Raspberry PI Heat Sink Kit
The Farnell Raspberry PI heat sink kit will ensure your Raspberry PI remains cool with no
need for Fans. They will also help extend the life of your Raspberry PI and thereby reduce
hardware failures.
The heat sink kit comprises of 3 high quality Pressfin heat sinks which are designed to fit
the 3 main heat sources on the Raspberry PI. Included in the kit is a 50mm × 50mm piece of
thermal adhesive tape to securely fix the heat sinks in place and to ensure a good thermal
transfer bond.
Dimensions : Millimetres
Part Number Table
Part Number
Raspberry PI Heat Sink Kit
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Page <1>
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF