HubWay8D - Passive UTP Transceiver Hub with Integral Camera Power Overview

HubWay8D - Passive UTP Transceiver Hub with Integral Camera Power Overview
HubWay8D - Passive UTP Transceiver Hub with
Integral Camera Power
Rev. DSHubWay8D_10142014
Overview
HubWay8D
HubWay8D Passive UTP Transceiver Hub with Integral Camera
Power transmits UTP video, RS422/RS485 data and power over
a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19” ­­­rack mount chassis
which may be rack, wall or shelf mounted. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with AC and/or
DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayAv2,
HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with
surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with
Integral Camera Power can be used as an accessory module to transmit video
from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWay8D. In addition, the HubSat4D provides power to these cameras locally
to eliminate the possibility of voltage drop associated with long cable runs.
Specifications
Accessories:
Input:
• 115VAC 60Hz, 1.5 amp or 230VAC 50Hz, 1 amp.
Video:
• Eight (8) channels of video over twisted pair
up to a distance of 750 ­ft. (228.6m) per channel.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unit provides up to 1 amp max. per channel not to exceed a total of 5 amp (150VA) maximum current.
• Individually selectable 24VAC or 28VAC isolated
power outputs with OFF position.
• Class 2 Rated power-limited outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 150 W.
• 57 BTU/Hr.
• System AC input VA requirement: 150VA.
Features:
• Eight (8) power LEDs.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
-HubWayAv - compatible with all HubWay UTP Hubs for AC fixed cameras or PTZs.
-HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC fixed cameras
or PTZs.
-HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
-HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or PTZs.
Mechanical:
• Units can be rack, wall or shelf mounted.
• Modular 1U standard EIA 19” rack mount chassis.
• Enclosure Dimensions (H x W x D approx.):
1.625” x 19.125” x 8.5”
(41.275mm x 486mm x 216mm)
• Product weight (approx.): 11.0 lbs. (4.99 kg).
• Shipping weight (approx.): 12.3 lbs. (5.58 kg).
Agency Approvals
UL Listed for Commercial CCTV Equipment (UL 2044).
Enclosure Dimensions (H x W x D approximate):
1.625” x 19.125” x 8.5” (41.275mm x 486mm x 216mm)
17.125”
(434.97mm)
1.625”
(41.275mm)
8
7
6
5
4
3
2
1
AC POWER
8.5”
(215.9mm)
1
2
3
4
CH 1-4
DATA
1-8
0.95”
(24.13mm)
5
6
7
8
CH 5-8
28VAC
OFF
24VAC
19.125”
(485.775mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement