CSI500FT
CSI500-FT SERIES
DC / AC Sine Wave Inverters: 500 VA
Features
x
x
x
x
x
x
x
x
x
x
x
General Specifications
Input Voltage
24VDC, 36VDC, 48VDC, 125VDC, 250VDC
x
Other input voltage options on request
Input Range
±-15% of input, other options on request
Input Protection
Inrush current limiting
Internal safety fuse,
Reverse Polarity Protection
Isolation
For input > 60vdc : Input – Output: 2250vdc
For input <60vdc: Input – Output: 1500vdc
x
Other options on request
EMI
EN55011 Class A conducted
Immunity
EN 61000-4
Output voltage
115VAC / 230VAC options
Output neutral connected to chassis internally.
Isolated / Floating output option
Sinusoidal output waveform
500VA output power
Convection cooled – No Fans
Frequency options 50Hz / 60Hz / 400Hz
Wide range of input options: 24 ~ 250VDC
Optional output fail alarm on some models
Low profile 67mm
Rugged design for harsh environments
Full electronic protection
Non standard input voltage options
RSI series ( Rail Spec ) -option
Description
The CSI500 is rugged DC/AC inverter uses field proven,
microprocessor controlled high frequency PWM technology to
generate 500VA output power with pure sign wave output voltage.
It is a mature design with a track record in numerous applications.
The DC/DC input stage boosts the input voltage to a higher DC
voltage, which feeds the DC/AC inverter to generate the required AC
output.
The use of high frequency conversion enables a compact
construction, low weight and high efficiency. The unit has full
electronic protection. The input and output are filtered for low noise.
Cooling is via baseplate to a heatsinking surface and by natural
convection.
Options
( may not be available on all combinations )
Alarms
Output Fail Alarm: voltage free relay contacts
Remote Inhibit
Remote ON / OFF
Ruggedized
Conformal coating and Ruggedization for use in
harsh environments.
Slow start up option for powering fans
Output Waveform
Sinusoidal
Harmonic
Distortion
Less than 5% at 100% load.
Output Freq.
50Hz, 60Hz, 400Hz options
Load Crest Factor
Maximum 3% at 90% load
Output Power
500VA
Regulation
Load: ±2% from 10% to 100% load step.
Line: ±1.0% over input range
Output Noise
High Frequency ripple is better than
500mVrms ( 20MHz BW )
Protection
Current limiting with short circuit protection
Self re-setting thermostat for thermal
protection
Output Over
Voltage Protection
Output voltage is limited by internal supply
voltage
Efficiency
Input voltage / model dependent typically
80% at 100% load
Operating Temp
0ºC to +50ºC at rated load.
Other options on request
Cooling
Convection / Conduction cooled
Shock & Vibration
Designed to meet IEC61373 Cat 1 A & B
9 = 96V
Humidity
5-95% non-condensing
108 = 108V
MTBF
>130,000 hrs at 45ºC
LED Indicator
Optional
5 = 125V
6 = 250V
Connector
Terminal block, other options on request
Dimensions
254 x 67 x 361mm ( F21 )
Weight
4.2kg
Slow Start
Connector
A variety of terminals / connectors available to suit
special customer requirements
Rack Mount
2U x 19in Rack Mount
Model No Example:
CSI500-4E-FT
( 48VDC / 230VAC 50Hz )
CSI
Power
CSI
500
Input Vdc
Output
FT
2 = 24V
A = 115V/60Hz
Std
Package
3 = 36V
4 = 48V
7 = 72V
1.
2.
3.
E = 230V/50Hz
M = 115V/400Hz
Standard input / Output combinations are illustrated.
Non standard combinations are available on request
Final Part no will be allocated at time of order to reflect customer
specifications and options.
REV 19-05-10
!
,.
,)-
!
+++,)-++,)--
)+)
MTEX )
'
'*
MTEX ELECT)
'
"#$%&
/$01
)3
)
)
)
)3
2)
)
)
)
)
)
)
)
)
)*
)
)
2)
DC / AC Sine Wave Inverters: 500 VA
CSI500-FT SERIES
)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement