Battery Specifications

Battery Specifications
MARINE/RV
AGM
FEATURES AND BENEFITS
• Premium maintenance-free starting,
cycling, and deep cycle service
• Micro-porous glass separators
prevents acid spills and terminal
corrosion
• Lower internal resistance ensures
higher discharge rates and faster
starts
• 2x the cycle life* extends
performance and life
• 20x more vibration protection*
resists wave-pounding
• Spillproof design enables flexible
installation (upside-down not
recommended) and safe
handling around electronics
• High freeze-resistance
provides better all
weather service
* Compared to conventional designs
From starting performance to a boatload of trolling
and accessory power, Intimidator batteries won’t
have any trouble in meeting marine or RV needs.
A premium spillproof design brings essential
convenience and safety to the boating and RV
enthusiast.
Intimidator Starting and Cycling Service batteries
means high starting and moderate deep cycle power.
Ideal for boaters that want high cranking power and
still enjoy dependable power for more electronic
accessories.
Intimidator Heavy-Duty Deep Cycle batteries have
more fish-finding trolling and accessory power. Ideal
for heavy deep cycle demands, with moderate
starting power. Provides advanced protection against
the typical deep discharge of extended trolling use.
®
Intimidator AGM Solutions for Intimidating Battery Needs
Intimidator is a pioneer brand in the development of the form, fit, and function of AGM battery technology.
It has been tested and proven to best meet the criteria for the various types of dependable marine power needs.
ADVANCED DURABILITY DESIGNS
• Fortified posts, straps, and welds resist vibration damage
• Maximize current transfer over life of battery
POWER-PERFORM FULL-FRAME POSITIVE & NEGATIVE PLATES
• Better withstands rigorous marine demands
• Prevents life-robbing electrical shorts from exposed wire
ENHANCED ELECTROLYTE SUSPENSION SYSTEM
• Absorbs more electrolyte, protects internal components
• Micro-porous glass separators prevents acid spills and terminal corrosion
MARINE/RV INTIMIDATOR AGM BATTERIES
®
GROUP
NO.
34M
U1
U1
22NF
24M
27M
31M
4D
8D
GC2
PART
NO.
PERFORMANCE LEVEL
CCA
@ 0°F
RES.
CAP.
REF.
MCA
20 AH
RATE
APPROX.
WEIGHT
(lbs.)
MAXIMUM OVERALL DIMENSIONS
Length
Width
Height
inch
mm
inch
mm
inch
mm
DUAL PURPOSE ABSORBED GLASS MAT (AGM) VALVE REGULATED
775
120
955
55
41.5
103⁄4 273
67⁄8
175 83⁄8
212
12 VOLT HEAVY-DUTY DEEP CYCLE ABSORBED GLASS MAT (AGM) VALVE REGULATED
8AU1
200
48
240
32
24
7 3⁄4
197
5 1⁄8
130 7 1⁄4 184
8AUIH
200
48
240
32
24
8 5⁄16 211
5 1⁄8
130 7 1⁄4 184
3
1
238
5 ⁄2
140 9 1⁄4 235
8A22NF
350
85
420
55
38.5
9 ⁄8
8A24M
525
135
800
79
53
10 7⁄8 276
6 3⁄4
171 9 7⁄8 251
8A27M
580
175
900
92
63
12 3⁄4 324
6 3⁄4
171 9 7⁄8 251
8A31DTM
800
200
1000
105
69
12 15⁄16 329
6 3⁄4
171 9 3⁄8 238
3
1
8A4D
1110
380
1420
198
129
20 ⁄4 527
8 ⁄2
216 10
254
8A8D
1450
480
1800
245
158
20 3⁄4 527
11
279 10
254
6 VOLT HEAVY-DUTY DEEP CYCLE ABSORBED GLASS MAT (AGM) VALVE REGULATED
8AGC2
680
380
900
190
69.5
10 1⁄4 260
7 1⁄8
181 10 7⁄8 276
9A34M
FOOTNOTES
2, 17, U
2,38,39,Y
2,17,38,39,Y
2,38,39,G
2,17,38,39,U
2,17,38,39,U
2,17,38,39,U
2,17
2,17
2,U
All batteries have SAE automotive posts unless noted
FOOTNOTES: 2. Black cover / Gray case 17. Includes handle 38. “Non-spillable” defined by DOT (Department of Transportation) definitions
39. “Non-spillable” defined by ICAO (International Commercial Airline Organization) and IATA (International Airline Transport Association)
definitions G. Offset post w/ horizontal hole, stainless steel 5/16" bolt and hex nut (T881) U. Molded-in offset SAE post and vertical 5/16"
NEG., 5/16" POS. stainless steel studs & hex nuts Y. Small L terminal with round holes
Experience the East Penn Advantage
East Penn’s A3 ™ Advanced-Cubed precision-focused manufacturing
approach ensures the process behind the technology delivers critical
quality at each stage of battery production. INTIMIDATOR batteries
are supported by A3 manufacturing to optimize the life, power, and durability
of the battery’s design and performance.
Lyon Station, PA 19536-0147 • Phone: 610-682-6361 • Fax: 610-682-4781
Order Department Hotline: 610-682-4231 • www.dekabatteries.com
E.P.M. Form No. 1741 Rev. 12/11
© 2011 by EPM Printed in U.S.A.
All data subject to change without notice. No part of this document may be copied or reproduced,
electronically or mechanically, without written permission from the company.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement