SXWS9151

SXWS9151
SXWS9151
Chase-Mounted Handicap SX Panel Shower
• 14 gauge panel construction
• Removable hand-held hose assembly
• Available with TouchTime® or air metering valve
• All units factory tested for proper operation
Specifications
Material
All cabinet materials, including interior piping are Type 304 stainless steel. The fixture is
made from heavy gauge stainless steel with seamless welded surfaces.
Construction
Panel
Shower panel has beveled edges for tight wall fit. Recessed soap dish, showerhead,
and push button are secured from back of panel for vandal-resistant installation. Hose
assembly with vacuum breaker has quick disconnect for removal and storage when not in
use. Stainless steel anchor nuts are welded to back of panel and soap dish to accept 1/4" 20 studs which are rear mounted at top, center, and bottom of panel.
Valving
Two valving options are offered on the unit. Both valving types are chase located and feature
two valves – one for the standard showerhead and one for the hose assembly. They are:
• Single temperature air metering valves with 5 to 60 second timing cycle adjustable
from chase side only.
• TouchTime Electronic Control. TouchTime is factory set at 60 second timing.
Showerhead
Bradley “SX” severe service 2.5 GPM showerhead has a fixed direction spray. Spray pattern
is adjustable through orifice with 1/8" Allen wrench.
C
H
Hose Assembly
Hose assembly has supply elbow, quick disconnect, vacuum breaker, 60" hose, hook with
eye, and hand-held showerhead.
Finish
All exposed stainless steel surfaces have a #4 polished satin finish. Brass showerhead and
push buttons are triple chrome plated.
Wall Anchoring
No exposed mounting fasteners in cell area. Fixture is completely secured from pipe chase
side with rust-resistant mounting hardware for walls up to 12" thick.
Fixture requires wall openings and accessible chase for installation and
maintenance. Some field assembly may be required.
Standard Equipment
Unitized stainless shower panel with "SX" showerhead, complete hose assembly for use
by the handicapped, recessed soap dish, choice of valves, and rust resistant hardware for
walls up to 12" thick.
SXWS9151
Models
 SXWS9151 Chase-Mounted HAndicap SX Shower Panel
Standard Selections
Valve Assembly (select one):

ASTM-2 Air Single Temp Metering Valve

TTST-2TouchTime® Single Temp Electronic Metering Valve
NV
No Valve
Page 1 of 2
2/21/2010
This information is subject to change without notice.
Bradley_SecurityShower_SXWS9151
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
SXWS9151
Chase-Mounted Handicap SX Panel Shower
Model C9151
(mm)
41-3/4"
(1060)
72" (1829) to
Finished Floor
Recommended
44"
(1118)
Wall
Opening
9"
(229)
33-11/16"
(856) to
Finished
Floor
Page 2 of 2
2/21/2010
This information is subject to change without notice.
Bradley_SecurityShower_SXWS9151
13"
(330)
43-1/2"
(1105) to
Finished
Floor
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement