EXPANDABLE MANIFOLD SYSTEM FOR MULTIPLE LINES
TPCX017-0811
MATERIAL DISTRIBUTION
SELECTOR PLATES
EXPANDABLE
MANIFOLD
SYSTEM FOR
MULTIPLE LINES
Selector plate with plain
tube connectors
Wall/suspension mount
Conair selector plates are ideally suited for central drying and distribution systems that require conveying multiple materials to multiple destinations.
Wall mount, table top and vertical frame designs can be placed
anywhere between the material sources and destinations. Modular
design provides a variety of configurations for flexibility and expansion.
Table top selector plates
with Quiklok connectors
Selector plate with Quick
connectors
Quick-disconnect style connectors makes changing materials fast
and easy. Simply purge the line to assure it is clean and primed for
the next conveying cycle, then move the connector to the desired
material source line.
CONVEY MULTIPLE SOURCES TO MULTIPLE DESTINATIONS
■
Flexible design
Mounts in a wall or on a floor stand. Modular plates and connectors
allow you to choose the best combination of line sizes, manifolds
and connectors to suit your application.
To material
destinations
■
Easy to use
Simply move your material line hose from one connector to another
to change material destinations.
From
material
sources
■
Durable construction
Rugged construction ensures long life. Material contact points are
stainless steel or aluminum to prevent contamination and provide
minimum maintenance.
■
Accurate
Optional electronic proofing available to assure material is being
conveyed correctly.
Selector plates on a
vertical angled frame with
Quiklok connectors
C-1
MATERIAL DISTRIBUTION
TPCX017-0811
SELECTOR PLATES
S P E C I F I C AT I O N S
TABLE TOP FRAME
with four selector plates
SINGLE SELECTOR PLATE
for Wall/Suspension Mount
ANGLED FRAME
with four selector plates
A
A
(adjustable)
C
A
B
C
B
SELECTOR PLATE MODELS
Performance characteristics
Line size inches {mm}
Dimensions inches {cm}
A - Height of a single plate
B - Depth of a single plate
C - Width of a single plate
Weight lb {kg}
Shipping*
MOUNTING OPTIONS
Number of Selector Plates
Dimensions inches {cm}
A - Height
Single plate
Four plates
Six plates
Eight plates
B - Depth
C - Width
Single plate
Four plates
Six plates
Eight plates
SP 150
SP 175
SP 200
SP 225
SP 250
1.5 {38.1}
1.75 {44.5}
2.0 {50.8}
2.25 {57.2}
2.5 {63.5}
7.0 {17.8} 7.0 {17.8}
1.75 {4.45} 1.75 {4.45}
28.0 {71.1} 28.0 {71.1}
7.0 {17.8}
1.75 {4.45}
28.0 {71.1}
7.0 {17.8} 7.0 {17.8}
1.75 {4.45} 1.75 {4.45}
28.0 {71.1} 28.0 {71.1}
350 {159}
475 {215}
C
B
200 {91}
Wall Mount
1 or more
275 {125}
Table Top
1 to 8
7 {17.8}
32 {81.3}
28 {71.1}
32 {81.3}
42 {106.7}
32 {81.3}
56 {142.2}
32 {81.3}
1.75 {4.45}
31.5 {80.0}
Single Plate 4 plates wide
28 {71.1}
7 {17.8}
28 {71.1}
28 {71.1}
28 {71.1}
42 {106.7}
28 {71.1}
56 {142.2}
VERTICAL FRAME
with four selector plates
600 {272}
Angled Frame Vertical Frame
1 to 8
1 to 8
adjustable 56 to 76 {142 to 193}
adjustable 56 to 76 {142 to 193}
adjustable 56 to 76 {142 to 193}
24 {61.0}
32 {81.3}
6 plates wide
8 plates wide
31.5 {80.0}
31.5 {80.0}
31.5 {80.0}
45.5 {115.6}
31.5 {80.0}
59.5 {151.1}
31.5 {80.0}
A
C
SPECIFICATION NOTES:
* Weights are based on using the maximum number of selector plates and connectors.
These tables define standard configurations only.
Specifications can change without notice. Contact a Conair representative for the most
current information.
CONNECTOR OPTIONS
Male Branch
Connector
Female Drop
Connector
Locking Cap
Plain Tube Connectors
Quick Connectors
Tubes are stainless steel to prevent material contamination. Attach flexible
hose to the tube ends using hose
clamps.
Aluminum connectors and caps lock manually to seal. Flexible hose attaches to the
tube end of the drop connector.
200 West Kensinger Drive ● Cranberry Township, PA 16066 ● 724-584-5500 ● fax 724-584-5299 ● www.conairgroup.com
C-2
B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement