➋ Contact elements of the contactor to EN 50012.
➌ Coils not replaceable.
➍ Positively-driven contacts within the auxiliary contact module. Mirror contact in
combination with auxiliary contact module. Combination of side-mounted and
front auxiliary contact modules up to six auxiliary contacts possible.
➎ Standard coil is rated for 120V AC - 60Hz and 110V AC - 50Hz. See page 23 for
alternative coil voltages.
For Sales and Support call KMparts.com (866) 595-9616
Contactors
DC Coil
>Same compact size as Moeller’s AC contactors, saving panel space
>Electronically controlled magnet system (from DILM17) provides many
advantages:
– Significantly less heat dissipation due to reduced sealing consumption
– Smaller control transformers because of lower pick-up consumption
– Direct actuation from the PLC without coupling contactors (to DILM32)
>Integrated surge suppressor
Three Pole Contactors with 24V DC Coil (to 150 Amps) ➊➋➎
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
AC-1
7
20
(@400V)
AC-3
Single Phase
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
2.2
3
3.5
1/4
3/4
1
1½
2
3
5
Auxiliary
Contacts
Type
Article
Number
NO
NC
1
0
DILM7-10(24VDC) ➌
276565
0
1
DILM7-01(24VDC) ➌
276600
1
0
DILM9-10(24VDC) ➌
276705
0
1
DILM9-01(24VDC) ➌
276740
1
0
DILM12-10(24VDC) ➌
276845
0
1
DILM12-01(24VDC) ➌
276880
1
0
DILM17-10(RDC24)
277018
0
1
DILM17-01(RDC24)
277050
1
0
DILM25-10(RDC24)
277146
0
1
DILM25-01(RDC24)
277178
1
0
DILM32-10(RDC24)
277274
0
1
DILM32-01(RDC24)
277306
9
20
2.5
4
4.5
1/2
1
1½
3
3
5
7½
12
20
3.5
5.5
6.5
1
2
2
3
3
10
10
18
35
5
7.5
11
2
2
3
5
5
10
15
25
40
7.5
11
14
2
3
5
7½
7½
15
20
32
40
10
15
17
3
5
5
10
10
20
25
40
50
12.5
18.5
23
3
5
7½
10
15
30
40
0
0
DILM40(RDC24) ➍
277780
50
60
12.5
22
30
3
7½
10
15
20
40
50
0
0
DILM50(RDC24) ➍
277844
65
72
20
30
35
5
10
15
20
25
50
60
0
0
DILM65(RDC24) ➍
277908
80
110
25
37
48
7½
15
15
25
30
60
75
0
0
DILM80(RDC24)
239416
95
110
30
45
57
7½
15
15
25
40
75
100
0
0
DILM95(RDC24)
239510
115
160
37
55
70
10
25
25
40
50
100
125
0
0
DILM115(RDC24)
239555
150
160
48
75
91
15
25
30
40
60
125
150
0
0
DILM150(RDC24)
239591
Price
See green
pages
UL/CSA pending for DILM80 – DILM150. Product available in Fall 2005. Contact your Moeller representative.
➊ Positively-driven contacts with DILM7 to DILM32 between integrated auxiliary
Ordering Instructions
1
Locate the
desired
contactor
2
Order using
the Type
& Article
Number
3
See page 25
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
contact and auxiliary contact module, as well as within the auxiliary contact modules. Mirror contact with with DILM7-01 to DILM32-01, as well as in combination
with auxiliary contact modules.
➋ Contact elements of the contactor to EN 50012.
➌ Coils not replaceable.
➍ Positively-driven contacts within the auxiliary contact module. Mirror contact in
combination with auxiliary contact module. Combination of side-mounted and
front auxiliary contact modules up to six auxiliary contacts possible.
➎ DC-operated contactors have an integrated surge suppressor.
For Sales and Support call KMparts.com (866) 595-9616
Contactors
AC & DC Coil
>Heavy duty contactors for demanding applications
>All contactors in this range feature electronically controlled magnet
systems that dramatically reduces pick-up & seal-in, while increasing
control voltage tolerance
>Direct connection to PLCs and low level input devices
>Large HP devices (from DILM580) are vacuum contactors, which
increase electrical lifespan and decrease space requirements
>Built-in suppressor circuit for control protection
Three-pole Contactors with 110 to 250V AC or DC Electronic Coil (185 to 1000 Amps) ➊
Maximum Ratings for Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 1000V 200 V 230 V 460 V 575 V
AC-3
AC-1
185
275
55
90
175
108
50
225
315
70
110
215
108
250
350
75
132
240
108
300
400
90
160
286
400
500
125
200
344
500
700
155
250
580
800
185
650
850
750
(@400V)
Auxiliary
Contacts
NO
NC
Article
Number
Type
60
125
150
2
2
DILM185/22(RA250)
208193
60
75
150
200
2
2
DILM225/22(RA250)
208197
75
100
200
250
2
2
DILM250/22(RA250)
208201
132
100
125
250
300
2
2
DILM300/22(RA250)
208205
132
125
150
300
400
2
2
DILM400/22(RA250)
208209
344
132
150
200
400
500
2
2
DILM500/22(RA250)
208213
315
560
600
200
200
400
600
2
2
DILM580/22(RA250) ➋
208216
205
355
630
600
200
250
500
600
2
2
DILM650/22(RA250) ➋
208219
900
240
400
720
800
250
300
600
700
2
2
DILM750/22(RA250) ➋
208222
820
1000
260
450
750
800
290
350
700
860
2
2
DILM820/22(RA250) ➋
208225
1000
1000
315
560
1000
1000
–
400
800
1000
2
2
DILM1000/22(RA250) ➋
267214
Price
See green
pages
Application Notes
Direct from the PLC
Conventional
A1/A2 are applied to voltage in the usual manner.
(+) L1
(–) N
A 24 V output from the PLC can be connected
directly to connections A3/A4.
(+) L1
(–) N
A2
A11
A1
Command devices which can only be subject to minimal
loads such as circuit board relays, control circuit devices or
position switches can be connected directly to A10/A11.
(+) L1
(–) N
�
A10
From low-consumption command devices
�
A3
A10
A2
A11
A1
�
A10
A2
A11
A1
A3
A4
A4
A3
A4
24 V
GND
Ordering Instructions
2
1
Order using
the Type
& Article
Number
Locate the
desired
contactor
3
See page 24
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
➊Wide range coil: 110 – 250 V; 40-60Hz AC / DC.
660V, 690V or 1000V.
Do not reverse directly.
➋When operating with frequency inverters or when performing a high-voltage
test, the suppressor on the load side must be removed.
➌ Standstill in an emergency (Emergency Stop)
For Sales and Support call KMparts.com (866) 595-9616
Contactors
Four Pole – AC & DC Coil
>Space-saving four-pole design reduces panel space and cost
>Dual box terminals make wiring safer and easier for cables with
uneven cross-sections
>DC operated contactors have an integrated surge suppressor
Four Pole Contactors with 120V AC Coil ➊➋
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
(@400V)
AC-1
12
20
AC-3
Single Phase
Three Phase
220 V 380 V 660V
230 V 400V 690V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
3.5
5.5
6.5
1/2
1
1½
3
3
5
7½
Auxiliary
Contacts
NO
0
NC
0
Type
DILMP20(120V60HZ)
Article
Number
Price
276970
See green
pages
UL/CSA pending. Product available in Fall 2005. Contact your Moeller representative.
Four Pole Contactors with 24V DC Coil ➊
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
(@400V)
AC-1
12
20
AC-3
Single Phase
Three Phase
220 V 380 V 660V
230 V 400V 690V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
3.5
5.5
6.5
1/2
1
1½
3
3
5
7½
Auxiliary
Contacts
NO
0
NC
0
Type
DILMP20(24VDC)
Article
Number
Price
276985
See green
pages
UL/CSA pending. Product available in Fall 2005. Contact your Moeller representative.
Ordering Instructions
1
Locate the
desired
contactor
2
Order using
the Type
& Article
Number
3
See pages
23 & 25 for
different coil
voltages
4
See pages
15 - 22 for
auxiliaries &
accessories
➊Coil not replaceable.
➋Standard coil is rated for 120V AC - 60Hz and 110V AC - 50Hz. See pages 23 & 25
for alternative coil voltages.
For Sales and Support call KMparts.com (866) 595-9616
Miniature Contactors
AC & DC Coil
>Miniature, economical contactors for small motors and loads
>Approved for worldwide use
>High degree of climatic approvals and large ambient temperature range
>AC and DC operated versions available
Miniature Three Pole Contactors with 120V AC Coil ➊➋
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
Single Phase
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
AC-3
AC-1
9
20
2.2
4
4
1/2
1
1½
2
3
5
9
20
2.2
4
4
1/2
1
1½
2
3
5
(@400V)
Auxiliary
Contacts
Type
Article
Number
NO
NC
5
1
0
DILEM-10(120V60HZ)
051783
5
0
1
DILEM-01(120V60HZ)
051792
Price
See green
pages
Miniature Three Pole Contactors with 24V DC Coil ➊
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
Single Phase
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
AC-3
AC-1
9
20
2.2
4
4
1/2
1
1½
2
3
5
9
20
2.2
4
4
1/2
1
1½
2
3
5
(@400V)
Auxiliary
Contacts
Type
Article
Number
NO
NC
5
1
0
DILEM-10-G(24VDC)
010213
5
0
1
DILEM-01-G(24VDC)
010343
Price
See green
pages
Ordering Instructions
2
1
Order using
the Type
& Article
Number
Locate the
desired
contactor
3
See page 26
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
➊Coil not replaceable.
➋Standard coil is rated for 120V AC - 60Hz and 110V AC - 50Hz. See page 26 for
alternative coil voltages.
10
For Sales and Support call KMparts.com (866) 595-9616
Miniature Contactors
Four Pole – AC & DC Coil
>Miniature, economical four-pole contactors
>Approved for worldwide use
>High degree of climatic approvals and large ambient temperature range
>AC and DC versions available
Miniature Four Pole Contactors with 120V AC Coil ➊➋
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
(@400V)
AC-1
12
20
AC-3
Single Phase
Three Phase
220 V 380 V 660V
230 V 400V 690V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
2.2
4
4
1/2
1
1½
2
3
5
5
Auxiliary
Contacts
NO
0
NC
0
Type
DILEM4(120V60HZ)
Article
Number
Price
051801
See green
pages
Miniature Four Pole Contactors with 24V DC Coil ➊
Maximum Ratings for Single and Three Phase Motors
kW
UL / CSA HP
Ie [A]
AC-3
(@400V)
AC-1
12
20
AC-3
Single Phase
Three Phase
220 V 380 V 660V
230 V 400V 690V 115 V 200 V 230 V 200 V 230 V 460 V 575 V
2.2
4
4
1/2
1
1½
2
3
5
5
Auxiliary
Contacts
NO
0
NC
0
Type
DILEM4-G(24VDC)
Article
Number
Price
012701
See green
pages
Ordering Instructions
1
Locate the
desired
contactor
2
Order using
the Type
& Article
Number
3
See page 26
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
➊Coil not replaceable.
➋Standard coil is rated for 120V AC - 60Hz and 110V AC - 50Hz. See page 26 for
alternative coil voltages.
For Sales and Support call KMparts.com (866) 595-9616
11
Reversing Contactor Combinations
DILM Contactors
>Space-saving design reduces panel space and cost
>Units are pre-assembled with electrical and mechanical interlocks
>Ingenious mechanical interlock adds no additional space
>Dual box terminals make wiring safer and easier for cables with
uneven cross-sections
Reversing Contactor Combinations with120V AC Coil ➊➋➎
Maximum Ratings for Three Phase Motors
kW
Ie [A]
AC-3
(@400V)
AC-3
Three Phase
220 V 380 V 660 V
230 V 400 V 690 V 200 V 230 V 460 V 575 V
Auxiliary
Contacts
NO
NC
Type
Article
Number
7
2.2
3
3.5
1½
2
3
5
2
1
DIULM7/21(120V60HZ) ➌
278058
9
2.5
4
4.5
3
3
5
7½
2
1
DIULM9/21(120V60HZ) ➌
278083
12
3.5
5.5
6.5
3
3
10
10
2
1
DIULM12/21(120V60HZ) ➌
278108
18
5
7.5
11
5
5
10
15
2
1
DIULM17/21(120V60HZ) ➌
278133
25
7.5
11
14
7½
7½
15
20
2
1
DIULM25/21(120V60HZ)
278158
32
10
15
17
10
10
20
25
2
1
DIULM32/21(120V60HZ)
278183
40
12.5
18.5
23
10
15
30
40
1
1
DIULM40/11(120V60HZ) ➍
278208
50
15.5
22
30
15
20
40
50
1
1
DIULM50/11(120V60HZ) ➍
278233
65
20
30
35
20
25
50
60
1
1
DIULM65/11(120V60HZ) ➍
278258
Price
See green
pages
Note: Larger sizes available. Contact your Moeller representative.
➊ Positively-driven contacts with DILM7 to DILM32 between integrated auxiliary
Ordering Instructions
2
1
Order using
the Type
& Article
Number
Locate the
desired
contactor
12
3
See page 28
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
contact and auxiliary contact module, as well as within the auxiliary contact modules. Mirror contact with with DILM7-01 to DILM32-01, as well as in combination
with auxiliary contact modules.
➋ Contact elements of the contactor to EN 50012.
➌ Coils not replaceable.
➍ Positively-driven contacts within the auxiliary contact module. Mirror contact in
combination with auxiliary contact module. Combination of side-mounted and
front auxiliary contact modules up to six auxiliary contacts possible.
➎ Standard coil is rated for 120V AC - 60Hz and 110V AC - 50Hz. See page 28 for
alternative coil voltages.
For Sales and Support call KMparts.com (866) 595-9616
Special Use Contactors
Capacitor Switching Contactors
>Economical solution for both individual and group power factor
correction applications
>Special weld resistant contact material ensures longer life
With Series Resistors
Three-Phase
Capacitors
Application Note
In the case of group compensation, multi-stage
capacitor banks are connected to the main supply as
required. In the process, transient currents of up to
180 x Ie can flow between the capacitors.
Auxiliary
Contacts
50 – 60 Hz
240 V 480 V 600 V
kvar kvar kvar
NO
NC
Article
Number
Type
6
12
15
1
1
DIL00MK-11(120V60HZ)
047020
6
12
15
0
2
DIL00MK-02(120V60HZ)
047031
10
20
25
1
0
DIL0MK-10(120V60HZ)
047042
15
25
36
1
0
DIL1MK-10(120V60HZ)
047052
25
45
60
1
0
DIL2MK-10(120V60HZ)
047062
Circuit With Quick Discharge Resistor
Circuit Without Quick Discharge Resistor
L1 L2 L3
L1 L2 L3
A1
1 3 5
21 31
A1
1 3 5
A2
2 4 6
22 32
A2
2 4 6
Price
See green
pages
The capacitors are pre-charged via the early-make
auxiliary contacts and the fitted wire resistors,
thereby reducing the inrush current. The main
contacts then close after a time lag and carry the
uninterrupted current.
Moeller’s Capacitor Switching Contactors are weldresistant with inrush current peaks up to 180 x Ie
due to their special contact material.
Through the use of quick-discharge resistors, the
danger of complete polarity reversal in the event
of rapidly recurring closure can be excluded. The
resultant discharge times are 0.2 s. The resistor is
switched by means of two auxiliary contacts of the
contactor.
22 4 32
R1
R11
R1
R11
R11
R11
C1
C1
R11
R11
Ordering Instructions
1
Locate the
desired
contactor
2
Order using
the Type
& Article
Number
3
See page 27
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
For Sales and Support call KMparts.com (866) 595-9616
13
Special Use Contactors
Capacitor Switching Contactors
>Economical solution for both individual and group power factor
correction applications
>Special weld resistant contact material ensures longer life
Without Series Resistors
Three-Phase
Capacitors
50 – 60 Hz
240 V 480 V 600 V
kvar kvar kvar
30
60
Application Note
Auxiliary
Contacts
NO
75
NC
2
Type
DIL3MK72/22(120V60HZ)
2
Circuit With Quick Discharge Resistor
Article
Number
Price
209974
See green
pages
Circuit Without Quick Discharge Resistor
L1 L2 L3
L1 L2 L3
A1
1 3 5
21 31
A1
1 3 5
A2
2 4 6
22 32
A2
2 4 6
In the case of group compensation multi-stage
capacitor banks are connected to the main supply, as
required. In the process, transient currents of up to
180 x Ie can flow between the capacitors.
The contactors for capacitor are weld-resistant with
inrush current peaks up to 180 x Ie due to their
special contacts.
Through the use of quick-discharge resistors, the
danger of complete polarity reversal in the event
of rapidly recurring closure can be excluded. The
resultant discharge times are 0.2 s. The resistor is
switched by means of two auxiliary contacts of the
contactor.
22 4 32
R1
R11
R1
R11
R11
R11
C1
C1
R11
R11
Ordering Instructions
2
1
Order using
the Type
& Article
Number
Locate the
desired
contactor
14
3
See page 27
for a different
coil voltage
4
See pages
15 - 22 for
auxiliaries &
accessories
For Sales and Support call KMparts.com (866) 595-9616
Accessories
DILM Contactors
Auxiliary Contact Modules (for DILM7 to DILM32 Contactors) ➊➋
Auxiliary
NO
NC
Contact
Sequence
For use with...
Type
Article
Number
Price
Top Mount - Standard Terminal Markings
21 33
1
1
0
2
22 34
DILM32-XHI11
277376
DILM32-XHI02
277375
DILM32-XHI22
277377
DILA-XHI20
276422
DILA-XHI11
276421
DILA-XHI02
276420
DILA-XHIV11
276423
DILA-XHI40
276428
DILA-XHI31
276427
DILA-XHI22
276426
DILA-XHI13
276425
DILA-XHI04
276424
DILA-XHIV22
276429
21 31
DILM7-10...
to
DILM32-10...
22 32
See
green
pages
➌
21 31 43 53
2
2
22 32 44 54
Top Mount - Alternative Terminal Markings
53 63
2
0
54 64
53 61
1
1
54 62
51 61
0
2
52 62
57 65
1EM ➍
1LB ➍
4
0
3
1
2
2
1
3
0
4
1+
1EM ➍
1+
1LB ➍
58 66
53 63 73 83
54 64 74 84
53 61 73 83
54 62 74 84
53 61 71
83
54 62 72
84
DILM7...
to
DILM32...
See
green
pages
53 61 71 81
54 62 72 82
51 61 71 81
52 62 72 82
57 65 71
83
58 66 72
84
➊ All auxiliary contacts are positively driven except …XHIV….
➋ DILM-7 to DILM-32 contactors include a built-in one pole auxiliary contact.
Additional auxiliaries are top-mount only.
➌ The 2 and 4 pole DILM32-XHI... auxiliary contact modules cannot be combined
with DILM...-01 contactors.
➍ EM = Early Make
LB = Late Break
For Sales and Support call KMparts.com (866) 595-9616
15
Accessories
DILM Contactors
Auxiliary Contact Modules (for DILM40 to DILM1000 Contactors) ➊
Auxiliary
NO
NC
Contact
Sequence
Type
Article
Number
DILM150-XHI20
277945
DILM150-XHIA11
283463
DILM150-XHI11
277946
DILM150-XHI02
277947
DILM150-XHI40
277948
DILM150-XHI31
277949
DILM150-XHI22
277950
DILM150-XHIA22
283464
DILM150-XHI13
277951
DILM150-XHI04
277952
DILM150-XHIV22
277953
DILM1000-XHI11-SI ➋
278425
For use with...
Price
Top Mount - Standard Terminal Markings
13 23
2
0
1
1
1
1
0
2
14 24
53 61
54 62
13 21
14 22
11 21
12 22
13 23 33 43
4
0
14 24 34 44
DILM40...
to
DILM150...
13 21 33 43
3
1
14 22 34 44
See
green
pages
13 21 31 43
2
2
14 22 32 44
2
2
1
3
53 61 71
83
54 62 72
84
13 21 31 41
14 22 32 42
11 21 31 41
0
4
12 22 32 42
1+
1EM ➌
1+
1LB ➌
13 21 35 47
14 22 36 48
Side Mount - Standard Terminal Markings
44
43
22
31
48
25
36
47
26
13
14
17
18
53
84
1
1LB ➌
DILM40...
to
DILM1000...
35
1EM ➌
21
32
1
DILM1000-XHIV11-SI ➋
278426
DILM1000-XHI11-SA ➋
278427
See
green
pages
Side Mount - Alternative Terminal Markings
61
DILM80...
to
DILM1000...
72
1
83
54
62
71
1
Auxiliary contact module fitting options
DILM1000-XHI...-SI
+
➊ All auxiliary contacts are positively driven except …XHIV….
➋ Replaces DILM820-XHI11-...
➌ EM = Early Make
16
DILM40 –
DILM1000
+
+
DILM1000-XHI...-SA
LB = Late Break
+
For Sales and Support call KMparts.com (866) 595-9616
See
green
pages
Accessories
DILEM Contactors
Auxiliary Contact Modules (for DILEM Miniature Contactors) ➊➋
Auxiliary
NO
NC
Contact
Sequence
For use with...
Type
Article
Number
Price
Top Mount - Standard Terminal Markings
21 31
0
2
1
1
22 32
21 33
DILEM-10(-G)...
DILEM-4(-G)...
22 34
02DILEM
010064
11DILEM
010080
22DILEM
010112
02DILE
010240
11DILE
010224
20DILE
010208
11DDILE
049824
04DILE
010256
13DILE
002397
22DILE
010288
31DILE
048912
40DILE
010304
22DDILE
049823
See
green
pages
21 31 43 53
2
2
22 32 44 54
Top Mount - Alternative Terminal Markings
51 61
0
2
1
1
2
0
1EM ➌
1LB ➌
0
4
1
3
2
2
3
1
4
0
1+
1EM ➌
1+
1LB ➌
52 62
53 61
54 62
53 63
54 64
57 65
58 66
51 61 71 81
52 62 72 82
53 61 71 81
DILEM-10(-G)...
DILEM-01(-G)...
DILEM-4(-G)...
54 62 72 82
53 61 71
83
54 62 72
84
See
green
pages
53 61 73 83
54 62 74 84
53 63 73 83
54 64 74 84
57 65 71
83
58 66 72
84
➊ DILE Terminal Markings comply with European Standards EN 50005 while DILEM
Terminal Markings comply with EN 50005 and EN 50012.
➋ Auxiliary Contact Modules have interlocked opposing contacts
(does not apply to early-make or late-break contacts).
➌ EM = Early Make
LB = Late Break
For Sales and Support call KMparts.com (866) 595-9616
17
Accessories
DILEM & DILM Contactors
Suppressors and Voltage Indicator ➊
Suppressor /
Voltage Indicator
Notes
Voltage
Schematic
For use with...
Type
Article
Number
Price
RC Suppressors ➊
For AC operated contactors
(50-60 Hz).
Please be aware that RC
Suppressors can cause a dropout delay.
RCDILE48
044264
RCDILE250
046320
DILM12-XSPR48
281199
DILM12-XSPR240
281200
DILM12-XSPR500
281201
DILM32-XSPR48
281202
DILM32-XSPR240
281203
DILM32-XSPR500
281204
DILM95-XSPR48
281205
DILM95-XSPR240
281206
DILM95-XSPR500
281207
VGDILE48
010320
VGDILE250
010336
VGDILE415
010463
DILM12-XSPV48
281208
DILM12-XSPV130
281209
DILM12-XSPV240
281210
240 – 500
DILM12-XSPV500
281211
24 – 48
DILM32-XSPV48
281212
DILM32-XSPV130
281213
DILM32-XSPV240
281214
240 – 500
DILM32-XSPV500
281215
24 – 48
DILM95-XSPV48
281216
DILM95-XSPV130
281217
DILM95-XSPV240
281218
DILM95-XSPV500
281219
24 – 48
A1
DILEM
A2
110 – 250
24 – 48
DILM7 – DILM12
DILMP20
110 – 240
For AC operated contactors
(50-60 Hz).
DC operated Contactors have an
integrated suppressor. Please
be aware that Suppressors can
cause a drop-out delay.
240 – 500
24 – 48
A1
110 – 240
240 – 500
DILM17 – DILM32
A2
24 – 48
110 – 240
DILM40 – DILM95
240 – 500
See
green
pages
Varistor Suppressors ➊
24 – 48
For AC operated Contactors
(50-60 Hz).
DC operated Contactors have an
integrated suppressor.
A1
110 – 250
DILEM
A2
380 – 415
24 – 48
48 – 130
DILM7 – DILM12
DILMP20
130 – 240
For AC operated Contactors
(50-60 Hz).
DC operated Contactors have an
integrated suppressor.
48 – 130
130 – 240
A1
DILM17 – DILM32
A2
48 – 130
DILM40 – DILM95
130 – 240
240 – 500
➊RC Suppressor and Varistor Suppressor cannot be used at the same time.
18
For Sales and Support call KMparts.com (866) 595-9616
See
green
pages
Accessories
DILEM & DILM Contactors
Suppressors and Voltage Indicator (continued) ➊
Suppressor /
Voltage Indicator
Notes
Voltage
Schematic
For use with...
Type
Article
Number
Price
Varistor Suppessor with Integrated LED ➊
24 – 48
For AC operated Contactors
(50-60 Hz).
DC operated Contactors have an
integrated suppressor.
DILM7 – DILM12
DILMP20
130 – 240
24 – 48
A1
DILM17 – DILM32
A2
130 – 240
24 – 48
DILM40 – DILM95
130 – 240
DILM12-XSPVL48
281220
DILM12-XSPVL240
281221
DILM32-XSPVL48
281222
DILM32-XSPVL240
281223
DILM95-XSPVL48
281224
DILM95-XSPVL240
281225
See
green
pages
Voltage Indicator
DILM12-XSPI48
285251
DILM12-XSPI130
285252
130 – 250
DILM12-XSPI250
285253
24 – 48
DILM32-XSPI48
285254
DILM32-XSPI130
285255
DILM32-XSPI250
285256
DILM150-XSPI48
285257
DILM150-XSPI130
285258
DILM150-XSPI250
285259
24 – 48
DILM7 – DILM12
DILMP20
48 – 130
Indicates presence of control
voltage.
For AC operated Contactors
(50-60 Hz).
48 – 130
A1
DILM17 – DILM32
A2
130 – 250
24 – 48
48 – 130
DILM40 – DILM150
130 – 250
See
green
pages
Connectors
Connector
Notes
For use with...
Article
Number
V0DILE
026634
DILM7 – DILM65
DILM32-XVB
281227
DILM80 – DILM150
DILM150-XVB
281226
DILEM
Provides a mechanical link when coupling two contactors together.
Distance between Contactors = 0 mm
Type
Price
See green
pages
➊RC Suppressor and Varistor Suppressor cannot be used at the same time.
For Sales and Support call KMparts.com (866) 595-9616
19
Accessories
DILEM & DILM Contactors
Mechanical Interlocks
Mechanical Interlocks
Notes
For use with...
For two contactors with AC or DC operated magnet systems.
Distance between Contactors = 0 mm.
Mechanical Lifespan = 2.5 x 106 operations.
Additional auxiliary contact modules can be fitted.
Type
Article
Number
MVDILE
010113
DILM7 – DILM12
DILMP20
DILM12-XMV
281196
DILM17 –DILM32
DILM32-XMV
281197
DILM40 – DILM65
DILM65-XMV
281198
DILM80 – DILM150
DILM150-XMV
240081
For two contactors with the same or different magnetic systems.
Mechanical lifespan 5 x 106 operations. No auxiliary contact is possible
between the mechnical interlock and contactor.
Combination with same frame size only.
Distance between contactors: 15 mm
DILM185 – DILM500
DILM500-XMV
208289
For two contactors with the same or different magnetic systems.
Mechanical lifespan 5 x 106 operations. No auxiliary contact is possible
between the mechnical interlock and contactor.
DILM820-XMV consists of interlock element and mounting support plate.
DILM580 – DILM1000 DILM820-XMV
208288
DILEM
For two contactors with AC or DC operated magnet systems.
Distance between Contactors = 0 mm.
Mechanical Lifespan = 2.5 x 106 operations.
Additional auxiliary contact modules can be fitted.
Price
See
green
pages
Reversing Kits
Reversing Kits
Notes
For use with...
Type
Article
Number
Price
Consisting of one 3-pole paralleling link with control bridge and reversing link
with A2 bridge.
DILEM
(+MVDILEM)
MVS-WB-EM
220209
See green
pages
DILM7/9/12 mains
DILM7/9/12 delta
DILM7/9/12 star
DILM12-XRL
283108
DILM17/25/32 mains
DILM17/25/32 delta
DILM17/25/32 star
DILM32-XRL
In addition to the electrical interlock, the following control connections are
integrated:
• K1M: A1 – K2M: 21
• K1M: 21 – K2M: A1
• K1M: A2 – K2M: A1
20
See
green
pages
For Sales and Support call KMparts.com (866) 595-9616
283109
Accessories
DILEM & DILM Contactors
Star-Delta Wiring Kits
Star-Delta Wiring Kit
Notes
Type
Article
Number
DILM7/9/12 mains
DILM7/9/12 delta
DILM7/9/12 star
DILM12-XSL
283130
DILM17/25/32 mains
DILM17/25/32 delta
DILM17/25/32 star
DILM32-XSL
283131
Type
Article
Number
For use with...
The following control cables are integrated in addition to
electrical interlock:
• K3M: A1 – K5M: 21
• K3M: 21 – K5M: A1
• K3M: A2 – K5M: A1
Price
See
green
pages
Bridges
Bridges
Notes
For use with...
Price
Star-Point Bridges
S1DILEM
220218
DILM7 – DILM12
DILM12-XS1
281190
DILM17 – DILM32
DILM32-XS1
281191
DILM40 – DILM65
DILM65-XS1
281192
DILM185 – DILM400
DILM400-XS1
208291
DILM500
DILM500-XS1
208290
P1DILEM
019095
DILM12-XP1
281193
DILEM
Finger-safe (in accordance with IEC 536).
See green
pages
A cover is included for protection against accidental contact.
Paralleling Bridges (Consisting of two paralleling links)
4th pole can be broken off.
AC-1 current carrying capacity of the open contactor increases by a factor of
2.5.
Protected against accidental contact (in accordance with IEC 536).
DILEM
DILM7 – DILM12
4th pole can be broken off.
AC-1 current carrying capacity of the open contactor increases by a factor of
2.5.
Protected against accidental contact (in accordance with IEC 536).
Terminal capacity can be found in the Technical Data section.
3-pole
AC-1 current carrying capacity of the open Contactor increases by a factor of
2.5.
A cover is included for protection against accidental contact.
See green
pages
DILM17 – DILM32
DILM32-XP1
281194
DILM40 – DILM65
DILM65-XP1
281195
DILM185
DILM185-XP1
208292
For Sales and Support call KMparts.com (866) 595-9616
21
Accessories
DILEM & DILM Contactors
Connection Tabs
For Fast-On Connectors
Notes
For use with...
1 x 6.3 x 0.8 or 2 x 2.8 x 0.8 mm
For auxiliary contact and coil connections.
Use connectors with insulated sleeves.
Standard quantity: 100
Must be ordered in standard quantity.
Type
DILEM
DILM185 –
DILM1000
BT483
DILM185 –
DILM1000
BT2571
Article
Number
Price
059904
See
green
pages
062276
Terminal Blocks and Kits
Terminal Blocks & Kits
Notes
For use with...
Type
Article
Number
Price
Cable Terminal Blocks
DILM185
DILM225
DILM225-XKU-S
208294
DILM250 – DILM400
DILM400-XKU-S
208293
Consists of three individual terminals (Cu, Al), with integrated control circuit
terminal. Terminal cover included.
Terminal capacity: 2 X (AWG4 to MCM500)
DILM500/22
DILM500-XK-CNA
232192
Consists of three individual terminals (Cu, Al), with integrated control circuit
terminal. Terminal cover included.
Terminal capacity: 2 X (AWG2 to MCM500)
DILM580/22
DILM650/22
DILM650-XK-CNA
232193
Consists of three individual terminals (Cu, Al).
Terminal capacity: 4 X (AWG2 to MCM500)
DILM750/22
DILM820/22
DILM820-XK-CNA
232194
DILM500 – DILM650
DILM650-XKB-S
208296
DILM750
DILM820
DILM820-XKB-S
208295
See
green
pages
Article
Number
Price
For cable connection. Single or double cables may be connected.
See Technical Data for terminal capacity.
See
green
pages
Flat Strip Conductor Terminal Kit (with Control Circuit Terminal consisting of 3 Flat Strip Conductor Terminals)
For bus and flexibus connection.
See Technical Data for terminal capacity.
Covers
Covers
Notes
For use with...
Type
Sealable Shrouds
Cover snap-mounts onto the device and can be sealed to prevent tampering.
HDILE
010482
DILM185 – DILM400
DILM400-XHB
208287
DILM500
DILM500-XHB
208286
DILM580 – DILM650
DILM650-XHB
208285
DILM750 – DILM1000 DILM820-XHB
208284
DILEM
See
green
pages
Terminal Cover
Protection against shock hazards and accidental contact.
22
For Sales and Support call KMparts.com (866) 595-9616
See
green
pages
Alternate Coil Voltages
AC
DILM7 – DILM150 Contactors
Standard AC Coil Voltages
42V 50HZ
48V 60HZ
24V 60HZ
110V 50HZ
120V 60HZ
208V 60HZ
230V 50HZ
240V 60HZ
415V 50HZ
480V 60HZ
600V 60HZ
Special Order
Voltages
12 – 600V
50 - 60 Hz
Complete the Type Number by adding the following voltage suffix
Type
…(24V 60HZ)
…(48V 60HZ) …(120V 60HZ) …(208V 60HZ) …(240V 60HZ) …(480V 60HZ) …(600V 60HZ)
276581
276582
276579
276585
276588
276580
DILM7-10...
276541
276546
276547
276544
276550
276553
276545
DILM9-01...
276716
276721
276722
276719
276725
276728
276720
DILM9-10...
276681
276686
276687
276684
276690
276693
276685
DILM12-01...
276856
276861
276862
276859
276865
276868
276860
DILM12-10...
276821
276826
276827
276824
276830
276833
276825
DILMP20...
276961
276966
276967
276964
276970
276973
276965
DILM17-01...
277027
277032
277033
277030
277036
277039
277031
DILM17-10..
276995
277000
277001
276998
277004
277007
276999
DILM25-01...
277155
277160
277161
277158
277164
277167
277159
DILM25-10...
277123
277128
277129
277126
277132
277135
277127
DILM32-01...
277283
277288
277289
277286
277292
277295
277287
DILM32-10...
277251
277256
277257
277254
277260
277263
277255
DILM40...
277757
277762
277763
277760
277766
277769
277761
DILM50...
277821
277826
277827
277824
277830
277833
277825
DILM65...
277885
277890
277891
277888
277894
277897
277889
DILM80...
239377
239394
239399
239384
239402
239405
239389
DILM95...
239471
239476
239477
239474
239480
239483
239475
24V
50/60HZ
42 – 48V
50 – 60HZ
Price
Any coil voltage between 12 and 600V available by special order.
Contact your Moeller representative for information.
DILM7-01...
276576
See
green
pages
Standard AC Voltages
110 – 120V
50 – 60HZ
190 – 240V
50 – 60HZ
380 – 440V
50 – 60HZ
480 – 500V
50 – 60HZ
Complete the Type Number by adding the following voltage suffix
…(RAC 24)
…(RAC 48)
…(RAC 120)
…(RAC 240)
…(RAC 440)
…(RAC 500)
Price
DILM115...
Type
239545
239546
239547
239548
239549
239550
DILM150...
239585
239586
239587
239588
239589
239590
See
green
pages
Note: Other standard coil voltages available. Contact your Moeller representative.
Ordering Instructions
All Moeller AC contactors are cataloged with a standard 120V, 60Hz coil.
To order a contactor with an alternative coil voltage:
★Select a properly sized contactor from pages 6 & 9.
★Return to this page and locate the contactor in the tables above. Example: DILM7-01…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DILM7-01(24V 60Hz).
★Note the Article Number for the completed contactor:
DILM7-01(24V 60Hz) = 276576
★Order using both the Type Number and the Article Number.
For Sales and Support call KMparts.com (866) 595-9616
23
Alternate Coil Voltages
AC & DC
DILM185 – DILM1000 Contactors
Standard Coil Voltages
48 – 110V AC; 40-60Hz
48 - 110V DC
24 - 48V DC
110 – 250V AC; 40-60Hz
110 - 250V DC
250 – 500V AC: 40-60Hz
Complete the Type Number by adding the following voltage suffix
…(RDC48)
…(RA110)
…(RA250)
…(RAC500)
DILM185/22...
Type
208191
208192
208193
208194
DILM225/22...
208195
208196
208197
208198
DILM250/22...
208199
208200
208201
208202
DILM300/22...
208203
208204
208205
208206
DILM400/22...
208207
208208
208209
208210
DILM500/22...
208211
208212
208213
208214
DILM580/22...
–
208215
208216
208217
DILM650/22...
–
208218
208219
208220
DILM750/22...
–
208221
208222
208223
DILM820/22...
–
208224
208225
208226
DILM1000/22...
–
267213
267214
271990
Ordering Instructions
All large horsepower contactors are cataloged with a standard wide range
electronic coil, good for both AC and DC applications. To order a contactor
with an alternative coil voltage:
★Select a properly sized contactor from page 8.
★Return to this page and locate the contactor in the tables above. Example: DILM185/22…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DILM185/22(RDC 48).
★Note the Article Number for the completed contactor:
DILM185/22(RDC48) = 208191
★Order using both the Type Number and the Article Number.
24
For Sales and Support call KMparts.com (866) 595-9616
Price
See
green
pages
Alternate Coil Voltages
DC
DILM7 – DILM150 Contactors
Special Order
Voltages
Standard DC Coil Voltages
24V DC
48V DC
24 - 27V DC
48 - 60V DC
110 - 130V DC
200 - 240V DC
12 – 250V DC
Complete the Type Number by adding the following voltage suffix
Type
…(48VDC)
…(RDC24)
…(RDC60)
…(RDC130)
…(RDC240)
276600
276601
–
–
–
–
Price
DILM7-10...
276565
276566
–
–
–
–
DILM9-01...
276740
276741
–
–
–
–
DILM9-10...
276705
276706
–
–
–
–
DILM12-01...
276880
276881
–
–
–
–
DILM12-10...
276845
276846
–
–
–
–
DILMP20...
276985
276986
–
–
–
–
DILM17-01...
–
–
277050
277051
277052
277053
–
DILM17-10..
–
–
277018
277019
277020
277021
–
DILM25-01...
–
–
277178
277179
277180
277181
–
DILM25-10...
–
–
277146
277147
277148
277149
–
DILM32-01...
–
–
277306
277307
277308
277309
–
DILM32-10...
–
–
277274
277275
277276
277277
–
DILM40...
–
–
277780
277781
277782
277783
–
DILM50...
–
–
277844
277845
277846
277847
–
DILM65...
–
–
277908
277909
277910
277911
–
DILM80...
–
–
239416
239417
239418
239419
–
DILM95...
–
–
239510
239511
239512
239513
–
DILM115...
–
–
239555
239560
239567
239572
–
DILM150...
–
–
239591
239592
239593
239594
–
Any coil voltage between 12 and
250V available by special order.
Contact your Moeller
representative for information.
…(24VDC)
DILM7-01...
See
green
pages
Note: Other standard coil voltages available. Contact your Moeller representative.
Ordering Instructions
All Moeller DC contactors are cataloged with a standard 24V coil. To order
a contactor with an alternative coil voltage:
★Select a properly sized contactor from pages 7 & 9.
★Return to this page and locate the contactor in the tables above. Example: DILM7-01…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DILM7-01(48V DC).
★Note the Article Number for the completed contactor:
DILM7-01(24V 60Hz) = 276600
★Order using both the Type Number and the Article Number.
For Sales and Support call KMparts.com (866) 595-9616
25
Alternate Coil Voltages
AC & DC
DILEM Miniature Contactors
Standard AC Coil Voltages
24V 60HZ
Type
…(24V 60HZ)
42V 50HZ
110V 50HZ
230V 50HZ
415V 50HZ
48V 60HZ
120V 60HZ
208V 60HZ
240V 60HZ
480V 60HZ
Complete the Type Number by adding the following voltage suffix.
600V 60HZ
…(48V 60HZ) …(120V 60HZ) …(208V 60HZ) …(240V 60HZ) …(480V 60HZ) …(600V 60HZ)
DILEM-10...
010006
051782
051783
210256
051786
051789
010197
DILEM-01...
010134
051791
051792
227914
051795
051798
010327
DILEM4...
014776
051800
051801
–
051804
051807
–
110V DC
220V DC
Note: Other standard coil voltages available. Contact your Moeller representative.
Standard DC Coil Voltages
12V DC
24V DC
48V DC
60V DC
Complete the Type Number by adding the following voltage suffix
…(12VDC)
…(24VDC)
…(48VDC)
…(60VDC)
…(110VDC)
…(220VDC)
DILEM-10-G...
079594
010213
010245
010293
010309
010325
DILEM-01-G...
079642
010343
010496
010040
010136
010168
DILEM4-G...
079680
012701
012811
012844
013166
013194
Type
Price
See
green
pages
Note: Other standard coil voltages available. Contact your Moeller representative.
Ordering Instructions
All Moeller AC contactors are cataloged with a standard 120V 60Hz coil.
All DC contactors are cataloged with a standard 24V coil. To order a contactor with an alternative coil voltage:
★Select a properly sized contactor from page 10.
★Return to this page and locate the contactor in the tables above. Example: DILEM-10…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DILEM-10(24V 60Hz).
★Note the Article Number for the completed contactor:
DILEM-10(24V 60Hz) = 010006
★Order using both the Type Number and the Article Number.
26
For Sales and Support call KMparts.com (866) 595-9616
Price
See
green
pages
Alternate Coil Voltages
AC
Contactors for Three-Phase Capacitors
Standard AC Coil Voltages
42V 50HZ
110V 50HZ
230V 50HZ
415V 50HZ
24V 60HZ
48V 60HZ
120V 60HZ
240V 60HZ
480V 60HZ
Complete the Type Number by adding the following voltage suffix
Type
…(24V 60HZ)
…(48V 60HZ) …(120V 60HZ) …(240V 60HZ) …(480V 60HZ)
DIL00MK-11...
059794
047019
047020
047023
047026
DIL00MK-02...
076733
047030
047031
047034
047037
DIL0MK-10...
017083
047041
047042
047045
047048
DIL1MK-10...
081154
047051
047052
047055
047058
DIL2MK-10...
040814
047061
047062
047065
047068
DIL3MK72/22...
209971
209973
209974
209977
209980
Price
See
green
pages
Note: Other standard coil voltages available. Contact your Moeller representative.
Ordering Instructions
All Moeller AC contactors are cataloged with a standard 120V 60Hz coil. To
order a contactor with an alternative coil voltage:
★Select a properly sized contactor from pages 13 & 14.
★Return to this page and locate the contactor in the tables above. Example: DIL00MK-11…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DIL00MK-11(24V 60Hz).
★Note the Article Number for the completed contactor:
DIL00MK-11(24V 60Hz) = 059794
★Order using both the Type Number and the Article Number.
For Sales and Support call KMparts.com (866) 595-9616
27
Alternate Coil Voltages
AC
Reversing Contactor Combinations
Special Order
Voltages
Standard AC Coil Voltages
24V 60HZ
Type
…(24V 60HZ)
42V 50HZ
110V 50HZ
230V 50HZ
48V 60HZ
120V 60HZ
208V 60HZ
240V 60HZ
Complete the Type Number by adding the following voltage suffix
415V 50HZ
480V 60HZ
12 – 600V
50 - 60 Hz
…(48V 60HZ) …(120V 60HZ) …(208V 60HZ) …(240V 60HZ) …(480V 60HZ)
278057
278058
283351
278061
278064
DIULM9/21…
278079
278082
278083
283353
278086
278089
DIULM12/21…
278104
278107
278108
283355
278111
278114
DIULM17/21…
278129
278132
278133
283357
278136
278139
DIULM25/21…
278154
278157
278158
283359
278161
278164
DIULM32/21…
278179
278182
278183
283361
278186
278189
DIULM40/11…
278204
278207
278208
283362
278211
278214
DIULM50/11…
278229
278232
278233
283363
278236
278239
DIULM65/11…
278254
278257
278258
283364
278261
278264
Price
Any coil voltage between 12 and 600V
available by special order.
Contact your Moeller representative
for information.
DIULM7/21…
278054
Note: Other standard coil voltages available. Contact your Moeller representative.
Ordering Instructions
All Moeller AC contactors are cataloged with a standard 120V 60Hz coil. To
order a contactor with an alternative coil voltage:
★Select a properly sized contactor from page 12.
★Return to this page and locate the contactor in the tables above. Example: DIULM7/21…
★Select the desired alternative coil voltage along the top of the chart and complete the “Type” Number. Example: DIULM7/21(24V 60Hz).
★Note the Article Number for the completed contactor:
DIULM7/21(24V 60Hz) = 278054
★Order using both the Type Number and the Article Number.
28
For Sales and Support call KMparts.com (866) 595-9616
See
green
pages
Replacement Coils
AC & Electronic Modules AC/DC
DILM Individual Coils
AC Coil Voltage Suffix
(Numbers in bold indicate
standard coil voltages)
For Use With Contactor…
DILEM…
–
–
–
DILM7 – 12
DILM17 – 32
DILM40 – 65
DILM80 – 150
DIULM7 – 12
DIULM17 – 32
DIULM40 – 65
–
DILMP20
–
–
–
Complete the Type Number below by adding the voltage suffix
–
DILM32-XSP…
DILM65-XSP…
…(24V 50HZ)
281130
281160
…(48V 50HZ)
281131
281161
…(240V 50HZ)
281132
281162
…(500V 50HZ)
281133
281163
…(24V 60HZ)
281134
281164
…(110V 60HZ)
281135
281165
…(115V 60HZ)
281136
281166
…(208V 60HZ)
283377
283379
…(600V 60HZ)
283378
283380
…(42V 50HZ, 48V 60HZ)
281137
281167
…(110V 50HZ, 120V 60HZ)
281138
281168
281139
281169
281140
281170
…(230V 50HZ, 240V 60HZ)
281141
281171
…(380V 50HZ, 440V 60HZ)
281142
281172
…(400V 50HZ, 440V 60HZ)
281143
281173
…(415V 50HZ, 480V 60HZ)
281144
281174
…(24V 50/60HZ)
281145
281175
…(42V 50/60HZ)
281146
281176
…(110V 50/60HZ)
281147
281177
…(220V 50/60HZ)
281148
281178
…(230V 50/60HZ)
281149
281179
…(380V 50/60HZ)
281150
281180
…(190V 50HZ, 220V 60HZ)
…(220V 50HZ, 240V 60HZ)
Cannot
replace coil
Price
DILM150-XSP…
Product available
Fall 2005.
Contact your
Moeller
representative.
See green pages
DILM185 to 1000 Contactors (Electronic Modules including coil)
For Use With Contactor…
DILM185 – 250
AC & DC Coil Voltages
Voltage
Suffix
DILM300 – 500
DILM580 – 820
DILM1000
Complete the Type Number below by adding the voltage suffix
DILM250-XSP/E…
DILM500-XSP/E…
DILM820-XSP/E…
DILM1000-XSP/E…
24V – 48V DC
…RDC 48
208250
208254
–
–
48 – 110V AC; 40-60HZ
48 – 110V DC
110 – 250V AC; 40-60HZ
110 – 250V DC
…RA 110
208251
208255
208258
289146
…RA 250
208252
208256
208259
289145
250 – 500V AC; 40-60HZ
…RAC 500
208253
208257
208260
289147
Price
See green pages
For Sales and Support call KMparts.com (866) 595-9616
29
Replacement Coils
DC
DILM Individual Coils
For Use With Contactor…
DC Coil Voltags
Voltage Suffix
24 – 27V DC
…(RDC24)
48 – 60V DC
…(RDC60)
110 – 130V DC
…(RDC130)
200 – 240V DC
…(RDC240)
Price
30
DILEM…-G
–
–
–
DILM7 – 12
DILM17 – 32
DILM40 – 65
DILM80 – 150
DILMP20
–
–
–
Complete the Type Number below by adding the voltage suffix
–
DILM32-XSP…
DILM65-XSP…
DILM150-XSP…
Cannot
replace coil
281155
281185
281156
281186
281157
281187
281158
281188
Product available
Fall 2005.
Contact your
Moeller
representative.
See green pages
For Sales and Support call KMparts.com (866) 595-9616
Contactors
Notes
For Sales and Support call KMparts.com (866) 595-9616
31
Travel Diagrams
DILEM to DILM1000 Contactors
Travel Diagrams for Contactors
The diagrams show the closing and opening of the auxiliary contacts of contactors and modules at no-load. Tolerances are
not taken into consideration.
DILM7/9/12...AC
DILM7/9...DC
Normally Open
Normally Open
0
3.3
Normally Closed
0
DILM17/25/32
4.5
1.0
0
Normally Open
3.2
6.0
0
Normally Closed
0
3.3
4.4
4.4
1.0
DILEM...DC
Normally Open
Normally Open
5.1
7.5
0
0
DILEM...AC
1.91 2.85
0
0.95
2.85
Normally Open
0
1.89 2.78
Normally Closed
0
3.2
6.0
0.95
2.78
DILA-XHI... with DILM7.../DILM9...DC
DILA-XHI... with DILMP20.../
Normally Open
Normally Open
0
1.6
Normally Closed
0
Normally Closed
2.4
Normally Open
2.9
0.7
0
4.2
DILM32-XHI...
2.1 2.9
DILM40/50/65
1.8
Normally Closed
Normally Open
0
4.5
Normally Closed
DILM(P)(20)12-...DC
2.3 2.9
Normally Closed
0
3.2
4.4
Normally Closed
0
0
2.9
0.7
4.4
1.6
1.6
DILA-XHI... with DILM7/9/12-...AC
DILA-XHIV... with DILM7.../DILM9...DC
Normally Open
Normally Open
0
3.2
Normally Closed
Normally Open
0
2.0
1.9
2.8
2.8
0
6
6
1.6
0
4.1
7.5
Normally Closed
0
4.2
7.5
1.6
6
Normally Closed
0
6.0 7.5
Normally Closed
4.4
Normally Open
0
Normally Open
0
2.8
Normally Open
DILM150-XHIV...
Normally Open
4.4
DILA-XHIV... with DILM17 to DILM32...AC/DC
4.5
DILM150-XHI...
0
2.9
Normally Closed
0
2.0
DILA-XHI... with DILM17...to DILM32...AC/DC
4.5
Normally Closed
0
2.9
Normally Closed
0
4.5
1.6
DILA-XHIV... with DILM7/9/12-...AC
32
1.2
Normally Closed
0
Normally Open
0
4.5
DILA-XHIV... with DILMP20.../DILM12...DC
0
5.7 7.5
For Sales and Support call KMparts.com (866) 595-9616
0
3.2
6
Travel Diagrams
DILEM to DILM1000 Contactors
Travel Diagrams for Contactors (continued)
DILM1000-XHI...
DILM1000-XHIV...
Normally Open
Normally Open
0
5.45 7.5
Normally Closed
0
4.1
7.5
Normally Closed
0
0
7.5
3.6
4.95 7.5
DILM185/225/250
DILM185/225/250 + DILM1000-XHI11
DILM185/225/250 + DILM1000-XHI11V-SI
Normally Open
Normally Open
Normally Open
0
10.1 13.1
0
Normally Closed
10.25 13.1
0
8.4
13.1
0
Normally Closed
8.7
13.1
9.75 13.1
0
DILM300/400/500
DILM300/400/500 + DILM1000-XHI11
DILM300/400/500 + DILM1000-XHI11V-SI
Normally Open
Normally Open
Normally Open
0
8.9
0
13.1
Normally Closed
10.25 13.1
0
8.4
DILM580/650
DILM580/650 + DILM1000-XHI11
Normally Open
Normally Open
0
2.0
Normally Closed
DILM750/820/1000
2.0
0
9.75 13.1
0
0
10.5
10.5
5.5
Normally Closed
6.0
0
6.8
10.5
10.5
DILM750/820/1000 + DILM1000-XHI11V-SI
Normally Open
0
4.1
Normally Closed
7.4
Normally Open
0
13.1
DILM580/650 + DILM1000-XHI11V-SI
DILM750/820/1000 + DILM1000-XHI11
Normally Open
Normally Closed
8.7
Normally Open
0
4.1
13.1
0
7.4
0
5.5
0
10.5
10.5
Normally Closed
For Sales and Support call KMparts.com (866) 595-9616
6.0
0
6.8
10.5
10.5
33
Utilization Curves
DILM Contactors
Rated output of three-phase motors 50 – 60 Hz
kW
75
55
45
37
30
22
18.5
15
Rated operational current Ie 50 – 60 Hz
AC-3 Normal Switching Duty (DILM7 to DILM65)
A
65
25
7.5
18
5.5
12
4
9
3
7
Electrical Characteristics:
Make:
up to 6 x rated motor current
up to 1 x rated motor current
Break:
DILM50
DILM40
32
11
Operating Characteristics:
Starting: from rest
Stopping: after attaining full running speed
DILM65
50
40
Squirrel-Cage Motors
AC-3/400 V
Utilization Category:
100% AC-3
DILM32
DILM25
Typical Applications:
Compressors
Pumps
Fans
Hinged Flaps/Valves
Mixers
Centrifuges
DILM17
DILM12
DILM9
DILM7
Elevators
Escalators
Conveyor Belts
Bucket-elevators
Agitators
Air-conditioning Systems
General drives in manufacturing and processing machines
0.01
0.02
0.04 0.06 0.1
0.2
0.4 0.6
1
2
4
6
10
Component lifespan [millions of operations]
Rated output of three-phase motors 50 – 60 Hz
kW
6
4.5
4
Rated operational current Ie 50 – 60 Hz
AC-4 Extreme Switching Duty (DILM7 to DILM65)
A
Squirrel-Cage Motors
AC-4/400 V
Operating Characteristics:
Jogging, plugging, reversing
Electrical Characteristics:
Make:
up to 6 x rated motor current
up to 6 x rated motor current
Break:
25
DILM65
21
18
15
13
DILM50
DILM40
DILM32
DILM25
10
DILM17
7
6
DILM12
DILM9
5
DILM7
2.2
2.2
1.5
Utilization Category:
100% AC-4
Typical Applications:
Printing Presses
Wire Drawing Machines
Centrifuges
Special drives for manufacturing and processing machines
4
3
2
0.01
0.02
0.04 0.06 0.1
0.2
0.4 0.6
1
2
4
6
10
NOTE: Data for DILM80-DILM150 is pending. Contact your
Moeller representative for details.
Component lifespan [millions of operations]
34
For Sales and Support call KMparts.com (866) 595-9616
Utilization Curves
DILM Contactors
kW
560
450
400
355
315
250
200
160
132
110
Rated operational current Ie 50 – 60 Hz
Rated output of three-phase motors 50 – 60 Hz
AC-3 Normal Switching Duty (DILM185 to DILM1000)
90
A
1000 DILM1000
Squirrel-Cage Motors
AC-3/400 V
Operating Characteristics:
Starting: from rest
Stopping: after attaining full running speed
820 DILM820
750 DILM750
650 DILM650
580 DILM580
Electrical Characteristics:
Make:
up to 6 x rated motor current
up to 1 x rated motor current
Break:
500 DILM500
400 DILM400
300 DILM300
250 DILM250
225 DILM225
Utilization Category:
100% AC-3
185 DILM185
75
145
55
104
45
85
37
72
30
58
22
43
18.5
36
15
30
11
7.5
23
16
Typical Applications:
Compressors
Pumps
Fans
Hinged Flaps
Air-conditioning S
Agitators
Elevators
Escalators
Conveyor Belts
Bucket Elevators
ystems Mixers
Centrifuges
General drives in manufacturing and processing
machines
0.01
0.02
0.04 0.06 0.1
0.2
0.4 0.6 0.75 1
2
4 5 6
3
8 10
Component lifespan [millions of operations]
kW
355
315
280
250
200
160
132
110
Rated operational current Ie 50 – 60 Hz
Rated output of three-phase motors 50 – 60 Hz
AC-4 Extreme Switching Duty (DILM185 to DILM820)
Squirrel-Cage Motors
AC-4/400 V
A
Operating Characteristics:
Jogging, plugging, reversing
656 DILM820
576
512
456
360
DILM750
DILM650
DILM580
DILM500
Electrical Characteristics:
Make:
up to 6 x rated motor current
up to 6 x rated motor current
Break:
296 DILM400
Utilitzation Category:
100% AC-4
240 DILM300
200 DILM250
90
75
164 DILM225
140 DILM185
55
104
45
37
85
72
30
58
22
18.5
43
36
15
30
11
23
7.5
16
5.5
12
4
8.8
3
6.5
2.2
5
1.5
3.5
Typical Applications:
Printing Presses
Centrifuges
Wire Drawing
Special drives for manufacturing and processing
machines
0.01
0.02 0.03 0.04 0.06 0.1
0.2 0.3 0.4 0.6
1
2
3
4 5 6
8 10
Component lifespan [millions of operations]
For Sales and Support call KMparts.com (866) 595-9616
35
Utilization Curves
DIL Contactors
Breaking current A
AC-1 Switching Duty for Non-Motor Loads (DILEM to DILM1000)
500
400
350
300
275
3-pole, 4-pole
AC-1/400 V
1000 DILM820/1000
900850 DILM650DILM750
800
DILM580
700 DILM500
Operating Characteristics:
Non-inductive or slightly inductive loads
DILM400
DILM300
DILM250
DILM225
DILM185
Electrical Characteristics:
Make:
1 x rated current
1 x rated current
Break:
160
Utilization Category:
100% AC-1
100
90
Typical Applications:
Electrical heaters
55
35
DILEM
20
10
7
5
4
3
2
1
0.1
0.2
0.3
0.5
0.7
1
2
3
5
7
10
Component lifespan [Millions of operations]
36
For Sales and Support call KMparts.com (866) 595-9616
Utilization Curves
DIL Contactors
Short-Time Loading (DILM185 to DILM1000)
Short-time
current
A
10000
8000
6000
5000
4000
AC-1/400 V
DILM820 DILM1000
DILM750
DILM650
DILM580
3-pole
Time interval between two loading cycles: 15 minutes
DILM500
DILM400
DILM300
3000
DILM250
2500
2000
1800
1500
DILM185/225
1100
1000
700
500
400
300
200
Seconds
2
3
5
7
10
20
Duration of load
30
50 70 100
1 min
200 300
3 min 5 min
500 700 900
10 min15 min
For Sales and Support call KMparts.com (866) 595-9616
37
Technical Data
DILM7 – DILM150 Contactors
General
Standards
UL, CSA, IEC/EN 60947, VDE 0660
Lifespan, mechanical
AC operated
DC operated
Operating frequency, mechanical
AC operated
DC operated
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Open
Ops
Ops
[x 106]
[x 106]
Ops/h
Ops/h
Enclosed
DILM9
DILM12
DILM17
DILM25
DILM32
10
10
10
10
10
10
10
10
10
10
10
10
9000
9000
9000
9000
9000
9000
5000
5000
5000
5000
5000
5000
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
Flexible with ferrule
[mm2]
Stranded
[mm2]
Solid or stranded
Flat conductor
Number of segments x width x thickness
[AWG]
[mm]
38
°
30˚
180°
30˚
180°
Mechanical shock resistance (IEC/EN 60068-2-27)
Half-sinusoidal shock 10 ms
Main
Make
[g]
Auxiliary
Make
[g]
Break
[g]
Degree of protection
Protection against direct contact when actuated from front (IEC 536)
Finger- and back-of-hand proof
Weight
AC
[kg]
DC
[kg]
Screw connector terminals
1 or 2 conductors can be connected
Main cable cross-section
Solid
[mm2]
°
Mounting position
AC and DC
90
°
90
90
90
°
Storage
[°C ]
[°F]
[°C ]
[°F]
[°C ]
[°F]
DILM7
10
7
5
IP20
10
7
5
IP20
10
7
5
IP20
10
7
5
IP00
10
7
5
IP00
10
7
5
IP00
0.23
0.28
0.23
0.28
0.23
0.28
0.42
0.48
0.42
0.48
0.42
0.48
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
–
–
18 – 14
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
–
–
18 – 14
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
–
–
18 – 14
1 x (0.75–16)
2 x (0.75–10)
1 x (0.75–16)
2 x (0.75–10)
1 x 16
–
18 – 6
1 x (0.75–16)
2 x (0.75–10)
1 x (0.75–16)
2 x (0.75–10)
1 x 16
–
18 – 6
1 x (0.75–16)
2 x (0.75–10)
1 x (0.75–16)
2 x (0.75–10)
1 x 16
–
18 – 6
–
–
–
–
–
–
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM7 – DILM150 Contactors
DILM50
DILM65
10
10
10
10
10
10
5000
5000
5000
5000
5000
5000
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
-25/60° C
-13/140° F
-25/40° C
-13/104° F
-40/80° C
-40/176° F
DILM80
DILM95
DILM115
DILM150
˚
90
90
˚
DILM40
180˚
30˚
UL/CSA pending for DILM80 – DILM150.
Product available in Fall 2005. Contact your Moeller representative.
10
7
5
IP00
10
7
5
IP00
10
7
5
IP00
0.9
1.1
0.9
1.1
0.9
1.1
1 x (2.5–16)
2 x (2.5–16)
1 x (2.5–35)
2 x (2.5–25)
1 x (16 – 50)
2 x (16 – 35)
12 – 2
12 x
(6 x 9 x 0.8)
1 x (2.5–16)
2 x (2.5–16)
1 x (2.5–35)
2 x (2.5–25)
1 x (16 – 50)
2 x (16 – 35)
12 – 2
12 x
(6 x 9 x 0.8)
1 x (2.5–16)
2 x (2.5–16)
1 x (2.5–35)
2 x (2.5–25)
1 x (16 – 50)
2 x (16 – 35)
12 – 2
12 x
(6 x 9 x 0.8)
For Sales and Support call KMparts.com (866) 595-9616
39
Technical Data
DILM7 – DILM150 Contactors
General
Main cable connection screw/bolt
Tightening torque
Control circuit cable cross-sections
Solid
Flexible with ferrule
[Nm]
[mm2]
[mm2]
Solid or stranded
Control circuit cable connection screw/bolt
Tightening torque
Tools
Main cable Pozidriv screwdriver
Standard screwdriver
[AWG]
Control
Pozidriv screwdriver
circuit cable Standard screwdriver
[Size]
[mm]
[Nm]
[Size]
[mm]
Springloaded terminal connection (1 or 2 conductors can be connected)
Main cable cross-section
Solid
[mm2]
Flexible
[mm2]
Flexible with ferrule
[mm2]
Solid or stranded
[AWG]
Control circuit cable cross-sections
Solid
[mm2]
Flexible
[mm2]
Flexible with ferrule
[mm2]
Solid or stranded
[AWG]
Tools
Wire strip length
[mm]
Screwdriver blade width
[mm]
Main Contacts
Rated impulse withstand
Uimp [V AC]
Overvoltage category/pollution degree
Rated insulation
[V AC]
Ui
Rated operational
[V AC]
Ue
Safe isolation to VDE 0106 Part 101 and Part 101/A1
between coil and contacts
[V AC]
between the contacts
[V AC]
Making capacity cos φ to IEC/EN 60947 up to 609 V
[A]
Breaking capacity
220/230 V
[A]
380/400 V
[A]
500 V
[A]
660/690 V
[A]
1000 V
[A]
Component Lifespan
AC-1; 400 V
[x 106]
Ie
Maximum operating frequency AC-1; 400 V
[Ops/h]
Ie
AC-3; 400 V
[Ops/h]
Ie
AC-4; 400 V
[Ops/h]
Ie
Short-circuit rating
400 V
500 V
[A]
Short-circuit Type “2”
protection
690 V
690 V
[A]
max. fuse
1000 V 1000 V
[A]
Type “1”
400 V
500 V
[A]
690 V
690 V
[A]
1000 V 1000 V
[A]
40
DILM7
DILM9
DILM12
DILM17
DILM25
DILM32
M3.5
1.2
M3.5
1.2
M3.5
1.2
M5
3
M5
3
M5
3
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75–4.0)
2 x (0.75–2.5)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
–
–
–
–
–
–
–
–
–
–
–
–
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
10
3.5
8000
III/3
690
690
8000
III/3
690
690
8000
III/3
690
690
8000
III/3
690
690
8000
III/3
690
690
8000
III/3
690
690
400
400
112
70
70
50
40
–
1
800
1000
300
400
400
112
90
90
70
50
–
1
800
1000
300
400
400
144
120
120
100
70
–
1
800
1000
300
440
440
238
170
170
170
120
–
1
800
800
300
440
440
350
250
250
250
150
–
1
800
800
300
440
440
384
320
320
320
180
–
1
800
800
300
20
16
–
35
20
–
20
16
–
35
20
–
20
20
–
35
25
–
25
25
–
63
50
–
35
35
–
100
50
–
63
35
–
125
63
–
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM7 – DILM150 Contactors
DILM40
DILM50
DILM65
M6
3
M6
3
M6
3
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
1 x (0.75 – 4)
1 x (0.75 – 4)
1 x (0.75–2.5)
2 x (0.75–2.5)
18 – 14
M3.5
1.2
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
2
0.8 x 5.5
1x6
–
–
–
–
–
–
–
–
–
–
–
–
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
0.75 – 2.5
0.75 – 2.5
0.75 – 2.5
18 – 14
10
3.5
10
3.5
10
3.5
8000
III/3
690
690
8000
III/3
690
690
8000
III/3
690
690
440
440
560
400
400
400
250
–
1
800
800
300
440
440
700
500
500
500
320
–
1
800
800
300
440
440
910
650
650
650
370
–
1
800
800
300
63
50
–
125
80
–
80
63
–
160
80
–
125
80
–
250
100
–
DILM80
DILM95
DILM115
DILM150
UL/CSA pending for DILM80 – DILM150.
Product available in Fall 2005. Contact your Moeller representative.
For Sales and Support call KMparts.com (866) 595-9616
41
Technical Data
DILM7 – DILM150 Contactors
AC
AC-1 operation
Conventional free air Open
thermal current,
3-pole, 50 – 60 Hz
40° C
50° C
55° C
60° C
104° F
122° F
131° F
140° F
Enclosed
Conventional free air Open
thermal current,
Enclosed
1-pole
AC-3 operation
Rated operational current open, 220/230 V
50 – 60 Hz
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
Rated power
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
AC-4 operation
Rated operational current open, 220/230 V
50 – 60 Hz
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
Rated power
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
DC
Rated operational current, open
DC-1 operation
60 V
110 V
220 V
440 V
DC-3 operation
60 V
110 V
220 V
440 V
DC-5 operation
60 V
110 V
220 V
440 V
42
DILM7
DILM9
DILM12
DILM17
DILM25
DILM32
Ith
Ith
Ith
Ith
Ith
Ith
[A]
[A]
[A]
[A]
[A]
22
21
21
20
18
22
21
21
20
18
22
21
21
20
18
40
38
37
35
32
45
43
42
40
36
45
43
42
40
36
[A]
50
50
50
85
85
85
Ith
[A]
45
45
45
80
80
80
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Pn
Pn
Pn
Pn
Pn
Pn
Pn
Pn
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
7
7
7
7
7
5
4
–
2.2
2.2
3
4
4.5
3.5
3.5
–
9
9
9
9
9
7
5
–
2.5
3
4
5.5
5.5
4.5
4.5
–
12
12
12
12
12
10
7
–
3.5
4
5.5
7
7.5
7
6.5
–
18
18
18
18
18
18
12
–
5
5.5
7.5
10
10.5
12
11
–
25
25
25
25
25
25
15
–
7.5
8.5
11
14.5
15.5
17.5
14
–
32
32
32
32
32
32
18
–
10
11
15
19
20
23
17
–
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Pn
Pn
Pn
Pn
Pn
Pn
Pn
Pn
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
5
5
5
5
5
4.5
4
–
1
1.5
2.2
2.3
2.4
2.5
2.9
–
6
6
6
6
6
5
4.5
–
1.5
1.6
2.5
2.8
3
2.8
3.6
–
7
7
7
7
7
6
5
–
2
2.2
3
3.4
3.6
3.5
4.4
–
10
10
10
10
10
10
8
–
2.5
3
4.5
5
5.5
6
6.5
–
13
13
13
13
13
13
10
–
3.5
4
6
6.5
7
8
8.5
–
15
15
15
15
15
15
12
–
4
4.5
7
7.5
8
9
10
–
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
20
20
15
1
20
20
1.5
0.2
20
20
1.5
0.2
20
20
15
1.3
20
20
1.5
0.2
20
20
1.5
0.2
20
20
15
1.3
20
20
1.5
0.2
20
20
1.5
0.2
35
35
35
2.9
35
35
10
0.6
35
35
10
0.6
40
40
40
2.9
35
35
10
0.6
35
35
10
0.6
40
40
40
2.9
40
40
25
0.6
40
40
25
0.6
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM7 – DILM150 Contactors
DILM40
DILM50
DILM65
60
57
55
50
45
70
65
63
60
54
85
80
75
72
65
125
150
180
112
135
162
40
40
40
40
40
40
25
–
12.5
13.5
18.5
24
25
28
23
–
50
50
50
50
50
50
32
–
15.5
17
22
30
32
36
30
–
65
65
65
65
65
65
37
–
20
22
30
39
41
47
35
–
18
18
18
18
18
18
14
–
5
5.5
9
9.5
10
11
12
–
21
21
21
21
21
21
17
–
6
6.5
10
11
12
13
14
–
25
25
25
25
25
25
20
–
7
7.5
12
13
14
16
17
–
50
50
45
2.9
50
50
25
0.6
50
50
25
0.6
60
50
45
2.9
60
50
25
0.6
60
50
25
0.6
72
72
65
2.9
72
72
35
0.6
72
72
35
0.6
DILM80
DILM95
DILM115
DILM150
UL/CSA pending for DILM80 – DILM150.
Product available in Fall 2005. Contact your Moeller representative.
For Sales and Support call KMparts.com (866) 595-9616
43
Technical Data
DILM7 – DILM150 Contactors
Current Heat Loss (3-Pole)
Current heat loss at Ith
Current heat loss at Ie to AC-3 / 400 V
Impedance per pole
Magnet Systems
Pick-up and drop-out values
AC
Pick-up
Drop-out
DC
Pick-up
Drop-out
Power consumption of the coil at cold state and 1.0 x Uc
AC
Pick-up
Single-voltage coil 50 Hz
Sealing
60 Hz
Pick-up
60 Hz
Sealing
50/60 Hz
Pick-up
DILM7
DILM9
DILM12
DILM17
DILM25
DILM32
[W]
[W]
[mΩ]
4.7
0.37
2.5
4.7
0.6
2.5
4.7
1.1
2.5
7.3
1.7
2
9.6
3.8
2
12.1
6.1
2
[x Uc]
[x Uc]
[x Uc]
[x Uc]
0.8 – 1.1
0.3 – 0.6
0.8 – 1.1 ➊
0.15 – 0.6
0.8 – 1.1
0.2 – 0.6
0.8 – 1.1 ➊
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.8 – 1.1 ➊
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
[VA]
[W]
[VA]
[W]
[VA]
[W]
[VA]
[W]
[W]
[W]
[% DF]
24
19
4
1.2
29
23
4.4
1.3
28
26
22
21
4.6
3.9
1.4
1.2
3
3
100
24
19
4
1.2
29
23
4.4
1.3
28
26
22
21
4.6
3.9
1.4
1.2
3
3
100
24
19
4
1.2
29
23
4.4
1.3
28
26
22
21
4.6
3.9
1.4
1.2
4.5
4.5
100
50
40
8
2.4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
50
40
8
2.4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
50
40
8
2.4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
[ms]
[ms]
[ms]
[ms]
[ms]
< 20
< 15
< 35
< 15
10
< 20
< 15
< 35
< 15
10
< 20
< 15
< 35
< 15
10
< 25
< 20
< 55
< 15
10
< 25
< 20
< 55
< 15
10
< 25
< 20
< 55
< 15
10
[VA]
[W]
50/60 Hz
Sealing
DC operated
Pick-up
Sealing
[VA]
[W]
Duty factor
Switching times at 100 % Uc (approximate values)
Main contacts
AC
Closing delay
Opening delay
DC
Closing delay
Opening delay
Arcing time
Electromagnetic Compatibility (EMC)
Emitted interference
Noise immunity
to EN 60947-1
to EN 60947-1
➊ At 24 V: 0.7 – 1.3 without additional auxiliary contact modules and ambient
temperature + 40° C.
➋ RDC 24 (Umin 24 V DC/Umax 27 V DC)
RDC 60 (Umin 48 V DC/Umax 60 V DC)
RDC 130 (Umin 110 V DC/Umax 130 V DC)
RDC 240 (Umin 200 V DC/Umax 240 V DC)
Example:
Uc = 0.7 x Umin – 1.2 x Umax
Uc = 0.7 x 24 V – 1.2 x 27 V DC
44
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM7 – DILM150 Contactors
DILM40
DILM50
DILM65
11.3
7.2
1.5
16.2
11.3
1.5
15.6
12.7
1.5
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
0.8 – 1.1
0.3 – 0.6
0.7 – 1.2 ➋
0.15 – 0.6
130
80
14
4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
130
80
14
4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
130
80
14
4
62
50
9.1
2.7
60
54
48
43
9.5
7.9
2.8
2.4
12 at 24 V
0.5 at 24 V
100
< 25
< 25
< 60
< 20
10
< 25
< 25
< 60
< 20
10
< 25
< 25
< 60
< 20
10
DILM80
DILM95
DILM115
DILM150
UL/CSA pending for DILM80 – DILM150.
Product available in Fall 2005. Contact your Moeller representative.
to EN 60947-1
to EN 60947-1
➊ At 24 V: 0.7 – 1.3 without additional auxiliary contact modules and ambient
temperature + 40° C.
➋ RDC 24 (Umin 24 V DC/Umax 27 V DC)
RDC 60 (Umin 48 V DC/Umax 60 V DC)
RDC 130 (Umin 110 V DC/Umax 130 V DC)
RDC 240 (Umin 200 V DC/Umax 240 V DC)
Example:
Uc = 0.7 x Umin – 1.2 x Umax
Uc = 0.7 x 24 V – 1.2 x 27 V DC
For Sales and Support call KMparts.com (866) 595-9616
45
Technical Data
DILM185 – DILM1000 Contactors
General
Standards
UL, CSA, IEC/EN 60947, VDE 0660
Lifespan, mechanical
AC
DC
Operating frequency, mechanical
AC
DC
Climatic proofing
Damp heat, constant, to IEC 60068-2-78 – Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Open
Enclosed
Storage
Ops
Ops
[x 106]
[x 106]
Ops/h
Ops/h
DILM185
DILM225
DILM250
10
10
10
10
10
10
3000
3000
3000
3000
3000
3000
°
90
90
°
[°C / °F] -25/60°C / -13/140°F -25/60°C / -13/140°F -25/60°C / -13/140°F
[°C / °F] -25/40°C / -13/104°F -25/40°C / -13/104°F -25/40°C / -13/104°F
[°C / °F] -40/80°C / -40/176°F -40/80°C / -40/176°F -40/80°C / -40/176°F
Mechanical shock resistance (IEC/EN 60068-2-27)
Half-sinusoidal shock 10 ms
Main
Auxiliary
Make contact
Make contact
Break contact
Degree of protection
Protection against direct contact when actuated from front (IEC 536)
Finger- and back-of-hand proof with terminal shroud or terminal block
Weight
Main cable cross-section
Flexible with cable lug
Stranded with cable lug
Solid or stranded
Flat conductor
Fixing with flat cable terminal or cable terminal blocks. See terminal capacity for cable terminal blocks.
Busbar
Main cable connection screw/bolt
Tightening torque
Control circuit cable cross-sections
Control circuit cable connection screw/bolt
Tightening torque
Tools
46
30°
180°
Mounting position
Main cable
Control circuit cable
Width
30°
[g]
[g]
[g]
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
[kg]
[mm2]
[mm2]
[AWG]
6.5
35 – 95
50 – 120
1 / 0 – 250 MCM
6.5
50 – 240
70 – 240
2 / 0 – 500 MCM
6.5
50 – 240
70 – 240
2 / 0 – MCM
20
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
20
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
25
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
[mm]
[mm]
[Nm]
Solid
[mm2]
Flexible with Ferrule
[mm2]
Solid or stranded
[AWG]
Wrench
Pozidriv screwdriver
[Nm]
[mm]
[Size]
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM185 – DILM1000 Contactors
DILM400
DILM500
DILM580
DILM650
DILM750
DILM820
DILM1000
7
7
7
7
7
7
5
5
5
5
5
5
5
5
5
5
2000
2000
2000
2000
2000
2000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
-25/60°C / -13/140°F
-25/40°C / -13/104°F
-40/80°C / -40/176°F
°
90
90
°
DILM300
90
180°
˚
30°
30°
˚
30°
90
30°
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
10
10
8
IP00
8
50 – 240
70 – 240
2/0 – 500 MCM
8
50 – 240
70 – 240
2/0 – 500 MCM
8
50 – 240
70 – 240
2/0 – 500 MCM
15
50 – 240
70 – 240
2/0 – 500 MCM
15
50 – 240
70 – 240
2/0 – 500 MCM
15
50 – 240
70 – 240
2/0 – 500 MCM
15
50 – 240
70 – 240
2/0 – 500 MCM
15
50 – 240
70 – 240
2/0 – 500 MCM
25
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
25
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
30
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
50
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
50
M10
24
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
16
2
60
M12
35
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
18
2
60
M12
35
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
18
2
60
M12
35
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
1.2
18
2
For Sales and Support call KMparts.com (866) 595-9616
47
Technical Data
DILM185 – DILM1000 Contactors
Main Contacts
Rated impulse withstand voltage
Overvoltage category/pollution degree
Rated insulation voltage
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
between coil and contacts
between the contacts
Making capacity cos φ to IEC/EN 60947 up to 690 V
Breaking capacity
Component lifespan
Short-circuit rating
Short-circuit protection rating max. fuse
Type “2”
Type “1”
48
DILM225
DILM250
8000
III/3
1000
1000
8000
III/3
1000
1000
Uimp
[V AC]
Ui
Ue
[V AC]
[V AC]
8000
III/3
1000
1000
[V AC]
[V AC]
[A]
[A]
[A]
[A]
[A]
[A]
500
500
3000
2500
2500
2500
2500
760
500
500
3000
2500
2500
2500
2500
760
see page 35
500
500
3000
2500
2500
2500
2500
760
[A]
[A]
[A]
[A]
[A]
[A]
315
315
160
400
400
200
315
315
160
400
400
200
315
315
160
400
400
200
220/230 V
380/400 V
500 V
660/690 V
1000 V
AC-3/AC-4; 400 V
400 V
690 V
1000 V
400 V
690 V
1000 V
DILM185
gG/gL 500 V
gG/gL 690 V
gG/gL 1000 V
gG/gL 500 V
gG/gL 690 V
gG/gL 1000 V
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM185 – DILM1000 Contactors
DILM300
DILM400
DILM500
DILM580
DILM650
DILM750
DILM820
DILM1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
8000
III/3
1000
1000
500
500
5500
5000
5000
5000
5000
950
500
500
5500
5000
5000
5000
5000
950
500
500
5500
5000
5000
5000
5000
950
500
500
7800
6500
6500
6500
6500
4350
500
500
7800
6500
6500
6500
6500
4350
500
500
9840
8200
8200
8200
8200
5800
500
500
9840
8200
8200
8200
8200
5800
500
500
9840
8200
8200
8200
8200
5800
630
630
500
1000
1000
630
630
630
630
1200
1200
800
630
630
630
1200
1200
800
630
630
630
1200
1200
800
see page 35
500
500
200
630
630
250
500
500
200
630
630
250
500
500
200
630
630
250
630
630
500
1000
1000
630
For Sales and Support call KMparts.com (866) 595-9616
49
Technical Data
DILM185 – DILM1000 Contactors
AC
AC-1
Conventional free air thermal current, 3-pole, 50 – 60 Hz Open
Conventional free air thermal current, 1-pole
Enclosed ➊
Open ➊
Enclosed ➊
AC-3
Rated operational current open, 50 – 60 Hz ➊
Rated power
AC-4
Rated operational current open, 50 – 60 Hz
Rated power
Capacitor Duty
Individual compensation rated operational current Ie
of three-phase capacitors
Open
40° C
50° C
55° C
60° C
/ 104° F
/ 122° F
/ 131° F
/ 140° F
DILM185
DILM225
DILM250
[A]
[A]
[A]
[A]
[A]
[A]
[A]
337
301
287
275
250
685
625
386
345
329
315
275
785
685
429
383
366
350
300
875
750
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
P
P
P
P
P
P
P
P
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
185
185
185
185
185
185
185
76
55
62
90
110
115
132
175
108
225
225
225
225
225
225
225
76
70
75
110
132
142
160
215
108
250
250
250
250
250
250
250
76
75
85
132
148
157
180
240
108
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
1000 V
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
P
P
P
P
P
P
P
P
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
136
136
136
136
136
136
136
76
41
45
75
80
85
96
127
108
164
164
164
164
164
164
164
76
51
54
90
96
102
116
155
108
200
200
200
200
200
200
200
76
62
68
110
117
125
143
189
108
up to 525 V
Ie
[A]
220
220
220
690 V
Ie
[A]
[x Ie]
[x 106]
133
30
0.1
200
133
30
0.1
200
133
30
0.1
200
Max. inrush current peak
Component lifespan
Max. operating frequency
Ops
Ops/h
➊ At maximum permissible ambient temperature.
50
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM185 – DILM1000 Contactors
DILM300
DILM400
DILM500
DILM580
DILM650
DILM750
DILM820
DILM1000
490
438
418
400
350
1000
875
612
548
522
500
450
1250
1125
857
767
731
700
650
1750
1600
980
876
836
800
–
2000
–
1041
931
888
850
–
2125
–
1102
986
940
900
–
2250
–
1225
1095
1044
1000
–
2500
–
1225
1095
1044
1000
–
2500
–
300
300
300
300
300
300
300
95
90
100
160
180
190
215
286
132
400
400
400
400
400
400
360
95
125
132
200
240
255
290
344
132
500
500
500
500
500
500
360
95
155
170
250
300
345
360
344
132
580
580
580
580
580
580
580
435
185
200
315
348
370
420
560
600
650
650
650
650
650
650
650
435
205
225
355
390
420
470
630
600
750
750
750
750
750
750
750
580
240
260
400
455
480
550
720
800
820
820
820
820
820
820
820
580
260
285
450
500
525
600
750
800
1000
1000
1000
1000
1000
1000
1000
700
315
340
560
610
650
730
1000
1000
240
240
240
240
240
240
240
95
75
82
132
142
151
172
229
132
296
296
296
296
296
296
296
95
92
101
160
176
186
214
283
132
360
360
360
360
360
360
296
95
112
122
200
216
229
260
344
132
456
456
456
456
456
456
456
348
143
156
250
274
290
330
440
509
512
512
512
512
512
512
512
348
161
176
280
307
326
370
494
509
576
576
576
576
576
576
576
464
181
200
315
346
367
417
556
678
656
656
656
656
656
656
656
464
209
228
355
394
418
474
633
678
800
800
800
800
800
800
800
700
260
280
450
490
520
590
780
1000
307
307
307
463
463
463
463
463
177
30
0.1
200
177
30
0.1
200
177
30
0.1
200
265
30
0.1
200
265
30
0.1
200
265
30
0.1
200
265
30
0.1
200
265
30
0.1
200
For Sales and Support call KMparts.com (866) 595-9616
51
Technical Data
DILM185 – DILM1000 Contactors
DC
Rated operational current, open
DC-1
DC-3
DC-5
Current Heat Loss (3-pole)
Current heat loss at Ith
Current heat loss at Ie to AC-3 / 400 V
Magnet Systems
Voltage tolerance ➊
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
60 V
110 V
220 V
440 V
60 V
110 V
220 V
60 V
110 V
220 V
DILM... comfort series
DILM... comfort series
DILM... comfort series
Power consumption of the coil at cold
state and 1.0 x Uc
Pick-up
Drop-out
Pick-up
Sealing
Duty factor
Switching times at 100 % Uc (approximate values)
Main contacts
DILM... comfort series
Closing delay
Opening delay
Voltage interruptions
Reaction in marginal and transition
(0 – 0.2 x Uc min) ≤ 10 ms
range (Comfort series)
(0 – 0.2 x Uc min) ≥ 10 ms
Voltage dips
(0.2 – 0.6 x Uc min) ≤ 12 ms
(0.2 – 0.6 x Uc min) > 12 ms
(0.6 – 0.7 x Uc min)
Excess voltage
(1.15 – 1.3 x Uc max)
(> 1.3 x Uc max) ≤ 3 s
(> 1.3 x Uc max) ≤ 3 s
Pick-up phase
(0 – 0.7 x Uc min)
(0.7 x Uc min – 1.15 x Uc max)
(1.15 x Uc max)
Permissible contact resistance (of the external command device with actuation of A11)
Permissible residual current (with actuation of A11 by the electronics with 0 signal)
SPS signal level (A3 – A4) to IEC/EN 61131-2 (Type 2)
High
Low
Electromagnetic Compatibility (EMC)
DILM185
DILM225
DILM250
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
300
300
300
11
300
300
300
300
300
300
300
300
300
11
300
300
300
300
300
300
300
300
300
11
300
300
300
300
300
300
[W]
[W]
79
36
108
55
95
48
[x Uc]
[x Uc]
[VA]
[W]
[VA]
[W]
[% DF]
[ms]
[ms]
[mΩ]
[mA]
[V]
[V]
0.7 x Uc min – 1.15 x Uc max
0.2 x Uc min – 0.6 x Uc max
250 ➋
250 ➋
250 ➋
200
200
200
4.3
4.3
4.3
3.3
3.3
3.3
100
100
100
< 100
< 80
< 100
< 100
< 80
< 80
Time is bridged successfully
Drop-out of the contactor
Time is bridged successfully
Drop-out of the contactor
Contactor remains switched on
Contactor remains switched on
Contactor remains switched on
Drop-out of the contactor
Contactor does not switch on
Contactor switches on with certainty
Contactor switches on with certainty
≤500
≤500
≤500
≤1
≤1
≤1
15
15
15
5
5
5
This product is designed for operation in industrial
environments (Environment 2). Usage in domestic
areas (Environment 1) can cause radio frequency
interence (RFI) so that additional interference to
noise suppression measures must be provided.
➊ Uc min, Uc max – please see page 29
➋ Control transformer with Uk ≤ 6%
52
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILM185 – DILM1000 Contactors
DILM300
DILM400
DILM500
DILM580
DILM650
DILM750
DILM820
DILM1000
400
400
400
11
400
400
400
400
400
400
400
400
400
11
400
400
400
400
400
400
400
400
400
11
400
400
400
400
400
400
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
123
69
188
120
236
120
227
120
257
150
288
200
355
239
355
355
450 ➋
350
4.3
3.3
100
0.7 x Uc min – 1.15 x Uc max
0.2 x Uc min – 0.6 x Uc max
450 ➋
350
4.3
3.3
100
450 ➋
350
4.3
3.3
100
800 ➌
700
7.5
6.5
100
800 ➌
700
7.5
6.5
100
800 ➌
700
7.5
6.5
100
800 ➌
700
7.5
6.5
100
800 ➌
700
7.5
6.5
100
< 80
< 80
< 80
< 80
< 80
< 80
<70
<70
<70
<70
<70
<70
≤500
≤1
15
5
≤500
≤1
15
5
≤500
≤1
15
5
≤500
≤1
15
5
≤500
≤1
15
5
≤500
≤1
15
5
<70
<70
<70
<70
Time is bridged successfully
Drop-out of the contactor
Time is bridged successfully
Drop-out of the contactor
Contactor remains switched on
Contactor remains switched on
Contactor remains switched on
Drop-out of the contactor
Contactor does not switch on
Contactor switches on with certainty
Contactor switches on with certainty
≤500
≤500
≤1
≤1
15
15
5
5
This product is designed for operation in industrial
environments (Environment 2). Usage in domestic
areas (Environment 1) can cause radio frequency
interence (RFI) so that additional interference to
noise suppression measures must be provided.
➋ Control transformer with Uk ≤ 6%
➌ Control transformer with Uk ≤ 7%
For Sales and Support call KMparts.com (866) 595-9616
53
Technical Data
Auxiliary Contacts
DILM7-... –
DILM32-...
Auxiliary Contacts
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L)
Break contact (not late-break contact) suitable as a mirror contact (to IEC/EC 60947-4-1 Annex F)
Rated impulse withstand voltage
Overvoltage category/pollution degree
Rated insulation voltage -AC
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
between coil and axiliary contacts
between the auxiliary contacts
Rated operational current
AC-15
230 V
380/415 V
500 V
24 V
DC-13 L/R ≤ 15 ms ➊
60 V
110 V
220 V
Conventional thermal current
Control circuit reliability ➋
Component lifespan at Ue = 230 V, AC-15, 3A
Short-circuit rating without welding max. fuse ➌
DILA-XHI...
DILM32-XHI...
DILM150-XHI...
DILM1000-XHI...
–
Yes
Yes
Yes
DILM7 – DILM32
DILM7 – DILM32
DILM7 – DILM32
DILM40 – DILM65
6000
III/3
690
500
6000
III/3
690
500
6000
III/3
690
500
Yes
DILM40 – DILM65
DILM185 – DILM1000
6000
III/3
690
500
400
400
Uimp
[V AC]
Ui
Ue
[V AC]
[V AC]
6000
III/3
690
500
[V AC]
[V AC]
400
400
400
400
440
440
440
440
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[l]
[x 106]
[A gG/gL]
6
4
1.5
10
6
3
1
10
6
6
6
4
4
4
–
1.5
1.5
10
10
10
6
6
6
3
3
3
1
1
1
10
10
10
<108, <1 one failure at 100 million operations
1.3
1.3
1.3
10
10
16
6
4
1.5
10
6
3
1
10
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ith
Failure Rate
Ops
1.3
10
➊ Making and breaking conditions to DC-13, time L/R constant as stated
➋ At Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA
➌ See “Fuses” overlay for time/current characteristic (on request)
54
For Sales and Support call KMparts.com (866) 595-9616
1.3
16
Technical Data
DILEM Miniature Contactors
DILEM
General
Standards
Mechanical Lifespan
Maximum Operating Frequency
Mechanical
Electrical (Contactor without Overload Relay)
Operations x 106
DILEM-G
DILEM4-G
UL, CSA, IEC/EN 60 947, VDE 0660
20
20
10
[Ops/h]
9000
[°C / °F]
[°C / °F]
-25/50°C / -13/122°F
-25/40°C / -13/104°F
–
9000
9000
See characteristic curve
Damp heat, constant, to IEC 60 068-2-78
Damp heat, cyclic, to IEC 60 068-2-30
Climatic Proofing
Ambient Temperature
Open
Enclosed
DILEM4
-25/50°C / -13/122°F
-25/40°C / -13/104°F
9000
-25/50°C / -13/122°F
-25/40°C / -13/104°F
-25/50°C / -13/122°F
-25/40°C / -13/104°F
Mounting Position
[g]
[g]
10
10/8
10
10/8
[g]
[g]
10
20/20
IP20
[kg]
0.2
10
10
20/20
20/20
IP20
IP20
Finger- and back-of-hand proof
0.17
0.2
[mm2]
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 1.5)
2 x (0.75 – 1.5)
18 – 14
M3.5
2
0.8 x 5.5
1x6
1.2
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 1.5)
2 x (0.75 – 1.5)
18 – 14
M3.5
2
0.8 x 5.5
1x6
1.2
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 1.5)
2 x (0.75 – 1.5)
18 – 14
M3.5
2
0.8 x 5.5
1x6
1.2
1 x (0.75 – 2.5)
2 x (0.75 – 2.5)
1 x (0.75 – 1.5)
2 x (0.75 – 1.5)
18 – 14
M3.5
2
0.8 x 5.5
1x6
1.2
1 x (1 – 2.5)
2 x (1 – 2.5)
1 x (1 – 2.5)
2 x (1 – 2.5)
0.6 x 3.5
1 x (1 – 2.5)
2 x (1 – 2.5)
1 x (1 – 2.5)
2 x (1 – 2.5)
0.6 x 3.5
1 x (1 – 2.5)
2 x (1 – 2.5)
1 x (1 – 2.5)
2 x (1 – 2.5)
0.6 x 3.5
1 x (1 – 2.5)
2 x (1 – 2.5)
1 x (1 – 2.5)
2 x (1 – 2.5)
0.6 x 3.5
[mm2]
Solid or stranded
Terminal screw
Pozidriv screwdriver
Standard screwdriver
[AWG]
Max. tightening torque
Terminal capacity of of springloaded main terminals
Solid
[Nm]
Flexible with ferrule
Standard screwdriver
A1
Flexible with ferrule
[Size]
[mm]
[mm2]
[mm2]
[mm]
For Sales and Support call KMparts.com (866) 595-9616
10
–
A2
As required except vertical with terminals A1/A2 at the bottom
Mechanical Shock Resistance
Half-Sinusoidal Shock 10 ms
Basic unit without auxiliary contact module
Main contacts make contact
Main contacts make/break contact
Basic unit with auxiliary contact module
Main contacts make contact
Main contacts make/break contact
Degree of protection
Protection against direct contact when actuated from front
Weight
Terminal capacity of main and auxiliary contacts
Solid
10
–
10
20/20
IP20
0.17
55
Technical Data
DILEM Miniature Contactors
Main Contacts
Rated impulse withstand voltage
Overvoltage category/pollution degree
Rated insulation voltage
Rated opererational voltage
Safe isoltation to VDE 0106 Part 101 and Part 101/A1
between coil and contacts
between the contacts
Making capacity (cos φ to IEC/EN 60947)
Breaking capacity
220/230 V
380/400 V
500 V
660/690 V
Component lifespan
AC-1
Short-circuit protection rating maximum fuse
Type “2”
Type “1”
AC
AC-1 Operation
Conventional free air thermal current, 3-pole, 50 – 60 Hz
Open
at 40° C
at 50° C
at 55° C
Enclosed ➊
Conventional free air thermal current, 1-pole
Open ➊
Enclosed ➊
AC-3 Operation
220/230 V
Rated operational current, open,
50 – 60 Hz ➊
240 V
380/400 V
415 V
440 V
550 V
660/690 V
Rated power
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
AC-4 operation
220/230 V
Rated operational current, open,
50 – 60 Hz ➊
240 V
380/400 V
415 V
440 V
500 V
660/690 V
Rated power
220/230 V
240 V
380/400 V
415 V
440 V
500 V
660/690 V
DILEM
DILEM-G
DILEM4
DILEM4-G
6000
III/3
690
690
6000
III/3
690
690
6000
III/3
690
690
6000
III/3
690
690
[V AC]
[V AC]
[A]
[A]
[A]
[A]
[A]
300
300
110
90
90
64
54
see page 36
300
300
110
90
90
64
54
300
300
110
90
90
64
54
300
300
110
90
90
64
54
gL/gG
gL/gG
[A]
[A]
10
20
10
20
10
20
10
20
Ith
Ith
Ith
Ith
[A]
[A]
[A]
[A]
22
20
19
16
22
20
19
16
22
20
19
16
22
20
19
16
Ith
Ith
[A]
[A]
50
40
50
40
60
50
60
50
Ie
Ie
Ie
Ie
Ie
Ie
Ie
P
P
P
P
P
P
P
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
9.0
9.0
9.0
9.0
9.0
6.4
4.8
2.2
2.5
4
4.3
4.6
4
4
9.0
9.0
9.0
9.0
9.0
6.4
4.8
2.2
2.5
4
4.3
4.6
4
4
9.0
9.0
9.0
9.0
9.0
6.4
4.8
2.2
2.5
4
4.3
4.6
4
4
9.0
9.0
9.0
9.0
9.0
6.4
4.8
2.2
2.5
4
4.3
4.6
4
4
Ie
Ie
Ie
Ie
Ie
Ie
Ie
P
P
P
P
P
P
P
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
[kW]
6.6
6.6
6.6
6.6
6.6
5
3.4
1.5
1.8
3
3.1
3.3
3
3
6.6
6.6
6.6
6.6
6.6
5
3.4
1.5
1.8
3
3.1
3.3
3
3
6.6
6.6
6.6
6.6
6.6
5
3.4
1.5
1.8
3
3.1
3.3
3
3
6.6
6.6
6.6
6.6
6.6
5
3.4
1.5
1.8
3
3.1
3.3
3
3
Uimp
[V AC]
Ui
Ue
[V AC]
[V AC]
➊ At maximum permissible ambient temperature.
56
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILEM Miniature Contactors
DC
Rated operational current, open ➊
DC-1
12 V
24 V
60 V
110 V
220 V
12 V
24 V
60 V
110 V
220 V
12 V
24 V
60 V
110 V
220 V
DC-3
DC-5
Current heat loss (3 or 4 pole)
at Ith
at Ie to AC-3 / 400 V
Magnet Systems
Voltage tolerance
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz
Dual-frequency coil 50/60 Hz
DC operated ➋
Power consumption
AC operation
Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz
Dual-frequency coil 50/60 Hz at 50 Hz
Dual-frequency coil 50/60 Hz at 60 Hz
DC operation ➋
Power consumption pick-up = sealing
Duty factor
Switching time @ 100 % Uc
Make contact
Closing delay
Min.
Max.
Opening delay
Min.
Max.
Closing delay with top mounting auxiliary contact
Reversing contactors
Min.
Changeover time @ 110 % Uc
Max.
Arcing time at 690 V AC
DILEM
DILEM-G
DILEM4
DILEM4-G
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
20
20
20
20
20
8
8
4
3
–
2.5
2.5
2.5
1.5
0.3
20
20
20
20
20
8
8
4
3
–
2.5
2.5
2.5
1.5
0.3
–
–
–
–
–
–
–
–
–
1
–
–
–
2.5
1
–
–
–
–
–
–
–
–
–
1
–
–
–
2.5
1
[W]
[W]
2
0.5
3.5
0.7
2.7
–
4.7
–
Pick-up
Pick-up
Pick-up
[x Uc]
[x Uc]
[x Uc]
0.8 – 1.1
0.85 – 1.1
–
–
–
0.8 – 1.1
0.8 – 1.1
0.85 – 1.1
–
–
–
0.85 – 1.1
Pick-up
Pick-up
Sealing
Sealing
Pick-up
Pick-up
Sealing
Sealing
Pick-up
Pick-up
Sealing
Sealing
[VA]
[W]
[VA]
[W]
[VA]
[W]
[VA]
[W]
[VA]
[W]
[VA]
[W]
25
22
4.6
1.3
30
26
5.4
1.6
29
24
3.9
1.1
–
–
–
–
–
–
–
–
–
–
–
–
25
22
4.6
1.3
30
26
5.4
1.6
29
24
3.9
1.1
–
–
–
–
–
–
–
–
–
–
–
–
[VA / W]
[% DF]
–
100
2.6
100
–
100
2.6
100
[ms]
[ms]
[ms]
[ms]
[ms]
14
21
8
18
max. 45
26
35
15
25
max. 70
14
21
8
18
max. 45
26
35
15
25
max. 70
[ms]
[ms]
[ms]
16
21
max. 12
40
50
max. 12
16
21
max. 12
40
50
max. 12
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
➊ At maximum permissible ambient temperature.
➋ Smoothed DC or three-phase bridge rectifier.
For Sales and Support call KMparts.com (866) 595-9616
57
Technical Data
DILEM Miniature Contactors
Auxiliary Contacts
Interlocked opposing contacts to ZH 1 / 457, including auxiliary contact module
Rated impulse withstand voltage
Overvoltage category/pollution degree
Rated insulation voltage
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
between coil and auxiliary contacts
between the auxiliary contacts
Rated operational current
AC-15
DC-13
L/R ≤ 15 ms
Contacts in series:
Conventional thermal current
Control circuit reliability (@ Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA)
Component lifespan @ Ue = 240 V
AC-15
DC-13 ➊ L/R = 50ms: 2 contacts in series at Ie = 0.5 A
Short-circuit rating without welding
Maximum overcurrent protective device
Short-circuit protection rating maximum fuse
220/240 V
380/415 V
500 V
1
2
3
3
Current heat loss at conventional free air thermal current Ith
Per contact
...DILEM
Yes
6000
III/3
690
600
300
300
Uimp
[V AC]
Ui
Ue
[V AC]
[V AC]
Yes
6000
III/3
690
600
[V AC]
[V AC]
300
300
Ie
Ie
Ie
Failure Rate
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[ops.]
Operations
Operations
[x 106]
[x 106]
0.2
0.15
0.2
0.15
[A gG/gL]
[A fast]
PKZM0-4
6
10
PKZM0-4
6
10
[W]
0.2
0.2
24 V
60 V
100 V
220 V
Ith
500 V
500 V
DILEM
6
4
3
2
1.5
1.5
2.5
2.5
2.5
2.5
1.5
1.5
0.5
0.5
10
10
<108, <one failure @ 100 million
➊ Making and breaking conditions to DC-13, time L/R constant as stated.
58
For Sales and Support call KMparts.com (866) 595-9616
Technical Data
DILMK Contactors
DIL00MK
General
Standards
Ambient temperature
Open
DIL0MK
DIL1MK
DIL2MK
DIL3MK72
-25/50° C
-13/122° F
-25/40° C
-13/104° F
-25/55° C
-13/131° F
-25/40° C
-13/104° F
UL, CSA, IEC/EN 60947, VDE 0660
[°C ]
[°F]
[°C ]
[°F]
-25/50° C
-13/122° F
-25/40° C
-13/104° F
30°
30°
30°
180°
90
°
Mounting position
-25/50° C
-13/122° F
-25/40° C
-13/104° F
°
90
90
°
Enclosed ➊
-25/50° C
-13/122° F
-25/40° C
-13/104° F
Degree of protection
Protection against direct contact from the front when actuated by a
perpendicular test finger (IEC 536)
Weight
AC
[kg]
DC
[kg]
Terminal capacity (screw terminals; 1 or 2 conductors can be connected)
Main cable ➋
Solid
[mm2]
Flexible with ferrule
[mm2]
Stranded
[mm2]
Solid or stranded
[AWG]
Group Compensation
Rated operational current Ie of three-phase capacitors
230 V
Open ➊
400 V
525 V
690 V
230 V
Enclosed ➊
400 V
525 V
690 V
Making capacity (i-peak value) without damping
Component lifespan
Ops
Maximum operating frequency
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[x 106]
[Ops/h]
IP20
IP00
IP00
IP00
IP00
Finger- and back-of-hand proof
0.32
0.50
0.42
0.77
0.71
1.25
0.95
1.85
2
2
1 x (0.75–4)
2 x (0.75–4)
1 x (0.75–4)
2 x (0.75–4)
–
–
18
10
1 x (1 – 6)
2 x (1 – 6)
1 x (1 – 6)
2 x (1 – 6)
–
–
16
10
1 x (2.5 – 10)
2 x (2.5 – 10)
1 x (2.5 – 16)
2 x (2.5 – 10)
1 x (10 – 25)
2 x 10
12
4
1 x (2.5 – 16)
2 x (2.5 – 16)
1 x (2.5 – 25)
2 x (2.5 – 10)
1 x (10 – 35)
2 x 10
12
2
1 x (6 – 16)
2 x (6 – 16)
1 x (4 – 50)
2 x (4 – 50)
16
50
10
2
18
19
15
15
13
15
12
12
180 x Ie
0.2
200
23
26
23
20
22
22
22
17
180 x Ie
0.1
200
40
38
39
30
32
32
32
25
180 x Ie
0.1
200
53
51
51
40
46
46
44
37
180 x Ie
0.1
200
77
72
66
63
71
68
66
63
180 x Ie
0.1
100
➊ At maximum admissible ambient temperature.
➋ Maximum of one size difference admissible when using 2 conductors.
For Sales and Support call KMparts.com (866) 595-9616
59
Technical Data
DILMK Contactors
...SDILM
Auxiliary Contacts
Rated impulse withstand voltage
Overvoltage category / pollution degree
Rated insulation voltage
Rated operational voltage
Safe isolation to IEC 536
between coil and auxiliary contacts
between the auxiliary contacts
Rated operational current
AC-15
220/240 V
380/415 V
500 V
Uimp
[V]
Ui
Ue
[V AC]
[V AC]
6000
III/3
690
500
[V AC]
[V AC]
440
440
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
6
4
1.5
10
6
3
1
16
Ie
Ie
Ie
24 V
60 V
100 V
220 V
DC-13 ➊ L/R ≤ 15 ms
L/R ≤ 15 ms
Ith
Conventional thermal current
Control circuit reliability (@ Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA)
< 10-8, < 1 fault in
100 million operations
Fault probability Hr
Short-circuit rating without welding
Maximum fuse ➋
Max. overcurrent protective device
Pilot duty rating (UL/CSA)
[A gG/gL]
220/230 V
[AC/DC]
16
–
A600/P300
➊ Making and breaking contacts to DC-13, time constant as stated.
➋ See transparent overlay “Fuses” for time/current characteristics.
60
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
DILM Contactors
Contactors
DILM7
DILM9
DILM12
36
8.7 8.7 8.7 8.7
60
68
45
18
2 x M4
(5.1)
3.2
35
6.5
45
75
116.3
DILM17
DILM25
DILM32
75
85
71
38
60.4
2 x M4
4.5
4.8
11.6
(6.4)
4.5
6.5
17.7
35
97.4
11.6 10.6
45
138.7
★Dimensions are in millimeters.
For Sales and Support call KMparts.com (866) 595-9616
61
Dimensions
DILM Contactors
Contactors
DILM40
DILM50
DILM65
105
104
57
86.4
2 x M4
34.4
4.7
55
6.9
45
113.8
132.1
b2
b
b1
146.75
dimension
DILM12-XSPR...
DILM12-XSPV...
DILM32-XSPR...
DILM32-XSPV...
DILM95-XSPR...
DILM95-XSPV...
a
25
25
25
a1
9.2
9.2
20
b
25.9
16
18.5
b1
28
28
28
b2
≈32
≈32
≈32
c
9
9
9
c
a1
a
★Dimensions are in millimeters.
62
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
DILM Contactors
b
Star-Delta Combination
a
c
dimension
SDAINLM12 – SDAINLM22
SDAINLM30 – SDAINLM55
a
158
158
b
68
85
c
125.2
147.3
b
Reversing Combination
a
c
dimension
DIULM7/21 – DIULM12/21
DIULM17/21 – DIULM32/21
DIULM40/11 – DIULM50/11
a
90
90
110
b
68
85
115
c
125.2
147.3
146.75
★Dimensions are in millimeters.
For Sales and Support call KMparts.com (866) 595-9616
63
Dimensions
DILM Contactors
Contactors
DILM185
DILM225
DILM250
DILM300
DILM400
DILM500
a2
a
Ø11
M6
b1
�
b
b2
b3
�
�
�
e
d1
a1
140
8
c
d2
dimension
DILM185
DILM225
DILM250
DILM300
DILM400
DILM500
a
140
140
140
160
160
160
a1
120
120
120
130
130
130
a2
160
160
160
180
180
180
b
180
180
180
200
200
200
b1
160
160
160
180
180
180
b2
164
164
164
184
184
189
b3
189
189
189
209
209
219
d1
20
20
25
25
25
38
d2
48
48
48
48
48
57
e
5
5
5
6
6
6
c
208
208
208
216
216
216
★Dimensions are in millimeters.
➊ DILM1000-XHI...-SI
➋ DILM1000-XHI11-SA
64
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
DILM Contactors
Contactors
DILM580
DILM650
DILM750
DILM820
DILM1000
f
�
215
b3
b2
232
M6
�
�
�
165
80
e
d1
140
250
232
270
dimension
DILM580
DILM650
DILM750
DILM820
DILM1000
b2
256
256
256
256
256
b3
286
286
296
296
296
d1
35
35
45
45
45
e
6
6
6
6
10
f
11
11
13.5
13.5
13.5
★Dimensions are in millimeters.
➊ DILM1000-XHI...-SI
➋ DILM1000-XHI11-SA
For Sales and Support call KMparts.com (866) 595-9616
65
Dimensions
DILEM Miniature Contactors
Mini Contactor Relay
DILEM
DILEM-G
c
50
58
M4
dimension
DILEM(-G)
c
52
c1
83
35
c1
45
★Dimensions are in millimeters.
66
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
Contactor with Terminal Shroud
Contactor with Terminal Shroud
DILM185 to DILM1000 with DILM...-XHB
a
DILM185 to DILM250 with Z5-.../FF250
523
328
b
110
150
34
DILM185
DILM225
DILM250
DILM185-XP1
DILM300
DILM400
DILM500
DILM580
DILM650
DILM750
DILM820
DILM1000
a
150
150
174
236
b
384
404
426
506
dimension
~144
Contactor with Start-Point Bridge + Terminal Shroud
DILM...-XS1
DILM185 – DILM250
DILM300 - DILM400
DILM500
a
150
150
176
b
127
137
146
b
dimension
a
★Dimensions are in millimeters.
For Sales and Support call KMparts.com (866) 595-9616
67
Dimensions
Contactor Combinations
Star-Delta Starter Combinations
108
61
SDAINLEM
83
180
Reversing Combination
108
61
DIULEM
90
94
★Dimensions are in millimeters.
68
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
Accessories
Suppressor
62.5
RCDILE
VGDILE
52
45
RCBDIL...
RCSDIL...
FDBDIL...
VGBDIL...
VGCDIL
c
dimension
RCBDIL
RCSDIL
FDBDIL
VGBDIL
VGCDIL
a
33
33
33
33
38
b
15
15
15
15
8
c
30
30
30
30
33
b
a
Amplifier Modules
VS1DIL
VS2DIL
a
ETS4-VS3
103
98
dimension
VS1DIL, VS2DIL
a
45
b
26
c
55
78
22.5
82.5
b
c
★Dimensions are in millimeters.
For Sales and Support call KMparts.com (866) 595-9616
69
Dimensions
Accessories
Sealable Shroud
HDILE
58
45
43
69
45
Mechanical Interlock
MVDILM
DILM500-XMV
58
MVDILE
a
90
dimension
DILM185 – DILM500
a
15
58
63
90
94
Cable Terminal Block
DILM...-XKU-S
dimension DILM185 – DILM225
198
DILM250
DILM300 – DILM400
198
218
b
b
135
222
30
★Dimensions are in millimeters.
70
For Sales and Support call KMparts.com (866) 595-9616
Dimensions
Accessories
Flat Strip Conductor Terminals
DILM...-XKB-S
DILM500
DILM580-650
DILM750-820
a
171
218
231
b
295
295
310
d
dimension
a
★Dimensions are in millimeters.
For Sales and Support call KMparts.com (866) 595-9616
71
Motor protection from Moeller
Protection solutions to 820A
Moeller offers an array of motor protection solutions, from the modest “ZE”
bi-metallic thermal overload relay, to our advanced ZEV electronic motor protector. We also offer relays specifically built for motors with PTC thermistors.
R
Better protection
>Superior IEC designs
>Class 10 protection for modern
motors
Modern motors are built with less metal, which means they dissipate less heat.
This calls for the modern protection offered by IEC-style Class 10 overload relays...
they trip in 10 seconds under locked rotor conditions. Most motor manufacturers
today recommend this type of “close” protection. If your application calls for longer
run-up times, our ZW7 current transformer relay or ZEV programmable relay are
an ideal choice.
>Ambient temperature compensation
Many standard features
>Test / OFF button
All Moeller overload relays come with a host of standard features including phasefailure sensitivity, temperature compensation, test / reset buttons and a trip-free
release. This safety feature prevents the relay from being held closed during an
actual overload.
>Automatic & manual reset
>Trip indication & trip-free release
>Integrated NO & NC contact
Worldwide approvals
With the benefit of all major approvals, motor protection from Moeller can be
used in virtually every country on the planet.
ZE
ZB12
ZB32
ZB65
Z5
Phase-failure sensitivity
✔
✔
✔
Temperature compensation
✔
✔
✔
✔
Auxiliary switch 1 NO + 1 NC
✔
✔
✔
✔
Test / OFF button
✔
✔
✔
✔
Reset button manual / auto
✔
✔
✔
✔
✔
✔
✔
Feature
Separate mounting
Protection for heavy starting duty
Trip-free release
✔
ZW7
(with PTCs)
✔
✔
✔
N/A
✔
✔
✔
✔
✔
✔
✔
✔
✔
N/A
✔
✔
✔
✔
LCD Display
✔
N/A
✔
LED Display
✔
Selectable trip time
✔
✔ = standard features
EMT
ZEV
74
For Sales and Support call KMparts.com (866) 595-9616
Overload Protection Guide
Contactors
Locate contactor first,
then scan down to
determine appropriate
overload relay
DILM7
DILM9
DILM12
DILEM
DILM17
DILM25
DILM32
DILM40
DILM50
DILM65
DILM80
DILM95
DILM150
M185
M225
M250
M300
M400
M500
M580
M650
M750
M820
M1000
Thermal Overload Relays
ZE - Direct Mount
0.1 – 12A setting range
See page 77
ZB12 - Direct Mount
0.1 – 16A setting range
See page 78
ZB32 - Direct Mount
0.1 – 32A setting range
See page 78
ZB65 - Direct Mount
6 – 65A setting range
See page 79
ZB150 - Direct Mount
Product available
Fall 2005. Contact
your Moeller
representative.
25 – 142A setting range
See page 79
Z5-.../FF250 - Direct or Separate Mount
50 – 250A setting range
See page 80
Current Transformer-operated Overload Relay
ZW7-... ➊
42 – 540A setting range
See page 81
Electronic Motor-protective Relay
ZEV ➋
1 – 820A setting range
See page 90
Thermistor Protection Relays
EMT6(DB)K
See page 98
➊ Can only be used up to DIL M580.
➋ Can only be used up to DIL M820.
For Sales and Support call KMparts.com (866) 595-9616
75
thermal overload relays
Reliable, consistent motor protection
Thermal overload motor protection has come a long way from the eutectic alloy solder-pots and replaceable “heaters” of yesterday. Today’s IEC-style relays from Moeller
feature bimetal technology that is very consistent, reliable and economical.
R
A great combination
Most of our thermal relays are specifically designed to be close-coupled to a
matching contactor. All ZE, ZB and Z5-series overloads, which cover the range
from fractional to 250A, are direct mount designs. The resulting motor starters fit
in an extremely compact footprint as narrow as 45mm. Protection for larger amp
sizes is accomplished with Moeller’s ZW7 overload relay with integrated current
transformers.
Many standard features
>Superior IEC designs
>Class 10 protection for modern
motors
>Ambient temperature compensation
>Test / OFF button
>Automatic & manual reset
>Trip indication & trip-free release
>Integrated NO & NC contact
Z-series overloads are the ideal choice In most industrial starting applications.
Below 250A, all relays are Class 10, which means they trip within 10 seconds of a
locked rotor condition. Many motor manufacturers agree that Class 10 devices offer superior protection against overloads, and also extend motor life by protecting
winding insulation.
All of Moeller’s thermal overload relays have ambient temperature compensation,
automatic or manual reset and a test button. In addition, trip indication and a tripfree release are important safety features. Trip-free releases prevent the device
from being held closed, even in the event of an overload.
Easy installation and operation
Once the overload is installed, a convenient dial adjustment
is used to set the motor full load amps. Moeller’s factory
calibration assures that your motor investment is protected
accurately.
76
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
ZE Thermal Overload Relays
> Class 10A overload; trip response from 2 to 10 seconds
> Ambient compensated, bi-metallic overload tripping mechanism
> Phase failure sensitive to IEC/EN 60947
> Manual / Automatic reset button
> Built-in NO and NC auxiliary contact
Direct Mount ZE Thermal Overload Relays for DILEM Miniature Contactors ➊
Short-Circuit
Protection
(Max 600V AC) ➋
Auxiliary
Contacts
Overload Relay
Adjustable
Setting Range
NO
NC
For use with...
Fuses (A)
Circuit
Breaker (A)
➌
Type
Article
Number
0.1 – 0.16
1
1
1
15
ZE-0,16
014263
0.16 – 0.24
1
1
1
15
ZE-0,24
014285
0.24 – 0.4
1
1
1
15
ZE-0,4
014300
0.4 – 0.6
1
1
1
15
ZE-0,6
014333
0.6 – 1
1
1
3
15
ZE-1,0
014376
1 – 1.6
1
1
6
15
ZE-1,6
014432
1.6 – 2.4
1
1
6
15
ZE-2,4
014479
2.4 – 4
1
1
15
15
ZE-4
014518
4–6
1
1
20
15
ZE-6
014565
6–9
1
1
35
15
ZE-9
014708
9 – 12
1
1
45
–
ZE-12 ➍
014752
DILEM
DIULEM
Price
See green
pages
➊ When using DILEM and ZE, a distance of at least 5mm should be maintained
between overload relays mounted side-by-side.
➋ Observe the maximum permissible fuse of the contactor with direct device
mounting.
➌ Max. 480V AC.
➍ UL/CSA only.
For Sales and Support call KMparts.com (866) 595-9616
77
Overload Relays
ZB Thermal Overload Relays
> Class 10A overload; trip response from 2 to 10 seconds
> Ambient compensated, bi-metallic overload tripping mechanism
> Phase failure sensitive to IEC/EN 60947
> Manual / Automatic reset button
> Built-in NO and NC auxiliary contact
Direct Mount ZB Thermal Overload Relays for DILM7 – DILM32 Contactors
Short-Circuit
Protection
(Max 600V AC) ➊
Auxiliary
Contacts
Overload Relay
Adjustable
Setting Range
NO
NC
0.1 – 0.16
1
1
For use with...
Fuses (A)
Circuit
Breaker (A)
1
25
ZB12-0,16
278431
Type
0.16 – 0.24
1
1
1
25
ZB12-0,24
278432
0.24 – 0.4
1
1
1
25
ZB12-0,4
278433
0.4 – 0.6
1
1
1
25
ZB12-0,6
278434
0.6 – 1
1
1
3
25
ZB12-1
278435
6
25
ZB12-1,6
278436
6
25
ZB12-2,4
278437
1 – 1.6
1
1
1.6 – 2.4
1
1
2.4 – 4
1
1
15
25
ZB12-4
278438
4–6
1
1
20
25
ZB12-6
278439
6 – 10
1
1
40
25
ZB12-10
278440
9 – 12
1
1
60
30
ZB12-12
278441
DILM7 – DILM12
DIULM7 – DIULM12
12 – 16
1
1
60
30
ZB12-16
290168
0.1 – 0.16
1
1
1
25
ZB32-0,16
278442
0.16 – 0.24
1
1
1
25
ZB32-0,24
278443
0.24 – 0.4
1
1
1
25
ZB32-0,4
278444
0.4 – 0.6
1
1
1
25
ZB32-0,6
278445
0.6 – 1
1
1
3
25
ZB32-1
278446
6
25
ZB32-1,6
278447
6
25
ZB32-2,4
278448
1 – 1.6
1
1
1.6 – 2.4
1
1
2.4 – 4
1
1
15
25
ZB32-4
278449
4–6
1
1
20
25
ZB32-6
278450
DILM17 – DILM32
DIULM17 – DIULM32
6 – 10
1
1
40
25
ZB32-10
278451
10 – 16
1
1
60
30
ZB32-16
278452
16 – 24
1
1
90
30
ZB32-24
278453
24 – 32
1
1
125
40
ZB32-32
278454
➊ Observe the maximum permissible fuse of the contactor with direct device
mounting.
78
Article
Number
For Sales and Support call KMparts.com (866) 595-9616
Price
See green
pages
Overload Relays
ZB Thermal Overload Relays
> Class 10A overload; trip response from 2 to 10 seconds
> Ambient compensated, bi-metallic overload tripping mechanism
> Phase failure sensitive to IEC/EN 60947
> Manual / Automatic reset button
> Built-in NO and NC auxiliary contact
Direct Mount ZB Thermal Overload Relays for DILM40 – DILM150 Contactors
Short-Circuit
Protection
(Max 600V AC) ➊
Auxiliary
Contacts
Overload Relay
Adjustable
Setting Range
NO
NC
Fuses (A)
Circuit
Breaker (A)
6 – 10
1
1
40
40
ZB65-10
278455
For use with...
Type
Article
Number
10 – 16
1
1
60
60
ZB65-16
278456
16 – 24
1
1
90
90
ZB65-24
278457
24 – 40
1
1
125
125
ZB65-40
278458
40 – 57
1
1
200
150
ZB65-57
278459
50 – 65
1
1
200
150
ZB65-65
278460
25 – 35
1
1
125
125
ZB150-35
278461
35 – 50
1
1
225
200
ZB150-50
278462
50 – 70
1
1
250
250
ZB150-70
278463
70 – 100
1
1
600 Class J
400
ZB150-100
278464
95 – 125
1
1
500 Class J
500
ZB150-125
278465
120 – 142
1
1
400 Class J
600
ZB150-150
278466
DILM40 to DILM65
DIULM40 to DIULM65
DILM80 to DILM150
DIULM80 to DIULM150
Price
See green
pages
➊ Observe the maximum permissible fuse of the contactor with direct
device mounting.
For Sales and Support call KMparts.com (866) 595-9616
79
Overload Relays
Z5 Thermal Overload Relays
> Class 10A overload; trip response from 2 to 10 seconds
> Ambient compensated, bi-metallic overload tripping mechanism
> Phase failure sensitive to IEC/EN 60947
> Manual / Automatic reset button
> Built-in NO and NC auxiliary contact
Direct or Separate Mount Z5 Thermal Overload Relays for DILM185 – DILM250 Contactors
Short-Circuit
Protection
(Max 600V AC) ➊
Auxiliary
Contacts
Overload Relay
Adjustable
Setting Range
NO
NC
Fuses (A)
Circuit
Breaker (A)
50 – 70
1
1
250
250
Z5-70/FF250
210070
For use with...
Type
70 – 100
1
1
400 class J
400
Z5-100/FF250
210071
95 – 125
1
1
500 class J
500
Z5-125/FF250
210072
120 – 160
1
1
600 class J
600
Z5-160/FF250
210073
160 – 220
1
1
800 class L
800
Z5-220/FF250
210074
200 – 250
1
1
700 class L
600
Z5-250/FF250
210075
DILM185 to DILM250
DIULM185 to DIULM250
➊ Observe the maximum permissible fuse of the contactor with direct
device mounting.
80
Article
Number
For Sales and Support call KMparts.com (866) 595-9616
Price
See green
pages
Overload Relays
ZW7 Current Transformer Overload Relays
> Designed for heavy-duty starting applications having long
accelerating times
> Tripping time in 20 to 30 seconds under locked rotor conditions
> Ambient compensated, bi-metallic overload tripping mechanism
> Manual / Automatic reset button
> Built-in NO and NC auxiliary contact
Separate Mount ZW7 Current Transformer-Operated Thermal Overload Relays ➊
Auxiliary
Contacts
Overload Relay
Short-Circuit
Protection
Adjustable
Setting Range
NO
NC
42 – 63
1
1
ZW7-63
000245
60 – 90
1
1
ZW7-90
002618
Fuses (A)
For use with...
Circuit
Breaker (A)
Type
Article
Number
004991
1
ZW7-125
As required by associated ZW7-160
contactor. Overload relay
ZW7-240
is self-protecting.
ZW7-290
1
1
ZW7-400
045329
1
1
ZW7-540
047702
85 – 125
1
1
110 – 160
1
1
160 – 240
1
1
190 – 290
1
270 – 400
360 – 540
DILM50 to DILM580
DIULM50 to DIULM580
007364
009737
Price
See green
pages
052448
➊ The specified primary rated current applies to one cable loop. For lower rated
motor current, loop cable several times (e.g., ZW7-63 for 21 ... 31.5 A rated motor
current: loop cable twice.
For Sales and Support call KMparts.com (866) 595-9616
81
Overload Relays
Accessories
Accessories
Notes
For use with...
Type
Article
Number
Price
Bases (for separate mounting)
ZB32
ZB32-XEZ
278473
For snap mounting on EN 50 022 DIN-rail or screw mounting.
ZB65-XEZ
278474
M22-DZ-B-X6
271640
M22-DZ-B-GB14
254834
External Reset Button with Rod – 4X; IP65
Without button plate; add button plate from selection below
M22-DZ-X
254835
Red button plate; blank
M22-XD-R
216423
M22-XD-R-X0
218153
M22-XD-R-GB0
218194
Z5/FF250-XHB
215217
ZB65
See green
pages
Pushbuttons (for enclosed overload relays – mounting diameter: 22.5mm)
External Reset Button with Rod – 4X; IP65
Blue button plate with “R” inscription
External Reset Button with Rod – 4X; IP65
Blue button plate with “RESET” inscription
ZE...; Z5...; ZW7...
ZB12 – ZB150...
M22-DZ-X
Red button plate with white circle inscription
Red button plate with “STOP” inscription
See green
pages
Terminal Covers
Z5/FF250
-XHB
Overload relays for separate mounting
Z5-.../FF250
Z5-.../FF250
Z5/FF250
-XHB
DIL M400
-XHB
Overload relay fitted directly to contactor
DIL M185/
225/250
Z5/FF250
-XHB-Z
See green
pages
Direct mounting of
Z5-.../FF250 to
DILM185, DILM225,
DILM250
Z5/FF250-XHB-Z
215218
Z5-...FF250
Z5-FF250-XK-CNA
229314
Z5-.../FF250
Z5/FF250
-XHB-Z
Set of box terminals
One set of three terminals.
Wire size: #6 AWG - 350 MCM
UL Recognized/CSA Approved.
82
For Sales and Support call KMparts.com (866) 595-9616
See green
pages
Overload Relays
Technical Data
EC prototype test certification number:
ZE
Z5
Mounting position:
PTB 01 ATEX 3331
PTB 02 ATEX 3165
ZE
ZB12, ZB32, ZB65, Z5
Protection of single-phase and DC current motors:
1-pole
2-pole
Tripping characteristics:
These tripping characteristics are mean values of the spread at 20°C ambient temperature in a cold state. Tripping time depends on response
current. With devices at operating temperature, the tripping time of the overload relay reduces to approximately 25% of the read off value.
2h
100
60
40
20
10
6
4
2
1
40
20
10
6
4
2
1
0.6
ZW7
Minutes
Z5
3-phase
2-phase
1 1.5 2 3 4 6 8 1015 20
x Setting current
Highest level
Seconds
Minutes
2h
100
60
40
20
10
6
4
2
1
40
20
10
6
4
2
1
0.6
Seconds
Seconds
Minutes
2h
ZB12,
100
60
ZB32,
40
ZB65, ZE
20
10
6
4
2
1
40
3-phase
20
10
6
4
2-phase
2
1
0.6
1 1.5 2 3 4 6 8 1015 20
x Setting current
Lowest level
1 1.5 2 3 4 6 8 10 15 20
x Rated current
For Sales and Support call KMparts.com (866) 595-9616
83
Overload Relays
Technical Data
ZB12, ZB32
ZB65
OVERLOAD RELAYS
ZE
Z5-.../.IFF250
ZW7
General
Standards
Climatic proofing
Ambient temperature
IEC/EN 60947, VDE 0660, UL, CSA
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30
Open ➊
Enclosed ➊
Temperature compensation
Mounting position
Weight
Mechanical shock resistance half-sinusoidal shock 10ms
Degree of protection
[°C]
[°F]
[°C]
[°F]
-25/50 °C
-13/122 °F
-25/40 °C
-13/104 °F
-25/50 °C
-13/122 °F
-25/40 °C
-13/104 °F
[kg]
[g]
0.15
10
IP00
0.25
10
IP00
Protection against direct contact when actuated from front
-25/50 °C
-13/122 °F
-25/40 °C
-13/104 °F
Continuous
See page 83
0.09
10
IP20
Finger- and back-of-hand proof
-25/50 °C
-13/122 °F
-25/40 °C
-13/104 °F
-25/50 °C
-13/122 °F
-25/40 °C
-13/104 °F
1.8
10
IP00
0.95
10
IP00
Finger- and back-ofhand proof
With terminal cover
Main Contacts
Rated impulse withstand voltage
Overvoltage category / pollution degree
Rated insulation voltage
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between auxiliary contacts and main contacts
Between the main contacts
Overload relay setting range
Temperature compensation residual error > 20 °C
Short-circuit protection rating maximum fuse
Current heat loss (3 conductors)
Lower value of setting range
Upper value of setting range
Terminal capacity
Solid
Flexible without ferrules
Uimp
[V AC]
Ui
Ue
Flexible with ferrule
[V AC]
6000
III/3
690
6000
III/3
690
6000
III/3
690
8000
III/3
1000
6000
III/3
690
[V AC]
690
690
690
1000
690
[V AC]
[V AC]
440
440
0.1 – 32
≤ 0.25
See page 78
440
440
6 – 75
≤ 0.25
See page 79
300
300
0.1 – 9
≤ 0.25
See page 77
440
440
50 – 250
≤ 0.25
See page 80
440
440
40 – 540
–
2.5
6
3
7.5
2.5
6
16
28
3
10
2 x (1 – 6)
–
1 x 25
2 x (1 – 10) ➋
–
–
–
14 – 2
–
–
–
M6
3.5
2 x (0.75 – 2.5)
–
–
–
–
–
2 x (0.5 – 1.5)
–
–
[Nm]
2 x (1 – 6)
–
2 x (1 – 4)
2 x (1 – 6) ➍
–
–
–
14 – 8
–
–
–
M4
1.8
–
–
–
18 – 14
–
–
–
M3.5
1.2
6 x 15 x 0.8 ➎
20 x 3
–
M8 x 25
24
–
–
–
–
–
–
27
–
–
[Size]
[mm]
[mm]
2
1x6
–
2
1x6
–
2
0.8 x 5.5
–
–
–
13
–
–
–
[A]
[% / K]
[W]
[W]
[mm2]
[mm2]
[mm2]
Stranded
Flexible with cable lug
Stranded with cable lug
Solid or stranded
Flat conductor
Number of segments x width x thickness
Busbar
Width
Push-through opening
0
Terminal screw
Tightening torque
Tools
Pozidriv screwdriver
Standard screwdriver
Hexagon socket-head screw
SW
[mm ]
[mm2]
[mm2]
[AWG]
[mm]
[mm]
[mm]
2
➊ Ambient temperature: operating range to IEC/EN 60947, PTB: -5 °C to +50 °C
➍ 6 mm2 flexible with ferrules to DIN 46228
➎ Fixing with box terminals
(23 °F to 122 °F)
➋ Main contacts terminal capacity solid and stranded conductors with ferrules:
When using 2 conductors, use identical cross-section.
➌ With overload relay in conjunction with a transformer as required for the contactor
84
95
120
250 MCM
For Sales and Support call KMparts.com (866) 595-9616
➌
Overload Relays
Technical Data
ZB12, ZB32
ZB65
OVERLOAD RELAYS
ZE
Z5-.../.IFF250
ZW7
6000
III/3
6000
III/3
6000
III/3
6000
III/3
6000
III/3
[Nm]
2 x (0.75 – 4)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
0.8 – 1.2
2 x (0.75 – 4)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
0.8 – 1.2
2 x (0.75 – 2.5)
2 x (0.5 – 1.5)
2 x (18 – 12)
M3.5
0.8 – 1.2
2 x (0.75 – 4)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
0.8 – 1.2
2 x (0.75 – 4)
2 x (0.75 – 2.5)
2 x (18 – 12)
M3.5
0.8 – 1.2
[Size]
[mm]
[V AC]
2
1x6
500
2
1x6
500
2
0.8 x 5.5
690
2
1x6
500
2
1x6
500
[V AC]
500
500
500
500
500
[V AC]
[A]
240
6
240
6
300
6
240
6
240
6
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
[A]
1.5
1.5
1.5
1.5
1.5
[A]
1.5
1.5
1.5
1.5
1.5
[A]
0.5
0.5
0.5
0.5
0.5
[A]
0.5
0.5
0.3
0.5
0.5
[A]
1.5
1.5
1.5
1.5
1.5
[A]
1.5
1.5
1.5
1.5
1.5
[A]
0.9
0.9
0.7
0.9
0.9
[A]
0.8
0.8
0.5
0.8
0.8
Ie
Ie
Ie
Ie
[A]
0.9
0.9
0.9
0.9
0.9
[A]
0.75
0.75
0.75
0.75
0.75
[A]
0.4
0.4
0.4
0.4
0.4
[A]
0.2
0.2
0.2
0.2
0.2
[A gG/gL]
6
6
4
6
6
Auxiliary and control circuit connections
Uimp
Rated impulse withstand voltage
Overvoltage category / pollution degree
Terminal capacity
Solid
Flexible with ferrule
Solid or stranded
Terminal screw
Tightening torque
Tools
Pozidriv screwdriver
Standard screwdriver
Auxiliary circuit rated insulation voltage
[mm2]
[mm2]
[AWG]
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between the auxiliary contacts
Conventional thermal current
Rated operational current
AC-15
Make contact
120 V
240 V
415 V
500 V
Break contact
120 V
240 V
415 V
500 V
DC-13 L/R ≤ 15 ms ➊
24 V
60 V
110 V
220 V
Short-circuit rating without welding
Max. fuse
[V]
Ui
Ue
Ith
UL / CSA Data
Rated voltage
[V AC / DC]
600 / 300
600 / 300
B600
same
polarity;
B600
same polarity;
[AC]
B300 - opp. polarity B300 - opp. polarity
[DC]
R300
R300
Pilot duty rating
300 / 300
D300 ➋
R300
600 / 300
600 / 300
B600 - same polarity; B600 - same polarity;
B300 - opp. polarity B300 - opp. polarity
R300
R300
➊ Rated operational current: Making and breaking conditions to DC-13, L/R constant
as stated.
➋ Additional rating of .6A at 600V AC and 1.5A at 240V AC.
For Sales and Support call KMparts.com (866) 595-9616
85
Overload Relays
Dimensions
Overload Relays
35.5
48
29.5
39.5
ZB12/ZB32
65
45
83
ZB65
20.3
79.2
51.5
95.5
60
102
ZB32-XEZ
ZB65-XEZ
c1
b
b1
a
5
ZB32
ZB65
45
60
b
85
86
b1
42.5
42.5
c
90.5
112
c1
58.3
80.5
c2
3.8
4.7
c2
c
16.5
a
86
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
Dimensions
Overload Relays
ZE
49
106
5.5
58
32
45
>5
=
Z5-.../FF250
110
121
96
144
48
25
5
�
94
169
144
74
�
7
�
111
7
�
16.5
� = OFF
� = RESET / ON
11
128
For Sales and Support call KMparts.com (866) 595-9616
87
Overload Relays
Dimensions
Current Transformer-operated Overload Relay
ZW7-...
185
1.5
7.5
4.3
44
M4
�
55
85
26
26
55
44
33
71
21
8
185
�
159
� = RESET / ON
172 – 250
200
65
71
65
90˚
90˚
90˚
27
88
For Sales and Support call KMparts.com (866) 595-9616
ZEV electronic overload relay
The ultimate motor protection for applications to 820A
Moeller’s ZEV electronic overload relay offers the ultimate motor protection at
an economical price. The base unit protects against overloads, phase failure and
phase imbalance in motors from 1 to 820A. Thermistor connections and optional
ground-fault protection make the ZEV a great choice for virtually all applications
where sophisticated, yet economical motor protection is required.
R
The new standard in protection
Newly-developed sensor systems and tripping units make the ZEV electronic overload relay the “top-of-the-range” in motor protection. Enhanced tripping classes
provide reliable protection for motors with run-up times as long as 40 seconds.
Trip classes are selectable from 5 to 40 seconds, allowing precise protection for a
range of applications.
Additional features and options
Optional core-balance transformers detect ground faults quickly, while an integrated thermistor connection makes it easy to upgrade to a full motor-protection
system. Check out other great features of the ZEV relay listed on the left.
>Early warning of an overload
>Internal fault detection
>Ambient temperature compensation
Easy to operate
A built-in LCD guides you through set-up and operation. In the event of a fault,
the display indicates the origin – speeding the process of troubleshooting and repair. Configurable auxiliary contacts may be added for communication of ground
faults, thermistor trips, internal faults or early warning of an overload.
Flexibility for multiple environments
>Test / OFF button
>Automatic & manual reset
The multi-voltage module automatically adapts to different voltages from 24240V AC/ DC, providing a fast and flexible connection to all conventional control.
>Trip indication & trip-free release
Compact design
>Integrated NO & NC contact
Ring-type current sensors make the ZEV a great choice for protection of even small motors. There’s no need for main current wiring or back pan drilling. The sensor is installed
quickly and easily with Velcro fasteners. Compared to conventional transformers, this
design is up to 58 times smaller, saving valuable space in the control panel.
Safety and approvals
The ZEV electronic overload relay is touch safe to IP20 specifications. It meets approval standards of UL, CSA, IEC/EN 60 947 and VDE 0660.
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
ZEV Electronic Motor Protective Relays
>Electronic device protects against overloads, phase failure, phase
imbalance, internal fault, thermistor tripping and optional ground-fault
>Eight tripping classes from Class 5 to Class 40 protection
>LCD display guides set-up and ensures straightforward operation during
a fault condition
>DIN-rail or optional screw mounting
ZEV Electronic Motor-Protective Relays
Overload Relay
Adjustable
Setting Range
Length
mm
Diameter
mm
For use with...
Fault
Current
Type
Article
Number
Price
ZEV Electronic Motor-Protective Relay
1 – 820
–
–
DILEM – DILM820
–
ZEV
209634
1 – 25
–
6
DILEM; DILM7 – DILM25
–
ZEV-XSW-25
209635
See
green
pages
Current Sensors
3 – 65
–
13
DILM32 – DILM50
–
ZEV-XSW-65
209636
10 – 145
–
21
DILM65 – DILM115
–
ZEV-XSW-145
209637
40 – 820
–
110
DILM185 – DILM820
–
ZEV-XSW-820
209641
–
200
–
ZEV-XVK-20
209643
400
–
–
ZEV-XVK-40
209644
–
800
–
ZEV-XSW-25
ZEV-XSW-65
ZEV-XSW-145
ZEV-XSW-820
–
–
–
ZEV-XVK-80
209645
–
–
–
–
–
–
–
0.3
0.5
1
0.5
1
0.5
1
SSW40-0,3
SSW40-0,5
SSW40-1
SSW65-0,5
SSW65-1
SSW120-0,5
SSW120-1
028286
028305
028306
028307
028316
028319
028321
See green
pages
ZEV
ZEV-XSW-25
ZEV-XSW-65
ZEV-XSW-145
–
ZB4-101-GF1
061360
See green
pages
See green
pages
Connecting Cables
–
See green
pages
SSW Core-Balance Transformers (for ground-leakage monitoring)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
40
40
40
65
65
120
120
Mounting Adapter
Enables screw mounting of ZEV and Current Sensors to back pan
Ordering Instructions
★ A complete ZEV Electronic Motor Protective Relay consists of:
–One ZEV base unit
– One Current Sensor
– One Connecting Cable
90
★ For optional ground-leakage protection, select one
Core Balance Transformer
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
Selection Aids
L1
L2
L3
N
Menu
Class
Z1
5 10 15 20
25 30 35 40
ON
OFF
Z2
C1
C2
Y1
Y2
A1
Free
parameter
1
95 97 05 07
A2
~ =
Reset
e
0 – 820 A
Fault
!
> 105%
L1 L2 L3
l
P
%
Class
M
3~
Free
parameter 1
Free
parameter 2
T1
Mode
Up
T2
Test
Reset
Down
IF 1)
Reset
Free
parameter
1
Hand Auto
!
> 105%
ON
IF 1)
OFF
96 98 06 08
1)
Inputs
IF: internal fault
Outputs
A1/A2
Rated control voltage
95 / 96
NC contact for overload / thermistor
T1/T2
Thermistor sensor
97 / 98
NO contact for overload / thermistor
C1/C2
SSW core-balance transformers
05 / 06
NC contact freely assignable
Y1/Y2
Remote reset
07 / 08
NO contact freely assignable
Switchgear and cable sizing corresponding to the respective starting inertia (CLASS)
The switchgear is designed for “CLASS 10” in normal and overload operation. To ensure that the switchgear (circuit-breaker and contactor)
as well as the cables are not overloaded with extended tripping times, they must be over-dimensioned accordingly. The rated operational
current Ie for switchgear and cables can be calculated with the following current factor while taking the tripping class into account:
Tripping Class
Class 5
Class 10
Class 15
Class 20
Class 25
Class 30
Class 35
Class 40
1.00
1.00
1.22
1.41
1.58
1.73
1.89
2.00
Current factor for rated operational
current Ie
Relays with integrated sensor
With the ZEV-XSW-25 to ZEV-XSW-145 push-through sensors, the motor supply leads for each phase are pushed through the respective
push-through openings. On motor currents which are less than 1 A, the motor supply leads with the ZEV-XSW-25 are inserted in loops. The
number of loops depends on the rated motor current involved.
Number of loops n
4
3
2
Rated motor current IN
A
0.31 – 0.4
0.41 – 0.62
0.63 – 1.24
Current settings on relay IE between lowest and
highest value
A
1.24 – 1.6
1.23 – 1.86
1.26 – 2.48
The current setting IE of the device is calculated as: IE = n x IN
For Sales and Support call KMparts.com (866) 595-9616
91
Overload Relays
Selection Aids
Tripping times for ZEV electronic motor-protective relay
Tripping class, can be selected
Class
Tripping time in s (± 20 %)
Setting current IE
5
10
15
20
25
30
35
40
With 3-pole symmetric loading from cold state
x3
11.3
22.6
34
45.3
56.6
67.9
79.2
90.5
x4
8
15.9
23.9
31.8
39.8
47.7
55.7
63.6
x5
6.1
12.3
18.4
24.6
30.7
36.8
43
49.1
x6
5
10
15
20
25
30
35
40
x 7.2
4.1
8.2
12.3
16.4
20.5
24.5
28.6
32.7
x8
3.6
7.3
10.9
14.6
18.2
21.9
25.5
29.2
x 10
2.9
5.7
8.6
11.5
14.4
17.2
20.1
23
Recovery time after overload trip
Overview of the recovery time
in minutes
Class
5
10
15
20
25
30
35
40
trecovery
5
6
7
8
9
10
11
12
(min)
With unbalance > 50% and with phase failure, the trip occurs in 2.5s.
Thermistor tripping
Rated trip resistance
R = 3200 Ω ± 15%
Recovery resistance
R = 1500 Ω + 10%
Total PTC thermistor resistance ∑ RK ≤ 1500 Ω
at RK ≤ 250 Ω per sensor: 6 sensors
at RK ≤ 100 Ω per sensor: 9 sensors
Ready to respond after trip at 5 K under response temperature
Test button tripping time: 5s
EC prototype test certification number: PTB 01 ATEX 3233
For protection of motors in EEx e area, also order AWB2300-1433G
“ZEV motor-protective system, Overload monitoring of motors in
EEX e areas”.
Tripping characteristics:
These tripping characteristics are mean values of the spread at 20°C
ambient temperature in a cold state. Tripping time depends on response current. With devices at operating temperature, the tripping
time of the overload relay reduces to approximately 25% of the read
off value.
2h
Minutes
100
15
10
5
Seconds
2
1
92
ZEV 3-pole
With a phase failure
or unbalance > 50%,
the ZEV will trip
within 2.5 seconds.
CLASS 40
35
30
25
20
20
10
15
7
10
5
3 CLASS 5
2
1
1
2 3 4 5 6 7 8 910
x Setting current
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
Technical Data
ELECTRONIC
ZEV
ELECTRONIC
ZEV
General
Auxiliary and control circuit connections (continued)
IEC/EN 60947, VDE 0660,
UL, CSA
Damp heat, constant, to IEC
60068-2-78; Damp heat,
cyclic, to IEC 60068-2-30
Standards
Climatic proofing
Ambient temperature
Enclosed ➊
Storage
Temperature compensation
Mounting position
Weight
Mechanical shock resistance half-sinusoidal shock 10ms
Degree of protection
Protection against direct contact when actuated from front
-25/60 °C
-13/140 °F
-25/40 °C
-13/104 °F
40 – 80 °C
104 – 176 °F
Continuous
As required
[kg]
See page 0.20
[g]
15
IP20
Finger- and back-of-hand
proof
[Nm]
1 – 820 ➐
With overload relay in
conjunction with a
transformer as required
for the contactor
M3.5
0.8
[Size]
[mm]
1
0.8 x 5.5
[A]
Short-circuit protection rating maximum fuse
Terminal screw
Tightening torque
Tools
Pozidriv screwdriver
Standard screwdriver
Uimp
[V]
[Nm]
[Size]
[mm]
1
0.8 x 5.5
[mm2]
Flexible with ferrule
[mm ]
Solid or stranded
Terminal screw
Tightening torque
Tools
Pozidriv screwdriver
Standard screwdriver
[AWG]
2
➊ Ambient temperature: operating range to IEC/EN 60947, PTB: -5 °C to +50 °C
(23 °F to 122 °F)
➋ Rated operational current: Making and breaking conditions to DC-13, L/R constant
as stated.
➌ See overlay “Fuses” for short-circuit rating time/current characteristic
➍ Terminal capacities, auxiliary and control circuits, solid, flexible with ferrules: With
connection of conductors only the following combinations are permissible: 0.5
and 0.75mm2 , 0.75 and 1 mm2 , 1 and 1.5 mm2
[V AC]
Ith
[A]
240 ➎
6
Ie
Ie
Ie
Ie
Ie
Ie
Ie
Ie
[A]
3➏
[A]
[A]
3➏
–
[A]
–
[A]
3
Ie
Ie
Ie
Ie
[A]
1
[A]
–
[A]
–
[A]
–
P max.
[W]
2.5
[A gG/gL]
6
120 V
500 V
Break contact
120 V
240 V
415 V
500 V
DC-13 L/R ≤ 15 ms ➋
24 V
60 V
110 V
220 V
Power consumption
Short-circuit rating without welding
Max. fuse ➌
Pick-up and drop-out values
AC operated
DC operated
[A]
3
[A]
–
[A]
–
[x Uc]
0.85 – 1.1
[x Uc]
0.85 – 1.1
UL / CSA
Rated Voltage
4000
III/3
1 x (0.5 – 2.5)
2 x (0.5 – 1.5) ➍
1 x (0.5 – 2.5)
2 x (0.5 – 1.5) ➍
1 x (18 – 14)
M3.5
0.8
Solid
240
415 V
Auxiliary and control circuit connections
Rated impulse withstand voltage
Overvoltage category / pollution degree
Terminal capacity
250
[V AC]
240 V
Main Contacts
Overload relay setting range
[V AC]
Conventional thermal current
Rated operational current
AC-15
Make contact
[°C]
[°F]
[°C]
[°F]
[°C]
[°F]
Open ➊
Ui
Rated operational voltage
Ue
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between the auxiliary contacts
Auxiliary circuit rated insulation voltage
Pilot Duty
[V AC/DC]
[DC]
600 / 300
B600 Same polarity
B300 Opposite polarity
R300
[Ω]
[Ω]
[Ω]
1500
2720 – 3680
1500 – 1650
[AC]
Thermistor Protection
Total resistance (cold)
Response value
Reset range
Recovery time
Overload
See page 92
5 K under response
temperature
Immediate
Thermistor tripping
Ground-fault protection
➎ Safe isolation: Up to 240 V depending on contact assignment between mains and
outputs no potential isolation to thermistor and summation current transformer
input and current sensor (neighboring contacts: Us = 127 V)
➏ Rated operational current AC-15: contacts 95/96 and 97/98 3 A (contactor control), contacts 05/06 and 07/08 1.5 A (auxiliary contacts)
➐ Overload relay main contact setting range: setting range dependant on current
sensor
➑ Ambient temperature open and enclosed: limited readability of the LDC display at
< -15 °C (5 °F)
For Sales and Support call KMparts.com (866) 595-9616
93
Overload Relays
Technical Data
ZEV-XSW-25
CURRENT SENSORS
ZEV-XSW-65
ZEV-XSW-145
ZEV-XSW-820
General
Standards
Climatic proofing
Ambient temperature
IEC/EN 60947, VDE 0660, UL, CSA
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30
[°C]
[°F]
[°C]
[°F]
[°C]
[°F]
Open
Enclosed
Storage ➊
Temperature compensation
Mounting position
Weight
Mechanical shock resistance half-sinusoidal shock 10ms
Degree of protection
Protection against direct contact when actuated from front
-25 / 60 °C
-13 / 140 °F
-25 / 40 °C
-13 / 104 °F
-40 / 80 °C
-40 / 176 °F
-25 / 60 °C
-13 / 140 °F
-25 / 40 °C
-13 / 104 °F
-40 / 80 °C
-40 / 176 °F
-25 / 60 °C
-13 / 140 °F
-25 / 40 °C
-13 / 104 °F
-40 / 80 °C
-40 / 176 °F
-25 / 60 °C
-13 / 140 °F
-25 / 40 °C
-13 / 104 °F
-40 / 80 °C
-40 / 176 °F
Continuous
As required
[kg]
[g]
0.21
15
IP20
0.37
0.45
15
15
IP20
IP20
Finger- and back-of-hand proof
0.30
15
IP20
Uimp
[V AC]
[V AC]
➋
➋
➋
➋
8000
Ui
Ue
➋
➋
➋
➋
Main Contacts
Rated impulse withstand voltage
Overvoltage category / pollution degree
Rated insulation voltage
Rated operational voltage
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between busbar and sensor
Overload relay setting range
Short-circuit protection rating maximum fuse
Push-through opening
[V AC]
[V AC]
[A]
0
[mm]
➋
➋
➋
➋
(23 °F to 122 °F)
➋ The main current parameters are defined by the main current wiring which is
used.
94
1000
–
–
–
500
1 – 25
3 – 65
10 – 145
40 – 820
With overload relay in conjunction with a transformer as required for the contactor
6
13
21
110
➊ Ambient temperature: operating range to IEC/EN 60947, PTB: -5 °C to +50 °C
III/3
1000
For Sales and Support call KMparts.com (866) 595-9616
Overload Relays
Dimensions
Overload Relays
ZEV
7.2
4.5
78
103
59.2
37
93
29
75
45
Current Sensors
ZEV-XSW-...
a1
78
103
35
37
93
4.5
c
a
d2
35
d2
8
ZEV-XSW-...
25
65
145
a
45
70
90
a1
24
49
68
c
50
58
65
d1
6
13
21
d2
11.2
19
26
d1
For Sales and Support call KMparts.com (866) 595-9616
95
Overload Relays
Dimensions
Overload Relays
ZEV + ZEV-XSW-...
ZEV + ZEV-XSW-...
25
65
145
c1
120
128
134
c1
Current Sensor
35
~150
ZEV-XSW-820
26
37
3
125
Core-balance Transformer
SSW40-...
SSW65-...
SSW120-...
a
a1
e
b1
b
d
a2
c
96
SSW...
40-...
65-...
120-...
a
64
75
86.5
a1
50
60
70
a2
38
43
54.5
b
100
124
200
b1
80
100
170
c
86
112
205
d
4.5
4.5
4.5
e
40
65
120
For Sales and Support call KMparts.com (866) 595-9616
EMT thermistor protection relays
For motors with imbedded P.T.C. thermistors
Moeller’s EMT Thermistor Protection Relays are specifically designed to monitor
positive temperature coefficient (PTC) thermistors embedded in the motor windings. Typically used in “mission critical” applications, PTC thermistors, coupled with
EMT Thermistor Protection Relays provide extremely precise thermal feedback and
increased motor protection.
R
Three designs to choose
All EMT relays feature automatic reset with Power-ON and fault-indicating LED. Depending on the model chosen, the following additional features are also available:
• Selectable manual or automatic reset
• Remote reset
• Short circuit recognition in the sensor circuit
• Reliable fault signaling even under supply voltage failure
(zero voltage safety)
• Short circuit recognition and zero-voltage safety can be switched off
• Test button
Universal input voltage
Moeller EMT Thermistor Protection relays accept voltage inputs of 24 – 240V AC
50-60Hz; and 24 – 240V DC making them ideal for the majority of normal control
circuit applications.
>Extremely accurate overload
protection
Zero-voltage safety
>Universal supply voltage
The EMT6-DBK includes fault signaling even with a loss of supply voltage. This
important safety feature stores the condition of the relay prior to the loss of power.
When power is restored, the relay’s output and LED fault indication retain state
and act accordingly.
>Choose from basic to advanced
protection
Feature Comparison
EMT-6
EMT6-DB
EMT6-DBK
LED power-ON and fault indication
✔
✔
✔
Thermal overload protection (from PTC sensors)
✔
✔
✔
Automatic reset
✔
✔
✔
Universal control voltage
✔
✔
✔
✔ (option)
✔ (option)
✔
Manual or automatic reset
✔
✔
Remote or local reset
✔
✔
Test button
✔
✔
Short circuit recognition in the sensor circuit
Fault signaling with loss of supply voltage (zero-voltage safety)
✔
Short circuit recognition and zero voltage safety can be turned off
✔
For Sales and Support call KMparts.com (866) 595-9616
Thermistor Overload Relays
Series EMT Thermistor Relays
> For protection of motors with P.T.C. thermistors embedded in
their windings
> LED display of operational status
> Manual / Automatic reset or remote reset available
Thermistor Protection Relays
IEC Rated
Operating Current
Protection Relay
Description
UL/CSA
Pilot
AC-15
AC-14
Duty
220–240 V 380–400 V Rating
Rated
Operational
Voltage Range
Type
Article
Number
Price
Automatic Reset
•Automatic RESET
•Power ON and fault indicating LED display
3
3
B 300
24 – 240 V 50/60 Hz,
24 – 240 V DC
EMT6
066166
•Automatic RESET
•Power ON and fault indicating LED display
•Short-circuit recognition in the sensor
circuit
3
3
B 300
24 – 240 V 50/60 Hz,
24 – 240 V DC
EMT6-K
269470
•Automatic RESET
•Power ON and fault indicating LED display
3
3
B 300
230 V 50/60 Hz
EMT6(230V)
066400
•Manual or automatic RESET
•For manual or remote resetting
•Test button
•Power ON and fault indicating LED display
3
3
B 300
24 – 240 V 50/60 Hz,
24 – 240 V DC
EMT6-DB
066167
•Manual or automatic RESET
•For manual or remote resetting
•Test button
•Power ON and fault indicating LED display
•Short-circuit recognition in the sensor
circuit
3
3
B 300
24 – 240 V 50/60 Hz,
24 – 240 V DC
EMT6-KDB
269471
•Manual or automatic RESET
•For manual or remote resetting
•Test button
•Power ON and fault indicating LED display
3
3
B 300
230 V 50/60 Hz
EMT6-DB(230V)
066401
3
3
B 300
24 – 240 V 50/60 Hz,
24 – 240 V DC
EMT6-DBK
066168
See green
pages
Manual + Automatic Reset
See green
pages
Manual + Automatic Reset / Multi-function Device
•Manual or automatic reset / Multi-fucntion
device
•Short-circuit recognition in the sensor
circuit
•Reliable fault signalling even under supply
voltage failure (zero-voltage safety)
•For manual or remote resetting
•Test button
•Short-circuit recognition and zero-voltage
safety can be switched off
•Power ON and fault indicating LED display
LED
display
Flow
diagrams
Notes
green
Supply voltage is applied
red
Device has tripped
red
Device has tripped/short
circuit in the sensor circuit
98
For Sales and Support call KMparts.com (866) 595-9616
See green
pages
Thermistor Overload Relays
Series EMT Thermistor Relays
Accessories
Accessories
Notes
For use with...
Type
Article
Number
Price
095853
See green
pages
Screw Adapter
Without the adaptor the EMT 6 is suitable for 35mm DIN-rail
mounting only. The adapter enables the relay to become a panel
mounted device using conventional screws.
CS-TE
EMT6
Application Notes
~
L+
EMT6-K, EMT6-(K)DB, EMT6-DBK
Auto
21
A1
Power
13
Tripped
A1/A2
T1/T2
US
T1 T2
A2
22
Can be snap-mounted on an EN 50 022 35mm DIN rail.
3,6 KΩ
1,6 KΩ
0Ω
At Rk ≤ 250 Ω per sensor: 6 sensors,
At Rk ≤ 100 Ω per sensor: 9 sensors in the winding
(provided by user)
Maximum length of thermistor cable 250 m (unscreened);
Total PTC thermistor resistance Σ Rk ≤ 1500 Ω
14
13–14, 21–22
Tripped LED
PTC
N~
~
L+
EMT6-(K)DB, EMT6-DBK
Manual
Y1
A1
Power
With the EMT6, EMT6(230V), EMT6-DB and EMT6DB(230V) an additional short-circuit protection in the
sensor circuit with current monitor is to be provided.
Y2
21
Sensor characteristic values at Us and +20 °C
EMT6…
13
A1/A2
Tripped
T1, T2 short-circuited
3,6 KΩ
T1/T2
4kΩ
1,6 kΩ
0Ω
US
T1-T2 open
T1 T2
A2
22
14
Function
EMT6-DBK
Zero-voltage safe operation
Y2
Y3
Y4
21
13
Tripped
A1/A2
T1/T2
US
–
Y1 – Y 3
Y1 – Y 4
12000
Resistance [ ]
Y1
Power
0.8
Disconnection via jumper
Short-circuit recognition
Zero-voltage safety
N~
A1
3
5.1
Functions that can be disconnected on EMT6-DBK:
Tripped LED
L~
+
1.9
Y1/Y2, RESET
13–14, 21–22
PTC
–
3.6 K
1.6 K
0
4000
1650
3600
IECTripping range
1600
Resetting
range
Tripping
Reset
750
Y1/Y2, RESET
T1 T2
A2
22
14
Tolerance limits
Temperature [ºC]
13–14, 21–22
PTC
60
Tripped LED
Short-circuit
NAT NAT
–20
–5
N~
–
For Sales and Support call KMparts.com (866) 595-9616
NAT
NAT NAT
+5
+15
99
Thermistor Overload Relays
Technical Data
THERMISTOR OVERLOAD RELAY
EMT6
General
Standards
EC Prototype test certification number
Climatic proofing
Ambient temperature
Open
Enclosed
Storage
Mounting position
Weight
Mechanical shock resistance half-sinusoidal shock 10ms
Degree of protection
Protection against direct contact when actuated from front
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between the contacts
Between contacts and supply voltage
IEC/EN 60947, VDE 0660, UL, CSA
PTB 02 ATEX 3162
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclic, to IEC 60068-2-30
[°C / °F]
[°C / °F]
[°C / °F]
-25/60 °C / -13/140 °F
-25/45 °C / -13/113 °F
-45/60 °C / -49/140 °F
As required
0.13
10
IP20
Finger- and back-of-hand proof
[kg]
[g]
[V AC]
[V AC]
250
250
[V AC]
6000
III/3
[mm2]
1 x 2.5; 2 x (0.5 – 1.5)
Auxiliary and Control Circuit Connections
Uimp
Rated impulse withstand voltage
Overvoltage category / pollution degree
Auxiliary and control circuit terminal capacity
Solid
Flexible with ferrule
[mm ]
Solid or stranded
Terminal screw
Tightening torque
Tools
Pozidriv screwdriver
Standard screwdriver
[AWG]
2
[Nm]
1 x 2.5; 2 x (0.5 – 1.5)
20 – 14
M3.5
1.2
[Size]
[mm]
2
1x6
Ui
[V]
400
Ie
Ie
Ie
Ie
Ie
Ie
[A]
3
[A]
3
[A]
3
[A]
1
[A]
3
[A]
1
gG/gL
[A]
6
Ui
Ue
[V]
240
[V]
[x Ue]
240 ➊
0.85 – 1.1
[VA]
[W]
[Ω]
[Ω]
3.5
2
≥ 3600
≥ 1600
Auxiliary Circuit
Rated insulation voltage
Rated operational current
AC-14
Make contact
415 V
Break contact
415V
Make contact
240 V
AC-15
415V
Break contact
240 V
415 V
Max. short-circuit protective device
Fuse
Control Circuit
Rated insulation voltage
Rated operational voltage
Pick-up and drop-out values
Power consumption
AC
DC
Trip at approx.
Recovery at approx.
➊ EMT6(-DB)230 V; Ue = 230 V
100
For Sales and Support call KMparts.com (866) 595-9616
Thermistor Overload Relays
Dimensions
Thermistor Protection Relays
78
EMT6-(-DB)
EMT6-DBK
22.5
102
For Sales and Support call KMparts.com (866) 595-9616
101
price list
Use only with Publication DILM-CAT-USA
(Article No: 695001)
For Sales and Support call KMparts.com (866) 595-9616
Price List
Numerical Listing by Article Number
Article No.
000245
002397
002618
004991
007364
009737
010006
010040
010064
010080
010112
010113
010134
010136
010168
010197
010208
010213
010213
010224
010240
010245
010256
010288
010293
010304
010309
010320
010325
010327
010336
010343
010343
010463
010482
010496
012701
012701
012811
012844
013166
013194
014263
014285
014300
014333
014376
014432
014479
014518
014565
014708
014752
014776
017083
019095
026634
028286
028305
028306
028307
028316
028319
Type
ZW7-63
13DILE
ZW7-90
ZW7-125
ZW7-160
ZW7-240
DILEM-10(24V60HZ)
DILEM-01-G(60VDC)
02DILEM
11DILEM
22DILEM
MVDILE
DILEM-01(24V60HZ)
DILEM-01-G(110VDC)
DILEM-01-G(220VDC)
DILEM-10(600V60HZ)
20DILE
DILEM-10-G(24VDC)
DILEM-10-G(24VDC)
11DILE
02DILE
DILEM-10-G(48VDC)
04DILE
22DILE
DILEM-10-G(60VDC)
40DILE
DILEM-10-G(110VDC)
VGDILE48
DILEM-10-G(220VDC)
DILEM-01(600V60HZ)
VGDILE250
DILEM-01-G(24VDC)
DILEM-01-G(24VDC)
VGDILE415
HDILE
DILEM-01-G(48VDC)
DILEM4-G(24VDC)
DILEM4-G(24VDC)
DILEM4-G(48VDC)
DILEM4-G(60VDC)
DILEM4-G(110VDC)
DILEM4-G(220VDC)
ZE-0,16
ZE-0,24
ZE-0,4
ZE-0,6
ZE-1,0
ZE-1,6
ZE-2,4
ZE-4
ZE-6
ZE-9
ZE-12
DILEM4(24V60HZ)
DIL0MK-10(24V60HZ)
P1DILEM
V0DILE
SSW40-0,3
SSW40-0,5
SSW40-1
SSW65-0,5
SSW65-1
SSW120-0,5
Page
81
17
81
81
81
81
26
26
17
17
17
20
26
26
26
26
17
10
26
17
17
26
17
17
26
17
26
18
26
26
18
10
26
18
22
26
26
11
26
26
26
26
77
77
77
77
77
77
77
77
77
77
77
26
27
21
19
90
90
90
90
90
90
Discount
Article No.
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A20
A20
A20
A20
A20
A20
A20
A20
028321
040814
044264
045329
046320
047019
047020
047020
047023
047026
047030
047031
047031
047034
047037
047041
047042
047042
047045
047048
047051
047052
047052
047055
047058
047061
047062
047062
047065
047068
047702
048912
049823
049824
051782
051783
051783
051786
051789
051791
051792
051792
051795
051798
051800
051801
051801
051804
051807
052448
059794
059904
061360
062276
066166
066167
066168
066400
066401
076733
079594
079642
079680
List Price Schedule
530
32
530
600
600
725
72
90
20
20
32
20
72
90
90
72
32
90
90
20
20
90
32
32
90
32
90
28
90
72
28
90
90
28
6
90
90
90
90
90
90
90
72
72
72
72
72
72
72
72
72
72
72
72
159
25
0.60
335
335
335
445
445
1172
Type
SSW120-1
DIL2MK-10(24V60HZ)
RCDILE48
ZW7-400
RCDILE250
DIL00MK-11(48V60HZ)
DIL00MK-11(120V60HZ)
DIL00MK-11(120V60HZ)
DIL00MK-11(240V6HZ)
DIL00MK-11(480V60HZ)
DIL00MK-02(48V60HZ)
DIL00MK-02(120V60HZ)
DIL00MK-02(120V60HZ)
DIL00MK-02(240V6HZ)
DIL00MK-02(480V60HZ)
DIL0MK-10(48V60HZ)
DIL0MK-10(120V60HZ)
DIL0MK-10(120V60HZ)
DIL0MK-10(240V6HZ)
DIL0MK-10(480V60HZ)
DIL1MK-10(48V60HZ)
DIL1MK-10(120V60HZ)
DIL1MK-10(120V60HZ)
DIL1MK-10(240V6HZ)
DIL1MK-10(480V60HZ)
DIL2MK-10(48V60HZ)
DIL2MK-10(120V60HZ)
DIL2MK-10(120V60HZ)
DIL2MK-10(240V6HZ)
DIL2MK-10(480V60HZ)
ZW7-540
31DILE
22DDILE
11DDILE
DILEM-10(48V60HZ)
DILEM-10(120V60HZ)
DILEM-10(120V60HZ)
DILEM-10(240V60HZ)
DILEM-10(480V60HZ)
DILEM-01(48V60HZ)
DILEM-01(120V60HZ)
DILEM-01(120V60HZ)
DILEM-01(240V60HZ)
DILEM-01(480V60HZ)
DILEM4(48V60HZ)
DILEM4(120V60HZ)
DILEM4(120V60HZ)
DILEM4(240V60HZ)
DILEM4(480V60HZ)
ZW7-290
DIL00MK-11(24V60HZ)
BT483
ZB4-101-GF1
BT2571
EMT6
EMT6-DB
EMT6-DBK
EMT6(230V)
EMT6-DB(230V)
DIL00MK-02(24V60HZ)
DILEM-10-G(12VDC)
DILEM-01-G(12VDC)
DILEM4-G(12VDC)
For Sales and Support call KMparts.com (866) 595-9616
Page
90
27
18
81
18
27
13
27
27
27
27
13
27
27
27
27
13
27
27
27
27
13
27
27
27
27
13
27
27
27
81
17
17
17
26
10
26
26
26
26
10
26
26
26
26
26
11
26
26
81
27
22
90
22
98
98
98
98
98
27
26
26
26
Discount
List Price Schedule
1172
345
34
725
34
145
145
145
145
145
145
145
145
145
145
159
159
159
159
159
246
246
246
246
246
345
345
345
345
345
775
32
60
40
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
725
145
0.80
2
0.80
315
465
540
315
465
145
90
90
90
A20
A
A20
A20
A20
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A20
E1
A20
A20
A20
A20
A20
A20
A
A20
A20
A20
Price List
Numerical Listing by Article Number
Article No.
081154
095853
208191
208192
208193
208193
208194
208195
208196
208197
208197
208198
208199
208200
208201
208201
208202
208203
208204
208205
208205
208206
208207
208208
208209
208209
208210
208211
208212
208213
208213
208214
208215
208216
208216
208217
208218
208219
208219
208220
208221
208222
208222
208223
208224
208225
208225
208226
208250
208251
208252
208253
208254
208255
208256
208257
208258
208259
208260
208284
208285
208286
208287
Type
DIL1MK-10(24V60HZ)
CS-TE
DILM185/22(RDC48)
DILM185/22(RA110)
DILM185/22(RA250)
DILM185/22(RA250)
DILM185/22(RAC500)
DILM225/22(RDC48)
DILM225/22(RA110)
DILM225/22(RA250)
DILM225/22(RA250)
DILM225/22(RAC500)
DILM250/22(RDC48)
DILM250/22(RA110)
DILM250/22(RA250)
DILM250/22(RA250)
DILM250/22(RAC500)
DILM300/22(RDC48)
DILM300/22(RA110)
DILM300/22(RA250)
DILM300/22(RA250)
DILM300/22(RAC500)
DILM400/22(RDC48)
DILM400/22(RA110)
DILM400/22(RA250)
DILM400/22(RA250)
DILM400/22(RAC500)
DILM500/22(RDC48)
DILM500/22(RA110)
DILM500/22(RA250)
DILM500/22(RA250)
DILM500/22(RAC500)
DILM580/22(RA110)
DILM580/22(RA250)
DILM580/22(RA250)
DILM580/22(RAC500)
DILM650/22(RA110)
DILM650/22(RA250)
DILM650/22(RA250)
DILM650/22(RAC500)
DILM750/22(RA110)
DILM750/22(RA250)
DILM750/22(RA250)
DILM750/22(RAC500)
DILM820/22(RA110)
DILM820/22(RA250)
DILM820/22(RA250)
DILM820/22(RAC500)
DILM250-XSP/E(RDC48)
DILM250-XSP/E(RA110)
DILM250-XSP/E(RA250)
DILM250-XSP/E(RAC500)
DILM500-XSP/E(RDC48)
DILM500-XSP/E(RA110)
DILM500-XSP/E(RA250)
DILM500-XSP/E(RAC500)
DILM820-XSP/E(RA110)
DILM820-XSP/E(RA250)
DILM820-XSP/E(RAC500)
DILM820-XHB
DILM650-XHB
DILM500-XHB
DILM400-XHB
Page
27
99
24
24
24
8
24
24
24
24
8
24
24
24
24
8
24
24
24
24
8
24
24
24
24
8
24
24
24
24
8
24
24
24
8
24
24
24
8
24
24
24
8
24
24
24
8
24
29
29
29
29
29
29
29
29
29
29
29
22
22
22
22
Discount
Article No.
A
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
208288
208289
208290
208291
208292
208293
208294
208295
208296
209634
209635
209636
209637
209641
209643
209644
209645
209971
209973
209974
209974
209977
209980
210070
210071
210072
210073
210074
210075
210256
215217
215218
216423
218153
218194
220209
220218
227914
229314
232192
232193
232194
239377
239384
239389
239394
239399
239399
239402
239405
239416
239416
239417
239418
239419
239471
239474
239475
239476
239477
239477
239480
239483
List Price Schedule
246
9
1800
1800
1800
1800
1800
2200
2200
2200
2200
2200
2800
2800
2800
2800
2800
3100
3100
3100
3100
3100
3900
3900
3900
3900
3900
5800
5800
5800
5800
5800
7400
7400
7400
7400
7900
7900
7900
7900
9100
9100
9100
9100
10100
10100
10100
10100
600
600
600
600
910
910
910
910
1475
1475
1475
85
74
34
30
Type
DILM820-XMV
DILM500-XMV
DILM500-XS1
DILM400-XS1
DILM185-XP1
DILM400-XKU-S
DILM225-XKU-S
DILM820-XKB-S
DILM650-XKB-S
ZEV
ZEV-XSW-25
ZEV-XSW-65
ZEV-XSW-145
ZEV-XSW-820
ZEV-XVK-20
ZEV-XVK-40
ZEV-XVK-80
DIL3MK72/22(24V60HZ)
DIL3MK72/22(48V60HZ)
DIL3MK72/22(120V60HZ)
DIL3MK72/22(120V60HZ)
DIL3MK72/22(240V6HZ)
DIL3MK72/22(480V60HZ)
Z5-70/FF250
Z5-100/FF250
Z5-125/FF250
Z5-160/FF250
Z5-220/FF250
Z5-250/FF250
DILEM-10(208V60HZ)
Z5/FF250-XHB
Z5/FF250-XHB-Z
M22-XD-R
M22-XD-R-X0
M22-XD-R-GB0
MVS-WB-EM
S1DILEM
DILEM-01(208V60HZ)
Z5-FF250-XK-CNA
DILM500-XK-CNA
DILM650-XK-CNA
DILM820-XK-CNA
DILM80(24V60HZ)
DILM80(208V60HZ)
DILM80(600V60HZ)
DILM80(48V60HZ)
DILM80(120V60HZ)
DILM80(120V60HZ)
DILM80(240V60HZ)
DILM80(480V60HZ)
DILM80(RDC24)
DILM80(RDC24)
DILM80(RDC60)
DILM80(RDC130)
DILM80(RDC240)
DILM95(24V60HZ)
DILM95(208V60HZ)
DILM95(600V60HZ)
DILM95(48V60HZ)
DILM95(120V60HZ)
DILM95(120V60HZ)
DILM95(240V60HZ)
DILM95(480V60HZ)
Page
Discount
List Price Schedule
20
20
21
21
21
22
22
22
22
90
90
90
90
90
90
90
90
27
27
14
27
27
27
80
80
80
80
80
80
26
82
82
82
82
82
20
21
26
82
22
22
22
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
550
62
180
140
268
125
120
115
110
248
160
160
390
480
12
14
16
639
639
639
639
639
639
380
395
395
410
430
430
72
60
40
3.10
4.30
4.30
25
20
72
125
140
250
530
480
480
480
480
480
480
480
480
650
650
650
650
650
595
595
595
595
595
595
595
595
For Sales and Support call KMparts.com (866) 595-9616
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A
A
A
A
A
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A
A
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Numerical Listing by Article Number
Article No.
239510
239510
239511
239512
239513
239545
239546
239547
239547
239548
239549
239550
239555
239555
239560
239567
239572
239585
239586
239587
239587
239588
239589
239590
239591
239591
239592
239593
239594
240081
254834
254835
267213
267214
267214
269470
269471
271640
271990
276420
276421
276422
276423
276424
276425
276426
276427
276428
276429
276541
276544
276545
276546
276547
276547
276550
276553
276565
276565
276566
276576
276579
276580
Type
DILM95(RDC24)
DILM95(RDC24)
DILM95(RDC60)
DILM95(RDC130)
DILM95(RDC240)
DILM115(RAC24)
DILM115(RAC48)
DILM115(RAC120)
DILM115(RAC120)
DILM115(RAC240)
DILM115(RAC440)
DILM115(RAC500)
DILM115(RDC24)
DILM115(RDC24)
DILM115(RDC60)
DILM115(RDC130)
DILM115(RDC240)
DILM150(RAC24)
DILM150(RAC48)
DILM150(RAC120)
DILM150(RAC120)
DILM150(RAC240)
DILM150(RAC440)
DILM150(RAC500)
DILM150(RDC24)
DILM150(RDC24)
DILM150(RDC60)
DILM150(RDC130)
DILM150(RDC240)
DILM150-XMV
M22-DZ-B-GB14
M22-DZ-X
DILM1000/22(RA110)
DILM1000/22(RA250)
DILM1000/22(RA250)
EMT6-K
EMT6-KDB
M22-DZ-B-X6
DILM1000/22(RAC500)
DILA-XHI02
DILA-XHI11
DILA-XHI20
DILA-XHIV11
DILA-XHI04
DILA-XHI13
DILA-XHI22
DILA-XHI31
DILA-XHI40
DILA-XHIV22
DILM7-10(24V60HZ)
DILM7-10(208V60HZ)
DILM7-10(600V60HZ)
DILM7-10(48V60HZ)
DILM7-10(120V60HZ)
DILM7-10(120V60HZ)
DILM7-10(240V60HZ)
DILM7-10(480V60HZ)
DILM7-10(24VDC)
DILM7-10(24VDC)
DILM7-10(48VDC)
DILM7-01(24V60HZ)
DILM7-01(208V60HZ)
DILM7-01(600V60HZ)
Page
25
7
25
25
25
23
23
23
6
23
23
23
25
7
25
25
25
23
23
23
6
23
23
23
25
7
25
25
25
20
82
82
24
24
8
98
98
82
24
15
15
15
15
15
15
15
15
15
15
23
23
23
23
23
6
23
23
25
7
25
23
23
23
Discount
Article No.
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
276581
276582
276582
276585
276588
276600
276600
276601
276681
276684
276685
276686
276687
276687
276690
276693
276705
276705
276706
276716
276719
276720
276721
276722
276722
276725
276728
276740
276740
276741
276821
276824
276825
276826
276827
276827
276830
276833
276845
276845
276846
276856
276859
276860
276861
276862
276862
276865
276868
276880
276880
276881
276961
276964
276965
276966
276967
276970
276970
276973
276985
276985
276986
List Price Schedule
775
775
775
775
775
820
820
820
820
820
820
820
925
925
925
925
925
1010
1010
1010
1010
1010
1010
1010
1196
1196
1196
1196
1196
24
18
14
11700
11700
11700
255
440
18
11700
26
26
26
50
46
46
46
46
46
72
88
88
88
88
88
88
88
88
110
110
110
88
88
88
Type
DILM7-01(48V60HZ)
DILM7-01(120V60HZ)
DILM7-01(120V60HZ)
DILM7-01(240V60HZ)
DILM7-01(480V60HZ)
DILM7-01(24VDC)
DILM7-01(24VDC)
DILM7-01(48VDC)
DILM9-10(24V60HZ)
DILM9-10(208V60HZ)
DILM9-10(600V60HZ)
DILM9-10(48V60HZ)
DILM9-10(120V60HZ)
DILM9-10(120V60HZ)
DILM9-10(240V60HZ)
DILM9-10(480V60HZ)
DILM9-10(24VDC)
DILM9-10(24VDC)
DILM9-10(48VDC)
DILM9-01(24V60HZ)
DILM9-01(208V60HZ)
DILM9-01(600V60HZ)
DILM9-01(48V60HZ)
DILM9-01(120V60HZ)
DILM9-01(120V60HZ)
DILM9-01(240V60HZ)
DILM9-01(480V60HZ)
DILM9-01(24VDC)
DILM9-01(24VDC)
DILM9-01(48VDC)
DILM12-10(24V60HZ)
DILM12-10(208V60HZ)
DILM12-10(600V60HZ)
DILM12-10(48V60HZ)
DILM12-10(120V60HZ)
DILM12-10(120V60HZ)
DILM12-10(240V60HZ)
DILM12-10(480V60HZ)
DILM12-10(24VDC)
DILM12-10(24VDC)
DILM12-10(48VDC)
DILM12-01(24V60HZ)
DILM12-01(208V60HZ)
DILM12-01(600V60HZ)
DILM12-01(48V60HZ)
DILM12-01(120V60HZ)
DILM12-01(120V60HZ)
DILM12-01(240V60HZ)
DILM12-01(480V60HZ)
DILM12-01(24VDC)
DILM12-01(24VDC)
DILM12-01(48VDC)
DILMP20(24V60HZ)
DILMP20(208V60HZ)
DILMP20(600V60HZ)
DILMP20(48V60HZ)
DILMP20(120V60HZ)
DILMP20(240V60HZ)
DILMP20(120V60HZ)
DILMP20(480V60HZ)
DILMP20(24VDC)
DILMP20(24VDC)
DILMP20(48VDC)
For Sales and Support call KMparts.com (866) 595-9616
Page
23
23
6
23
23
25
7
25
23
23
23
23
23
6
23
23
25
7
25
23
23
23
23
23
6
23
23
25
7
25
23
23
23
23
23
6
23
23
25
7
25
23
23
23
23
23
6
23
23
25
7
25
23
23
23
23
23
23
9
23
25
9
25
Discount
List Price Schedule
88
88
88
88
88
110
110
110
100
100
100
100
100
100
100
100
120
120
120
100
100
100
100
100
100
100
100
120
120
120
124
124
124
124
124
124
124
124
158
158
158
124
124
124
124
124
124
124
124
158
158
158
130
130
130
130
130
130
130
130
160
160
160
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Numerical Listing by Article Number
Article No.
276995
276998
276999
277000
277001
277001
277004
277007
277018
277018
277019
277020
277021
277027
277030
277031
277032
277033
277033
277036
277039
277050
277050
277051
277052
277053
277123
277126
277127
277128
277129
277129
277132
277135
277146
277146
277147
277148
277149
277155
277158
277159
277160
277161
277161
277164
277167
277178
277178
277179
277180
277181
277251
277254
277255
277256
277257
277257
277260
277263
277274
277274
277275
Type
DILM17-10(24V60HZ)
DILM17-10(208V60HZ)
DILM17-10(600V60HZ)
DILM17-10(48V60HZ)
DILM17-10(120V60HZ)
DILM17-10(120V60HZ)
DILM17-10(240V60HZ)
DILM17-10(480V60HZ)
DILM17-10(RDC24)
DILM17-10(RDC24)
DILM17-10(RDC60)
DILM17-10(RDC130)
DILM17-10(RDC240)
DILM17-01(24V60HZ)
DILM17-01(208V60HZ)
DILM17-01(600V60HZ)
DILM17-01(48V60HZ)
DILM17-01(120V60HZ)
DILM17-01(120V60HZ)
DILM17-01(240V60HZ)
DILM17-01(480V60HZ)
DILM17-01(RDC24)
DILM17-01(RDC24)
DILM17-01(RDC60)
DILM17-01(RDC130)
DILM17-01(RDC240)
DILM25-10(24V60HZ)
DILM25-10(208V60HZ)
DILM25-10(600V60HZ)
DILM25-10(48V60HZ)
DILM25-10(120V60HZ)
DILM25-10(120V60HZ)
DILM25-10(240V60HZ)
DILM25-10(480V60HZ)
DILM25-10(RDC24)
DILM25-10(RDC24)
DILM25-10(RDC60)
DILM25-10(RDC130)
DILM25-10(RDC240)
DILM25-01(24V60HZ)
DILM25-01(208V60HZ)
DILM25-01(600V60HZ)
DILM25-01(48V60HZ)
DILM25-01(120V60HZ)
DILM25-01(120V60HZ)
DILM25-01(240V60HZ)
DILM25-01(480V60HZ)
DILM25-01(RDC24)
DILM25-01(RDC24)
DILM25-01(RDC60)
DILM25-01(RDC130)
DILM25-01(RDC240)
DILM32-10(24V60HZ)
DILM32-10(208V60HZ)
DILM32-10(600V60HZ)
DILM32-10(48V60HZ)
DILM32-10(120V60HZ)
DILM32-10(120V60HZ)
DILM32-10(240V60HZ)
DILM32-10(480V60HZ)
DILM32-10(RDC24)
DILM32-10(RDC24)
DILM32-10(RDC60)
Page
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
Discount
Article No.
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
277276
277277
277283
277286
277287
277288
277289
277289
277292
277295
277306
277306
277307
277308
277309
277375
277376
277377
277757
277760
277761
277762
277763
277763
277766
277769
277780
277780
277781
277782
277783
277821
277824
277825
277826
277827
277827
277830
277833
277844
277844
277845
277846
277847
277885
277888
277889
277890
277891
277891
277894
277897
277908
277908
277909
277910
277911
277945
277946
277947
277948
277949
277950
List Price Schedule
130
130
130
130
130
130
130
130
185
185
185
185
185
130
130
130
130
130
130
130
130
185
185
185
185
185
175
175
175
175
175
175
175
175
225
225
225
225
225
175
175
175
175
175
175
175
175
225
225
225
225
225
220
220
220
220
220
220
220
220
310
310
310
Type
DILM32-10(RDC130)
DILM32-10(RDC240)
DILM32-01(24V60HZ)
DILM32-01(208V60HZ)
DILM32-01(600V60HZ)
DILM32-01(48V60HZ)
DILM32-01(120V60HZ)
DILM32-01(120V60HZ)
DILM32-01(240V60HZ)
DILM32-01(480V60HZ)
DILM32-01(RDC24)
DILM32-01(RDC24)
DILM32-01(RDC60)
DILM32-01(RDC130)
DILM32-01(RDC240)
DILM32-XHI02
DILM32-XHI11
DILM32-XHI22
DILM40(24V60HZ)
DILM40(208V60HZ)
DILM40(600V60HZ)
DILM40(48V60HZ)
DILM40(120V60HZ)
DILM40(120V60HZ)
DILM40(240V60HZ)
DILM40(480V60HZ)
DILM40(RDC24)
DILM40(RDC24)
DILM40(RDC60)
DILM40(RDC130)
DILM40(RDC240)
DILM50(24V60HZ)
DILM50(208V60HZ)
DILM50(600V60HZ)
DILM50(48V60HZ)
DILM50(120V60HZ)
DILM50(120V60HZ)
DILM50(240V60HZ)
DILM50(480V60HZ)
DILM50(RDC24)
DILM50(RDC24)
DILM50(RDC60)
DILM50(RDC130)
DILM50(RDC240)
DILM65(24V60HZ)
DILM65(208V60HZ)
DILM65(600V60HZ)
DILM65(48V60HZ)
DILM65(120V60HZ)
DILM65(120V60HZ)
DILM65(240V60HZ)
DILM65(480V60HZ)
DILM65(RDC24)
DILM65(RDC24)
DILM65(RDC60)
DILM65(RDC130)
DILM65(RDC240)
DILM150-XHI20
DILM150-XHI11
DILM150-XHI02
DILM150-XHI40
DILM150-XHI31
DILM150-XHI22
Page
Discount
List Price Schedule
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
15
15
15
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
23
23
23
23
23
6
23
23
25
7
25
25
25
16
16
16
16
16
16
310
310
220
220
220
220
220
220
220
220
310
310
310
310
310
26
26
46
250
250
250
250
250
250
250
250
325
325
325
325
325
290
290
290
290
290
290
290
290
460
460
460
460
460
390
390
390
390
390
390
390
390
585
585
585
585
585
26
26
26
46
46
46
For Sales and Support call KMparts.com (866) 595-9616
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Numerical Listing by Article Number
Article No.
277951
277952
277953
278054
278057
278058
278058
278061
278064
278079
278082
278083
278083
278086
278089
278104
278107
278108
278108
278111
278114
278129
278132
278133
278133
278136
278139
278154
278157
278158
278158
278161
278164
278179
278182
278183
278183
278186
278189
278204
278207
278208
278208
278211
278214
278229
278232
278233
278233
278236
278239
278254
278257
278258
278258
278261
278264
278425
278426
278427
278431
278432
278433
Type
Page
DILM150-XHI13
DILM150-XHI04
DILM150-XHIV22
DIULM7/21(24V60HZ)
DIULM7/21(48V60HZ)
DIULM7/21(120V60HZ)
DIULM7/21(120V60HZ)
DIULM7/21(240V60HZ)
DIULM7/21(480V60HZ)
DIULM9/21(24V60HZ)
DIULM9/21(48V60HZ)
DIULM9/21(120V60HZ)
DIULM9/21(120V60HZ)
DIULM9/21(240V60HZ)
DIULM9/21(480V60HZ)
DIULM12/21(24V60HZ)
DIULM12/21(48V60HZ)
DIULM12/21(120V60HZ)
DIULM12/21(120V60HZ)
DIULM12/21(240V60HZ)
DIULM12/21(480V60HZ)
DIULM17/21(24V60HZ)
DIULM17/21(48V60HZ)
DIULM17/21(120V60HZ)
DIULM17/21(120V60HZ)
DIULM17/21(240V60HZ)
DIULM17/21(480V60HZ)
DIULM25/21(24V60HZ)
DIULM25/21(48V60HZ)
DIULM25/21(120V60HZ)
DIULM25/21(120V60HZ)
DIULM25/21(240V60HZ)
DIULM25/21(480V60HZ)
DIULM32/21(24V60HZ)
DIULM32/21(48V60HZ)
DIULM32/21(120V60HZ)
DIULM32/21(120V60HZ)
DIULM32/21(240V60HZ)
DIULM32/21(480V60HZ)
DIULM40/11(24V60HZ)
DIULM40/11(48V60HZ)
DIULM40/11(120V60HZ)
DIULM40/11(120V60HZ)
DIULM40/11(240V60HZ)
DIULM40/11(480V60HZ)
DIULM50/11(24V60HZ)
DIULM50/11(48V60HZ)
DIULM50/11(120V60HZ)
DIULM50/11(120V60HZ)
DIULM50/11(240V60HZ)
DIULM50/11(480V60HZ)
DIULM65/11(24V60HZ)
DIULM65/11(48V60HZ)
DIULM65/11(120V60HZ)
DIULM65/11(120V60HZ)
DIULM65/11(240V60HZ)
DIULM65/11(480V60HZ)
DILM1000-XHI11-SI
DILM1000-XHIV11-SI
DILM1000-XHI11-SA
ZB12-0,16
ZB12-0,24
ZB12-0,4
16
16
16
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
28
28
12
28
28
28
16
16
16
78
78
78
Discount
Article No.
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
278434
278435
278436
278437
278438
278439
278440
278441
278442
278443
278444
278445
278446
278447
278448
278449
278450
278451
278452
278453
278454
278455
278456
278457
278458
278459
278460
278461
278462
278463
278464
278465
278466
278473
278474
281130
281131
281132
281133
281134
281135
281136
281137
281138
281139
281140
281141
281142
281143
281144
281145
281146
281147
281148
281149
281150
281155
281156
281157
281158
281160
281161
281162
List Price Schedule
46
46
72
365
365
365
365
365
365
380
380
380
380
380
380
400
400
400
400
400
400
500
500
500
500
500
500
575
575
575
575
575
575
670
670
670
670
670
670
810
810
810
810
810
810
860
860
860
860
860
860
980
980
980
980
980
980
46
46
46
72
72
72
Type
ZB12-0,6
ZB12-1
ZB12-1,6
ZB12-2,4
ZB12-4
ZB12-6
ZB12-10
ZB12-12
ZB32-0,16
ZB32-0,24
ZB32-0,4
ZB32-0,6
ZB32-1
ZB32-1,6
ZB32-2,4
ZB32-4
ZB32-6
ZB32-10
ZB32-16
ZB32-24
ZB32-32
ZB65-10
ZB65-16
ZB65-24
ZB65-40
ZB65-57
ZB65-65
ZB150-35
ZB150-50
ZB150-70
ZB150-100
ZB150-125
ZB150-150
ZB32-XEZ
ZB65-XEZ
DILM32-XSP(24V50HZ)
DILM32-XSP(48V50HZ)
DILM32-XSP(240V50HZ)
DILM32-XSP(500V50HZ)
DILM32-XSP(24V60HZ)
DILM32-XSP(110V60HZ)
DILM32-XSP(115V60HZ)
DILM32-XSP(42V50HZ,48V60HZ)
DILM32-XSP(110V50HZ,120V60HZ)
DILM32-XSP(190V50HZ,220V60HZ)
DILM32-XSP(220V50HZ,240V60HZ)
DILM32-XSP(230V50HZ,240V60HZ)
DILM32-XSP(380V50HZ,440V60HZ)
DILM32-XSP(400V50HZ,440V60HZ)
DILM32-XSP(415V50HZ,480V60HZ)
DILM32-XSP(24V50/60HZ)
DILM32-XSP(42V50/60HZ)
DILM32-XSP(110V50/60HZ)
DILM32-XSP(220V50/60HZ)
DILM32-XSP(230V50/60HZ)
DILM32-XSP(380V50/60HZ)
DILM32-XSP(RDC24)
DILM32-XSP(RDC60)
DILM32-XSP(RDC130)
DILM32-XSP(RDC240)
DILM65-XSP(24V50HZ)
DILM65-XSP(48V50HZ)
DILM65-XSP(240V50HZ)
For Sales and Support call KMparts.com (866) 595-9616
Page
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
79
79
79
79
79
79
79
79
79
79
79
79
82
82
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
30
30
30
30
29
29
29
Discount
List Price Schedule
72
72
72
72
72
72
72
72
76
76
76
76
76
76
76
76
76
76
76
76
96
100
100
118
118
130
130
190
190
190
200
280
280
18
30
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
72
190
190
190
190
90
90
90
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Numerical Listing by Article Number
Article No.
281163
281164
281165
281166
281167
281168
281169
281170
281171
281172
281173
281174
281175
281176
281177
281178
281179
281180
281185
281186
281187
281188
281190
281191
281192
281193
281194
281195
281196
281197
281198
281199
281200
281201
281202
281203
281204
281205
281206
281207
281208
281209
281210
281211
281212
281213
281214
281215
281216
281217
281218
281219
281220
281221
281222
281223
281224
281225
281226
281227
283108
283109
283130
Type
DILM65-XSP(500V50HZ)
DILM65-XSP(24V60HZ)
DILM65-XSP(110V60HZ)
DILM65-XSP(115V60HZ)
DILM65-XSP(42V50HZ,48V60HZ)
DILM65-XSP(110V50HZ,120V60HZ)
DILM65-XSP(190V50HZ,220V60HZ)
DILM65-XSP(220V50HZ,240V60HZ)
DILM65-XSP(230V50HZ,240V60HZ)
DILM65-XSP(380V50HZ,440V60HZ)
DILM65-XSP(400V50HZ,440V60HZ)
DILM65-XSP(415V50HZ,480V60HZ)
DILM65-XSP(24V50/60HZ)
DILM65-XSP(42V50/60HZ)
DILM65-XSP(110V50/60HZ)
DILM65-XSP(220V50/60HZ)
DILM65-XSP(230V50/60HZ)
DILM65-XSP(380V50/60HZ)
DILM65-XSP(RDC24)
DILM65-XSP(RDC60)
DILM65-XSP(RDC130)
DILM65-XSP(RDC240)
DILM12-XS1
DILM32-XS1
DILM65-XS1
DILM12-XP1
DILM32-XP1
DILM65-XP1
DILM12-XMV
DILM32-XMV
DILM65-XMV
DILM12-XSPR48
DILM12-XSPR240
DILM12-XSPR500
DILM32-XSPR48
DILM32-XSPR240
DILM32-XSPR500
DILM95-XSPR48
DILM95-XSPR240
DILM95-XSPR500
DILM12-XSPV48
DILM12-XSPV130
DILM12-XSPV240
DILM12-XSPV500
DILM32-XSPV48
DILM32-XSPV130
DILM32-XSPV240
DILM32-XSPV500
DILM95-XSPV48
DILM95-XSPV130
DILM95-XSPV240
DILM95-XSPV500
DILM12-XSPVL48
DILM12-XSPVL240
DILM32-XSPVL48
DILM32-XSPVL240
DILM95-XSPVL48
DILM95-XSPVL240
DILM150-XVB
DILM32-XVB
DILM12-XRL
DILM32-XRL
DILM12-XSL
Page
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
30
30
30
30
21
21
21
21
21
21
20
20
20
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
20
20
21
Discount
Article No.
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
283131
283351
283353
283355
283357
283359
283361
283362
283363
283364
283377
283378
283379
283380
283463
283464
285251
285252
285253
285254
285255
285256
285257
285258
285259
289145
289146
289147
290168
List Price Schedule
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
250
250
250
250
20
20
28
16
30
40
18
18
24
45
45
45
50
50
50
64
64
64
45
45
45
45
50
50
50
50
64
64
64
64
50
50
55
55
68
68
1
1
30
50
45
Type
DILM32-XSL
DIULM7/21(208V60HZ)
DIULM9/21(208V60HZ)
DIULM12/21(208V60HZ)
DIULM17/21(208V60HZ)
DIULM25/21(208V60HZ)
DIULM32/21(208V60HZ)
DIULM40/11(208V60HZ)
DIULM50/11(208V60HZ)
DIULM65/11(208V60HZ)
DILM32-XSP(208V60HZ)
DILM32-XSP(600V60HZ)
DILM65-XSP(208V60HZ)
DILM65-XSP(600V60HZ)
DILM150-XHIA11
DILM150-XHIA22
DILM12-XSPI48
DILM12-XSPI130
DILM12-XSPI250
DILM32-XSPI48
DILM32-XSPI130
DILM32-XSPI250
DILM150-XSPI48
DILM150-XSPI130
DILM150-XSPI250
DILM1000-XSP/E(RA250)
DILM1000-XSP/E(RA110)
DILM1000-XSP/E(RAC500)
ZB12-16
Page
Discount
List Price Schedule
21
28
28
28
28
28
28
28
28
28
29
29
29
29
16
16
19
19
19
19
19
19
19
19
19
29
29
29
78
65
365
380
400
500
575
670
810
860
980
72
72
90
90
26
46
35
35
35
40
40
40
45
45
45
1480
1480
1480
72
For Sales and Support call KMparts.com (866) 595-9616
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Notes
For Sales and Support call KMparts.com (866) 595-9616
Price List
Alphabetical Listing by Type
Type
02DILE
02DILEM
04DILE
11DDILE
11DILE
11DILEM
13DILE
20DILE
22DDILE
22DILE
22DILEM
31DILE
40DILE
BT2571
BT483
CS-TE
DIL00MK-02(120V60HZ)
DIL00MK-02(120V60HZ)
DIL00MK-02(240V6HZ)
DIL00MK-02(24V60HZ)
DIL00MK-02(480V60HZ)
DIL00MK-02(48V60HZ)
DIL00MK-11(120V60HZ)
DIL00MK-11(120V60HZ)
DIL00MK-11(240V6HZ)
DIL00MK-11(24V60HZ)
DIL00MK-11(480V60HZ)
DIL00MK-11(48V60HZ)
DIL0MK-10(120V60HZ)
DIL0MK-10(120V60HZ)
DIL0MK-10(240V6HZ)
DIL0MK-10(24V60HZ)
DIL0MK-10(480V60HZ)
DIL0MK-10(48V60HZ)
DIL1MK-10(120V60HZ)
DIL1MK-10(120V60HZ)
DIL1MK-10(240V6HZ)
DIL1MK-10(24V60HZ)
DIL1MK-10(480V60HZ)
DIL1MK-10(48V60HZ)
DIL2MK-10(120V60HZ)
DIL2MK-10(120V60HZ)
DIL2MK-10(240V6HZ)
DIL2MK-10(24V60HZ)
DIL2MK-10(480V60HZ)
DIL2MK-10(48V60HZ)
DIL3MK72/22(120V60HZ)
DIL3MK72/22(120V60HZ)
DIL3MK72/22(240V6HZ)
DIL3MK72/22(24V60HZ)
DIL3MK72/22(480V60HZ)
DIL3MK72/22(48V60HZ)
DILA-XHI02
DILA-XHI04
DILA-XHI11
DILA-XHI13
DILA-XHI20
DILA-XHI22
DILA-XHI31
DILA-XHI40
DILA-XHIV11
DILA-XHIV22
DILEM-01(120V60HZ)
Article No. Page
010240
010064
010256
049824
010224
010080
002397
010208
049823
010288
010112
048912
010304
062276
059904
095853
047031
047031
047034
076733
047037
047030
047020
047020
047023
059794
047026
047019
047042
047042
047045
017083
047048
047041
047052
047052
047055
081154
047058
047051
047062
047062
047065
040814
047068
047061
209974
209974
209977
209971
209980
209973
276420
276424
276421
276425
276422
276426
276427
276428
276423
276429
051792
17
17
17
17
17
17
17
17
17
17
17
17
17
22
22
99
13
27
27
27
27
27
13
27
27
27
27
27
13
27
27
27
27
27
13
27
27
27
27
27
13
27
27
27
27
27
14
27
27
27
27
27
15
15
15
15
15
15
15
15
15
15
10
Discount
List Price Schedule
20
20
32
40
20
20
32
32
60
32
32
32
32
0.80
0.80
9
145
145
145
145
145
145
145
145
145
145
145
145
159
159
159
159
159
159
246
246
246
246
246
246
345
345
345
345
345
345
639
639
639
639
639
639
26
46
26
46
26
46
46
46
50
72
72
Type
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
DILEM-01(120V60HZ)
DILEM-01(208V60HZ)
DILEM-01(240V60HZ)
DILEM-01(24V60HZ)
DILEM-01(480V60HZ)
DILEM-01(48V60HZ)
DILEM-01(600V60HZ)
DILEM-01-G(110VDC)
DILEM-01-G(12VDC)
DILEM-01-G(220VDC)
DILEM-01-G(24VDC)
DILEM-01-G(24VDC)
DILEM-01-G(48VDC)
DILEM-01-G(60VDC)
DILEM-10(120V60HZ)
DILEM-10(120V60HZ)
DILEM-10(208V60HZ)
DILEM-10(240V60HZ)
DILEM-10(24V60HZ)
DILEM-10(480V60HZ)
DILEM-10(48V60HZ)
DILEM-10(600V60HZ)
DILEM-10-G(110VDC)
DILEM-10-G(12VDC)
DILEM-10-G(220VDC)
DILEM-10-G(24VDC)
DILEM-10-G(24VDC)
DILEM-10-G(48VDC)
DILEM-10-G(60VDC)
DILEM4(120V60HZ)
DILEM4(120V60HZ)
DILEM4(240V60HZ)
DILEM4(24V60HZ)
DILEM4(480V60HZ)
DILEM4(48V60HZ)
DILEM4-G(110VDC)
DILEM4-G(12VDC)
DILEM4-G(220VDC)
DILEM4-G(24VDC)
DILEM4-G(24VDC)
DILEM4-G(48VDC)
DILEM4-G(60VDC)
DILM1000/22(RA110)
DILM1000/22(RA250)
DILM1000/22(RA250)
DILM1000/22(RAC500)
DILM1000-XHI11-SA
DILM1000-XHI11-SI
DILM1000-XHIV11-SI
DILM1000-XSP/E(RA110)
DILM1000-XSP/E(RA250)
DILM1000-XSP/E(RAC500)
DILM115(RAC120)
DILM115(RAC120)
DILM115(RAC24)
DILM115(RAC240)
DILM115(RAC440)
DILM115(RAC48)
DILM115(RAC500)
DILM115(RDC130)
DILM115(RDC24)
DILM115(RDC24)
DILM115(RDC240)
Article No. Page
051792
227914
051795
010134
051798
051791
010327
010136
079642
010168
010343
010343
010496
010040
051783
051783
210256
051786
010006
051789
051782
010197
010309
079594
010325
010213
010213
010245
010293
051801
051801
051804
014776
051807
051800
013166
079680
013194
012701
012701
012811
012844
267213
267214
267214
271990
278427
278425
278426
289146
289145
289147
239547
239547
239545
239548
239549
239546
239550
239567
239555
239555
239572
For Sales and Support call KMparts.com (866) 595-9616
Discount
List Price Schedule
26
26
26
26
26
26
26
26
26
26
10
26
26
26
10
26
26
26
26
26
26
26
26
26
26
10
26
26
26
26
11
26
26
26
26
26
26
26
26
11
26
26
24
24
8
24
16
16
16
29
29
29
23
6
23
23
23
23
23
25
25
7
25
72
72
72
72
72
72
72
90
90
90
90
90
90
90
72
72
72
72
72
72
72
72
90
90
90
90
90
90
90
72
72
72
72
72
72
90
90
90
90
90
90
90
11700
11700
11700
11700
46
46
46
1480
1480
1480
820
820
820
820
820
820
820
925
925
925
925
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Alphabetical Listing by Type
Type
DILM115(RDC60)
DILM12-01(120V60HZ)
DILM12-01(120V60HZ)
DILM12-01(208V60HZ)
DILM12-01(240V60HZ)
DILM12-01(24V60HZ)
DILM12-01(24VDC)
DILM12-01(24VDC)
DILM12-01(480V60HZ)
DILM12-01(48V60HZ)
DILM12-01(48VDC)
DILM12-01(600V60HZ)
DILM12-10(120V60HZ)
DILM12-10(120V60HZ)
DILM12-10(208V60HZ)
DILM12-10(240V60HZ)
DILM12-10(24V60HZ)
DILM12-10(24VDC)
DILM12-10(24VDC)
DILM12-10(480V60HZ)
DILM12-10(48V60HZ)
DILM12-10(48VDC)
DILM12-10(600V60HZ)
DILM12-XMV
DILM12-XP1
DILM12-XRL
DILM12-XS1
DILM12-XSL
DILM12-XSPI130
DILM12-XSPI250
DILM12-XSPI48
DILM12-XSPR240
DILM12-XSPR48
DILM12-XSPR500
DILM12-XSPV130
DILM12-XSPV240
DILM12-XSPV48
DILM12-XSPV500
DILM12-XSPVL240
DILM12-XSPVL48
DILM150(RAC120)
DILM150(RAC120)
DILM150(RAC24)
DILM150(RAC240)
DILM150(RAC440)
DILM150(RAC48)
DILM150(RAC500)
DILM150(RDC130)
DILM150(RDC24)
DILM150(RDC24)
DILM150(RDC240)
DILM150(RDC60)
DILM150-XHI02
DILM150-XHI04
DILM150-XHI11
DILM150-XHI13
DILM150-XHI20
DILM150-XHI22
DILM150-XHI31
DILM150-XHI40
DILM150-XHIA11
DILM150-XHIA22
DILM150-XHIV22
10
Article No. Page
239560
276862
276862
276859
276865
276856
276880
276880
276868
276861
276881
276860
276827
276827
276824
276830
276821
276845
276845
276833
276826
276846
276825
281196
281193
283108
281190
283130
285252
285253
285251
281200
281199
281201
281209
281210
281208
281211
281221
281220
239587
239587
239585
239588
239589
239586
239590
239593
239591
239591
239594
239592
277947
277952
277946
277951
277945
277950
277949
277948
283463
283464
277953
25
23
6
23
23
23
25
7
23
23
25
23
23
6
23
23
23
25
7
23
23
25
23
20
21
20
21
21
19
19
19
18
18
18
18
18
18
18
19
19
23
6
23
23
23
23
23
25
25
7
25
25
16
16
16
16
16
16
16
16
16
16
16
Discount
List Price Schedule
925
124
124
124
124
124
158
158
124
124
158
124
124
124
124
124
124
158
158
124
124
158
124
18
16
30
20
45
35
35
35
45
45
45
45
45
45
45
50
50
1010
1010
1010
1010
1010
1010
1010
1196
1196
1196
1196
1196
26
46
26
46
26
46
46
46
26
46
72
Type
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
DILM150-XMV
DILM150-XSPI130
DILM150-XSPI250
DILM150-XSPI48
DILM150-XVB
DILM17-01(120V60HZ)
DILM17-01(120V60HZ)
DILM17-01(208V60HZ)
DILM17-01(240V60HZ)
DILM17-01(24V60HZ)
DILM17-01(480V60HZ)
DILM17-01(48V60HZ)
DILM17-01(600V60HZ)
DILM17-01(RDC130)
DILM17-01(RDC24)
DILM17-01(RDC24)
DILM17-01(RDC240)
DILM17-01(RDC60)
DILM17-10(120V60HZ)
DILM17-10(120V60HZ)
DILM17-10(208V60HZ)
DILM17-10(240V60HZ)
DILM17-10(24V60HZ)
DILM17-10(480V60HZ)
DILM17-10(48V60HZ)
DILM17-10(600V60HZ)
DILM17-10(RDC130)
DILM17-10(RDC24)
DILM17-10(RDC24)
DILM17-10(RDC240)
DILM17-10(RDC60)
DILM185/22(RA110)
DILM185/22(RA250)
DILM185/22(RA250)
DILM185/22(RAC500)
DILM185/22(RDC48)
DILM185-XP1
DILM225/22(RA110)
DILM225/22(RA250)
DILM225/22(RA250)
DILM225/22(RAC500)
DILM225/22(RDC48)
DILM225-XKU-S
DILM250/22(RA110)
DILM250/22(RA250)
DILM250/22(RA250)
DILM250/22(RAC500)
DILM250/22(RDC48)
DILM25-01(120V60HZ)
DILM25-01(120V60HZ)
DILM25-01(208V60HZ)
DILM25-01(240V60HZ)
DILM25-01(24V60HZ)
DILM25-01(480V60HZ)
DILM25-01(48V60HZ)
DILM25-01(600V60HZ)
DILM25-01(RDC130)
DILM25-01(RDC24)
DILM25-01(RDC24)
DILM25-01(RDC240)
DILM25-01(RDC60)
DILM250-XSP/E(RA110)
DILM250-XSP/E(RA250)
Article No. Page
240081
285258
285259
285257
281226
277033
277033
277030
277036
277027
277039
277032
277031
277052
277050
277050
277053
277051
277001
277001
276998
277004
276995
277007
277000
276999
277020
277018
277018
277021
277019
208192
208193
208193
208194
208191
208292
208196
208197
208197
208198
208195
208294
208200
208201
208201
208202
208199
277161
277161
277158
277164
277155
277167
277160
277159
277180
277178
277178
277181
277179
208251
208252
For Sales and Support call KMparts.com (866) 595-9616
20
19
19
19
19
23
6
23
23
23
23
23
23
25
25
7
25
25
23
6
23
23
23
23
23
23
25
25
7
25
25
24
24
8
24
24
21
24
24
8
24
24
22
24
24
8
24
24
23
6
23
23
23
23
23
23
25
25
7
25
25
29
29
Discount
List Price Schedule
24
45
45
45
1
130
130
130
130
130
130
130
130
185
185
185
185
185
130
130
130
130
130
130
130
130
185
185
185
185
185
1800
1800
1800
1800
1800
268
2200
2200
2200
2200
2200
120
2800
2800
2800
2800
2800
175
175
175
175
175
175
175
175
225
225
225
225
225
600
600
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Alphabetical Listing by Type
Type
Article No. Page
DILM250-XSP/E(RAC500)
DILM250-XSP/E(RDC48)
DILM25-10(120V60HZ)
DILM25-10(120V60HZ)
DILM25-10(208V60HZ)
DILM25-10(240V60HZ)
DILM25-10(24V60HZ)
DILM25-10(480V60HZ)
DILM25-10(48V60HZ)
DILM25-10(600V60HZ)
DILM25-10(RDC130)
DILM25-10(RDC24)
DILM25-10(RDC24)
DILM25-10(RDC240)
DILM25-10(RDC60)
DILM300/22(RA110)
DILM300/22(RA250)
DILM300/22(RA250)
DILM300/22(RAC500)
DILM300/22(RDC48)
DILM32-01(120V60HZ)
DILM32-01(120V60HZ)
DILM32-01(208V60HZ)
DILM32-01(240V60HZ)
DILM32-01(24V60HZ)
DILM32-01(480V60HZ)
DILM32-01(48V60HZ)
DILM32-01(600V60HZ)
DILM32-01(RDC130)
DILM32-01(RDC24)
DILM32-01(RDC24)
DILM32-01(RDC240)
DILM32-01(RDC60)
DILM32-10(120V60HZ)
DILM32-10(120V60HZ)
DILM32-10(208V60HZ)
DILM32-10(240V60HZ)
DILM32-10(24V60HZ)
DILM32-10(480V60HZ)
DILM32-10(48V60HZ)
DILM32-10(600V60HZ)
DILM32-10(RDC130)
DILM32-10(RDC24)
DILM32-10(RDC24)
DILM32-10(RDC240)
DILM32-10(RDC60)
DILM32-XHI02
DILM32-XHI11
DILM32-XHI22
DILM32-XMV
DILM32-XP1
DILM32-XRL
DILM32-XS1
DILM32-XSL
DILM32-XSP(110V50/60HZ)
DILM32-XSP(110V50HZ,120V60HZ)
DILM32-XSP(110V60HZ)
DILM32-XSP(115V60HZ)
DILM32-XSP(190V50HZ,220V60HZ)
DILM32-XSP(208V60HZ)
DILM32-XSP(220V50/60HZ)
DILM32-XSP(220V50HZ,240V60HZ)
DILM32-XSP(230V50/60HZ)
208253
208250
277129
277129
277126
277132
277123
277135
277128
277127
277148
277146
277146
277149
277147
208204
208205
208205
208206
208203
277289
277289
277286
277292
277283
277295
277288
277287
277308
277306
277306
277309
277307
277257
277257
277254
277260
277251
277263
277256
277255
277276
277274
277274
277277
277275
277375
277376
277377
281197
281194
283109
281191
283131
281147
281138
281135
281136
281139
283377
281148
281140
281149
29
29
23
6
23
23
23
23
23
23
25
25
7
25
25
24
24
8
24
24
23
6
23
23
23
23
23
23
25
25
7
25
25
23
6
23
23
23
23
23
23
25
25
7
25
25
15
15
15
20
21
20
21
21
29
29
29
29
29
29
29
29
29
Discount
List Price Schedule
600
600
175
175
175
175
175
175
175
175
225
225
225
225
225
3100
3100
3100
3100
3100
220
220
220
220
220
220
220
220
310
310
310
310
310
220
220
220
220
220
220
220
220
310
310
310
310
310
26
26
46
18
30
50
20
65
72
72
72
72
72
72
72
72
72
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Type
DILM32-XSP(230V50HZ,240V60HZ)
DILM32-XSP(240V50HZ)
DILM32-XSP(24V50/60HZ)
DILM32-XSP(24V50HZ)
DILM32-XSP(24V60HZ)
DILM32-XSP(380V50/60HZ)
DILM32-XSP(380V50HZ,440V60HZ)
DILM32-XSP(400V50HZ,440V60HZ)
DILM32-XSP(415V50HZ,480V60HZ)
DILM32-XSP(42V50/60HZ)
DILM32-XSP(42V50HZ,48V60HZ)
DILM32-XSP(48V50HZ)
DILM32-XSP(500V50HZ)
DILM32-XSP(600V60HZ)
DILM32-XSP(RDC130)
DILM32-XSP(RDC24)
DILM32-XSP(RDC240)
DILM32-XSP(RDC60)
DILM32-XSPI130
DILM32-XSPI250
DILM32-XSPI48
DILM32-XSPR240
DILM32-XSPR48
DILM32-XSPR500
DILM32-XSPV130
DILM32-XSPV240
DILM32-XSPV48
DILM32-XSPV500
DILM32-XSPVL240
DILM32-XSPVL48
DILM32-XVB
DILM40(120V60HZ)
DILM40(120V60HZ)
DILM40(208V60HZ)
DILM40(240V60HZ)
DILM40(24V60HZ)
DILM40(480V60HZ)
DILM40(48V60HZ)
DILM40(600V60HZ)
DILM40(RDC130)
DILM40(RDC24)
DILM40(RDC24)
DILM40(RDC240)
DILM40(RDC60)
DILM400/22(RA110)
DILM400/22(RA250)
DILM400/22(RA250)
DILM400/22(RAC500)
DILM400/22(RDC48)
DILM400-XHB
DILM400-XKU-S
DILM400-XS1
DILM50(120V60HZ)
DILM50(120V60HZ)
DILM50(208V60HZ)
DILM50(240V60HZ)
DILM50(24V60HZ)
DILM50(480V60HZ)
DILM50(48V60HZ)
DILM50(600V60HZ)
DILM50(RDC130)
DILM50(RDC24)
DILM50(RDC24)
Article No. Page
281141
281132
281145
281130
281134
281150
281142
281143
281144
281146
281137
281131
281133
283378
281157
281155
281158
281156
285255
285256
285254
281203
281202
281204
281213
281214
281212
281215
281223
281222
281227
277763
277763
277760
277766
277757
277769
277762
277761
277782
277780
277780
277783
277781
208208
208209
208209
208210
208207
208287
208293
208291
277827
277827
277824
277830
277821
277833
277826
277825
277846
277844
277844
Discount
List Price Schedule
29
29
29
29
29
29
29
29
29
29
29
29
29
29
30
30
30
30
19
19
19
18
18
18
18
18
18
18
19
19
19
23
6
23
23
23
23
23
23
25
25
7
25
25
24
24
8
24
24
22
22
21
23
6
23
23
23
23
23
23
25
25
7
72
72
72
72
72
72
72
72
72
72
72
72
72
72
190
190
190
190
40
40
40
50
50
50
50
50
50
50
55
55
1
250
250
250
250
250
250
250
250
325
325
325
325
325
3900
3900
3900
3900
3900
30
125
140
290
290
290
290
290
290
290
290
460
460
460
For Sales and Support call KMparts.com (866) 595-9616
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
11
Price List
Alphabetical Listing by Type
Type
DILM50(RDC240)
DILM50(RDC60)
DILM500/22(RA110)
DILM500/22(RA250)
DILM500/22(RA250)
DILM500/22(RAC500)
DILM500/22(RDC48)
DILM500-XHB
DILM500-XK-CNA
DILM500-XMV
DILM500-XS1
DILM500-XSP/E(RA110)
DILM500-XSP/E(RA250)
DILM500-XSP/E(RAC500)
DILM500-XSP/E(RDC48)
DILM580/22(RA110)
DILM580/22(RA250)
DILM580/22(RA250)
DILM580/22(RAC500)
DILM65(120V60HZ)
DILM65(120V60HZ)
DILM65(208V60HZ)
DILM65(240V60HZ)
DILM65(24V60HZ)
DILM65(480V60HZ)
DILM65(48V60HZ)
DILM65(600V60HZ)
DILM65(RDC130)
DILM65(RDC24)
DILM65(RDC24)
DILM65(RDC240)
DILM65(RDC60)
DILM650/22(RA110)
DILM650/22(RA250)
DILM650/22(RA250)
DILM650/22(RAC500)
DILM650-XHB
DILM650-XKB-S
DILM650-XK-CNA
DILM65-XMV
DILM65-XP1
DILM65-XS1
DILM65-XSP(110V50/60HZ)
DILM65-XSP(110V50HZ,120V60HZ)
DILM65-XSP(110V60HZ)
DILM65-XSP(115V60HZ)
DILM65-XSP(190V50HZ,220V60HZ)
DILM65-XSP(208V60HZ)
DILM65-XSP(220V50/60HZ)
DILM65-XSP(220V50HZ,240V60HZ)
DILM65-XSP(230V50/60HZ)
DILM65-XSP(230V50HZ,240V60HZ)
DILM65-XSP(240V50HZ)
DILM65-XSP(24V50/60HZ)
DILM65-XSP(24V50HZ)
DILM65-XSP(24V60HZ)
DILM65-XSP(380V50/60HZ)
DILM65-XSP(380V50HZ,440V60HZ)
DILM65-XSP(400V50HZ,440V60HZ)
DILM65-XSP(415V50HZ,480V60HZ)
DILM65-XSP(42V50/60HZ)
DILM65-XSP(42V50HZ,48V60HZ)
DILM65-XSP(48V50HZ)
12
Article No. Page
277847
277845
208212
208213
208213
208214
208211
208286
232192
208289
208290
208255
208256
208257
208254
208215
208216
208216
208217
277891
277891
277888
277894
277885
277897
277890
277889
277910
277908
277908
277911
277909
208218
208219
208219
208220
208285
208296
232193
281198
281195
281192
281177
281168
281165
281166
281169
283379
281178
281170
281179
281171
281162
281175
281160
281164
281180
281172
281173
281174
281176
281167
281161
25
25
24
24
8
24
24
22
22
20
21
29
29
29
29
24
24
8
24
23
6
23
23
23
23
23
23
25
25
7
25
25
24
24
8
24
22
22
22
20
21
21
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
Discount
List Price Schedule
460
460
5800
5800
5800
5800
5800
34
140
62
180
910
910
910
910
7400
7400
7400
7400
390
390
390
390
390
390
390
390
585
585
585
585
585
7900
7900
7900
7900
74
110
250
24
40
28
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
Type
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
DILM65-XSP(500V50HZ)
DILM65-XSP(600V60HZ)
DILM65-XSP(RDC130)
DILM65-XSP(RDC24)
DILM65-XSP(RDC240)
DILM65-XSP(RDC60)
DILM7-01(120V60HZ)
DILM7-01(120V60HZ)
DILM7-01(208V60HZ)
DILM7-01(240V60HZ)
DILM7-01(24V60HZ)
DILM7-01(24VDC)
DILM7-01(24VDC)
DILM7-01(480V60HZ)
DILM7-01(48V60HZ)
DILM7-01(48VDC)
DILM7-01(600V60HZ)
DILM7-10(120V60HZ)
DILM7-10(120V60HZ)
DILM7-10(208V60HZ)
DILM7-10(240V60HZ)
DILM7-10(24V60HZ)
DILM7-10(24VDC)
DILM7-10(24VDC)
DILM7-10(480V60HZ)
DILM7-10(48V60HZ)
DILM7-10(48VDC)
DILM7-10(600V60HZ)
DILM750/22(RA110)
DILM750/22(RA250)
DILM750/22(RA250)
DILM750/22(RAC500)
DILM80(120V60HZ)
DILM80(120V60HZ)
DILM80(208V60HZ)
DILM80(240V60HZ)
DILM80(24V60HZ)
DILM80(480V60HZ)
DILM80(48V60HZ)
DILM80(600V60HZ)
DILM80(RDC130)
DILM80(RDC24)
DILM80(RDC24)
DILM80(RDC240)
DILM80(RDC60)
DILM820/22(RA110)
DILM820/22(RA250)
DILM820/22(RA250)
DILM820/22(RAC500)
DILM820-XHB
DILM820-XKB-S
DILM820-XK-CNA
DILM820-XMV
DILM820-XSP/E(RA110)
DILM820-XSP/E(RA250)
DILM820-XSP/E(RAC500)
DILM9-01(120V60HZ)
DILM9-01(120V60HZ)
DILM9-01(208V60HZ)
DILM9-01(240V60HZ)
DILM9-01(24V60HZ)
DILM9-01(24VDC)
DILM9-01(24VDC)
Article No. Page
281163
283380
281187
281185
281188
281186
276582
276582
276579
276585
276576
276600
276600
276588
276581
276601
276580
276547
276547
276544
276550
276541
276565
276565
276553
276546
276566
276545
208221
208222
208222
208223
239399
239399
239384
239402
239377
239405
239394
239389
239418
239416
239416
239419
239417
208224
208225
208225
208226
208284
208295
232194
208288
208258
208259
208260
276722
276722
276719
276725
276716
276740
276740
For Sales and Support call KMparts.com (866) 595-9616
29
29
30
30
30
30
23
6
23
23
23
25
7
23
23
25
23
23
6
23
23
23
25
7
23
23
25
23
24
24
8
24
23
6
23
23
23
23
23
23
25
25
7
25
25
24
24
8
24
22
22
22
20
29
29
29
23
6
23
23
23
25
7
Discount
List Price Schedule
90
90
250
250
250
250
88
88
88
88
88
110
110
88
88
110
88
88
88
88
88
88
110
110
88
88
110
88
9100
9100
9100
9100
480
480
480
480
480
480
480
480
650
650
650
650
650
10100
10100
10100
10100
85
115
530
550
1475
1475
1475
100
100
100
100
100
120
120
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
Price List
Alphabetical Listing by Type
Type
DILM9-01(480V60HZ)
DILM9-01(48V60HZ)
DILM9-01(48VDC)
DILM9-01(600V60HZ)
DILM9-10(120V60HZ)
DILM9-10(120V60HZ)
DILM9-10(208V60HZ)
DILM9-10(240V60HZ)
DILM9-10(24V60HZ)
DILM9-10(24VDC)
DILM9-10(24VDC)
DILM9-10(480V60HZ)
DILM9-10(48V60HZ)
DILM9-10(48VDC)
DILM9-10(600V60HZ)
DILM95(120V60HZ)
DILM95(120V60HZ)
DILM95(208V60HZ)
DILM95(240V60HZ)
DILM95(24V60HZ)
DILM95(480V60HZ)
DILM95(48V60HZ)
DILM95(600V60HZ)
DILM95(RDC130)
DILM95(RDC24)
DILM95(RDC24)
DILM95(RDC240)
DILM95(RDC60)
DILM95-XSPR240
DILM95-XSPR48
DILM95-XSPR500
DILM95-XSPV130
DILM95-XSPV240
DILM95-XSPV48
DILM95-XSPV500
DILM95-XSPVL240
DILM95-XSPVL48
DILMP20(120V60HZ)
DILMP20(120V60HZ)
DILMP20(208V60HZ)
DILMP20(240V60HZ)
DILMP20(24V60HZ)
DILMP20(24VDC)
DILMP20(24VDC)
DILMP20(480V60HZ)
DILMP20(48V60HZ)
DILMP20(48VDC)
DILMP20(600V60HZ)
DIULM12/21(120V60HZ)
DIULM12/21(120V60HZ)
DIULM12/21(208V60HZ)
DIULM12/21(240V60HZ)
DIULM12/21(24V60HZ)
DIULM12/21(480V60HZ)
DIULM12/21(48V60HZ)
DIULM17/21(120V60HZ)
DIULM17/21(120V60HZ)
DIULM17/21(208V60HZ)
DIULM17/21(240V60HZ)
DIULM17/21(24V60HZ)
DIULM17/21(480V60HZ)
DIULM17/21(48V60HZ)
DIULM25/21(120V60HZ)
DIULM25/21(120V60HZ)
Article No. Page
276728
276721
276741
276720
276687
276687
276684
276690
276681
276705
276705
276693
276686
276706
276685
239477
239477
239474
239480
239471
239483
239476
239475
239512
239510
239510
239513
239511
281206
281205
281207
281217
281218
281216
281219
281225
281224
276967
276970
276964
276970
276961
276985
276985
276973
276966
276986
276965
278108
278108
283355
278111
278104
278114
278107
278133
278133
283357
278136
278129
278139
278132
278158
278158
23
23
25
23
23
6
23
23
23
25
7
23
23
25
23
23
6
23
23
23
23
23
23
25
25
7
25
25
18
18
18
18
18
18
18
19
19
23
9
23
23
23
25
9
23
23
25
23
12
28
28
28
28
28
28
12
28
28
28
28
28
28
12
28
Discount
List Price Schedule
100
100
120
100
100
100
100
100
100
120
120
100
100
120
100
595
595
595
595
595
595
595
595
775
775
775
775
775
64
64
64
64
64
64
64
68
68
130
130
130
130
130
160
160
130
130
160
130
400
400
400
400
400
400
400
500
500
500
500
500
500
500
575
575
Type
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
DIULM25/21(208V60HZ)
DIULM25/21(240V60HZ)
DIULM25/21(24V60HZ)
DIULM25/21(480V60HZ)
DIULM25/21(48V60HZ)
DIULM32/21(120V60HZ)
DIULM32/21(120V60HZ)
DIULM32/21(208V60HZ)
DIULM32/21(240V60HZ)
DIULM32/21(24V60HZ)
DIULM32/21(480V60HZ)
DIULM32/21(48V60HZ)
DIULM40/11(120V60HZ)
DIULM40/11(120V60HZ)
DIULM40/11(208V60HZ)
DIULM40/11(240V60HZ)
DIULM40/11(24V60HZ)
DIULM40/11(480V60HZ)
DIULM40/11(48V60HZ)
DIULM50/11(120V60HZ)
DIULM50/11(120V60HZ)
DIULM50/11(208V60HZ)
DIULM50/11(240V60HZ)
DIULM50/11(24V60HZ)
DIULM50/11(480V60HZ)
DIULM50/11(48V60HZ)
DIULM65/11(120V60HZ)
DIULM65/11(120V60HZ)
DIULM65/11(208V60HZ)
DIULM65/11(240V60HZ)
DIULM65/11(24V60HZ)
DIULM65/11(480V60HZ)
DIULM65/11(48V60HZ)
DIULM7/21(120V60HZ)
DIULM7/21(120V60HZ)
DIULM7/21(208V60HZ)
DIULM7/21(240V60HZ)
DIULM7/21(24V60HZ)
DIULM7/21(480V60HZ)
DIULM7/21(48V60HZ)
DIULM9/21(120V60HZ)
DIULM9/21(120V60HZ)
DIULM9/21(208V60HZ)
DIULM9/21(240V60HZ)
DIULM9/21(24V60HZ)
DIULM9/21(480V60HZ)
DIULM9/21(48V60HZ)
EMT6
EMT6(230V)
EMT6-DB
EMT6-DB(230V)
EMT6-DBK
EMT6-K
EMT6-KDB
HDILE
M22-DZ-B-GB14
M22-DZ-B-X6
M22-DZ-X
M22-XD-R
M22-XD-R-GB0
M22-XD-R-X0
MVDILE
MVS-WB-EM
P1DILEM
Article No. Page
283359
278161
278154
278164
278157
278183
278183
283361
278186
278179
278189
278182
278208
278208
283362
278211
278204
278214
278207
278233
278233
283363
278236
278229
278239
278232
278258
278258
283364
278261
278254
278264
278257
278058
278058
283351
278061
278054
278064
278057
278083
278083
283353
278086
278079
278089
278082
066166
066400
066167
066401
066168
269470
269471
010482
254834
271640
254835
216423
218194
218153
010113
220209
019095
For Sales and Support call KMparts.com (866) 595-9616
Discount
List Price Schedule
28
28
28
28
28
12
28
28
28
28
28
28
12
28
28
28
28
28
28
12
28
28
28
28
28
28
12
28
28
28
28
28
28
12
28
28
28
28
28
28
12
28
28
28
28
28
28
98
98
98
98
98
98
98
22
82
82
82
82
82
82
20
20
21
575
575
575
575
575
670
670
670
670
670
670
670
810
810
810
810
810
810
810
860
860
860
860
860
860
860
980
980
980
980
980
980
980
365
365
365
365
365
365
365
380
380
380
380
380
380
380
315
315
465
465
540
255
440
6
18
18
14
3.10
4.30
4.30
20
25
25
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A
A
A
A20
A20
A20
13
Price List
Alphabetical Listing by Type
Type
RCDILE250
RCDILE48
S1DILEM
SSW120-0,5
SSW120-1
SSW40-0,3
SSW40-0,5
SSW40-1
SSW65-0,5
SSW65-1
V0DILE
VGDILE250
VGDILE415
VGDILE48
Z5/FF250-XHB
Z5/FF250-XHB-Z
Z5-100/FF250
Z5-125/FF250
Z5-160/FF250
Z5-220/FF250
Z5-250/FF250
Z5-70/FF250
Z5-FF250-XK-CNA
ZB12-0,16
ZB12-0,24
ZB12-0,4
ZB12-0,6
ZB12-1
ZB12-1,6
ZB12-10
ZB12-12
ZB12-16
ZB12-2,4
ZB12-4
ZB12-6
ZB150-100
ZB150-125
ZB150-150
ZB150-35
ZB150-50
ZB150-70
ZB32-0,16
ZB32-0,24
ZB32-0,4
ZB32-0,6
ZB32-1
ZB32-1,6
ZB32-10
ZB32-16
ZB32-2,4
ZB32-24
ZB32-32
ZB32-4
ZB32-6
ZB32-XEZ
ZB4-101-GF1
ZB65-10
ZB65-16
ZB65-24
ZB65-40
ZB65-57
ZB65-65
ZB65-XEZ
14
Article No. Page
046320
044264
220218
028319
028321
028286
028305
028306
028307
028316
026634
010336
010463
010320
215217
215218
210071
210072
210073
210074
210075
210070
229314
278431
278432
278433
278434
278435
278436
278440
278441
290168
278437
278438
278439
278464
278465
278466
278461
278462
278463
278442
278443
278444
278445
278446
278447
278451
278452
278448
278453
278454
278449
278450
278473
061360
278455
278456
278457
278458
278459
278460
278474
18
18
21
90
90
90
90
90
90
90
19
18
18
18
82
82
80
80
80
80
80
80
82
78
78
78
78
78
78
78
78
78
78
78
78
79
79
79
79
79
79
78
78
78
78
78
78
78
78
78
78
78
78
78
82
90
79
79
79
79
79
79
82
Discount
List Price Schedule
34
34
20
1172
1172
335
335
335
445
445
0.60
28
28
28
60
40
395
395
410
430
430
380
125
72
72
72
72
72
72
72
72
72
72
72
72
200
280
280
190
190
190
76
76
76
76
76
76
76
76
76
76
96
76
76
18
2
100
100
118
118
130
130
30
Type
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
E1
A20
A20
A20
A20
A20
A20
A20
ZE-0,16
ZE-0,24
ZE-0,4
ZE-0,6
ZE-1,0
ZE-1,6
ZE-12
ZE-2,4
ZE-4
ZE-6
ZE-9
ZEV
ZEV-XSW-145
ZEV-XSW-25
ZEV-XSW-65
ZEV-XSW-820
ZEV-XVK-20
ZEV-XVK-40
ZEV-XVK-80
ZW7-125
ZW7-160
ZW7-240
ZW7-290
ZW7-400
ZW7-540
ZW7-63
ZW7-90
Article No. Page
014263
014285
014300
014333
014376
014432
014752
014479
014518
014565
014708
209634
209637
209635
209636
209641
209643
209644
209645
004991
007364
009737
052448
045329
047702
000245
002618
For Sales and Support call KMparts.com (866) 595-9616
77
77
77
77
77
77
77
77
77
77
77
90
90
90
90
90
90
90
90
81
81
81
81
81
81
81
81
Discount
List Price Schedule
72
72
72
72
72
72
72
72
72
72
72
248
390
160
160
480
12
14
16
600
600
725
725
725
775
530
530
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
A20
www.moellerusa.com
Moeller Corporate Headquarters
4140 World Houston Parkway, № 100
Houston, Texas USA 77032
Tel 713.933.0999
Fax 832.613.6255
Moeller Canadian Head Office
7275 Rapistan Court
Mississauga, Ontario CANADA
L5N 5Z4
Tel 905.542.2323
Fax 905.542.2321
© 2005 by Moeller, Inc.
Technical and other changes reserved.
Publication: DILM-CAT-USA
Printed in the USA
09/05
Article No: 695001
For Sales and Support call KMparts.com (866) 595-9616
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement