EN-2800H-CM-R
EPIC a
EN-2800H-CM-S
EN-2800H-CM-R
2U Rack-Mounted SAS/SATA II NAS Subsystems
Companies are looking for cost-effective storage solutions which can offer the best performance, high
scalability and reliability. As the number of users and the amount of data grows, Network Attached
Storage is becoming a critical technology and the need for an optimized solution is becoming an
important requirement.
The EN-2800H-CM (SAS/SATA II NAS Subsystem) is a reliable, cost-effective way to add storage
to the network. It comes with 8 drive trays accommodating 3.5" SAS or SATA II drives while SAS or
SATA single connector architecture enables true hot swap capability. Built-in Intel Celeron 1.6G CPU
(or above), 2GB DDR2-667MHz SDRAM and two Gigabit Ethernet ports offers high performance NAS
platform. Linux based embedded OS design within Disk on Module for guarantee reliability and boot
quickly. The EN-2800H-CM system is managed by proNAS 1.x operating system, it enhances system
availability, and manages complex storage environments easily. EN-2800H-CM Equipped with RAID
function to offer fault tolerant data protection. It is a full featured data protection supporting RAID levels 0、
1、5、10、JBOD.
Features
- Configurable to 19” rack-mountable 2U chassis
- Supports up to Eight (8) 1” hot-swappable SAS / SATA II hard drives
- Supports RAID levels 0、1、5、10、JBOD
- Smart-functional LCD panel
- Supports auto-hot spare and automatic hot rebuild
- 64 bit Linux based embedded OS design
- Supports Tape/DAT backup/restore (Optional)
- Centralization of Data and Storage Management
- Latest volume snapshot technology
- Apply volume replication to enhance data protection
- Data Backup via backup plan and scheduling
- Enhance system configuration backup
- Local and external account management
- Large account import
- Share management and permission
- Advance ACL setting for project share
- Support Internet Gateway function
- Online expansion file system
- Support E-mail notification and system log information
- Multi application support via proFamily
- Multi protocol support (TCP/IP, SMB/CIFS, NFS, SNMP, FTP/SFTP/FXP, HTTP, Telnet, SSH,
(Novell by TCP/IP),(Mac by SMB/CIFS/AFP))
www.proware.com.tw
Series Technical Specifications
EN-2800H-CM-S / EN-2800H-CM-R
NAS Hardware Specification
Intel Celeron 1.6G CPU (or above)
Power Requirements
Cache memory : 2GB DDR II 533/667 MHz
AC 100V ~ 240V Full Range
Supports 8 SAS / SATA II hard drives
8A ~ 4A, 50 ~ 60Hz
Two Gigabit Ethernet port
Environmental
Environmental monitoring
Relative Humidity : 10% ~ 85% Non-condensing
400W x 1 prower supply with PFC (upgradeable) (EN-2800H-CM-S)
Operating Temp : 10OC ~ 40OC (50OF ~ 104OF)
400W x 2 redundant power supplies with PFC (EN-2800H-CM-R)
RAID Controller
Physical Dimensions : 88(H) x 482(W) x 500(D)mm
Weight : 12.5 Kg (without disk drives)
Highpoint 3G SAS RocketRAID 2680
Suport RAID level : 0、1、5、10、JBOD
NAS Functionaility
Storage Management
Protocols
Volume Management
TCP/IP, SMB/CIFS, NFS, SNMP, FTP/SFTP/FXP, HTTP, Telnet, SSH,
Disk usage statistics
(Novell by TCP/IP),(Mac by SMB/CIFS/AFP)
Hot spare capability
Authentication
iSCSI Target Manager : Support LUN Mapping / Initiator filter
Local User Account/Group
FC Target Manager : Support LUN Mapping / WWN filter
Microsoft NT Domain Controller (PDC)
General
Microsoft Active Directory Authentication (ADS)
File Server Independent
Network Information Service (NIS)
Multiple language support
Support batch creating users/Group
Support UPS management
User quota management
System Management
Share level security
Automatic IP address configuration
File level security
Self-contained unit - no extras needed
User ID security for NFS
Management through Web browser
Recycle bin (Samba)
Flash upgradeable unit
Audit file access (Samba)
SNMP / MRTG management and notification
Block Storage
Fail-free online firmware upgrade
iSCSI Target Support
Unicode support
Fiber Target Support (optional)
Multi-node Management GUI
Data Backup / Restore
proNAS Data and Configuration Backup
Symantec BackupExec Agent (by extra installation)
Central Management
Scheduling Multi-Snapshot
Networking
Replication(Remote RealTime Data mirror)
Supports NIC / Trunking / load balance / fail over / 802.3ad
proNAS High-Availability (optional)
DHCP Server / DHCP Client
Scheduling Duplication
WINS Server
Scheduling Rsync Replication
Internet gateway
proBackup from client to NAS
Client Operating Systems Support
Support NetVaultR backup Client (by extra installation)
Microsoft® Windows® 98/ ME/ NT/ 2000 / XP / 2003 /
Support CA ARCserve (by extra installation)
Vista /2008
Support CDP ARCserve (by additional installation)
Unix / Linux
Support Mac Time machine
Mac OS
The capability of backup/restore service depends on memory resource. Pleasecontact your vendor for more detail information
Specification are subject to change without notice.
All company and product names are trademarks of their respective owners.
PROWARE TECHNOLOGY CORP.
Tel:886-2-2914-8001(Rep.) Fax:886-2-2914-7975
http://www.proware.com.tw E-mail:[email protected]
Your Storage Solutions Partner
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement