AE RC100 manual

Add to my manuals
30 Pages

advertisement

AE RC100 manual | Manualzz

2

:: Introduction

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10 Worlds Car Kit. Please take a moment to read through this manual to help familiarize yourself with these steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.

Check each bag for these sheets before you start to build.

:: KIT Features

Features in the RC10 Worlds Car Kit:

• Black hard anodized 6061-T6 machined aluminum monocoque chassis

• Stealth 3-gear transmission with ball differential

• V2 slipper assembly with molded gear cover

• 16 precision ball bearings included

• Turbo Mirage body, 5.5” wing, and replica vintage decals

• V2 threaded hard anodized 6061-T6 aluminum coilover shocks with molded bleeder caps

• Independent suspension with durable long front arms and refined geometry

• In-line aluminum front axles and 30 degree caster blocks

• Fiber composite shock towers and battery strap

• Graphite transmission brace

• Updated CVA axle drivetrain

• World’s Car bellcrank steering

• 2.2” one-piece wheels

• Steel turnbuckles

:: Additional

Your new RC10 Worlds Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):

• R/C two channel surface frequency radio system

• Electronic Speed Control (ESC) • R/C Electric Motor

• Steering Servo • Tires with inserts

• 2S, 7.4V Lipo stick battery or 7.2V NiMH battery

• Peak detection battery charger • Thread Lock (AE # 1596)

• #2 Bit Type Phillips Screw Driver • Polycarbonate specific paint

• Pinion gear, size to be determined by type and wind of motor you use

:: Other Helpful Items

Tools included:

• Allen wrenches (AE # 6950)

(.050”, 1/16”, 3/32”, 5/64”)

• Molded tools (AE # 6956)

• Camber gauge (AE # 1719)

• Silicone Shock Fluid (Refer to catalog for complete listings)

• Body Scissors (AE # 1737) • Reamer / Hole Punch

• FT Hex Wrenches (AE # 1655)

• Soldering Iron

• Needle Nose Pliers

• Calipers or a Precision Ruler

• Tire Adhesive (AE # 1597)

• Wire Cutters

• Multi Tool (AE # 7494)

• Hobby Knife

• Green Slime shock lube (AE # 1105)

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

3

:: Hardware - 1:1 Scale View

Cap Head (shcs)

4-40x1/4 (6285)

4-40x5/16” (6932)

(4145, aluminum)

4-40x3/8 (6924) w/hole (6929)

4-40x1/2 (6925) w/hole (6916)

4-40x5/8 (6926)

4-40x3/4 (6927)

4-40x1 (6928)

Flat Head (fhcs)

Flat Head (fhps)

4-40x3/8 (6292)

4-40x1/2 (6922)

8-32x1/4 (6931)

8-32x1/2 (6280)

Button Head (bhcs)

0-80x3/16 (6613)

2-56x1/8 (9645)

4-40x3/16 (6920)

4-40x1/4 (6288)

4-40x3/8 (6917)

3x6mm (31531)

8-32x7/8 (6281)

Bushings / Bearings

Oilite Bushing Set (6630)

1/4 x 3/8 x 1/8 Flanged

5/32” x 5/16” x .125” ball bearing (6589)

3/16” x 3/8” ball bearing (3977)

(PTFE bearing, 6906)

Clips

3/8” x 5/8” ball bearing (3976)

(PTFE bearing, 6903)

Set Screws

4-40x1/8 (6951)

4-40x5/16 (4436)

Nuts (lock/plain)

4-40 Plastic Nut (6472)

E-clip 1/8 (6299)

Diff Balls

5/64 Diff Thrust Balls (6574)

3/32 Carbide Diff Balls (6581)

4-40 Nuts (6295)

4-40 Small Pattern

Plain Nut (7260)

5-40 Diff Locknut (6629)

4-40”/5-40” nylon locknut (6222)

8-32 Steel Locknut (6952)

Notes:

Shims and Washers

.030 Nylon Spacer (4187)

3/16 Axle Shim - Silver (7368)

#4 Washer (6936)

#8 Aluminum Thick

Washer (3323)

Ballstuds

Silver .20 Short (6271)

Silver .30 Long (6273)

4

:: Table of Contents

1................... Cover

2................... Introduction

3................... 1:1 Hardware “Fold Out”

4................... Table of Contents

5....................Nose Plate / Steering Build

A-AA)

6 - 7............. Front Suspension Build

B)

7 - 9.............Transmission Build

C-CC)

9 - 10...........Rear Bulkhead Build

D-DD)

10 - 11.........Rear Suspension Build

E-EE)

11 - 12........ Turnbuckles Build

F)

12 - 14........ Shocks Build

G-GG)

14 ................Chassis Build

H-HH)

15 - 16........ Electronics Build

I)

16 - 17........ Wheels, Tires and Body Install

J)

18 - 19........ Tuning Tips

20 - 28....... Catalog

29................ Setup Sheet “Blank”

30................ Back Cover

:: Notes

!

This symbol indicates a special note or instruction in the manual.

This symbol indicates a Racers Tip.

There is a 1:1 hardware foldout page in the front of the manual. To check the size of a part, line up your hardare with the correct drawing until you find the exact size. Each part in the foldout has a number assigned to it for ordering replacement parts.

Associated Electrics, Inc.

26021 Commercentre Dr.

Lake Forest, CA 92630

Customer Service

Tel: 949.544.7500

Fax: 949.544.7501

http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook

1/14

:: Nose Plate / Steering Build - Bag A-AA - Step 1

6331

RC10 Body

Mounts

(white)

3323 x2

#8 Aluminum

Washer (thick)

6309

RC10WC

Front Nose

Plate,

(black)

6280

8-32 x 1/2

Aluminum

FHPS

6931

8-32 x 1/4

FHPS

#1596 thread lock

!

6280 x2

8-32 x 1/2

Aluminum

FHPS

6302

RC10WC

Chassis,

(black)

You can use 2 or 3

#3323 #8 washers based on body height preference.

6254

RC10WC

Bellcranks

:: Nose Plate / Steering Build - Bag A-AA - Step 2

6254 x2

Bellcrank

Bushing

Nut

6630 x4

Flanged Oilite

Bushing,

(.25 x .375 x .125)

5

6271

Ballstud x5

6254

Bellcrank

Shim x2

:: Nose Plate / Steering Build - Bag A-AA - Step 3

6936

#4 aluminum washer x2

#1596 thread lock

7260

4-40 Plain

Nut x2

6295

4-40 Nut x2

6927

4-40 x 3/4

SHCS x2

6271

Ballstud x2

.20 (silver)

6208 x2

RC10 Front

Arm Mounts

(Left & Right)

6232

RC10WC

Front Shock

Tower

6925

4-40 x 1/2

SHCS x2

6280 x6

8-32 x 1/2

Aluminum

FHPS

Racer’s Tip:

Hold the chassis and bulkhead assemblies upside down during install to ensure the #6254 bellcrank shims are correctly seated.

Tighten down the bushing and then loosen until bellcrank turns freely.

6

:: Front Suspension Build - Bag B - Step 1

7260

4-40

Plain

Nut

LEFT

6273

Ballstud

.30 (silver)

6936 x2

#4 Washer,

Aluminum

6225

RC10WC

Inline

Steering

Blocks

Build left and right sides!

6210

RC10 front caster blocks,

30 degrees

(Left & Right)

7260

4-40

Plain

Nut

:: Front Suspension Build - Bag B - Step 2

6299

E-clip

(small) x2

6951

4-40 x 1/8

Set Screw

6273

Ballstud

.30 (silver)

LEFT

7222

Wide Front

Axle

!

Press stub axles into steering blocks.

Use a hard surface to push down on!

Build left and right sides!

6206

RC10WC

Front Arms,

(black)

(Left & Right)

6299

E-clip

(small) x2

6223

RC10

King Pins

:: Front Suspension Build - Bag B - Step 3

6227

RC10 Front

Outer

Hinge Pins

Build left and right sides!

6226

RC10 Front

Inner Hinge

Pins

6299

E-clip

(small) x2

Build left and right sides!

7

:: Front Suspension Build - Bag B - Step 4

6279

White Ball

Cups x2

6260

Turnbuckle,

1.00”

!

Orient the notch to the left throughout the car. It indicates which end has the left hand threads!

Steering Rack Turnbuckle

0.45” (11.5mm)

:: Transmission Build - Bag C-CC - Step 1

#6591 diff lube

6581

3/32 carbide diff balls x12

!

The diff gear has four molded dimples on one side. The diff balls should be installed on the opposite side of the dimples.

#6591 diff lube

6580

Diff Gear

:: Transmission Build - Bag C-CC - Step 2

6573

Diff thrust washer x2

#6588 black grease

6574 x6

5/64 diff thrust balls

6573

Diff thrust bolt

6579

Diff Drive

Ring

#6591 diff lube

6577

Diff

Outdrive

(Right)

6579

Diff Drive

Ring

6578

Diff

Outdrive

(Left)

6589

Bearing, x2

5/32 x 5/16

8

:: Transmission Build - Bag C-CC - Step 3

6575

Locking t-nut

6582

Diff thrust spring

!

Compress spring first.

As you tighten the diff bolt, you will notice the

T-nut ears moving closer to the bottom of the outdrive slot. This compresses the spring behind the T-nut. The spring should be completely compressed at the same time the

T-nut reaches the end of the slot.

Caution! Pay close attention to the feeling when the spring is completely compressed.

Do not overtighten the bolt. When you feel the spring completely compressed, loosen the diff bolt 1/4” of a turn. Your diff should now operate smoothly with resistance as the outdrives move in opposite directions. After you have driven the car once, re-check the diff setting.

6575

Diff cover

:: Transmission Build - Bag C-CC - Step 4

3977 x2

Bearing,

3/16 x 3/8”

3977 x2

Bearing,

3/16 x 3/8”

6569

RC10WC

Idler Gear

9361

Idler Gear

Shaft

3976

Bearing, x2

3/8 x 5/8”

6564

RC10WC

Transmission

Case

(L & R sides)

:: Transmission Build - Bag C-CC - Step 5

6603

RC10

Motor Plate, black

6928

4-40 x 1”

SHCS x4

#1596 thread lock

!

Note: The head of the diff bolt should be on the same side as the spur gear!

9

7485

V2 Slipper

Hubs x2

9739

Slipper

Spring

9603

Slipper

Pads x2

6629

5-40 Diff

Locknut

7486

Slipper Spring

Washer

9651

81T 48P

Spur Gear

:: Rear Bulkhead Build - Bag D-DD - Step 1

6295

4-40 Nuts x2

6924

4-40 x 3/8

SHCS x2

6936

#4 Aluminum

Washer x2

#1596 thread lock

6377

RC10WC

Rear Shock

Tower

6927

4-40 x 3/4

SHCS x2

6932

4-40 x 5/16

SHCS x2

6323

RC10 Rear

Bulkhead

:: Rear Bulkhead Build - Bag D-DD - Step 2

6926

4-40 x 5/8

SHCS x2

1mm

!

There should be

1mm of thread exposed for stock slipper setup.

6271

Ballstud x2

.20 (silver)

!

Cut the bulkhead for a more authentic look to the original

Worlds car.

6280

8-32 x 1/2

FHPS x2

6292

4-40 x 3/8”

FHCS x4

10

:: Rear Bulkhead Build - Bag D-DD - Step 3

!

Note: The transmission brace does not have a counter sink for the

#6280 screw.

6331

RC10 Body

Mounts

(white)

6932

4-40 x 5/16”

SHCS x4

6327

RC10

Wing

Tubes x2

!

Press wing tubes into bulkhead!

6280

8-32 x 1/2

FHPS

6593

RC10WC

Transmission

Brace

6285

4-40 x 1/4

SHCS x2

#1596 thread lock

Racer’s Tip:

Use a small amount of CA glue on wing tube ends before inserting into bulkhead.

:: Rear Suspension Build - Bag E - Step 1

6360

RC10 Rear

Arm Mounts

6380

RC10 Rear

Inner

Hinge Pins

6355B

RC10WC

Rear Arms,

(black)

Build left and right sides!

6299

E-clip

(small) x2

:: Rear Suspension Build - Bag E - Step 2

9760

CVA

Bone

!

Note:

Remove pin retainer to prevent binding if using

4-40 set screw in CVA.

9755

CVA

Axle

#6588 black grease

!

7381

CVD

Pin

!

Forward holes

6280 x2

8-32 x 1/2

FHPS

Build left and right sides!

#1597 ca glue

1 drop!

CA glue not included

!

Align the gap in the pin retainer to be opposite of the CVA pin.

Build x2

7381

CVD

Coupler

7996

CVA Pin

Retainer

Racer’s Tip:

Use a small amount of CA glue on CVA Pin Retainer ends to hold retainer in place.

11

:: Rear Suspension Build - Bag E - Step 3

7364

RC10WC 0°

Rear Hub

7368 x3

Rear Axle

(Universal)

Shims,

3/16 X .010”

9608

Rear Axle

Wheel Spacer, blue aluminum

3977 x2

Bearing,

3/16” X 3/8”

7665

Drive Shaft

Roll Pin

7377

Rear Axle Bearing

Spacer, aluminum

:: Rear Suspension Build - Bag E - Step 4

6273

Ballstud

.30 (silver)

7260

4-40

Plain Nut

Build left and right sides!

6381

RC10 Rear

Outer

Hinge

Pins

:: Turnbuckles Build - Bag F - Step 1

6299

E-clip

(small) x2

6264

Turnbuckle,

1.375”

Rear Camber Turnbuckle

0.98” (25mm)

6279

Ball cups

(white) x2

!

Orient the notch to the left throughout the car. It indicates which end has the left hand threads!

Build left and right sides!

Build left and right sides!

12

:: Turnbuckles Build - Bag F - Step 2

6262

Turnbuckle,

1.65”

Front Camber Turnbuckle

0.86” (22mm)

Build left and right sides!

:: Turnbuckles Build - Bag F - Step 3

6279

Ball cups

(white) x2

!

Orient the notch to the left throughout the car. It indicates which end has the left hand threads!

6263

Turnbuckle,

2.06”

Steering Turnbuckle

1.45” (37mm)

Build left and right sides!

:: Shocks Build - Bag G-GG - Step 1

Remove spurs

6465

Shock pistons

(1, 2, 3)

Piston

6460

Shock shaft, front (0.71)

Piston number here

Use #1 = front shocks

Use #1 = rear shocks

6459

Shock shaft, rear (1.02)

Racer’s Tip:

Use a marker to mark the piston numbers for easy identification!

6279

Ball cups

(white) x2

!

Orient the notch to the left throughout the car. It indicates which end has the left hand threads!

6299

E-clip

(small)

6299

E-clip

(small)

13

:: Shocks Build - Bag G-GG - Step 2

4187

Nylon

Spacers

Front: 0

Rear: 3

6469

Shock cap o-ring

5407

Red

O-ring x2

7484

Shock

Bottom

Cap

7475

V2 .89

Threaded

Body (front)

7481

V2 1.32

Threaded

Body (rear)

7484

Shock

Internal

Spacer

5407

Red O-ring

(use for rear shocks only)

6468

Shock

Pivot Ball

6471

Shock

Rod End

Build x2 front and x2 rear shocks

:: Shocks Build - Bag G-GG - Step 3

Step 2-3

35wt

Shock fluid

35wt #5429

Step 4-5 Step 6-7

6428

Shock cap

(molded)

* Shock Bleeding Steps:

Step 8

1. Before assembly, get each bleed

screw and thread it 1-2 turns into

the shock cap. This will make

installation easier when you are

bleeding your shocks.

2. Pull shock shaft down.

3. Fill shock body 3/4 full with silicone fluid.

4. Slowly move the shock shaft up and

down to remove air from under piston.

5. Wait for bubbles to come to surface

6. Fill shock body to top with silicone fluid

7. Place a drop of oil in the cap and on cap

thread

8. Install cap (without bleed screw) and

tighten completely

9. Slowly compress shaft all the way to

bleed excess silicone fluid out the hole

in the cap (use rag around shock to

catch excess fluid)

10. Install 2-56 button head screw until

snug while shaft is fully compressed

(recommend using a high quality .050”

wrench such as Factory Team #1542)

:: Shocks Build - Bag G-GG - Step 4

9645

2-56 x 1/8”

BHCS

Slow

Step 9-10

9724

Offset

Shock Cups

(front)

Front:

5mm

Rear:

1mm

Racer’s Tip:

Use your finger to rub shock oil on the o-ring for smoother adjustment!

3959

Shock Collar

O-Ring

7416

Threaded

Shock Collar

6496

Front shock spring, silver

(3.85lb)

6478

Rear shock spring, silver

(2.10lb)

6475

Shock Cups

(rear)

Build x2 front and x2 rear shocks

14

:: Shocks Build - Bag G-GG - Step 5

6473

Shock

Bushing

6472

Plastic Nut

6927

4-40 X 3/4”

SHCS

:: Shocks Build - Bag G-GG - Step 6

6473

Shock

Bushing

6472

Plastic Nut

!

Note: Use the two washers

(#6936) when running the long wheelbase.

Remove both washers when running the short wheelbase.

6927

4-40 X 3/4”

SHCS

:: Chassis Build - Bag H-HH - Step 1

1

6288

4-40 x 1/4

BHCS

#1596 thread lock

6321

RC10WC Nose

Brace Tubes,

(black)

6936 x2

#4 Washer, aluminum

2

6917

4-40 x 3/8

BHCS

Build left and right sides!

6337

RC10

Antenna

Mount

4187

Nylon

Spacer

Install two front shocks!

Install two rear shocks!

6338

Antenna tube and cap,

(black)

6922

4-40 x 1/2”

FHCS

15

:: Electronics Build - Bag I - Step 1

6333

RC10

Battery Cup and Strap

6292

4-40 x 3/8”

FHCS x2

:: Electronics Build - Bag I - Step 2

6337

RC10

Servo

Mounts x2

6936

#4 Aluminum

Washer x4

Servo not included!

6924

4-40 x 3/8”

SHCS x4 89007

Servo Horn

Ring

:: Electronics Build - Bag I - Step 3

Receiver not included!

ESC not included!

6271

Ballstud

.20 (silver)

Servo horn screw not included!

Motor not included!

6279

Ball cups

(white) x2

6262

Turnbuckle,

1.65”

Servo Turnbuckle

0.94” (24mm)

6922

4-40 x 1/2”

FHCS x2

6727

Servo tape

!

See page 18 to set gear mesh properly!

Pinion not included!

31531

3 x 6mm x2

BHCS

16

:: Electronics Build - Bag I - Step 4

6566

RC10WC

Gear Cover and Plug

6925

4-40 x 1/2”

SHCS x2

Battery not included!

6285

4-40 x 1/4”

SHCS x2

:: Electronics Build - Bag I - Step 5

!

Note: You can sand the end of the battery strap to better fit between the battery pack and the rear bulkhead.

Rear of Battery Strap

6339

RC10WC

Battery

Strap

:: Wheels / Tires and Body - Bag J - Step 1

#1597 ca glue

Tires and

Inserts not included!

Build 2

9688

Front Wheel

2.2”, yellow

#1597 ca glue

Tires and

Inserts not included!

!

Once the tire is mounted to the wheel, carefully apply ca glue to the tire bead. Do one side at a time. Allow it to dry before gluing the other side!

Build 2

6805Y

Rear Wheel

3/16”, yellow

17

:: Wheels / Tires and Body - Bag J - Step 2

3977 x2

Bearing,

3/16” X 3/8”

Build left and right sides!

:: Wheels / Tires and Body - Bag J - Step 3

Painting Tips:

Body and Wing:

Your RC10 Worlds Kit comes with a clear polycarbonate body and wing. You will need to prep the body and wing before you can paint them. Wash the inside thoroughly with warm water and liquid detergent. Dry the body and wing using a clean, soft, lint-free cloth. Install the window masks on the inside of the body. (RC cars get painted from the inside). Using high quality masking tape, apply tape to the inside of the body to create a design. Spray

(either rattle can or airbrush R/C specific paint) the paint to the inside of the body (prefferably dark colors first, lighter colors last).

NOTE: use ONLY paint that is recommended for use with

(polycarbonate) plastics. If you do not, you can destroy the plastic body and wing!!!!).

After painting, cut the body and wing along the trim lines.

Make sure to drill or use a body reamer to make the holes for the body mounts, wing mounts, and antenna!

6222

4-40/5-40

Nylon Locknut, black

:: Wheels / Tires and Body - Bag J - Step 4

6182

Wing, clear

6189

Wing x2 mounts

4436 x2

4-40 x 5/16”

Set Screw

6189

Wing mount wire

6952

8-32 Steel

Locknut

Build left and right sides!

6332

Body clip x2

!

TIP: Bending the wire as shown can help ensure the wing buttons are parallel.

!

TIP: Bend wire to create tight fit inside wing tubes.

18

:: Tuning Tips

Tips for Beginners:

Before making any changes to the standard setup, make sure you can get around the track without crashing.

Changes to your vehicle will not be beneficial if you can’t stay on the track. Your goal is consistent laps. Once you can get around the track consistently, start tuning your vehicle. Make only ONE adjustment at a time, testing it before making another change. If the result of your adjustment is a faster lap, mark the change on the included setup sheet (make adddtional copies of the sheet before writing on it). If your adjustment results in a slower lap, revert back to the previous setup and try another change. When you are satisfied with your vehicle, fill in the setup sheet thoroughly and file it away.

Use this as a guide for future track days or conditions.

Peridicaly check all moving suspension parts. Suspension components must be kept clean and move freely without binding to prevent poor and/or inconsistent handling.

Motor Gearing:

Proper motor gearing will result in maximum performance and run time while reducing the chance of overheating and premature motor failure. The gear ratio chart lists recommended starting gear ratios for the most widely used motor types. Gear ratios will vary depending upon motor brand, wind, and electronic speed control. Consult your motor and electronic speed control manufacturers for more information. Team Associated is not responsible for motor damage due to improper gearing. * These gearings are for use with advanced timing speed control settings!

RC10WC Gear Ratio Chart (Internal Gear Ratio 2.25:1)

Motor Pinion Spur FDR

27T Stock Brushed

19T Super Stock Brushed

17.5 Reedy Sonic Brushless *

17.5 Reedy Sonic Brushless

13.5 Reedy Sonic Brushless *

13.5 Reedy Sonic Brushless

10.5 Reedy Sonic Brushless

9.5 Reedy Sonic Brushless

8.5 Reedy Sonic Brushless

20

19

21

30

19

28

21

20

19

81

81

81

81

81

81

81

81

81

9.11:1

9.59:1

8.68:1

6.08:1

9.59:1

6.51:1

8.68:1

9.11:1

9.59:1

Due to the original design of the RC10, motors exceeding the power of a 8.5T motor are NOT recommended, to prevent damage to the drivetrain!

Set The Gear Mesh:

You should be able to rock the spur gear back and forth in the teeth of the pinion gear without making the pinion gear move. If the spur gear mesh is tight, then loosen the #31531 screws and move the motor away, then try again.

A gear mesh that is too tight or too loose will reduce power and damage the gear teeth.

Slipper Clutch:

The assembly instructions give you a base setting for your clutch.

Turn the nut on the shaft so that the end of the top shaft is even with the outside of the nut. Tighten the nut until the shaft extends thru the nut by

0.5mm. At the track, tighten or loosen the nut in 1/8 turn increments, until you hear a faint slipping sound for 1-2 feet on takeoffs.

Another popular way to set the clutch is to hold both rear tires firmly in place and apply short bursts of throttle. If the clutch is properly set, the front tires should lift slightly up off the surface.

Wheelbase Adjustment:

The wheel base on the RC10WC can be adjusted by moving the rear arm mounts forward or backwards.

The kit setting has the arm mount back which provides the most stability over bumps and rhythm sections.

Going to the shorter wheelbase option will improve rear traction.

19

:: Tuning Tips (cont.)

Front Camber Links:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the tower.

Shortening the camber link will give the front end less roll and quicken steering response. Lengthening the camber link

(or raising the ball end) will give the front more roll and slower steering response.

Front Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the front. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Use the included #1719 camber gauge to set your camber. Positive camber, where the top of the tire is leaning out, is not recommended.

Caster:

!

*Checking camber with camber gauge

Caster describes the angle of the kingpin as it leans toward the rear of the vehicle. Positive caster means the kingpin leans rearward at the top. The supplied 30° caster blocks (#6210) are recommended in most cases. For less corner entry steering and more exit steering, try the optional 15° caster blocks (#6213).

Rear Camber Link:

Changing the length of the camber link is considered a bigger step than adjusting the ball end height on the rear chassis brace. Shortening the camber link (or lowering the ball end) will give the rear end less roll and the car will tend to accelerate or “square up” better. Lengthening the camber link (or raising the ball end) will give the rear more roll and more cornering grip. In order to run some of the very short link locations, a shorter turnbuckle will be required.

!

*Raise or lower the ball end by adjusting the ballstud location on the bulkhead

Rear Camber:

Camber describes the angle at which the tire and wheel rides when looked at from the back. Negative camber means that the tire leans inward at the top. A good starting camber setting is -1°. Use the included #1719 camber gauge to set your camber. Adding a small amount of positive camber, where the top of the tire is leaning out, will tend to improve straight-line acceleration on loose tracks.

Ride Height:

Ride height is the distance from the ground to the bottom of the chassis. The standard front ride height setting is with the front arms just below level or 24mm (Ride Height Gauge #1449). Check the ride height by lifting up the entire car about 8-12 inches off the bench and drop it. After the suspension “settles” into place, measure ride height (Ride Height Gauge #1449). Raise or lower the shock collars as necessary so that the left & right arms appear to be level.

!

*Front arms should be just below level ride height

The rear ride height setting you should use most often is with the outdrive, driveshaft, and axles all on the same imaginary horizontal line (reffered to as “bones level”) or 24mm (Ride Height Gauge

#1449). Check the ride height by lifting up the entire car about 8-12 inches off the bench and drop it. After the suspension “settles” into place, measure ride height (Ride Height Gauge #1449). Raise or lower the shock collars as necessary so that the left & right driveshafts appear to be level.

Motor Maintenance:

!

!

*Dog bones should be in a straight line when ride height is set at “Bones level”

*TIP: Set the rear dog bones level and then adjusting the front to make the chassis parallel to the ground.

Brushed motors require frequent maintenance to keep performance levels at their maximum. Between runs and after letting the motor cool completely, inspect the brushes to ensure that they are moving freely in their holders. Remove the springs and slide the brushes in and out of their holders checking for any resistance or rough spots. If found, remove the brush and carefully wipe it clean. Removing buildup will allow the brush to slide freely and create maximum contact with the commutator resulting in maximum power output. After every 3-5 runs, remove the brushes from their holders and inspect the tips for wear or burning. If there is noticeable wear (less than 75% of the brush remaining), it is best to cut the commutator and replace the brushes with a new pair. If the tips become a burned blue color, the lubricant in the brush has been burned away and new brushes should be installed. Occasionally, the motor should be cleaned with a soft brush to prevent dirt build up around the brush hood area and ball bearings.

At this time, it is a good idea to add one drop of bushing / bearing oil to each bushing or ball bearing.

If using a brushless motor, please refer to the motor manufacturer’s guidelines for proper maintenance.

20

:: Shocks

3959

4187

5407

6299

6428

6459

6460

6465

6468

6469

6471

6475

7416

7475

7481

7484

9645

9724

Threaded Shock Collar O-Ring

Nylon Spacer, 1/32” (.030)

Red O-Rings

1/8” E-Clips

Shock End Cap, molded composite

Shock Shaft, 1.02” stroke

Shock Shaft, .71” stroke

Shock Piston, (1, 2, 3)

RC10 Shock Rod Ends / Pivots

Black O-Ring

Rod End, .230 ball, for 2 shocks

Shock Cups (4)

FT Off Road Threaded Shock Collar with O-Rings, black

FT V2 .89 Threaded Bodies

FT V2 1.32 Threaded Bodies

FT V2 1:10 Shock Rebuild

2-56 x 1/8” BHCS

Offset Spring Cup

4

12

8

12

1

1

1

4ea.

2

4

2

1

2

2

2

4

6

2

6428

9645

6469

Front: 7475

Rear: 7481

6299

6465

6299

Front: 6460

Rear: 6459

3959

7416

Front: 9724

Rear: 6475

5407

7484

5407

7484

6493

6494

6496

6497

8232

6478

6480

6481

6482

7434

7435

7436

:: Springs

1581

1582

Factory Team Buggy Front Spring Kit. I pr of green, silver, blue, black springs

Factory Team Truck/Buggy Rear Spring Kit.

I pr of green, silver, blue, gold, red springs

Front Buggy Spring Brown 2.80 lb

Front Buggy Spring Green 3.50 lb

Front Buggy Spring Silver 3.85 lb (Kit)

Front Buggy Spring Blue 4.20 lb

Front Buggy Spring Black 3.20 lb

1

1

Pr.

Pr.

Pr.

Pr.

Pr.

Rear Spring Silver 2.10 lb (Kit)

Rear Spring Green 1.90 lb

Rear Spring Black 1.74 lb

Rear Spring Gray 2.33 lb

Rear Spring Blue 2.55 lb

Rear Spring Gold 2.75 lb

Rear Spring Red 2.95 lb

Pr.

Pr.

Pr.

Pr.

Pr.

Pr.

Pr.

:: Slipper / Gear Cover

6285

6566

6629

7485

7486

9603

9648

9649

9650

9651

9652

9653

9739

31531

4-40 x 1/4 SHCS

RC10WC Gear Cover

5-40 Diff Locknut

FT V2 Slipper Hubs

FT V2 Slipper Spring and Washer

Slipper Pad

69T 48P Spur Gear

72T 48P Spur Gea

75T 48P Spur Gear

81T 48P Spur Gear (Kit)

78T 48P Spur Gear

84T 48P Spur Gear

Slipper Spring

M3 x 6 BHCS

1

6

1

1

1

1

1

12

1

6

2

1

2

1

7485

9603

4187

5407

:: Shock Fluid

5420 10 Weight Silicone Shock Fluid

5431

5432

5433

5434

5435

5436

5437

5438

5421

5422

5423

5424

5425

5426

5427

5428

5429

5430

20 Weight Silicone Shock Fluid

30 Weight Silicone Shock Fluid

40 Weight Silicone Shock Fluid

22.5 Weight Silicone Shock Fluid

80 Weight Silicone Shock Fluid

27.5 Weight Silicone Shock Fluid

15 Weight Silicone Shock Fluid

25 Weight Silicone Shock Fluid

35 Weight Silicone Shock Fluid

45 Weight Silicone Shock Fluid

55 Weight Silicone Shock Fluid

32.5 Weight Silicone Shock Fluid

37.5 Weight Silicone Shock Fluid

42.5 Weight Silicone Shock Fluid

50 Weight Silicone Shock Fluid

60 Weight Silicone Shock Fluid

70 Weight Silicone Shock Fluid

47.5 Weight Silicone Shock Fluid

9603

9651

9739

31531

*Motor screws

6471

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

2oz.

6468

7485

7486

6629

6566

6566

6285

:: Turnbuckles / Servo

6260

6262

6263

6264

6271

6279

6337

6922

6924

6936

9180

89007

Turnbuckle, 1.00”

Turnbuckle, 1.65”

Turnbuckle, 2.06”

Turnbuckle, 1.375”

Short Ballstud, stainless steel, short

White Ball Cups

RC10 Servo/Antenna Mount

4-40 x 1/2” FHCS

4-40 x 3/8” SHCS

#4 Washer, Aluminum

Servo Horns, Molded

Steering Servo Horn Ring

6279

6260

6262

6263

6264

6279

:: Steering

6254

6271

6280

6630

RC10WC Bellcrank Set

Short Ballstud, stainless steel, short

8-32 x 1/2” Aluminum FHPS

RC10 Oilite Bushing Set

1

12

16

1

12

14

1

6

6

10

1

1

2

2

2

2

6337

6936

6337

6922

6936

6922

6924

6271

6924

89007

9180

*Not included

6254

6630

6271

6254

6630

6254

6280

6271

6271

6254

6630

6254

6630

6254

6280

:: Antenna Mount / Battery Strap

4187

6292

6333

6337

6338

6339

6925

Nylon Spacer, 1/32” (.030)

4-40 x 3/8” FHCS

RC10 Battery Cup

RC10 Servo/Antenna Mounts

Antenna Tube with Cap, black

RC10WC Battery Strap

4-40 X 1/2” SHCS

12

6

1

1

1

1

6

6338

6925

6925

6338

6339

21

6333

6337

4187

6292

6292

6292

22

:: Front Arm

3977

6206

6208

6210

6222

6223

6225

6226

6227

6273

6280

6299

6927

6936

6951

7222

7260

Bearing, 3/16” X 3/8”

Front Suspension Arm, wide, black

RC10 Front Arm Mounts

RC10 Front Caster Blocks, 30 deg

4-40/5-40 Nylon Locknut, black

RC10 King Pin w/Clips

RC10WC Inline Steering Block

RC10 Front Inner Hinge Pin

Hinge Pin, outer, 1.020”, w/ clips

Long Ballstud, .17 Ball Stud

8-32 x 1/2” Aluminum FHPS

E-Clip, 1/8”

4-40 X 3/4” SHCS

#4 Washer, aluminum

4-40 X 1/8” Socket Set Screws

Wide Front Axle

4-40 Small Pattern Plain Nut

2

1ea.

1ea.

1ea.

8

2

1ea.

2

1

2

16

12

6

10

6

2

12

7260

6210

6299

6208

6223

6299

6273

7260

6225

6936

6951

7222

6280

3977

6222

6226

6299

6927

6227

6299

6299

6206

6299

:: Rear Arm

3977

6273

6280

6299

6355B

6360

6371

6380

6381

6927

6936

6952

7260

7364

7368

7377

7381

7665

7996

9608

9755

9760

Bearing, 3/16” X 3/8”

Long Ballstud, .30 Ball Stud

8-32 x 1/2” Aluminum FHPS

E-Clip, 1/8”

RC10WC Rear Arms, black

RC10 Rear Arm Mounts

RC10 CVA Set, 3/16” axle

RC10 Rear Inner Hinge Pins

Hinge Pin, Rear, Outer

4-40 x 3/4” SHCS

#4 Washer, aluminum

8-32 Locknut, Steel

4-40 Small Pattern Plain Nut

RC10WC 0 degree Rear Hubs

Rear Axle Shims, 3/16 X .010”

Rear Axle Bearing Spacer, aluminum

MIP CVD/Uni-Drive Rebuild Kit

Drive Shaft Roll Pin

FT Pin Retainer

Rear Wheel Spacer, blue aluminum

CVA Axle, rear

Center Bone, rear

2

2

2

1

2

6

10

6

12

1ea.

14

2

1

6

2

2

16

12

1ea.

1ea.

2

2

9760

7381

6360

7381

9755

7368

7996

6371

3977

6273

7377

7260

7364

3977

7665

6280

6299

6280

6299

9608

6952

6380

6936

6927

6299

6381

6355B

6299

23

:: Front Shock Tower

6232

6271

6295

6472

6473

6925

6927

6936

7260

RC10WC Front Shock Tower

Short Ballstud, Stainless Steel, .20

4-40 Nuts

Plastic Nut

Shock Bushing

4-40 x 1/2” SHCS

4-40 x 3/4” SHCS

#4 Washer, Aluminum

4-40 Small Pattern Plain Nut

1

12

6ea.

4

4

6

6

10

12

6472

6473

6295

6936

6472

6927

6473

6295

6936

7260

6271

6925

6232

7260

6927

6271

6925

:: Rear Shock Tower

6295

6377

6472

6473

6924

6927

6932

6936

4-40 Nuts

RC10WC Rear Shock Tower

Plastic Nut

Shock Bushing

4-40 x 3/8” SHCS

4-40 x 3/4” SHCS

4-40 x 5/16” SHCS

#4 Washer, Aluminum

6ea.

1

4

4

6

6

6

10

6936

6295

6473

6472

6927

6377

6927

6932

6924

6932

6936

6472

6473

6295

:: Wheels / Tires

6805W

6805Y

9588

9688

RC10 2.2” Rear Wheel, White

RC10 2.2” Rear Wheel, Yellow

Front Wheel, 2.2”, White

Front Wheel, 2.2”, Yellow

2

2

2

2

*Not included

*Not included

9588

6805W

24

:: Rear Bulkhead

4436 Set Screw, 4-40 x 5/16”

6189

6271

6280

6323

6327

6331

6332

6593

6932

RC10WC Wing Mounts (White) and wire

Short Ballstud, Stainless Steel, .20

8-32 x 1/2” Aluminum FHPS

RC10 Rear Bulkhead

RC10 Wing Tubes

RC10 Body Mounts (White)

Body Clips

RC10WC Transmission Brace

4-40 x 5 16” SHCS

4

2

12

16

1

2

1

6

2

6

4436

6189

6189

6189

4436

6271

6327

6327

6280

6331

6323

6280

6271

6932

6332

6932

6593

6280

:: Transmission / Ball Diff

6577

6578

6579

6580

6581

6582

6589

6603

6928

9361

9601

3976

3977

6285

6292

6564

6569

6573

6574

6575

Bearing, 3/8” X 5/8”

Bearing, 3/16” X 3/8”

4-40 x 1/4 SHCS

4-40 X 3/8” FHCS

RC10WC Transmission Case, L & R

RC10WC Idler Gear

Diff Thrust Screw and Washers (2)

Precision Diff Thrust Ball, 5/64”

Diff Thrust Bolt Parts

Diff Outdrive Hub (R)

Diff Outdrive Hub (L)

Associated Diff Drive Ring

Diff Gear (45 tooth) for 2.25 trans.

Carbide Diff Ball, large, 3/32”

Diff Thrust Spring

Bearing, 5/32 x 5/16, unflanged

RC10 Motor Plate, (Black)

4-40 x 1” SHCS

Idler Gear Shaft

Top Shaft

6575

6573

6573

6577

6574

6

1

1

1

2

1

1

1

2

1

14

1

1

1

6

1

2

2

12

6

6589

6579

6581

6285

6603

3977

9361

6564

9601

3977

6564

6928

6292

6292

3977

3976

6569

3976

6292

6292

6928

6928

6928

6580

6579

6578

6582

6575

3323

6280

6288

6302

6309

6321

6331

6332

6917

6926

6931

:: Chassis

#8 Aluminum Thick Washer

8-32 x 1/2” Aluminum FHPS

4-40 X 1/4” BHCS

RC10WC Chassis, Black

RC10WC Front Nose Plate, Black

RC10WC Nose Brace Tubes, Black

RC10 Body Mounts (White)

Body Clips

4-40 X 3/8” BHCS

4-40 X 5/8” SHCS

8-32 x 1/4” Aluminum FHPS

6

6

6

6

1

2

2

12

12

6

1

6

6

6

6

6926

6917

6331

6332

6288

3323

6321

6917

6309

6321

6931

6280

6288

6302

6926

:: Lubes & Adhesives / Decals / Misc.

1105

1596

1597

6588

6591

6636

6727

716

3816

3820

3834

9787

FT Green Slime Shock Lube

FT Locking Adhesive

FT Tire Adhesive, medium

Black Grease - 4cc

S.Diff Lube - 4cc

Silicone Grease - 4cc

Servo Tape

Reedy 2009 Sticker Set

American Bumper Sticker

AE Logo Decal Sheet

AE Blue Embossed Logo Sticker

FT Chassis Protective Sheet

1

2

1

1

1

1

1

1

1

1

1

2

:: Body, Wing, and Decals

6121

6160

6162

6180

6181

6182

6183

6186

6187

6189

6190

6191

6192

6193

6193B

6866

6867

Viper Buggy Body, clear

Protech Buggy Body, clear

Turbo Mirage Buggy Body, clear - Kit

RC10 Driver Figure, clear

High Downforce Wing Kit, w/wire and buttons

High Downforce Wing, 5 1/2”

High Downforce Wing, 7”

Large Wing

RC10 Wing Kit

RC10WC Wing Mount Kit, (tear drop mounts, black)

Wing Mounts, (tear drop mounts, black)

Wing Mount Kit, (diamond mounts, white)

RC10 Accessories (Wheel Knock Offs, Headlights)

Wing Mounts, Aluminum

FT Wing Mounts, Aluminum (blue)

RC10 Classic Decal Sheet

RC10 Worlds Car Decal Sheet

1

1

1

1

2

1

1

1

1

1

1

2

1

1

1

1

2

:: XP Electronics

29145

29146

29166

29167

29168

29209

29210

29211

29212

29214

29107

29133

29134

29138

29139

29140

29141

29142

29143

29144

29215

29216

29250

29251

29252

29253

29254

XP DS1903/S1903 Metal Gear Set

XP DS1903 Digital Servo

XP DS1903MG Digital Servo

XP SC500-BL Brushless ESC

XP SC900-BL Brushless ESC

XP SC200 Brushed ESC

XP SC450 Brushless ESC

XP ESC Fan Option

XP SC700-BL Brushless ESC

XP SC1200-BL Brushless ESC

XP SC1300-BL Brushless ESC

XP SC1300DB Brushless ESC

XP DS1313 Digital Servo

XP DS1015 Digital Servo

XP DS1510MG Digital Servo

Gear Set, DS1313

Gear Set, DS1015

Servo Case , DS1313/DS1015

Accessory Pack, DS1313/DS1015

TRS403-SSi 2.4GHz 4Ch Receiver

XP2G 2.4GHz Radio System

XP3G 2.4GHz Radio System

XP DS1505 Digital Servo

XP DS1505MG Digital Servo

XP DS1505 Metal Gear Set

XP DS1510 Metal Gear Set

XPSSi Receiver Antenna

25

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

26

:: Factory Team and Option Parts

6435

6443

6463

6465

6473

6565

6619

6910

6937

6943

6271

6272

6273

6274

6325

6366

6390

6416

6418

6431

6222

6241

6242

6259

6260

6261

6262

6263

6264

6270

897

1401

1402

1403

1405

1409

1736

1779

4449

6210

6220

6221

8264

8265

8266

8267

8268

8269

8270

8271

8272

9310

8253

8254

8255

8256

8257

8258

8259

8260

8261

8263

Bearing, 1/4 X 3/8, flanged

FT Titanium Turnbuckle, 1.30”, blue

FT Blue Titanium Turnbuckle, 1.375”

FT Titanium Turnbuckle, 1.65”, blue

FT Titanium Turnbuckle, 1.875”, blue

FT Titanium Turnbuckles, 1.00”, blue

FT Body Clips, Metallic Blue, Short

FT Servo Mount, Blue Aluminum

4-40 Aluminum Locknut, small pattern

Front Block Carrier, 30° Caster

Aluminum Front Inline Axle

Inline Steering Block

4-40/5-40 Nylon Locknut, black

RC10 Front End Screw Set

4-40 Steel Locknut

Turnbuckle Tie Rod Set, black

Turnbuckle, 1.00”, black

Turnbuckle, 1.25”, black

Turnbuckle, 1.65”, black

Turnbuckle, 2.06”, black

Turnbuckle, 1.375”, black

Short Ballstud, .20, Stainless Steel, short

Short Ballstud Set, Stainless Steel, short

Ballstud Dust Cover, foam

Long Ballstud, .30, silver

Ball Cup, molded

Transmission Brace, black

Rear Hub Carrier, 1.5° toe-in (per side), black

Rear Wheel Knockoffs, (2 prong) white

FT Gold Shock Shaft, 1.32” stroke

FT Gold shock shaft, .71” Stroke

Shock Kit, hard anodized, 1.32”

Rear Shock Body, hard anodized, 1.32”

Bleeder Shock Cap, 1:10.

1:10 Blank Shock Pistons

Shock Piston, PTFE (1, 2, 3)

Shock Bushing

RC10 Stealth Transmission Case, L & R

FT 1/8” Carbide Diff Balls

FT Blue Aluminum Screw Kit, RC10

FT 4-40 Aluminum Locknut, Blue Anodized

FT 8-32 Blue Aluminum Locknut

16T 48P Pinion Gear

17T 48P Pinion Gear

18T 48P Pinion Gear

19T 48P Pinion Gear

20T 48P Pinion Gear

21T 48P Pinion Gear

22T 48P Pinion Gear

23T 48P Pinion Gear

24T 48P Pinion Gear

26T 48P Pinion Gear

27T 48P Pinion Gear

28T 48P Pinion Gear

29T 48P Pinion Gear

30T 48P Pinion Gear

31T 48P Pinion Gear

32T 48P Pinion Gear

33T 48P Pinion Gear

34T 48P Pinion Gear

35T 48P Pinion Gear

Front Shock Body, .89” stroke

1

8

1

6

6

1

4

8

4ea

4

2

4

1

1

2

12

28

2

14

1

2

2

2

2

2

8

1

6

1

2

2

5

2

2

2

2

2

2

2

2

2

6

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: Reedy Motors and ESC’s

967

978

979

980

981

982

983

984

985

986

987

250

941S

954

955

956

957

958

962

965

966

240

241

242

243

244

245

246

247

248

249

228

231

232

233

233S

234

235

236

237

238

239

Sonic 540 Mach 2 25.5 Competition Brushless Motor

Sonic 540 Mach 2 21.5 Competition Brushless Motor

Sonic 540 Mach 2 17.5 Competition Brushless Motor

Sonic 540 Mach 2 13.5 Competition Brushless Motor

Sonic 540/540 Mach 2 Stator 13.5

Sonic 540 Mach 2 10.5 Competition Brushless Motor

Sonic 540 Mach 2 9.5 Competition Brushless Motor

Sonic 540 Mach 2 8.5 Competition Brushless Motor

Sonic 540 Mach 2 8.0 Competition Brushless Motor

Sonic 540 Mach 2 7.5 Competition Brushless Motor

Sonic 540 Mach 2 7.0 Competition Brushless Motor

Sonic 540 Mach 2 6.5 Competition Brushless Motor

Sonic 540 Mach 2 6.0 Competition Brushless Motor

Sonic 540 Mach 2 5.5 Competition Brushless Motor

Sonic 540 Mach 2 5.0 Competition Brushless Motor

Sonic 540 Mach 2 4.5 Competition Brushless Motor

Sonic 540 Mach 2 4.0 Competition Brushless Motor

Sonic 540 Mach 2 3.5 Competition Brushless Motor

Sonic 540 Mach 2 Sensor w/bearing

Sonic 540 Mach 2 Steel Bearing Set

Sonic 540 Mach 2 Ceramic Bearing Set

Sonic 540 Mach 2 Insulator Set

Sonic 540/540 Mach 2 Stator 17.5

Sonic 540 Stock Rotor 12.3 x 24.2 (7.25)

Sonic 540 Stock Rotor 12.3 x 25.0 (7.25)

Sonic 540 Stock Rotor 12.5 x 25.0 (7.25)

Sonic 540 Modified Rotor 12.2 x 25.0 (5.0)

Sonic 540 Modified Rotor 12.5 x 25.0 (5.0)

Sonic 540/540 Mach 2 Case Screws (3 pcs.)

Reedy 540-SL 3300kV/XP SC700-BL ESC Combo

Reedy 540-SL 3900kV/XP SC700-BL ESC Combo

Reedy 540-SL 4900kV/XP SC700-BL ESC Combo

Flat Sensor Wire 70mm

Flat Sensor Wire 110mm

Flat Sensor Wire 150mm

Flat Sensor Wire 200mm

Flat Sensor Wire 270mm

Reedy 540-SL 3300kV/XP SC1200-BL ESC Combo

Reedy 540-SL 3900kV/XP SC1200-BL ESC Combo

Reedy 540-SL 4900kV/XP SC1200-BL ESC Combo

Reedy 540-SL 6100kV/XP SC1200-BL ESC Combo

Sonic 540 Modified Rotor 13.0 x 25.0 (5.0)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: Reedy Batteries

684

693

694

695

700

730

731

732

734

736

738

739

302

309

313

602

637

681

682

683

AA Alkaline 1.5V (4)

LiPo 65C 7000mAh 7.4V

LiPo 65C 7000mAh 7.4V 5mm

LiPo 65C 4100mAh 7.4V Shorty

LiPo TX Battery - M11X 2500mAh 7.4V

Wolfpack 2400mAh 7.2V w/DEANS® connector

Wolfpack 3000mAh 7.2V w/DEANS® connector

Wolfpack 3600mAh 7.2V w/DEANS® connector

Wolfpack 4200mAh 7.2V w/DEANS® connector

Wolfpack 2400mAh 7.2V w/TAM connector

Wolfpack 3000mAh 7.2V w/TAM connector

Wolfpack 3600mAh 7.2V w/TAM connector

Wolfpack 4200mAh 7.2V w/TAM connector

Wolfpack LiPo 3000mAh 7.4V 25C w/DEANS®

Wolfpack LiPo 3300mAh 7.4V 35C w/DEANS®

Wolfpack LiPo 3400mAh 7.4V 35C w/DEANS®

Wolfpack LiPo 6500mAh 7.4V 25C w/DEANS®

Wolfpack LiPo 5000mAh 7.4V 25C

Wolfpack LiPo 3800mAh 7.4V 25C Shorty

Wolfpack LiPo 5500mAh 7.4V 60C

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: Qualifier Series Vehicles

7052

20111

20119

20510

30112

Pro Lite 4x4 RTR, 1/10 Scale (ready-to-run)

Rival Mini Monster Truck 1/18 Scale (ready-to-run)

APEX Mini Touring RTR

RIVAL Electric Monster Truck RTR, 1/8 Scale

(ready-to-run)

APEX Touring V-Type, 1/10 Scale (ready-to-run)

:: 1/18 Kits and RTR’s

20103

20121

RC18B2 - RC18T2 Team Kit

SC18 RTR Brushless (ready-to-run)

27

1

1

1

1

1

1

1

:: Reedy Accessories

716

961

962

974

975

978

979

980

981

982

992

655

656

657

658

659

660

661

663

664

669

610

643

644

645

646

647

648

649

650

654

247

248

249

250

604

606

607

609

Sonic 540 Mach 2 Sensor w/bearing

Sonic 540 Mach 2 Steel Bearing Set

Sonic 540 Mach 2 Ceramic Bearing Set

Sonic 540 Mach 2 Insulator Set

526-S AC/DC 2S-6S LiPo/LiFe Charger

Charge Harness 2S Saddle Pack 4mm

Charge Harness 2S Standard Pack 4mm

TAM to DEANS® charge adapter

447-S AC/DC NiMH Peak Charger

Low-Profile Bullet Connector, 4mm x 14mm (2)

Low-Profile Bullet Connector, 4mm x 14mm (10)

Low-Profile Bullet Connector, 5mm x 14mm (2)

Low-Profile Bullet Connector, 5mm x 14mm (10)

Pro Silicone Wire, 12AWG Black

Pro Silicone Wire, 14AWG Black

Silicone Wire 16AWG-Black (1m)

Shrink Tubing (Yellow, Orange, Red, Blue, Black)

4.0mm Bullet Plugs (2M, 2F)

4.0mm Bullet Plugs (2M, 10F)

4.0mm Bullet Plugs (10F)

4.0mm Bullet Plugs (100F)

4.0mm Bullet Plugs (10M)

4.0mm Bullet Plugs (30M)

3.5mm Bullet Plugs (3M, 3F)

3.5mm Bullet Plugs (10F)

3.5mm Bullet Plugs (10M)

3.5mm Bullet Plugs (30M)

5mm Bullet Connector

Reedy 09 Decal Set

Sonic 540/550 Timing Cap with Screws

Sonic 540 Case Screws

540-SL/550-SL Steel Bearing Set

540-SL/550-SL Ceramic Bearing Set

Flat Sensor Wire 70mm

Flat Sensor Wire 110mm

Flat Sensor Wire 150mm

Flat Sensor Wire 200mm

Flat Sensor Wire 270mm

Sonic 540 Rotor Spacers

1

1

1

1

1

1

1

1

3

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

3ea.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: 1/12, 1/10 Kits and RTR’s

7051

7054

7055

7093

8020

9041

9042

9050

9062

30101

4020

6002

7025

7028C

7030

7030C

7038

7039

7046

7049

7050

30109

90001

90003

90008

90010

RC12R5.2 Factory Team Kit

RC10 Worlds Car Kit

RC10T4.2 Factory Team Kit

SC10 Pro Comp RTR (ready-to-run) Combo

SC10 KMC Wheels Race Truck RTR (ready-to-run)

SC10 KMC Wheels RTR (ready-to-run) Combo

SC10.2 Factory Team Kit

RC10T4.2 RS RTR 2.4GHz Brushless (ready-to-run)

SC10 RS RTR, Lucas Oil (ready-to-run)

SC10 RS RTR, Rockstar/Makita (ready-to-run)

SC10 RS RTR, Hart and Huntington (ready-to-run)

SC10 RS RTR, Lucas Slick Mist® Body

SC10 RS RTR, Toyota Racing/TRD

SC10 RS RTR, Monster Energy Toyota

SC10GT RTR (ready-to-run)

RC10R5 Factory Team Kit

RC10B4.2 Factory Team Kit

RC10B4.2 RS RTR 2.4GHz Brushless (ready-to-run)

SC10B RS RTR (ready-to-run)

RC10B44.2 Factory Team 4WD Buggy Kit

TC4 Club Racer 4WD Touring Car Race Roller

RC10TC6.2 Factory Team 4WD Touring Car Kit

RC10B5 Team Kit

RC10B5M Team Kit

Limited Edition SC10 4x4 RTR Monster Energy

SC10 4x4 Factory Team Kit

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

28

:: 1/8 Kits and RTR’s

20501

20502

20503

20504

80906

80907

80908

80909

80912

80933

80934

MGT 4.60 SE RTR (ready-to-run)

MGT 8.0 Nitro RTR (ready-to-run)

Limited Edition MGT 4.60 Nitro RTR, w/flag body

(ready-to-run)

Limited Edition MGT 8.0 Nitro RTR, w/flag body

(ready-to-run)

RC8.2 Nitro Buggy Factory Team Kit

RC8.2e Electric Buggy Factory Team Kit

RC8.2e Electric Buggy RTR (ready-to-run)

RC8.2RS Nitro Buggy RTR (ready-to-run)

RC8T Championship Edition

SC8.2e Short Course Race Truck, Rockstar/Makita

Electric RTR (ready-to-run)

SC8.2e Short Course Race Truck, Slick Mist Electric

RTR (ready-to-run)

1663

1664

1665

1666

1667

1668

1669

1670

1671

1672

1673

1674

1590

1592

1655

1656

1657

1658

1659

1660

1661

1662

1548

1553

1554

1561

1562

1563

1564

1565

1567

1589

1111

1113

1449

1541

1542

1543

1544

1545

1546

1547

:: Tools

1719

1737

3718

3719

3720

6956

7494

7709

FT Turnbuckle Wrench

12mm Big Bore Shock Tool

FT Off Road Ride Height Gauge

FT Hex Driver Set, (7 pcs)

FT .050” Silver Hex Driver

FT 1/16” Black Hex Driver

FT 1.5mm Purple Hex Driver

FT 5/64” Blue Hex Driver

FT 3/32” Gold Hex Driver

FT 2.5mm Green Hex Driver

FT 3mm Red Hex Driver

FT Phillips Silver Screwdriver

FT Silver Spring Hook Tool

FT Nut Driver Set, (6 pcs)

FT 3/16” Black Nut Driver

FT 1/4” Red Nut Driver

FT 5.5mm Red Nut Driver

FT 11/32” Green Nut Driver

FT 8mm Gold Nut Driver

FT 5/64” Blue Ball Hex Driver

FT 3/32” Gold Ball Hex Driver

FT Ball Hex Driver Set, (3 pcs)

FT 8-Piece 1/4” Hex Drive Set

FT 1/4” Hex Drive Handle, without tips

FT 1/4” Hex Drive .050” Tip

FT 1/4” Hex Drive 1/16” Tip

FT 1/4” Hex Drive 5/64” - 2.0mm Tip

FT 1/4” Hex Drive 3/32” Tip

FT 1/4” Hex Drive 1.5mm Tip

FT 1/4” Hex Drive 2.5mm Tip

FT 1/4” Hex Drive 3/16” Nut Driver Tip

FT 1/4” Hex Drive 1/4” Nut Driver Tip

FT 1/4” Hex Drive 11/32” Nut Driver Tip

FT 1/4” Hex Drive 5.5mm Nut Driver Tip

FT 1/4” Hex Drive 7.0mm Nut Driver Tip

FT 1/4” Hex Drive 8.0mm Nut Driver Tip

FT 1/4” Hex Drive 5/64” - 2.0mm Ball End Tip

FT 1/4” Hex Drive 3/32” Ball End Tip

FT 1/4” Hex Drive Standard Screwdriver Tip

FT 1/4” Hex Drive Phillips Screwdriver Tip

FT 1/4” Hex Drive 2.5mm Ball End Tip

FT 1/4” 5 Piece Power Tool Tips Set (5/64-2.0mm,

1.5mm, 2.5mm, 5/64”- 2.0mm ball, 2.5mm ball)

FT Camber + Track Width Tool

FT Body Scissors

12 Inch Nylon Wire Ties

6 Inch Nylon Wire Ties

8 Inch Nylon Wire Ties

Molded Tools, Set

V2 Stamped Multi-tool

4 Inch Nylon Wire Ties

1

1

12

12

12

1

1

12

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: RePlay Cameras

RP034

RP036

RP038

RP041

RP042

RP043

RP044

RP045

RP046

RP047

RP048

RP049

RP054

RP001

RP002

RP021

RP022

RP023

RP024

RP029

RP030

RP032

RP033

Replay XD1080 Complete Camera System

Replay XD720 Complete Camera System

Replay XD1080 Lens Bezel Kit

Replay XD1080 Clear Lens Cover

Replay XD1080 Lens Bezel & Rear Cap O-Ring

Replay XD Lens Bezel

Replay XD1080 HDMI to Mini-HDMI

Replay XD1080 Mini 8-pin USB Charge Data Cable

USB DC Car Charger 1A Stubby

USB DC Car Charger 500mAh

Micro SDHC USB Reader

3M VHB 4991 Mount Adhesive for SnapTray

3M VHB 5962 Mount Adhesive for SnapTray

Replay XD Suction Cup Arm Mini Clamp

Replay XD Suction Cup Short Arm Base

Replay XD Skateboard Mount

Replay XD VHB SnapTray, Convex

Replay XD VHB SnapTray, Flat

Au Plug for Universal DC Wall Charger

Eu Plug for Universal DC Wall Charger

Uk Plug for Universal DC Wall Charger

Universal USB DC Wall Charger 1A

Replay ReView Field Monitor

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

:: Apparel

SP97**

SP98**

SP416

SP417

SP420**

SP421S

SP421L

SP422S

SP422L

SP423S

SP423L

SP424S

SP424L

715

110684

SP31**

SP32**

SP37**

SP38

SP39

SP71**

SP77**

SP78**

SP79**

SP84**

SP86**

SP90**

SP91**

SP92**

SP93**

SP94**

SP95**

SP96**

27 Time WC T-Shirt, Black (S, M, L, XL, 2XL, 3XL)

Kids AE 2012 T-Shirt, Blue (S, M, L)

Reedy 2012 T-shirt - Black (S, M, L, XL, 2XL, 3XL)

Reedy Trucker Hat

Reedy Patch

Associated Winter Jacket (M, L, XL)

AE 2012 T-Shirt, Blue (S, M, L, XL, 2XL, 3XL)

AE 2012 T-Shirt, White (S, M, L, XL, 2XL, 3XL)

AE 2012 T-Shirt, Black (S, M, L, XL, 2XL, 3XL)

Reedy 3D T-Shirt, Black (S, M, L, XL, 2XL, 3XL)

Reedy Womens 3D T-Shirt, Black (S, M)

AE Retro T-Shirt, Blue (S, M, L, XL, 2-5XL)

AE Retro T-Shirt, Black (S, M, L, XL, 2-5XL)

AE Retro T-Shirt, White (S, M, L, XL, 2-5XL)

2013 Worlds T-Shirt, Blue (S, M, L, XL, 2-5XL)

2013 Worlds T-Shirt, Black (S, M, L, XL, 2-5XL)

2013 Worlds Hoodie, Black (S, M, L, XL, 2-3XL)

AE Retro Womens T-Shirt, Pink (S, M, L, XL)

AE Retro Womens T-Shirt, Black (S, M, L, XL)

AE Womens T-Shirt, Black (S, M, L, XL)

Associated Car Carrier Bag, Medium

1/10 FT Motor Bag

AE Pit Gloves (L, XL)

AE 2012 Hat, Black, Flat Bill, S/M

AE 2012 Hat, Black, Flat Bill, L/XL

AE 2012 Hat, Black, Curved Bill, S/M

AE 2012 Hat, Black, Curved Bill, L/XL

AE 2012 Hat, White, Flat Bill, S/M

AE 2012 Hat, White, Flat Bill, L/XL

AE 2012 Hat, White, Curved Bill, S/M

AE 2012 Hat, White, Curved Bill, L/XL

Reedy 2009 Track Banner

Team Associated Track Banner

1

1

1

1

1

1

1

1

1

Pr.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

** Use part number plus the desired size when ordering!

Ride Height / Wheelbase

Front

Ride

Height:

Driver: Date:

Track: Event:

Conditions: Indoor Outdoor Temp. Rev.1

Rear Suspension

Camber:

Rear

Ride

Height:

1

2

3 4

Rear Hub

Carriers:

1.5°

Wheelbase:

Short

Long

Front Suspension

1

2

3

Camber:

Toe:

Steering Block:

Inline

Trailing

1

2

I O

Caster:

15°

30°

0 3 6 9

2 5 8

1 4 7

A B C D

Rear Drive Shafts:

CVA

Dogbone

Front Shocks

Spring: Piston:

Shock

Electronics

Motor & Wind:

Gear:

Batteries:

Drivetrain

Slipper:

2 Pads

Notes:

3 Pads 4 Pads

Weight

Battery Placement:

Ballast Weight:

Notes:

Front Tires

Tire:

Compound:

Rear Shocks

Spring: Piston:

Shock

Radio / ESC Settings

Radio:

Throttle / Brake e.p.a:

Throttle / Brake expo:

Servo:

ESC:

ESC Settings:

Other

Body Type:

Wing Type:

Rear Tires

Tire:

Compound:

Race and Vehicle Comments

Qualify:

Comments:

Track Info

Surface:

Dirt

Carpet

Astro

Multi

Traction:

Low

Med

High

:: For more setups, visit RC10.com and click on “Setup Sheets”

Conditions:

Grooved

Dusty

Smooth

Bumpy

Hard Pack

Loamy

Moisture:

Wet

Damp

Dry

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement