Connex Vital Signs Monitor 2.x Wireless Workflow Training Presentation

Connex Vital Signs Monitor 2.x Wireless Workflow Training Presentation
Connex® Vital Signs Monitor:
Wireless Workflow Training
Spot, Intervals & Continuous Monitoring Profiles
MC126923
1
Welcome!
Thank you for choosing
Objectives:
1. Review the wireless workflow used with the
CVSM to document vitals electronically.
2. Review the workflow steps for the following
profiles:
– Spot Check
– Intervals Monitoring
– Continuous Monitoring
MC126923
2
CVSM and Barcode Scanner
MC126923
3
Spot Check
1. Ensure wireless
symbol is present
in the top right
corner.
2. Touch the clinician
symbol in the top
left corner.
3. Scan the clinician
ID from the
Clinician tab.
4. Press Ok to
confirm.
5. Scan the patient ID
from the Home tab.
Notes:
•
•
•
If clinician ID is not being captured, skip steps 2-4.
Clinician ID will appear in the top left of the display as either a full name, abbreviation, ID, or symbol.
Patient ID will appear in the bottom left of the display as either a full name or abbreviation along with the
patient ID number.
MC126923
4
Spot Check: Continued
6. Acquire desired vital
signs (NIBP, SPO2,
Pulse Rate, Temp).
7. Touch the HT, WT,
PAIN, RR box.
8. Touch a manual
parameter box to
type in a value using
the keypad or select
from a dropdown
menu.
9. Press OK to confirm
entries.
10. After capturing all
desired data, remove
the SpO2 probe.
11. Press Save to send
the vitals to the EMR.
Note:
•
•
•
HT, WT, Pain, RR, and other custom modifiers and manual parameters will
depend upon the facility and device configuration.
Depending upon configurations, pressing Save will send the vitals.
The messages “Save successful” and “Send successful” will appear in the
status bar upon successful sending.
MC126923
5
Spot Check: Continued
Note:
•
•
•
Depending upon device configuration, the readings will remain in the Review tab for 24 hours. Readings can
be manually deleted from the Review tab by selecting the vitals set and pressing Delete and then OK to
confirm. Note: The Review tab holds 400 readings.
The envelope indicates that the set of vitals was sent successfully.
If a set of vitals did not send successfully, select the set of vitals by placing a check in the adjacent box and
then press Send. Press OK to confirm.
MC126923
6
Intervals Monitoring
1. Ensure wireless
symbol is present
in the top right
corner.
2. Touch the clinician
symbol in the top
left corner.
3. Scan the clinician
ID from the
Clinician tab.
4. Touch Ok to
confirm.
5. Scan the patient ID
Note:
from the Home
• Clinician ID (if applicable) and Patient ID will remain on the display when
tab.
Intervals are in use. Powering down the device will clear both the Clinician ID
and Patient ID following Interval use.
6. Touch the interval
• To manually send a set of vitals in Intervals Monitoring, complete steps 1-5,
icon in the NIBP
acquire vital signs (leave pulse ox on for PR and SPO2), and press Save to
box.
send.
MC126923
7
Intervals Monitoring: Continued
7. Select Automatic, Program or
Stat.
8. Adjust the intervals as desired
(see below).
9. Touch Start Intervals.
Automatic
• Adjust the minutes by using the
up/down arrows.
or
• Touch the keypad symbol, enter the
desired value and press Ok.
Program
• Select a pre-set program from the list.
or
• Set up a program by selecting an
interval from the dropdown list. Type in
a frequency by touching the keypad
symbol, enter the desired value and
press Ok.
MC126923
8
Intervals Monitoring: Continued
10. Touch the Review
tab.
11. Select the vitals you
wish to send by
touching the box
adjacent to the set of
vitals.
12. Once vitals are
selected with a
checkmark, touch
Send.
13. Touch Ok to confirm
sending the vitals.
Note:
•
•
Depending upon device configuration, if the readings were sent successfully an envelope will appear next to
the vitals and remain for 24 hours or the readings will be cleared from the review tab. Note: The review tab
holds 400 readings.
Pressing Delete instead of Send will clear the selected vitals from the Review tab.
MC126923
9
Continuous Monitoring
1. Ensure wireless
symbol is present
in the top right
corner.
2. Touch the clinician
symbol in the top
left corner.
3. Scan the clinician
ID from the
Clinician tab.
4. Press Ok to
confirm.
5. Scan the patient ID
from the Home tab.
Notes:
•
•
•
If clinician ID is not being captured, skip steps 2-4.
Clinician ID will appear in the top left of the display as either a full name,
abbreviation, ID, or symbol.
Patient ID will appear in the bottom left of the display as either a full name or
abbreviation along with the patient ID number.
MC126923
10
Continuous Monitoring: Continued
6. Acquire desired vital
signs (NIBP & Temp)
and/or apply desired
continuous monitoring
accessories (etCO2
sampling line, pulseox, EarlySense® sensor,
RRaTM sensor).
7. Touch the HT, WT,
PAIN, RR box.
8. Touch manual
parameter box to type
in a value using the
keypad or select from
Note:
a drop down menu.
• There is no Save button in Continuous Monitoring.
9. Press OK to confirm
• The unconfirmed vitals will stream into the EMR automatically.
entries.
• Vitals will need to be confirmed within the EMR.
MC126923
11
Continuous Monitoring: Continued
6. There is no Save
button in
Continuous
Monitoring. The
vitals stream into
the EMR
automatically.
7. Vitals need to be
confirmed within
the EMR.
Note:
•
•
•
Review tab enables access to a trend table of all readings for the currently selected patient.
You can configure the time intervals displayed, and you can scroll through the last 24 hours of patient
measurements.
To end monitoring, disconnect accessories from patient, touch the Pause button, touch End Monitoring,
choose New Patient (monitor will stay on and clear all data) or Power Down (monitor will clear data and
power off).
MC126923
12
Important Points to Remember
• Ensure that the wireless symbol is present
on the Home screen before scanning and
sending
• Verify that Clinician ID is scanned into the
Clinician field
• Verify that Patient ID is scanned into the
Patient field
MC126923
13
Resources
Thank you for choosing
Customer Care:
1-800-535-6663
Website:
www.welchallyn.com
MC126923
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement