CADENZA-bd

CADENZA-bd
BUILDING PRODUCT DECLARATION
Ventilation products
Page 1 (3)
Issue no 1
Date of latest amendment 2005-05-30
General
Product/product group: Rectangular attenuator/Acoustics
Designation:
CADENZA a
Manufacturer:
Company Reg. No: 556077-8465
SWEGON AB, Sweden
Contact (telephone, fax, e-mail): Martin Bergström, Telephone:+46 570 844 40, Fax:+46 570 175
40, E-mail:[email protected]
Information about the manufacturer
Quality assurance system established
yes
System secured by:
ISO 9001 certification
no
Other system
Environmental policy established by company management
yes
no
Company affiliated to ICC trade/industry programme
yes
no
Company EMAS registered
yes
no
Environmental management system established
yes
no
System is secured by:
ISO 14001 certification
Other system
Company works with Life Cycle Analysis (LCA)
Other details about internal environment work:
yes
no
LCA is among other things shown as a yearly
investigation of the companies environmental
aspects.
Product information
Criteria for environmental labelling of industry products is not available at present
Recommended area of application is outlined in the technical documentation
yes
no
There is clear and responsibly applied labelling on the product/product group
(manufacturer, product designation etc)
yes
no
The labelling is linked to the technical documentation so that the product can be
clearly identified
yes
no
Other labelling or certification:
1 Constituent materials
Details refer to standard products, therefore there may be some deviation depending on choice of variant, accessories etc.
Substance
Proportion Recycled
material
Insulation, glasswool(Cleanolon
AL)
Putty, Polyuretan(sikaflex 521)
27%
75%
Re-usable Recyclable
material
material
95%
95%
Energy
recoverable
material
For
disposal
5%
<1%
Template: Product decl.dot Document:CADENZA_bvd_eng
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
BUILDING PRODUCT DECLARATION
Ventilation products
Page 2 (3)
Plastic, Polyuretan
Substance
<1%
Proportion Recycled
material
Plastic, Polyeten
Galvanized steel sheet
Comments on the table:
<1%
73%
Re-usable Recyclable
material
material
20%
Energy
recoverable
material
For
disposal
100%
Materail declaration is based on CADENZA a 1200x800x1850. The
table is not complete concerning shares of recycled material and
recyclable material.
Manufacturer specifies requirements for environmental
declarations, or equivalent from the supplier
yes
no
Manufacturer specifies requirements for product information sheets
in accordance with Sweden’s Chemical Products Act (cf. ISO
110141) from the appropriate supplier of chemicals
yes
no
Yes,
stated in
table
no
The product contains more than 1 per cent by weight of a substance
that appears on Sweden’s Chemicals Inspectorate’s Limitation and/or
Observation Lists
Substances included on Sweden’s Chemicals Inspectorate’s Limitation and/or Observation Lists
and whose proportion in the product > 1% by weight
Substance
CAS Number
Proportion of finished product
2 Production
Production plant requires permit or notification in accordance with
current environmental legislation
Environmental report submitted annually to public authorities in
accordance with current environmental legislation
Environmental statement can be supplied on request
Data on energy consumption and emissions to air, water and soil
from the plant can be supplied on request
yes
no
yes
no
yes
no
yes
no
3 Distribution of finished product
Indicate where the product is manufactured:
Swegon AB, Arvika, Sweden
Method of transportation applicable to the product: External: Mostly lorry, Internal: Electric driven
truck
Material in packaging:
Brown Cardboard
Company affiliated to the Swedish and the German recycling
systems
yes
no
Template: Product decl.dot Document:CADENZA_bvd_eng
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
BUILDING PRODUCT DECLARATION
Ventilation products
Page 3 (3)
no
Company applies a system using re-usable packaging
yes
Company takes back packaging
yes
no
yes
no
yes
no
yes
no
The product requires a supply of energy for operation during its
intended use (electricity, power fuel, etc.)
The product requires chemicals for operation during its intended use
(coolant, lubrication oil, etc.)
Type of chemical:
yes
no
yes
no
The product produces a pollution load of emissions into air/water
(external environment) during its intended use
During normal maintenance, the product requires:
- consumable materials (type)
yes
no
yes
no
yes
no
yes
no
4 Construction phase
Documented instructions for installation and fitting are available for
the product
Included in the documentation are requirements and
recommendations for:
- safety measures to be used during handling and installation
- handling the goods at the workplace
5 Usage phase
During normal maintenance, the product requires:
- chemicals (type)
Documented instructions are available for the operation and
maintenance of the product
The estimated service life of the product, assuming that operation
and maintenance are carried out in accordance with the
manufacturer’s instruction
25 years
6 Demolition
The product has been prepared for environmentally adopted disassembly
Further information about disassembly:
yes
no
The product is re-usable or can be left to fragmentation
and recycling.
7 Residual products
Refer to section 1, Constituent materials
8 Waste products
9 Indoor environment
A declaration concerning the indoor environment is attached to the
building product declaration
yes
no
Template: Product decl.dot Document:CADENZA_bvd_eng
Print date:2005-06-03
Template drawn up by the Swedish Association for Air Handling Industry (Issue 3, March 2001)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement