awk-1131a series
Datasheet
AWK-1131A Series
Industrial 802.11n Access Point
››IEEE 802.11a/b/g/n compliant
››Up to 300 Mbps data rate
››MIMO technology increases data throughput and range
››Supports client-based Turbo Roaming
››One Gigabit Ethernet LAN port
››Higher noise avoidance protection
››802.11 dynamic frequency selection (DFS) (Pending)
Introduction
The AWK-1131A industrial wireless AP/client meets the growing
need for faster data transmission speeds by supporting IEEE 802.11n
technology with a net data rate of up to 300 Mbps. The AWK-1131A
is compliant with the industrial standards and approvals, covering
operating temperature, power input voltage, surge, ESD and vibration.
The two redundant DC power inputs increase the reliability of the
power supply. The AWK-1131A can operate on either the 2.4 or 5
GHz bands and is backwards-compatible with existing 802.11a/b/g
deployments to future-proof your wireless investments.
Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 (4 channels)
5.260 to 5.320 (4 channels)*
5.500 to 5.700 GHz (8 channels - excludes 5.600 to 5.640 GHz)*
5.745 to 5.825 GHz (5 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 (4 channels)
5.260 to 5.320 (4 channels)*
5.500 to 5.700 GHz (11 channels)*
JP:
2.412 to 2.484 GHz (14 channels, DSSS)
5.180 to 5.240 (4 channels)
5.260 to 5.320 (4 channels)*
5.500 to 5.700 GHz (11 channels)*
Amplicon.com
Improved Higher Data Rate and Channel Capacity
• High-speed wireless connectivity with up to 300 Mbps data rate
• MIMO technology to improve the capability of transmitting and
receiving multiple data streams
• Increased channel width with channel bonding technology
• Supports flexible channel selection to build up wireless
communication system with DFS(Pending)
Specifications for Industrial-grade Applications
• Redundant DC power inputs
• Integrated design with enhanced protection technology to gain
higher noise avoidance level
• IP30 compact size aluminum housing
*Note: These channels are not supported in AWK-1131A as the DFS certification
has not been passed. Please check Moxa’s website for the most up-to-date DFS
status.
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and
Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power (per antenna port):
2.4 GHz
802.11b:
Typ. 23±1.5 dBm @ 1 Mbps
Typ. 20±1.5 dBm @ 5 Mbps
Typ. 19±1.5 dBm @ 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps
Typ. 19±1.5 dBm @ 36 Mbps
Typ. 18±1.5 dBm @ 48 Mbps
Typ. 17±1.5 dBm @ 54 Mbps
802.11n (20 MHz):
MCS0, [email protected] MHz: Typ. 20 dBm (± 1.5 dBm)
MCS7, [email protected] MHz: Typ. 16 dBm (± 1.5 dBm)
MCS0, [email protected] MHz: Typ. 20 dBm (± 1.5 dBm)
MCS7, [email protected] MHz: Typ. 16 dBm (± 1.5 dBm)
5 GHz
802.11a:
Typ. 20±1.5 dBm @ 6 to 24 Mbps
Typ. 19±1.5 dBm @ 36 Mbps
Typ. 16±1.5 dBm @ 48 Mbps
Typ. 15±1.5 dBm @ 54 Mbps
IT and Instrumentation for industry
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: [email protected]
Datasheet
Protocol Support
802.11n (20/40 MHz):
MCS0, [email protected] MHz: Typ. 19 dBm (± 1.5 dBm)
MCS7, [email protected] MHz: Typ. 14 dBm (± 1.5 dBm)
MCS0, [email protected] MHz: Typ. 18 dBm (± 1.5 dBm)
MCS7, [email protected] MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity:
2.4 GHz
802.11b:
-92 dBm @ 1 Mbps,
-90 dBm @ 2 Mbps,
-88 dBm @ 5.5 Mbps,
-84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps,
-86 dBm @ 9 Mbps,
-85 dBm @ 12 Mbps,
-82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps,
-76 dBm @ 36 Mbps,
-74 dBm @ 48 Mbps,
-72 dBm @ 54 Mbps
802.11n:
-69 dBm @ MCS15 20MHz
-71 dBm @ MCS7 20MHz
5 GHz
802.11a:
-87 dBm @ 6 Mbps,
-86 dBm @ 9 Mbps,
-85 dBm @ 12 Mbps,
-82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps,
-76 dBm @ 36 Mbps,
-74 dBm @ 48 Mbps,
-72 dBm @ 54 Mbps
802.11n:
-68 dBm @ MCS15 40MHz
-69 dBm @ MCS15 20MHz
-70 dBm @ MCS7 40MHz
-71 dBm @ MCS7 20MHz
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP,
TCP, UDP, RADIUS, SNMP, PPPoE, DHCP, LLDP
AP-only Protocols: ARP, BOOTP, DHCP
Interface
Default Antennas:
2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas: RP-SMA (female)
RJ45 Ports: 1, 10/100/1000BaseT(X) auto negotiation speed, F/H
duplex mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45-type)
Reset: Present
LED Indicators: PWR, FAULT, STATE, SIGNAL, WLAN, 10/100/1000
(RJ45 port)
Physical Characteristics
Housing: Metal, providing IP30 protection
Dimensions: 58 x 115 x 70 mm (2.28 x 4.53 x 2.76 in)
Installation: DIN-rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs
Connector: 4-pin removable terminal block
Power Consumption: 6.72 W (12 V/0.56 A to 48 V/0.14 A), 25°C
Reverse Polarity Protection: Present
Standards and Certifications
Safety: UL 60950-1, EN 60950-1
EMC: EN 301 489-1/17, FCC Part 15 Subpart B Class B, EN
55022/55024
Radio: EN 300 328, EN 301 893, TELEC
Note: Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF : 810,022 hrs
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
Unit: mm (inch)
115 (4.53)
AWK-1131A
58 (2.29)
Front View
70 (2.76)
78.8 (3.10)
Side View
Rear View
Top & Bottom Views
Ordering Information
Available Models
Package Checklist
Note: Please visit Moxa’s website for a complete list of optional wireless accessories and antennas available for Moxa’s
wireless products.
•
•
•
•
•
•
•
AWK-1131A-US: 802.11n Access Point, US band, 0 to 60°C
AWK-1131A-EU: 802.11n Access Point, EU band, 0 to 60°C
AWK-1131A-JP: 802.11n Access Point, JP band, 0 to 60°C
Amplicon.com
AWK-1131A
2 2dBi dual band antenna
1 plastic RJ45 protective caps
Din-rail kit
Quick installation guide (printed)
Document and software CD
Warranty card
IT and Instrumentation for industry
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement