7 2 4 1
7241
BAHN TAPPET ACCENT FOR TWIN CAM, TUXEDO
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN MINOR
OR MODERATE POTENTIAL INJURY.
This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality or damage the product itself or
the product to which it is being attached.
MAKE SURE THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1
1
1
BAHN Tappet Accent, Tuxedo
Hardware Kit, containing:
1
10-24 X 5/8” Socket Head Cap Screw
Installation Instructions
YOU WILL ALSO NEED:
Set of hex wrenches, set of hex bit sockets, in-lbs (Nm) torque wrench
These installation instructions contain important information. Ensure that the end user receives this copy and is
aw are of its importance for future reference.
STEP 1
Read and understand all steps in the instructions before starting the installation. Park the motorcycle on
a hard, level surface and turn off the ignition. Allow the engine and exhaust system to cool.
NOTE:
Some models require the removal of the air cleaner assembly to ease installation.
THE END USER’S SAFETY DEPENDS UPON PROPER INSTALLATION OF THIS PRODUCT. IF A STEP IN THESE INSTRUCTIONS IS NOT WITHIN YOUR CAPABILITIES OR YOU
DO NOT HAVE THE CORRECT TOOLS, HAVE YOUR DEALER
PERFORM THE PROCEDURE. IMPROPER INSTALLATION OF
THIS PRODUCT COULD RESULT IN DEATH OR SERIOUS INJURY.
Avoid damage to the motorcycle. Protect painted surfaces
w ith a soft cloth or blanket.
7241-12HD-0115
-cont.-
7241
BAHN TAPPET ACCENT FOR TWIN CAM, TUXEDO
PIC 1
STEP 2
Remove the two existing screws shown in
REMOVE THE TWO EXISTING SCREWS
PIC 1 ON PAGE 2; they will be reused.
STEP 3
Refer to PIC 2. Locate the included
LIFTER COVERS
Chrome Bracket. Attach the Bracket to the
SOME MODELS REQUIRE THE REMOVAL OF THE
AIR CLEANER ASSEMBLY TO EASE INSTALLATION.
underside of the Accent with the included
screw; leave the screw loose for now.
PIC 2
LOOSELY ATTACH BRACKET TO ACCENT
STEP 4
Refer to PIC 3. Hold the Accent in place, then thread
the two screws through the Bracket and into the lifter
covers; leave them loose for now to allow for adjustment.
PIC 3
STEP 5
ENSURE CLEARANCE, THEN TIGHTEN THE SCREWS
Tighten the two lifter cover screws. Refer to PIC 3.
Ensure that the Accent is not contacting the engine;
adjust the position if necessary, then the Accent
screw.
STEP 6
Torque the two lifter cover screws to 90-120 inlbs (10.2-13.6 Nm).
STEP 7
Reinstall the air cleaner assembly (if removed).
2
-cont.-
7241
BAHN TAPPET ACCENT FOR TWIN CAM, TUXEDO
It is the end user’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Küryakyn w ill not provide w arranty coverage on products or components lost due to improper installation or lack of maintenance. Periodic inspection and maintenance are required on all fasteners.
TIPS FOR PROPER CARE:
Your new BAHN product is made out of anodized aluminum. Anodized aluminum requires special attention when
cleaning. Some cleaning products or procedures can actually remove the anodized treatment which will lead to pitting in the aluminum.
Thoroughly clean the BAHN product often with a soft cloth, mild soap and water. Regular cleaning keeps contaminates from building up.
Rinse thoroughly with FRESH water.
Use only metal protection products that are formulated for anodized aluminum.
DO NOT USE bleach or chlorides to clean the BAHN product.
DO NOT USE products containing abrasives to clean the BAHN product. Never use steel or brass wool, wire
brushes, polishing wheels, rubbing or polishing compounds on the Bahn product.
DO NOT USE concentrated alkaline based solutions to clean the BAHN product. Many detergents are alkaline
based.
3
-cont.-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement