Datasheet_RFTC
Wireless temperature controller RFTC-100/G
NEW
• The wireless controller in design LOGUS90 measures the room temperature by internal sensor, and based on
the set temperature, it sends a command for heating / cooling.
• Option of setting a daily/weekly automatic control program.
• The temperature controller can be used in one of two ways:
- For controlling an additional heat source (heater, oil radiator, radiant panel) with multi-function
switching units RFSA-6x, RFUS-61 or RFSC-61.
- For control of floor heating, when the internal sensor scans the room temperature, and based on the
value, controls the heating unit RFSTI-11B, which monitors the critical floor value by external sensor.
• Manual control by buttons on the unit.
• Range of measured temperature 0 - 55 °C.
• The backlit LCD display displays the current and set temperature, status (ON/OFF), battery status, day of the
week, current time, etc.
• The unit power supply is 100-230V AC.
• Range up to 100 m (in open space), if the signal is insufficient between the controller and unit, use the
signal repeater RFRP-20.
• Communication frequency with bidirectional protocol iNELS RF Control.
• Color combination of temperature unit in design of frames LOGUS90 (plastic, glass, wood, metal, stone).
:
Technical parameters
Supply voltage:
Apparent input:
Dissipated power:
Supply voltage tolerance:
Temperature offset:
Offset:
Display:
Backlighting:
Transmission indication / function:
Temperature measurement input:
Temp. measurement range and accuracy:
Transmitter frequency:
Signal transmission method:
Range in free space:
Minimum control distance:
Other data
Max. number of controlling actuators:
Program
Operating temperature:
Operating position:
Mounting:
Protection:
Contamination degree:
Cross-section of connecting cables:
Dimensions:Frame - plastic
Frame - metal, glass, wood, granite
Weight:
Related standards:
46
RFTC-100/G
100-230 V AC / 50 - 60 Hz
3 VA / cos φ = 0.1
0.3 W
+10 %; -15 %
2 buttons
/^
± 5 °C
LCD, characters / see Display description
YES / active – blue
symbols
1x internal sensor
0 to +55 °C; 0.3 °C of the range
868 MHz, 915 MHz, 916 MHz
bidirectionally addressed message
up to 100 m
20 mm
Device description
RFTC-100/G
:
Programming button
Control buttons
Displaying the day of the week
Displaying the time
4
Weekly
0 to + 55 °C
vertical
in an installation box
IP20
2
max. 1x2.5, max. 2x1.5 / with a hollow max. 1x2.5
85 x 85 x 20 mm
94 x 94 x 20 mm
72 g
EN 60669, EN 300 220, EN 301 489 directive
R&TTE Directive, Order. No 426/2000 Coll. (Directive 1999/EC)
Display
:
Indication of manual mode
The heating function
switched output
Indicates the state of
connection with actuators
Displaying the temperature
Temperature units °C
Connection
L
N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement