MIC 3390
MIC-3390
6U CompactPCI® Intel® Pentium®
M Processor-based Board with
Dual PCIe GbE/DDR2/SATA/PMC
Features
 Supports low-power Intel® Pentium® M processor at up to 2.0 GHz in a
479-pin Micro-FCPGA socket
 PCI Express dual Gigabit Ethernet on board
 Dual channel DDR2 400/533 MHz SDRAM up to 2 GB
 PICMG 2.16 R1.0 CompactPCI® packet switching backplane specification
compliant
 PICMG 2.9 R1.0 CompactPCI system management specification compliant
 PICMG 2.1 R2.0 CompactPCI hot swap specification compliant
 Onboard SATA 2.5" HDD bay, PMC connector and CompactFlash socket
Introduction
The MIC-3390 single board computer is designed to offer embedded system builders the best value in low-power Intel Pentium M computing. The Intel Pentium M processor, Mobile
Intel 915GME Express chipset and Intel I/O Controller Hub ICH6M, enables the MIC-3390 to deliver great computing performance, connectivity and throughput without compromising
system thermal design. The MIC-3390 Graphic Memory Controller Hub and ICH6M provide an optimized integrated memory, graphics and I/O solution. The MIC-3390 is validated
for all Intel Pentium M processors, and supports up to 2 GB of 400/533 MHz DDR2 memory in dual-channel SODIMMs.
The MIC-3390 maximizes I/O throughput with the ICH6-M’s PCI Express (PCIe) ports. The two Intel 82573E Ethernet controllers are linked directly using PCIe connectivity for a total
bidirectional peak bandwidth of 2 Gb/s. Another PCIe lane connects to a PCIe to PCI-X Bridge to provide a 64-bit / 100 MHz data path for the PMC and a 64-bit / 66 MHz data path
for the CompactPCI Bridge. The flexibility of the bridge allows the MIC-3390 to be used in a system slot or a peripheral slot as an intelligent I/O processor or as an application blade
in a multi-processor or clustered architecture. In addition to a full array of industry standard I/O features, ICH6M provides two Serial ATA ports for high speed data transfers up to
150 MB/s. One port is routed to rear I/O and the other port is routed to both the onboard 2.5" SATA drive and rear I/O for a greater choice of connectivity. With an optional mezzanine
card, the MIC-3390 provides a fully compatible IPMI 2.0 interface with LAN and serial port support for out-of-band management.
Specifications
Processor System
Bus
Memory
Graphics
Ethernet
Storage
Bridge
I/O Interface
Operating System
Hardware Monitor
Watchdog Timer
PMC
CPU (Not Included)
Max. Speed
Chipset
BIOS
Front Side Bus
PCI
Technology
Max. Capacity
Socket
Controller
VRAM
Resolution
Interface
Controller
I/O Connector
Mode
Channels
Storage Site
Bus
Interface
Serial (COM1)
Compatibility
Controller
Monitor
Output
Interval
Site
Interface
Signal
All product specifications are subject to change without notice
Intel Pentium M Processor (Socket 479)
2.0 GHz (2 MB L2 cache)
Intel 915GME
Award™ 8 Mbit flash
400/533 MHz
Up to 64-bit/100 MHz (PCI-X support)
DDR2 400/533 MHz SDRAM
2 GB
SODIMM x 2
Integrated in Intel 915GME
Dynamic
Up to 2048 x 1536, 64k color at 75 Hz
10/100/1000 Mbps Ethernet
Intel 82573E x 2
RJ-45 x 2 (front)
SATA
1
One SATA connector and space reserved for embedded 2.5" HDD
PCI 64-bit/66 MHz
Universal (System/Peripheral mode capability)
RJ-45 x 1 (front)
Windows® XP/2000/NT 4.0, Red Hat Fedora Core 3
Winbond W83782D
CPU temperature, +3.3 V, +5 V, +12 V
System reset
Programmable, 0 ~ 255 sec.
1
PCI Mezzanine (IEEE1386.1 compliant)
+5 V/+3.3 V compliant
Last updated : 17-Jun-2010
MIC-3390
Specifications Cont.
Miscellaneous
Power Requirement
(Intel 1.8 GHz with 1 GB
memory)
Physical Characteristics
Solid State Disk
LED Indicator
USB 2.0
Real Time Clock
Voltage
Typical
Maximum
Dimensions (W x D)
Weight
One CompactFlash socket
HDD, Power, Hot swap, system/peripheral
2 channels
Built-in
+3.3 V
+5 V
4A
4A
4.2 A
6.2 A
233.35 x 160 mm (9.19" x 6.3"), 1-slot width
0.8 kg (1.76 lb)
Operating
0 ~ 65° C (32 ~ 149° F)
20 G
+12 V
< 12 mA
< 20 mA
Non-Operating
-40 ~ 70° C (-40 ~ 140° F)
95% @ 60° C (non-condensing)
50 G
5 ~ 500Hz, 3.5Grms
Temperature
Humidity
Shock
Vibration
Altitude
4000 m above sea level
Airflow
300 LFM=1.54 m/s
Conformance
FCC Class A, CE
NEBS Level 3
Design for GR-63-core & GR-1089-core
PICMG 2.0 R3.0 CompactPCI Specification
PICMG 2.1 R2.0 CompactPCI Hot Swap Specification
PICMG 2.9 R1.0 CompactPCI System Management Specification
PICMG 2.16 R1.0 CompactPCI Packet Switching Backplane Specification
Environment
Regulatory
Compliance
-12 V
< 65 mA
< 57 mA
Recommended Configurations
CPU Board
PMC Module
MIC-3390E, MIC-3390-AE
MIC-3665-AE, MIC-3665-BE
Rear I/O Board
RIO-3310AE, RIO-3310S-A1E,
RIO-3310S-A2E
Enclosure
MIC-3039-B, MIC-3042, MIC-3043, MIC-3081B, MIC-3056
Rear Transition Board
Part Number
RIO-3310AE
RIO-3310S-A1E
RIO-3310S-A2E
KB &
Mouse
1
1
1
GbE
COM2*
LAN
1
2
1
2
1
2
Rear Panel
10/100Base-T
VGA USB
LAN
1
1
1
1
1
1
1
1
1
Onboard Header/Socket/Connector
SCSI** IDE
SATA
FDD COM1 SCSI** PRT
USB
Conn.
1
1
1
1
1
1
1
1
1
1
J3/J5
J3/J5
J3/J5
1
1
1
1
1
1
1
1
1
1
1
Slot
Width
1
1
1
* Optional 3rd LAN port occupies the rear COM2 port
** Internal Ultra 320 SCSI port with optional external rear I/O port
Ordering Information
Part Number
MIC-3390E
MIC-3390-AE
One CompactFlash
socket
Two DIMM sockets
LAN
2
2
COM
1
1
Front Panel I/O
PMC
USB
1
2
1
2
VGA
1
1
CPU
-
One 64-bit/66 MHz
PMC connector
Memory
-
Main Onboard Features
CF Socket
IDE Channel
1
2.5" SATA HDD
1
2.5" SATA HDD
Slot Width
1
1
IPMI BMC Module
1
One PMC knockout
Two RJ-45 Gigabit LAN ports
Two USB 2.0 ports
One passive CPU
heat sink
One DB-15 VGA port
One RJ-45 COM1 port
Online Download www.advantech.com/products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement