Wall Cabinet Lift Specs

Wall Cabinet Lift Specs
WALL CABINET LIFTS
DIAGO 504
~The Diago wallcabinet lift makes new
and existing cabinets accessible to people
of all heights and abilities.
110 V
.7” sec
~Mounted at the back of the cabinet, the
lift takes up no cabinet space. The lift lowers
in a curved motion to bring the cabinet to
the front edge of the work surface.
17”
kg
330lbs
including
cabinet
Cover valance is an accessory.
FUNCTION
DIAGO 504 is mounted at the back of new or existing wall cabinets.
The lift lowers the cabinet in a curved movement down to the work surface below.
Control:
The cabinet is lowered to the desired height simply by pushing a button. Choose
between recessed control button or remote control.
Safety:
Safety trip panels are mounted under the cabinet. When the panel is touched, the lift
stops immediately.
PLANNING
INSTALLATION
When planning, note the following points:
- The lift can be adjusted to cabinet heights between 28” - 43”.
- Depth of safety trip panel is 13.8”. The lift is suitable for cabinets with a
depth of 11” - 13.4”.
- The lift extends 4.3” from the wall.
(Adjacent cabinets should also be brought out from the wall by 4.3” for
alignment at the front edge.)
- Several cabinets can be mounted on the lift. (Max. 70”)
- There must be 0.2” clearance between the adjacent cabinet and the
cabinet to be lifted to allow space for movement.
- Check the condition of the wall (material, positioning of bolts).
Plaster walls must be strengthened.
- Will the cabinet have worktop lighting? (under the cabinet)
- Which control unit is required?
An area of 3.5” x 3.5” is required for a recessed control button
- The lift is screwed to the wall.
- The control unit is plugged into the wall socket
- The cabinet is mounted on the frame and adjusted so that it is horizontally and vertically aligned.
- The safety trip panels are mounted under the cabinet.
- The control button is mounted in a convenient position.
- Any lighting is mounted under the safety trip panel.
- Light ramp can be mounted on safety trip panel.
Several cabinets can be mounted on the same lift
Page 1 of 2
www.Accessibilitypro.com
1-877-947-7769
WALL CABINET LIFTS
DIAGO 504
TECHNICAL SPECIFICATIONS
22”/37.8”/45.7”/61.4”
21.65”/45.3”
4.33”
28.35”
27.6”-43.3”
435
19.7”
17.1”
8.9”
227
Attachment points (above the floor):
58.46”, 81.7”
(Cabinet is installed 55” above the floor).
Lift in alu design, white safety trip panels
ID
Cabinet
width
DIAGO 504 Incl. ALU control button
white safety trip panels
Safety trip panels (23.75”)
60
Safety trip panels (27.5”)
70
Safety trip panels (31.5”)
80
Safety trip panels (17.7”+17.7”)
90
35.25
Safety trip panels (60+40 cm)
100
Safety trip panels (23.75”+19.7”)
110
Safety trip panels (23.75”+23.75”)
Safety trip panels (23.75”+27.6”)
Cabinet
attachment,
width
Art. no.
22”
504-06001
A
28”
22”
504-07001
A
31.5”
22”
504-08001
A
22”
504-09001
A
39.5”
37.8”
504-10001
A
43.25”
37.8”
504-11001
A
120
47.25
45.7”
504-12001
A
130
51.25
45.7”
504-13001
A
Safety trip panels (23.75”+31.5)
140
55”
45.7”
504-14001
A
Safety trip panels (23.75”+17.7+17.7”)
150
59”
45.7”
504-15001
A
Safety trip panels (23.75”+19.7+19.7”)
160
63”
61.4”
504-16001
A
Safety trip panels (23.75+23.75+19.7”)
170
66.9”
61.4”
504-17001
A
70.86”
61.4”
504-18001
A
Safety trip panels (23.75+23.75+23.75”) 180
24”
* For the Diago with the remote, change last digits from 01 to 02.
Page 2 of 2
www.Accessibilitypro.com
1-877-947-7769
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement