Lighting Fixture

Lighting Fixture
SeriesONE
1-Lamp Studio Fixture
5.73-in
[145.54-mm]
4.58-in
[116.33-mm]
23.17-in
[588.52-mm]
Distance From Subject
Photometrics
3-ft
.915-m
6-ft
1.83-m
9-ft
2.74-m
187
46 x 36
48
90 x 76
22
136 x 114
13
160 x 148
121
30 x 24
35
56 x 50
15.5
82 x 74
9
114 x 108
89.5
18 x 16
30
34 x 26
14
52 x 42
8.5
68 x 58
12-ft
3.66-m
No Accessories
Footcandles on Center
Beam Spread: W x H (inches)
w/ Broad Screen
Footcandles on Center
Beam Spread: W x H (inches)
w/ Narrow Screen
Footcandles on Center
Beam Spread: W x H (inches)
Footcandle measurements represent on-center readings taken using a Minolta T-I Illuminance meter. Beam spread
is determined by measuring from center out to 50% of peak in both the vertical and horizontal axes. This distance is
then doubled to give the overall beam pattern.
580 Mayer Street - Building # 7 - Bridgeville, PA 15017 USA
Phone: 1.412.206.0106 - Fax: 1.412.206.0146
© 2014 Brightline LP All Rights Reserved
02/04/14
Specifications are subject to change without notice.
SeriesONE
1-Lamp Studio Fixture
Housing
14-gauge formed aluminum sheet metal construction.
24-gauge formed aluminum reflector. Mineral bronze
finish (Cardinal #T025-BR01) is standard, with custom
colors available.
Accessories
A variety of accessories are available. Black finish on
accessories is standard, with custom color available on
request.
Weight
S1.1 fixture is 9-lb (4.1-kg) with screen; includes yoke,
c-clamp, palm handles, lamps and power cord.
Reflector
24-gauge (.020-in) formed aluminum sheet metal
construction. Polished spectral finish. 95% specular
reflectance.
Mounting
Fixture has a 10-gauge horizontal or vertical extruded
aluminum yoke, with palm handles standard. Each
fixture is supplied with a 2-inch OD C-clamp with an
integral safety cable.
Electrical
A removable 12-ft (3.7m) power cord with a NEMA
5-15P plug is standard. Other plug types are available
as options. The fixture is protected by an externally
removable fuse with onboard spare.
Switch
Onboard, rocker ON/OFF switch.
1 - Lamp
Shipping Information
Ballasts
Ballasts are availble for 120V, 230V or 277V 50-60 Hz
operation. Ballasts are high-frequency electronic with a
power factor > .97%, Class A sound rating, a THD, 10%.
Dimming fixtures may be controlled by a low-voltage (0 to
+10VDC) analog source, by line-voltage dimmer, by DALI
digital, or DMX-512. A converter is available to change
DMX-512 to DALI to drive the digital fixtures.
Length: 24-in (610-mm)
Width: 9-in (229-mm)
Height: 9-in (229-mm)
Weight: 12-lb (6.8-kg)
SeriesONE 1-lamp fixture; shown with vertical yoke configuration.
Lamps
(1) 55W/21T5/2G11RS 3000°K available with 10,000hour rated life; 3200°K & 5600°K available with 8,000hour rated life.
Dimensions
S1.1 fixture is 23.17-in (590-mm) wide x 5.74-in (146mm) high x 4.58-in (116-mm) deep.
Rear of phase Dimmed Fixture showing Power In and Thru and On/Off
Switch; Non-Dim similar.
S
SeriesONE
Lamps
Ballast Type
Voltage
Digital Control
1.1 = 1-Lamp Fixture
E = Ecosystem
1 = 120V
DLI = DALI Dimmable
N = Non-Dim
2 = 230V
P = Phase
R = Rotary
* Only use DLI when using
a Digital “X” ballast*
X = Digital
Note: Phase-Dim ballasts are not available in 230V.
Note: Custom Finish is available. Add a “-CF” to the end of the part number.
Note: Fixtures require Control Screens and Lamps; see Fixture Accessories and Lamps data sheet for options.
Note: Fixtures with Ecosystem or 277V ballasts are provided with bare-lead connections for power.
580 Mayer Street - Building # 7 - Bridgeville, PA 15017 USA
Phone: 1.412.206.0106 - Fax: 1.412.206.0146
© 2014 Brightline LP All Rights Reserved
Specifications are subject to change without notice.
02/04/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement