stainless steel jug kettle ™ ®
stainless steel
jug kettle
This appliance can be used
by children aged from 8
years and above if they have
been given supervision or
instruction concerning use of
the appliance in a safe way
and if they understand the
hazards involved. Cleaning
and user maintenance shall
not be made by children
unless they are older than
8 and supervised. Keep the
appliance and its cord out of
reach of children aged less
than 8 years.
Children shall not play with
the appliance.
Never use a power base other
than the one supplied with the
Never fill the kettle above the
MAX marking. If the kettle is
overfilled, boiling water may
be ejected.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
!! This appliance generates heat during
use. Adequate precaution must be taken
to prevent the risk of burns, scalds, fires
or other damage to persons or property
caused by touching the exterior whilst in
use or during cooling.
!! Never use this appliance for anything
other than its intended use. This
appliance is for household use only. Do
not use this appliance outdoors.
!! Always ensure that hands are dry before
handling the plug or switching on the
!! Always use the appliance on a stable,
secure, dry and level surface.
!! This appliance must not be placed on or
near any potentially hot surfaces (such
as a gas or electric hob).
!! Do not use the appliance if it has been
dropped, if there are any visible signs of
damage or if it is leaking.
!! Ensure the appliance is switched off and
unplugged from the supply socket after
use and before cleaning.
!! Always allow the appliance to cool
before cleaning or storing.
!! Never immerse any part of the
appliance or power cord and plug in
water or any other liquid.
!! Never let the power cord hang over the
edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!! Never leave the appliance unattended
when in use.
!! Beware of steam coming from the spout
or lid especially during refilling. Never
open the lid during the boiling cycle.
!! Never fill the appliance when it is
positioned on the power base.
!! Never use the kettle without sufficient
water in the kettle for it to operate
!! Never allow the appliance to boil dry.
Hinged lid with lid release latch
3 Handle
On/Off switch
360° rotational power base with cord storage
Easy clean, fast boil concealed element
Dual illuminated water level windows
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
Remove any packaging and promotional
material from your kettle and position it on
a stable, secure, dry and level work surface
away from the edge.
5. When the kettle is switched on, the
water level windows will illuminate.
Before connecting to a power source,
make sure your mains supply voltage
is the same as the one indicated on the
appliance. Connect the plug to a suitable
power outlet and make sure that the power
cord does not overhang the work surface.
Excess power cord can be stored in the
power base.
7. You may also switch your kettle off
manually at any time by moving the
switch to the off position.
Remove the kettle from the power base
and open the lid. Fill your kettle to the
maximum mark and close the lid.
• Only boil the water you need. Overfilling
your kettle by one cup is the equivalent
to using an energy saving light bulb for
one hour!
Place your kettle back onto the power
base. Switch your kettle on, allow it to boil
then discard the water. Repeat twice. This
will remove any residue left over from the
manufacturing process.
If this kettle is filled above the
maximum level mark, hot water may be
ejected from the spout during boiling.
Beware of steam coming from the spout
or lid especially during refilling. Never
open the lid when the kettle is boiling.
1. With your kettle switched off, plug the
power base into a suitable power outlet.
2. Remove your kettle from the power
base before filling it with water.
3. Fill your kettle with water. You can
fill it through the spout or by opening
the lid. Don’t overfill your kettle and
always ensure that there is sufficient
water in your kettle for it to operate
correctly. This is approximately 250ml
or 1 teacup full. Always check the water
level when your kettle is positioned on
its power base.
4. If opened previously, close the lid and
then switch your kettle on. Make sure
that the lid is correctly closed to ensure
safe operation.
6. When the water reaches boiling point,
your kettle will switch off automatically.
A Breville® kettle, if used correctly, is a very
energy efficient device. Why not try some
of these energy saving tips:
• It is not always necessary to re-boil
your kettle. For example, one litre of
water will still be at 90°C after five
minutes - the perfect temperature for a
cup of coffee.
If the kettle is operated with insufficient
water a built in fail-safe device will
automatically switch it off.
• Unplug your kettle and allow it to cool.
When it has cooled down sufficiently
the safety device will reset itself.
• Once the safety device has reset, refill
your kettle with cold water and use it as
Always unplug the kettle from the
mains supply socket and allow it to
completely cool down before cleaning
or descaling it. Do not immerse the
kettle, power base or power cord and
plug in water or any other liquid.
For additional or replacement parts, please
visit or call us on 0161
621 6900.
1. Clean the exterior surface of the kettle
with a damp cloth and then polish with
a soft dry cloth. Do not use steel wool
pads or harsh/abrasive cleaners.
2. Descale your kettle regularly to keep
it working efficiently. Use a proprietary
descaling product following the
manufacturer’s instructions carefully.
Before removing or refitting the
filter, switch off the kettle and empty it.
Allow it to cool completely, then unplug
the power base from the mains supply
socket. Never operate the kettle without
the filter fitted.
For troubleshooting and FAQs visit:
Let the Breville® team help you turn on your
creativity with a gateway to a world of food
and drinks without limits. You don’t have to
travel far—just to your computer, tablet or
mobile—where you will discover our FREE
website with top tips and recipes to inspire
your imagination. Join us now at:
• Open the lid and remove the filter from
behind the spout.
• Rinse the filter under a tap whilst
brushing it with a soft brush.
• In hard water areas it may be
necessary to descale the filter using a
descaling product. Use a proprietary
descaling product following the
manufacturer’s instructions carefully.
• The filter may be washed safely in the
cutlery rack of a dishwasher.
• Refit the filter back into your kettle.
This appliance must be earthed.
If the plug is not suitable for the socket
outlets in your home, it can be removed
and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be
changed, the fuse cover must be refitted.
The appliance must not be used without
the fuse cover fitted.
If the plug is unsuitable, it should be
dismantled and removed from the supply
cord and an appropriate plug fitted as
detailed. If you remove the plug it must not
be connected to a 13 amp socket and the
plug must be disposed of immediately.
If the terminals in the plug are not marked
or if you are unsure about the installation
of the plug please contact a qualified
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Fuse 13A
These appliances are built to the very
highest of standards. There are no user
serviceable parts. Follow these steps if the
unit fails to operate:
• Check the instructions have been
followed correctly.
• Check that the fuse has not blown.
• Check that the mains supply is
If the appliance will still not operate, return
the appliance to the place it was purchased
for a replacement. To return the appliance
to the Customer Service Department,
follow the steps below:
1. Pack it carefully (preferably in the
original carton). Ensure the unit is
2. Enclose your name and address and
quote the model number (located on
the rating label) on all correspondence.
3. Give the reason why you are returning it.
4. If within the guarantee period, state
when and where it was purchased
and include proof of purchase (e.g. till
5. Send it to our Customer Service
Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
Ensure that the outer sheath of
the cable is firmly held by the cord grip
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: [email protected]
Please keep your receipt as this will
be required for any claims under this
This appliance is guaranteed for 1 year
after your purchase as described in this
During this guaranteed period, if in the
unlikely event the appliance no longer
functions due to a design or manufacturing
fault, please take it back to the place of
purchase, with your till receipt and a copy
of this guarantee.
The rights and benefits under this
guarantee are additional to your statutory
rights, which are not affected by this
guarantee. Only Jarden Consumer
Solutions (Europe) Limited (“JCS
(Europe)”) has the right to change these
JCS (Europe) undertakes within the
guarantee period to repair or replace the
appliance, or any part of appliance found
to be not working properly free of charge
provided that:
The rights under this guarantee shall only
apply to the original purchaser and shall
not extend to commercial or communal
If your appliance includes a countryspecific guarantee or warranty insert
please refer to the terms and conditions of
such guarantee or warranty in place of this
guarantee or contact your local authorized
dealer for more information.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. E-mail us at
en[email protected] for further
recycling and WEEE information.
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside
Cheadle Royal Business Park
• you promptly notify the place of
purchase or JCS (Europe) of the
problem; and
• the appliance has not been altered
in any way or subjected to damage,
misuse, abuse, repair or alteration by a
person other than a person authorised
by JCS (Europe).
Faults that occur through, improper use,
damage, abuse, use with incorrect voltage,
acts of nature, events beyond the control
of JCS (Europe), repair or alteration by
a person other than a person authorised
by JCS (Europe) or failure to follow
instructions for use are not covered by
this guarantee. Additionally, normal wear
and tear, including, but not limited to,
minor discoloration and scratches are not
covered by this guarantee.
Jarden Consumer Solutions (Europe) Limited
Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom
e-mail: [email protected]
Telephone: 0161 621 6900
For Customer Service details, please see the website.
© 2015 Jarden Consumer Solutions (Europe) Limited
All rights reserved. Imported and distributed by Jarden Consumer Solutions (Europe) Limited,
Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom.
The product supplied may differ slightly from the one illustrated due to continuing product development.
Printed in China
VKJ670_Iss_3 02/15
93460-2 UKPUL
P.N. 181591
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF