SX-ULPAN-EVK Freescale Tower System Module with our Optimized Driver

SX-ULPAN-EVK Freescale Tower System Module with our Optimized Driver
SX-ULPAN-EVK
Freescale Tower System Module
Conveniently Evaluate Silex Wi-Fi on your Freescale Kinetis MCU Module
with our Optimized Driver
The SX-ULPAN-EVK , an ultra-low-power dual-band 802.11 a/b/g/n
Wi-Fi tower module with industrial temperature support, enables
leading-edge reliable Wi-Fi connectivity for the development of
connected devices. This peripheral module for the Tower System
features a fully certified Wi-Fi module with the Silex SX-ULPAN
on-board.
Built on world-class expertise from Silex Technology, and powered by
the Qualcomm Atheros 4004 intelligent networking platform, the
Tower Module provides several modes of connectivity, including client
mode, limited access point functionality, and Wi-Fi Direct for peer-topeer networking, enabling easy transfer of content anytime, anywhere.
In summary, the SX-ULPAN-EVK is an evaluation kit designed to
evaluate the SX-ULPAN module, that uses the Qualcomm Atheros 4004
chipset, with the Freescale Kinetis MCU (TWR-K21F120M).
Software Features:
• Modes: Supports Client and Access Point mode
• Authentication Methods: Open System & WPA-PSK (WPA2-PSK)
• Encryption Method: None, WEP. TKIP, and AES
• WPS: Supports Wi-Fi Protected Setup (WPS)
• Supports Roaming, Wi-Fi Direct, and Smart Antenna Slection
TCP, and UDP Protocols Supported on Chip: Helps offload
• IPv4,
the host microcontroller. Functions supported include ARP, iPv4,
UDP, TCP socket support, DHCPv4, Neighbor discovery, broadcast, MTU discovery, address auto config, and TCP zero copy
Specifications:
Product Name
SX-ULPAN-EVK
The SX-ULPAN-EVK ships with the application program
“throughput_demo” installed, which helps you evaluate the
basic wireless functions below:
Wi-Fi Module
SX-ULPAN-2400
Radio Specifications
802.11a/b/g/n
wireless connectivity
• Basic
WEP/WPA configuration
• APBasicScan,
TCP/IP function with HTTP, DNS and SNTP
• Soft Access
Point (AP), WPA client
• Wireless Configuration
(DTIM, Bitrate etc.)
•
Security
Open System, WPA/WPA2-PSK.
Interfaces
SPI Slave
Operating Voltage
3.3 V
Operating Temperature
Continuous Tx/Rx: -40 to +75 degrees C
Periodic Tx/Rx: -40 to +85 degrees C
What is Included:
Current Consumption
Tx ≤ 350mA
Rx ≤ 100mA
• Silex Tower Module (SX-ULPAN – 802.11a/b/g/n)
• Software Deliverables:
Standby ≤ 500uA
Ordering Information
- MQX 4.0.2 OS image
SX-ULPAN-EVK: 802.11a/b/g/n Wi-Fi Tower Module with a binary
image for evaluation.
- Silex Technology’s optimized QCA4004 dual band driver
Requires:
- User Guide and Quick Start Guide
• EVK Quick Start Guide
• Freescale Kinetis Tower Module (TWR-K21F120M)
• Freescale Tower System Elevator Module (TWR-ELEV)
silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners.
Technical information and specifications are subject to change without notice. © 2015 silex technology, Inc. All rights reserved.
silex global sales & support locations
US Office
silex technology america, Inc.
+1-801-748-1199
US toll free 866-765-8761
www.silexamerica.com
[email protected]
Europe Office
silex technology europe, GmbH
+49-2151-65009-10
Germany toll free 0800-7453938
www.silexeurope.com
[email protected]
Corporate Headquarters
silex technology, Inc.
+81-774-98-3781
www.silex.jp
[email protected]
PN: 141-20131-110
REV A 20141203
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement