LPP3
Specification Data
Conventional Rotators
Capacity: 3 Tonnes
MODEL: LPP3-S-WD
RedRock
rotators are a robust heavy duty design built to withstand the harsh and rugged environments
expected in the world of welding and fabrication requirements. Our proven design uses 1 off 254mm diameter
76mm width replaceable hard-wearing polyurethane tyres mounted onto a cast steel drum for maximum durability
and superior traction.
The powered drive unit drives all wheels synchronized using the AC gear motors via the latest inverter control. A
hand held low voltage control pendant on a 3-metre cable provides the operator with full control of the rotator
including a potentiometer for varying the speed, forward/reverse and stop.
All RedRock rotators are grit blasted to SA 2.5 for all structural steel and polyurethane paintwork ensuring that your
investment provides you with many years of reliable, trouble-free use.
The idler roll has the same dimensions to match the powered drive unit. See GA drawing attached.
Power rolls specifications
Model:
Load Capacity:
Rotation Capacity:
Rotation Speed:
Vessel diameter:
Incoming supply:
AC Inverter:
Motor rating:
Control voltage:
Weight:
LPP3-S-WD
3 metric ton (1 power & 1 idler)
3 metric ton (1 power)
0 to 4000mm/min
Min 270mm to Max 990m (at 620mm C-C) @ 60 degree included angle
220V/1 Phase/50/hz (specify input voltage when ordering)
0.5KW
1 x 0.5KW DC motors
24V low voltage control
92Kg Drive
54Kg Idler
LPP3-S-WD (3 Tonne)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement