Manual 13256420
41CH CUT-OFF WHEEL, REINF.
EC-Material Safety Data Sheet
Version/date:000002/07.03.08
Print date: 11.03.08
page 1 of 4
FEDERATION EUROPEENNE DES
FABRICANTS DE PRODUITS ABRASIFS
MATERIAL SAFETY DATA SHEET FOR ORGANIC BONDED ABRASIVES
1.
STIHL Abrasive Wheels
For Asphalt & Ductile Iron
Identification of Product and Company:
1.1 Product Name:
TYROLIT Type No.:386004, 386006, 386009, 386012, 386013
STIHL article no.: 0835 030 8000/8003/8001/8004/8002
41CH CUT OFF WHEEL, REINF.
Distributed by:
STIHL Incorporated
536 Viking Drive
Virginia Beach, VA 23452
(757) 486-9100
Various dimensions
AC30-BF & AC30-BF/100
1.2 Application
Organic bonded abrasives used for grinding/cutting of different materials
1.3 Company identification:
Company: TYROLIT Schleifmittelwerke Swarovski KG
Address:
Swarovskistrasse 33
A-6130 Schwaz
Phone:++43 5242 606 2572
Fax:++43 5242 606 12572
E-mail: [email protected]
1.4 Emergency number: Europe 112
2. Hazards Identification
Not applicable
Abrasives are not dangerous substances or preparations as defined in EC directive No 99/45.
See also section 8 and 16.
3. Composition/Information on Ingredients
The product contains the following marking required ingredients as per 67/548 EEC and 99/45 EC
Name
EG Nr.
Concentration
Classifi-
(ELINCS/EINECS)
area
cation
-
<15%
Xn; Xi
CAS
R- Phrases
potassium
aluminium
60304-36-1
cryolite
4. First Aid Measures
See also section 8 and 16
Inhalation:
not possible, due to the form of the product
Eye contact:
not possible, due to the form of the product
Skin contact:
no harmful effects known
Ingestion:
not likely, due to the form of the product
Copyright FEPA, 20 Avenue Reille F-75014 PARIS
R22 R36/37/38
41CH CUT-OFF WHEEL, REINF.
EC-Material Safety Data Sheet
Version/date:000002/07.03.08
Print date: 11.03.08
page 2 of 4
FEDERATION EUROPEENNE DES
FABRICANTS DE PRODUITS ABRASIFS
If necessary contact physician
5. Fire Fighting Measures
Toxic fumes may occur. Use respiratory protective equipment.
Extinguishing Media: water, foam, sand, powder or C02 as appropriate for surrounding materials
6. Accidental release measures
Not applicable.
7. Handling and Storage
Follow instructions and the relevant national regulations. In addition, observe the safety recommendations of the
manufacturer.
8. Exposure Controls / Personal Protection
Before grinding risk assessment should be performed and individual personal protection measures adopted
accordingly.
8.1.
Exposure Limits
Keep limits of the following components under surveillance : not applicable
(Observe the regional official regulations for dust)
Note: Hazardous dust of workpiece material may be generated during grinding and/or sanding operations.
8.2.
Exposure control and limitations
8.2.1. Exposure control and limitations of the work environment
Observe the regional official regulations for dust
8.2.1.1. Respiratory protection: Use respiratory equipment
(type depends on specific application and material being ground)
8.2.1.2. Hand protection: Wear protective gloves
(type depends on specific application and material being ground)
8.2.1.3. Eye protection: Wear protective goggles or face shield
(type depends on specific application and material being ground)
8.2.1.4. Hearing protection: Use hearing protection
(type depends on specific application and material being ground)
8.2.1.5. Body protection: Use protective clothing
(type depends on specific application and material being ground)
9. Physical and Chemical Properties
9.1
9.2
9.3
Physical state:
Colour:
Solubility in water:
Copyright FEPA, 20 Avenue Reille F-75014 PARIS
solid
not defined
not defined
41CH CUT-OFF WHEEL, REINF.
EC-Material Safety Data Sheet
Version/date:000002/07.03.08
Print date: 11.03.08
page 3 of 4
FEDERATION EUROPEENNE DES
FABRICANTS DE PRODUITS ABRASIFS
10. Stability and Reactivity
Stability
Bonded Abrasives are stable when handled or stored
Reactivity
10.1
Conditions to avoid:
No decomposition in normal storage.
10.2
Materials to avoid:
No dangerous reactions known.
10.3
Hazardous decomposition products:
At temperatures exceeding 250° C hazardous or toxic decomposition products my be generated
11. Toxicological Information
No toxicological effects if inhaled or swallowed or with eye or skin contact are known.
See also section 8.
12. Ecological Information
12.1
12.2
12.3
12.4
12.5
Ecotoxicity:
Mobility:
Persistence and degradability:
Bioaccumulative potential:
Other hazardous effects:
no effects known
no potentials known
no biodegradable potentials known
no potentials known
no effects known
13. Disposal Considerations
13.1. Product
Follow national and regional regulations!
X
13.2.
Due to the ingredients (sum concentration under the limit) disposal as non hazardous waste (2000/532/EC)
is possible if no hazardous materials are added to the abrasives. (EWC Nr. 120121),
Packing
Follow national and regional regulations!
14. Transport Information
The product is not covered by international regulation on the transport of dangerous goods.
15. Regulatory Information
Copyright FEPA, 20 Avenue Reille F-75014 PARIS
FEDERATION EUROPEENNE DES
FABRICANTS DE PRODUITS ABRASIFS
41CH CUT-OFF WHEEL, REINF.
EC-Material Safety Data Sheet
Version/date:000002/07.03.08
Print date: 11.03.08
page 4 of 4
No specific marking requirements under respective EC directives
16. Other Information
R 22
R 36/37/ 38
Harmful if swallowed
Irritating to eyes, respiratory system and skin
The above information is based on our current standard of knowledge and does not constitute any warranty of
conditions of the product. The information does not form part of any contractual agreement. It remains the user s
responsibility to adhere existing laws and regulations.
Issued by: Environmental Department
TYROLIT Schleifmittelwerke Swarovski KG
Contact: DI Antje Schwemberger
[email protected]
Tel: ++43 5242 606 2572
Copyright FEPA, 20 Avenue Reille F-75014 PARIS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement