XO-XOi-X86-DR-X86T MANUAL - RS232 Manual

XO-XOi-X86-DR-X86T MANUAL - RS232 Manual
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
AMC XO
8 Zone 8 Source Audio Digital Home System
XOi
4 Zone 4 Source Audio Digital Home System
X86
6 Zone 8 Source Audio / Video Digital Home
System
Appendix I
RS232 Manual
1
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
XO/XOi/X86 MANUAL - Appendix
I
RS232 Manual
Table of Contents
1. Table of Contents.........................................................2
2. Serial port specification ...............................................3
• Serial Port Hardware.................................................... 3
• Serial Port Communication Protocol ............................... 3
3. Command set specification ..........................................3
• Command Format........................................................ 3
• COMMAND.................................................................. 3
• RETURN ..................................................................... 3
• ERROR RETURN .......................................................... 3
4. Numbering Format and Range .....................................4
• Zone Number Range .................................................... 4
• Source Select Range .................................................... 4
5. Standard Status Feedback Format ...............................4
• Status Feedback Conditions .......................................... 4
• Status Feedback Format............................................... 4
• Special Conditions ....................................................... 4
6. Command Reference ....................................................5
• Zone Status................................................................ 5
• Tone Control Settings .................................................. 5
• Power OFF.................................................................. 5
• Power ON ................................................................... 5
• Power Toggle .............................................................. 6
• All Zones OFF ............................................................. 6
• Un-mute all Zones ....................................................... 6
• Mute all Zones ............................................................ 7
• Source Select ............................................................. 7
• Adjust Volume ............................................................ 7
• Volume Up 1dB ........................................................... 7
• Volume Down 1dB ....................................................... 8
• Zone Mute OFF ........................................................... 8
• Zone Mute ON ............................................................ 8
• Adjust Bass ................................................................ 8
• Adjust Treble .............................................................. 9
• Group Mode OFF ......................................................... 9
• Group Mode ON .......................................................... 9
2
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
Serial port specification
Serial Port Hardware
• Standard DB9 RS232 connector
Serial Port Communication Protocol
• RS232 asynchronous serial communication
• 38400 bps, 8 bits, 1 stop bit, no parity
• no flow control
Command set specification
Command Format
• All commands are in ASCII characters
• All commands begin with "*" (asterisk) character and end with
<CR> character (0D hexadecimal)
• All commands RETURN with some feedback begin with "*"
(asterisk) character and and end with <CR> character (0D
hexadecimal)
• If a command produces an error or structured with incorrect
syntax, the system will return with "?<CR>" characters
• Multiple commands require a delay of 500ms between commands
COMMAND
RETURN
ERROR RETURN
3
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
Numbering Format and Range
Zone Number Range
• XO: 01-08
• XOi: 01-04
• X86: 01-06
Source Select Range
• XO: 01-08
• XOi: 01-04
• X86: 01-08
Standard Status Feedback Format
Status Feedback Conditions
• Most commands send to the system will receive this type of Status
Feedback unless specified explicitly
• Upon any keypad and IR action, there will be some automatic
feedback from the system:
◦ Keypad: Upon any key presses from keypads in any zones,
the unit will send updated status feedbacks via RS232 port.
◦ IR: Upon any IR commands received from any IR receivers,
the unit will send updated status feedbacks via RS232 port.
Status Feedback Format
RETURN ZNaa,SRCbb,GRPc,VOL-dd
aa = Zone Number
RETURN bb = Source Select
PARAMETERS c = 0 (Group Mode Off), 1 (Group Mode On)
dd = dBs of attenuation (00 – 62 where 62=mute)
Special Conditions
• When a user press and hold the Power Button on any of the
keypads to turn off ALL zones, there will be TWO RS232 responses:
◦ The first response is the normal Status Feedback response:
ZNaa,SRCbb,GRPc,VOL-dd
◦ The second response is the ALL ZONES OFF response:
ZALLOFF
4
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
Command Reference
Zone Status
ACTION
Zone Status Command returns status information on the
given zone
COMMAND ZnnSTA00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Tone Control Settings
ACTION Return tone control settings on the given zone
COMMAND ZNnnSET00
COMMAND
nn = Zone Number
PARAMETERS
RETURN ZNaa,BASSbb,TREBbb,GRPc
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Power OFF
ACTION
Power OFF the given zone (turn off ALL zones in group
mode and leave group mode)
COMMAND ZNnnPWR00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Power ON
ACTION
Power ON the given zone (restore last select source and
volume level)
5
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
COMMAND ZNnnPWR01
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Power Toggle
ACTION Toggle between power On/Off for the given zone
COMMAND ZNnnPWR02
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
All Zones OFF
ACTION Turn off ALL Zones
COMMAND ZALLPWR00
COMMAND
PARAMETERS
RETURN ZALLOFF
RETURN
PARAMETERS
Un-mute all Zones
ACTION Disable mute for ALL Zones
COMMAND ZALLMUT00
COMMAND
PARAMETERS
RETURN ZALLMOFF
RETURN
PARAMETERS
6
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
Mute all Zones
ACTION Apply mute for ALL Zones
COMMAND ZALLMUT01
COMMAND
PARAMETERS
RETURN ZALLMON
RETURN
PARAMETERS
Source Select
ACTION Change a input source for the given zone
COMMAND ZNnnSRCss
COMMAND nn = Zone Number
PARAMETERS ss = Input Source
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Adjust Volume
ACTION Adjust volume for the given zone
COMMAND ZNnnVOLvv
COMMAND nn = Zone Number
PARAMETERS vv = Volume Level (00 - 62 where 62=mute)
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Volume Up 1dB
ACTION Step volume up 1dB for given zone
COMMAND ZNnnVOLUP
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
7
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
Volume Down 1dB
ACTION Step volume down 1dB for given zone
COMMAND ZNnnVOLDN
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Zone Mute OFF
ACTION
Disable mute for the given zone with last volume
preserved
COMMAND ZNnnMUT00
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Zone Mute ON
ACTION
Apply mute for the given zone and memorize the current
volume
COMMAND ZNnnMUT01
COMMAND
nn = Zone Number
PARAMETERS
RETURN Standard Status Feedback Format
RETURN
PARAMETERS
Adjust Bass
ACTION Adjust Bass by +/- 0,4,6,8 dB
COMMAND ZNnnBASsn
nn = Zone Number
COMMAND
s = + or - sign
PARAMETERS
n = Bass Adjustment Level (0,4,6,8)
8
XO-XOi-X86-DR-X86T MANUAL - RS232 Manual - v3.2
RETURN ZNaa,BASSbb,TREBbb,GRPc
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Adjust Treble
ACTION Adjust Treble by +/- 0,4,6,8 dB
COMMAND ZNnnTRBsn
nn = Zone Number
COMMAND
s = + or - sign
PARAMETERS
n = Treble Adjustment Level (0,4,6,8)
RETURN ZNaa,BASSbb,TREBbb,GRPc
aa = Zone Number
RETURN
bb = EQ level +/- 8,6,4,0
PARAMETERS
c = 0 (Group Mode Off), 1 (Group Mode On)
Group Mode OFF
ACTION Disable Group Mode
COMMAND ZALLGRP00
COMMAND
PARAMETERS
RETURN GRPOFF
RETURN
PARAMETERS
Group Mode ON
ACTION Activate Group Mode
COMMAND ZALLGRPss
COMMAND
ss = Input Source for this group (01 - 04/08)
PARAMETERS
RETURN GRPON,STCss
RETURN
ss = Input Source selected for this group
PARAMETERS
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement