Ecom Ex-HSPA 08 ATEX Certified Hazardous Area Mobile Phone

Ecom Ex-HSPA 08 ATEX Certified Hazardous Area Mobile Phone
USER
GUIDE
SONIM XP5560
BOLT IS
(ECOM EX-HANDY 08/
EX-HSPA 08)
English
1
Copyright © 2013 Sonim Technologies, Inc.
SONIM and the Sonim logo are trademarks of Sonim
Technologies, Inc. Other company and product names
may be trademarks or registered trade-marks of the
respective owners with whom they are associated.
Disposal of Old Electrical and Electronic Equipment
The symbol of the crossed-out wheeled
bin indicates that within the countries in
the European Union, this product, and any
enhancements marked with this symbol,
can not be disposed as unsorted waste
but must be taken to separate collection at
their end- of-life.
Disposal of Battery
Please check local regulations for disposal
of batteries. The battery should never be
placed in municipal waste. Use a battery
disposal facility if available.
Guideline for Headphone and Earphone
To prevent possible hearing damage,
please do not listen at high volume levels
for long periods.
2
General Information———————— 7
Phone Models Covered
Network Services
Sonim Support Information
Use the Guide Effectively
Contents
Your Safety Guidelines———————— 9
Battery Performance
Battery Replacement
Avoid Short Circuit
Avoid High Temperatures
Battery Disposal
Personal Medical Devices
Child Safety
Emergency Calls
SAR Information
Getting Started with XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08)———————— 14
Battery Usage
Inserting the Battery (Zone 1 models)
Inserting the Battery (Zone 2 models)
Removing the Battery (Zone 1 models)
Removing the Battery (Zone 2 models)
Charging the Battery
Set Battery Alert
Your SIM Card
Inserting the SIM Card (Zone 1 models)
Removing the SIM Card (Zone 1 models)
Inserting the SIM Card (Zone 2 models)
Removing the SIM Card (Zone 2 models)
Switching On
Home Screen
Key Shortcuts in Home Screen
Keypad Functions
About Near Field Communication———————— 27
Near Field Communication
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or
Ex-HSPA 08)———————— 28
Main Menu
Main Menu Icons - without camera
Main Menu Icons - with camera
Home Screen Indicators
Key Operations without Your SIM Card
Lone Worker Monitoring———————— 33
Lone Worker Monitoring
Managing Calls———————— 34
Dial a Number
Dial an International Number
Dial a Number via Contacts
Dial a Number via the Call History
Making a PTT Call from Contacts
Managing Call History
Call Timers
Call Settings
Auto Answer
Any key Answer
Call Waiting
Caller ID
Call Forwarding
Fixed Dial
Advanced Settings
Receive a Call
Record a Call
Call Restrictions
Managing Phone Settings———————— 38
Time and Date Settings
Schedule Power On/Off Settings
Language Settings
Display Settings
Customizing Dedicated Keys
Managing Speed Dial Numbers
3
Power Saving Settings
Auto Keypad Lock
Firmeware Details
Network Selection
Data Connection
Data Account
Managing Network Settings———————— 41
Managing Security Settings———————— 42
Restore Factory Settings
Managing Connectivity———————— 44
Sending Data via Bluetooth
Receiving Data via Bluetooth
Java Settings
Data Roaming Settings
USB Function
Contents
Managing Your Files———————— 48
Managing Contacts———————— 50
Add a New Contact
View the Contact Details
Sending a Message from Contacts
Dialing a Number from Contacts
Edit the Contact Details
Delete Contact
Copy Numbers between Phone and SIM
Move Numbers between Phone and SIM
Sending Contact
Selecting Multiple Contacts
Caller Groups
Phonebook Settings
Searching Contacts
Managing Messages———————— 55
Write Message
Manage Your Messages
Drafts
Outbox
Sent Messages
Archive
Configuring Email Accounts
Write Email
Email Inbox
Email Outbox
Email Sent
Email Draft
Broadcast Messages
Templates
Message Settings
MMS Settings
Managing Profiles———————— 64
Sound Settings
Tools———————— 66
Calendar
Alarm
Calculator
Unit Converter
World Clock
Sound Recorder
Notes
Stopwatch
Text Reader
SIM Services
Applications———————— 69
Data Account and Java Settings
Installing Java Application from WAP
Installing Java Application from Memory Card
WAP Browser———————— 70
Managing Push to talk Services———————— 71
Push to talk (Optional)
Activating the PTT service
4
Contents
Login and Logout of the PTT Service
PTT Home Screen
A corporate only subscriber will be able to:
PTT Related Key Functions
PTT Display Icons
Manage PTT Settings
Managing PTT Calls
Direct PTT Calls
Calls from PTT History Tab
Calls from PTT Contacts Tab
Calls from PTT Group Tab
Sending Alerts
Block Incoming PTT Calls
Manage PTT Contact List
Manage PTT Groups
Manage PTT Favorite Contacts
Manage PTT Favorite Groups
Supervisory Override
Accessing Other Phone Features during Active PTT
Call
Vibration of Incoming voice calls
Managing Multimedia Files———————— 83
Camera (Optional)
Camera Options
Media Player
Hardcoded Shortcuts———————— 86
Using Memory Card———————— 87
Inserting Memory card into the Phone
End User License Agreement———————— 88
Our Warranty
Comprehensive 3 Year Warranty
Our Warranty
What We Will Do
Phone Care
Conditions
FCC Statement———————— 91
FCC Statement
Index———————— 93
5
6
•
Please register your phone within 30 days at www.sonimtech.com/register, to receive product information and
updates. For more information related to the warranty, please refer to “Our Warranty” on page 88.
Congratulations on the purchase of a SONIM XP5560
BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) mobile
phone. This phone is a GSM/GPRS/EDGE/UMTS enabled
handset with quad-band capabilities and has an intuitive,
feature-rich user interface, which allows you to make the
best use of the offered functions.
Phone Models Covered
This user guide only covers SONIM XP5560 BOLT IS
(ECOM Ex-Handy 08 or Ex-HSPA 08) phone models:
General Information
•
•
Ex-Handy 08 .0 –A, Ex-Handy 08 .1 –A, Ex-Handy
08 .2 –A, Ex-Handy 08 .3 –A, Ex-Handy 08 .4 –A,
Ex-Handy 08 .5 –A, Ex-Handy 08 .4 ATT, Ex-Handy
08 .5 ATT, Ex-Handy 08 .0 –E, Ex-Handy 08 .1 –E,
Ex-Handy 08 .2 –E, Ex-Handy 08 .3 –E, Ex-Handy
08 .4 –E, the Ex-Handy 08 .5 –E ( NFC Model name:
Sonim XPand NFC FCC ID: WYPB01V008AA );
Ex-HSPA 08 .0 –A, Ex-HSPA 08 .1 –A, Ex-HSPA
08 .2 –A, Ex-HSPA 08 .3 –A, Ex-HSPA 08 .4 –A,
Ex-HSPA 08 .5 –A and Ex-HSPA 08 .0 –E, Ex-HSPA
08 .1 –E, Ex-HSPA 08 .2 –E, Ex-HSPA 08 .3 –E,
Ex-HSPA 08 .4 –E, and the Ex-HSPA 08 .5 –E (
NFC Model name: Sonim XPand NFC FCC ID:
WYPB01V008AA ).
The model name can be read on the phone label under
the battery.
This phone utilizes the following 2G RF bands: GSM 850,
GSM 900, DCS 1800, PCS 1900 bands and supports the
UMTS 850, 1900 and 2100 bands or UMTS 900, 1700
and 2100 bands.
Network Services
These are additional services that you can avail through
your network service provider. To make the best of these
services, you must subscribe to them through your
service provider and obtain instructions for their use from
your service provider.
Sonim Support Information
For additional product and support information,
visit www.sonimtech.com.
Use the Guide Effectively
Familiarize yourself with the terminology and symbols
used in the guide to help you use your phone effectively.
7
HOME
SCREEN
This is the screen displayed when the
phone is in idle condition.
PRESS
Means to press and release a key
immediately. For example, Press 2
means that you press the key on
the keypad that is labelled with the
numeral 2 and the alphabets “ABC”.
General Information
SELECT
PRESS &
HOLD
Means to either press the Left or Right
Selection Key to apply the command
indicated at the bottom of the screen.
The Center navigation key can also be
used to select options. For example,
if this guide says Select Menu >
Messages > Write message, you
must press the Left Selection Key to
select Menu, scroll to Messages and
press the Left Selection Key, scroll
to Write message and press the Left
Selection Key. To return to the previous
screen, press the Right Selection Key.
Means to press and hold a key for 2
seconds before releasing the key. This
action is typically used when trying
to switch on/off the phone or when
using shortcut keys to access specific
functions. For example: press and hold
1 to access voicemail.
MENU
OPTIONS
Press Options to display menu options
on the screen. The selection keys
are used to accomplish the indicated
option.
SELECT
MENU
Means to press the Left Selection Key
to select the Menu option or press the
Menu key (centre) for the same result.
A MENU
ITEM
SUFFIXED
WITH THREE
DOTS (…)
Means more options are available but
only one has been mentioned in the
guide.
Signifies a Note.
Options Commonly Used across Menu Items
The following are common actions used across various
menu items:
BACK
Displays the previous screen. Use
the Right Selection Key to perform
this function.
CLEAR
Deletes data character by
character. Use the Right Selection
Key to perform this function.
OK
Confirms an action. Use the Left
Selection Key or the Menu key to
perform this function.
CLEAR KEY
Use this key to delete while editing
a message or delete a selected
item in a list.
BACK KEY
Use this key to display the
previous screen.
8
Please read and understand the following safety guidelines before you use the phone. These guidelines provide details
to enable you to operate your phone safely and conform to any legal requirements regarding the use of cellular phones.
Electrical interference may obstruct the use of your phone. Observe restrictions in hospitals and
near medical equipment.
Your Safety Guidelines
Switch off your cellular phone when in an aircraft. Wireless phones can cause interference or danger
to an aircraft. In an aircraft, the phone can be used in flight mode.
Do not expose the battery to high temperatures (in excess of 60°C).
Adhere to road safety laws. Do not hold/use a phone while you are driving; find a safe place to stop
first. Use hands-free microphone while you are driving.
Avoid using the phone in close proximity to personal medical devices, such as pacemakers and
hearing aids.
Use only SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) approved charging
equipment to charge your phone and avoid damage to your phone.
The symbol of the crossed-out wheeled bin indicates that this product, and any enhancements
marked with this symbol, can not be disposed as unsorted waste but must be taken to separate
collection at their end-of-life.
9
Ensure that only qualified personnel install or repair your phone.
Your Safety Guidelines
The Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) is water-proof and can be
submerged to 2 metres for 1 hour.
•
Ensure to properly close the rubber cover of the charging connector and audio connector, to
avoid deposits of water drops on these connectors, when the phone is immersed in water.
•
Water droplets may condense under the display cover if the phone is immersed in water
with significant drop in temperature. This does not indicate water leakage. The droplets will
disappear at room temperature.
The Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) is dust-resistant, rugged and
shock-resistant. However, it is not dust-proof or unbreakable if subjected to overwhelming impact.
For best results and long product life, one should protect the Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) from salt water, dust and strong impacts.
10
Your Safety Guidelines
Battery Performance
A rechargeable battery powers your device. Use the
battery only for its intended purpose. Never use any
charger or battery that is damaged. If the battery is
completely discharged, it may take a few minutes before
the charging indicator appears on the display or before
any calls can be made. The full performance of a new
battery is achieved only after three to four complete
charge and discharge cycles. The battery can be charged
and discharged hundreds of times but it will eventually
wear out. Unplug the charger from the electrical plug and
the device when not in use. Ensure that you do not leave
the fully charged battery connected to the charger for
longer time. If left unused, a fully charged battery will lose
its charge over time.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
Battery Replacement
When the talk and standby times are noticeably shorter
than normal, replace the battery with an original Sonim
battery. If a replacement battery is being used for the first
time or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger and
then disconnect and reconnect it to begin charging the
battery.
Avoid Short Circuit
Do not short-circuit the battery. An accidental shortcircuit can occur when a metallic object such as a coin,
clip, or pen causes direct connection of the positive (+)
and negative (-) terminals of the battery. (These look
like metal strips on the battery.) This might happen, for
example, when you carry a spare battery in your pocket
or purse. A short-circuit at the terminals may damage the
battery or the connecting object.
Avoid High Temperatures
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, will reduce
the capacity and lifetime of the battery. For the best
results, try to keep the battery between -20°C and +55°C
(-4°F and 131°F). A device with a hot or cold battery
may not work temporarily, even when the battery is fully
charged. Battery performance is particularly limited in
temperatures well below freezing.
Battery Disposal
Do not dispose off batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of
11
batteries according to local regulations and recycle when
possible. Do not dispose as household waste. Do not
dismantle, open or shred cells or batteries. In the event of
a battery leak, do not allow the liquid to come in contact
with the skin or eyes. In the event of leak or a hazard
seek medical help immediately.
Personal Medical Devices
Mobile phones may affect the operation of cardiac
pacemakers and other implanted equipment. Please
avoid placing the mobile phone over the pacemaker, for
example in your breast pocket. When using the mobile
phone, place it at the ear opposite the pacemaker. If a
minimum distance of 15 cm (6 inches) is kept between
the mobile phone and the pacemaker, the risk of
interference is limited. If you suspect that interference
is taking place, immediately turn off your mobile phone.
Contact your cardiologist for more information. For
other medical devices, consult your physician and the
manufacturer of the device. Comply with instructions to
switch off the device or deactivate the RF transmitter
when required, especially when posted in hospitals and
aeroplanes. Equipment used in these places may be
sensitive to radio waves emitted from the device and
adversely affect their operation.
Your Safety Guidelines
Child Safety
Do not allow children to play with your mobile phone or
its accessories. Keep it out of their reach. They could
hurt themselves or others, or could accidentally damage
the mobile phone or accessories. Your mobile phone and
its accessories may contain small parts, which could be
detached and create a choking hazard.
Emergency Calls
Mobile phones operate using radio signals, which cannot
guarantee connection under all conditions. Therefore
you should never rely solely upon any mobile phone for
essential communications (e.g. medical emergencies).
Emergency calls may not be possible in all areas, on all
cellular networks, or when certain network services and/
or mobile phone features are in use. Check with your
local service provider.
SAR Information
The Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or
Ex-HSPA 08) has been certified in compliance with
the Government’s requirements for exposure to Radio
Waves.
When communicating over the wireless network, the
mobile phone emits via the radio frequency waves low
levels of radio energy. The Specific Absorption Rate, or
SAR, is the amount of RF energy absorbed by the body
while using the phone and is expressed in watts/kilogram
(W/kg).
Governments around the world have adopted
comprehensive international safety guidelines, developed
by scientific organizations, for example, ICNIRP
(International Commission on Non-Ionizing Radiation
Protection) and IEEE (The Institute of Electrical and
Electronics Engineers Inc.). These guidelines establish
permitted levels of radio wave exposure for the general
population.
Tests for SAR are conducted using standardized methods
with the phone transmitting at its highest certified power
level in all used frequency bands.
SAR Data Information for residents in countries that
have adopted the SAR limit recommended by the
International Commission on Non-Ionizing Radiation
Protection (ICNIRP). For example, European Union,
Japan, Brazil and New Zealand.
The limit recommended by ICNIRP is 2 W/kg averaged
over ten (10) gram of tissue.
The highest SAR value for the Sonim XP5560 BOLT IS
(Ex-Handy 08 .0 –E, Ex-Handy 08 .1 –E, Ex-Handy 08 .2
–E, Ex-Handy 08 .3 –E, Ex-Handy 08 .4 –E, and the ExHandy 08 .5 –E, Ex-HSPA 08 .0 –E, Ex-HSPA 08 .1 –E,
Ex-HSPA 08 .2 –E, Ex-HSPA 08 .3 –E, Ex-HSPA 08 .4
–E, and the Ex-HSPA 08 .5 –E ) phones when tested by
Sonim for use:
•
By the ear is 0.908 W/kg (10g).
•
Worn on the body is 0.907 W/kg (10 g) provided that
the phone is used with a non-metallic accessory
with the handset at least 1.5 cm from the body, or
12
with the original Sonim accessory intended for this
phone and worn on the body.
SAR Data Information for residents in the United
States and Canada
Your Safety Guidelines
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kilogram
averaged over one gram of tissue. The standard
incorporates a margin of safety to give additional
protection for the public and to account for any variations
in measurements.
Before a phone model is available for sale to the public
in the US, it must be tested and certified by the Federal
Communications Commission (FCC) that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (that is, by the ear and worn on
the body) as required by the FCC for each model.
The highest SAR value for the Sonim XP5560 BOLT IS
(Ex-Handy 08 .0 –A, Ex-Handy 08 .1 –A, Ex-Handy 08 .2
–A, Ex-Handy 08 .3 –A, Ex-Handy 08 .4 –A, Ex-Handy
08 .5 –A, Ex-Handy 08 .4 ATT, Ex-Handy 08 .5 ATT, ExHSPA 08 .0 –A, Ex-HSPA 08 .1 –A, Ex-HSPA 08 .2 –A,
Ex-HSPA 08 .3 –A, Ex-HSPA 08 .4 –A, Ex-HSPA 08 .5 –A)
phones when tested by Sonim for use:
•
By the ear is 1.12 W/kg (1 g).
•
Worn on the body is 1.10 W/kg (1 g).
For body-worn operation, this phone meets FCC RF
exposure guidelines provided that it is used with a nonmetallic accessory with the handset at least 1.5 cm from
the body, or with the original Sonim accessory intended
for this phone and worn on the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines.
The product complies with the Canada portable RF
exposure limit set forth for an uncontrolled environment
and are safe for intended operation as described in
this manual. The further RF exposure reduction can be
achieved if the product can be kept as far as possible
from the user body or set the device to lower output
power if such function is available.
13
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
This section provides information on using your Sonim
XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
phone.
** is replaced by letters for the differentiation of
permissible versions of the battery module.
The list of items in the Sonim XP5560 phone box are:
Inserting the Battery (Zone 1 models)
•
Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or
Ex-HSPA 08) phone
•
Re-chargeable Battery
To Insert the IS battery, rotate both the IS battery screws
in an clockwise direction.You can use the screwdriver
provided to tighten the screws. Ensure not to overtighten
the screws.
•
Screw driver
•
Safety box or data Cable
•
Wall charger
•
Belt clip
•
Mini CD
Battery Usage
•
Use only a Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) certified battery that is
designed for this phone model.
•
The use of other batteries may void the warranty
terms of your phone and cause damage.
•
It is recommended to protect the battery from
extreme temperature environments and moisture.
•
Please keep the battery out of the reach of children.
WARNING
ONLY use the battery model Ex-BPH 08** or Ex-BPH
28 and the Safety Box (USB Cable) model SBH 07 with
your Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or
Ex-HSPA 08).
Inserting the Battery (Zone 2 models)
1
Unscrew Cover
To open the battery cover,
rotate both the battery cover
screws in an counter clockwise
direction (as shown in the figure).
Sometimes, the battery cover
may be tight and some extra
effort is required to open it. You
can use the screwdriver provided
to open the screws.
2
Lift Cover
Lift the back cover to reveal the
battery slot.
14
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
3
Insert Battery
Insert the battery and flush into
the battery slot such that the
three metallic contacts at the top
of the battery are aligned with
the metallic contacts within the
battery compartment.
4
step 4 of “Inserting the Battery (Zone 1 models)” on page
14 and “Inserting the Battery (Zone 2 models)” on page 14. to
close the cover.
WARNING
DO NOT remove or install your battery in your Sonim
XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
in a hazardous environment.
Charging the Battery
Close Cover
Close the battery cover. Rotate the battery
cover screws in clockwise direction. You
can use the screwdriver provided to tighten
the screws. Ensure not to overtighten the
screws.
Removing the Battery (Zone 1 models)
To open the IS battery, rotate both the IS battery screws
in an counter clockwise direction. Sometimes, the battery
cover may be tight and some extra effort is required to
open it. You can use the screwdriver provided to open the
screws.
Removing the Battery (Zone 2 models)
Follow steps 1 and 2 of “Inserting the Battery (Zone 1
models)” on page 14 and “Inserting the Battery (Zone 2
models)” on page 14..
To remove the battery, lift the cover behind the phone and
raise the upper end of the battery from the slot. Follow
The battery delivered with your mobile phone is not fully
charged. We recommend that you charge your mobile for
5 hours before you use your mobile phone for the first
time.
WARNING
DO NOT charge your Sonim XP5560 BOLT IS (ECOM
Ex-Handy 08 or Ex-HSPA 08) inside hazardous areas
and/or with anything other than the provided Safety
Box “SBH 07” (USB Cable)
Charging your Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) with a different cable/
charger and/or in a hazardous environment will
compromise the Intrinsically Safe nature of the
device.
There is a risk of explosion while charging if the
battery has been replaced by an incorrect type.
15
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
If the battery is completely out of charge, it can
take several minutes for the charging icon to
appear when the charger is connected.
1
Insert Charger
Insert the charger plug into a power outlet
2
Connect to Phone
The charger port is located on the left side
of the phone. To access the charger port,
lift the cover with the USB sign. Insert the
3.5 mm jack/connector of the charger to
the port. You can also use the standard
USB cable and adaptor to charge the
phone battery. Insert the adaptor to the
charger port of the phone. Connect one
end of the standard USB cable to the
adaptor and the other end of the USB
cable to the PC.
3
Charging Animation/Icon
If the battery is being charged when the
phone is switched off,only the battery
icon is displayed. If the battery is being
charged while the phone is switched on,
the bars in the battery charge icon on the
home screen shows animation indicating
that the battery is being charged. After
the phone is fully charged the battery bars
on the display stop scrolling. You can
disconnect the charger from the phone.
Set Battery Alert
When you set the battery alert, every time the battery
charge is low you hear an alarm. To set the battery alert
select Menu > Settings > Profiles > any profile (currently
activate in the phone) > Options > Customize > Extra
tone > Warning. Select to activate the alert.
Your SIM Card
Purchase a SIM card from a mobile operator. The SIM
card associates your network services (for example,
phone number, data services, and so on) with your
phone.
16
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Inserting the SIM Card (Zone 1 models)
1
Removing the SIM Card (Zone 1 models)
Switch Off Phone
Ensure that the phone is switched off.
2
Remove Battery
Place SIM Card
Place the SIM card by pushing it
upward in the designated slot located
under the battery.
4
Switch Off Phone
2
Remove Battery
Ensure the phone is switched off.
To open the IS battery ,rotate both the
IS battery screws in counter clockwise
direction. Sometimes, the battery
cover may be tight and some extra
effort is required to open it. You can
use the screwdriver provided to open
the screws.
3
1
Insert Battery
To Insert the IS battery, rotate both
the IS battery screws in clockwise
direction.You can use the screwdriver
provided to tighten the screws. Ensure
not to overtighten the screws.
To open the IS battery ,rotate
both the IS battery screws in
an counter clockwise direction.
Sometimes, the battery cover may
be tight and some extra effort is
required to open it. You can use
the screwdriver provided to open
the screws.
3
Remove SIM Card
4
Insert Battery
Remove the SIM card by pushing
it downward from the slot.
To Insert the IS battery, rotate
both the IS battery screws in
an clockwise direction.You can
use the screwdriver provided to
tighten the screws. Ensure not to
overtighten the screws.
17
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Removing the SIM Card (Zone 2 models)
Inserting the SIM Card (Zone 2 models)
1
Switch Off Phone
Lift Cover
Lift the battery cover and remove
the battery. For instructions refer
“Inserting the Battery (Zone 1
models)” on page 14 and “Inserting the
Battery (Zone 2 models)” on page 14..
3
Place SIM Card
Place the SIM card by pushing it
upward in the designated slot located
under the battery.
4
Switch Off Phone
2
Lift Cover
3
Remove SIM Card
4
Lock Cover
Ensure the phone is switched off.
Ensure that the phone is switched off.
2
1
Lift the battery cover and remove
the battery. For instructions refer
“Inserting the Battery (Zone 1
models)” on page 14 and “Inserting
the Battery (Zone 2 models)” on
page 14..
Remove the SIM card by pushing
it downward from the slot.
Reinsert the battery and the cover.
Lock Cover
Reinsert the battery and the cover.
Turn the battery cover screws
clockwise to lock the battery cover.
18
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Parts of the SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Phone
The Sonim XP5560 BOLT IS keypad has 11 function keys
and 12 alphanumeric keys. The left side of
the phone has one key and the right side
of the phone has three keys.
Speaker
Headset port
Charger/USB port
Display screen
19
Function keys
Alphanumeric keys
Microphone
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Parts of the SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Phone
Volume keys
Torch
Headset port
Camera
(optional)
Charger/
USB port
Loud speaker
Battery cover
screws
Battery cover
Loneworker*
alarm
(long press
to activate)
Push to talk
20
* Loneworker is
enabled in some
models of XP5560
BOLT IS.
If this feature is not
present, short press
the red button to
activate camera
(optional) and long
press will activate
torch.
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) Keypad
The following figure represents different keys in the phone key pad.
* Loneworker is
enabled in some
models of XP5560
BOLT IS.
If this feature is not
present, short press
the red button to
activate camera
(optional) and long
press will activate
torch.
Menu key
Navigation arrow keys
(Up/Down/Left/Right)
Loneworker Alarm
Long press to activate loneworker
alarm
Left Selection Key (LSK)
Clear Key
Call/Accept/Send
Press and hold to lock the keypad
Press and hold to display + (before
dialing an international number)
Right Selection Key (RSK)
Back Key
Power On/Off/End call
These keys are also used for
Loneworker*
Press and hold to turn ON/OFF
torch*
Press and hold to turn
on/off meeting mode
21
Getting Started with XXP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Switching On
Key Shortcuts in Home Screen
Press and Hold the Power ON/OFF key for 2 seconds to
Power ON the phone.
The following shortcuts can be accessed from the home
screen.
When the phone is switched on, it tries to register with
the network. After successful registration, the name of
the service provider is displayed.
Press
To Access
Menu Key
Main menu
Left Selection Key
Main menu
Right Selection Key
Contacts
Call/Accept/Send Key
All calls list
Up Arrow
Calendar
Display icons
Down Arrow
Phonebook
Battery charge
indicator
Left Arrow
My files
Right Arrow
Write messages
Home Screen
Details such as the name of the service provider, date
and time, battery charge status, and data service
connectivity are displayed when the phone is in standby
mode. Other optional indicators alarm and call forward
will be displayed, if the feature is activated.
1
8
2
7
3
6
5
4
1.
2.
3.
Service provider
4.
RSK command
5.
LSK command
6.
Date and day
7.
Time
8.
Network type and
Signal strength
indicator
The four functions that are performed using the
arrow keys are set as factory defaults,
To change these functions, select Menu >
Settings > Phone settings > Dedicated key.
Select the required arrow key and select OK.
You cannot use the arrow keys when a
notification for example: 1 missed call, is
displayed on the home screen.
22
Keypad Functions
Getting Started withXP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
The following table displays the various keys and the corresponding functions they perform:
Keypad key
Operations
POWER ON/OFF/END CALL
•
•
•
•
Press to end a call.
Press and hold to switch on or switch off the mobile phone.
Press when in Menu or Edit modes to return to Standby mode.
Press to reject an incoming call.
•
•
•
Press to answer an incoming call.
After entering a phone number, press to make a call.
Press while in Standby mode to access All calls list.
CALL/ACCEPT/SEND
LSK/RSK
CLEAR (C)
BACK
These keys are present immediately below the display screen.
• Press the Left Selection Key (LSK) or Right Selection Key (RSK) to select the
function indicated at the bottom of the screen. The indicated functions can
vary according to different program definitions.
• Press LSK to access the Menu in standby mode.
• Press RSK to access the Contacts in standby mode.
This key is present below the LSK key.
• Press this key to delete the text, while editing a message
• Long press this key to delete the complete message.
• Press this key to delete a selected item in a list.
This key is present below the RSK key. Press this key to display the previous
screen.
23
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Keypad key
Operations
MENU KEY (CENTRE)
Present at the centre of the navigation keys.
• Press while in standby mode to enter the main menu.
• Press when required to be used as a toggle key to select or clear a checkbox.
• Press to perform similar tasks as the Left Selection Key.
• Press to select the OK command.
• Press to view missed call and new message notifications.
The Left and Right Selection Keys and Power On/Off keys surround this key group. There are
arrows on the key that denote the direction to scroll for information displayed on the screen.
UP/DOWN
•
•
•
•
•
NAVIGATION KEYS
ALPHA-NUMERIC
KEYS
Press to move the cursor up or down in the text editor.
Press to view the pages in the text editor.
Press to browse menus/lists at the same level.
Press to browse the main menu.
Press to access features assigned as shortcuts.
LEFT/RIGHT
•
•
•
•
•
Press to navigate between tabs.
Press to move the cursor left or right in the text editor.
Press to browse the main menu.
Press to view the previous or next picture when previewing pictures.
Press to access features assigned as shortcuts.
•
Press the required keys to enter the desired phone number and press
to make a call.
Alternatively, enter the number and select Options > Call to dial the number.
Press and hold any numeric key to access the shortcut /speed dial number assigned,
while in standby mode.
Enter text while in the text editor.
•
•
24
Getting Started with XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
•
•
Press and hold in standby mode to access your Voice mail.
When entering text, press to enter space.
Press and hold to set access Tone settings.
Press and hold to access the Profiles.
Press and hold to set the alarm.
Press and hold to access the torch.
25
Press and hold to access the Bluetooth.
Press and hold to access the Browser.
Press and hold to access shortcuts.
Press and hold to access language list.
Getting Started withXP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
The above preset functions of number keys (from 2 to 9) can also be changed to the speed dial
functionality. For more information refer, “Managing Speed Dial Numbers” on page 39 .
•
Press and hold to display ‘+’ used for dialing an international number, while in standby
mode.
•
Press 0 in editor screen to get “.” in T9 or normal mode.
•
Press and Hold in text editor screen to get “0” in T9 and normal mode.
•
•
•
Press and hold to lock the keypad.
With backlight on, press LSK followed by this key to unlock the keypad.
When entering text, press to display special characters, for example, period, comma, and
so on. Press and hold to display the text input languages.
•
•
•
Press and hold in standby mode to switch between Meeting on/off modes.
When entering text, press to switch between lower case, upper case or numeric.
Press and hold to enable/disable T9 mode.
26
Near Field Communication
Zone 2 models of Sonim XP5560 BOLT IS (ECOM ExHSPA 08) is equipped with the NFC feature. The NFC
chipset is fixed to the battery cover. The NFC antenna
connected to the core of the phone is located in the
battery cover area where the NFC logo is printed.
Sonim XP5560 BOLT IS (ECOM Ex-HSPA 08)
is not suitable for payment solutions.
About Near Field Communication
The phone must always be powered on after
firmly closing the battery cover in order to
ensure proper functioning of the NFC.
NFC Specifications
In NFC active or reader mode, Sonim XP5560 BOLT IS
(ECOM Ex-HSPA 08) can detect the following card types:
•
Mifare
•
Felica
•
Any ISO-14444-3 compliant tag types
The reading distance ranges between 0-3 cms. When in
use the phone should be positioned within this range, for
the NFC application to function properly.
It is recommended to perform
interoperability tests before any deployments.
Sonim XP5560 BOLT IS (ECOM Ex-HSPA 08)
supports Java based applications using Contactless
Communication API 1.0 (JSR 257). Install your own NFC
based applications to make use of the NFC functionality.
27
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
This model is a bar type phone with a single LCD screen.
The graphic field of the screen is 240 (w) and 320 (h)
pixels. The TFT technology used displays 262K colours.
Main Menu Icons - with camera
1.
Calls
2.
Messages
To access the phone menu, press the Menu key. The
main menu which comprises the following 12 items
appears.
3.
Settings
4.
My Files
5.
Profiles
Main Menu Icons - without camera
6.
Browser
7.
Multimedia
8.
Applications
9.
Camera
1
Main Menu
1
2
4
3
1.
Calls
2.
Browser
3.
Messages
4.
Push to talk
5.
Multimedia
6.
My Files
7.
Settings
5
11
6 8.
9.
Profiles
Calendar
10. Applications
11. Tools
9
8
7
4
5
12
12
10
2 3
12. Phonebook
6
11
10. Connectivity
11. Tools
10
9
8
7
12. Phonebook
28
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Home Screen Indicators
The home screen indicators are visible when the phone
is in standby mode. Some icons indicate the status of
certain functions of the phone, for example, the battery
charge indicator, the network status indicator, the date
and time etc. Some icons are displayed only if the
specific service is activated.
The following table describes the display indicators on
the top bar of the home screen in the Sonim XP5560
BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08) phone.
These icons depend on the selected theme.
Some models ofXP5560 BOLT IS (ECOM Ex-Handy 08
or Ex-HSPA 08) have PTT. For information related to PTT
icons, refer “PTT Display Icons” on page 73.
Display
Name
Indicators
Description
Battery
Full green indicator
represents maximum
battery charge.
Green indicator with empty
space indicates decline in
battery charge.
Roaming
This icon is only displayed
when your phone is
registered with a non home
network.
GPRS
G icon indicates that the
phone is attached to 2G
network and GPRS feature
is available in the phone.
Boxed G icon indicates
that the phone is in active
data connection and GPRS
feature is available in the
phone.
EDGE
E icon indicates that the
phone is attached to 2G
network and EDGE feature
is available in the phone.
Boxed E icon indicates
that the phone is in active
data connection and EDGE
feature is available in the
phone.
29
3G icon indicates that the
phone is attached to 3G
packet network
Boxed 3G icon indicates
that the phone is in active
data connection in 3G
packet network.
Unread
MMS
Indicates that there are
unread MMS messages in
the inbox.
Voice
Message
Indicates a new voice
message.
Unread
e-mail
Message
Indicates a new e-mail
message.
HSPA
H icon indicates that the
phone is attached to HSPA
packet network
Boxed H icon indicates
that the phone is in active
data connection in HSPA
packet network.
Keypad
Lock
Indicates that the keypad
is locked.
Alarm
Clock
Indicates that the alarm
clock has been set.
Bluetooth
Connectivity
Indicates that bluetooth is
active.
Bluetooth
CarKit/
Headset
Connectivity
Indicates that your device
is paired and connected
to a carkit or headset with
bluetooth connectivity.
Wired
Headset
Indicates that a wired
headset is connected.
Both
Vibration
and
Ringing
Indicates that the phone
performs both vibration
and ringing.
SD Card
Indicates that SD card is
mounted on the phone.
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
3G
Stop
watch
Indicates that the
Stopwatch is running.
Call
Forward
Indicates that the
call forward function is
enabled.
Unread
Message
Indicates that there are
unread messages in the
inbox.
Unread
WAP
Push
message
Indicates that there is
a unread WAP Push
message.
30
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
2G
Indicates the signal
strength when registered to
2G network.
HSPA
Indicates the signal
strength when registered to
HSPA network.
3G
Indicates the signal
strength when registered to
3G network.
JAVA
Indicates that the Java
application is active
and is available in the
background.
Handsfree
Call
The following table describes the display indicators on
the home screen in the Sonim XP5560 BOLT IS (ECOM
Ex-Handy 08 or Ex-HSPA 08) phone:
Display
Name
Indicators
The following table describes the display indicators on
the call screen in the Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) phone:
Display
Indicators
Name
Indicates a handsfree
call.
Description
Incoming
Call
Indicates an incoming
call.
Outgoing
Call
Indicates an outgoing
call.
Missed Call
Indicates a missed call.
Description
Active Call
Indicates an active
call.
Call on Hold
Indicates a call on
hold.
Call on Mute
Indicates a call on
mute.
If Loneworker application is enabled on your phone, an
icon indicating the mode of the Lone Worker application
will be displayed.
Display
Indicators
Name
Description
Simple
Indicates simple
mode.
31
Your SONIM XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA 08)
Tracking
Indicates tracking
mode.
Man down
Indicates man down
mode.
Alarm
The following menus can be accessed on the phone
without the SIM card:
•
Indicates alarm mode.
Settings
•
Phone settings
•
AGPS settings
•
Security settings
•
Connectivity - Bluetooth
•
Restore factory settings
•
Phonebook
GPS-Red
GPS is ON but the
location information is
still not available.
This icon will be
displayed only if
Loneworker is active.
•
My files
•
Tools
•
Applications
•
Multimedia
•
Profiles
GPS-Amber
GPS is ON with
limited satellite signal
and the location
information might be
inaccurate.
This icon will be
displayed only if
Loneworker is active.
•
Calendar
•
Camera (some models)
GPS-Green
GPS is ON and the
location information is
accurate.
This icon will be
displayed only if
Loneworker is active.
Key Operations without Your SIM Card
Menus Accessible
32
10 to 15 seconds for the lone worker application to
startup and be fully operational. Please wait for 30
seconds before doing any operations on the phone.
Lone Worker Monitoring
Here are some tips to get the best performance of the
Lone Worker Monitoring feature.
Lone Worker Monitoring feature needs service
subscription to work.
Lone Worker Monitoring
1.
Please watch out for the GPS icon. If it is amber,
the accuracy is poor. If it is green, the accuracy is
OK. If it is red, it has not connected to the satellites.
It may take more time to connect to the satellites if
you are in non-ideal conditions like moving in a car
or inside buildings. Always make sure that phone
has maximum satellite view where ever possible, for
example,
•
Make sure the GPS icon is green before
starting to drive.
•
While in moving a car, always keep the phone
on the dash board.
•
Carry the phone always on the belt holster
instead of keeping it in the pocket.
•
Phone being in the vertical position gives better
GPS performance.
It is advisable to make sure that the GPS icon is
green before you get into a car and start moving.
2.
Java applications that use the Camera and Audio
recorder are incompatible with reliable lone worker
operation. Please do not use such applications.
3.
When the phone is powered on, it will take about
4.
The red button is active in all screens even
when keypad is locked. It is also active in Java
applications.
If in an alarm confirmation screen OK
and Cancel are provided, selecting
OK confirms the alarm and informs
the service provider; selecting Cancel
is used to indicate a false alarm and
no information is sent to the service
provider.
33
This section provides information on managing calls.
Making a PTT Call from Contacts
Dial a Number
On the home screen, select Menu > Phonebook. Select
the contact. Select Options > Make PTT Call.
1.
Use the numeric keys to enter the number and press
.
2.
Alternatively you can enter the desired phone
number and select Options > Call.
Managing Call History
Dial an International Number
Managing Calls
You can also view PTT contacts and groups in
Phonebook.
Press and hold the numeric key 0 till the + symbol is
displayed. Enter the Country code, Area code (without
preceding 0) and the phone number and press
or
select Options> Call.
Call history provides the call log of dialed, received and
missed call information for voice and PTT calls. PTT
IPA and missed call notifications will also be displayed.
Contacts within the call history have the following
options:
Dial a Number via Contacts
•
1.
On the home screen, select Contacts. Scroll to the
phone number.
2.
Press
to dial the number OR select Options >
Call. Press
to disconnect.
Dial a Number via the Call History
The Call History comprises separate lists for All calls,
Missed calls, Dialled calls and Received calls.
1.
To access the Call history, press
or select Menu
> Calls > Call history. All the available call history is
displayed.
2.
Select a list, scroll to the number and press
dial the number.
to
View: You can view the details of the call such
as the type of call, name, number, call time, call
duration and times of call.
•
Call: You can call the selected contact.
•
Send message: You can send an SMS/MMS to the
number. Enter the SMS/MMS and select Options to
view the send options and send it accordingly.
•
Save to Phonebook: You can save the number in
Contacts. This option is displayed only if the number
is not saved.
•
Edit before call: You can edit the number before
dialing.
•
Delete: You can delete the number from the Call
history.
•
Delete all: You can delete all the numbers from the
Call history.
34
The following options are present for PTT call history.
•
Make PTT Call: Makes PTT call to the selected
entry.
•
Send Alert: Sends IPA to selected entry.
Call Timers
•
Managing Calls
•
To view the total time spent on the last call, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Last call.
To view the total time spent on outgoing calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Dialled calls.
•
To view the total time spent on incoming calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Received calls.
•
To reset the time of all calls, select Menu > Calls >
Call history > Options > Advanced > Call timers >
Reset all.
Call Settings
Long pressing (press and hold) the Power on/
off key
during a call will only end the call
and not switch off the phone.
Call Waiting
When call waiting is enabled and the phone is in
conversation, the incoming number is displayed when
you receive a call.
1.
To enable this feature, select Menu > Calls > Call
settings > Call waiting > Activate.
2.
To cancel this feature, select Menu > Calls > Call
settings > Call waiting > Deactivate. You will notbe
prompted when you receive an incoming call while
35
your phone is busy. The caller will receive a busy
signal.
3.
To verify the call waiting status, select Menu > Calls
> Call settings > Call waiting > Query Status.
Caller ID
Auto Answer
Auto answer is enabled only if wired headset or Bluetooth
headset/carkit is connected to the phone. When auto
answer is activated, your incoming calls will automatically
be answered. Select Menu > Calls > Call settings >
Earphone auto answer > On.
Any key Answer
When enabled, you can press any key except
answer a call.
To activate this feature, select Menu > Calls > Call
settings > Any key answer > On.
to
When you make a call, you can select whether or not to
display your id to the receiver.
•
Select Menu > calls > Call settings > Caller ID >
Set by network, to allow the network operator to
define the Caller ID settings.
•
Select Menu > Calls > Call settings > Caller ID >
Hide ID, to hide your id from the receiver.
•
Select Menu > Calls > Call settings > Caller ID >
Send ID, to display the ID to the receiver.
Managing Calls
Call Forwarding
Advanced Settings
You can forward your incoming calls to a number in
the Contacts or a new number, provided your network
operator supports this service. To access call forward
settings, select Menu > Calls > Call settings > Call
Forwarding. The Call forward options are mentioned
below:
Auto Redial
Options
Function
Forward all
voice calls
Forward all incoming calls to a predesignated number. When All calls
forward is enabled, the icon
is
displayed at the top of the screen
when the phone is in standby mode.
Forward if
unreachable
Forward calls when your phone is
switched off or is out of coverage area.
Forward if
no answer
Forward calls when you do not answer
incoming calls.
Forward if
busy
Forward calls when your phone is
busy.
Forward all
data calls
Forward all data calls.
Cancel all
forwards
Deactivates the call forward option.
Fixed Dial
FDN (fixed dialing numbers) is a SIM card-enabled
feature. It restricts outgoing calls only to phone numbers
listed in the FDN list. This feature can be activated only if
PIN2 is entered. Contact your network opreator if you do
not have a PIN2.
When auto redial is enabled, your phone will
automatically redial within a set interval, if a call does not
connect.
1.
To enable this feature select Menu > Calls > Call
settings > Advanced settings > Auto redial > On.
2.
If the attempt to call is not successful, you will be
prompted with the message to redial after a specific
time. Select Abort to return to home screen.
Call Time Display
You can select Menu > Calls > Call settings >
Advanced settings > Call time display > On to activate
the call time display.
36
Call Time Reminder
When enabled, you receive a beep/tone as prompt at the
set time period during a conversation. Select Menu >
Calls > Call settings > Advanced settings > Call time
reminder > On. Select OK and set the reminder time.
You can set the reminder time between 30 to 60 seconds.
Receive a Call
1.
To receive a call, press the Accept key
press Left Selection key. Select Accept.
2.
To reject a call press the Power on/off key
press Right Selection key. Select Reject.
3.
To receive another call while you are already
speaking, enable the call waiting feature for calls.
Select Menu > Calls > Call settings > Call waiting
OR
OR
> Activate.
Restrict
outgoing
Record a Call
1.
While on call, select Options > Sound recorder.
2.
Select Stop to stop the recording. Save the record.
3.
The recorded file is saved in the location My files >
Phone (or Memory card) > Audio.
Depending on the settings, the storage location can be
phone or memory card.
Managing Calls
Call Restrictions
You can restrict incoming and outgoing calls using Call
restrictions options.
Select Menu > Calls > Calling restrictions. You can
choose from the following options.
Options
Function
Restrict
incoming
•
Allow all - allows all incoming calls
•
Allow contacts - allows calls from
numbers in the phonebook contact
list.
•
Block reject - list - blocks
incoming calls from numbers in the
call reject list
•
Block all - blocks all incoming
calls.
Manage
reject list
•
Allow all - allows all outgoing calls
•
Allow contacts - allows outgoing
calls restricted only to numbers in
the phonebook contact list.
•
Block all - blocks all outgoing
calls.
To add a new number to the reject list, select Enter number > enter the
number and select Done.
Click Options to perform the following
commands:
Edit number - modify the selected
phone number.
Delete number - delete the selected
phone number
Delete all numbers - delete all the
phone numbers present in the reject list.
To enable password protection for call
restrictions setting, you must activate
Safeguard feature and choose Restrict calls
under settings. For more information refer
“Safeguard” on page 42.
37
This section provides information on the various settings
for the phone. To access, select Menu > Settings >
Phone settings.
Disable to disable this feature.
Time and Date Settings
You can change the phone’s interaction language by
selecting your preferred language.
Managing Phone Settings
You can set and display the date and time on the phone.
You can also select the display format.
Language Settings
•
•
Set home city: To set the home city, select Phone
settings > Time and date > Set home city.
To set the language based on the SIM card, select
Phone settings > Language > Automatic.
•
•
Set time/date: To set the date and time, select
Phone settings > Time and date > Set time/date.
To set the language to English, select Phone
settings > Language > English.
•
•
Set format: To set date and time format, select
Phone settings > Time and date > Set format.
To set the language to Spanish, select Phone
settings > Language > Espanol.
•
The date formats supported are DD MM YYYY ,
MM DD YYYY, YYYY MM DD with the different
date separators.
•
The time formats supported are 24 hr. and 12
hr.
•
Update with time zone: To update the time
automatically, when the time zone (home city) is
changed, select Phone settings > Time and date >
Update with time zone > select On.
•
Auto Update time: To synchronize the time and
date with the network details, select Phone settings
> Time and date > Auto update time > On. This
feature requires network support.
Schedule Power On/Off Settings
To enable this feature, select Phone settings > Schedule
Power on/off > Select the time > Status > Enable and
Power on/off. Select the time after which the phone
should be automatically switched on. Select OK. Select
All the menu items, user feedback messages and text
entry language are displayed in the language set based
on the SIM card.
Display Settings
You can activate and modify the display settings. Select
Phone settings > Display.
1.
Wallpaper: Allows you to set the background screen
display using the embedded pictures available in
your phone or from your own pictures that you have
downloaded on to your phone or memory card. The
selected wallpaper is displayed on the home screen.
2.
Screensaver: Select this to make the screen saver
appear on the home screen. User can select the
screensaver image.
3.
Show date and time: Select this to display date and
time on the home screen.
4.
Themes: Allows you to set the color theme and
icons for the main menu and other screens. There
38
are two themes available. Select Theme 1 or Theme
2. Select Options to activate the selected theme,
update the theme automatically after set time
period, and set the theme display order.
Customizing Dedicated Keys
Managing Phone Settings
Dedicated keys are the navigation keys set to access
specific functions. To assign specific function to the keys,
select Menu > Settings > Phone settings > Dedicated
key > Select a key > press center key > select the new
function > select OK. You can also change the specific
function previously assigned to the key.
When pre-defined functions are activated,
speed dial numbers will be disabled.
Managing Speed Dial Numbers
This option enables you to dial a number quickly via a
shortcut.
1.
Select Menu > Settings > Phone settings >
Dedicated key > Speed dial. Select Status > On.
The shortcut is set.
2.
To add a new contact, select Set numbers. Select
the number key (from 2 to 9) to which you want to
assign the speed dial. Select the contact from the
phonebook and save. The Speed dial is set.
3.
To make a call, press and hold the shortcut
designated number key for Speed dial while on
home screen.
When speed dial is activated, pre-defined
functions set using Dedicated keys will be
disabled.
Power Saving Settings
You can set the backlight level and duration. Select Menu
> Settings > Phone settings > Power saving > LCD
backlight. Select the brightness level for the backlight
of the screen. The screen display is active for the period
chosen by you. The screen display active time can be
selected between 5-60 sec.
Auto Keypad Lock
To lock the keypad automatically, when the phone is in
idle state, select Menu > Settings > Phone settings
> Auto keypad lock. Select the time after which the
keypad will be automatically locked. Select None to
disable this feature.
Firmeware Details
To view the firmware version and IMEI number, select
Menu > Settings >Phone settings > Firmware details.
39
Network Selection
To modify the network access settings, select Menu >
Settings > Network settings > Network selection. The
following network settings are displayed:
You can select your network, specify the network
account, and indicate whether GPRS is required at all
times.
Managing Phone Settings
•
New search: Search the network for the phone
to connect when you are selecting the network
manually.
You can add, view, edit and delete the accounts. You can
edit the following information in the accounts: Account
Name, APN, Username, Password, Authentication type,
Advanced settings, MMSC/Homepage , Connection
type, Use proxy, Proxy address, Proxy port, Proxy user
name, Proxy password, Primary DNS, Secondary DNS, IP
Address, and Subnet mask.Make the changes and select
OK. Then Add new packet data account will pop up,
select Yes.
Service Selection
•
Select Network: Select the network
automatically or you can do it manually.
In service selection user can Set GSM/WCDMA/
Automatic mode.
•
Selection Mode: Select Automatic to set the
phone to automatically select a cellular network
available in your area, or select Manual to set
the network manually. If manual mode is set,
the user has to invoke Select Network to do
network selection.
AGPS Settings
Data Connection
To set registration preferences for accessing data
connection, select one of the following options:
•
Always - Register with the data connection,
continuously.
•
When needed - Register only when data transfer is
required.
Data Account
You can set the network account and view the data
connection information.
Your handset is equipped with a GPS receiver, that
supports AGPS (Assisted GPS) functionality. This helps to
calculate your current location. When an user accesses
40
an application that requires GPS, then the receiver is
turned on automatically. After the application is closed, it
is turned off automatically.
A GPS receiver calculates its current location by
monitoring broadcast signals from GPS satellites. Hence
it is important that the handset is exposed to the sky.
AGPS feature helps the GPS receiver to acquire certain
information through data connection and/or network
messages. This information is used during the position
calculation process. This significantly increases the ability
to calculate position at low signals. It also speeds up
the time required to calculate the position. Please note
that some AGPS features could be network dependent.
In some cases, AGPS uses external data connectivity,
which may result in network charges.
Managing Network Settings
To configure the AGPS on your phone, do the following:
1.
Select Menu > Settings > AGPS settings.
2.
Select AGPS profiles and then press Select. In
AGPS profiles, select the required profile and click
Options > Activate. You can also select Edit. Enter
the name, address, data account, port, and TLS as
provided by the service provider or operator.
3.
Select Done to save the settings.
41
To prevent unauthorized use of your phone, you can set
the PIN protection.
PIN Protection
you can activate PIN protection, to prevent unauthorized
use of your phone. The PIN is operator dependent.
To enable PIN protection,
Select Menu > Settings > Security settings > PIN
protection > On. Input PIN message pops up. Enter
the PIN. Select OK. After this is set, every time you
power on the phone, you will be requested to enter
the PIN. If the PIN code is wrong you cannot access
the phone.
Change PIN
Managing Security Settings
•
To change the PIN code select Menu > Settings >
Security settings > Change PIN. You can change codes
for PIN.
Change PIN2
> Phone lock. Enter the default phone lock password, to
lock the phone. Enter the password again to unlock the
phone.
The default password for phonelock is 1234.
If the phone lock is enabled, you will be requested
to enter the password, when ever you power on the
phone. To change the phonelock password, select
Menu > Settings > Security settings > Change phone
lock password. Enter the old password and the new
password and select OK.
Safeguard
You can set a password and prevent unauthorized usage
of messages, phonebook, call history,my files,keypad
and restrict calls of your phone. To use this application,
do the following:
1.
Select Menu > Settings > Security settings >
Safeguard > Settings > On. Input password
message pops up. Enter the password. Select OK.
After this is set, everytime the particular option
for which safeguard set is accessed, you will be
requested to enter the password. If the password is
wrong you cannot access the phone.
2.
To activate the safeguard protection for accessing
the messages, phonebook, call history, my files,
keypad, restrict calls, options in your phone, select
Menu > Settings > Security settings > Safeguard
> On. Select Activation and select the required
option to be protected.
3.
To change the safeguard password, select Menu
> Settings > Security settings > Safeguard >
Change password. Enter the old password and
To change the PIN code,
1.
Enable PIN2 before changing it. To enable PIN2,
select Menu > Calls > Call settings > Fixed dial >
Mode > ON.
2.
To change PIN2, select Menu > Settings > Security
settings > Change PIN2. You can change codes for
PIN2.
Phonelock Mode
In the phonelock mode, the phone can be unlocked
only by entering a password. To enter the phonelock
password, select Menu > Settings > Security settings
42
the new password. Re-enter the new password for
confirmation and select OK.
The default password for safeguard is 1234.
Certificate Manager
Managing Security Settings
You can view, edit key usages, and delete authorized
certificates and user certificates.
Restore Factory Settings
Select to reset the settings to the original factory settings.
Please note that this can remove changes you have made
to your settings.
To restore the factory settings, Select Menu > Settings >
Restore factory settings > Restore factory settings >
Input phone password.
The default password for restoring factory
settings is 1234 or your phonelock password if
it is changed.
43
You can access Bluetooth and data accounts.
3.
Enter a passcode (for example, 0000). The same
passcode must be entered for the other device also.
Bluetooth
4.
Select OK.
Bluetooth is a wireless connection that enables to
connect devices within short range, to exchange
information.
5.
When the other device accepts your request
the message Allow this device to connect
automatically? is displayed with options Yes and
No.
If you select Yes, the other device can send any file
via bluetooth without your confirmation.
Managing Connectivity
The Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or
Ex-HSPA 08) is compliant with Bluetooth specification BT
3.0 supporting the following profiles: SPP, SAP, HFP, HSP,
A2DP, AVRCP, DUN, PBAP, OPP, and FTP. This device can
send images and audio files using Bluetooth connection.
There may be restrictions on using Bluetooth
technology in some locations. Check with your
local authorities or service providers.
Activate Bluetooth
Select Menu > Settings > Connectivity > Bluetooth >
Power > On. Use the Menu key to toggle between on
and off. When Bluetooth is activated, the Bluetooth icon
is displayed on the home screen.
Deactivate Bluetooth
Select Menu > Settings > Connectivity > Bluetooth >
Power > Off. Use the Menu key to toggle between on
and off.
Pairing Devices
Pairing with Bluetooth Devices of Version V2.0 and below
1.
Select Menu > Settings > Connectivity >
Bluetooth > Search new device.
2.
Select the device of your choice. Select Pair.
If you select No, the other device cannot send a file
without your confirmation.
6.
Select Yes/No to enable/disable automatic connect
in future.
7.
When the other device rejects your request the
message Pairing Failed is displayed on the screen.
Pairing with Bluetooth Devices of Version V2.1 and
above
1.
Select Menu > Settings > Connectivity >
Bluetooth > Search new device.
2.
Select the device of your choice. Select Pair.
Passcode matched? message pops up while
pairing
3.
Select OK.
4.
When the other device accepts your request
the message Allow this device to connect
automatically? is displayed with options Yes and
No.
5.
Select Yes/No to enable/disable automatic connect
in future.
44
6.
When the other device rejects your request the
message Pairing Failed is displayed on the screen.
Prior to pairing the devices, ensure that the
visibility settings for the pairing devices are
activated. To activate the visibility settings,
select Menu > Settings > Connectivity >
Bluetooth > Settings > Visibility > On.
Managing Connectivity
Do not pair with an unknown device for
security reasons.
Connecting a Bluetooth Headset
You can connect a bluetooth headset after pairing it with
your phone.
1.
Rename Paired Device
1.
Select Menu > Settings > Connectivity >
Bluetooth > My device.
2.
Select the paired device.
3.
Select Options > Rename.
4.
Enter the new name.
5. Select OK.
Delete Paired Device
1.
Select Menu > Settings > Connectivity >
Bluetooth > My device.
2.
Select the paired device.
3.
Select Options > Delete.
Select Menu > Settings > Connectivity >
Bluetooth > My device.
2.
Select the paired Bluetooth headset.
3.
Select Options > Connect.
When the connection is successful to the paired
device the message Handsfree Connected is
displayed on the screen.
When the connection is unsuccessful to the paired
device the message Connection failed is displayed
on the screen.
For more details, refer the user manual of the
Bluetooth headset.
45
If you cancel the pairing with a device that
is connected, pairing is removed and the
connection is switched off immediately.
Bluetooth Settings
1.
Select Menu > Settings > Connectivity >
Bluetooth > Settings.
2.
Edit the following details.
Options
Description
Visibility
Select On to show your presence
to other devices. Select Off to hide
your presence from other devices.
Managing Connectivity
4.
Select the paired device to which you want to send
the file.
My name
Select this option to change the
name of your device.
Storage
Select the storage location.
Remote SIM
Mode
Select this option to access the
SIM card inserted in your phone
using Bluetooth car kit.
Sharing
Permission
Select this option to provide full
control or read-only permission to
the other device connected to your
device.
5.
When the other device accepts your file, the
message Done is displayed on the screen.
6.
When the other device rejects the file, the message
Unfinished is displayed on the screen.
Add +
Enable this option to add ”+”
automatically when we dial to a
Phonebook contact from Carkit.
This is Specific requirement for
Ecom for Bury CC9060 carkit.
Receiving Data via Bluetooth
About
You can view the device name, address and other
support services.
Sending Data via Bluetooth
You can transfer files to another compatible device.
1.
Select Menu > My files.
2.
To send an image file, select Images > select the file
OR To send an audio file, select Audio > select the
file OR To send any other file, select Others > select
the file.
3.
Select Options > Send > via Bluetooth.
My devices screen displays the paired
devices. To send a data to an unpaired
device, select Search new device. Select
the unpaired device of your choice. Enter the
passcode when you are asked to enter.
To receive data using Bluetooth, your device should be
Bluetooth activated and must be visible to other devices.
1.
When you receive a data, you are asked if you want
to accept it.
2.
Select Accept to receive data OR select Reject to
refuse the data.
3.
If you accept, the data will be stored in My files >
Images or Audio or Others.
Confirmation is required only if Authorize
option is set to Always Ask (Menu > Settings
> Connectivity > Bluetooth > My device>
Select the device >Options > Authorize) .
If Authorize is set to Always connect, user
confirmation is not asked when receiving data
from other bluetooth device.
Data Account
46
You can set the Network account and view the data
connection information.
Managing Connectivity
To set the data account, select Menu > Settings >
Connectivity > Data account and create a new data
account.
You can add, view, edit and delete the accounts. You can
edit the following information in the accounts: Account
Name, APN, Username, Password, Authentication type,
Advanced settings, MMSC/Homepage , Connection
type, Use proxy, Proxy address, Proxy port, Proxy user
name, Proxy password, Primary DNS, Secondary DNS, IP
Address, and Subnet mask.Make the changes and select
OK. Then Add new packet data account will pop up,
select Yes.
Java Settings
To use the applications requiring internet service, Java
settings must be set.
Select Menu > Settings > Connectivity > Java Settings.
Select the required data account and save.
Data Roaming Settings
Data roaming option enables/disables the usage of data
service during roaming.
Select Menu > Settings > Connectivity > Data
Roaming.
USB Function
Phone can be connected to PC as a Mass storage
using USB cable. When the phone is connected to the
computer via a USB cable, the following two options are
displayed:
•
Mass storage: Select this to use your phone as
mass storage device to transfer and synchronize
data between the Sonim XP5560 BOLT IS (ECOM
Ex-Handy 08 or Ex-HSPA 08) phone and your
computer.
•
COM port: Select this to use the phone with
PC-Sync software.
When the phone is connected to the computer
via USB cable, you can select only to charge
the phone by pressing the Back button. You
need not select the Mass storage or COM port
option.
When the phone is connected to the computer
via USB cable in Mass Storage mode and the
memory card is also present in the phone,
the memory card and the phone memory
are displayed as two separate drives in the
computer.
When the phone is connected to the computer
as mass storage, you cannot access the My
files menu in the phone. To access the My
files menu, disconnect the phone from the
computer and reconnect in COM port mode.
47
Using the My files, you can store and manage audio,
video files, image files, .jar files, .jad files and .txt files.
You can preview the files, view their details and delete
files. The internal storage capacity is approximately 99
MB.
1.
To view your files select Menu > My files > select
Phone/Memory card > Options > Open.
2.
Scroll to a category and select one of the categories
: Audio, Images, Java, Others or Videos and select
OK.
Managing Your Files
3.
4.
5.
For pictures, select the images stored in the Phone
memory/memory card.
For sounds, select the audio files stored in the
Phone memory/memory card.
Scroll to file from the displayed list and select
Options to display further options.
For an image file, the following options are present.
Options
Function
View
View the image in full screen mode.
Edit
Resize the image or edit the image to
add photo effects, adjust contrast and
brightness, flip and rotate the images.
Send
Send the image to any phone as a
multimedia message, E-mail or via
Bluetooth.
Use as
Use the image as wallpaper, screen saver,
power On/Off display and caller picture.
New
folder
Create a new folder.
Rename
Rename the image.
Delete
Delete the image.
Sort by
Sort the images by name, type, time, and
size.
Mark
several
Select all the images or select one by one.
Copy
Copy a file to different folder.
Move
Move a file to different folder.
Delete all
files
Delete all the images.
Details
View the creation date, size, and copyright
details of the file.
Edit option will not be present for some
images.
For an audio file, the following options are present.
Options
Function
Play
Play the audio file.
Send
Send the audio file to any phone as
multimedia message, as an E-mail, or via
Bluetooth.
48
Managing Your Files
Use as
Use the audio as ring tone for incoming
call.
New
folder
Create a new folder.
Rename
Rename a file.
Delete
Delete the audio file.
Sort by
Sort the audio files by name, type, time,
or size.
Mark
several
Select all the audio files or select one by
one.
Copy
You can copy a file to different folder.
Move
You can move a file to different folder.
Delete all
files
You can delete all the audio files.
Details
You can view the creation date, size, and
copyright details of the file.
49
You can use the phonebook to maintain phone numbers
of your contacts. This feature enables you to add, delete,
dial phone numbers, send SMS and MMS messages. To
access the contacts, select Menu > Phonebook. The
contacts are displayed.
You can also use the volume keys to scroll
through the contacts.
Add a New Contact
Managing Contacts
•
•
•
To add a new contact, select Menu > Phonebook >
Options > Add new contact. Select SIM or phone
and enter the name and phone number. Press Menu
key to save and select Save.
Alternatively, you can directly enter a number and
select Options > Save to Phonebook > Add new
contact. Select SIM or phone and enter the name
and phone number. Press Menu key to save and
select Save.
You can also add a contact from Call history
(refer “Managing Call History” on page 34) and Write
message menu (refer “Write Message” on page 55).
The new number is updated in the Contacts list.
If Phone is selected as the storage location,
then the user can add many details apart from
the name and phone number. The user can
add a maximum of 1000 contacts.
View the Contact Details
On the home screen, select Menu > Phonebook. Select
the contact. Select Options > View or press the Menu
key.
Sending a Message from Contacts
You can send SMS and MMS messages to the contacts.
Sending SMS
1.
On the home screen, select Menu > Phonebook.
Select the contact.
2.
Select Options > Send message.
3.
Enter the message and select Options > Send to.
Select additional recipients, if any.
4. Select Options > Send, to send the message.
Sending MMS
1.
On the home screen, select Menu > Phonebook.
Select the contact.
2.
Select Options > Send message > Options >
Switch to MMS.
3.
Enter the message and select Options. You can
add the required picture, sound, video, subject, and
slides to the message. Select the required file.
4.
Select Options > Send to. Select additional
recipients, if any.
5.
Select Options > Send, to send the message.
Dialing a Number from Contacts
On the home screen, select Menu > Phonebook. Select
the contact. Select Options > Call or press the call key.
50
Edit the Contact Details
Sending Contact
You can enter or edit the contact details. On the home
screen, select Menu > Phonebook. Select the contact.
Select Options > Edit.
You can send contact information by SMS, MMS, e-mail
or Bluetooth.
Send Contact by SMS
Delete Contact
To delete a contact, select Menu > Phonebook. Select
the contact and select Options > Delete > A message
appears Delete? Select Yes to delete.
Managing Contacts
Copy Numbers between Phone and SIM
•
To copy a selected number from SIM card to Phone
memory, select Menu > Phonebook > Options>
Copy > To phone. Select OK.
•
To copy a selected number from Phone memory to
SIM card, select Menu > Phonebook > Options >
Copy > To SIM. Select OK.
•
To copy a selected number from SIM card or Phone
memory to a file, select Menu > Phonebook >
Options > Copy > To file. Select OK.
Move Numbers between Phone and SIM
To move a selected number from SIM card to Phone
memory or Phone memory to SIM card, select Menu
> Phonebook > Options > Move. Select OK. Moved
records are deleted from the source location.
When the contact details are moved from
Phone to SIM, only the contact name and
mobile number is saved in the SIM card.
1.
Select Menu > Phonebook. Select the contact.
2.
Select Options > Send business card > As text
message. Select additional recipients, if any.
Select Options > Send to send the contact
information.
Send Contact by MMS
3.
1.
Select Menu > Phonebook. Select the contact.
2.
Select Options> Send business card > As MMS.
3.
Enter the message and select Options. You can
add the required picture, sound, video, subject, and
slides to the message. Select the required file.
4.
Select Options > Send to. Select additional
recipients, if any.
Select Options > Send, to send the contact
information.
Send Contact by e-mail
5.
1.
Select Menu > Phonebook. Select the contact.
2.
Select Options > Send business card > As Email.
Enter the following details:
•
To: You can enter the recipient’s e-mail
address.
51
•
•
Managing Contacts
6.
BCC: You can enter the e-mail address of the
recipient, to whom a blind copy of the e-mail
has to be sent.
Selecting Multiple Contacts
•
Subject: You can enter the subject of the
e-mail.
•
Attachments: By default the selected contact
details are attached. You can also include other
attachments, if any.
•
3.
CC: You can enter the e-mail address of the
recipient, to whom a copy of the e-mail has to
be sent.
Priority: You can set the priority for the
message.
Select Done > A message appears displaying
the size of the message > Select Yes to send the
message.
You will not be able to send the contact by
e-mail, if e-mail account is not configured.
To configure the e-mail account, refer Refer
“Configuring Email Accounts” on page 60.
Send Contact by Bluetooth
device and then select the device.
When the other device accepts the contact, Done
message will be displayed.
To select multiple contacts, select Menu > Phonebook >
Options > Mark several. To select the contacts, scroll to
the required contacts and do one of the following:
•
Select Options > Mark.
•
Press the Menu key.
•
Select Options > Mark all to select all the contacts
in the phonebook. Once the contacts are marked,
the following options are displayed:
Options
Function
Unmark
Unmark the selected contact.
Send message
Send an SMS/MMS message to
all the marked contacts.
Send business
card
Send a business card to the
marked contacts
1.
Select Menu > Phonebook. Select the contact.
Backup contacts
2.
Select Options > Send business card > Via
Bluetooth.
Export the contact details of the
marked contacts as UDX file.
Delete marked
Delete all the selected contacts.
3.
If Bluetooth is not on, the user will get a prompt to
turn it on.
Mark all
4.
Select the paired device to which you want to send
the name card.
Select all the contacts in the
phonebook. This option is
displayed only if all the contacts
are not selected.
5.
If the device is not paired, select Search new
52
Unmark all
Unmark all the selected
contacts. This option is
displayed only if all the contacts
are marked.
Caller Groups
You can create a new group, add a new contact to the
group, and manage the groups.
Managing Contacts
•
•
To create a new group, select Menu > Phonebook
> Options > Caller groups > Add new group. You
can assign a name, ringtone and picture for the
group.
To add a new contact in a group, select Menu >
Phonebook. Select the contact. Select Options >
Caller groups. Select a group. Select Options >
View members > Options > Add members. The
phonebook is displayed. Select the phone numbers
to be added to the group.
Function
View members
You can view the contacts
in the group.
Delete
You can delete the group.
Send message
You can send an SMS/
MMS message to the
contacts in the group.
Group settings
You can rename the group,
assign a ring tone to the
group, and add a picture to
the group.
To view or define settings for your phonebook, select
Menu > Phonebook > Options > Phonebook settings.
•
•
To manage a group, select Menu > Phonebook >
Options > Caller groups. Select a group and then
select Options. The following options are displayed.
Options
You can delete all the
groups.
Phonebook Settings
Only the contacts stored in phone memory can
be added to the group.
•
Delete all
•
Preferred storage: You can select either SIM or
Phone or both as the default memory location to
store the contacts.
My number: You can manage your own information.
The following sub-menus are present.
•
Edit my number: Enter your name and other
personal details such as Mobile number, Home
number, Company name, Email address, Office
number, and Fax number. Select OK and Save.
•
Send my number: You can send your
information to any number via SMS, MMS,
e-mail and bluetooth.
•
Delete: Delete the contact information.
Extra Numbers: You can view some special
purpose phone numbers. The following sub-menus
are present.
•
Owner numbers: Contains the number and
53
name of the owner. You can edit or delete the
information.
Managing Contacts
•
Service numbers: Contains the service
numbers provided by the operator.
•
Memory status: You can view the number of
contacts stored in the SIM and mobile phone.
•
Copy contacts: You can copy all the selected
records from SIM card to phone memory and from
phone memory to SIM card.
•
Move contacts: You can move all the selected
records from SIM card to phone memory and from
phone memory to SIM card.
•
Delete all contacts: You can delete all the contact
records stored in the SIM card and phone memory.
Searching Contacts
1.
Select Menu > Phonebook.
2.
Type the contact name.
3.
The contact will be displayed.
54
SMS and MMS are convenient and inexpensive means
of communication. You can send a text message to
other people via SMS service. MMS allows you to send
messages by including multimedia content such as
pictures, audio files, video files, and so on.
You can use the Messages in your phone to send an
SMS and MMS message to other mobile phones or any
other equipment that can receive SMS and MMS.
Managing Messages
The MMS feature is available only if you
subscribe it from your network operator.
To access the messages function select Menu >
Messages. The list of options are displayed.
Write Message
Options
Function
Send to
You can select recipients for
the message. You can enter a
new number or select from the
Phonebook.
Insert
symbol
You can select the required symbol
to include in the message.
Input
Method
Options
You can set the input options to
T9, add a new T9 word or enable
auto completion and alphabetic
prediction under Advanced
Settings.
Edit
options
You can mark the required text of
a message, select Copy all to copy
the complete text or Cut all to cut
the complete message and paste
at a desired location.
You can create SMS and MMS messages.
SMS Messages
Add
picture
You can add a picture to the
message. You can also take new
picture with the camera (optional).
Enter the message in the text pane. The text input
mode is displayed at the top left of the screen. Press
and release # to select the appropriate text input
mode.
Add
sound
You can add a sound to the
message. You can also record a
new sound using a sound recorder
and save it in the folder.
Enter the message and select Options. The
following options are present:
Add video
You can add a video to the
message. You can also record new
video with Camera (optional).
Add
subject
You can add a subject to the
message.
1.
To create a SMS message select Menu > Messages
> Write message.
2.
3.
When you add a multimedia attachment,
the message is automatically converted
to a multimedia message. MMS charges
will apply, based on the operator.
55
Managing Messages
Slide
options
You can set to display a slide either
behind or before the message and
set the slide display timings.
Switch to
MMS
You can switch to MMS and send
the message as a MMS.
Advanced
You can use a message template
stored in Templates folder.
You can attach a file, contact
details, and insert bookmarks.
mode.
3.
Enter the message and select Options. The
following options are present:
For sending multimedia messages,
different charges will apply, based on the
operator.
Options
Function
Send to
You can select recipients for the
message. You can enter a new number or
select from the Phonebook.
Save to
drafts
You can save the message as a
draft in Draft folder.
Save as
template
You can save the message as a
template in Templates folder.
Insert
symbol
You can select the required symbol to
include in the message.
Details
You can view the details of the
message such as message type,
subject, size, number of recipients,
and attachment list.
Input
Method
Options
You can set the input options to T9, add
a new T9 word or enable auto completion
and alphabetic prediction under
Advanced Settings.
Edit
options
You can mark the required text of a
message, select Copy all to copy the
complete text or Cut all to cut the
complete message and paste at a
desired location.
Add
picture
You can add a picture to the message.
You can also take new picture with the
camera (optional).
Add
sound
You can add a sound to the message.
You can also record a new sound using a
sound recorder and save it in the folder.
4.
Select Send to and select the recipients of the
message.
5.
Select Options > Send, to send the message.
Instead of selecting Options, press the Menu
key to quickly send the message to a number
in Phonebook.
MMS Messages
1.
To write a MMS message select Menu > Messages
> Write message.
2.
Enter the message in the text pane. The text input
mode is displayed at the top left of the screen. Press
and release # to select the appropriate text input
56
Managing Messages
Add video
You can add a video to the message. You
can also record new video with Camera
(optional).
Manage Your Messages
The inbox, draft, outbox and sent folders display the
number of stored messages in parenthesis.
Add
subject
You can add a subject to the message.
Preview
MMS
You can preview the message before
sending.
The Inbox stores and displays all the incoming SMS and
MMS messages.
Slide
options
You can set to display a slide either
behind or before the message and set the
slide display timings.
To access the Inbox, select Menu > Messages > Inbox.
The Inbox displays a list of messages.
Advanced
You can use a message template stored
in Templates folder.
You can attach a file, contact details, and
insert bookmarks.
Inbox
1.
Scroll to a message and select Options to view the
following list of options.
•
View: You can view the message.
•
Reply: You can send a text or multimedia
message to the sender of that message.
Save to
drafts
You can save the message as a draft in
Draft folder.
•
Call sender: You can call the sender of the
message.
Save as
template
You can save the message as a template
in Templates folder.
•
Forward: You can send the message to
another recipient.
Details
You can view the details of the message
such as message type, subject, size,
number of recipients, and attachment list.
•
Delete: You can delete the message.
•
Delete all: You can delete all the messages.
4.
Select Options > Send to and select the recipients
of the message.
•
Save to Phonebook: You can save the
numbers to the phonebook.
5.
Select Options > Send, to send the message.
•
Sort by: You can sort the messages based on
Sender, Subject, unread/read, Message size
and Message type.
•
Move to Archive: You can move the selected
message to archive.
•
Mark several: You can select multiple
messages, one by one.
Instead of selecting Options, press the Menu
key to quickly send the message to a number in
Phonebook.
57
Managing Messages
•
Mark as unread: You can mark a message as
unread.
•
Delete: You can delete the message.
•
Advanced: You can copy and move messages
from the phone memory to SIM card or from
SIM card to phone memory.
•
Delete all: You can delete all the messages.
•
•
Details: You can view the details of the
message such as from, message type, received
date and storage for SMS messages and from,
to, cc, Number of recipients, subject, priority,
type received date, size and storage for MMS
messages.
Sort by: You can sort the messages based on
Sender, Subject, unread/read, Message size
and Message type.
•
Mark several: You can select multiple
messages, one by one.
•
Advanced: You can copy and move messages
from phone memory to SIM card or from SIM
card to phone memory.
•
Details: You can view the details of the
multimedia or e-mail message.
2.
To open a message, scroll to a message and press
the Menu key.
3.
After a message is opened other functions can
be performed. Select Options to list the following
options: Reply, Call sender, Forward, Delete, Edit
options, Save as Template, Save to Phonebook,
Details and also other Advanced options to use
the number, URL, e-mail, USSD, copy or move the
messages from phone memory to SIM card or from
SIM card to phone memory.
Drafts
Messages that have been saved to be sent later are
stored in Draft.
1.
2.
To access unsent messages, select Menu >
Messages > Drafts.
Select Options to view the following list of options.
•
View: You can view the message.
•
Send: You can send the message.
•
Edit: You can edit the message.
3.
Press the Menu key to view the message.
4.
Select Options > Send to send the message.
58
Outbox
Messages that were undelivered to the recipient due to
some reason are stored in Outbox.
1.
To access undelivered messages, select Menu >
Messages > Outbox.
2.
Select Options to view the following list of options.
•
View: You can view the message.
•
Resend: You can resend the message.
•
Edit: You can edit the message.
•
Delete: You can delete the message.
•
Delete all: You can delete all the messages.
•
Sort by: You can sort the messages based on
Receipient, Subject, unread/read, Message size
Managing Messages
and Message type.
•
•
Mark several: You can select multiple
messages, one by one.
Advanced: You can copy and move messages
to the phone memory.
•
•
Advanced: You can copy and move messages
from phone memory to SIM card or from SIM
card to phone memory.
Details: You can view the details of the
message such as message type, subject, size,
number of recipients, and attachment list.
•
Details: You can view the details of the
multimedia or e-mail message.
3.
Press the Menu key to view the message.
4.
Press Options > Resend to send the message.
3.
Press the Menu key to view the message.
The SMS messages are saved in Sent
messages , only if it is activated in Messages >
Message settings >Text message > Common
settings > Save sent message.
The MMS messages are saved in Sent
messages, only if it is activated in Messages >
Message settings > Multimedia message >
Common settings > Sending > Enable Send
and save option.
Sent Messages
Messages that have been sent and delivered are stored
in Sent.
1.
To access sent messages, select Menu >
Messages > Sent.
2.
Select Options to view the following list of options.
•
View: You can view the message.
•
Forward: You can send the message to
another recipient.
•
Delete: You can delete the message.
•
Delete all: You can delete all the messages.
•
Sort by: You can sort the messages based on
Subject, Message size and Message type.
•
Move to Archive: You can move the selected
message to archive.
•
Mark several: You can select multiple
messages, one by one.
59
Archive
You can save the received or sent messages in the
archive folder. To archive a message, select Menu
> Messages > Inbox/Sent Messages > select the
message > select Move to Archive.
Email Messages
You can send, receive, and manage e-mail messages. To
access, select Menu > Messages > Email.
The E-mail account has to be configured, created
and activated to access the e-mail messages.
Configuring Email Accounts
Managing Messages
You have to configure and create an e-mail account to
access the e-mail functionality.
1.
To create an e-mail account Menu > Messages
> Email > A message appears Start to create
account? > Select Yes.
2.
Select the specific pre-defined Email service
provider.
For Gmail, Yahoo, Hotmail pre-configured settings
are available. This can be accessed with just User
name & password.
3.
Enter the e-mail address and password and select
OK.
If you get a certificate error, while retrieving or
sending email, complete the procedure provided
below, and install the new certificate.
Installing New Certificate
When certificate for an account is not installed in the
phone, you will get an error. You can install the required
certificate using the following steps.
1.
Example: yahoocert1
4.
Select Options > Done.
Certificate imported message is displayed, once
the certificate is installed successfully.
If you want to create other Email accounts,
1.
Select Other Email accounts.
2.
Enter the e-mail address and select Options > Next.
3.
Select a protocol and select Options > Next.
4.
Select a data account and select Options > Next.
5.
Enter the incoming server address and select
Options > Next
6.
Enter the outgoing server address and select
Options > Next.
7.
Enter the user name and select Options > Next.
8.
Enter the password and select Options > Next.
9.
Enter the account name (if it is not displayed) and
select Options > Done. The e-mail account is
saved.
In the certificate error screen, select Options or
press the center Menu key.
Instead of selecting Options > Next, press the
Menu key to quickly go to the next step.
Certificate installation screen to install the new
certificate is displayed.
2.
Select Install > OK.
Write Email
3.
Enter a certificate Label name in the editor.
1.
Certificate label is a unique user-defined name for
the new certificate. You can enter any name, to
identify the certificate, easily.
To write an e-mail, select Menu > Messages >
Email > Select the Email Account > Options >
Write Email.
2.
Enter the following details:
60
•
•
Managing Messages
3.
To: You can enter the recipient’s e-mail
address.
Subject: You can enter the subject of the
e-mail.
Select Options to enter the following details:
list of inbox options.
3.
To open a message, scroll to a message and press
the Menu key.
4.
To reply, select Options > Reply or press Menu key.
The reply screen with default sender, recipient and
subject details are displayed.
•
Edit: You can edit the subject or content.
•
Address: You can enter the e-mail address of
the recipient, to whom a copy or blind copy of
the e-mail has to be sent.
5.
Press the Menu key to edit to the content section.
6.
•
Add Attachments: You can also include
attachments.
Navigate to the beginning of the message to enter
new content.
7.
•
Priority: You can set the priority for the
message.
Type the content and select Options > Done or
press the Menu key.
8.
Select Options > Send, to reply to the message.
•
Save to Drafts : You can save the e-mail to
draft and send later.
Email Outbox
•
Size: View the size of the mail.
Messages that were undelivered to the recipient due to
some reason are stored in Outbox.
•
Exit: Exit without sending.
1.
To access undelivered messages, select Menu >
Messages > Email > Select the Email Account >
Options > View > Outbox.
Email Inbox
2.
Select Options to display the outbox options.
The Inbox stores and displays all the incoming messages.
3.
Press the Menu key to view the message.
To access the inbox, select Menu > Messages >
Email > Select the Email Account > Options >
View > Inbox. The inbox displays a list of messages.
4.
Press Options > Send to send the message.
If you get a certificate error, while retrieving or
sending email, refer “Installing New Certificate” on
page 60, and install the new certificate.
Messages that have been sent and delivered are stored
in Sent.
4.
1.
2.
Select Options > Send.
Scroll to a message and select Options to view the
Email Sent
1.
To access sent messages, select Menu >
Messages > Email > Select the Email Account >
61
Options > View > Sent.
2.
Select Options to display the sent options.
3.
Press the Menu key to view the message.
Email Draft
Messages that have been saved to be sent later are
stored in Drafts.
Managing Messages
1.
To access unsent messages, select Menu >
Messages > Email > Select the Email Account >
Options > View > Draft.
2.
Select Options to view the draft options.
3.
Press the Menu key to view the message.
4.
Press Options > Send to send the message.
Broadcast Messages
Broadcast messages are sent by the network operator,
to all the users connected to the mobile network. You
can select to receive broadcast messages. On the
home screen, select Menu > Messages > Broadcast
message.
•
Receive mode: Select On to get information about
the reception tower.
•
Read message: Select this to read the message.
•
Languages: Select the required language.
•
Channel settings: Select, add, edit, and delete
channels.
Templates
When you send messages to contacts, you can use the
predefined messages stored in Templates folder. You
can use a text message template for an SMS message
and multimedia message template for an MMS message.
On the home screen, select Menu > Messages >
Templates.
Message Settings
To view or define settings for your messages, select
Menu > Messages > Message settings.
SMS Settings
Select Message settings > Text message to edit the
following SMS settings:
•
Profile settings: View and edit the profile name,
SMSC address, and type of message.
•
Voicemail Server: Configure the voicemail server.
•
Common settings: Set the following options:
Settings
Function
Save sent
message
Save the sent messages.
•
Memory status: View the number of messages
stored in the SIM and mobile phone.
•
Preferred Storage: You can select mobile phone or
memory card as the storage location of messages.
MMS Settings
Select Message settings > Multimedia message to edit
the following MMS settings:
62
Managing Messages
•
Data Account: Select the MMS data account.
•
Common settings: Set the following options:
Settings
Function
Compose
You can set the slide time, creation
mode, picture size and select to
insert signature automatically. You
can enter the text, picture, video, or
sound for the signature.
Sending
You can set the validity period,
activate to receive the delivery and
read reports, priority, delivery time
and save the sent message.
Retrieval
You can select to retrieve the
message in home network or while
roaming.
You can also allow or reject
anonymous mails and
advertisements, You can send the
read report and delivery report.
Preferred
storage
You can select phone or memory
card as the storage location for
messages.
Memory
status
You can view the number of
messages stored in phone and
memory card.
63
You can activate and modify various settings on your
Sonim XP5560 BOLT IS (ECOM Ex-Handy 08 or Ex-HSPA
08) phone using Profiles.
activate the meeting mode from the home screen.
•
Outdoor: Here both the vibrate and ring modes are
enabled. Parameters in this mode can be changed.
Select Menu > Settings > Phone settings >
Profiles > Outdoors > Options > Customize to
open the Customize screen. You can use this screen
to choose tone settings, ring volume, alert type, ring
type, or extra tone.
•
Silent: Here all the alerts are on mute. Select Menu
> Settings > Phone settings > Profiles > Silent >
Activate to activate this profile.
On the home screen, select Menu > Settings > Phone
settings > Profiles to display the options.
You can also access Profiles from Menu > Profiles.
Managing Profiles
You can customise the profiles to use features such
as tone settings, ring volume, alert type, ring type and
extra tone. There are six environment profiles present in
this phone. General is the default profile, while the other
profiles are Meeting, Outdoor, Silent, Flight mode and
Headset.
You cannot change the parameters for the
Silent mode.
•
•
General: The default profile where all sounds are
enabled. Parameters in this mode can be changed.
Select Menu > Settings > Phone settings >
Profiles > General > Options > Customize to open
the Customize screen. You can use this screen to
choose tone settings, ring volume, alert type, ring
type or extra tone. Select Menu > Settings > Phone
settings > Profiles > General > Options > Activate
to activate this profile.
Meeting: Here only the vibrate mode is enabled.
Parameters in this mode can be changed. Select
Menu > Settings > Phone settings > Profiles
> Meeting > Customize to open the Customize
screen. You can use this screen to choose tone
settings, ring volume, alert type, ring type or extra
tone. Select Menu > Settings > Phone settings
> Profiles > Meeting > Activate to activate this
profile. You can also press and hold the # key to
Alarm tone will be played even in Silent profile.
•
Flight mode: Select Menu > Settings > Phone
settings > Profiles > Flight mode to open the Flight
64
mode screen. Select Flight mode to activate this
profile. In this mode, you cannot make or receive
calls but can play Media player. You can deactivate
the flight mode only by selecting Menu > Settings >
Phone settings > Profiles > Flight mode > Normal
mode.
•
Headset: Headset mode is activated automatically
when wired headset is inserted. User cannot change
to other profiles except Flight mode when wired
headset is inserted Parameters in this mode can be
changed. Select Menu > Settings > Phone settings
> Profiles > Headset > Customize to open the
Customize screen. You can use this screen to
choose Tone settings, Volume, Alert type, Ring type
or Extra tone.
Managing Profiles
Sound Settings
Select Menu > Settings > Phone settings > Profiles >
General > Customize. Changing it effects the current set
profile. The following sound settings are displayed:
1.
Tone settings: You can set the tone for incoming
calls, messages, and keypad.
2.
Volume: You can set the volume for ringtone and
keytone.
3.
Alert Type: You can set the alert type for incoming
calls and messages. You can select Ring only,
Vibrate only, Vibrate and Ring, Vibrate then ring.
4.
Ring type: You can set the ringtype for your calls.
You can select Repeat, Ascending or Beep once.
You can download and store ring tones over
Bluetooth or WAP. The supported ringtone
formats are MIDI, MP3, WAV, AAC and AMR.
5.
Extra tone: You can set tones for warning, error, and
connect tone for calls.
65
This section contains miscellaneous features supported
by the handset.
Alarm
Calendar
The calendar enables you to set appointments, schedule
reminders when required, set alerts and repeat specific
settings. Tasks can be viewed on daily and weekly basis.
1.
Tools
2.
Done and Save.
To access the calendar and its associated functions,
select Menu > Tools > Calendar. The calendar for
the current month is displayed. Use the navigation
keys to navigate across months.
You can set alarm for a particular time. Select Menu >
Tools > Alarm.
1.
To set a simple alarm, select Menu > Tools > Alarm
> Edit > On. Enter the time and select Repeat >
Once. Select Done.
2.
To set a recurrent alarm, select Menu > Tools
> Alarm > Edit > On. Enter the time and select
Repeat > Everyday or Custom. Using the Menu
key, select the day and select Done.
Select Options to view the list of options available.
•
View: You can view the list of events for the
day.
3.
To set the alarm tone, select Menu > Tools > Alarm
> Edit > Alarm tone > Tone. Select the alarm tone.
•
View all: You can view all the events.
4.
•
Add event: You can enter a new event.
•
Delete event: You can delete an event.
To enable snooze, select Menu > Tools > Alarm >
Edit > Snooze. Use the left and right arrow keys to 66
set the time for snooze.
•
Jump to date: You can go to a particular date
and view the events for that date.
•
Go to today: You can access the current date.
•
Go to weekly view: You can view the list of
events for the week.
When you are in weekly view, the option
changes to Go to monthly view to view the
calendar of the month.
Edit Events
Select Menu > Calendar > Options > View. Select the
event. Select Options > Edit. Make the changes. Select
The alarm will work even if the phone is
switched off or is in Silent mode.
Calculator
The calculator in this phone is designed to perform
simple mathematical calculations.
1.
Select Menu > Tools > Calculator.
2.
To enter the numbers, press the numeric keys.
3.
To use mathematical operators use the navigation
keys.
Navigation Key
Operation
Up
+ (Addition)
Down
- (Subtraction)
Left
* (Multiplication)
Right
/ (Division)
4.
After performing the calculations, press the Menu
key for the final result.
The following calculator options are also displayed.
Scroll down and enter the value in Kg slot or Pound
slot, for example, 10 Kg and select OK.
3.
The Weight 10 Kg is converted to pounds and is
displayed in the Pound slot.
You can select Unit converter > Currency converter to
convert the currency based on rate. Enter the rate and
then enter the local value of the currency. The equivalent
foreign value of the currency is displayed.
World Clock
MC
Clears number from memory
You can view the time of major cities in different time
zones using this function. You also have the option to use
Daylight Saving Time (DST).
MR
Reads the number from memory
The local time is displayed in the lower half of the screen.
M+
Adds a number to the number in memory
and stores the result in memory
M-
Subtracts a number to the number in
memory and stores the result in memory
Options Function
Tools
Kg to Pound.
2.
This phone accepts numbers up to a maximum
of 12 digits per entry.
Unit Converter
You can convert one type of physical units to another
type. Select Menu > Tools > Unit converter.
1.
Select the type of physical unit. Use the Right or Left
navigation keys to scroll. For example, Weight from
1.
To view the international clock, select Menu > Tools
> World clock.
2.
To view the time of different cities, select the
required city using the navigation keys and the time
is displayed.
3.
To set Daylight Saving Time (DST), select Menu >
Tools > World clock > Options > Daylight saving
time for foreign city > On.
4.
To set the home city, select Menu > Tools > World
clock > select the home city and select Options >
Set Home city.
67
Sound Recorder
SIM Services
Select Menu > Tools > Sound recorder.
You can access certain services provided by the operator
using this menu. This feature can be accessed via Menu
> Tools > SIM services.
1.
To record an audio file, select Options > New
record.
2.
To temporarily stop the recording, select Pause.
3.
To continue with the recording, select Continue.
To end the recording, select Stop. A message
appears Save audio? > Select Yes. The recorded
audio file is stored under My files. For more
information refer “Managing Your Files” on page 48.
Audio Playback
Tools
4.
The user can do instant playback of the recorded audio
within the sound recorder. To listen to a recorded audio
file, select Menu > Tools > Sound recorder > Options
> List. You can also select Menu > My files > Open >
Phone > Open > Audio > Open to access the audio files.
Notes
Select Menu > Tools > Notes to store the required
information.
Stopwatch
Select Menu > Tools > Stopwatch to start and stop the
timer, as required.
Text Reader
Select Menu > Tools > Text reader to view and read the
.txt files.
68
You can download more Java applications via WAP,
Bluetooth, SD Card or Java Application Manager.
Data Account and Java Settings
To use the applications requiring internet service, the
Java settings must be set.
Select Menu > Settings > Connectivity > Java Settings.
Select the required data account and save.
Applications
Installing Java Application from WAP
Configure WAP. Launch WAP. Browse to the http/WAP
link where the file (.jar or .jad) is present. Select the file.
The installation process begins. Once the application
is installed successfully, it will be displayed in the
Applications (Java box).
Installing Java Application from Memory Card
Select Menu > My files > Memory card. Select the file
(.jar or .jad). The installation process begins. Once the
application is installed successfully, it will be displayed in
the Java box.
Some Java applications running in the
foreground can be pushed to the background
by pressing the
key.
69
This phone is equipped with a browser that provides
wireless connectivity and access to the Internet. This
feature is available only if you subscribe to a data service
from your network operator for Internet access. You need
to consult your local operator for more details.
If you are unable to view WAP web pages
because of change in WAP parameters or
change in WAP web address or contents,
please consult your network operator and
Internet Content Provider (ICP) for updates.
WAP Browser
Select Menu > Browser. The following sub menus are
displayed:
•
Homepage: This is the page that is displayed first
when you open the WAP browser.
•
Bookmarks: Use this menu to add and
manage your bookmarks and go directly to the
corresponding web address. You can also edit or
delete bookmarks via this menu.
•
Input address: Enter a web address directly and
browse.
•
Last Web Address: View the last visited Web page.
•
Recent Pages: View web pages which you have
viewed previously. Click on them to open the pages.
•
Stored pages: You can view the pages that are
saved.
•
Service messages: This is the inbox for WAP push
messages.
•
Settings: The following configurations can be set via
this menu:
•
Homepage: Set the homepage.
•
Data Accounts: In this menu, existing
accounts are listed on the display. Scroll to the
required account and select OK.
•
Browser options: You can clear cache,
cookies and authentication information.
•
Preferences: You can set the time out, select
to display or not display images in the web
pages and you can enable or disable the
cookies and cache.
•
Security settings: You can view the trusted
certificates.
•
Service message settings: You can decide
whether or not to receive the push messages
from operators and web portals. You can
enable service loading.
•
Restore browser settings: You can restore to
the original browser settings.
70
Once you logout the PTT service,
Push to talk (Optional)
Push to talk (PTT) application is available on some
models of Sonim XP5560 BOLT IS (ECOM Ex-Handy 08
or Ex-HSPA 08) phone.
You can access PTT services only if you
subscribe to PTT from your service provider.
•
2 Screen
3
PTT1Home
4
5
1.
PTT history tab/
Home tab
When you switch ON the phone , the first time, you can
activate your PTT service by :
2.
Presence status
3.
Contacts tab
1.
4.
Groups tab
5.
Favorite tab
Activating the PTT service
Managing Push to talk Services
is displayed.
To login, select Menu > Push to talk > Select Yes.
Once you login the PTT service,
is displayed
at the top left corner of the home screen indicating
your available status.
2.
Simply pressing the PTT button (on the left side
of the phone ) OR Select Menu > Push-to-talk >
Select Yes to activate PTT service.
Once registered, a Login successful message is
displayed. A Green Icon is displayed at the top left
corner of the home screen. The PTT service will
retrieve PTT contacts and groups if they exist for
your company or corporation.
Press and release the PTT button located in the
left side of the phone, to use PTT service.
PTT button is enabled by default. To disable
PTT launch from left side button, select Menu
> Settings > Dedicated key > PTT Button >
select Off. PTT button can be disabled only
when PTT is logged out.
Login and Logout of the PTT Service
•
To logout the PTT service, select Menu > Push to
talk > Options > Settings > Logout > Select Yes.
71
PTT Overview
A PTT subscriber can have both public and corporate
contacts. Public contacts are created on the phone. You
can add up to 300 public contacts and 30 public groups
each containing 30 members.
Corporate administrator for the company stores the
Corporate contacts to the phone. You can add up to
1000 contacts and 100 corporate groups each containing
up to 250 members per group.
The maximum number of supported contacts
depends on the software configuration.
You cannot edit or delete corporate contacts and groups.
These are managed by the corporate administrator.
Managing PTT Services
A PTT subscriber will be able to:
•
Create groups with other public contacts.
•
Create group with mix of public and corporate
contacts.
•
Rename public contacts, groups or any group
members.
•
Delete public contacts.
•
Delete any groups created by the PTT subscriber.
•
Make PTT calls to public and corporate contacts.
•
•
Initiate a corporate fixed PTT group call.
•
Initiate a PTT quick group call to other corporate
contacts.
•
Change availability status.
•
Send alerts to other corporate contacts.
•
Add contacts and groups as favorites.
• Log off.
Disallowed Corporate Only Subscriber Rights
A corporate only subscriber will not be able to:
•
Create any contacts or groups.
•
Add group members to a group.
•
Edit contacts or groups. The user can only add
contacts and groups as favorites.
Initiate a PTT quick group call to public contacts.
•
Delete any contacts or groups and its members.
•
Initiate a PTT quick group call to a mix of corporate
and public contacts.
PTT Related Key Functions
•
Initiate a PTT fixed group call to a mix of corporate
and public contacts.
PTT related keys present in your Sonim XP5560 BOLT IS
(ECOM Ex-Handy 08 or Ex-HSPA 08) phone are:
•
Send alerts to public and corporate contacts.
•
Add contacts and groups as favorites.
•
Change availability status.
If a company has a corporate administrator, they can
further restrict the PTT capability on the handset by
making the profile as corporate only.
A corporate only subscriber will be able to:
•
Make corporate PTT calls.
Key
Function
PTT key
•
Displays the PTT home tab.
•
Initiate a PTT call.
•
Used for call control
72
Managing PTT Services
Volume
keys
•
Adjusts the volume during an PTT
conversation.
•
Navigates up and down the PTT
Contacts list.
LSK
Activates the menu options displayed at
the bottom of the screen.
RSK
•
•
Sends alert to a selected contact.
Toggles between favorite groups
and contacts in Favorites tab.
Navigation
keys
Scrolls horizontally or vertically to
access a desired menu option.
Power on/
Power off/
End call
key
•
Switch on/off the phone.
•
Return to the home screen when
the phone is in any other screen.
•
Ends an PTT call.
Indicates a new notification.
Manage PTT Settings
To access the PTT Settings, press and release the PTT
button or select Menu > Push to talk. The Home tab with
call history is displayed. Select Options. The following
options are displayed.
•
My Status: Set one of the following options to
indicate your online presence.
•
Available - Indicates your online presence to
other contacts.
•
Do not Disturb - Indicates that you are not
available for calls.
•
View History : View call/alert history specific to the
selected contact.
•
Search: Search for a contact or group entry.
•
Call: Make a PTT call to the selected contact.
•
Send Alert: Send an alert to the selected contact.
•
Delete: Delete the selected contact from the call
history.
Indicates that PTT is activated in your phone,
but you are not logged in.
•
Delete All: Delete all the calls and alerts from the
call history.
Indicates you are logged-on to PTT service
and is available to answer PTT calls.
•
Settings: You can set the alerts, name, sort and so
on.
Indicates you are in Do not disturb mode.
•
Help: View the help for specific functionality.
PTT Display Icons
The common PTT display icons are:
Icon Description
73
Details
Vibrate Alert
Enable or disable vibrate mode
for incoming PTT alerts.
Audible Alert
Enable or disable audible alerts
for incoming PTT alerts.
Alert Repeat
Set the incoming alert
notification to
• Once - The audible alert
occurs once when the
notification is displayed.
• Repeat - The audible alert
occurs immediately, and
every 20 seconds for up
to 10 minutes, until user
clears the notification.
• Continuous - The audible
alert occurs immediately,
and every 20 seconds
until the user clears the
notification.
Managing PTT Services
Options
Notification
Control
Notifications for alerts and
missed PTT calls.
Set Default
PTT Tab
Set the default tab when the
PTT button is pressed or PTT
application is accessed.
By default it is set to PTT
Home or history tab.
To set the default tab,
From the PTT settings > Set
Default PTT Tab, select one of
the following tabs.
• Home
• Contacts
• Groups
• Favourites
Sort Contact
List
Sort the contacts based in
alphabetical order or online
presence.
PTT Tones
Controls PTT tone volume. By
default the tones will be set at
a volume level-03.
To set this option, select PTT
settings > PTT tones > PTT
Alert tones or PTT In call
tones, select the desired tone
and set the volume level.
• Incoming call alert tone
• Missed call alert tone
• Instant personal alert tone
• Floor acquired tone
• Floor free tone
• Floor error tone
74
Managing PTT Services
Headset
setting for PTT
tones
Reduces the loudness of the
PTT tones and normalizes
volume for a headset. By
default the option is disabled.
To edit this option, select PTT
settings > Headset Settings for
PTT Tones
• Enable - normalizes
headset volume
• Disable - switches to
headset volume
Volume
Increase or decrease the call
volume
Display Name
Edit the existing login name .
Show tutorial
View the tutorial for specific
functionality
Capacity
View the contacts, groups and
favourites storage capacity.
Mute incoming
call
Auto start
Mute the incoming call volume,
•
When Phone silent - If
native profile is set to
silent or vibrate only, then
the PTT audio and in call
tones will be muted. (set
by default on activating
silent or vibrate only
profile)
•
Use App volume - On
selecting this, PTT audio
and in call tones are heard
through the loudspeaker.
•
Enable - PTT will
automatically login after
the phone restarts.
• Disable – PTT login will
not happen automatically.
Once the phone restarts
user has to press the PTT
button (left side button)
or select the PTT icon on
the main menu for PTT
application to login.
If phone lock is enabled, then
PTT login will not happen
automatically until the user
enters the correct phone
password.
75
Managing PTT Services
Use Bluetooth
for Audio
Enable - On enabling this,
the PTT media, in call tones
and notification tones would
be played through the BT
accessory connected.
Disable - On disabling this,
the PTT media, in call tones
and notification tones would
be played through the phone
loudspeaker even though BT
accessory is connected.
Speaker phone
default setting
Activates or deactivates
the loudspeaker. By default
loudspeaker is enabled. You
can select one of the following
options:
• Speakerphone off with
incoming call vibrate
alert - loudspeaker is
disabled when incoming
call is set to vibrate alert.
• Speakerphone off
with incoming call
Vibrate/audible alert loudspeaker is disabled
when incoming call is set
to vibrate or audible alert.
• Speakerphone on loudspeaker is enabled
when incoming call is set
to vibrate or audible alert.
Receive call in
background
Always starts incoming PTT
calls in the background. By
default this option is disabled.
To set this option, select PTT
settings > Receive PTT call in
Background and select one of
the following options
• Enable - starts incoming
PTT call in background.
• Disable - starts incoming
PTT call in the main
screen.
Restore
Defaults
Restore PTT settings to factory
default settings.
Reject Voice
Call when PTT
call in progress
Directs voice calls to voicemail
or sends busy signal when the
user is in a PTT call. By default
this option is disabled.
To set this option, select PTT
settings > Reject voice call
when PTT call in progress
• Enable - rejects voice
call when the user is in an
active PTT call.
• Disable - notifies about
incoming voice call when
the user is in an active
PTT call.
About
View the details of the PTT
application
Logout
Logout of PTT session.
76
Managing PTT Calls
A user can make or receive a one-to-one call or one-tomany call (group call). Calls can be dialled directly,from
the call history/home tab, from the PTT contact or group
tab or from the favorite tab.
Managing PTT Services
You cannot call any recipient who is in Do not
disturb or Offline status.
If a call has no response from both initiator and
receiver, it is automatically disconnected after a
short time interval.
For one-to-one calls, the terminated call will be
considered by the client as a ‘Missed call’ if the
receiver never speaks during the entire call.
Direct PTT Calls
To dial a PTT call directly:
1.
Enter the phone number of a contact using the dial
pad on the home screen.
2.
Press and hold the PTT button.
3.
Continue to hold the PTT button to speak.
4.
Release the PTT button when you finish speaking.
5.
To end the call, press End Call (RSK) key or End
key.
Calls from PTT History Tab
The PTT history tab is the home screen for PTT. It
maintains logs of all outgoing PTT calls, received PTT
calls and missed PTT calls and alerts.
To access the PTT history screen, press and release the
PTT button or select Menu > Push to talk.
You can make PTT calls from conversation history by
scrolling to the an entry in the list and pressing the PTT
button.
You can also get more details by highlighting an entry and
selecting Options > View history to see the call and alert
records for the specific entry.
The Search screen is activated by touching a key on the
dial pad.
Calls from PTT Contacts Tab
You can make a one-to-one call and quick group call,
from the PTT Contacts tab.
One-to-One Call
This is a simple PTT session where just one caller and
one recipient are involved in the conversation.
1.
Press and release the PTT button or select Menu >
Push to talk. Go to Contacts tab, to display the list
of PTT Contacts.
2.
Scroll to the contact you want to call. Press and hold
the PTT button. The Screen displays PTT Private
Call in progress.
3.
Continue to hold the PTT button to speak.
4.
Release the PTT button when you finish speaking.
5.
To end the call, press End Call (RSK) key or End
key.
77
Quick Group Call
Managing PTT Services
You can quickly make a single call to many contacts in
the PTT Contacts list.
1.
Press and release the PTT button or select Menu >
Push to talk. Go to Contacts tab, to display the list
of PTT Contacts.
2.
Mark the required contacts to whom you want to
call. You can add up to 10 contacts to initiate a
quick group call.
3.
Press and release the PTT button. You can also
select Options > Call to initiate a quick group call.
4.
Continue to hold the PTT button while you are
speaking. Release the PTT button when you finish
speaking.
5.
To end the call, press End Call (RSK) key or End
key.
Calls from PTT Group Tab
You can make a call to a group by going to the groups
tab and selecting a group.
1.
Press and release the PTT button or select Menu
> Push to talk. Select Groups tab to display the
existing list of PTT groups.
2.
Scroll to the PTT group you want to call. Press and
hold the PTT button to call the selected group. The
Screen displays PTT Group Call.
3.
Continue to hold the PTT button while you are
speaking.
4.
Release the PTT button when you finish speaking.
5.
To end the call, press End Call (RSK) key or End
key.
Sending Alerts
You can send an alert to an individual to let them know
that you want to speak to them, it is a great way of
getting someone’s attention in a more discreet way.
1.
Press and release the PTT button or select Menu >
Push to talk. Select Contacts tab.
2.
Select a contact and press RSK Alert.
3.
The alert is sent to the contact.
Popup alert is displayed until you act up on it
and alert sound will be played after every 20
seconds if alert set to repeat or continuous .
Alert pop and alert sound are dependent on the
respective settings.
You can send an alert only to the individuals
who are online. If your status is set to DND, you
cannot send an alert.
Block Incoming PTT Calls
Press and release the PTT button or select Menu > Push
to talk. Select Options > My Status > Do not disturb, to
block incoming calls from the other PTT members.
is
displayed at the top of the screen indicating that Do not
disturb option is enabled. presence icon is displayed
next to the contact name in the PTT Contacts list of the
other contacts.
78
Manage PTT Contact List
To access the PTT Contacts, press and release the PTT
button or select Menu > Push to talk. Select Contacts
tab. The contacts tab contains the list of members whom
you want to call or send alerts. Your contact list can be
created or copied from your existing list of contacts in
your phonebook.
Select a contact and select Options. By default the first
contact is selected. The following options are displayed.
Managing PTT Services
Some of the options may not be available
depending on corporate account setup.
To add a new contact to the PTT Contacts list, do the
following:
1.
Press and release the PTT button or select Menu >
Push to talk. Select Contacts tab > New Contact.
2.
Select Manual to add the contact details
manually or select Phone to select a contact from
phonebook.
3.
Enter the Contact name and Contact number or
select the specific contact from the phonebook.
4.
Select ON to add the contact to the Favorite
Contacts list.
Select Save. The contact is added to the PTT
Contacts.
Contact Options
5.
•
View Details : View contact details for the selected
contact.
•
View History : View call/alert history specific to the
selected contact.
•
Search: Search for a contact in the Contacts.
•
Delete: Delete the selected contact from the
Contacts.
•
Call: Dial a PTT call to the selected contact.
•
Personal Alert: Send an alert to the selected
contact.
•
Add/remove as Favorite: Add/remove the
selected contact to/from Favorite Contacts.
•
New Group: You can add a new group and also
include a new member to the group.
•
Call: Make a PTT call to the selected contact.
•
Personal Alert: Send an alert to the selected
contact. For more information refer, “Sending
Alerts” on page 78.
•
Edit: Edit the contact details.
•
Delete: You can delete a selected contact from
the Contacts list.
•
Settings: You can edit PTT settings such as the
alerts, volume, and display name, and also logout
of the PTT session. For more information refer,
“Manage PTT Settings” on page 73.
• Help: View the help for specific functionality.
Add Contact
1.
Select a Contact in the Contacts tab and then
select Options > View Details > Options to view
following Contact Options:
Some of the options will not be displayed
for corporate contacts.
79
4.
To access the PTT groups, press and release the PTT
button or select Menu > Push to talk. Select Groups
tab. The Groups tab contains the list of groups with
contacts whom you want to call.
5. Select Save. The new group is created.
Groups Options
Select a group and select Options. By default the first
group is selected. The following options are displayed.
Managing PTT Services
Select Add Members. Select members from PTT
Contacts and select Add.
Manage PTT Groups
•
View Details : View details for the selected group.
•
View History : View call history specific to the
selected group.
•
Search: Search for a group in the groups list.
•
Delete: Delete the selected group from the groups
list.
•
Call: Dial a PTT call to the selected group.
•
Settings: You can edit PTT settings such as the
alerts, volume, and display name, and also logout
of the PTT session. For more information refer,
“Manage PTT Settings” on page 73.
• Help: View the help for specific functionality.
Add Group
To add a new group to the PTT groups list, do the
following:
1.
Press and release the PTT button or select Menu >
Push to talk. Select Groups tab > New Group.
2.
Enter the Group name.
3.
Select ON to add the group to the Favorite Groups
list.
1.
Select a Group in the Groups tab and then select
Options > View Details > Options to view the
following group Options:
•
Call Group: Make a PTT call to the selected
contact.
•
Edit Group: Edit the group details.
•
Delete Group: Delete a selected group from
the Groups list.
•
Rename Contact: Edit the selected contact
name.
•
Add /Remove as Favorite: Add or remove the
selected group to/from Favorite Groups.
Manage PTT Favorite Contacts
To access the PTT Favorite contacts, press and release
the PTT button or select Menu > Push to talk. Select
Favorites tab. The Favorite Contacts tab contains the list
of PTT contacts added as favorites for easy access.
If Favorite Groups is displayed, press RSK to
toggle to Favorite Contacts.
Select a Contact and select Options. By default the first
contact is selected. The following options are displayed.
•
View Details : View details for the selected contact.
•
View History : View call/alert history specific to the
80
Managing PTT Services
selected contact.
•
•
Search: Search for a contact in the favorite contacts
list.
Send Alert: Send an alert to the selected
contact.
•
Edit: Edit the contact details.
•
New Favorite/group: Add a contact/group from
PTT contacts to the Favorite contacts list.
•
Remove Favorite: Delete a contact from the
Favorite contacts list.
•
Call: Dial a PTT call to the selected contact.
•
Settings: You can edit PTT settings such as the
alerts, volume, and display name, and also logout of
the PTT session.
• Help: View the help for specific functionality.
Add Favorite Contact
To add a contact to the PTT favorite contacts list, do the
following:
1.
2.
Press and release the PTT button or select Menu >
Push to talk. Select Favorite Contact tab > Add
Contact.
Select the contact from PTT contacts list.
Select Save. The contact is added to the PTT
Favorite Contacts.
Favorite Contact Options
3.
1.
Select a Contact in the Favorite Contacts tab and
then select Options > View Details > Options to
view following Contact Options:
•
Remove as Favorite: Remove the selected
contact from Favorites Contacts.
•
Call: Make a PTT call to the selected contact.
Manage PTT Favorite Groups
To access the PTT Favorite groups, press and release
the PTT button or select Menu > Push to talk. Select
Favorites tab. The Favorite Groups tab contains the list
of PTT groups added as favorites for easy access.
If Favorite Contacts is displayed, press RSK to
toggle to Favorite Groups.
Select a group and select Options. By default the first
group is selected. The following options are displayed.
•
View Details : View details for the selected group.
•
View History : View call history specific to the
selected group.
•
Search: Search for a group in the groups list.
•
New Favorite: Add a group from PTT groups to the
Favorite groups list.
•
Remove Favorite: Delete a group from the Favorite
groups list.
•
Call: Dial a PTT call to the selected group.
•
Settings: You can edit PTT settings such as the
alerts, volume, and display name, and also logout of
the PTT session.
• Help: View the help for specific functionality.
Add Favorite Group
81
To add a group to the PTT Groups favorite list, do the
following:
1.
Press and release the PTT button or select Menu
> Push to talk. Select Favorite Group tab > Add
Group.
2.
Select the group from the group list.
Select Save. The group is added to the PTT Favorite
Groups.
Favorite Group Options
3.
Managing PTT Services
1.
Select a Group in the Favorite Groups tab and then
select Options >View Details > Options to view
following Contact Options:
•
Call Group: Make a PTT call to the selected
group.
•
Edit Group: Edit the group details.
•
Rename: Edit the selected contact name.
•
Remove as Favorite: Remove the selected
group from Favorite Groups.
Supervisory Override
If this feature is enabled, you can configure the PTT
settings such that the user can be assigned as the
supervisor of a group. If the supervisor override is
enabled,
•
supervisor user will be able to take floor even if
the floor is occupied. Supervisor icon (
)will
be displayed next to the user name when the
supervisor takes floor.
Supervisory override feature will be enabled in
your phone only if your client supports it.
Sonim client cannot be given the supervisory
override privilege. It can be the terminator
end in any of the group calls consisting
of supervisory override privilege enabled
members.
Accessing Other Phone Features during Active PTT Call
You can make regular voice calls, access browser,
messaging while in the active PTT session by pushing
the PTT call to Background from the Options > Go back
from the PTT call session screen.
When PTT call is in background, you can continue to
use PTT key for floor control. PTT call screens will not be
displayed and audio control will work as usual.
Vibration of Incoming voice calls
When PTT call is in receiving state and a GSM call is
received then the phone will vibrate and PTT audio will
continue to play.
82
Camera (Optional)
•
Video Recorder/Camera: You can switch to Video
recorder mode or Camera mode, to shoot a video
or take photographs, or select Photo Album to
view the saved images. Select an image and click
Options to view the image options such as send the
photo, rename the photo, delete the photo, and so
on. Refer “Managing Your Files” on page 48 for further
information.
Managing Multimedia Files
Some models of Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) has a 2MP (megapixel) camera
for taking pictures. The pictures can then be saved in
your phone.
•
Select Menu > Camera OR short press the camera
key. The camera is switched on.
•
Select the Menu key OR press the camera key to
shoot the picture. The picture is automatically saved
in Menu > My files > Phone > Images.
•
Capture mode: You can select the required
Capture mode, from the following options: Normal,
Continuous Shot, and Add frame.
•
After clicking the picture, select LSK (Options) to
display the following options:
•
Scene mode: You can select Auto for the scene
mode to be automatic or Night mode for the image
shot at night.
•
Image size: You can select the picture size from the
following options: Wall paper, QVGA, VGA, 1MP and
2MP.
•
Highlight: You can enable or disable automatic
flash.
•
Self-timer: You can enable the self-time and set it to
5 or 10 seconds. The picture will be shot only after
the set time, after pressing the Menu key.
•
White balance: You can select the required white
background color balance.
•
Effects: You can select the required color effects for
the image to be taken.
•
Advanced settings:
•
Forward: You can send the picture to another
phone as multimedia message, e-mail or via
Bluetooth.
•
Delete: You can delete the selected file.
•
Photo editor: You can edit the captured
images.
Select Menu > Camera > Press LSK > Photo
Album > Select an image > Options > Use
as to set the saved image as wallpaper,
screensaver, and caller picture. Refer
“Managing Your Files” on page 48 for further
information.
Camera Options
To view the camera options, select Menu > Camera >
Press LSK. The following options are displayed.
•
While taking a picture, you can use the navigation arrow
keys to quickly access various camera options.
Storage: You can set the default storage
location for pictures as Phone memory OR
Memory card.
•
Image Quality: You can select the picture
quality from the following options: Fine, Good
83
Managing Multimedia Files
or normal.
•
Time stamp: You can add time stamps to the
images.
•
Shutter sound: You can select the shutter
sound from the provided options.
•
Anti-Flicker : You can set the frequency of
flicker as 50 Hz OR 60 Hz.
•
Restore default: Select this to reset the
camera settings to the original factory camera
settings.
Media Player
You can use the built-in media player to play the audio
and video files. To access media player, select Menu >
Multimedia > Media player. The following sub-menus
are listed:
Now Playing
You can view the audio/video files that is currently being
played. You can pause, stop, play the previous song, or
the next following song by using the navigation arrow
keys. Select Options > Settings to display and set the
following settings:
Settings Function
Player
settings
Define the background display settings,
shuffle the playlist, and song repeat
sequence of the playlist. You can play the
audio in background. A strip in the home
screen indicates that audio is playing
in background. You can also define the
sound effects and Bass enhancement.
Audio
settings
You can define the play speed of the
audio.
Network
settings
You can select and edit the network
profile required for streaming audio files.
My Playlists
You can view all the stored playlists. Select Options to
display the following options:
•
Open: You can open a playlist and select Options.
The following options are displayed:
Options
Function
Play
Play a selected file.
Details
View the details of the file.
Move up
Select a file that is at the top of the
list by moving up. This option is
available only if there are more than
one file.
Move
down
Select a file that is at the bottom of
the list by moving down. This option
is available only if there are more
than one file.
Add
Include a new file to the playlist.
Remove
Remove a file from the playlist.
Send
Send a file as a multimedia
message, E-mail, or via bluetooth to
another user.
Use
Use the file as a ringtone.
84
•
New: You can add a new playlist.
•
Delete all: You can delete all the playlists.
•
Delete: You can delete a playlist.
•
Rename: You can rename a playlist.
•
Storage: You can store the playlist in phone/
memory card (if present on the phone).
Managing Multimedia Files
You can play .mp3, .wav, .amr, and .aac audio
files. You can play MPEG and 3GP video files.
85
Hardcoded Shortcuts
The following are a set of special shortcuts related to
voice calls. Some of these features may require network
support.
•
Enter 0 followed by SEND - releases all held calls
or sets User Determined User Busy (UDUB) for a
waiting call.
•
Enter 1 followed by SEND - Releases all active calls
(if any exist) and accepts the other (held or waiting)
call.
•
Enter 1X followed by SEND - Releases a specific
active call X.
•
Enter 2 followed by SEND - Places all active calls (if
any exists) on hold and accepts the other (held or
waiting) call.
•
Enter 2X followed by SEND - Places all active calls
on hold except call X with which communication
shall be supported.
•
Enter 3 followed by SEND - Adds a held call to the
conversation.
•
Enter 4 followed by SEND - Connects two calls and
disconnects the subscriber from both calls (ECT).
•
Enter 4 * “Directory Number” followed by SEND
- Redirects an incoming or a waiting call to the
specified directory number.
•
Enter 5 followed by SEND - Activates the completion
of calls to busy subscriber request.
•
Enter “Directory Number” followed by SEND Places all active calls (if any exists) on hold and sets
up a new call to the specified directory number.
•
Enter END - Releases the subscriber from all calls
(except a possible waiting call).
“X” is the numbering (starting with 1) of the
call given by the sequence of setting up or
receiving the calls (active, held or waiting)
as seen by the served subscriber. Calls hold
their number until they are released. New
calls take the lowest available number.
Where both a held and a waiting call exist,
the above procedures shall apply to the
waiting call (that is, not to the held call) in
conflicting situation.
86
You can increase the storage capacity by inserting an
optional memory card into the slot inside the phone. You
can perform the following functions on the memory card.
•
Formatting of the memory card.
•
Viewing memory details such as free space and total
space.
•
Storing user data.
Using Memory Card
The maximum capacity supported is up to 16
GB.
Inserting Memory card into the Phone
1.
Ensure the phone is switched off.
2.
Lift the battery cover and remove the battery. For
instructions refer “Inserting the Battery (Zone 1
models)” on page 14 and “Inserting the Battery (Zone
2 models)” on page 14.
3.
Slide and lift the silver clip over the designated slot
located below the SIM card slot.
4.
Place the memory card in the designated slot and
close the silver clip
5.
Replace the battery and the cover. Turn the battery
cover screws clockwise to lock the battery cover.
When the Sonim XP5560 BOLT IS (ECOM ExHandy 08 or Ex-HSPA 08) phone is connected
to a computer in mass storage mode, the
memory card is displayed as a separate drive
in the computer.
When you are logged in to PTT, you cannot
access Mass storage as it will not be
recognized and the message “Currently not
available” will pop up.
87
End User License Agreement
Our Warranty
“Product”).
This wireless device, (the “Device”) contains software
owned by Sonim Technologies, Inc. (“Sonim”) and its
third party suppliers and licensors (collectively, the
“Software”). As user of this Device, Sonim grants you a
non- exclusive, non-transferable, non-assignable license
to use the software solely in conjunction with the Device
on which it is installed and/or delivered with. Nothing
herein shall be construed as a sale of the Software to a
user of this Device.
You may register your phone at www.sonimtech.com/
register to receive further information about your product.
Should your Product need service, please contact Sonim
customer support.
You shall not reproduce, modify, distribute, reverse
engineer, decompile, otherwise alter or use any other
means to discover the source code of the Software
or any component of the Software. For avoidance of
doubt, you are at all times entitled to transfer all rights
and obligations to the Software to a third party, solely
together with the Device with which you received the
Software, provided always that such third party agrees in
writing to be bound by these rules.
You are granted this license for a term of the life of this
Device. If you fail to comply with any of the terms and
conditions set out in this license, it will terminate with
immediate effect. Sonim and its third party suppliers and
licensors are the sole and exclusive owner of and retain
all rights, title and interest in and to the Software. Sonim,
and, to the extent that the Software contains material or
code of a third party, such third party shall be entitled
third party beneficiaries of these terms. The validity,
construction and performance of this license shall be
governed by the laws of Delaware, United States.
Comprehensive 3 Year Warranty
Sonim provides this Comprehensive three-year warranty
for your mobile phone (hereinafter referred to as
Our Warranty
Subject to the conditions of this Comprehensive 3-year
Warranty, Sonim warrants this product to be free from
major defects in design, material and workmanship at
the time of its original purchase by a consumer, and for a
subsequent period of three (3) years.
What We Will Do
If during the warranty period, this product fails to operate
in accordance with its specifications under normal
use and service, due to defects in design, material or
workmanship, Sonim’s authorized distributors or service
partners, in the country/region where you purchased
the product, will repair or replace at the sole discretion
of Sonim, with the same or better model in the same or
better condition as detailed below:
1.
If a device is out-of-warranty, then additional repair
charges may apply;
2.
You will be advised of the charges in advance of any
work being performed;
3.
You will have the option to approve the charges and
have the repair performed, or you may choose to
have your device returned to you unrepaired;
4.
Any repair charges will be billed to you through
Sonim’s Authorized Distributor.
Please note that some of your personal settings,
88
downloads or other information may be lost when your
Sonim Product is repaired or replaced. Sonim does not
take any responsibility for any lost information of any kind
and will not reimburse you for any such loss.
You should always make backup copies of all the
information stored on your Sonim Product such as
downloads, calendar and contacts before handing in your
Sonim Product for repair or replacement.
3.
If Sonim repairs or replaces the Product, the
repaired or replaced Product shall be warranted
for the remaining time of the original warranty
period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement
may involve the use of functionally equivalent
reconditioned units. Replaced parts or components
will become the property of Sonim.
4.
This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse or abuse, including but not limited to use
in other than the normal and customary manner, in
accordance with the Sonim device specifications
and instructions for use and maintenance of
the Product. Nor does this warranty cover any
failure of the Product due to software or hardware
modification or adjustment, acts of God or damage
resulting from liquid interacting with the product
beyond what is described as acceptable in the
user guide for the product. A rechargeable battery
can be charged and discharged hundreds of times.
However, it will eventually wear out - this is not
a defect. When the talk-time or standby time is
noticeably shorter, it is time to replace your battery.
Sonim recommends that you use only batteries and
chargers approved by Sonim. Minor variations in
display brightness and color may occur between
phones. There may be tiny bright or dark dots on
the display. These are called defective pixels and
occur when individual dots have malfunctioned and
cannot be adjusted. Up to three defective pixels are
deemed acceptable.
End User License Agreement
Phone Care
Each Sonim phone has a designated IP class for dust and
water protection, according to the IEC Ingress Protection
(IP) Standard 60529. This means that the phone is dust
protected and can be submerged into 2 m deep water for
up to 60 minutes. Immersion in deeper water can damage
it and must be avoided.
Sonim phones are solid and built for heavy duty use.
Its design protects against disassembly or mechanical
damage when subjected to forces equal to free fall from
the height of 2 meters. Subjecting the phone to stronger
impact and forces can damage it and must be avoided.
Conditions
1.
The warranty is valid whether or not the product has
been registered.
2.
The warranty is valid only if the original proof of
purchase issued to the original purchaser by an
authorized service provider, specifying the date
of purchase and serial number for this Product,
is presented with the Product to be repaired
or replaced. Sonim reserves the right to refuse
warranty service if the device is found to be out of
warranty under the conditions as set forth herein.
5.
This warranty does not cover Product failures
caused by installations, modifications, or repair or
opening of the Product performed by a any person
other than a Sonim-authorized person. Tampering
89
End User License Agreement
with any of the seals on the Product will void the
warranty.
6.
The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Sonim-branded
original accessories intended for use with the
Product.
7.
The 3-year warranty does not cover 3rd party
accessories or any 3rd party software applications,
which are instead covered to the extent provided by
the original vendor guarantee for these products.
8.
THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER THAN
THIS PRINTED LIMITED WARRANTY. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONIM OR ITS LICENSORS BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS
OR COMMERCIAL LOSS; TO THE FULL EXTENT
THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
90
WARNING: Changes or modifications made to
this equipment not expressly approved by Sonim
Technologies, Inc. for compliance could void the user’s
authority to operate the equipment.
FCC Statement
FCC Statement
Sonim XP5560 BOLT IS Ex-Handy 08 .x -A and Ex-HSPA
08 .x -A ( NFC Model name: Sonim XPand NFC FCC
ID: WYPB01V008AA ) devices comply with part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
91
IC Statement
FCC Statement
The following is valid for the Sonim XP5560 BOLT IS ExHandy 08 .x -A and Ex-HSPA 08 .x -A devices:
1.
This Class B digital apparatus complies with
Canadian ICES-003.
2.
This device complies with RSS-310 of Industry
Canada. Operation is subject to the condition that
this device does not cause harmful interference.
3.
This device must accept any interference, including
interference that may cause undesired operation of
the device.
•
This device complies with RSS-310 of Industry
Canada. Operation is subject to the condition that
this device does not cause harmful interference.
92
A
Activating PTT service 71
Add a Favorite PTT Group 82
Add a new PTT contact 79, 81
Add a new PTT Group 80
Call accept/Send key 21
Call history/list 34
Call Restriction 37
Sent 61
Write 60
F
Flight mode 64
Calls on hold/waiting 35
H
Alarm clock 66
Camera
Options 83
Hardcoded Shortcuts 86
Audio
Playback 68
Clear key 21
Contact Options 79, 81, 82
I
B
Contacts
Add 50
Caller groups 53
Multiple contacts 52
My number 53
Phonebook settings 53
Search 54
Send message 50
View details 50
International number dialling 34
D
K
Direct PTT call 77
Keypad
Accept/Send 23
Back 23
Clear 23, 67
End call 23
Function keys 19
LSK/RSK 23
Navigation keys 24
Power On/Off 23
Add new contact 50
Index
Calendar 66
Editing events 66
Battery
Charging indicator 16
Usage Information 14
Block Incoming PTT Calls 78
Bluetooth connectivity 44
Activation 44
Connecting headset 45
Deactivation 44
Deleting paired device 45
Device pairing 44
Renaming paired device 45
Sending data to paired device 46
Settings 45
Specifications 44
Supported Profiles 44
Bookmarks 70
C
Display settings 38
E
E-mail 59
Configuring Email account 60
Draft 62
Inbox 61
Outbox 61
Homepage 70
J
Java
Installing Java Application From
Memory Card 69
Installing Java Application From
WAP 69
93
L
P
T
Language Settings 38
Themes 38
Loneworker monitoring 33
Profiles 64, 65
Flight 64
General 64
Headset 64
Meeting 64
Outdoor 64
Silent 64
Lone Worker Monitoring 33
PTT call me alerts 78
M
PTT Calls 77
Memory card 87
Insert 87
PTT Corporate only subscriber 72
Left Selection Key 21
Login and Logout of PTT Service
71
Index
Menu
WAP 33
Messages
Broadcast 62
Drafts 58
e-mail 57
Inbox 57
MMS 56
Outbox 58
Sent 59
Settings 62
SMS 55
Template 62
PTT conversation history 77
Tools
Alarm clock 66
Calculator 66
Calendar 66
Notes 68
SIM card menu 68
Sound recorder 68
Stopwatch 68
Text reader 68
Unit converter 67
World clock 67
PTT Group Call 78
U
PTT related key functions 72
Unit converter 67
PTT Settings 73
USB function 47
Q
V
Quick Group PTT Call 78
Voicemail
Server settings 62
R
Recording a call 37
W
N
S
WAP 33
Address 70
Service inbox 70
Settings 70
Near Field Communication (NFC)
27
Security Settings 42
World clock 67
Send a PTT call me alert 78
Write Messages 55
Network Connectivity 44
Restricting incoming calls 37
Silent mode 64
O
Sound Recorder 68
One-to-One PTT Call 77
Speed dial 39
94
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement