OTP-4V8BA 12-Bit Composite Video and Analog Audio DATASHEET FIBER OPTICS Composite Video and Analog Audio Transmission The Optiva OTP-4V8BA provides for the transmission of 4 channels of 12-Bit composite video and 8 channels of analog audio, over long or short distances, using a single fiber. In addition, the OTP-4V8BA is part of our innovative Optiva video, audio and data media transport system. Optiva was designed to maintain lossless fiber extension between input and output signals. New signals may be added without the need for additional fiber through our proprietary daisy-chain technology. The Optiva line of products also includes insert cards for up to 16 channels of multiplexing / demultiplexing, 16x16 matrix switching, optical Features System Design SMPTE Compliant Optiva insert cards support both 19” 12-Bit Composite Video over Fiber rackmount and compact tabletop or Analog Audio over Fiber (Terminal Block) Singlemode Options (up to 70 km) insert cards as well as dual-redundant, hot-swappable power supplies utilizing Multimode Options (up to 2 km) two 100 watt or two 200 watt power supplies. Also available in the rackmount TDM - Single Wavelength No EMI, RFI, or Ground Loops 3-Year Warranty ROHS Compliant Applications High-Quality Video Security Systems Video Surveillance Train/Rail Station Camera Systems CCTV Applications Optical NTSC/PAL Video Switching wall-mountable enclosures. The 3RU 19” rackmount enclosures (Models: OT-CC-16 & OT-CC-16F) can support up to 16 form factor is our 1RU enclosure (Model: OT-CC-6-1U) which can accomodate six insert cards and utilizes two 60 watt power supplies. For desktop or wall mounting applications there are one-slot (Model: OT-DTCR-1) and two-slot (Model: OT-DTCR-2) enclosures. Both use an external wall mount power supply. Enclosure Options U.S. Patent #’s 7720385 & 8064773 © 2012 Emcore Corporation. REV 2012.03.25 626 293 3400 [email protected] www.emcore.com/opticomm EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation. OTP-4V8BA 12-Bit Composite Video and Analog Audio DATASHEET FIBER OPTICS Models General Transmitter Receiver Specifications Values OTP-4VT8BAT-XX-YY OTP-4VR8BAR-XX-YY Dimensions (Insert Card) 6.69”L x 0.81”W x 5.06”H OTP-4VT8BAT-L4x1-YY OTP-4VR8BAR-L4x1-YY Weight 11 oz. OTP-4VT8BAT-NOC OTP-4VR8BAR-NOC Operating Temperature -20˚C to +55˚C When ordering replace “XX” with one of the Optical Codes Storage Temperature -40˚C to +85˚C When ordering replace “YY” with one of the Connector Options Humidity 0 to 95% (Non-Condensing) Contact us for this chart: When ordering CWDM, replace “x” in the Optical Code L4x1 with A (1270 nm) through R (1610 nm) Operating Voltage 12 VDC NOC: non-optical card Power Consumption 6 Watts Chromatic dispersion as well as other losses should also be taken into account Bit Error Rate 10-14 Stated distances are the maximum range, shorter distance may require attentuation Standard connection type is UPC System Latency < 1 ms Warranty 3 year Simplex Optical Specifications Optical Code “XX” Fiber Type / Number Min. Output Power (dBm) Rx Sensitivity (dBm) Optical Budget (db) Distance (km) A0 MM/1 850 -10 -17 7 0.5 LC, SC, ST, FC A1 MM/1 1310 -5.5 -10.5 5 2 Wavelength (nm) Connector Options “YY” Video Specifications Values Standards SMPTE 170, RS-250C (Short Haul) LC, SC, ST, FC Bit Resolution 12-Bit Digital Transmission A2 SM/1 1310 -5.5 -12.5 7 10 LC, SC, ST, FC Level 1.0 Volt p-p A2D SM/1 1310 -5.5 -17.5 12 20 LC, SC, ST, FC Bandwidth 5.5 MHz A3 SM/1 1550 -3.5 -20.5 17 40 LC, SC, ST, FC Differential Gain < 2% A3D SM/1 1550 0 -25 25 60 LC, SC, ST, FC Differential Phase < 0.7° L4x1 SM/1 1270 to 1610 (CWDM) -2.5 -27.5 25 50 to 70 LC, SC, ST, FC Compatibility NTSC, PAL, SECAM Signal to Noise Ratio > 67 dB Connector BNC (IEC 60169-8) Connection Diagram Pin 1: Out + Pin 2: Out Pin 3: In + Pin 4: In Pin 5: GND Pin 6: In Pin 7: In + Pin 8: Out - Audio Ch. 1 Ch. 2 Pin 9: Out + ST, FC, SC or LC Optical Connectors Values Level 18 dBm In/Out Bandwidth 20 Hz to 20 KHz Signal to Noise Ratio > 80 dB Total Harmonic Distortion < 0.1% Signal Coding 24-bit Connector Terminal Block Monitoring & Control 12-Bit Composite Video Inputs 12-Bit Composite Video Inputs Specifications Audio In/Out Specifications Values Local Front panel LED status and alert indicators Remote OptivaView SNMP Management Suite* Requires OptivaView SNMP Controller Card (Model: OPV-CTLR) Audio In/Out Audio In/Out Audio In/Out Audio In/Out Compliance OTP-4VT8BAT © 2012 Emcore Corporation. REV 2012.03.25 OTP-4VT8BAT 626 293 3400 [email protected] www.emcore.com/opticomm EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.