SX-SDMGN 802.11b/g/n SDIO Module Diagram:

SX-SDMGN 802.11b/g/n SDIO Module Diagram:
802.11b/g/n SDIO Module
Wireless LAN Module for Mobile Devices with Enterprise Reliability
The Silex SX-SDMGN is a single-band 802.11b/g/n SDIO module
that is based on the SX-SDPGN (Qualcomm Atheros AR6103). The
SX-SDMGN brings 802.11n throughput, range and power efficiency
to portable devices including patient monitors, printers, handheld
terminals and more.
The SX-SDMGN optimizes RF output performance from the
SiP out through the antenna which significantly decreases any
downstream RF related design integration. The radio module
design approach also saves cost as the SX-SDMGN provides
FCC/IC/TELEC modular certification.
The SX-SDMGN provides superior product quality. Silex has
validated that our design meets IEEE standards and each module is
individually tested during the production process. This ensures that
each of our products will perform to our published specification.
In order to expedite your product development process, Silex
can provide both hardware and software engineering services
including custom driver development, as well as turnkey product
design and manufacturing.
Key Features:
• IEEE 802.11b/g/n conformity (2.4 GHz)
stream 1 x 1 SISO technology and 20 MHz bandwidth
• Single
mode (throughput up to 72.2 Mbps)
• Data rates of 1 - 54 Mbps for 802.11b/g and MCS0-7 for 802.11n
• Supports IEEE802.11e and IEEE802.11i
• Supports SDIO 2.0 as host IF of wireless LAN
supports Tx/Rx software selection diversity for
• Optionally
wireless LAN mode
• Supports TDMA/FDMA Bluetooth coexistence
• Calibrated Tx Power per module
• FCC/IC/TELEC modular certification
• Connector mount
Product Name
Qualcomm Atheros AR6103
Host Interface
SDIO V 2.0 (4-bit, 1-bit)
Operating Voltage
3.30 VDC +/- 5%
Radio Specifications
Baseband Specifications
CSMA/CA media access; DSSS, OFDM
Operating Temperature
-20 to +85 degrees C
Connector Mount Dimensions
24.0 x 24.0 x 3.45 mm (W x H x D)
2.412 - 2.484 GHz
PN: 141-00207-120
REV C. 20120928
802.11b/g/n SDIO Module
Dimensions and Architecture
All dimension tolerances are ±0.15 mm, unless otherwise specified.
General Specifications
On-Chip Functionality:
Single-chip MAC/BB/RF/PA/LNA
SDIO 2.0
Frequency Band:
2.4 GHz
Network Standard:
802.11b, 802.11g, 802.11n (1-stream)
Modulation Modes:
Supported Data Rates:
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
1-11 Mbps
6-54 Mbps
7.2 - 72.2 Mbps
Supports 2-, 3-, and 4-wire handshaking
Physical Specifications:
Connector Mount:
24.0 x 24.0 x 3.45 mm (W x H x D)
Hardware Encryption:
Quality of Service (QoS): WMM, WMM-PS, 802.11e
Driver Support
Ordering Information
Reference Drivers:
- Linux
- Android
- Windows Embedded Compact 7
- QNX Neutrino
- Green Hills Intergrity
- Mentor Graphics Nucleus
Connector Mount, Bulk Package
Connector Mount, Sample Pack
AR6003 WLAN Radio Evaluation Kit
(Includes SX-SDMGN-2830C)
silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners.
Technical information and specifications are subject to change without notice. © 2012 silex technology, Inc. All rights reserved.
silex global sales & support locations
US Office
silex technology america, Inc.
US toll free 866-765-8761
[email protected]
Europe Office
silex technology europe, GmbH
[email protected]
Corporate Headquarters
silex technology, Inc.
[email protected]
PN: 141-00207-120
REV C. 20120928
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF