50281 2 ifs vt1001 series ds fin
IFS® Line / Fiber Transmission
VT1001 Series
IFS Dual Independent AM
Video Transmitter
Specifications
Video
Video Input:
Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<5%
<5°
<1%
60 dB typical, 54 dB minimum
Wavelength
OVERVIEW
850 nm, Multimode
STANDARD FEATURES
Receiver Sensitivity
1 μw (-30 dBm)
Surface Mount:
Rack Mount:
Shipping Weight:
7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
< 2 lbs./0.9 kg
The IFS VT1001 Series dual video transmitter provides transmission
• AM Video Transmission
• NTSC, PAL, SECAM Compatible
of two independent
fixed
video
signals
in
one
module
utilizing
AM
Number Of Fibers
2
• Full Color Compatibility
modulation on two independent multimode fiber optic cables. The
Connectors
• Two Independent Receivers in One Module
module is not a multiplexer. The module is ideal for smaller CCTV
Optical:
ST
• Can be Used to Double the Fixed Video Capacity of an R3
installations and the rack-mount version can be used to double the
Power:
Terminal Block with Screw Clamps
fixed video capacity
of
the
R3
rack
for
up
to
28
independent
video
Card Cage
Video:
BNC (Gold Plated Center-Pin)
channels per card cage. The VT1001 is compatible with the IFS
• No In-field Electrical or Optical Adjustments Required
ElectricaL
&
Mechanical
• Power and Sync Detect Status Indicating LED’s to Monitor
VR1000, VR1001, VR1100, and VR2100 Series receivers. PlugPower:
12 VDC @ 150 mA
and-play design ensures ease of installation requiring no electrical
System Performance
Rack:
From Rack
or optical adjustments.
The
module
incorporates
a
power
and
•
Distances
up to 2.5 miles (4 km) without Repeaters
Number of Rack Slots: 1
channel A and
B sync Protection:
detect status indicating LED’s
for monitoring
• Automatic Current
Resettable
Fuses on all Power Lines
Current
Automatic
Resettable Solid-State
Limiters
Circuit
Board:
Meets
IPC
Standard
proper system operation. The module is available in either stand• Hot-Swappable Rack Modules
(in./cm.)
(LxWxH)
alone or rack Size
mount
version.
• Comprehensive Lifetime Warranty
Environmental
APPLICATION
EXAMPLES
MTBF:
Operating
• CCTV (Fixed
Video) Temp:
Storage Temp:
Relative Humidity:
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
SYSTEM DESIGN
System Design
up to 2.5 miles
(4 km)
Video
(Coax)
ifs
er J
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Video
Video
VR1001
VT1001
(Coax)
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125μm MM
Video
(Coax)
(Coax)
interlogix.com
n
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VT1001 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS Dual Independent AM Video Transmitter
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VT1001
Dual Video Transmitter (850 nm)
2
14 dB
2.5 miles (4 km)
VT1001 Series is compatible
with: VR1000, VR1001, VR1100
and VR2100 Series Receivers
Accessories ♦
PS12VDC1.5A-U
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
Specifications
Video
Video Input:
1 volt pk-pk (75 ohms)
Bandwidth:
5 Hz - 10 MHz
Differential Gain:
<5%
Differential Phase:
<5°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
>60 dB typical, 54 dB minimum
Wavelength
850 nm, Multimode
Receiver Sensitivity
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
1 µw (-30 dBm)
Europe
T 44-113-238-1668
F 44-113-253-8121
2
Latin America
T 305-593-4301
F 305-593-4300
Optical:
ST
gesecurity.com/ifs
Power:
Terminal Block with Screw Clamps
Video:
BNC (Gold Plated Center-Pin)
Specifications subject to
change without notice
Number Of Fibers
Connectors
Electrical & Mechanical
Power:
12 VDC @ 150 mA
Rack:
From Rack
Number of Rack Slots
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount:
7.7 x 5.0 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
VT1001 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement