0164950~Document~2
ControlCenterTM ADCC0200 and ADCC0300
Keyboard Quick Reference Guide
Keyboard Settings
The default setting for the keyboard is RS485 mode at 19200 baud. To change these settings,
) and CLEAR (
) keys within five
enter the Special Config menu by pressing SHIFT (
seconds of powering up the keyboard. Then press one of the following:
to change baud rate.
to change the mode (ADNet RS485, RS232).
to select Auto Repeat or Make/Break mode. See the matrix manual for correct setting.
to enable/disable the speaker.
Standard Matrix Operations
FEATURE
KEYBOARD COMMAND
ADCC0200
ADCC0300
RS485
RS232
RS485
RS232
Select Monitor
Monitor number →
Select Camera
Camera number →
Select Matrix/Site
Site number →
AND
Pan Left/Right
Joystick Left/Right
Tilt Up/Down
Joystick Up/Down
Telemetry Enable/Disable
Zoom In
(or Twist Joystick Clockwise)
Zoom Out
(or Twist Joystick Anti-CW)
Focus Near
Focus Far
Iris Open
Iris Close
Flip
Engage Auto Iris
AND
,
,
or
Engage Auto Focus
AND
,
,
or
Select Preset
Record Preset
Preset number →
→ Preset number →
Acknowledge Alarm
Select Sequence
Sequence number →
Select View
View number →
Select Salvo
Salvo number →
8200-0855-02 A0
AND
AND
1
Quick Reference Guide
ADCC0200 and ADCC0300
Standard Matrix Operations (continued)
FEATURE
KEYBOARD COMMAND
ADCC0200
RS485
RS232
RS485
RS232
Run Tour
Tour number →
Hold Tour
AND
Restart Current Tour
Last and Next Camera
(When Tour Held)
or
F1 Function
Function number →
F2 Function
Function number →
AND
ADCC0300
Matrix Menu Operations
FEATURE
KEYBOARD COMMAND
ADCC0200
ADCC0300
RS485
RS232
RS485
RS232
Move Cursor Up
Joystick Up
Move Cursor Down
Joystick Down
Move Cursor Left
Joystick Left
Move Cursor Right
Joystick Right
Enter Menu Mode
AND
Page Up (if available)
AND Joystick Up
Page Down (if available)
AND Joystick Down
Page Left (if available)
AND Joystick Left
Page Right (if available)
AND Joystick Right
-
-
-
-
Menu Select
ENTER key
Menu Escape
RS232:
RS485:
2
AND
ADCC0200 and ADCC0300
Quick Reference Guide
Dome Operations
FEATURE
KEYBOARD COMMAND
ADCC0200
ADCC0300
RS485
RS232
RS485
RS232
Exit Dome Menu Mode
Via Dome Menu
Scroll Up Dome Menu
Joystick Up
Scroll Down Dome Menu
Joystick Down
Scroll Left in Dome Menu
Joystick Left
Scroll Right in Dome Menu
Joystick Right
Aux 1 On/Off
Aux 2 On/Off
Aux 3 On/Off
Aux 4 On/Off
Aux 4
momentary
Aux 4
momentary
Enter Dome Menu Mode
→
Cycle Field Options/Values
or
Enter Selection
or
Program Pattern
AND
(or Twist Joystick)
→ Pattern number →
AND
→ Move joystick as
required → Pattern number →
Run Pattern Continuous
Lock/Unlock
Pattern number →
AND
AND
3
Quick Reference Guide
ADCC0200 and ADCC0300
VCR (PIP)/Direct Control Mode
(All Functions Available in Direct Control Mode)
FEATURE
KEYBOARD COMMAND
ADCC0200
RS485
RS232
ADCC0300
RS485
RS232
-
-
-
-
Play
Stop
Rewind
Fast Forward
Record
Pause
Reverse Play
Search
Select VCR Mode
RS232: VCR number →
RS485:
ENTER key
or
Up
Joystick Up
Down
Joystick Down
Left
Joystick Left
Right
Joystick Right
Menu
Enter
Increment/Decrement
Record or Playback Speed
DirectSet Feature
FEATURE
KEYBOARD COMMAND
Initiate DirectSet
ADCC0200
ADCC0300
RS485
RS232
RS485
RS232
Tyco Video
www.TycoVideo.com
8200-0855-02 A0
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising