PD133-711

PD133-711
MODEL NUMBER:
Document Number:
PD133-711 24” ELED TV Table Stand
Your Source for Healthcare and
Wellness Infotainment™
Installation Instructions
PD196-282R1
Page 1 of 1
SCOPE:
To install a PD133-711 table stand to a 24” ELED TV.
PARTS LIST:
1. PD133-711 table stand
2. (2) M4x10mm Phillips Cheese head machine screws
TOOL LIST:
1. Safety glasses/goggles
2. Drill and bit for screw.
SAFETY STEPS:
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
3. Only place TV on stable flat surface when using the stand.
PROCEDURE
1. Remove table stand and screws from box and protective cover.
2. Lay TV face down on flat, stable surface
3. Place stem of stand into bottom of TV and using drill, secure with 2 supplied screws as shown.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement