Superior Design for Convenience WH200 ComLink All-in-One Digital Headset ComLink Highlights

Superior Design for Convenience WH200 ComLink All-in-One Digital Headset ComLink Highlights
TM
WH200 ComLink
All-in-One Digital Headset
Superior Design for Convenience
Wireless intercom systems just got easier to use with the new,
digital 2.4 GHz WH200 ComLink all-in-one headset from HME.
This ergonomic, lightweight headset offers all the convenience
of a traditional beltpac intercom system in a unique, form-fitting
design. Weighing only 5.7 ounces, ComLink is the lightest, most
comfortable, all-in-one headset on the market.
ComLink enables sound professionals to work in dark or small
locations without the risk of snagging headset cables on other
equipment. The frequency hopping spread spectrum ensures
secure communication through 64-bit encryption. No license
required, ComLink is compatible with HME’s portable DX100
or rack-mounted DX200 base station.
Call toll-free (800) 848-4468 or your authorized dealer for
more information.
ComLink Highlights
> 2.4 GHz License-Free Operation
is approved for worldwide
use; no need to coordinate
frequency operation with
other wireless systems.
> Internal Antennas
are housed inside the communicator for extra durability.
> User-Friendly LEDs
and simple controls make the
communicator perfect for fast,
convenient communications.
You can also turn off the LEDs
for less conspicuous operation.
> Rechargeable Lithium-Ion
Batteries
provide 20 hours of communicator
operation with each charge.
> Voice Prompts
inform users of status changes,
such as "change battery" or "out
of range."
> Expandable System
can support up to 15 users per
base station, four of whom can
simultaneously converse with
each other in hands-free, fullduplex mode.
> Super Compact Design
makes ComLink the industry’s
lightest. It is ergonomically
designed with sealed controls
for easy, reliable operation.
> Four-Port Fast Battery Charger
charges batteries in less than
3 hours.
The all-in-one ComLink headset provides crystal-clear, digital
communications and more convenience to wireless intercom users.
WH200 ComLink All-in-One Digital Headset
System Specifications
RF Frequency Range . . . . . .2400-2483.5 MHz
Frequency Response . . . . . .200 Hz to 3.5 kHz
Distortion . . . . . . . . . . . . . . . . .<2%
RF Sensitivity . . . . . . . . . . . . . .<-90dBm with 10-3 BER
Temperature Range . . . . . . .-20 to 55ºC (-4 to 131ºF) Typ.
Transmit/Receive Type . . . .Frequency Hopping Spread Spectrum (FHSS)
Modulation Type . . . . . . . . . .Gaussian Filtered FSK,TDMA
FCC License . . . . . . . . . . . . . . .None Required
ComLink Specifications
Transmit Power . . . . . . . . . . .100 mW Burst
Antenna . . . . . . . . . . . . . . . . . .Internal
Headset Output . . . . . . . . . . .160 mW into 32Ω
Weight . . . . . . . . . . . . . . . . . . .5.7 oz (0.16 kg) with Battery
Battery Requirements . . . .One Lithium-Ion Rechargeable
Battery Life . . . . . . . . . . . . . . .Up to 20 Hrs
FCC Acceptance . . . . . . . . . . .Part 15
Base Station Highlights
> Digital 2.4 GHz
License-Free Operation
with digital encryption and frequency
hopping spread spectrum gives you
exceptionally clear sound without
licensing costs for secure, interferencefree communication.
> Up to 4 Communicators
can be used in hands-free, full-duplex
mode per base station. Different
communicator configurations can
be assigned up to a maximum
number of 15 per base station.
> Remotely “Unlatch” Communicators
from Transmitting
at the base to stop a rogue communicator that’s been left transmitting.
> Expandable System
(DX200 Base only) up to 16 communicators can be used in hands-free, fullduplex mode with extra base stations.
> Wired Intercom Interface
(DX200 Base only) supports one
hardwired intercom channel
using 2-wire, 4-wire, or both simultaneously. Compatible with RTS®
and ClearCom® 2-wire intercom
systems. ISO+ mode gives you an
additional 4-wire intercom interface
by using the AUX IN and AUX OUT
connections — making your system
operate as a 2-channel intercom.
> Headset Interface
(DX200 Base only) allows the base
station operator direct access to
the IC channel, AUX IN/OUT as well
as communicators.
See HME DX200 brochure or DX100 data sheet for base station specifications.
> Three Power Source Options
(DX100 Base only) give you more
flexibility in powering the base.
Choose among a supplied AC
adapter, external DC source or
batteries (also serve as a power
outage backup).
HM Electronics, Inc. 14110 Stowe Drive, Poway, CA 92064 | USA | www.hme.com | TEL: (800) 848.4468 or (858) 535.6151 | FAX: (858) 552.0139
© 2006 HM Electronics, Inc. The HME logo and product names are registered trademarks of HM Electronics, Inc. All rights reserved.
LT06-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement