Max-Air 90 Standard Gas Compressor
MAX-AIR 90 Std GH (Honda
®
High pressure, breathing
air compressor for SCUBA,
SCBA & Paintball.
Designed for economy,
mobility and simplicity at
an affordable price, loaded
with standard features.
Air to Go...
The Max-Air 90 Standard is a dependable, high Breathing air quality
meets or exceeds:
quality, breathing air compressor designed for
NFPA 1500
continuous duty at an affordable price.
CGA “E”
Heavy duty design has commercial, marine,
EN 12021
military, dive, police, paintball and fire
department applications. You will find the
Max-Air 90 Standard is ideal for dive centers,
pleasure boats or fixed installations.
Compare the Max-Air 90 Standard prices and features with
any of the competition.
Available in a variety of drive units to fit any requirement.
Standard Features included in base price:
• Max-Air 90 Standard – 10.8 scfm** 5000 psi
• Reliable air cooled, rope start, 9HP Honda® gasoline engine
• Mounted on a durable, heavy duty, powder coated, steel frame
• Adjustable engine/belt tensioning base
• Tri-chem breathing air purification system with activated carbon/
molecular sieve 13X /hopcalite
• Disposable purification cartridge is easy to replace
• Breathing air processing capacity of 10,000 cft @ 72°F or prox
18 hours run time
• Digital Hour/Tachometer (standard on gasoline models only)
• New large capacity separators for Hot/Humid climates
• Manual condensate drains
• Pressure maintaining valve
• Automatic shut down pressure switch #AS-1001
• Pressure relief valve on all stages
• Intake filter
• Final pressure gauge
• Engine oil drain extension tube
• 58 oz (1.7 Lt) MaxLube 501 synthetic compressor oil
(1st oil change)
(2)
• filling hose with On/Off valve and Bleed (SCUBA yoke,
SCBA, DIN300 or Paintball)
• 6 foot, rigid, two piece intake tube; easy to stow
• Spare parts list and owner’s manual
• One year warranty
Model Max-Air 90-Std GH (Weight & Dimensions Prox)
276 lbs
Length 42” x Depth 20” x Height 29”
Noise level 91 dB at 3 meters
© Max-Air 2009 PRO/90GSTD rev.1009/a
Gas)
5000 psi
10.8 scfm
TM
Charging rate 10.8 SCFM**; 9.0 F.A.D.
(Fill time for 80 cu. ft. cyl 7.5 min*)
Will fill SCBA’s to 4500 psi
Specifications Pumping Group***
•
H
Made
in Texas
U.S.A.
Construction:
Continuous duty, air cooled, three stage, three
cylinder high pressure compressor.
ALL STAINLESS STEEL INTERSTAGE AND FINAL STAGE COOLERS.
Max Pressure:
5000 psig-340 bar
Output Prox.:
9.0 F.A.D. 10.8 scfm charging rate**
Lubrication:
Splash lubrication with oil thrower pin
Oil Type:
MaxLube 501 synthetic compressor oil
Drive:
Air cooled, rope start, 9 HP, Honda® engine
Refill Time Output
10.8 scfm**, 7.5 minutes*
*Time required to fill an 80 cu. Ft. cylinder from 500 to 3000 psig
**Based on charging an 80 cu. Ft. cylinder from 500 to 3000 psig
*** Specifications and prices subject to change without notice
•
•
•
•
•
Factory Options not included in base price:
 CD-1000+
 IS-1000
 MI-4000
 LO-1005+
 HT-1006+
 ES-90-G
 BP-12V-G
 PU-35000
Automatic condensate drain with timers preset to
drain periodically and on shut down
Interstage pressure gauges
Air line visual Moisture/CO indicator for cartridge life
Low oil shut down switch
High temperature shut down switch
Electric start engine with battery recharge
Battery package
Up-grade purification capacity to 35,000 cft @ 72°F
or prox 65 hours run time
+Can only be installed with ES-90-G, BP-12V-G unless 12 VDC power
is supplied by customer
2807 Peddler Lane West • Kerrville • Texas 78028 • USA
Tel. (830) 257-5006 • Fax (830) 257-3720 • e-mail: [email protected]
www.max-air.com
Max-Air is a registered trademark with the U.S. Patent Office and cannot be duplicated without the express, written consent of Max-Air.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement