5932

5932
5932
Combination Unit

Model 5932 — Recess-Mounted

M
odel 5932-10 — Semi-Recessed
(recesses 3¼", projects 1¼")

M
odel 5932-11 — Surface-Mounted
(projects 4½")
Models 5932-10 and 5932-11 do not allow clearance for
optional grab bar.See inset view shown at right.
Seat Cover Dispenser and Dual Roll Tissue Dispenser
Product Materials
CABINET: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. Welded construction with burr-free edges.
FLANGE: 22 gauge stainless steel with exposed surfaces in architectural
satin finish. One-piece seamless construction, 1" wide with ¼" return.
DOOR: 18 gauge stainless steel with full-length piano hinge and tumbler
lock keyed like other Bradley units.
PUSH FLAP DOOR: 22 gauge stainless steel with exposed surfaces in
architectural satin finish. Self-closing, with heavy-duty stainless steel piano
hinge.
WASTE RECEPTACLE: leakproof molded plastic. 1.7 gal. capacity.
Capacity
T oilet Seat Cover Dispensers — 1000 standard single-fold or half-fold toilet
seat covers.
Operation
Hinged access door permits servicing of components from one side.
Installation
Verify all rough-in dimensions prior to installation. Requires rough wall
opening 153⁄8"W x 287⁄8"H x 4¼"D. Secure to framing with mounting screws
(included) at holes provided. Recessed unit allows clearance for grab bar (not
included) across front of unit.
Guide Specification
R ecessed combination unit shall include toilet seat cover dispenser and
napkin disposal, and be fabricated of stain­less steel with seamless exposed
surfaces in satin finish. Door and back panel shall be 18 gauge. Door shall
have piano hinge and tumbler lock.
Overall dimensions: 171⁄8"W x 305⁄8"H x 4½"D.
5900 Series Combination Units are to be installed so that
doors open 90° to fill product and maintain waste container.
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the
responsibility of the installer.
Note: ADA requires a 1½" grab bar clearance to the wall. When fully recessed,
this unit protrudes ¼" from the finished wall. A standard grab bar, when
mounted over the unit, will not meet the ADA requirement of 1½".
Page 1 of 2
3/20/2012
This information is subject to change without notice.
Bradley_CombiDispenser_5932_10_11
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
5932
Combination Unit
Dimensions
1¼"
(32mm)
17¹⁄₈"
(435mm)
15¹⁄₈"
(384mm)
2"
(51mm)
¼"
(6mm)
Seat Cover Dispenser
30⁵⁄₈"
(778mm)
28⁵⁄₈"
(727mm)
Dim. "A"
to finished
floor
18"
(457mm)
Removable
Waste
Receptacle
2"
(51mm)
Grab bars must be ordered separately. To learn more about Bradley's
wide variety of grab bar configurations, visit bradleycorp.com.
Dim. "A" Key Surface:
Top of 1½" grab bar to
finished floor
4½"
(114mm)
4¼"
(108mm)
For Dim. "A"
Top of Rough Wall
Opening
Bottom of Rough
Wall Opening
For Seat Cover
Opening Top
For Top of Waste Receptacle
Door @ Dim. "A"
36" (914mm)
47" (1194mm)
18¹⁄₈" (460mm)
45³⁄₈" (1153mm)
33" (838mm)
34½" (876mm)
45½" (1156mm)
16⁵⁄₈" (422mm)
43⁷⁄₈" (1114mm)
31½" (402mm)
33" (838mm)
44" (1118mm)
15¹⁄₈" (384mm)
42³⁄₈" (1076mm)
30" (762mm)
Rough wall opening:
Surface-Mount:
No rough opening, overall dimensions 15¹⁄₈" (384mm) Wide x 18⁵⁄₈" (473mm) High x 4½" (114mm) Deep
Recessed:
15³⁄₈" (391mm) Wide x 28⁷⁄₈" (734mm) High x 4¼" (108mm) Deep
Semi-Recessed:
15³⁄₈" (391mm) Wide x 28⁷⁄₈" (734mm) High x 3¼" (83mm) Deep
Page 2 of 2
3/20/2012
This information is subject to change without notice.
Bradley_CombiDispenser_5932_10_11
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement