Quantum Q-6800

Quantum Q-6800
Quantum® Q-6800 Series
Automated Fluid Dispensing System with Advanced Process Controls
Features and Benefits




Large dispense area (423 x 458 mm) is
ideal for a wide-range of substrate sizes
and dual-valve dispensing
Range-finding laser height sensor enables
fast, non-contact dispense height
measurement
Digital vision system with enhanced vision
software for superior imaging detection
Patented Calibrated Process Jetting™
(CPJ) process control automatically
compensates for changes in fluid viscosity
and ensures higher yield
Uncompromizing quality and value
The Quantum Series is the cost effective dispensing solution for customers who demand highest quality
and value for mid- to high-complexity dispensing applications.
With the Quantum system, customers no longer have to choose between acquisition cost and high-quality
dispensing capability.
Benefit from Decades of Dispensing Know-how. From the original jet dispensing company for
electronics assembly, Nordson ASYMTEK’s Total System Solution expertise in platform and dispensing
technologies deliver quality, speed, flexibility and lower cost of ownership.
More Value. The Quantum system includes advanced process management features such as fluid weight
scale, patented Mass Flow Control (MFC)/Calibrated Process Jetting (CPJ) closed-loop process control,
range-finding laser height sensor, digital vision system with enhanced fiducial image processing, and
programmable substrate heat capability.
End-to-end Customer Care. From initial process development through full-scale production, you are
supported by our experienced worldwide engineering, applications development and technical service
network.
Page 1 of 3
Quantum® Q-6800 Series Features
The Quantum dispenser with Nordson ASYMTEK’s applicator technology serves as a reliable and costeffective solution for many demanding fluid dispense requirements for PCBA, SMT and other electronic
assembly applications.
Recommended for:
o
o
o
o
CSP, BGA and board-level underfill
Surface mount adhesives
Corner and edge bonding
Dam and fill
o
o
o
o
Potting and encapsulation
Conductive epoxy
Case assembly
Larger board or substrate sizes
At Nordson ASYMTEK, we deliver the whole package:
Technology + Process Capability + Global Support
®
NexJet 8
Jetting System
DispenseJet
Jet
®
Heli-flow
Pump
®
Patented Mass Flow Control
(MFC)/Calibrated Process
Jetting (CPJ) ensures the right
amount of material is dispensed
for each part from the beginning to
the end of the production run.
Nordson ASYMTEK Applicators have an
established reputation for quality, flexibility
and lower cost of ownership.
Digital Vision System
incorporates easy to use
powerful vision algorithm
for quickly finding and
teaching fiducials even
when that target varies in
size, contrast or rotation.
With DDC
Dynamic Dispense Control
(DDC) provides faster
dispensing without
compromising dispensed line
quality.
Without DDC
Standard
Available
Range-finding Laser Height sensor
Calibration Station
Digital Vision system
Weight Scale with CPJ/MFC
Single applicator support
Dual applicator support
Dual-lane configuration
Fids-on-the-Fly™ software
Pre- and post-queue stations
SECS/GEM interface
Contact Nordson ASYMTEK today and put our expertise to work for you!
Page 2 of 3
2747 Loker Avenue West, Carlsbad, CA, USA 92010-6603
www.nordsonasymtek.com | [email protected]
Quantum® Q-6800 Series Specification Highlights
Dispense Area (X-Y) (1)
Contact us for
detailed product
and wet dispense
specifications:
423 x 458 mm (16.7 x 18.0 in.), single applicator with offsets for vision and height sense
Board Handling (1)
Max. board/carrier length:
One station: 600 mm (23.6 in.);
Three stations: 320 mm (12.6 in.)
25 mm (0.98 in.)
Single lane: 520 mm (20.4 in.);
Dual lane: up to 220 mm (8.6 in.)
25 mm (0.98 in.)
12 mm (0.5 in.)
Min. board/carrier length:
Max. board/carrier width:
Min. board/carrier width:
Max. board/carrier thickness:
Nordsonasymtek.com
North America
Headquarters
Carlsbad, CA, USA
+1.760.431.1919
[email protected]
System Dimensions and Weight
System footprint:
System weight (2):
China
Email: [email protected]
1100 x 1241 mm (43.3 x 48.8 in.)
435-490 kg (960-1080 lbs.)
Standards Compliance
Shanghai
+86.21.3866.9166
SEMI-S2; SEMI-S8; SMEMA; CE
Beijing
+86.10. 8453.6388
(1) Contact factory regarding other travel distance, board/carrier size compatibility
(2) System weight varies depending on configuration
Guangzhou
+86.20.8554.9996
Europe
Maastricht, Netherlands
+31. 43.352.4466
[email protected]
Japan
Tokyo
+81.3.5762.2801
[email protected]
2104
2009
1754
957
Computer
Height
1034
Front
EMO
1060
Flat
Panel
944
To
Passline
India
Chennai
+91. 44.4353.9024
[email protected]
102
Foot
956
1114
1241
136
Side view (mm)
Korea
Seoul
+82.31.765.8337
[email protected]
62
791
155
Conveyor End
Front view (mm)
S.E. Asia/Australia
Singapore
+65.6796.9514
[email protected]
Taiwan
+886.229.02.1860
[email protected]
Published 2015-09-24
Page 3 of 3
2747 Loker Avenue West, Carlsbad, CA, USA 92010-6603
www.nordsonasymtek.com | [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement