IMC-1000S - Неуправляемый индустриальный Gigabit Ethernet медиаконвертер

IMC-1000S - Неуправляемый индустриальный Gigabit Ethernet медиаконвертер
Industrial Unmanaged GbE Converter
EN50121-4
EN61000-6-2
EN61000-6-4
IMC-1000S
5
100/1000Base–T to 100/1000Base–X SFP
Slot Fiber Converter
Features
▪▪Redundant dual DC input power 12/24/48VDC (9.6 ~ 60VDC)
▪▪IP30 rugged metal housing and fanless
▪▪Wide operating temperature -20 ~ 75°C
▪▪UL60950-1, CE, FCC, Railway traffic EN50121-4 certification
▪▪Industrial Grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
▪▪Store-and-Forward mode and Pass through mode (set by DIP SW)
▪▪Conversion between 10/100/1000Base-T and 100/1000Base-X
▪▪Provides a DIP-Switch to set functions
▪▪Supports LFPT (Link Fault Pass Through)
Fiber cable interface
Specifications
Standard
IEEE802.3 10Base-T 10Mbit/s Ethernet
IEEE802.3u 100Base-TX, 100Base-FX, Fast Ethernet
IEEE802.3ab 1000Base-T Gbit/s Ethernet over twisted pair
IEEE802.3z 1000Base-X Gbit/s Ethernet over Fiber-Optic
IEEE802.3x Flow Control
RJ45 Ports
10/100/1000Base-TX
Fiber Ports
SFP Slot
Data Process Store and Forward mode or Pass through mode set by
Architecture DIP SW
Jumbo Frame 9K bytes
Fiber
Fiber Cable (Multi-mode): 50/125um, 62.5/125um
Parameters
Fiber Cable (Single-mode): 9/125um
Wavelength: 1310nm (Multi-mode/Single-mode)
SFP, Distance depend on Fiber Tranceiver
Link Fault Pass TX-Fiber: If TX port link down, the media converter will
Through
force Fiber port to link down
(LFPT)
Fiber-TX: If Fiber port link down, the media converter will
force TX port to link down
DIP Switch
Off: Alarm For Power Enable On: Alarm For Power Disable
Off: Alarm For Port Enable On: Alarm For Port Disable
Off: LFPT Disable
On: LFPT Enable
Off: Switch Mode On: Converter Mode
Off: 1000Base-X
On: 100Base-FX
Connector
SFP Slot
RJ-45 Socket:
CAT 5e Twisted Pair cable Auto MDI/MDI-X and AutoNegotiation Function Supports
LED
Per Unit: Power 1 (Green), Power 2 (Green), Fault (Amber)
LNK/ACT for Fiber(Green):
ON : Connected to network/ OFF : Not connected to network/
BLK : Receive /Transmit Data
SFP Fiber speed:
Yellow : 1000Base-X Green : 100Base-FX
LED
RJ-45 port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow)
LNK/ACT for RJ45(Green):
ON: Connected to network/ OFF: Not connected to
network/
BLK: Networking is active
Reserve
Polarity
Present
Protection
Overload
Current
Present
Protection
Power Supply 12/24/48VDC (9.6~60VDC) , Redundant power with
polarity reverse protect function and removable terminal
block
Provide DC Power JACK adapter cable for external Power
adapter
Power
Consumption 4.2W
Alarm Relay
Relay outputs with current carrying capacity of 1 A
Contact
@24VDC
Removable
Terminal Block Provides 2 Redundant power, Alarm relay contact
Operating
5% ~ 95% (Non-condensing)
Humidity
Operating
-10 ~ 60°C (IMC-1000S)
Temperature -20 ~ 75°C (IMC-1000S-E)
Storage
Temperature -40 ~ 85°C
Housing
Rugged Metal, IP30 Protection and fanless
Dimensions
106 x 38 x 142 mm (D x W x H)
Weight
620g (IMC-1000S, IMC-1000S-E)
Installation
DIN Rail or wall mounting
MTBF
578,980Hrs (IMC-1000S, IMC-1000S-E)
Warranty
5 years
Certification
EMC
CE
EMI
(Electromagnetic FCC Part 15 Subpart B Class A,CE EN55022 Class A
Interference)
Railway Traffic EN50121-4
Immunity for
Heavy
EN61000-6-2
Industrial
Environment
Emission for
Heavy
EN61000-6-4
Industrial
Environment
www.ctcu.com
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
[email protected]
5-45
Industrial Unmanaged GbE Converter
IMC-1000S is an industrial grade, non-managed, Gigabit Ethernet media converter that supports conversion between electrical 10/100/1000Base-T
and optical 100/1000Base-X Ethernet. Simple DIP switch settings allow configuring the UTP port for auto-negotiation or for forced 10/100/1000
speed and half/ full duplex as well as for enabling LFPT (Link Fault Pass Through), Ethernet flow control (802.3x) and selecting Switch Mode (store
& forward) or Converter Mode (Jumbo frame Pass-through). Housed in rugged DIN rail or wall mountable enclosures, these converters are
designed for harsh environments, such as industrial networking and intelligent transportation systems (ITS) and are also suitable for many
military and utility market applications where environmental conditions exceed commercial product specifications.
Industrial Unmanaged GbE Converter
EMS
Safety
Shock
Freefall
Vibration
EN61000-4-2 (ESD) Level 3, Criteria B
EN61000-4-3 (RS) Level 3, Criteria A
EN61000-4-4 (Burst) Level 3, Criteria A
EN61000-4-5 (Surge) Level 3, Criteria B
EN61000-4-6 (CS) Level 3, Criteria A
EN61000-4-8 (PFMF, Magnetic Field) Field Strength:
300A/m, Criteria A
UL60950-1
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Application & Topology
Figure : IMC-1000S Media Converter Transmission
-1
IMC
000
S
-1
IMC
000
S
PC
abit
Gig
et
ern
Eth
PC
r
Fibe
PC
abit t
Gig
e
ern
Eth
PC
Dimensions
30.00
38.60
15.20
106.00
45.72
184.00
50.53
142.10
14.50
30.00
4.57
Side View
5-46
Front View
Rear View
DIN-Rail Kit View
Wall-Mount Kit View
www.ctcu.com
[email protected]
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
Industrial Unmanaged GbE Converter
Ordering Information
UTP
Fiber
10/100/1000
Base-T
Dual Speed
100/1000Base-X
Safety
UL60950-1
Railway
EN50121-4
EN61000-6-2
EN61000-6-4
CE
FCC
IMC-1000S
1
1 SFP
V
V
V
V
V
IMC-1000S-E
1
1 SFP
V
V
V
V
V
Model Name
Certification
Operating
Temperature
-10~60℃
-20~75℃
5
Model Naming Rule
1000: 1000Base-X
Converter
E: -20~75 C
Blank: -10~60 C
S: SFP type
Package List
Optional Accessories
Industrial Power Supply
DR-4524
MDR-40-24
Industrial Unmanaged GbE Converter
Industrial
Media
Converter
E
S
1000
IMC
Industrial Power, Input 85 ~ 264VAC, Output 24VDC, 48W, -10 ~ +50°C
Industrial Power, Input 85 ~ 264VAC, Output 24VDC, 40W, -20 ~ +70°C
Industrial SFP Transceiver
(The ISFP series of industrial grade SFP modules have been fully tested with the IMC-1000S product for guaranteed compatibility and
performance. The best performance can be guaranteed even in mission-critical applications.)
(Please see CTC Union’s Industrial SFP datasheet for more details and more items.)
ISFP-M7000-85-(E)
Industrial SFP GbE 1000Base-SX, M/M, 500 meter,wave length 850nm, 7.5dB, LC, -10~70°C (-40~85°C)
ISFP-S7020-31-(E)
Industrial SFP 1000Base-LX, S/M, 20km, wave length 1310nm, 15dB, LC, -10~70°C (-40~85°C)
ISFP-T7T00-00- (E)
Industrial SFP 1000Base-T UTP 100meter, -10~70°C (-40~85°C)
ISFP-M5002-31-(E)
Industrial SFP 155M 100Base-FX, MM, 2km, wave length 1310nm, 12dB, LC, -10~70°C (-40~85°C)
ISFP-S5030-31-(E)
Industrial SFP 155M 100Base-FX, SM, 30km, 1310nm, 19dB, LC, -10~70°C (-40~85°C)
ISFP-T3T00-MA-(E)
Industrial SFP 100Mbps , long reach UTP (2 wire) (500meter) , Master, -10~70°C (-40~85°C)
ISFP-T3T00-SL-(E)
Industrial SFP 100Mbps , long reach UTP (2 wire) (500meter) , Slave, -10~70°C (-40~85°C)
•
•
•
•
•
•
•
IMC-1000S device
Quickly installation guide
Din Rail bracket with screws
Wall mount bracket with screws
Terminal block
Protective caps for SFP ports
DC Power JACK adapter cable
SFP Naming Rule
ISFP
Industrial
SFP
Transceiver
M
7
040
M: Multi Mode
S: Single Mode
T: UTP
9: 10G
7: GbE
5: FE
3: Long
Reach
UTP
31
Distance
T00: (UTP)
000: (500m)
002: (2km)
020: (20km)
040: (40km)
D
E
E:-40~85 C
Blank:0~70 C
Wavelength
D: DDMI
00: UTP
Blank: Non DDMI
85: 850nm
31:1310nm
55:1550nm
WA: TX/1310nm (Bidi mode A)
WB: TX/1550nm (Bidi Mode B)
MA: Master (for Long Reach UTP)
SL: Slave (for Long Reach UTP)
www.ctcu.com
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
[email protected]
5-47
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement