1603-069

1603-069
DOORKING PARKING CONTROL PRODUCTS
Rev 6/08
MODEL 1603 Barrier Gate / Auto-Spike Operator
Maximum arm length 14-feet
The Model 1603 is designed to mechanically link traffic control auto-spikes to the operator arm. The
1/2 HP unit can be used for traffic lanes up to 12-feet wide and uses a 14-foot round aluminum arm or
a 14-foot 1 x 4 kiln dried wood arm.
Standard Features
1603 Operator
•
•
•
•
•
•
•
•
•
•
•
½ HP continuous duty motor.
Arm rotates 90° in approximately 1.5 sec.
Maintenance free magnetic limits
Plug-in loop detectors
2 convenience outlets
Up input memory buffer
Down memory option
Multiple UP commands
Built-in timer
Auto-sequencing inputs for easy interface with
slide or swing gate operators
Gate Tracker reporting output provides operator
data to access control system*
(*DKS systems with card access only)
•
•
5-year limited warranty
Secondary entrapment prevention devices
should be used with this barrier gate
operator. Refer to Section 3, Pg 9-11 for
selection of devices.
Spike Sections
•
•
•
•
•
•
•
End Cap
Available in 3 and 6 foot sections
Surface mount
End cap required when using surface mount
spikes
Surface mount housing is painted bright yellow,
spikes are painted bright red
Auto-spikes install on concrete roadways
only
Traffic signal and/or warning sign must be
used with this system.
1-year limited warranty
Surface Mount Spikes
Dimensions
Shipping Weight
Regulatory
Power
1603 (1/2 HP Unit)
43.75”H x 15.25”W x 14.75”D
200-220 Lbs.
Class of Operation: III, IV
115 VAC, 60 Hz
5.4 A
230 VAC, 60 Hz
2.7 A
460 VAC, 60 Hz
1.4 A
Auto-Spikes Surface Mount
31”W x 3”H x 36” or 72”L
165 Lbs.
www.leedan.com
Surface mount unit
Concrete roadways only
[email protected]
N/A
Toll-Free: 800-231-1414
DOORKING PARKING CONTROL PRODUCTS
Rev 7/24/08
STEP 1 – Select Operator(s)
P/N
Description
1603-080
Barrier Operator 115 VAC / Auto-Spike
1603-081
Barrier Operator 115 VAC / Auto-Spike w / DC convenience open
1603-082
Barrier Operator 230 VAC / Auto-Spike
(Note 2)
1603-083
Barrier Operator 230 VAC / Auto-Spike w / DC convenience open
(Note 2)
1603-084
Barrier Operator 460 VAC / Auto-Spike
(Note 2)
1603-085
Barrier Operator 460 VAC / Auto-Spike w / DC convenience open
(Note 2)
STEP 2 – Select Arm. Add cost to above prices
P/N
Description
1601-216
14-foot aluminum arm
1601-242
Aluminum Arm Hardware Kit (Arm NOT Included)
1601-310
Aluminum arm and folding bracket assembly.
1601-048
14-foot wood arm
1601-240
Wood Arm Hardware Kit (Arm NOT included)
1601-084
Wood arm and folding bracket assembly
Note 1
Note 1
STEP 3 – Select Spike Components. Add cost to above prices
P/N
Description
1603-192
Tunnel Section 2 Ft., Surface Mount
1603-193
Tunnel Section 3 Ft., Surface Mount
1603-073
Spike Section 3 Ft., Surface Mount
1603-076
Spike Section 6 Ft., Surface Mount
1603-118
Surface Mount End Cap
1603-069
Spike Connector Assembly
(Note 3)
Accessories
P/N
9409-010
Description
DoorKing plug-in 2-channel detector. Use with DKS operators only.
9410-010
DoorKing plug-in single channel detector. Use with DKS operators only.
1601-260
Foam padding kit for aluminum or wood arm
1601-092
Heater Kit
1601-093
Fan Kit
Notes:
(1) Arm hardware kits include the arm mounting hub, the appropriate arm mounting bracket and necessary hardware.
(2) These operators use a step-down transformer to achieve 115 VAC operating voltage.
(3) Connector assembly is required when connecting spike units together.
www.leedan.com
[email protected]
Toll-Free: 800-231-1414
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement