CHEMTRONICS TDS # SWick

CHEMTRONICS TDS # SWick
CHEMTRONICS
TDS # SWick
Technical Data Sheet
Soder-Wick Desoldering Braid
PRODUCT DESCRIPTION
Soder-Wick offers the state of the art in
desoldering technology. Soder-Wick is
designed for today’s heat sensitive
electronic components using lighter mass,
pure copper braid construction that allows
for better thermal conductivity, even at low
temperatures. Soder-Wick responds faster
than conventional desoldering braids
thereby minimizing overheating and
preventing PCB damage. A full range of
sizes and flux types are available, including
Rosin, No Clean, unfluxed and a high
temperature Lead-Free version. Whatever
the requirement, Soder-Wick has the
answer.
! Requires little or no post solder cleaning
! No corrosive residues
! Optimized construction for faster
wicking and heat transfer
! Halide free
! Minimizes the risk of heat damage to
components and circuit boards
TYPICAL APPLICATIONS
Soder-Wick desoldering braid safely
removes solder from:
! Thru-hole Components
! SMT Pads and BGA Pads
! Micro Circuits
! Terminals
! Lugs and Posts
! Identification Script
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Flux Types:
Specifications:
Rosin Grade WW, Type “R”
Patented No Clean
High Temperature No Clean
ANSI/IPC J STD-004
MIL-F-14256 F
No Clean Flux Spec:
MIL-STD-883B
Bellcore TR-NWT-000078
ANSI/IPC J SF818
Shelflife:
2 years
Size #
1
Width
Inches
.030”
Color
White
Width
Metric
0.8mm
2
.060”
Yellow
1.5mm
3
.080”
Green
2.0mm
4
.110”
Blue
2.8mm
5
.145”
Brown
3.7mm
6
.210”
Red
5.3mm
BGA
-
Purple
-
STATIC DISSIPATIVE PACKAGING
Soder-Wick SD is packaged on Static
Dissipative bobbins in 5 and 10-foot lengths
to minimize the risk of damage associated
with static electricity. The static dissipative
bobbins qualify as electrostatic discharge
protective per MIL-STD-1686C and MILHDBK-263B, and meet the static delay rate
provision of MIL-B-81705C.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
1) Choose a Soder-Wick desoldering braid width
equal to or slightly larger than the pad or
connection.
2) Choose a solder iron tip equal to or slightly
larger than the pad or connection.
3) Set temperature of iron between 600-750°F
4) Place wick on solder joint and place tip of hot
iron on top of wick
5) As solder becomes molten, the color of the wick
will change from copper to silver.
6) Remove wick and iron from solder joint
simultaneously once color change has stopped.
7) The component lead / pad is now clean and free
from solder.
8) Clip and discard the used portion of the wick.
9) If needed, clean PCB with CircuitWorks Flux
Remover Pen and remove soils with a
ControlWipes absorbent wipe.
AVAILABILITY
Series:
40
50
80
60
70
75
Soder-Wick Lead-Free, SD Bobbin
Soder-Wick Rosin
Soder-Wick Rosin, SD Bobbin
Soder-Wick No Clean, SD Bobbin
Soder-Wick Unfluxed
Soder-Wick Unfluxed, SD Bobbin
VacuPak Packaging
The VacuPak Can contains ten five-foot bobbins
in a vacuum sealed can. This package provides
the highest level of cleanliness and freshness.
Great for tool kit storage.
HELPFUL HINTS:
Water Soluble Users:
Use Soder-Wick
Unfluxed 70 or 75 Series to dip in water soluble
flux and then desolder normally.

Ball Grid Array: Use Soder-Wick BGA with a
large tipped iron to remove solder from a number of
BGA pads all at once.

SODER-WICK IS DESIGNED TO MEET
OR EXCEED THE FOLLOWING:
MIL-F-14256F, Type R
NASA-STD-8739.3
DOD-STD-883E, Method 2022
ANSI/IPC J STD-004, Type ROL0
BELLCORE TR-NWT-000078
ANSI/IPC J SF-818

SODER-WICK SD BOBBINS ARE
DESIGNED TO MEET OR EXCEED:
MIL-STD-2000A
MIL-B-81705C
MIL-STD-1686C
MIL-HDBK-263B
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline
to answer your technical and application
related questions. The toll free number is:
1-800-TECH-401.
NOTE: This information is believed to be accurate. It
is intended for professional end users having the skills to
evaluate and use the data properly.
ITW

CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
Chemtronics, Soder-Wick and CircuitWorks are
registered trademarks of ITW Chemtronics.
All rights
reserved. VacuPak and ControlWipes are trademarks of
ITW Chemtronics. All rights reserved.
MANUFACTURED BY:
ITW Chemtronics
8125 Cobb Center Drive
Kennesaw, GA 30152
1-770-424-4888
DISTRIBUTED BY:
REV. E (02/05)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement