Product Datasheet

Product Datasheet
Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel (831) 761-6555
Fax (831) 761-6544
Product Datasheet
www.Applied-Motion.com
5023-124
NEMA 23 Step Motor
Product Features
Closeout sale in progress
Limited quantity in stock
2-phase hybrid step motor
Standard NEMA 23 dimensions
1.8 degree step angle
Description
Product Description:
The 5023-124 stepper motor with single shaft and 5023-124D stepper motor with double shaft are two-phase
hybrid step motors with a NEMA 23 frame size. The motors are no longer in production (and normally listed as
archived on our website) but are being offered in a closeout sale to clear our inventory. Once the remaining
inventory of these motors is depleted the motors will revert to being listed as archived on our website and will no
longer be available for purchase. This makes the motors a good choice for one-time applications, research &
development work, and hobbyist projects.
For long term projects, please consider theHT23-601 as a replacement. To view all step motors go to the browse
stepper motors page. For additional assistance selecting a step motor contact us or call 1-888-976-8610.
Specifications
Part Number:
5023-124
Frame Size:
NEMA 23
Motor Type:
Standard torque
Part Number w/Double
Shaft:
5023-124D
Motor Length:
3.99 inches
Number of Lead
Wires:
Lead Wire
Configuration:
Lead Wire/Cable
Length:
Lead Wire Gauge:
8
flying leads, no connector
18 inches inches
22 AWG
Unipolar Holding
Torque:
160 oz-in
Bipolar Holding
Torque:
226 oz-in
Step Angle:
1.8 deg
Bipolar Series
Current:
1.75 A/phase
Bipolar Series
Resistance:
3.26 Ohms/phase
Bipolar Series
Inductance:
16.8 mH/phase
Bipolar Parallel
Current:
3.49 A/phase
Bipolar Parallel
Resistance:
0.815 Ohms/phase
Bipolar Parallel
Inductance:
4.2 mH/phase
Unipolar Current:
2.47 A/phase
Unipolar Resistance:
1.63 Ohms/phase
Unipolar Inductance:
4.2 mH/phase
Rotor Inertia:
Integral Gearhead:
Weight:
Storage Temperature:
Operating
Temperature:
4.46E-03 oz-in-sec2
No
2.8 lbs
-40 to 70 °C
-20 to 50 °C
Insulation Class:
Class B (130 ºC)
Maximum Radial Load:
15 lbs
Maximum Thrust
Load:
25 lbs
Shaft Run Out:
0.001 inch T.I.R. max
Radial Play:
0.001 inch max w/ 1.0 lb load
End Play:
0.001 inch max w/ 9.0 lb load
Perpendicularity:
0.003 inches
Concentricity:
0.002 inches
Downloads
Family Datasheet:
Datasheet:
StepMotorWiring-8-lead-striped.pdf
http://s3.amazonaws.com/applied-motion-pdf/5023-124.pdf
2D Drawing:
5023-124 revC.pdf
3D Drawing:
2318102.igs
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement