Explosion-proof integrated pan & tilts with camera housing Revision 1140 Main Features Absence of external wiring in rotation Explosion-proof certified Indoor and outdoor installations Wide range of accessories Weatherproof standard IP66 2 Explosion-proof systems EXPTC-EXPTD Description The EXPT system includes a housing with the same characteristics of the EXH and a Pan & Tilt, designed for movement both in horizontal and vertical planes. The peculiar characteristic of the EXPT device is the absence of external wiring in rotation, either for the control of the Pan & Tilt or for the camera and lens. This solution makes the installation and the maintenance of the Pan & Tilt easy. The EXPT includes one multiconductor cable that comes out from the base of the Pan & Tilt through a cable-gland. The EXPT is supplied with preset and housing heater. The EXPT can be equipped with sunshield, autopan, reinforced housing heater and motors heater, and patented glass protection device (model EXPTD). EXPTC + EXPTS000 The glass protection device consists of a connection flange with the housing, a closing flange and an explosion-proof central body containing a rugged and transparent glass, a continuous current motor powered in 24Vac, two windings and a transparent Mylar film, installed just in front of the glass. The motor drives the roller to recover the dirty Mylar film, while at the same time the other roller installed on the opposite side releases the clean film. The transparent Mylar film allows about 350 steps. When the film is dirty, the operator will activate the motor shifting the film to obtain a clean camera picture. The end of the Mylar film will be indicated to the operator through marks printed on the last 50cm of the film. The Pan & Tilt units EXPT, supplied with integrated camera housing, are made with strong Anticorodal aluminium die-cast alloy of AISi 7Mg EN - AB 42000 group. Depending on the model, all external components are stove enamelled using powder or with special coatings offering an excellent resistance to UV rays, salt-spray, environment polluting substances (mod. 035R, mod.033R). They are constructed according to the 94/9/CE ATEX standard and IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008, GOST-R standard and the Chinese standards. EXPTD + EXPTS001 EXPTWB Bracket for EXPT, constructed in solid, anticorodal aluminium alloy. It is particularly suitable for external applications. It can support a maximum non-static weight of 100kg. EXPTWB000 EXPTC-EXPTD www.videotec.com Data Sheets Specifications subject to change without notice. © Videotec S.p.A. All rights reserved. 85 • • • • • • • EXPTD001 • • • EXPTD011 • • • • • EXPTC033R EXPTD035R Max consumption • • Reinforced heater and P&T heater 24Vac Preset • EXPTC010 Glass protection device Pre-wired multipolar cable EXPTC000 Autopan Housing heater 24Vac Available models Code 2 Explosion-proof systems EXPTC-EXPTD 145W 145W • 145W • 145W • • 145W • • • 145W Technical data General Non-corrosive die-cast aluminium (anticorodal) Bicomponent polyurethane enamel with orange peel effect, RAL7032 Special painting for low temperature, blue colour RAL7001 (EXPTC033R, EXPTD035R, EXPTWB00R). Resistant to stress cracking, adverse weather conditions, detergents, saltspray and typical airborne pollutants Supplied with instruction manual and conformity declaration EXPTC-EXPTD 86 Mechanical 0-360° horizontal movement Horizontal speed: 6°/s Horizontal Torque: 2.5kgm ±90° vertical movement Vertical speed: 2.4°/s Vertical torque: 6kgm Horizontal limit switch adjustable only for the Autopan function 1 cable gland Ex d 3/4” NPT IP66 ATEX for armoured cables in the base of the P&T according the housing marking One multiconductors armoured cable normally supplied 7.5m (24ft) length, diameter 20.8mm (0.8in): 25 poles 0.5mm, 4 poles 1mm, 2 RG175, 75 Ohm External dimensions EXPTC 427.5x571.4x560mm (16.8x322.5x22in) EXPTD 573.5x581x580mm (22.6x22.9x22.8in) Internal dimensions EXPTC Ø 180x380mm (7x14.9in) EXPTD Ø 180x460mm (7x18.1in) Internal usable area EXPTC 100x100x280mm (3.9x3.9x11in) EXPTD 100x100x280mm (3.9x3.9x11in) Glass window EXPTC Ø 114mm (4.5in) EXPTD 70x56mm (2.7x2.2in) Glass protection device •Glass protection device: Ø 250x140mm (9.8x5.5in) •Mylar film 80mm (3.1in) wide and 18m (59ft) length, about 350 shifting steps, marks printed on the last 50cm (19in) Wall Bracket •Load rating: 100kg (220lb) •Length: 676mm (26.6in) Videotec CCTV Products Electrical Power supply IN 24Vac, 50/60Hz Horizontal and vertical motor consumption: 50W max Standard vertical and horizontal preset potentiometers Heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F) •IN 24Vac, consumption 20W max Reinforced heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F) •3 resistors in the housing •2 resistors in the P&T (one for each motor) •Consumption 100W max Glass protection device •24Vac/Vdc, consumption 2W max Devices to install inside the housing •Camera equipped with lens with max total power of 20W •Power supply max 24Vac (only for analog camera) Environment Indoor / Outdoor Operating temperature with heater: -20°C/+50°C (-4°F/+122°F) Operating temperat. with reinforced heater: -40°C/+50°C (-40°F/+122°F) Always refer to the temperature in the marking. Certifications ATEX (EN 60079-0: 2010, EN 60079-1: 2008, EN 60079-31: 2010) •b II 2G Ex d IIC T6 Gb •b II 2D Ex t IIIC T85 °C Db IP66 c 0044: notify number from competent body IECEx (IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008) •Ex d IIC T6 Gb •Ex t IIIC T85 °C Db IP66 GOST-R •1 Ex d IIC T6 и DIP A21 TA T6 CNEX •Ex d IIC T6 DIP A21 TA T6 Accessories EXPTS000 Sunshield 650mm (25.6in) for EXPTC EXPTS001 Sunshield 760mm (29.9in) for EXPTD Brackets and adaptors EXPTWB000 Bracket for EXPT RAL7032 EXPTWB00R Bracket for EXPT RAL7001 Specifications subject to change without notice. © Videotec S.p.A. All rights reserved. Related products EXDTRX3 Telemetry receiver 17 functions, 230Vac EXDTRX324 Telemetry receiver 17 functions, 24Vac Spare parts OEXMYLAR OEXVET OEXDPV OSLIEX OSLIEXD Mylar film replacement kit, 18m (59ft) 350 steps Front flange complete with glass for EXPTC RAL7032 Front flange complete with glass protection device for EXPTD RAL7032 Internal slide complete with heater for EXPTC Internal slide complete with heater for EXPTD 2 Explosion-proof systems EXPTC-EXPTD 571 428 308 395 Ø 210 Ø 114 165 455 560 Ø 210 301 EXPTC 581 308 70 415 56 Ø 210 574 165 455 580 Ø 250 301 EXPTD mm 1:10 Package Code Package weight Package dimensions (WxHxL) Master carton kglb kglb cmin unit EXPTC 56.5124.6 61.2134.9 76.0x41.0x67.029.9x16.1x26.4 - EXPTD 62.0136.7 66.0145.5 76.0x41.0x67.029.9x16.1x26.4 - EXPTWB 11.024.3 11.024.3 - www.videotec.com Data Sheets Specifications subject to change without notice. © Videotec S.p.A. All rights reserved. EXPTC-EXPTD Unit weight 87 220 676 180 8 20 23 230 270 2 Explosion-proof systems EXPTC-EXPTD Ø 11 Ø 206 Ø 180 Ø 8.5 Ø 60 573 EXPTWB mm 1:10 EXPTC-EXPTD 88 Videotec CCTV Products Specifications subject to change without notice. © Videotec S.p.A. All rights reserved.