ZS-HL datasheet
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 1 Mittwoch, 25. Februar 2009 2:19 14
The scalable high-precision laser measurement sensor
ZS-HL series
The ZS laser sensor family provides outstanding measurement performance on
all kind of materials. Its huge range of
sensor heads and scalable concept
makes it a versatile platform for all high
precision sensing applications.
• Highest resolution and dynamic
sensing range for all surfaces
• Modular and scalable platform
concept for up to 9 sensors
• Easy to use, install and maintain for all
user levels
• Fast response time of 110 µs
• Multi-tasking capability – manages up
to 4 measurement tools in one
controller
Ordering information
Sensors
ZS-HL-series sensor heads
Optical system
Sensing distance
20±1 mm
Regular reflective models
25±2 mm
50±5 mm
100±20 mm
Diffuse reflective models
600±350 mm
1500±500 mm
*1.
Beam shape
Line beam
Beam diameter
1.0 mmx20 µm
2.2 mmx45 µm
1.0 mmx30 µm
3.5 mmx60 µm
16 mmx0.3 mm
40 mmx1.5 mm
Resolution*1
0.25 µm
0.6 µm
0.25 µm
1 µm
8 µm
500 µm
Model
ZS-HLD2ST
ZS-HLDS2VT
ZS-HLDS5T
ZS-HLDS10
ZS-HLDS60
ZS-HLDS150
Resolution*1
Model
ZS-LD10GT
ZS-LD15GT
Refer to the table of ratings and specifications for details.
ZS-HL-series sensor heads (for nozzle gaps) also compatible with ZS-L controller
Optical system
Regular Reflective
*1.
Sensing distance
10±0.5 mm
15±0.75 mm
Beam shape
Line beam
Beam diameter
900x25 µm
0.25 µm
Refer to the table of ratings and specifications for details.
ZS-L-series sensor heads
Optical System
Regular reflective models
Sensing distance
20±1 mm
40±2.5 mm
50±5 mm
Diffuse reflective models
*1.
80±15 mm
130±15 mm
200 ±50 mm
350 ±135 mm
Beam shape
Line beam
Spot beam
Line beam
Line beam
Spot beam
Line beam
Line beam
Line beam
Spot beam
Beam diameter
900x25 µm
25 µm dia.
2000x35 µm
900x60 µm
50 µm dia.
900x60 µm
600x70 µm
900x100 µm
240 µm dia.
Resolution*1
0.25 µm
0.8 µm
2 µm
3 µm
5 µm
20 µm
Model
ZS-LD20T
ZS-LD20ST
ZS-LD40T
ZS-LD50
ZS-LD50S
ZS-LD80
ZS-LD130
ZS-LD200
ZS-LD350S
This is the peak-to-peak displacement conversion value in the displacement output at the measuring center distance in high-precision mode when the number of
samples to average is set to 128 and the measuring mode is set to the high-resolution mode. The standard workpiece is white aluminum ceramics in diffuse reflection mode and glass in the regular reflection mode.
ZS-HL series
1
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 2 Mittwoch, 25. Februar 2009 2:19 14
Sensor controllers
Shape
Supply voltage
Control outputs
NPN outputs
Model
ZS-HLDC11
24 VDC
ZS-HLDC41
PNP outputs
ZS-HLDC41A
(incl. USB cable +
Smart Monitor)
Multi controllers
Shape
Supply voltage
Control outputs
Model
NPN outputs
ZS-MDC11
PNP outputs
ZS-MDC41
24 VDC
Data storage units
Shape
Supply voltage
Control outputs
Model
NPN outputs
ZS-DSU11
PNP outputs
ZS-DSU41
24 VDC
Accessories (Sold separately)
Controller link
Extension cables for sensor heads
Shape
Model
Cable length
1m
4m
5m
8m
10 m
ZS-XCN
Panel mount adapter
Shape
Model
*1.
*2.
ZS-XPM1
ZS-XPM2
For 1st controller
For expansion (from
2nd controller on
Cables for connecting to a Personal Computer
Shape
Model
ZS-XRS2
Type
Qty
RS-232C
Model
ZS-XC1A
ZS-XC4A
ZS-XC5B*1,*2
ZS-XC8A
ZS-XC10B*1
Qty
1
1
1
1
1
Up to two [email protected] Cables can be connected (22 m max.).
A Robot Cable (ZS-XC5BR) is also available.
Logging software
Name
Smart Monitor Zero
Professional
Model
ZS-SW11E
Memory card
Model
F160-N64S(S)
QM300-N128S
F160-N256S
Model
64 MB
128 MB
256 MB
1
ZS-XUSB2 USB
Safety precautions for using laser equipment
Laser Label Indications
Attach the following
warning label to the side of
the ZS-L-series Sensor
Head.
2
Displacement sensors / Width-measuring Sensors
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 3 Mittwoch, 25. Februar 2009 2:19 14
Specifications
Sensor heads
ZS-HL-series sensor heads
Item
ZS-HLDS2T
ZS-HLDS2VT
ZS-HLDS5T
ZS-HLDS10
ZS-HLDS60
ZS-HLDS150
Applicable
controllers
ZS-HLDC series
Optical system
Regular
reflection
Diffuse
reflection
Regular
reflection
Regular
reflection
Diffuse
reflection
Regular
reflection
Diffuse
reflection
Diffuse
reflection
Diffuse
reflection
Measuring
center distance
20 mm
5.2 mm
25 mm
44 mm
50 mm
94 mm
100 mm
600 mm
1,500 mm
Measuring range
±1 mm
±1 mm
±2 mm
±4 mm
±5 mm
±16 mm
±20 mm
±350 mm
±500 mm
Light source
Visible semiconductor laser (wavelength: 650 nm, 1 mW max., JIS Clas
Beam shape
Line beam
Beam diameter*1
1.0 mmx20 µm
2.2 mm
x45 µm
1.0 mmx30 µm
Linearity*2
±0.05% F.S.
±0.2 %F.S.
±0.1% F.S.
Resolution*3
0.25 µm
(No. of samples to average:
256)
0.5 µm
(No. of samples to average: 128)
0.25 µm
(No. of samples to average:
512)
Temperature
characteristic*4
0.01% F.S./°C
0.1% F.S./°C
0.01% F.S./°C
Visible semiconductor laser
(wavelength 658 nm, 1 mW
max., Class 2)
3.5 mmx60 µm
1 µm
(No. of samples to average:
64)
0.3 mm
x16 mm
1.5 mm
x40 mm
±0.07 %F.S.
(250 mm to
750 mm)
±0.1% F.S.
(750 mm to
950 mm)
±0.2 %F.S.
8 µm
(average 64)
(at 250 mm)
40 µm
(average 64)
(at 600 mm)
500 µm
(average 64)
Sampling cycle
110 µs (high-speed mode), 500 µs (standard mode), 2.2 ms (high-precision mode), 4.4 ms (high-sensitivity mode)
Indicators
NEAR
indicator
Lits near the measurement center, and nearer than the measurement center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
FAR
indicator
Lits near the measurement center, and further than the measurement center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
Operating
ambient
illumination
Illumination on received light surface 3,000 lx or less (incandescent light)
Ambient
temperature
Operating: 0 to +50°C, storage: -15 to +60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Degree of
protection
IP64
Vibration
resistance
(destructive)
10 to 150 Hz, 0.7 mm double amplitude, 80 min each in X, Y, and Z directions
Shock resistance
(destructive)
150 m/s² 3 times each in six directions (up/down, left/right, forward/backward)
Materials
Case: aluminum die-cast, front cover: glass
IP67
Cable length
0.5 m, 2 m
Weight
Approx. 350 g
Cable length 0.5 m: IP66, cable length 2 m: IP67
2m
Illumination
on received
light surface
1,000 lx or
less (incandescent light)
Illumination
on received
light surface
500 lx or less
(incandescent light)
IP66 (IEC60529)
0.5 m, 2 m
Approx. 600 g
Approx. 800 g
F.S.: Full scale of measurement
*1.
*2.
*3.
*4.
Defined as 1/e² (13.5%) of the center optical intensity in the measurement center distance. The beam diameter is sometimes influenced by the ambient conditions
of the workpiece such as leaked light from the main beam.
This is the error on the measured value with respect to an ideal straight line. Linear curve may change according to the workpiece. The following lists the workpieces
Model
Diffusive reflection
ZS-HLDS2T
SUS block
Mirror reflection
Glass
ZS-HLDS5T/HLDS10
White alumina ceramic
Glass
ZS-HLDS60/HLDS150
White alumina ceramic
-
ZS-HLDS2VT
-
Glass
This is the “peak-to-peak” displacement conversion value of the displacement output in the measurement center distance when high-resolution mode and the average number in the table are set (For ZS-HLDS60, the maximum resolution at 250 mm is also included). The following lists the workpieces.
Model
Diffusive reflection
Mirror reflection
ZS-HLDS2T
SUS block
Glass
ZS-HLDS5T
White alumina ceramic
Glass
ZS-HLDS10
White alumina ceramic
ZS-HLDS60/HLDS150
White alumina ceramic
-
ZS-HLDS2VT
-
Glass
Value obtained when the sensor part and object part are fixed with an aluminum jig.
ZS-HL series
3
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 4 Mittwoch, 25. Februar 2009 2:19 14
ZS-L-series sensor heads
Item
Model
ZS-LD20T
ZS-LD20ST
ZS-LD40T
ZS-LD10GT
ZS-LD15GT
Applicable
controllers
ZS-HLDC/LDC series
Optical system
Regular
reflection
Diffuse
reflection
Regular
reflection
Diffuse
reflection
Regular
reflection
Diffuse
reflection
Regular reflection
Measuring center
distance
20 mm
6.3 mm
20 mm
6.3 mm
40 mm
30 mm
10 mm
15 mm
Measuring range
±1 mm
±1 mm
±1 mm
±1 mm
±2.5 mm
±2 mm
±0.5 mm
±0.75 mm
Light source
Visible semiconductor laser (wavelength: 650 nm, 1 mW max., JIS Class 2)
Beam shape
Line beam
Spot beam
Line beam
Beam diameter*1
900x25 µm
25 µm dia.
2,000x35 µm
Linearity*2
±0.1%F.S
Resolution*3
0.25 µm
0.25 µm
0.4 µm
0.25 µm
Temperature
characteristic*4
0.04% FS/°C
0.04% FS/°C
0.02% FS/°C
0.04% FS/°C
Sampling cycle*5
110 µs (high-speed mode), 500 µs (standard mode), 2.2 ms (high-precision mode), 4.4 ms (high-sensitivity mode)
Indicators
NEAR
indicator
Lights near the measuring center distance, and nearer than the measuring center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
FAR
indicator
Lights near the measuring center distance, and further than the measuring center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
Operating ambient illumination
Illumination on received light surface: 3,000 lx or less (incandescent light)
Ambient
temperature
Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Degree of
protection
Cable length 0.5 m: IP66, cable length 2 m: IP67
Materials
Case: Aluminum die-cast, front cover: Glass
Approx. 25x900 µm
0.25 µm
IP40
Cable length
0.5 m, 2 m
Weight
Approx. 350 g
Approx. 400 g
Accessories
Laser labels (1 each for JIS/EN, 3 for FDA), ferrite cores (2), insure Locks (2), instruction sheet
Laser safety labels (1 each for JIS/
EN),ferrite cores (2), insure locks
(2)
*1.
Defined as 1/e² (13.5%) of the center optical intensity at the actual measurement center distance (effective value). The beam diameter is sometimes influenced by
the ambient conditions of the workpiece, such as leaked light from the main beam.
*2.
This is the error in the measured value with respect to an ideal straight line. The standard workpiece is white aluminum ceramics in diffuse reflection mode and
glass in the regular reflection mode of the ZS-LD20T/40T/50. Linearity may change according to the workpiece.
*3.
This is the peak-to-peak displacement conversion value in the displacement output at the measuring center distance in high-precision mode when the number of
samples to average is set to 128 and the measuring mode is set to the high-resolution mode. The standard workpiece is white aluminum ceramics in diffuse reflection mode and glass in the regular reflection mode.
*4.
This is the value obtained at the measuring center distance when the Sensor and workpiece are fixed by an aluminum jig.
*5.
This value is obtained when the measuring mode is set to the high-speed mode.
Item
Model
ZS-LD50
ZS-LD50S
ZS-LD80
ZS-LD130
ZS-LD200
ZSLD350S
Applicable
controllers
ZS-HLDC/LDC series
Optical system
(reflection)
Diffuse
Regular
Diffuse
Regular
Diffuse
Regular
Diffuse
Regular
Diffuse
Regular
Diffuse
Measuring center
distance
50 mm
47 mm
50 mm
47 mm
80 mm
78 mm
130 mm
130 mm
200 mm
200 mm
350 mm
Measuring range
±5 mm
±4 mm
±5 mm
±4 mm
±15 mm
±14 mm
±15 mm
±12 mm
±50 mm
±48 mm
±135 mm
Light source
Visible semiconductor laser (wavelength: 650 nm, 1 mW max., JIS Class 2)
Beam shape
Line beam
Spot beam
Line beam
Line beam
Line beam
Spot beam
Beam diameter*1
900x60 µm
50 µm dia.
900x60 µm
600x70 µm
900x100 µm
240 µm
dia.
Linearity*2
±0.1%F.S.
Resolution*3
0.8 µm
0.8 µm
2 µm
3 µm
5 µm
20 µm
Temperature
characteristic*4
0.02% FS/°C
0.02% FS/°C
0.01% FS/°C
0.02% FS/°C
0.02% FS/°C
0.04%
FS/°C
Sampling cycle*5
110 µs (high-speed mode), 500 µs (standard mode), 2.2 ms (high-precision mode), 4.4 ms (high-sensitivity mode)
Indicators
NEAR
indicator
Lights near the measuring center distance, and nearer than the measuring center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
FAR
indicator
Lights near the measuring center distance, and further than the measuring center distance inside the measuring range.
Flashes when the measurement target is outside of the measuring range or when the received light amount is insufficient.
±0.25%
F.S.
Operating
ambient
illumination
Illumination on received light surface: 3,000 lx or less (incandescent light)
Ambient
temperature
Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
4
±0.1%F.S.
±0.25%
F.S.
±0.04%
F.S.
Illumination on received Illumination on received light surface:
light surface: 2,000 lx or 3,000 lx or less (incandescent light)
less (incandescent light)
Displacement sensors / Width-measuring Sensors
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 5 Mittwoch, 25. Februar 2009 2:19 14
Item
Model
Degree of
protection
ZS-LD50
ZS-LD50S
ZS-LD80
ZS-LD130
ZS-LD200
ZSLD350S
Cable length 0.5 m: IP66, cable length 2 m: IP67
Materials
Case: Aluminum die-cast, front cover: Glass
Cable length
0.5 m, 2 m
Weight
Approx. 350 g
Accessories
Laser labels (1 each for JIS/EN, 3 for FDA), ferrite cores (2), insure Locks (2), instruction sheet
*1.
Defined as 1/e² (13.5%) of the center optical intensity at the actual measurement center distance (effective value). The beam diameter is sometimes influenced by
the ambient conditions of the workpiece, such as leaked light from the main beam.
*2.
This is the error in the measured value with respect to an ideal straight line. The standard workpiece is white aluminum ceramics in diffuse reflection mode and
glass in the regular reflection mode of the ZS-LD20T/40T/50. Linearity may change according to the workpiece.
*3.
This is the peak-to-peak displacement conversion value in the displacement output at the measuring center distance in high-precision mode when the number of
samples to average is set to 128 and the measuring mode is set to the high-resolution mode. The standard workpiece is white aluminum ceramics in diffuse reflection mode and glass in the regular reflection mode.
*4.
This is the value obtained at the measuring center distance when the sensor and workpiece are fixed by an aluminum jig.
*5.
This value is obtained when the measuring mode is set to the high-speed mode.
Sensor controllers
ZS-HLDC11/HLDC41
Sensor controllers
Model
NPN/PNP
ZS-HLDC11
ZS-HLDC41
NPN
PNP
No. of samples to average
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1,024, 2,048, or 4,096
Number of mounted sensors
1 per sensor controller
External
interface
Connection method
Serial I/O: connector, other: pre-wired (standard cable length: 2 m)
Serial I/O
USB 2.0
1 port, full speed (12 Mbps max.), MINI-B
RS-232C
1 port, 115,200 bps. max.
Output
Judgement output
HIGH/PASS/LOW 3 outputs
NPN open collector, 30 VDC, 50 mA max.,
residual voltage 1.2 V max
Linear output
Selectable from 2 types of output, voltage or current (selected by slide switch on bottom).
Voltage output: .10 to 10 V, output impedance: 40 Ω
Current output: 4 to 20 mA
Laser OFF,
ZERO reset timing,
RESET
ON: Short-circuited with 0 V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)
Inputs
Functions
Measured value, threshold value, voltage/current, received light amount, and resolution/terminal
block output
Sensing:
Mode, gain, measurement object, head installation
Measurement point: Average, peak, bottom, thickness, step, and calculations
Filter:
Smooth, average, and differentiation
Outputs:
Scaling, various hold values, and zero reset
I/O settings: Linear (focus/correction), judgments (hysteresis and timer), non-measurement, and bank
(switching and clear)
System:
Save, initialization, measurement information display, communications settings, key lock, language, and data load
Task:
Single task or multitask (up to 4)
HIGH (orange), PASS (green), LOW (orange), LDON (green), ZERO (green), and ENABLE (green)
Main digital
Sub-digital
LCD
Setting inputs
ON: Short-circuited to supply voltage or within 1.5 V of
supply voltage.
OFF: Open (leakage current: 0.1 mA max.)
Display:
Status indicators
Segment display
HIGH/PASS/LOW: 3 outputs
PNP open collector, 50 mA max.,
residual voltage 1.2 V max
8-segment red LED, 6 digits
8-segment green LEDs, 6 digits
16 digitsx2 rows, colour of characters: green, resolution per character: 5x8 pixel matrix
Setting keys
Direction keys (UP, DOWN, LEFT, and RIGHT), SET key, ESC key, MENU key, and function keys (1 to 4)
Slide switch
Threshold switch (2 states: High/Low), mode switch (3 states: FUN, TEACH, and RUN)
Power supply voltage
21.6 V to 26.4 VDC (including ripple)
Current consumption
0.5 A max. (when sensor head is connected)
Ambient temperature
Operating: 0 to 50°C, storage: -15 to +60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Degree of protection
IP20
Materials
Case: Polycarbonate (PC)
Weight
Approx. 280 g (excluding packing materials and accessories)
Accessories
Ferrite core (1), instruction sheet
ZS-MDC11/MDC41 multi-controllers
Basic specifications are the same as those for the
sensor controllers.
The following points, however, are different.
(1) Sensor heads cannot be connected.
(2) A maximum 9 of controllers can be connected.
Control link units are required to connect controllers.
(3) Processing functions between controllers:
Math functions
ZS-HL series
Controller link unit
Controller Link Unit
Connection using
the ZS-XCN
Data Storage Unit
Multi-Controller
Sensor Controllers
5
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 6 Mittwoch, 25. Februar 2009 2:19 14
Data storage units
Sensor controllers
Model
Number of mounted censor heads
ZS-DSU11
ZS-DSU41
Cannot be connected
Number of connectable controllers
10 controllers max. (ZS-MDC: 1 controller, ZS-HLDC: 9 controllers max.)*1
Connectable controllers
ZS-HLDC_ _ , ZS-MDC__
External
interface
Connection method
Serial I/O: connector, other: pre-wired (standard cable length: 2 m)
Serial I/O
1 port, full speed (12 Mbps), MINI-B
USB 2.0
RS-232C
3 outputs: HIGH, PASS, and LOW
NPN open-collector, 30 VDC, 50 mA max.,
residual voltage: 1.2 V max.
3 outputs: HIGH, PASS, and LOW
PNP open-collector, 50 mA max.,
residual voltage: 1.2 V max.
Inputs
ON: Short-circuited with 0V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)
ON: Short-circuited to supply voltage or within 1.5 V of
supply voltage
OFF: Open (leakage current: 0.1 mA max.)
Data resolution
Functions
1 port, 115,200 bps max.
Outputs
32 bits
Logging trigger functions
Start and stop triggers can be set separately; external triggers, data triggers (self-triggers), and time triggers
Other functions
External banks, alarm outputs, saved data format customization, and clock
Status indicators
OUT (orange), PWR (green), ACCESS (orange), and ERR (red)
Segment display
8-segment green LEDs, 6 digits
LCD
Setting inputs
16 digitsx2 rows, colour of characters: green, resolution per character: 5x8 pixel matrix
Setting keys
Direction keys (UP, DOWN, LEFT, and RIGHT), SET key, ESC key, MENU key, and function keys (1 to 4)
Slide switch
Threshold switch (2 states: High/Low), mode switch (3 states: FUN, TEACH, and RUN)
Power supply voltage
21.6 V to 26.4 VDC (including ripple)
Current consumption
0.5 A max.
Ambient temperature
Operating: 0 to 50°C, storage: -15 to 60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Materials
Case: Polycarbonate (PC)
Weight
Approx. 280 g (excluding packing materials and accessories)
Accessories
Ferrite core (1) instruction sheet, tools for data storage unit: CSV file converter for data storage unit, smart
analyzer macro edition
(Excel macros for analysis of collected data)
*1.
6
Control link units are required to connect controllers.
Displacement sensors / Width-measuring Sensors
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 7 Mittwoch, 25. Februar 2009 2:19 14
Dimensions
Unit: mm
Sensor heads
ZS-HLDS2T
When used in diffuse reflection
Receiver section
Reference surface
26.4
2- ∅ 4.5 mm mounting hole
20
Reception axis
12
65
57
4
5.2
Operation indicator
57 ± 0.1
4
51.7
2-M4
4
Measuring center
77.2
4.7
32
20
Reception axis
18.1
49.3
13.8
20
Emission axis
Reference
Emitter section surface
20
30.1
Vinyl insulated round cable ∅ 6.8 mm
Standard length: 2 m
Measuring
center
50
78.4
25
6.5
24.1
65
56.5
25
Mounting hole dimensions
Emission axis
42
ZS-HLDS5T/HLDS10
ZS-HLDS5T when used in regular reflection
18
Reference surface
36
44.1
110.9
15
64.2
Measuring
center
9.5
69
100
Reference
A˚ (Note 1)
surface
Receiver
3∅
4.5
mm
mounting
hole
section
18.1
23.1
18.6
(15)
25
Reception
axis
82
92.1
46
Operation indicator
8
9.5
25
∅ 13
Emitter
section
3- ∅ 4.5 mm mounting hole
30
4
Emission axis
Measuring center
16.4
22.7
80
72
70
27
28.8
L (Note 1)
98.5
67.6
10.3
Emission axis
Optical axis
Reception axis
70 ± 0.1
9.5 ± 0.1
(5)
3-M4
69 ± 0.1
45.1
30.1
16.9
Vinyl insulated round cable ∅ 6.8 mm
Standard length: 2 m
42
Mounting hole dimensions
ZS-HLDS10 when used in regular reflection
94.1
15.6
2- ∅ 4.5 mm mounting hole
24.2
Emission axis
37.7
95.9
68.3
9.3
Measuring
center
25
109.6
In the case of ZS-HLDS5T, L=50, A=30˚
In the case of ZS-HLDS10, L=100, A=25˚
15.2
23.5
(Note 1):
65.3
12.5
Reception axis
ZS-HLDS60/HLDS150
19
38
Optical axis
Reference surface
L (Note 1)
Receiver section
75
65
5
22.7
Operation indicator
8
47
9.5
28
46
Reception axis
ZS-HL series
45 ± 0.1
Mounting hole dimensions
2
Vinyl insulated round cable ∅ 6.8 mm
Standard length: 0.5 m
(Note 1): In the case of ZS-HLDS60, L=600, A=7˚
In the case of ZS-HLDS150, L=1500, A=3˚
3-M4
30.1
57
(5)
25
16.4
A˚ (Note 1)
Emitter section
88.75
120
45
115.06
Emission axis
Reference
surface
∅ 13
102
65 ± 0.1
Measuring
center
42
7
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 8 Mittwoch, 25. Februar 2009 2:19 14
Sensor heads
Sensor controllers
ZS-LD50/LD50S/LD80/ZS-LD130/LD200/ZS-LD350S
L (Note 1)
4
65
8
Reference
surface
56±0.1
27.1
11
4.5
8
Measuring
center
60
56
65
Range
indicator
8
Reception
axis
4
M
2-
90
Emitter
Emission
axis
56±0.1
45
52.50
4.61
35
23.20
15.3
ZS-HLDC11/HLDC41
Two, 4.5 mm dia.
mounting holes
8
Receiver
4.5
Mounting hole dimensions
56
3.90
30.1
4.30
8.5
A (Note 1)
42
Vinyl insulated round cable,
6.2 mm dia.
Connector
13 10
18
32.90
Standard length: 0.5 m
L = 50, A = 25º
L = 50, A = 25º
L = 80, A = 15º
L = 130, A = 12º
L = 200, A = 8º
L = 350, A = 5º
24.20
Note 1 ZS-LD50:
ZS-LD50S:
ZS-LD80:
ZS-LD130:
ZS-LD200:
ZS-LD350S:
10.80
a.
.7
di
11
ZS-HLDS2VT/LD20T/LD20ST/LD40T
35
ZS-MDC11/MDC41 Multi-Controllers
Two, 4.5 mm dia.
mounting holes
65
L (Note 1)
27.1
56±0.1
52.50
60
8
Range
indicator
4
M
2-
90
Emitter
Emission
axis
Reception
axis
56±0.1
56
65
45
30
8
Reference
surface
Measuring
center
4
4.5
8
15.30
8
Mounting hole dimensions
30.1
4.30
8.5
56
3.90
4.5
A (Note 1)
42
Connector
10.80
Vinyl insulated round cable,
6.2 mm dia.
Note 1 ZS-LD20T: L = 20, A = 45º
ZS-LD20ST: L = 20, A = 45º
ZS-LD40T: L = 40, A = 32º
13 10
Standard length: 0.5 m
24.20
18
32.90
Receiver
a.
.7
di
11
ZS-LD10GT
ZS-LD15GT
105
115
8.5
8.5
42
15
Connector
42
40
30
25
Connector
12
30
85
Reception
axis
30 ± 0.1
8
44
45
4.
5
0
4- Ø 4.5 mounting hole
4- Ø 8 (counter bored 4)
M
40
20 ± 0.1
Mounting hole dimensions
8
Receiver
section
Measuring
center
90
Reception
axis
4-
29 ± 0.1
36
16
4
Mounting hole dimensions
26
4
M
3-
46 ± 0.1
76 ± 0.1
40
Emitter
section
16.5
24
Reference
surface
Emission
axis
30
20
Measuring
center
C
Emission axis
2-
96 ± 0.1
5
11.5
11.5
15
3- Ø 4.5
mounting hole
90
Vinyl insulated
round cable
Ø 6.2 mm
Standard length:
0.5 m, 2 m
84
74
55
44
10 10
56
12.50
17.50
25
55
45
Reference
surface
26 ± 0.1
45
35
30
Vinyl insulated round cable Ø 6.2 mm
Standard length: 0.5m, 2m
Emitter
section
Receiver
section
Displacement sensors / Width-measuring Sensors
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 9 Mittwoch, 25. Februar 2009 2:19 14
Panel mount adapters
Data storage unit
ZS-XPM1/XPM2 (Dimension for panel mounting)
ZS-DSU11/DSU41
(60 X n) + 12
60 X n
Panel
13
3
59.85
52.50
4.7
90
11
(140)
4.8
60
5.2
122
90
DIN track
Panel
Panel Mount Adapter
(37.5)
Panel cutout dimensions
3.90
(Note 1)
4.30
(2)
Note 1: Dimensions are shown for a panel thickness of 2.0 mm.
n: Number of gang-mounted Controllers (1 to 11)
10.80
24.20
18
32.90
116±1
13 10
a.
.7
di
11
(60 X n) + 8
ZS-HL series
9
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 10 Mittwoch, 25. Februar 2009 2:19 14
10
Displacement sensors / Width-measuring Sensors
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 11 Mittwoch, 25. Februar 2009 2:19 14
ZS-HL series
11
Q19E-EN-02+ZS-HL+Datasheet.fm Seite 12 Mittwoch, 25. Februar 2009 2:19 14
READ AND UNDERSTAND THIS DOCUMENT
Please read and understand this document before using the products.
Please consult your OMRON representative if you have any questions or comments.
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other
period if specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NONINFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF
THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF
THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE
PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT,
WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS
UNLESS OMRON's ANALYSIS CONFIRMS THAT THE PRODUCTS
WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
• Systems, machines, and equipment that could present a risk to life
or property.
Please know and observe all prohibitions of use applicable to the
products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING
THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN
THE OVERALL EQUIPMENT OR SYSTEM.
PERFORMANCE DATA
Performance data given in this document is provided as a guide for
the user in determining suitability and does not constitute a warranty.
It may represent the result of OMRON's test conditions, and the users
must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time
based on improvements and other reasons.
It is our practice to change model numbers when published ratings or
features are changed, or when significant construction changes are
made. However, some specifications of the product may be changed
without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on
your request. Please consult with your OMRON representative at any
time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
SUITABILITY FOR USE
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT
SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING SAFETY OF PERSONS, AND SHOULD NOT BE RELIED
UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE
FOR SUCH PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.
OMRON shall not be responsible for conformity with any standards,
codes, or regulations that apply to the combination of products in the
customer's application or use of the product.
At the customer's request, OMRON will provide applicable third party
certification documents identifying ratings and limitations of use that
apply to the products. This information by itself is not sufficient for a
complete determination of the suitability of the products in combination with the end product, machine, system, or other application or
use.
The following are some examples of applications for which particular
attention must be given. This is not intended to be an exhaustive list
of all possible uses of the products, nor is it intended to imply that the
uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or
electrical interference, or conditions or uses not described in this
document.
Cat. No. Q19E-EN-02
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to
separate industry or government regulations.
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is
believed to be accurate; however, no responsibility is assumed for
clerical, typographical, or proofreading errors, or omissions.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This document shall not be copied for sales or promotions without
permission.
This document is protected by copyright and is intended solely for use
in conjunction with the product. Please notify us before copying or reproducing this document in any manner, for any other purpose. If
copying or transmitting this document to another, please copy or
transmit it in its entirety.
In the interest of product improvement, specifications are subject to change without notice.
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: +31 23 568 13 00
Fax: +31 23 568 13 88
www.industrial.omron.eu
12
Displacement sensors / Width-measuring Sensors
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement