D1200 SERIES T1, E1 (CCITT) TRANSCEIVER PRODUCT SPECIFICATION

D1200 SERIES T1, E1 (CCITT) TRANSCEIVER PRODUCT SPECIFICATION
D1200 SERIES
PRODUCT SPECIFICATION
T1, E1 (CCITT) TRANSCEIVER
FEATURES
• Supports T1, E1 (CCITT) Data
• Tested and Certified by an Independent Testing Laboratory for
Full Compliance with the Environmental Requirements (Ambient
Operating Temperature, Mechanical Shock, Vibration, Humidity
with Condensation, High-Line/Low-Line Voltage Conditions and
Transient Voltage Protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment.
• No In-field Electrical or Optical Adjustments Required
• Automatic Resettable Solid-State Current Limiters
• Distances up to 46 Miles (74 km)
DESCRIPTION
The IFS D1200 series data transceivers provides point-to-point
transmission of simplex or duplex T1, E1 (CCITT) data signals over
two optical fibers. Models within this series are available for use with
multimode or singlemode optical fiber. Plug-and-play design ensures
ease of installation requiring no electrical or optical adjustments. Each
transceiver incorporates power, carrier detect and transmit/receive data
status indicating LED’s for monitoring proper system operation. The
modules are available in either stand-alone or rack mount
versions.
• Transparent to AMI and Zero Code Suppression Encoding
Schemes
• Point-to-Point Network Architecture
• Hot-Swappable Rack Modules
• Power, Carrier Detect, Transmit
and Receive Data Status
LED Indicators
Available at:
www.
• Data rates up to 2.048 Mbps
APPLICATION EXAMPLES
D
• Comprehensive Lifetime Warranty
• E1/T1 Multiplexed Telephony Systems
• Emergency Phone Stations
• Computer/Data Equipment
• ITS Traffic Signalization Networks
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
MULTIMODE
62.5/125µm**
OPTICAL
PWR BUDGET
DESCRIPTION
FIBERS
REQUIRED
D1210
T1/E1 Compatible Data Link, LED (850 nm)
2
13 dB
1.2 miles (2 km)
D1220
T1/E1 Compatible Data Link, LED (1310 nm)
2
13 dB
8 miles (13 km)
D1225
T1/E1 Compatible Data Link, LED (1310 nm)
2
14 dB
25 miles (40 km)
D1230
T1/E1 Compatible Data Link, Laser (1310 nm)
2
23 dB
46 miles (74 km)
PART
NUMBER
MAX.
DISTANCE*
SINGLEMODE
9/125µm
ACCESSORIES♦
OPTIONS
PS-24ACCT 24 VAC C.T. Transformer (Included)
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-SC’ to Model Number for SC Optical Connector (For Single Mode Equipment Only)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected]
Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661 ■ Latin America TEL (512) 477-8787
D1200 SERIES
TECHNICAL SPECIFICATION
T1, E1 (CCITT) TRANSCEIVER
SPECIFICATIONS
ELECTRICAL & MECHANICAL
Power:
Stand-alone:
Rack:
DATA
Data Interface:
Data Rate:
T1, E1 (CCITT)
DC to 2.048 Mbps. Transparent to
zero suppression code
Impedance
T1:
E1:
Operating Mode:
Number of Rack Slots:
Current Protection:
WAVELENGTH
850 nm
1310 nm, Multimode
1310 nm, Singlemode
NUMBER OF FIBERS
2
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
< 2 lbs./0.9 kg
ENVIRONMENTAL
CONNECTORS
Optical:
Data and Power:
1
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
Circuit Board:
Size (in./ cm.) (LxWxH):
Surface Mount:
Rack Mount:
Shipping Weight:
100 ohms (twisted pair)
120 ohms (twisted pair)
Simplex or Full Duplex
D1210:
D1220:
D1225, D1230:
24AC CT, 250 mA
From Rack
ST
Terminal Plug with screw clamps
MTBF:
Operating Temp:
Storage Temp:
>100,000 hours
-40° C to +74° C
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
AGENCY COMPLIANCE
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
MODEL
Multimode
62.5/125µm**
850 nm
TRANSMITTER
OUTPUT PWR SENSITIVITY
D1210
Singlemode
9/125µm
MAX.
DISTANCE*
1.2 miles (2 km)
20 µw
(-17 dBm)
D1220
1310 nm
OPTICAL
PWR BUDGET
D1225
25 µw
(-16 dBm)
D1230
200 µw
(-7 dBm)
13 dB
1 µw
(-30 dBm)
8 miles (13 km)
14 dB
25 miles (40 km)
23 dB
43 miles (69 km)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
Voice, RS-232 or RS-422
{
1 2 24
T1 Multiplexer
up to 1.2 miles
(2 km)
D1210
ifs
D1210
International
ifs
Fiber
Systems
Incorporated
T1 Multiplexer
International
Fiber
Systems
Incorporated
203.426.1180
203.426.1180
2 Fibers
62.5/125µm MM
1 2 24
{
SYSTEM DESIGN
Voice, RS-232 or RS-422
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
09/10/04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement