American Legend Advantage 56in Foosball Table

American Legend Advantage 56in Foosball Table
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-888-996-2729
FAX: 1-866-873-3531
[email protected]
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville,IN 47706
Please have your date code when inquiring about parts.
When contacting Escalade Sports please provide your model number, date code (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
FT500GF
Your Model Number
Date Code: 2 - FT500GF Purchase Date:
- MW
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
All Rights Reserved
© 2014 Escalade Sports
1
For Customer Service Call
1-888-996-2729
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS FT500GF SOCCER TABLE
Tools Required:
A2 Allen Wrench (Included)
Phillips Screwdriver
Furniture Polish and Cloth
Assembly Tips
Make sure you understand the following tips before you begin to assemble your soccer table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS SOCCER TABLE
TOGETHER.
All Rights Reserved.
© 2014 Escalade Sports
2
For Customer Service Call 1-888-996-2729
H1 = 4 pcs
7.5mm x 50mm
Allen Head Bolt
H2 = 20 pcs
8.5mm x 19mm
Flat Washer
H3 = 20 pcs
3.5mm x 25mm
Phillips Round
Head Screw
RPFT500GF-H1
RPFT500GF-H2
RPFT500GF-H3
H7 = 26 pcs
4mm x 28mm
Phillips Round
Head Bolt
H9 = 6 pcs
3.5mm x 16mm
Phillips Round
Head Screw
RPFT500GF-H7
RPFT500GF-H9
H4 = 16 pcs
7.5mm x 25mm
Allen Head Bolt
RPFT500GF-H4
H5 = 26 pcs
4mm Nut
RPFT500GF-H5
H10 = 8 pcs
4.8mm x 19mm
Phillips Flat
Head Bolt
H11 = 6 pcs
3.5mm x 12mm
Phillips Round
Head Screw
A1 = 2 pcs
Soccer Ball
A2 = 1 pc
Allen Wrench
RPFT500GF-H10
RPFT500GF-H11
RPFT500GF-A1
RPFT500GF-A2
!
All Rights Reserved.
© 2014 Escalade Sports
WARNING:
CHOKING HAZARD
Small parts.
Not for children under
3 yrs.
3
For Customer Service Call 1-888-996-2729
P1 = 1 pc
End Apron
P2 = 1 pc
P3 = 2 pcs
Side Apron
P4 = 1 pc
Playfield
RPFT500GF-P1
RPFT500GF-P2
RPFT500GF-P3
RPFT500GF-P4
P5 = 1 pc
Goalflex80 Scoring
Console
P6 = 4 pcs
Leg
P7 = 2 pcs
End Right
Playfield Trim
P8 = 2 pcs
End Left
Playfield Trim
RPFT500GF-P5
RPFT500GF-P6
RPFT500GF-P7
RPFT500GF-P8
TM
End Apron for
Scoring Console
P9 = 2 pcs
Long Side
Playfield Trim
P10 = 4 pcs
Leg Leveler
P11 = 2 pcs
Outside Ball
Entry Cup
P12 = 16 pcs
Rod Bumper
RPFT500GF-P9
RPFT500GF-P10
RPFT500GF-P11
RPFT500GF-P12
P14 = 32 pcs
Plastic Rod Washer
P15 = 8 pcs
Rod Handle
P16 = 8 pcs
Rod End Cap
P17 = 2 pcs
5 Player Rod
RPFT500GF-P14
RPFT500GF-P15
RPFT500GF-P16
RPFT500GF-P17
P19 = 4 pcs
3 Player Rod
P20 = 13 pcs
Red Player
P21 = 13 pcs
Ivory Player
RPFT500GF-P19
RPFT500GF-P20
RPFT500GF-P21
P18 = 2 pcs
2 Player Rod
RPFT500GF-P18
P22 = 4 pcs
Cup Holder
P24 = 1 pc
Scoring Console
Holder
!
RPFT500GF-P22
All Rights Reserved.
© 2014 Escalade Sports
WARNING:
CHOKING HAZARD
Small parts.
Not for children under
3 yrs.
RPFT500GF-P24
4
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
2 pcs - P3 Side Apron
STEP 1:
1 pc - P4 Playfield
Find a clean, level place to begin the assembly of your soccer table. We recommend building the table on the box top
to protect the parts during assembly. It is very important to assemble table on a level and flat surface. This will keep
the end aprons and side aprons “FLUSH” on the top and bottom edges.
With the help of another adult, Place P4 Playfield with graphics facing down as shown in FIGURE 1.
P3
P4
Graphic facing
down.
FIGURE 1
P3
PARTS REQUIRED:
4 pcs - H1 Allen Head Bolt
4 pcs - H2 Flat Washer
1 pc - A2 Allen Wrench
1 pc - P1 End Apron
1 pc - P2 End Apron for
Scoring Console
STEP 2:
With the help of another adult, Attach P1 End Apron and P2 End Apron for Scoring Console using H1 Allen Head
Bolts with H2 Flat Washers as shown in FIGURE 2. Do not tighten H1 Allen Head Bolts on this time.
IMPORTANT NOTE:
FIGURE 2
H1
H1
H2
P4
Make sure PLASTIC GOAL
RAIL slide in end of P4 Playfield
before installing H1 Bolts.
H2
P1
P2
IMPORTANT NOTE:
Make sure PLASTIC GOAL
RAIL slide in end of P4 Playfield
before installing H1 Bolts.
All Rights Reserved.
© 2014 Escalade Sports
H2
H2
H1
H1
5
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
20 pcs - H3 Phillips Round Head Screw
1 pc - A2 Allen Wrench
STEP 3:
Please make sure P4 Playfield is flush with both ends of P1 and P2 End Apron, tighten H1 Allen Head Bolts using A2
Allen Wrench on this time.
Secure P4 Playfield using pre-drilled holes with H3 Phillips Round Head Screws as shown in FIGURE 3.
IMPORTANT NOTE: All screws must be screwed STRAIGHT down. Tighten, but do not strip out H3 Screws.
H3
FIGURE 3
P4
P1
P2
P3
IMPORTANT NOTE:
Bottom of P1/P2 End Apron
and P3 Side Aprons must be
flush with each other before
tightening H1 Bolts.
A2
STEP 4:
Feed the sensor plug from each P1 and P2 End Apron PLASTIC GOAL RAIL through P2 End Apron as shown
in FIGURE 4.
FIGURE 4
P2
All Rights Reserved.
© 2014 Escalade Sports
NOTE: Do not discard wire
ties as they can be used
under table to secure
hanging wires.
6
P1
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
16 pcs - H2 Flat Washer
16 pcs - H4 Allen Head Bolt
4 pcs - P6 Leg
4 pcs - P10 Leg Leveler
1 pc - A2 Allen Wrench
STEP 5:
Attach P6 Legs using H4 Allen Head Bolts with H2 Flat Washers as shown in FIGURE 5.
Use A2 Allen Wrench to tighten H4 Bolts.
Thread P10 Leg Levelers to each P6 Leg as shown in FIGURE 5.
P10
FIGURE 5
P6
H4
H2
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
WHILE TURNING THE TABLE OVER, DO NOT REST THE
TABLE ON THE LEGS AS THIS COULD SEVERELY
DAMAGE THE LEGS.
All Rights Reserved.
© 2014 Escalade Sports
7
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
P8
2 pcs - P7 End Right Playfield Trim
2 pcs - P8 End Left Playfield Trim
2 pcs - P9 Long Side Playfield Trim
P7
P9
P7
P8
P9
STEP 6:
Peel the adhesive strip protective coating off the
underside of P7 End Right Playfiled Trims, P8
End Left Playfiled Trims and P9 Long Side
Playfield Trims, then very carefully place them
along P4 Playfield edges as shown in FIGURE 6.
FIGURE 6
PARTS REQUIRED:
P22
4 pcs - P22 Cup Holder
STEP 7:
Install P22 Cup Holders as shown in FIGURE 7.
FIGURE 7
All Rights Reserved.
© 2014 Escalade Sports
8
For Customer Service Call 1-888-996-2729
13 pcs - H5 Nut
13 pcs - H7 Phillips Round Head Bolt
4 pcs - H10 Phillips Flat Head Bolt
8 pcs - P12 Rod Bumper
PARTS REQUIRED:
16 pcs - P14 Plastic Rod Washer
4 pcs - P15 Rod Handle
4 pcs - P16 Rod End Cap
1 pc - P17 5 Player Rod
STEP 8:
Slide P17 5 Player Rod, P18 2 Player Rod and P19 3 Player
Rods through Rod Bushings of one P3 Side Apron as shown
in FIGURE 8. IMPORTANT NOTE: Please note the
location of the hole that is near one end of each
rod. This is the handle end of the rod.
1 pc - P18 2 Player Rod
2 pcs - P19 3 Player Rod
13 pcs - P20 Red Player
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
P14
P12
P14
Place one P14 Rod Washer, P12 Rod Bumper and
one P14 Rod Washer on each rod as shown in
FIGURE 8.
P20
Place P20 Red Players ( ) on rod as shown in
FIGURE 8.
IMPORTANT NOTE: The goalie should be at
your left and your team (player face) facing to
the right. Looking ahead to FIGURE 12 - will help
you with correct player and rod handle assembly
onto rods.
Place one P14 Rod Washer, P12 Rod Bumper and
one P14 Rod Washer on each rod as shown in
FIGURE 8.
= P20 Red Player
= P12 Rod Bumper
= P14 Rod Washer
P14
P12
P14
P19
P18
2 Player Rod
P17
5 Player Rod
P19
3 Player Rod
P3
Side Apron
3 Player Rod
FIGURE 8
Hole / Handle End
Rod Bushing
Note: Rod Bushings are
already attached onto
each P3 Side Apron.
STEP 9:
Align P20 Red Player to each player hole and attach
using H7 Bolts with H5 Lock Nut as shown in
FIGURE 9 and DETAIL A.
RIGHT
LEFT
P16
Rod End Cap
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
P16
Rod End Cap
Attach P16 Rod End Caps to the rod as shown in
FIGURE 9.
Slide P15 Rod Handle onto each rod end with the
small hole shown in FIGURE 9.
Attach P15 Rod Handle using H10 Bolts as shown
in FIGURE 9.
DETAIL A
H7
P20
Note:
Small Hole
Rod
H5
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P15 Handles.
FIGURE 9
H10
P15
P15
Rod Handle
Rod Handle
All Rights Reserved.
© 2014 Escalade Sports
9
For Customer Service Call 1-888-996-2729
13 pcs - H5 Nut
13 pcs - H7 Phillips Round Head Bolt
4 pcs - H10 Phillips Flat Head Bolt
8 pcs - P12 Rod Bumper
PARTS REQUIRED:
16 pcs - P14 Plastic Rod Washer
4 pcs - P15 Rod Handle
4 pcs - P16 Rod End Cap
1 pc - P17 5 Player Rod
1 pc - P18 2 Player Rod
2 pcs - P19 3 Player Rod
13 pcs - P21 Ivory Player
STEP 10:
OVERHEAD VIEW
Slide P17 5 Player Rod, P18 2 Player Rod and P19 3 Player
LOOKING DOWN ONTO TABLE
Rods through Rod Bushings of one P3 Side Apron as
shown in FIGURE 10.
RIGHT
IMPORTANT NOTE: Please note the location
Hole / Handle End
Rod Bushing
of the hole that is near one end of each rod.
Note: Rod Bushings are
already attached onto
This is the handle end of the rod.
each P3 Side Apron.
Place one P14 Rod Washer, P12 Rod Bumper and
one P14 Rod Washer on each rod as shown in
FIGURE 10.
P19
3 Player Rod
P17
5 Player Rod
LEFT
P19
3 Player Rod
P18
2 Player Rod
Place P21 Ivory Players ( ) on rod as shown in
FIGURE 10.
IMPORTANT NOTE: The goalie should be at your
left and your team (player face) facing to the right.
Looking ahead to FIGURE 12 - will help you with
correct player and rod handle assembly onto rods.
Place one P14 Rod Washer, P12 Rod Bumper and
one P14 Rod Washer on each rod as shown in
FIGURE 10.
= P21 Ivory Player
= P12 Rod Bumper
= P14 Rod Washer
FIGURE 10
STEP 11:
Align P21 Ivory Player to each player hole and attach using
H7 Bolts with H5 Lock Nut as shown in FIGURE 11 and
DETAIL B.
Attach P16 Rod End Caps to the rod as shown in
FIGURE 11.
P15
H10
P15
Rod Handle
Rod Handle
FIGURE 11
Note:
Small
Hole
Slide P15 Rod Handle onto each rod end with the
small hole shown in FIGURE 11.
Attach P15 Rod Handle using H10 Bolts as shown
in FIGURE 11.
DETAIL B
H7
P21
Rod
H5
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P15 Handles.
All Rights Reserved.
© 2014 Escalade Sports
P16
Rod End Cap
10
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
6 pcs - H11 Phillips Round Head Screw
2 pcs - P11 Outside Ball Entry Cup
STEP 12:
Install P11 Ball Entry Cups using H11 Screws as shown in FIGURE 12 and DETAIL C.
Tighten, but do not strip out H11 Screws.
P3
P11
DETAIL C
H11
FIGURE 12
All Rights Reserved.
© 2014 Escalade Sports
11
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
H9
2 pcs - H9 Phillips Round Head Screw
1 pc - P5 Goalflex80 Scoring Console
1 pc - P24 Scoring Console Holder
FIGURE 13
P5
STEP 13:
Feed plugs
through these
holes.
First, feed the sensor plugs from P5 Goalflex80 Scoring
Console through P24 Scoring Console Holder as shown
in FIGURE 13.
Attach P5 Goalflex80 Scoring Console to P24 Scoring
Console Holder using H9 Phillips Round Head Screws
as shown in FIGURE 13.
Important Note: Tighten, but do not strip out H9 Screws.
P24
STEP 14:
Carefully connect P5 Goalflex Scoring Console male connectors to P1 and P2 End Apron GOAL RAIL female
connectors as shown in FIGURE 14.
Scoring
Console
Connector
GOAL
RAIL
Connector
GOAL
RAIL
Connector
Scoring
Console
Connector
FIGURE 14
All Rights Reserved.
© 2014 Escalade Sports
12
For Customer Service Call 1-888-996-2729
PARTS REQUIRED:
4 pcs - H9 Phillips Round Head Screw
STEP 15:
First, feed the connectors back through hole on P2 End Apron and attach P24 Scoring Console Holder using
pre-drilled holes with H9 Phillips Round Head Screws as shown in FIGURE 15.
Important Note: Tighten, but do not strip out H9 Screws.
Install 3 “C” size batteries (not included) into P5 Goalflex80 Scoring Console.
NOTE: Remove these 2
Screws to remove cover
for battery installation.
Reinstall cover + cover
screws after batteries
are installed.
P5
P24
H9
H9
P2
FIGURE 15
GOALFLEX ELECTRONIC SCORER OPERATION:
POWER ON/OFF = Press ON/OFF button to start the Goalflex scoring unit. Long press ON/OFF
button to turn off the Goalflex scoring unit.
GAME TYPE = Press GAME TYPE button to select POWER PLAY, SOLO or DOUBLE game type.
GOAL SIZE = Press GOAL SIZE button to adjust your goal size.
HANDICAP = Press HANDICAP button to select versus mode handicap options.
TIME = Press TIME button to select time options 20 , 15 , 10 or 5 minutes.
AFTER GOAL DELAY = Press AFTER GOAL DELAY button to turn off NON-STOP scores mode.
MUTE = Press MUTE button to turn the sound ON or OFF.
START/PAUSE = Press START/PAUSE button to START or PAUSE the game.
NOTE: If NO GAME TYPE has been select or the START/PAUSE button is not pressed for 3(three)
minutes, the scoring unit will automatically turn off. However we suggest turning the power off when
the game will not be used for an extended period of time.
All Rights Reserved.
© 2014 Escalade Sports
13
For Customer Service Call 1-888-996-2729
Congratulations! You have now assembled your soccer table. Please note the Care and Use
instructions below to insure many years of trouble free use of your soccer table.
CARE AND USE OF YOUR SOCCER TABLE
1. Apply spray furniture polish to a clean cloth and wipe down the rods to make them slide
easier in the rod bushings.
2. Use spray furniture polish to clean all exterior surfaces of your soccer table.
3. Use a carpenters level to properly level table using the leg levelers.
4. This product is intended for INDOOR use only.
5. DO NOT sit, climb or lean on the table.
6. DO NOT drag the table when moving it. This will damage the legs.
7. DO NOT set drinks on the table.
PRODUCT PARTS LIST FOR MODEL # FT500GF
Key #
H1
H2
H3
H4
H5
H7
H9
H10
H11
A1
A2
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P14
P15
P16
P17
P18
P19
P20
P21
P22
P24
C1
Part #
RPFT500GF-H1
RPFT500GF-H2
RPFT500GF-H3
RPFT500GF-H4
RPFT500GF-H5
RPFT500GF-H7
RPFT500GF-H9
RPFT500GF-H10
RPFT500GF-H11
RPFT500GF-A1
RPFT500GF-A2
RPFT500GF-P1
RPFT500GF-P2
RPFT500GF-P3
RPFT500GF-P4
RPFT500GF-P5
RPFT500GF-P6
RPFT500GF-P7
RPFT500GF-P8
RPFT500GF-P9
RPFT500GF-P10
RPFT500GF-P11
RPFT500GF-P12
RPFT500GF-P14
RPFT500GF-P15
RPFT500GF-P16
RPFT500GF-P17
RPFT500GF-P18
RPFT500GF-P19
RPFT500GF-P20
RPFT500GF-P21
RPFT500GF-P22
RPFT500GF-P24
RPFT500GF-C1
All Rights Reserved.
© 2014 Escalade Sports
Description
Qty.
7.5mm x 50mm Allen Head Bolt
8.5mm x 19mm Flat Washer
3.5mm x 25mm Phillips Round Head Screw
7.5mm x 25mm Allen Head Bolt
4mm Nut
4mm x 28mm Phillips Round Head Bolt
3.5mm x 16mm Phillips Round Head Screw
4.8mm x 19mm Phillips Flat Head Bolt
3.5mm x 12mm Phillips Round Head Screw
Soccer Ball
Allen Wrench
End Apron
End Apron for Scoring Console
Side Apron
Playfield
Goalflex80 Scoring Console
Leg
End Right Playfield Trim
End Left Playfield Trim
Long Side Playfield Trim
Leg Leveler
Outside Ball Entry Cup
Rod Bumper
Plastic Rod Washer
Rod Handle
Rod End Cap
5 Player Rod
2 Player Rod
3 Player Rod
Red Player
Ivory Player
Cup Holder
Scoring Console Holder
Rod Bushing
4
20
20
16
26
26
6
8
6
2
1
1
1
2
1
1
4
2
2
2
4
2
16
32
8
8
2
2
4
13
13
4
1
16
14
For Customer Service Call 1-888-996-2729
90 DAY LIMITED WARRANTY
This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS
Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a period of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser
that any Product of its manufacture is free from defects in material and workmanship when used
for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PRODUCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMANSHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS
shall repair or replace with a comparable model, and Product, or component thereof, which may
prove defective under normal use and proper care, and which our examination shall disclose to
our satisfaction to be thus defective, please contact our Warranty Dept.
1-888-996-2729 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at:
[email protected]
Other than shipping requirements no charge will be made for such repair or replacement of inwarranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for
value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES INCURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or
incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
All Rights Reserved.
© 2014 Escalade Sports
15
For Customer Service Call 1-888-996-2729
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement